ultrasonic stain cleaner
|
|
- Lauren Ray
- 5 years ago
- Views:
Transcription
1 ultrasonic stain cleaner Model Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein Mission Oaks Blvd., Camarillo, CA Visit our website at: To prevent serious injury, read and understand all warnings and instructions before use. Copyright 2007 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call
2 Power Source Specifications (4) 5V, AA, Alkaline batteries (included) Dimensions 7-1/2 L x 2-3/16 W x 2-1/16 Weight.5 lb Advanced electronic device to help remove stains on any fabric by molecular vibration Save This Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Keep children away while operating the Ultrasonic Stain Cleaner. Keep children out of the work area. Stay alert. Do not operate the Ultrasonic Stain Cleaner while tired or under the influence of drugs, alcohol, or medication. Do not overload the Ultrasonic Stain Cleaner. Use the correct tool for your application. Do not use it for applications other than intended. Maintain the Ultrasonic Stain Cleaner with care. Do not use a damaged Ultrasonic Cleaner. Tag a damaged Ultrasonic Cleaner Do not use until repaired. Ultrasonic Stain Cleaner service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. Page 2
3 Use eye and ear protection. Always wear ANSI approved impact safety goggles and work gloves. Maintain tools with care. Make certain that the Ultrasonic Stain Cleaner has fresh batteries. Inspect the Ultrasonic Stain Cleaner periodically and, if damaged, have it repaired. Do not use the Ultrasonic Stain Cleaner: a. b. c. d. If the batteries are low Near any explosive gasses or fumes If any abnormal operation is detected (if in doubt about the condition of the Ultrasonic Cleaner have it serviced) If the Battery Cover is open Do not use the unit to clean a conductor or semiconductor which is grounded. Do not run the Ultrasonic Stain Cleaner for longer than five minutes to avoid overheating the unit. Do not bump or shock the Ultrasonic Stain Cleaner when applying it to any workpiece. Rough treatment may damage the highly sensitive mechanism. Do not use on any items that say Dry cleaning only. Harbor Freight Tools is not responsible for any damage to the fabrics being cleaned as a result of using this product. After activating the Ultrasonic Stain Cleaner, do not let anyone touch the Transducer (9). Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Assembly Instructions Your Ultrasonic Cleaner comes completely assembled. Instructions on replacing the batteries are outlined on the following pages. Page 3
4 Replacing the Batteries Figure 1 Main Body (1) Back Cover (3) Battery Cover (5) Unscrew and remove the Back Cover (3) from the Main Body (1). Fold up the Battery Cover (5) and remove the used batteries-see Figure Insert the new batteries according to the polarity markings in the battery compartment. Fold down the Battery Cover (5). Thread the Back Cover (3) back onto the Main Body (1). operation 5. Before using the Ultrasonic Stain Cleaner, read and adhere to Step 9 on Page WARNING! Do not press the Ultrasonic Cleaner s ON button while making any adjustments to it. Pour a small amount (about 1 cm high) of liquid (water or a mild soap) into a small bowl or container (not included). Using mild soap will improve the cleaning effect. Place the portion of the garment or item to be cleaned into the liquid. Make certain that the item to be cleaned will not be damaged by exposing or submerging it in liquid. Make certain that the object being submerged does not have electrical components as this could result in damage and injury. Press and hold down the ON button (6) until the LED light indicates the Ultrasonic Cleaner is activated. Continue to hold down the ON button while operating the Ultrasonic Cleaner Keep the portion of the garment to be cleaned under the liquid surface, and place the Transducer (9) (located at the front of the Ultrasonic Cleaner) into the liquid and move it close to the part of the fabric to be cleaned. Do not actually touch the item with the Ultrasonic Stain Cleaner. Move it back and forth over the portion of the item that needs cleaning until it is clean. When you are finished, release the ON button (6) to turn off the Ultrasonic Stain Cleaner. Page 4
5 inspection, maintenance and cleaning Make sure the Ultrasonic Cleaner s ON button is not pressed and the batteries are removed before performing any inspection, maintenance or cleaning procedures. Before each use, inspect the general condition of the Ultrasonic Cleaner. Check for cracks or other damage. If abnormal noise or vibration occurs have the problem corrected before further use. For objects that may be difficult to clean, immerse them in water before cleaning. Do not use damaged equipment. Use only a clean cloth and mild detergent to clean the body of the Ultrasonic Cleaner. Do not use abrasives or solvents. Storage: When storing, remove batteries if the Ultrasonic Cleaner will not be used for a long period of time. parts list Part Description Q ty 1 Main Body 1 2 Front Cover 1 3 Back Cover 1 4 PCB Support 1 5 Battery Cover 1 6 ON Button 1 7 Rear Waterproofing Gasket 1 Part Description Q ty 8 Front Waterproofing Gasket 1 9 Transducer 1 10 PCB 1 11 Battery 4 12 Panel 1 13 Pin 1 14 LED light 1 Page 5
6 14 DIAGRAM Page 6
WALLPAPER STEAMER. Model ASSEMBLY AND OPERATING INSTRUCTIONS
WALLPAPER STEAMER Model 91098 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools.
