Multi-Zone Wireless Control Training Systems ( )

Size: px
Start display at page:

Download "Multi-Zone Wireless Control Training Systems ( )"

Transcription

1 Multi-Zone Wireless Control Training Systems ( ) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 11/2018

2 Table of Contents General Description 2 Courseware 2 Topic Coverage 3 List of Available Training Systems 3 Optional Equipment 3 Available Training Systems 4 Equipment Description 9 Optional Equipment Description 21 General Description The Multi-Zone Wireless Control Training Systems form a complete introduction to the multi-zone wireless control of heating, ventilation, and air conditioning (HVAC) systems. They cover rooftop unit and zone controllers interacting via a wireless communication protocol. This includes floating and analog control of a single-zone, as well as multi-zone control. The training system allows students to acquire hands-on experience with industrial HVAC control equipment. Throughout the program, students connect and configure rooftop units and zone controllers. They also perform troubleshooting exercises on the training system. The course material covers important topics related to HVAC systems, such as heating, cooling, free cooling, and ventilation. The Multi-Zone Wireless Control Training Systems are part of the HVAC-R line of products. Three variants are available: Model is a complete training system that includes a workstation with enough space to accommodate two student groups. Model 3467-A is a complete training system that does not include the above-mentioned workstation. It is designed to allow a second team of students to perform exercises on the workstation provided with Model Model 3467-B is an add-on to the Electric Heating Training System, Model It provides to users that already have this system all the equipment necessary to complete the exercises in the Multi-Zone Wireless Control Training System, Model , without any unnecessary duplication of equipment. A complementary training system is also available as an add-on to any of the above Multi-Zone Wireless Control Training Systems: Model 3468 is an add-on that covers human-machine interfaces (HMI) with a supervisory controller connected to the training system. It also provides an introduction to lighting control and fire alarm protection in a building. Courseware Full-color courseware is included with the Multi-Zone Wireless Control Training System. The student manual provides all the theoretical matter required, lab exercise procedures to be performed with the training equipment, and review questions. The instructor guide has the same content as the student manual plus the answers to procedure and review questions. 2 Festo Didactic

3 Topic Coverage HVAC systems Rooftop units and rooftop unit controllers Floating and analog control Networks Communication protocols Heating Cooling and free cooling Energy savings Ventilation Occupancy modes and schedules Single-zone and multi-zone systems Troubleshooting Estimated program duration: 15 hours List of Available Training Systems Model Qty Description 1 Multi-Zone Wireless Control Training System ( ) 1 Multi-Zone Wireless Control Training System (Second Team Add-On) (3467-A0) 1 Multi-Zone Wireless Control Training System (Add-On to Model ) (3467-B0) 1 Lighting and Fire Alarm Training System Add-On ( ) Optional Equipment Model Qty Description 1 Electricity Fundamentals (Manuals on CD-ROM) (89688-A0) Festo Didactic 3

4 Available Training Systems Multi-Zone Wireless Control Training System ( ) The Multi-Zone Wireless Control Training System is a complete introduction to the multi-zone wireless control of heating, ventilation, and air conditioning (HVAC) systems. It covers rooftop units and zone controllers interacting via a wireless communication protocol. This includes floating and analog control of a single-zone, as well as multi-zone control. The training system comprises all the equipment required to perform the exercises in the courseware, as well as a workstation with enough space to accommodate two student groups. List of Equipment Model Qty Description 1 Workstation ( ) 1 Power Source ( ) 1 Control Transformer ( ) 1 Rooftop Unit Controller ( ) 1 Zone Controller (Floating) ( ) 1 Zone Controller (Analog) ( ) 1 Multi-Zone Wireless Control Training System ( ) 1 Multimeter ( ) 1 Test Lead Kit ( ) List of Manuals Manual Description Wireless Multi-Zone HVAC Control (Student Manual) ( ) Wireless Multi-Zone HVAC Control (Instructor Guide) ( ) Table of Contents of the Manual(s) Wireless Multi-Zone HVAC Control (Student Manual) ( ( )) 1 Familiarization 2 Rooftop Unit Control 3 Single-Zone Control (Floating and Analog) 4 Multi-Zone Control 4 Festo Didactic

5 Optional Equipment Model Qty Description 1 Table ( ) System Power Requirements Voltage Current Frequency Intended Location 120 V 12 A 60 Hz On a table able to support the weight of the equipment 1110 x 490 x 1092 mm (43.8 x 19.3 x 43 in) Multi-Zone Wireless Control Training System (Second Team Add-On) (3467-A0) The Multi-Zone Wireless Control Training System (Second Team Add-On) is a complete introduction to the multi-zone wireless control of heating, ventilation, and air conditioning (HVAC) systems. It covers rooftop units and zone controllers interacting via a wireless communication protocol. This includes floating and analog control of a single-zone, as well as multizone control. The training system comprises all the equipment required to perform the exercises in the courseware, without the workstation included in the Multi-Zone Wireless Control Training System, Model It is designed to allow a second team of students to perform exercises on the workstation provided with Model List of Equipment Model Qty Description 1 Power Source ( ) 1 Control Transformer ( ) 1 Rooftop Unit Controller ( ) 1 Zone Controller (Floating) ( ) 1 Zone Controller (Analog) ( ) 1 Multi-Zone Wireless Control Training System ( ) 1 Multimeter ( ) 1 Test Lead Kit ( ) Festo Didactic 5

