ULTRA-SAFE EXP. Applications E X P L O S I O N - P R O O F H E A T E R S

Size: px
Start display at page:

Download "ULTRA-SAFE EXP. Applications E X P L O S I O N - P R O O F H E A T E R S"

Transcription

1 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S Applications Aircraft Hangars/Service Areas hemical Storage/Handling Areas oal Preparation Plants ompressor Stations Grain Elevators Oil Refineries and Rigs Paint Storage Areas Petrochemical Plants Sewage Pump Stations/ Treatment Plants Spray Booths lass I, Divisions and, Groups and D lass II, Divisions and, Groups E, F and G lass I, Zones and, Group IIB Temperature ode T, 0 F (60 ) INDEEO s ULTRA-SAFE EXP explosion-proof unit heater is designed with both safety and versatility in mind. Unique ULTRA-SAFE EXP features include: Industry s Lowest Ignition Temperature ode Rating: T, 0 F (60 ) Dual Overtemperature Protection: With both automatic and manual reset overtemperature cutouts for additional safety. Nontoxic Propylene Glycol Heat Transfer Fluid Low 70 PSIG Relief Valve Setting: This assures that in an emergency, the initial escaping vapor temperature remains below the 0 F (60 ) ignition temperature. orrosive Resistant Options: INDEEO offers three constructions suitable for most applications. Standard construction for use in dry non-corrosive areas includes: welded steel heat exchanger; powder-coated cabinet; epoxy-coated motor. A 6 stainless steel construction suitable for Waste Water Treatment Plants includes: 6 stainless steel heat exchanger, headers and tubes with aluminum fins; stainless steel cabinet; corrosive resistance hardware; epoxy-coated motor. Third construction is suitable for use in hemical Plants where chlorides are present and includes: Heresite coated heat exchanger, cabinet, fan blade; corrosive resistance hardware; epoxy-coated motor. Standard onstruction Features Heat Exchanger Efficient liquid-to-air design utilizes an all welded steel headers and finned tube construction with spiral wound aluminum fins. Industrial grade INDEEO heating elements are immersed in a nontoxic, inhibited, propylene glycol heat transfer fluid that provides freeze protection down to -49 F (-45 ). The heat exchanger is hydrostatically tested at 50 psig. A pressure relief valve provides excess pressure protection and is set at 70 psig. Fan Motor Assembly onsists of an explosion-proof motor fitted with an aluminum fan blade. The motor has double-shielded, permanently lubricated ball bearings and automatic reset line breaking thermal overload protection. Motors furnished on standard units operate at line voltage and are prewired to the control enclosure so separate field wiring to the motor is not required. The standard motor is rated for lass I, Groups and D, lass II, Groups F and G. The minimum operating temperature is -4 F (-5 ) and the minimum storage temperature is -49 F (-45 ). Optional motor ratings are described on page 9. abinet/louvers Industrial grade, corrosion resistant construction fabricated from powder coated 4-gauge galvanized steel. The adjustable louvers have minimum opening safety stops. ontrols Factory mounted on the unit heater. Standard built-in controls include automatic and manual reset overtemperature cutouts, controlling magnetic contactor, 4-volt control circuit transformer and incoming power terminal blocks housed in a NEMA 7, 9 cast aluminum enclosure

2 U N I T ULTRA-SAFE EXP Factory Built-in Options ode Option Description D E H 6 Stainless Steel orrosion Resistant onstruction (Waste Water Treatment Plants) Dirty Duty orrosion- Resistant onstruction (hemical Plants) Disconnect Switch Group E (Metal Dust ) onstruction 50 Hertz Motor 6 Stainless steel heat exchanger with aluminum fins, 6 stainless steel cabinet; aluminum fan blade; cast aluminum NEMA 4X, 7, 9 control enclosure; corrosionresistant hardware; corrosion-resistant protective coated motor which has passed the TM B7 salt-spray test. Epoxy-coated motor; Heresite coated heat exchanger cabinet and fan blade; cast aluminum NEMA 4X, 7, 9 control enclosure; corrosion resistant hardware; corrosionresistant protective coated motor which has passed the TM B7 salt-spray test. Factory installed on the unit heater beside the control enclosure. This is an inexpensive and positive way to meet NE/E requirements for a disconnecting means within sight of the heater. lass II, Group E (Metal Dust) onstruction Temperature ode T, 0 F (60 ) Optional motors for international requirements. ontact factory for KW availability. ode () S E X P L O S I O N - P R O O F S K "Warning" Pilot Light Indicates when the thermal cutouts have tripped and the unit heater needs servicing. L "Heater On" Pilot Light Indicates when the electric heating elements are energized. M Manual Reset Thermal utout with Backup ontactor A pilot duty manual reset thermal cutout with a backup contactor is provided for independent secondary overtemperature protection. This option cannot be provided if option ode S or V are also specified. S Auto/Fan Selector Switch A two-position switch wired to the control circuit for auto (automatic heat) and fan only control. This selector switch cannot be provided if option ode M or V are also specified. T Adjustable Thermostat Factory installed and prewired to the control enclosure. Thermostat is adjustable from 50 to 90 F (0 to ) range. S V 0 Volt ontrol ircuit an be provided when required for special external thermostat circuit. This option cannot be provided if option ode S or M are also specified. Nor can both K and L be specified. () S = Stock, = Assembly Stock, = ustom Stock heaters ordered with assembly stock or custom options subject to longer delivery