More informationMEAT MIXER 4.2 GALLON
MEAT MIXER 4.2 GALLON Model 92390 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND
More informationHOT HOUSE MINI GREENHOUSE 94241
HOT HOUSE MINI GREENHOUSE 94241 ASSEMBLY & OPERATING INSTRUCTIONS Use only with GFCI electrical outlet Due to continuing improvement, actual product may differ slightly from product described herein. 3491
More information150 WATT PORTABLE CLAMP LIGHT 35149
150 WATT PORTABLE CLAMP LIGHT 35149 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2006 by Harbor Freight Tools. All
More informationHAMBURGER PRESS. Model ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011
HAMBURGER PRESS Model 44934 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More information3-1/2 Gallon Parts Washer
3-1/2 Gallon Parts Washer Model 38347 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual
More informationportable mini photo studio 65797
portable mini photo studio 65797 Cleaning, Assembly, And Operation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationWET-DRY VACUUM CLEANER 4 GALLON CAPACITY
WET-DRY VACUUM CLEANER 4 GALLON CAPACITY Model 91019 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight
More information3.5 GALLON PARTS WASHER
3.5 GALLON PARTS WASHER Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 1997 by Harbor Freight Tools. All rights
More information20 GALLON PARTS WASHER
20 GALLON PARTS WASHER 94702 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More information20 High velocity Air
20 High velocity Air Circulator 66878 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationLeaf Blower Vac 91010
3 N 1 Leaf Blower Vac 91010 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationFour Post Boot & Glove Dryer
Four Post Boot & Glove Dryer 67326 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information40 GALLON PARTS WASHER
40 GALLON PARTS WASHER 94994 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationportable heater FAN Set up and Operating Instructions
portable heater FAN 67121 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationCeramic heater FAN. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011
Ceramic heater FAN 67118 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationElectric Hand Mortar Mixer
Electric Hand Mortar Mixer 9384 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo,
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationVACUUM PUMP 2-STAGE - 9 CFM
VACUUM PUMP 2-STAGE - 9 CFM 66467 Set up and Operating Instructions WARNING To prevent explosion, serious injury, and death: Service of air conditioning systems must be done only by trained and experienced
More informationELECTRIC FIREPLACE HEATER WITH SINGLE GLASS DOOR
ELECTRIC FIREPLACE HEATER WITH SINGLE GLASS DOOR Model 91797 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure
More informationPropane lantern with piezo ignition
Propane lantern with piezo ignition 65600 Set up and Operating Instructions For Your Safety If you smell gas: 1. Do not attempt to light appliance. 2. Extinguish any open flame. 3. Disconnect from fuel
More informationBG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions
BG8SS 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationIMpORTANT SAFETy INSTRUcTIONS
Table of contents SAFETy SETUp OpERATION MAINTENANcE Safety... 2 Specifications... 4 Setup... 4 Operation... 6 WARNING SyMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...
