The Future of PMRs: Towards a European PMR Network

Size: px
Start display at page:

Download "The Future of PMRs: Towards a European PMR Network"

Transcription

1 The Future of PMRs: Towards a European PMR Network 21 Costas KADIS 1, Costas A. THANOS 2 and Emilio LAGUNA 3 1 Frederick University, 7, Y. Frederickou str., Pallouriotissa, 1036 Nicosia, Cyprus 2 Department of Botany, Faculty of Biology, National and Kapodistrian University of Athens, Panepistimiopolis, Athens 15784, Greece 3 Generalitat Valenciana, Servicio de Vida Silvestre, c/francesc Cubells, 11. E Valencia, Spain The chapters of this book illustrate efficiently and support competently the declaration that the Plant Micro-Reserve (PMR) approach has been proven, over the last 20 years, a successful method for the conservation of endemic, rare and threatened plants, in several European countries. The European Commission has acknowledged and in fact promoted the PMR approach as a valuable tool towards plant diversity conservation in Europe (European Commission, 2007). This adoption conforms well to the guidelines of the European Strategy of Plant Conservation (Smart et al., 2002), also endorsed by the World Conservation Congress held in Amman (IUCN, 2000), in order to use the PMRs as a good practice for the in situ conservation of wild plants in Europe. Recently, the PMR concept has been proposed to additionally serve as a model for the creation of natural Botanical Gardens (Thanos, 2012). EuroGard VI Conference in its resolutions (2012) urged Botanic Gardens to stay involved with conservation actions like Plant Micro-reserves and other in situ or inter situ projects. The idea of exchanging knowledge and experiences gained from different PMR projects was discussed in two international PMR Experts Workshops, which took place in Crete (2005) and Nicosia (2011). The first PMR workshop was organised by the project CRETAPLANT, in November 24-25, 2005, at the Mediterranean Agronomic Institute of Chania (Crete, Greece). It was entitled The role of micro-reserves for plant conservation in Mediterranean Europe. The case of the pilot network of micro-reserves in Crete. Experts from 7 European countries (Greece, Cyprus, Spain, France, Italy, Slovenia, Germany) participated in the workshop (Fig. 21.1), presented PMR and plant conservation related projects in their countries and contributed considerably to an extended discussion on the establishment of the Cretan PMR network. Within the framework of the PLANT-NET CY project, an Experts Workshop on Plant Micro-Reserves was held in Nicosia, in April 2011 (Fig. 21.2). This workshop aimed at establishing close cooperation between plant conservation experts and other stakeholders involved in the PMR approach, towards the effective conservation of threatened plants in Europe. One of the main objectives of chapter Conclusions.indd /6/2013 1:14:06 πμ

2 PART CONCLUSIONS Figure 21.1 Snapshot from the Experts Workshop on PMRs, held in Chania, in November Figure 21.2 Snapshot from the Experts Workshop on PMRs, held in Nicosia, in April the workshop was to provide a networking platform for all previous or concurrent, relevant LIFE projects, with a focus on the establishment of PMRs in Europe. The workshop hosted scientists from Spain (Valencia and Menorca), Greece, Slovenia, Latvia, Bulgaria, Romania and Cyprus, who presented PMR projects or other plant conservation initiatives implemented in their respective countries. The participants shared their knowledge and experience, accumulated over the last 15 years from projects that have successfully adopted the PMR approach. Moreover, the workshop provided an opportunity for scientists from new EU member states that have not yet adopted the PMR approach, to get familiarized chapter Conclusions.indd /6/2013 1:14:06 πμ