3 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S Accessory Items ULTRA-SAFE EXP Heater Mounting Kits These are available for ceiling, wall and pole mounting configurations as described below. Specify type required and catalog number at time of order entry..5 (6.5) MH ULTRA-SAFE EXP Explosion-proof Unit Heater 6-/8" (59.76 mm) 5" (7 mm) ULTRA-SAFE EXP Explosion-proof Unit Heater MW 5" (7 mm) ULTRA-SAFE EXP Explosion-proof Unit Heater eiling Mounting Kit Wall Mounting Kit Pole Mounting Kit MW Size MH In. (mm).06 (8) 5.06 (8.6) 9.06 (484.) MW In. (mm) 9 (8.6) 7 (77.8) 5 (7) Unit Heater Mounting Kits (One kit required per heater) Mounting Kits for use with Standard Heater Powder oated onstruction atalog Number Description eiling Mounting Kit, for Frame Sizes,, Wall Mounting Kit, for Frame Size,, Pole Mounting Kit, for Frame Size,, Week Unit Heater Mounting Kits (One kit required per heater) Mounting Kits for use with Heaters which include optional orrosion Resistant odes and atalog Number 045-S 0454-S 0455-S Description orrosion Resistant eiling Mounting Kit, for Frame Sizes,, orrosion Resistant Wall Mounting Kit, for Frame Size,, orrosion Resistant Pole Mounting Kit, for Frame Size,, Week For corrosion resistant option, add - S to the end of item number. Remote Room Thermostat Use catalog number See page

4 U N I T ULTRA-SAFE EXP Dimensions, Airflows and Weights Overall Heater Dimensions Airflow haracteristics Motor/Fan Weight KW Range X In. (mm) Y In. (mm) Z In. (mm) FM (M/Hr) Throw Ft. (m) RPM HP Fan Diameter In. (mm) Net Lbs (Kg) Shipping Lbs (Kg) Size Size Size -5 KW KW 5 KW 0 KW 5 KW 0 KW 8.5 (46.55) 9.75 (49.5) 6.06 (408) (4.5) 5 (7.6) /4 (04.8) 0 (49.89) 0 (58.96) 8.5 (46.55).75 (59.75) 0.88 (5.775) (.7) 75 /4 6 (406.4) 50 (68.0) 69 (76.65) 0.00 (508) 7.75 (695.5) 4.88 (64.75) (9.8) 75 (.8) / 0 (508) 90 (86.8) 6 (97.97) E X P L O S I O N - P R O O F S Y X Side View 6-/4" Z Front View

5 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S ULTRA-SAFE EXP Unit Heater Listing KW Volts Phase Total Amps () Frame Size Approximate Air Temperature Rise F ( ) 5 (8) 5 (8) 5 (8) 5 (8) 5 (8) 5 (8) 5 () 5 () 5 () 5 () 5 () 5 () 8 (6) 8 (6) 8 (6) 8 (6) 8 (6) 8 (6) 8 () 8 () 8 () 8 () 8 () 7 (5) 7 (5) 7 (5) 7 (5) 5 (9) 5 (9) 6 (4) 6 (4) 5 () 5 () lass I, Divisions and, Groups and D lass II, Divisions and, Groups F and G lass I, Zones and, Group IIB Temperature ode T, 0 F (60 ) atalog Number -FA-006 -FA-006J -FA-006D -FA-006K -FA-006U -FA-006Z -FA FA-0056J -FA-0056D -FA-0056K -FA-0056U -FA-0056Z -FA FA-0086J -FA-0086D -FA-0086K -FA-0086U -FA-0086Z -FA-006J -FA-006D -FA-006K -FA-006U -FA-006Z -FB-056D -FB-056K -FB-056U -FB-056Z -FB-006U -FB-006Z -F-056U -F-056Z -F-006U -F-006Z Week () Total Amps = Heating element amps and motor amps

6 U N I T Standard - Non-corrosive applications Aircraft Hangars/Servicing Areas oal Mines/Preparation Plants Gasoline Fueling/Storage Areas Paint Spraying/Storage Areas Utility Plants ULTRA-SAFE EXP Explosion-Proof Unit Heater Three onstructions to hoose From; Standard, Stainless Steel or Heresite Standard 4VA transformer ontactor Automatic and manual reset overtemperature thermal cutouts Heavy 4-Gauge abinet Powder coated - standard 6 stainless steel or Heresite coated - options Optional 6 Stainless Steel or Heresite oating hemical Plants hemical Storage/Handling Areas Food Processing Plants Oil Refineries Petrochemical Plants Sewage Treatment/Wastewater Treatment Plants Adjustable louvers Finger safe fan guard split construction for easy removal for field servicing. E X P L O S I O N - P R O O F S Optional Disconnect switch with lockout Fan selector switch Thermostat Thermally-protected explosion-proof motor with heavy-gauge aluminum fan blade designed for easy field servicing. Designed for Easy Servicing Removable core Split fan guard Easy access to motor and fan Replaceable automatic and manual thermal cutouts Threaded control enclosure Heater ore All welded construction with: Painted steel heaters with steel tubes and spiral wound aluminum fins - standard 6 stainless or heresite construction - options ore can be easily removed through bottom of cabinet Heresite is a registered trademark of Heresite Protective oatings, Inc