More informationIMpORTANT SAFETy INSTRUcTIONS
Table of contents SAFETy SETUp OpERATION MAINTENANcE Safety... 2 Specifications... 4 Setup... 4 Operating Instructions... 6 WARNING SyMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 11
More informationSpecifications Component Size Weight Capacity Top Shelf 26-1/2 W x 18 L 305 lb Drawer A (x3) 22-1/2 W x 16 L x 2 D 75 lb each Drawer B (x2) 22-1/2 W x 16 L x 3-1/8 D 90 lb each Drawer C 22-1/2 W x 16 L
More information20-GALLON MOBILE PARTS WASHER OWNER S MANUAL
20-GALLON MOBILE PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Belt Sander DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Belt Sander 990 99 00336 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 990 99 Belt size 76 mm x
More informationAccessories. Safety Warnings. Table of Contents
Table of Contents Accessories...1 Safety Warnings...1 Work Area...2 Electrical Safety...2 Personal Safety...2 Power Tool Use and Care...3 Service...3 Hammer Safety Warnings...3 Usage...4 Changing Tools...4
More informationPORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
More informationMechanical Crimping Tool JT-150 Instruction Manual
500.630 Mechanical Crimping Tool JT-150 Instruction Manual Due to continuing improvements, actual product may differ slightly from the product described herein. General Safety Rules To work in safe conditions
More informationInstruction Manual Hydraulic Crimping Tool
Instruction Manual Hydraulic Crimping Tool 902-480 Due to continuing improvements, actual product may differ slightly from the product described herein. Read this material before using this product. Failure
More information3.5-GALLON PARTS WASHER OWNER S MANUAL
3.5-GALLON PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationEnglish BT3600
www.blackanddecker.com 3 English BT3600 FIG. 1 FIG. 2 150mm BENCH GRINDER BT3600 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric
More informationManual. Belt Sander BSL 115/E. ProxxonTools.com
ProxxonTools.com Belt Sander BSL 115/E Manual 3080767 Conforms to ANSI/UL 60745-1 ANSI/UL 60745-2-4 Certified to CAN/CSA-C22.2 No. 60745-1-04 CAN/CSA-C22.2 No. 60745-2-4-04 Fig. 1 Fig. 2 Fig. 3 Fig. 4
More informationBG6UL. 6 Inch Bench Grinder Assembly & Operating Instructions
BG6UL 6 Inch Bench Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information
More informationFood Slicer Visit our website at:
Electric Food Slicer 42787 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
More informationPS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
PS07214 4 1/2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationPORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
More informationATD /8 Electric Drill
ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck
More informationMini-Rooter Operating Instructions
Mini-Rooter Operating Instructions For 1-1/4 through 4 lines (30mm 100mm) Your Mini-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
More informationMicro-Rooter Operating Instructions
Micro-Rooter Operating Instructions For 1-1/4 through 3 lines (30mm 100mm) Your Micro-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
More information3-1/2 GALLON PARTS WASHER OPERATING INSTRUCTION AND PARTS MANUAL. Model # 4KTV9
3-1/2 GALLON PARTS WASHER OPERATING INSTRUCTION AND PARTS MANUAL Model # 4KTV9 QUALITY GUARANTEE: Should a Westward product fail to perform satisfactorily due to defect or poor workmanship within one
More informationCable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4" to 3" lines up to 25'
Cable Drum Machine Operation Manual 110ES SERIES Cleans 1 1/4" to 3" lines up to 25' Used For: Sinks, Showers &Tub Drains WARNING - Read All Instructions, When Using Electric Tools, Basic Safety Precautions
More informationD O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5020 BO5021 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Random Orbit Sander BO500 BO50 00377 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO500 BO50 Pad
More informationGENERAL POWER TOOL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save
More information16 Stand Fan with Remote Control Model No: FS3-40R-30
16 Stand Fan with Remote Control Model No: FS3-40R-30 FEATURES Remote Control 3 Speed Settings 4 Hour Auto-off Timer Oscillation LED Display Panel Adjustable Height Adjustable Tilt Head Whisper Quiet Operation
More informationSEWING MACHINE 45 / 21 STITCH
SEWING MACHINE 45 / 21 STITCH 90715 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright 2003 by Harbor Freight
More information36" Drum Plug Aerator OWNER S MANUAL
36" Drum Plug Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information3-3/8 INCH BLADE TOE KICK SAW
3-3/8 INCH BLADE TOE KICK SAW 94626 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationMEGRIND55. Electric Meat Grinder Assembly & Operating Instructions
MEGRIND55 Electric Meat Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationGT110
2 3 4 1 5 6 7 www.blackanddecker.com.au www.blackanddecker.co.nz GT110 4 8 A C1 2 9 B C2 Intended use Your Black & Decker hedge trimmer has been designed for trimming hedges, shrubs and brambles. This
More informationElectric Blower Watt OZBL1800WA. To view the full range visit: Operation Manual 2 Year Replacement Warranty
Electric Blower 1800 Watt Operation Manual 2 Year Replacement Warranty OZBL1800WA 0212 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZBL1800WA Motor: Input: No load speed:
More informationHigh-Velocity Floor Fan
High-Velocity Floor Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationRead this material before using this product. Failure to do so can result in serious injury.