3 CHAPTER 21 The Future of PMRs: Towards a European PMR Network 181 with this concept, thus promoting the establishment of similar networks in their countries. An important section of this workshop was the discussion on the possibility of creating a European PMR network for the conservation of European wild plants. The network could link all PMR initiatives, which have been developed in Europe, thus facilitating the systematic exchange of knowledge and experiences resulting from PMR initiatives. Setting up a network of European PMRs could involve: a. organizing regular meetings of PMR experts (e.g. every 2-3 years), b. publishing newsletters with important developments of PMR projects, c. developing a common website focusing on European PMRs, d. creating pages on social networking services webpages, e. creating a European PMR Committee consisting of representatives from each country/region, and f. establishing communication channels with the European Commission and other international organisation (e.g. IUCN) on new plant diversity conservation initiatives. Such a network could substantially contribute towards (i) exchanging knowhow and best practices between the established PMR networks, (ii) facilitating the establishment of new PMR networks in other EU countries, (iii) securing the sustainability of all LIFE and other related projects on PMRs (after their completion) and (iv) promoting the conservation of plant diversity in the European Union through a sound, tested and successful multidisciplinary approach. References EuroGard VI, Congress Conclusions. Sixth European Gardens Congress. European Botanic Gardens in a Changing World, May 28 - June 2, Chios Island, Greece. European Commission, Plant micro-reserves: from concept to implementation. In: LIFE and endangered plants: Conserving Europe s threatened flora. Office for Official Publications of the European Communities, pp Luxembourg. IUCN, Resolution Conservation of plants in Europe. Resolutions of the World Conservation Congress 2000, IUCN. Jordan: Amman. Smart, J., Imboden, Ch., Harper, M. & Radford, E. (eds.), Saving the Plants of Europe. European Plant Conservation Strategy. Planta Europa, Council of Europe & Plantlife International. United Kingdom: London. Thanos, C.A., Natural Botanic Gardens Conserving Plant Diversity In Situ. The Evolution of the Plant Micro Reserve Concept. Book of Abstracts, p. 32, EUROGARD VI Sixth European Gardens Congress. European Botanic Gardens in a Changing World, May 28 - June 2, Chios Island, Greece. chapter Conclusions.indd /6/2013 1:14:07 πμ

4

5 Costas Kadis, Costas A. Thanos & Emilio Laguna Lumbreras (eds) PLANT MICRO-RESERVES: FROM THEORY TO PRACTICE Experiences gained from EU LIFE and other related projects This book has been published within the framework of the project LIFE08 NAT/Y/000453, which was co-funded by the European Commission under the LIFE+ programme. chapter 00.indd 3 17/6/2013 7:41:30 μμ

6 PLANT MICRO-RESERVES: FROM THEORY TO PRACTICE Experiences gained from EU LIFE and other related projects Utopia Publishing, Athens 2013 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the Greek Copyright Law, 2121/1993, in its current version, and permission for use must always be obtained from Utopia. Violations are liable to prosecution under the Greek Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. ISBN: ISBN Cover and Text Designer: Ioanna Dimopoulou Project Editor: Athena Parnassas Production Coordinator: Haris Kiriakopoulos Utopia Εκδόσεις ΕΠΕ 42 Argolidos Str, Athens Tηλ.: utopiapublishing@gmail.com chapter 00.indd 4 17/6/2013 7:41:33 μμ

Eco-Landscape Design

Eco-Landscape Design Eco-Landscape Design John A. Flannery Karen M. Smith Eco-Landscape Design John A. Flannery Boston Spa Media Boston Spa, Leeds United Kingdom www.bostonspamedia.com Karen M. Smith Boston Spa Media Boston

More information

Basics, Methods and Case Studies

Basics, Methods and Case Studies Geobotany Studies Basics, Methods and Case Studies Editor Franco Pedrotti University of Camerino Camerino Italy Editorial Board S. Bartha, Vacratot, Hungary F. Bioret, University of Brest, France E.O.

More information

EUROPE STARTS WITH YOU!

EUROPE STARTS WITH YOU! EUROPE STARTS HERE! EUROPE STARTS WITH YOU! The European Heritage Label is a valuable opportunity for an heritage site, offering increased prestige and visibility. WHAT IS THE EUROPEAN HERITAGE LABEL?

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

About European Standards

About European Standards About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization

More information

Biological evaluation of medical devices

Biological evaluation of medical devices BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference

More information

L I F E I I I. LIFE and endangered plants. Conserving Europe s threatened flora

L I F E I I I. LIFE and endangered plants. Conserving Europe s threatened flora L I F E I I I LIFE and endangered plants Conserving Europe s threatened flora European Commission Environment Directorate-General LIFE ( The Financial Instrument for the Environment ) is a programme launched

More information

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités

More information

Plastic containers for intravenous injections (ISO 15747:2010)

Plastic containers for intravenous injections (ISO 15747:2010) Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques

More information

National Research Infrastructure Roadmapping in Europe

National Research Infrastructure Roadmapping in Europe www.inroad.eu info@inroad.eu @InRoadproject @InRoad_Project National Research Infrastructure Roadmapping in Europe Drivers and Trends InRoad Isabel Bolliger University of Lausanne Swiss Graduate Institute

More information

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number

More information

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version) ÖNORM EN ISO 9001 Edition: 2009-08-15 Quality management systems Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version) Qualitätsmanagementsysteme Anforderungen (ISO 9001:2008 + Cor.1:2009) (konsolidierte

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

BGCI and the European Botanic Gardens Consortium, EU wide networking and data search tools

BGCI and the European Botanic Gardens Consortium, EU wide networking and data search tools BGCI and the European Botanic Gardens Consortium, EU wide networking and data search tools Suzanne Sharrock Director of Global Programmes Botanic Gardens Conservation International Presentation overview