Ultra-Safe EXP Unit Heater

Ultra-Safe EXP Unit Heater INDEEO s ULTRA-SAFE EXP explosion-proof unit heater is designed with both safety and versatility in mind. Unique ULTRA-SAFE EXP features include: Industry s Lowest Ignition Temperature ode Rating: T3,

More information

ULTRA-SAFE Explosion-proof Duct Heaters

ULTRA-SAFE Explosion-proof Duct Heaters Standard Construction Heat Exchanger has copper tubes with integral aluminum fins. Each unit undergoes hydrostatic testing at 350 psig, five times the pressure relief valve setting of 70 psig. Heat Transfer

More information

FX5 Series Explosion-Proof Electric Air Heaters

FX5 Series Explosion-Proof Electric Air Heaters FX5 Series Explosion-Proof Electric Air Heaters Ruffneck FX5 heaters are C UL US certified for use in hazardous locations. They are designed for the harshest environments such as: dry indoor industrial

More information

ULTRA-SAFE Explosion-proof Duct Heaters

ULTRA-SAFE Explosion-proof Duct Heaters Standard Construction Heat Exchanger has copper tubes with integral aluminum fins. Each unit undergoes hydrostatic testing at 350 psig, five times the pressure relief valve setting of 70 psig. Heat Transfer

More information

FE1 Explosion-Proof Electric Air Heaters

FE1 Explosion-Proof Electric Air Heaters Explosion-Proof Electric Air Heaters The heater core assembly is contained in a sturdy, epoxy-coated, 14-gauge steel cabinet which also carries the motor and fan assembly. Adjustable louvers allow directional

More information

Comfort. Description. Applications

Comfort. Description. Applications Blower Heater 3-35 kw 10,00-119,40 Btuh 40 to 90 Volts, 50/0 Hz 31 Stainless Steel Case Shown 3 Phase ATEX, GOST, CE IIG Exd IIB T3 Description Type is designed to heat areas classified as hazardous locations

More information

Stars Management JLT SUBMITTAL. EXPLOSION PROOF ELECTRIC AIR HEATER (FX Series)

Stars Management JLT SUBMITTAL. EXPLOSION PROOF ELECTRIC AIR HEATER (FX Series) Stars Management JLT SUBMITTAL EXPLOSION PROOF ELECTRIC AIR HEATER (FX Series) Tel: 00971 (04) 457 2383 Fax: 00971 (04) 457 2382 P.O. Box: 25867 Dubai U.A.E. E-mail: info@starsmanagementjlt.com Website:

More information

Explosion-Proof and Fan-Forced Unit Heaters. Our products do more in a wide range of applications. Expect More.

Explosion-Proof and Fan-Forced Unit Heaters. Our products do more in a wide range of applications. Expect More. Explosion-Proof and Fan-Forced Unit Heaters Our products do more in a wide range of applications. Expect More. Introduction/Table of Contents Indeeco offers commercial and industrial electric heating and

More information

Brasch Hazardous Location Unit Heaters

Brasch Hazardous Location Unit Heaters Brasch Hazardous Location Unit Heaters BHUH Features Designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to the presence of certain

More information

AEU1. Explosion-Proof Electric Air Heater For Hazardous Locations

AEU1. Explosion-Proof Electric Air Heater For Hazardous Locations AEU1 Explosion-Proof Electric Air Heater For Hazardous Locations 0518 II 2G, Ex d IIB T4 Gb IP55 (ATEX) Ex d IIB T4 Gb IP55 (IECEx) 1ExdIIBT4 X IP55 (EAC Ex) (Suitable for ATEX/IECEx/EAC Ex Zone 1 & 2)

More information

Explosion-Proof Forced Air Unit Heater - XGB

Explosion-Proof Forced Air Unit Heater - XGB Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.

More information

XGB Unit Heater. Certification. Model Coding XGB 038 T3B 3 1 T TEMPERATURE CODE T3B (165 C) T3A (180 C) T2D (215 C) T2C (230 C)

XGB Unit Heater. Certification. Model Coding XGB 038 T3B 3 1 T TEMPERATURE CODE T3B (165 C) T3A (180 C) T2D (215 C) T2C (230 C) The Norseman Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions. Norseman unit heaters are available

More information

Explosion-Proof Forced Air Unit Heater - XGB

Explosion-Proof Forced Air Unit Heater - XGB Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.

More information

Description. Applications

Description. Applications CXH-EP PDS CXHEP Convection Explosion Proof Heater Electric Blower For Hazardous Locations Unit for Hazardous 3 to 35kW 10,200 to 119,420 BYU/Hour NORTH AMERICAN RATINGS 208 to 600 Volts 1.8 to 9.0kW (T-2A)

More information

CR1 Series Triton Corrosion Resistant Washdown Heaters

CR1 Series Triton Corrosion Resistant Washdown Heaters CR1 Series Triton Corrosion Resistant Washdown Heaters Ruffneck CR1 Triton Series is a new generation of NEMA 4X corrosion-resistant washdown heaters. The first UL listed Type 4X heater with models ranging

More information

Description. Applications

Description. Applications CVEP PDS CVEP Convection for Hazardous Heater For Locations Hazardous Locations Convection Heater 1.8 to 9.0kW (T-2A) 280 C (536 F) 1.6 to 4.0kW (T-3A) 180 C (356 F) 1.8 to 9.0kW (T-2) 1.8 300 C to 9.0kW