Electric Drain Cleaner 66506 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Electric Air Pump. 3 x Inflation Adaptors
WHAT S IN THE BOX ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 220-240V ~50Hz Power: 130W Max. Current: 0.62A Max. Pressure: 0.6PSI Flow Rate: 440L/Min Inflation Time: Under 2min (double
More informationEnglish... 5 Čeština Slovenčina Magyarul Polski Русский... 85
FDS 10150-A 2 English... 5 Čeština... 21 Slovenčina... 37 Magyarul... 53 Polski... 69 Русский... 85 1 FDS 10150-A 4 FDS 10150-A Contents 5 EN Screwdriver INSTRUCTION MANUAL Thank you for your purchase
More informationSuper-Vee Operating Instructions
Super-Vee Operating Instructions For 1-1/4 through 3 lines (30mm 100mm) Pour français voir la page 7 Para ver el español vea la paginá 15 Your Super-Vee is designed to give you years of trouble-free, profitable
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL Random orbit sander WX655 2 3 1 9 4 5 8 6 7 A1 A2 10B 10A B C1 C2 D 11 E F E F G H1 H2 H3 H4 H4 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all
More informationPWASH Gallon Parts Washer Assembly & Operating Instructions
PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important
More informationITEM # MEG300. Electric Meat Grinder Assembly & Operating Instructions
ITEM # MEG300 Electric Meat Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationMEG51. 5-in-1 Grinder And Strainer Assembly & Operating Instructions
MEG51 5-in-1 Grinder And Strainer Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More information1 HP Air Mover. Owner s Manual
1 HP Air Mover Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationWHEATGRASS JUICER C O M M E R C I A L. INSTRUCTION MANUAL Model No
COMMERCIAL PRODUCTS ATTENTION If any components of this unit are broken, do not operate properly, or for product returns, please contact Pragotrade at 1-800-814-4895 Outside the U.S. call 440-638-3131.
More informationDrywall Screwdriver INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 68 00603 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE
More informationSAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT
SAFETY AND OPERATING MANUAL 450W/46cm HEDGE TRIMMER JM450PHT GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
More informationCable Drum Machine Operational Manual CP1020
TOOLS FOR THE PROFESSIONAL PLUMBER TOOLS FOR THE PROFESSIONAL PLUMBER Cable Drum Machine Operational Manual CP1020 Used For: Sinks, Showers and Tub Drains Cleans 3/4" to 3" lines up to 25' (Not for roots)
More information4-GALLON MOBILE PARTS WASHER
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More information18 INCHES, OSCILLATING STAND FAN
To Buy: Contact Sylvane at 800-934-9194 or visit www.sylvane.com For Product Support: Contact Soleus Air at (888) 876-5387 18 INCHES, OSCILLATING STAND FAN OWNER S MANUAL Model # FSM-45 PLEASE READ AND
More informationRSH2455G OPERATOR S MANUAL ELECTRIC QUIET CHIPPER SHREDDER
RSH2455G ELECTRIC QUIET CHIPPER SHREDDER OPERATOR S MANUAL Important! It is essential that you read the instructions in this manual before mounting and operating this machine. Subject to technical modifications.
More information60In. Ceiling Fan. Owner s Manual
60In. Ceiling Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information22In. Oscillating Pedestal Fan. Owner s Manual
22In. Oscillating Pedestal Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationSpecifications. Dimensions 32" x 10" x 15" Cage Wire Thickness 3 / 16 " Page 2 For technical questions, please call
Specifications Dimensions 32" x 10" x 15" Cage Wire Thickness 3 / 16 " Page 2 For technical questions, please call 1-888-866-5797. Item 9646 IMPORTANT SAFETY INFORMATION 1. Use only where inaccessible
More information42 Oscillating Tower Fan with Remote Control. OWNER S MANUAL Model # FC1-42R-03
42 Oscillating Tower Fan with Remote Control OWNER S MANUAL Model # FC1-42R-03 3149097 PLEASE READ AND SAVE THESE INSTRUCTIONS 42 IN. OSCILLATING TOWER FAN W/ REMOTE CONTROL Thank you for choosing a Soleus
More informationORIGINAL INSTRUCTIONS. Lawn Mower RLM3640L RLM3600L
ORIGINAL INSTRUCTIONS Lawn Mower RLM640L RLM600L Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL
More informationUser Manual Drywall Sander Model: BNR7231A
User Manual Drywall Sander Model: BNR7231A - Page 1- 1. PRODUCT DESCRIPTION The machine is designed for grinding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues,
More informationDIRTY WATER SUBMERSIBLE PUMP
WHAT S IN THE BOX DIRTY WATER SUBMERSIBLE PUMP 780W INSTRUCTION MANUAL SPECIFICATIONS Motor: 780W Max. Flow Rate: 15,700l/h Max. Head 8m Max. Immersion: 7m Min. Suction Depth 50mm Max Particle Size: Ø35mm
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5040 BO5041 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Random Orbit Sander BO5040 BO504 0074 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO5040 BO504
More informationStore Name: Location: Date Purchased: Serial Number (located on back of unit):
Oscillating Reflective Heater Operating Instructions Model Number: HE08-R9-21 3077997 V140703 Thank you for choosing a Soleus Air heater. This owner s manual will provide you with valuable information
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Power Mixer UT04 0078 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model UT04 No load speed (min - )
More informationDrywall Screwdriver R INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 6823 6824 6825 6825R 002604 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS
More informationUNIPRISE INTERNATIONAL INC. UNIPRISE UES200 D PIPE THAWING MACHINE Operator s Manual and Technical description
UNIPRISE INTERNATIONAL INC. UNIPRISE UES200 D PIPE THAWING MACHINE Operator s Manual and Technical description - 2013-1 IMPORTANT For your own safety, before assembling and operating this unit, read this
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationELECTRIC DRILL INSTRUCTIONS. Item #21285
ELECTRIC DRILL INSTRUCTIONS Item #21285 The EASTWOOD ELECTRIC DRILL is great for use on virtually all metals including steel, aluminum, brass and more. The powerful 6.3 Amp motor and 1/2 capacity chuck
More informationProduct Code: Cordless Patio Weed Sweeper INSTRUCTION MANUAL. Please retain for reference.