More information

ILNAS-EN ISO 2692:2006

ILNAS-EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische

More information

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place

More information

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et

More information

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l

More information

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance

More information

ILNAS-EN ISO :2005

ILNAS-EN ISO :2005 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference

More information

Health Technology Assessment (HTA) in Croatia

Health Technology Assessment (HTA) in Croatia Health Technology Assessment (HTA) in Croatia Mirjana Huić, MD, MSc Assistant Director Department for Development, Research and HTA Agency for Quality and Accreditation in Health Zagreb, Croatia HTA Multidisciplinary

More information

COMMISSION DECISION. of

COMMISSION DECISION. of EUROPEAN COMMISSION Brussels, 1.6.2015 C(2015) 3559 final COMMISSION DECISION of 1.6.2015 recognising DIN CERTCO Gesellschaft für Konformitätsbewertung mbh, as a monitoring organisation pursuant to Regulation

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif

More information

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing INTERNATIONAL STANDARD ISO 22777 First edition 2004-12-15 Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing Chaussures Méthodes d'essai pour

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique

More information

Integrated urban policies and land management The URBACT Experience Didier Vancutsem

Integrated urban policies and land management The URBACT Experience Didier Vancutsem Integrated urban policies and land management The URBACT Experience Didier Vancutsem Didier Vancutsem URBACT Expert Prof Urban Planner ISOCARP Contents Integrated urban policies and land management: a

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference

More information

EN ISO ÖNORM. Edition: (ISO 14937:2009)

EN ISO ÖNORM. Edition: (ISO 14937:2009) ÖNORM EN ISO 14937 Edition: 2010-03-15 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

Forum for European Electrical Domestic Safety FEEDS. B. DOME FISUEL

Forum for European Electrical Domestic Safety FEEDS. B. DOME FISUEL Forum for European Electrical Domestic Safety FEEDS B. DOME FISUEL Benoit.dome@gmail.com Twitter @FisuelEU Agenda 1. Participants 2. Objectives 3. White Paper 4. Conclusions 1.Participants Consumer Association

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 15749-4:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes Ships and marine technology - Drainage

More information

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

Energy management systems - Requirements with guidance for use (ISO 50001:2011) Irish Standard I.S. EN ISO 50001:2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law.

More information

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression

More information

ILNAS-EN ISO 10684:2004

ILNAS-EN ISO 10684:2004 Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National

More information

Keeping European Consumers safe Rapid Alert System for dangerous non-food products 2014

Keeping European Consumers safe Rapid Alert System for dangerous non-food products 2014 Keeping European Consumers safe Rapid Alert System for dangerous non-food products 2014 COMPLETE STATISTICS Justice and Consumers Directorate-General for Justice and Consumers Directorate Consumers Unit

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

CONFORMITY ASSESSMENT - SUPPLIER'S

CONFORMITY ASSESSMENT - SUPPLIER'S STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

Forum for European Electrical Domestic Safety FEEDS. Residential Electrical Safety How to ensure progress?

Forum for European Electrical Domestic Safety FEEDS. Residential Electrical Safety How to ensure progress? Forum for European Electrical Domestic Safety FEEDS Residential Electrical Safety How to ensure progress? Plan Residential Electrical Safety- how to ensure progress? 1. Why does it matter 2. Origin of

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries

More information

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration INTERNATIONAL STANDARD ISO 22612 First edition 2005-03-01 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration Vêtements de protection contre les agents

More information

Contents. EN :2012 (E) Issue 5 ( ) Page

Contents. EN :2012 (E) Issue 5 ( ) Page Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium Glass containers - Vacuum lug finishes - Part 2: 33 medium EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except

More information

ISO/TS TECHNICAL SPECIFICATION

ISO/TS TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION ISO/TS 17892-8 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test Reconnaissance et essais

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Metallic accessories Corrosion resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Metallic accessories Corrosion resistance INTERNATIONAL STANDARD ISO 22775 First edition 2004-12-01 Footwear Test methods for accessories: Metallic accessories Corrosion resistance Chaussures Méthodes d'essai pour accessoires: accessoires métalliques

More information

This document is a preview generated by EVS

This document is a preview generated by EVS CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved

More information

The European Landscape Convention Florence, 20 October 2000

The European Landscape Convention Florence, 20 October 2000 The European Landscape Convention Florence, 20 October 2000 Maguelonne DEJEANT-PONS Joseph CAREW Spatial Planning and Landscape Division Council of Europe Introduction «The landscape...... has an important