More information

TABLE OF CONTENTS. FCV Nomenclature 3. FCV Features & Construction 4. FCV Engineering Specifications 5. FCV Fan/Coil Data 6

TABLE OF CONTENTS. FCV Nomenclature 3. FCV Features & Construction 4. FCV Engineering Specifications 5. FCV Fan/Coil Data 6 TABLE OF CONTENTS Page FCV Nomenclature 3 FCV Features & Construction 4 FCV Engineering Specifications 5 FCV Fan/Coil Data 6 FCV Unit Weights and Volumes 7 FCV Fan and Motor Data 8-9 Dimensions 10-14 Standard

More information

XEU1. Explosion-Proof Electric Air Heater For Hazardous Locations

XEU1. Explosion-Proof Electric Air Heater For Hazardous Locations 235730 XEU1 3k mode W ls ther m & new now a ostats vailab le! Explosion-Proof Electric Air Heater For Hazardous Locations Class I, Division 1 & 2, Groups C & D Class II, Division 1 & 2, Groups F & G Temperature

More information

HLA Series Hazardous Location Fan Forced Unit Heater

HLA Series Hazardous Location Fan Forced Unit Heater Products Company Markel Products Company Markel Products Company Markel Products Co HLA Series Hazardous Location Fan Forced Unit Heater FAN-FORCED SUSPENDED UNIT HEATERS 3-25 KW FOR CLASS I, GROUP C &

More information

Description. Construction

Description. Construction LUH LUH PDS Horizontal Unit Heater 2.6 to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)

More information

HLA Series Hazardous Location Fan Forced Unit Heater

HLA Series Hazardous Location Fan Forced Unit Heater HLA Series Hazardous Location Fan Forced Unit Heater FAN-FORCED SUSPENDED UNIT HEATERS 3-25 KW FOR CLASS I, GROUP C & D, DIVISION 1 & 2 AND CLASS II, GROUPS E, F & G, DIVISIONS 1 & 2. Shown with optional

More information

KUH. Horizontal Unit Heater. Applications. Description

KUH. Horizontal Unit Heater. Applications. Description KUH KUH PDS Horizontal Unit Heater 2.6 kw to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)

More information

Toll-Free: TPI CORPORATION Hazardous Location Fan Forced Unit Heater

Toll-Free: TPI CORPORATION Hazardous Location Fan Forced Unit Heater Toll-Free: 1-800-462-4983 Hazardous Location Fan Forced Unit Heater 3-25KW for Class I, Group C & D, Division 1 & 2 and Class II, Groups E, F & G, Divisions 1 & 2. Designed for rugged industrial applications

More information

HLA Series Hazardous Location Fan Forced Unit Heater Data Sheet

HLA Series Hazardous Location Fan Forced Unit Heater Data Sheet General Characteristics of Hazardous Location ofan Forced Heater HLA Series The HLA Series is designed for rugged industrial applications in hazardous locations where the possibility of explosions or fire

More information

Thermal Devices, Inc. Mount Airy, Maryland USA

Thermal Devices, Inc. Mount Airy, Maryland USA Unit Heater 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Wall or Ceiling Mounted Canadian Standards Standards Description The Chromalox self-contained blower heater provides

More information

Industrial Air Heaters

Industrial Air Heaters HVH Horizontal or Vertical Discharge Fan Forced Unit Heater Industrial Air Heaters 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Vertical or Horizontal Airflow Wall or Ceiling

More information

TECHNICAL GUIDE DESCRIPTION SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 FEATURES B-0703

TECHNICAL GUIDE DESCRIPTION SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 FEATURES B-0703 TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 DESCRIPTION These Sunline 2000 units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging.

More information

HUH2. Hydronic Unit Heater CRN: 0H C 400 psig (2758 KPa) Industrial Grade Heat-Exchanger Unit Heaters

HUH2.   Hydronic Unit Heater CRN: 0H C 400 psig (2758 KPa) Industrial Grade Heat-Exchanger Unit Heaters Available with reversible core connection feature! HUH2 36 inch fan size model now available! Hydronic Unit Heater CRN: 0H14933.2C 400 psig (2758 KPa) Industrial Grade Heat-Exchanger Unit Heaters www.hazlocheaters.com

More information

EXH Series Explosionproof Electric Air Heaters

EXH Series Explosionproof Electric Air Heaters EXH Series Electric Air Heaters Cl. I, Div. & 2, Groups C, D Cl. II, Div., Groups E, F, G NEMA 7CD, 9EFG EXH explosionproof electric heaters are used: In areas made hazardous by the presence of flammable

More information

Pipe Thread Heaters. Construction Features. 1" 2-1/2" Pipe Thread Heaters

Pipe Thread Heaters. Construction Features. 1 2-1/2 Pipe Thread Heaters Construction Features 1" 2-1/2" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging of hex, thread and riser assures reliability. Element

More information

MAC N-407 Air-Cooled Chiller

MAC N-407 Air-Cooled Chiller MAC036-01-N-407 Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial MicroClimates MAC036 NOMENCLATURE BREAKDOWN MAC036-01 - N - 407 Refrigerant Type Air-Cooled Chiller 036=

More information

Explosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts.

Explosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts. EXUB Explosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts. Forced-Air Heater for Hazardous Locations Class I, Divisions 1 & 2, Groups

More information

Type UB-2502A and UB-3002A Forced-Air Heater

Type UB-2502A and UB-3002A Forced-Air Heater Installation, Operation and RENEWAL PARTS IDENTIFICATION 4 (Supersedes PF423-3) JULY, 2002 Type UB-2502A and UB-3002A Forced-Air Heater UB PF423-4 161-027048-001 Figure 1 (Wall Mounted) Figure 2 (Ceiling

More information

LUH HORIZONTAL FAN-FORCED UNIT HEATER

LUH HORIZONTAL FAN-FORCED UNIT HEATER LUH HORIZONTAL FAN-FORCED UNIT HEATER VERSATILE, FAN-FORCED HEATING FOR COMMERCIAL AND INDUSTRIAL COMFORT HEAT APPLICATIONS Horizontal airflow Wall or ceiling mounting Self-contained Totally enclosed fan

More information

Custom Duct Heaters. Special Applications

Custom Duct Heaters. Special Applications Special Applications Air Conditioning & Air Handling Units For more than 55 years, INDEECO has been supplying special heaters for use in air handling and air conditioning equipment (Figure 49). A wide

More information

Electric Unit Heaters for Standard and Hazardous (Classified) Locations

Electric Unit Heaters for Standard and Hazardous (Classified) Locations 2-116. January, 07 Electric Unit eaters for Standard and azardous (Classified) Locations MODEL ER MODEL VE MODEL PTE MODEL EX table of contents Table of Contents Page Electric Unit eaters - Models ER,

More information

Owner s Manual. FX4 Series. Electric Forced Air Heaters for Hazardous Locations

Owner s Manual. FX4 Series. Electric Forced Air Heaters for Hazardous Locations Owner s Manual FX4 Series ISO 9001 Electric Forced Air Heaters for Hazardous Locations This manual covers the installation, maintenance, repair and replacement parts. approved Locations The Electric Forced

More information

Electric Unit Heaters

Electric Unit Heaters Electric Unit Heaters Model UHEC Horizontal Discharge Model UHEC Vertical Discharge Model UHRA Hose-Down Model UHXA Explosion-Proof December 2001 Features and Benefits Model UHEC Electric Unit Heaters

More information

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes). Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage

More information

SECTION AIR COILS

SECTION AIR COILS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 82 16 AIR COILS SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in the section

More information

CX1 ProVector Explosion-Proof Heaters

CX1 ProVector Explosion-Proof Heaters Explosion-Proof Heaters For hazardous locations heating, rely on the for the most dependable, troublefree service available. CCI Thermal Technologies Inc. manufactures explosion-proof air heaters to satisfy

More information

MACH N-407 Heat Pump Air-Cooled Chiller

MACH N-407 Heat Pump Air-Cooled Chiller MACH060-01-N-407 Heat Pump Air-Cooled Chiller Heat Pump Air-Cooled Chillers for Global Residential and Light Commercial Microclimates MACH NOMENCLATURE BREAKDOWN MACH-060-01 - N - 407 Refrigerant Type

More information

UHIR Series. Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater. Owner s Manual

UHIR Series. Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater. Owner s Manual UHIR Series Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater Owner s Manual This manual covers installation, maintenance and repair parts. Read carefully before attempting to

More information

Pipe Thread Heaters. Construction Features. Star Electric to Order Call " 2-1/2" Pipe Thread Heaters

Pipe Thread Heaters. Construction Features. Star Electric to Order Call  2-1/2 Pipe Thread Heaters Pipe Thread Heaters Construction Features " -/" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging hex, thread and riser assures reliability.

More information

CHS. Product Specifications COMMERCIAL SPLIT SYSTEMS HEAT PUMP UNITS R 410A, 6 10 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE

CHS. Product Specifications COMMERCIAL SPLIT SYSTEMS HEAT PUMP UNITS R 410A, 6 10 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE COMMERCIAL SPLIT SYSTEMS HT PUMP UNITS R 410A, 6 10 TONS BUILT TO LAST, SY TO INSTALL AND SERVICE Single stage cooling capacity control on all models All models utilize round copper tube, aluminum plate

More information

CXH-A Forced-Air Heater

CXH-A Forced-Air Heater Installation and Operation Instructions CXH-A Forced-Air Heater CXH-A-0 EP to CXH-A-5 EP Class I - Groups C & D, Div. & 2 Class II - Groups E, F & G TB - 65 C (29 F) PF490-6-0242-004 July 20 Table A -

More information

FX5 SD Series Electric Forced Air Heaters for Hazardous Locations

FX5 SD Series Electric Forced Air Heaters for Hazardous Locations Owner s Manual FX5 SD Series Electric Forced Air Heaters for Hazardous Locations ISO 9001 This manual covers the installation, maintenance, repair and replacement parts. APPROVED LOCATIONS The Electric

More information

Tubular Industrial Process

Tubular Industrial Process consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Standard Screw Plug

More information

1.1 This section applies to air handling units for HVAC Systems.

1.1 This section applies to air handling units for HVAC Systems. AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling

More information

SECTION ROTARY-SCREW WATER CHILLERS

SECTION ROTARY-SCREW WATER CHILLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Factory-assembled packaged chiller. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled water connections. E. Electrical power connections.

