IC3 ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217)

Transcription

1 IC3 ON HALF OFF FULL START READY ON HALF OFF FULL START READY ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) A 06/ Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) or by writing to Post Office Box 3227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. Page

3 TABLE OF CONTENTS Electrical and Operating Controls Funnels Numerical Index Strainer, Flow Control, Solenoid & Lines... 8 Tank Assembly... 6 Top Cover, Hood, Trunk, Base & Panels... 4 Page 3

4 TOP COVER, HOOD, TRUNK, BASE AND PANELS IC ON HALF OFF FULL START READY SHORT MODELS P

5 ITEM PART NO. QTY. DESCRIPTION TOP COVER, HOOD, TRUNK, BASE AND PANELS Cover W/Decals, Top (Includes items 2 & 3) Screw, Truss Head #6-32 x.37" Decal, No Serviceable Parts Decal, Batch Setting Hood (Includes Item ) Screw, Pan Head #8-32 x.37" Decal, Hood - Control Panel Trunk Assy Nut, Hex Keps # Housing, Nozzle Mounting Nut, Hex Keps # Housing Assy, Trunk Extension.0" (Tall Models only) Nut, Hex Keps # Base (Tall Models) Base (Short Models) Guide, Server(Tall Models) Screw, Pan Head - Locking #8-32 x.37" Guide, Server (Short Models) Nut, Hex Keps # Foot,.7" O.D. x.44 (See item 18) Cover, Trunk Extension (Tall Models only) Screw, Truss Head #8-32 x.37" Fastener, J-Type # Panel W/Decals, Access (Includes items 2, 14, 1 & 16) Screw, Truss Head #8-32 x.37" Fastener, J-Type # Schematic, Electrical Decal, WARNING Electrical Decal, Comply to Plubing Code Plug, Hole, BLK.7" dia Kit, Foot (Includes 4 of item 11) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

6 TANK ASSEMBLY IC P

7 ITEM PART NO. QTY. DESCRIPTION Tank Heater Kit, 120/208V (Includes item 2) Tank Heater Kit, 120/240V (Includes item 2) Nut, Hex # Gasket, Tank Heater Limit Thermostat Nut, Keps # Tank Lid Nut, Hex # Gasket, Tank Lid Tank Screw, Pan Head #8-32 x.37" Tube, Sprayhead Nut, Hex # Gasket, Sprayhead Tube Nut, Hex.438" Sprayhead Tube Assy, Vent (Includes item 12) Nut/Sleeve Compression.37" Tube, Fill TANK ASSEMBLY * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 7

8 STRAINER, FLOW CONTROL, SOLENOID & LINES IC SOLENOID VALVE REPAIR PARTS P

9 ITEM PART NO. QTY. DESCRIPTION Tube Assy, Flow Control to Tank Elbow,.2" Barb x.12" MPT Clamp, Hose.47"/.4" ID Nozzle, Dilution Screw, Truss Head, BLK #6-32 x.37" Flow Control Assy (Includes items 6 thru 9) Fitting, Outlet Gasket Flow/Washer Gasket Kit (.330 GPM)(Includes item 7) Body (Not available. Order item ) Elbow,.12" NPT Male/Female Tee, Union.12" FPT Nipple,.12" NPT Gasket,.2" Flare Copper Union,.2" Flare Valve, Needle.2" flare Adapter,.2" x.12" MPT Elbow,.12" NPT Female Fitting,.2" Barb x.12" MPT Plate, Mouting Nut, Keps # Fitting, Bulkhead Lockwasher, Internal Tooth.37" Nut, Hex Tube Assy Strainer Assy (Includes items 23 thru 2) Fitting Inlet Screen Body (Not available. Order item 22) Tube Assy STRAINER, FLOW CONTROL, SOLENOID & LINES Elbow, Male.2" Flare x.12" MPT Valve Assy, Solenoid 120V Screw, Pan Head #10-32 x.37" Lockwasher, Split #10 (continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 9

10 STRAINER, FLOW CONTROL, SOLENOID & LINES IC SOLENOID VALVE REPAIR PARTS P

11 STRAINER, FLOW CONTROL, SOLENOID & LINES ITEM PART NO. QTY. DESCRIPTION Solenoid Valve Base Kit (Includes O-ring) Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) Solenoid Valve Coil, 120V Guide Kit (Includes Washer and O-ring) Clamp, Hose.438" ID Nut, Keps # * 1 Tube, Silicone.2" ID x 28.0" (Order item 36)(Tall Models) * 1 Tube, Silicone.2" ID x 23.0" (Order item 36)(Short Models) Bushing, 1.0" Dia. Hole Tube.2" ID x 12.0" (Use as required) Tube.2" ID x 36.0" (Use as required) Tube.2" ID x 120.0" (Use as required) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 11

12 ELECTRICAL & OPERATING CONTROLS IC P

13 ITEM PART NO. QTY. DESCRIPTION Thermostat Assy, 206 F (Includes Crommet) Screw, Pan Head #6-32 x.2" Lockwasher, External Tooth # Screw, Binding Head #8-32 x.2" (Terminal) Grommet, Thermostat ELECTRICAL & OPERATING CONTROLS Timer, Digital 120V Screw, Truss Head #6-32 x.37" Screw, Pan Head #6-32 x.7" Lockwasher, External Tooth # Spacer,.171" I.D. x.37" O.D. x.37" LG Terminal Housing Lamp Assy, Green Lockwasher M Nut M Switch, START Switch, BATCH SELECT Switch, ON/OFF, Lighted Bushing,.469" I.D Clamp, Hose.438" ID Nut, Keps # Screw, Pan Head w/terminal Washer #10-32 x.0" Connector, Cable.7" NPS Terminal Block, 3 Pole Red/Whi/Blk Screw, Truss Head #8-32 x.0" Switch, Master ON/OFF Screw, Truss Head, Locking #6-32 x.2" (Mounting) Screw, Pan Head #10-32 x.38" (Terminals) Lockwasher, Ext.-tooth # Decal, Ground The following items are not illustrated Wiring Harness, Main Wiring Harness, Master ON/OFF Switch * 1 Lead, 16 Ga. BLK (Thermostat to Ready Lamp) * 1 Lead, 16 Ga. BLU/BLK (Thermostat to Ready Lamp) Terminal Housing Lead, 12 Ga. BLK (Limit to Tank Heater) Lead Assy, Timer to Batch Selector Switch Shield, Polyester - Timer Board * 1 Shield, Polyester - Switch Terminals Cord, Power * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 13

14 FUNNEL IC P

15 FUNNEL ITEM PART NO. QTY. DESCRIPTION Funnel Assembly (Includes items 2 thru 7) Bracket, Funnel * 1 Funnel (Order item 1) Decal, WARNING Remove Funnel Slowly Handle, Funnel (Includes Item 6) Screw, Round Head.2"-20 x 1.0" Decal, WARNING Hot Liquid * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 1

16 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , ,9,11, , ,