More information

INTERNATIONAL SYMPOSIUM ON

INTERNATIONAL SYMPOSIUM ON CONGRES DES POUVOIRS LOCAUX ET REGIONAUX DE L'EUROPE Chambre des Pouvoirs Locaux CONGRESS OF LOCAL AND REGIONAL AUTHORITIES OF EUROPE Chamber of Local Authorities Council of Europe/Conseil de l Europe

More information

The European Landscape Convention Florence, 20 October 2000

The European Landscape Convention Florence, 20 October 2000 The European Landscape Convention Florence, 20 October 2000 Maguelonne DEJEANT-PONS Spatial Planning and Landscape Division Council of Europe Introduction «The landscape...... has an important public interest

More information

EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL RAPEX Report

EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL RAPEX Report EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL Directorate B - Consumer Affairs B3 - Product and service safety RAPEX Report Background The Rapid Alert System for non-food consumer

More information

EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP

EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP Strasbourg, 21 April 2011 CEP-CDPATEP (2011) 1E Rev. EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP 6 th COUNCIL OF EUROPE CONFERENCE ON THE EUROPEAN LANDSCAPE CONVENTION DRAFT AGENDA Council of Europe Palais

More information

Gas meters - Additional functionalities

Gas meters - Additional functionalities Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values Metallic materials - Vickers hardness test - Part 4: Tables and hardness values EESTI

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 21171:2006 Medical gloves - Determination of removable surface powder Medical gloves - Determination of removable surface powder EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

PETROLEUM AND NATURAL GAS

PETROLEUM AND NATURAL GAS IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800

More information

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 23910:2007 Leather - Physical and mechanical tests - Measurement of stitch tear resistance Leather - Physical and mechanical tests - Measurement of stitch tear resistance EESTI

More information

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard

More information

English version. Humanitarian Mine Action - EOD Competency Standards - Part 4: Competency for EOD level 4

English version. Humanitarian Mine Action - EOD Competency Standards - Part 4: Competency for EOD level 4 CEN WORKSHOP CWA 15464-4 December 2005 AGREEMENT ICS 95.020 English version Humanitarian Mine Action - EOD Competency Standards - Part 4: Competency for EOD level 4 This CEN Workshop Agreement has been

More information

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines

More information

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010) Irish Standard I.S. EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) NSAI 2011 No copying without

More information

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) Irish Standard I.S. EN ISO 2919:2014 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) CEN 2014 No copying without NSAI permission except as

More information

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version )

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version ) Irish Standard I.S. EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10 -01) NSAI 2012 No copying without NSAI permission except

More information

Personal protective equipment - Safety footwear (ISO 20345:2011)

Personal protective equipment - Safety footwear (ISO 20345:2011) Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

Chapter 4 Availability of International E-waste Statistics

Chapter 4 Availability of International E-waste Statistics Chapter 4 Availability of International E-waste Statistics At the international level, monitoring of e-waste quantities is essential to track developments, set and monitor targets, and identify policies.

More information

The BION Biodiversity Network linking stakeholder from local, national, and international organizations

The BION Biodiversity Network linking stakeholder from local, national, and international organizations The BION Biodiversity Network linking stakeholder from local, national, and international organizations Dr. Jens Mutke Nees-Institute for Biodiversity of Plants, Univ. Bonn & BION The Biodiversity Network

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods Dentistry - Powered toothbrushes - General requirements and test methods EESTI STANDARDIKESKUS

More information

WATER QUALITY - CRITERIA FOR

WATER QUALITY - CRITERIA FOR STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE

More information

ISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test

ISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test INTERNATIONAL STANDARD ISO 12957-2 First edition 2005-02-15 Geosynthetics Determination of friction characteristics Part 2: Inclined plane test Géosynthétiques Détermination des caractéristiques de frottement

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

PLASTICS - DETERMINATION OF THE MELT

PLASTICS - DETERMINATION OF THE MELT IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique

More information

List of nationally authorised medicinal products

List of nationally authorised medicinal products 3 December 2015 EMA/40805/2016 Procedure Management and Committees Support Active substance: human anti-d immunoglobulin Procedure No.: PSUSA/00001614/201503 30 Churchill Place Canary Wharf London E14

More information

Irish Standard I.S. EN :2011

Irish Standard I.S. EN :2011 Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying

More information

Interact capitalisation plan July Summary. What is capitalisation in Interreg?

Interact capitalisation plan July Summary. What is capitalisation in Interreg? Interact capitalisation plan July 2016 Summary What is capitalisation in Interreg? Capitalisation in Interreg can be understood as an integrated building process that gathers valuable programme and project

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17221 April 2018 ICS 91.140.70 English Version Guidance on the application of CE marking and preparation of Declaration of Performance for

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information