More information

CAS. Product Specifications. COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 12.5 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE

CAS. Product Specifications. COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 12.5 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 12.5 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE CAS Product Specifications Single stage cooling capacity control on all models with Micro channel

More information

MAC-120HE-03 Air-Cooled Chiller

MAC-120HE-03 Air-Cooled Chiller MAC-120HE-03 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 380/415/460-3-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-03

More information

100 TON AIR-COOLED SCROLL PACKAGED. Call us today! (800) SPECIFICATIONS GENERAL DIMENSIONS ELECTRICAL DATA ADDITIONAL INFORMATION

100 TON AIR-COOLED SCROLL PACKAGED. Call us today! (800) SPECIFICATIONS GENERAL DIMENSIONS ELECTRICAL DATA ADDITIONAL INFORMATION 100 TON AIR-COOLED SCROLL PACKAGED SPECIFICATIONS Call us today! (800)341-4297 Trane Portable Packaged Air Conditioner units contain the best compressor technology available, in order to achieve the highest

More information

60 TON AIR-COOLED CHILLER. Call us today! (800) PA-ACCTR-60 GENERAL DIMENSIONS ELECTRICAL DATA 60 TON AIR-COOLED CHILLER FEATURES

60 TON AIR-COOLED CHILLER. Call us today! (800) PA-ACCTR-60 GENERAL DIMENSIONS ELECTRICAL DATA 60 TON AIR-COOLED CHILLER FEATURES 60 TON AIR-COOLED CHILLER PA-ACCTR-60 Call us today! (800)341-4297 The 60-Ton portable chiller package features a Trane CGAM chiller unit. Trane leads the industry in providing some of the most reliable,

More information

CF1 ProVector Explosion-Proof Heaters

CF1 ProVector Explosion-Proof Heaters CF1 ProVector Explosion-Proof Heaters The CF1 Series ProVector Explosion-proof convection heater offers the most reliable, dependable and trouble-free service available for heating hazardous locations

More information

Product Specifications. Vertical Floor Consoles By First Co.

Product Specifications. Vertical Floor Consoles By First Co. NOW WITH 18 GAUGE CABINET AND FACTORY INSTALLED SERVICE SWITCH Product Specifications VFB Series VSB Series VCB Series Vertical Console Fan Coils 300-00 CFM Vertical Floor Consoles By First Co. VFB Series

More information

Portable Vertical Air-Conditioning and Heating Systems

Portable Vertical Air-Conditioning and Heating Systems Portable Vertical Air-Conditioning and Heating Systems Specifications for 10 Ton Units 208 230 volt 7 1 77 77 77 33 Front Side Back 77 71 / 77 Front 33 Side 2 Cabinet Features: Heating and Cooling Data:

More information

240 Series Unit Heater SameDay Shipping

240 Series Unit Heater SameDay Shipping SameDay Shipping Now Available on Select s The unit heater is available in four unit sizes with 9 standard models with ratings up to 0 KW at voltages of 20, 240, 277, 40 and 600 single or three-phase.

More information

AEU1 Electric Forced-Air Explosion-Proof Heater Owner s Manual, Version: AEU1-OM-B This manual covers installation, maintenance, repair, and replacement parts. Forced-Air Heater for Hazardous Locations

More information

Product Chillers A P P L I C AT I O N S

Product Chillers A P P L I C AT I O N S Product Chillers A P P L I C AT I O N S Wineries Bottling Product Storage Product Ripening Meat Processing Florist Boxes Packaging Rooms Walk-in Coolers Beverage Boxes CENTURY PRODUCT CHILLERS Unit Configuration

More information

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS INDEECO Circulation Heaters are designed to provide years of trouble free operation if properly installed and maintained. Please read and follow these instructions for installing and maintaining the heater.

More information

Call us today! (800)

Call us today! (800) 150 TON AIR-COOLED CHILLER PA-ACCTR-150 Call us today! (800)341-4297 The 150-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,

More information

TECHNICAL GUIDE MODELS: H5CE090, H3CE120 & H1CE /2, 10, & 12-1/2 NOMINAL TONS EER DESCRIPTION

TECHNICAL GUIDE MODELS: H5CE090, H3CE120 & H1CE /2, 10, & 12-1/2 NOMINAL TONS EER DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS SUNLINE 2000ô MODELS: H5CE090, H3CE120 & H1CE150 7-1/2, 10, & 12-1/2 NOMINAL TONS 9.0-9.5 EER DESCRIPTION These Sunline 2000ô units are completely

More information

SECTION AIR DOORS

SECTION AIR DOORS SECTION 23 34 33 AIR DOORS Berner Series VSA air doors are designed for openings up to 12 ft for environmental separation and up to 10 ft for insect control. Berner Series VSB air doors are designed for

More information

Custom Duct Heaters. Special Applications

Custom Duct Heaters. Special Applications Special Applications Air Conditioning & Air Handling Units For more than 50 years, INDEECO has been supplying special heaters for use in air handling and air conditioning equipment (Figure 50). A wide

More information

SECTION (15767) - UNIT HEATERS

SECTION (15767) - UNIT HEATERS SECTION 23 82 39 (15767) - UNIT HEATERS PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Unit Heaters. 2. Cabinet Unit Heaters. 3. Duct Heaters. 4. Baseboard Heaters. B. Related Sections: 1. Section