Product Code: 2036884 Cordless Patio Weed Sweeper INSTRUCTION MANUAL Please retain for reference. 1 Table of Contents: Safety Instructions 2 Product Description 3 Safety Symbols 3 Warnings 4-5 Parts breakdown
More informationInstructions for Use. Electric Pole Hedge Trimmer Input Power Tooth gap of cutter blade 16mm
Voltage/Frequency 230V-240V a.c./ 50Hz Input Power 450W Tooth gap of cutter blade 16mm Strokes 1,600/min Noise emission value LWA 100 db(a) Hand / arm vibration a vhw < 2.5 m /s2 Total Length 1.9m-2.5m
More informationEasy Rooter. Operating Instructions
Easy Rooter Operating Instructions For 3" through 10" lines (75mm 250mm) Your Easy Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
More informationELECTRIC BODY SAW INSTRUCTIONS. Item #31660
ELECTRIC BODY SAW INSTRUCTIONS Item #31660 The EASTWOOD ELECTRIC BODY SAW is great for use on virtually all metals including steel, aluminum, brass and more. Cuts wood, fiberglass and other materials with
More informationCATALINA FIRE TABLE ASSEMBLY INSTRUCTIONS
CATALINA FIRE TABLE ASSEMBLY INSTRUCTIONS CSA Model 98300 DRF01000 Installer: Leave these instructions with consumer. Consumer: Keep these instructions for future reference. DANGER If you smell gas: 1.
More informationCORDLESS HAND VACUUM INSTRUCTION MANUAL
WHAT S IN THE BOX Cordless Vacuum CORDLESS HAND VACUUM INSTRUCTION MANUAL Brush Tool SPECIFICATIONS Input: Air Flow: Dust Canister Capacity: Weight: ozito.com.au 18V 8 L/sec 540ml 0.85kg Crevice Tool Mounting
More informationTE 300-AVR. English Français Español Português
TE 300-AVR English Français Español Português en fr es pt 1 2 3 4 5 6 7 8 9 TE 300-AVR en Original operating instructions....................................... 1 fr Mode d'emploi original............................................
More informationMS-11 Flat Panel Reflective Heater Operating Instructions. Model No. MS Soleus Air International
MS-11 Flat Panel Reflective Heater Operating Instructions 3077997 Model No. MS-11 2007 Soleus Air International Thank you for choosing a Soleus Air personal heater. This owner s manual will provide you
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information10 Table/Wall Mount Fan Model No: FTY-25 Operating Instructions FTY Soleus Air International
10 Table/Wall Mount Fan Model No: FTY-25 Operating Instructions 3077997 FTY-25 2010 Soleus Air International Thank you for choosing a Soleus Air Table Fan. This owner s manual will provide you with valuable
More informationCD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand
www.blackanddecker.com.au CD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand CD400A-XE 1 4 3 1 2 KA196-XE/KA196E-XE 5 1 KA273-XE 4 3 2 A 3 2 4 2 B 3 4 4 3 3 4 C D 4 3 E 2 6 7 8 5 G F 10 11 9 CD400A-XE
More informationDUST EXTRACTOR MODEL No: CDE1000
DUST EXTRACTOR MODEL No: CDE000 Part No:64765 OPERATING & MAINTENANCE INSTRUCTIONS GC054 INTRODUCTION Thank you for purchasing this CLARKE Dust Extractor which is intended to keep work areas free from
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information