More information

HVAC. Air Blowers Fans Forced Air Heaters Heating Cables & Insulation Infrared & Radiant Heaters

HVAC. Air Blowers Fans Forced Air Heaters Heating Cables & Insulation Infrared & Radiant Heaters Air Blowers.................................352 Fans................................... 353-354 Forced Air Heaters........................... 354 Heating Cables & Insulation....................355 Infrared

More information

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM SECTION 23 81 06 - PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. This Section includes equipment types that contain all the components of the refrigeration process within

More information

30GT FLOTRONIC AIR-COOLED CHILLERS

30GT FLOTRONIC AIR-COOLED CHILLERS 30GT-41SB 30GT040-110 FLOTRONIC AIR-COOLED CHILLERS PERFORMANCE DATA FIELD WIRING DIAGRAM 1998 Carrier Corporation Syracuse, New York 13221 Form 30GT-41SB Supersedes 30GT-21SB, 30GT-22SB, 30GT-23SB, Printed

More information

Explosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1

Explosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics

More information

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 870 SERIES INDUSTRIAL CONTROL PANELS

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 870 SERIES INDUSTRIAL CONTROL PANELS INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 870 SERIES INDUSTRIAL CONTROL PANELS GENERAL INDEECO Industrial Control Panels are designed to provide years of trouble free operation if properly

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PSA4BI Series M1200 Product Line R-410A Ultra High Efficiency Air Conditioner 24.5 SEER 2-3-4 Ton 2 M1200 12 YEAR ALL PARTS LIMITED WARRANTY M1200 WITH UPGRADED WARRANTY

More information

C. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1.

C. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1. SECTION 236426 - ROTARY-SCREW WATER CHILLERS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes packaged, water cooled or air cooled as scheduled, electric-motor-driven, rotary-screw water chillers

More information

Electric Unit Heaters for Standard and Hazardous (Classified) Locations

Electric Unit Heaters for Standard and Hazardous (Classified) Locations 2-6.4 August, 09 Electric Unit eaters for tandard and azardous (Classified) Locations MODEL ER MODEL VE MODEL PTE MODEL EX table of contents Table of Contents Page Electric Unit eater Design Benefits Introduction...3

More information

JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: REFERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED BY: DATE:

JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: REFERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED BY: DATE: T2HA, T3HA, and T4HA with CAHB Systems Limited Range Multi-Zone Heat Pumps Rev. 1.1 [07/07] JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: ERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED

More information

PACKAGE AIR CONDITIONER

PACKAGE AIR CONDITIONER PACKAGE AIR CONDITIONER FORM NO. ATZ-206 TZAA- HIGH EFFICIENCY SERIES NOMINAL SIZE 10 TON [35.2 kw] 10 TON MODEL [35.2 kw] This product is shipped with a nitrogen holding charge that must be vented prior

More information

MHCCW Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH

MHCCW Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH MHCCW-10-05 Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled Water Fan Coil with Electric Heat 2-Pipe Nominal Size:

More information

HD3D Forced-Air Heater

HD3D Forced-Air Heater Installation, Operation and Maintenance Instructions HD3D Forced-Air Heater Corrosion Resistant/Hose Down PF200-8 6-30552-00 July 207 Table of Contents Section Page. Warnings... 3 2. Optional Equipment...

More information

COLD WEATHER SOLUTIONS: ELECTRIC HEAT AND CONTROL PRODUCTS

COLD WEATHER SOLUTIONS: ELECTRIC HEAT AND CONTROL PRODUCTS COLD WEATHER SOLUTIONS: ELECTRIC HEAT AND CONTROL PRODUCTS INDUSTRIAL AIR AND INFRARED RADIANT HEATERS Portable Unit Heaters Portable electric heaters are available in radiant-heat or fan-forcedair designs.

More information

SECTION PACKAGED COMPRESSOR AND CONDENSER UNITS

SECTION PACKAGED COMPRESSOR AND CONDENSER UNITS SECTION 236200 - PACKAGED COMPRESSOR AND CONDENSER UNITS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions apply

More information

Tubular Industrial Process

Tubular Industrial Process Application Tempco Over-the-Side Immersion Heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round

More information

MHCCW Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH

MHCCW Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH MHCCW-06-00 Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled or Hot Water Fan Coil 2-Pipe Nominal Size: 18,000 BTUH

More information

Why settle for anything less?

Why settle for anything less? PSC PRESSURE SYSTEMS COMPANY INC./aka PSC CLEANING SYSTEMS INC. EXPLOSION-PROOF HOT WATER HIGH PRESSURE CLEANING SYSTEMS For Class I, Group C&D hazardous locations or Class II, Group F&G hazardous locations

More information

30GN FLOTRONIC II AIR-COOLED CHILLERS

30GN FLOTRONIC II AIR-COOLED CHILLERS 30GN-19SB 30GN040-110 FLOTRONIC II AIR-COOLED CHILLERS PERFORMANCE DATA FIELD WIRING DIAGRAM 1998 Carrier Corporation Syracuse, New York 13221 Form 30GN-19SB Supersedes 30GN-6SB, 30GN-7SB, 30GN-8SB, Printed

More information

EMI ENGINEERING SUBMITTAL

EMI ENGINEERING SUBMITTAL (MH4) MULTI-ZONE HEAT PUMP AIR CONDITIONING SYSTEM Rev. 1.4 [3/05] JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: REFERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED BY: DATE: UNIT DESIGNATION:

More information

TECHNICAL GUIDE. Description SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS YD360, 480 & THRU 50 NOMINAL TONS YTG-B-0811

TECHNICAL GUIDE. Description SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS YD360, 480 & THRU 50 NOMINAL TONS YTG-B-0811 Description These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of Refrigerant R-410A for storage

More information

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product

More information

FE2 Series. Installation, Operation, & Maintenance Instructions. Electric Forced Air Heaters for Hazardous Locations. Model Coding

FE2 Series. Installation, Operation, & Maintenance Instructions. Electric Forced Air Heaters for Hazardous Locations. Model Coding WARNING! Read all important information notices. Electric Forced Air Heaters for Hazardous Locations FE2 Series Installation, Operation, & Maintenance Instructions Model Coding FE2 220 1 50 025 W T Model

More information

1025, BOUL. MARCEL-LAURIN INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER. Prepared par Claude Gadoury, P. Eng MTL TECHNOLOGIES INC.

1025, BOUL. MARCEL-LAURIN INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER. Prepared par Claude Gadoury, P. Eng MTL TECHNOLOGIES INC. WYETH-AYERST CANADA INC. 1025, BOUL. MARCEL-LAURIN S T - L A U R E N T, Q U É B E C INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER MODEL P448800LT--55WC--22C66S Prepared par Claude Gadoury, P.

More information

SECTION COOLING TOWERS

SECTION COOLING TOWERS SECTION 23 65 00 COOLING TOWERS PART 1 - GENERAL 1.1 DESCRIPTION A. Packaged, induced draft open circuit cooling tower complete with fill, fan, inlet louvers and associated accessories and equipment. 1.2

More information

ELECTRIC UNIT HEATER REGULAR DUTY

ELECTRIC UNIT HEATER REGULAR DUTY ELECTRIC UNIT HEATER REGULAR DUTY Installation Form RGM 428 (MI500 Revision 0) APPLIES TO: Model EGE INDEX (by page number) Clearance to Combustibles... 3 Dimensions... 4 Electrical... 4 Fan Motor... 4

More information

STEAM/HOT WATER UNIT HEATERS

STEAM/HOT WATER UNIT HEATERS STEAM/HOT WATER UNIT HEATERS MODEL HSB/HC MODEL V/VN MODEL PT/PTN MODEL GLW FEBRUARY, 2015 Table of Contents Table of Contents Page I. Design Benefits A. Application, Design, Construction Overview...3

More information

ELECTRIC UNIT HEATERS FOR STANDARD AND HAZARDOUS (CLASSIFIED) LOCATIONS

ELECTRIC UNIT HEATERS FOR STANDARD AND HAZARDOUS (CLASSIFIED) LOCATIONS ELECTRIC UNIT EATER FOR TANDARD AND AZARDOU (CLAIFIED) LOCATION MODEL ER MODEL VE MODEL PTE MODEL EX 2-6.6 FEBRUARY, 17 TABLE OF CONTENT Table of Contents Page Electric Unit eater Design Benefits Introduction...3

More information

Explosion-proof Duct Heaters

Explosion-proof Duct Heaters Safety INDEECO explosion-proof ULTRA-SAFE and EP2 duct heaters are Factory Mutual (FM) and CSA Approved. The ULTRA-SAFE duct heater has the only standard product offering and features the industry s lowest

More information

Direct Gas-Fired Make-Up Air

Direct Gas-Fired Make-Up Air Direct Gas-Fired Make-Up Air Model TSU Heavy Duty, High Airflow Applications Manufacturing and Industrial Facilities Up to 64,000 cfm August 2012 Products Model TSU Direct Gas-Fired Make-Up Air Unit The

More information

SECTION AIR COOLED WATER CHILLERS

SECTION AIR COOLED WATER CHILLERS PART 1 GENERAL 1.1 SECTION INCLUDES A. Chiller package B. Charge of refrigerant and oil C. Controls and control connections D. Chilled water connections E. Starters F. Electrical power connections 1.2

More information

Coil-In-Tank Design: Refrigeration System: Cabinet Construction:

Coil-In-Tank Design: Refrigeration System: Cabinet Construction: Rite-Temp Manufacturing pioneered the development of refrigerated industrial water chillers in 1948. Since the first Rite-Temp units were introduced, quality engineering and manufacturing has been a key

More information

Horizontal and Vertical DIRECT DRIVE BLOWER COIL UNITS. Rating and selection at

Horizontal and Vertical DIRECT DRIVE BLOWER COIL UNITS. Rating and selection at Horizontal and Vertical DIRECT DRIVE BER COIL UNITS Rating and selection at www.enviro-tec.com CDH/CDV TABLE OF CONTENTS Construction Features...3 Fan Assembly...4 Optional Construction...5 Electric Heat...6

More information

Call us today! (800)

Call us today! (800) PA-ACCTR-200 Call us today! (800)341-4297 The 200-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable, efficient and quiet chiller

More information

HHP2 Hydronic High Performance Heater CRN: 0H14856.2C Owner s Manual, Part No. HHP2-OM-D This manual covers installation, maintenance, repair, and replacement parts. Industrial Grade Heat-Exchanger Unit

More information