6 List of Manuals Manual Description Wireless Multi-Zone HVAC Control (Student Manual) ( ) Wireless Multi-Zone HVAC Control (Instructor Guide) ( ) Table of Contents of the Manual(s) Wireless Multi-Zone HVAC Control (Student Manual) ( ( )) 1 Familiarization 2 Rooftop Unit Control 3 Single-Zone Control (Floating and Analog) 4 Multi-Zone Control Optional Equipment Model Qty Description 1 Table ( ) System Power Requirements Voltage Current Frequency 120 V 12 A 60 Hz Intended Location Installed in the workstation of the Multi-Zone Wireless Control Training System, Model Multi-Zone Wireless Control Training System (Add-On to Model ) (3467-B0) The Multi-Zone Wireless Control Training System (Add-On to Model ) is a complete introduction to the multi-zone wireless control of heating, ventilation, and air conditioning (HVAC) systems. It covers rooftop units and zone controllers interacting via a wireless communication protocol. This includes floating and analog control of a single-zone, as well as multizone control. The training system is an add-on to the Electricity Fundamentals Training System, Model It provides to users that already have this system all the equipment necessary to complete the exercises in the Multi-Zone Wireless Control Training System, Model , without any unnecessary duplication of equipment. List of Equipment 6 Festo Didactic

7 Model Qty Description 1 Rooftop Unit Controller ( ) 1 Zone Controller (Floating) ( ) 1 Zone Controller (Analog) ( ) 1 Multi-Zone Wireless Control Training System ( ) 1 Test Lead Kit (46295-B7) List of Manuals Manual Description Wireless Multi-Zone HVAC Control (Student Manual) ( ) Wireless Multi-Zone HVAC Control (Instructor Guide) ( ) Table of Contents of the Manual(s) Wireless Multi-Zone HVAC Control (Student Manual) ( ( )) 1 Familiarization 2 Rooftop Unit Control 3 Single-Zone Control (Floating and Analog) 4 Multi-Zone Control Optional Equipment Model Qty Description 1 Table ( ) System Intended Location Installed in the workstation of the Electricity Fundamentals Training System, Model Lighting and Fire Alarm Training System Add-On ( ) The Lighting and Fire Alarm Training System Add-On complements the Multi-Zone Wireless Control Training System, Model It covers human-machine interfaces (HMI) with a supervisory controller connected to the training system, and provides an introduction to lighting control and fire alarm in a building. List of Equipment Festo Didactic 7

8 Model Qty Description 1 Supervisory Controller ( ) 1 Network Relay ( ) 1 Network Station ( ) 1 Single-Zone Fire Alarm Control Panel ( ) 1 Fire Alarm Initiating Devices ( ) 1 Fire Alarm Notification Appliance ( ) 1 Test Lead Kit ( ) List of Manuals Manual Description Wireless Multi-Zone HVAC Control (Student Manual) ( ) Wireless Multi-Zone HVAC Control (Instructor Guide) ( ) Table of Contents of the Manual(s) Wireless Multi-Zone HVAC Control (Student Manual) ( ( )) 1 Supervisory Controller 2 Lighting Control 3 Fire Alarm System Part 1 4 Fire Alarm System Part 2 Optional Equipment Model Qty Description 1 Electricity Fundamentals (Manuals on CD-ROM) (89688-A0) System Intended Location Installed in the workstation of the Multi-Zone Wireless Control Training System 8 Festo Didactic

9 Equipment Description Workstation ( ) The workstation allows two student groups to work simultaneously. The structure is pre-assembled, made of steel, and intended for use on a table (not supplied, offered as option). Four pairs of mounting rails firmly hold the modules of the HVAC-R line of products in place. One holder on each side permits users to neatly arrange the test leads. A touch-screen computer mount (not supplied, offered as option) can be attached to either side. Available Space Intended Location Power Source ( ) Provides enough space for two student teams, one on each side. On a table able to support the weight of the equipment The Power Source provides power to the other modules of the training system through 4 mm terminals. The module can be powered via standard single-phase ac power outlets. The power source output voltage is equal to the voltage of the ac power network to which the power source is connected. A thermal-magnetic circuit breaker provides overcurrent and shortcircuit protection. Festo Didactic 9

10 Power Requirements Current Service Installation Power Output Voltage Current Frequency Circuit Breaker Type Ratings 12 A Standard single-phase ac outlet 120 V 12 A 60 Hz Two-pole, current-limiting, thermal-magnetic 12 A 292 x 149 x 90 mm (11.5 x 5.87 x 0.35 in) Control Transformer ( ) The Control Transformer converts the ac power network voltage to 24 V ac voltage for control purposes. It has taps on the primary side to accommodate different input voltages. Access to the primary windings of the transformer is achieved via 4 mm terminals, while access to the secondary windings is achieved via 2 mm terminals. Terminals on the primary winding as well as the secondary winding are fuse-protected. The module also includes four fault-insertion switches to teach the principles of troubleshooting, as well as two ground terminals. Control Transformer Ratings Primary Terminals Secondary Terminals Fuse 1 Location Ratings Fuse 2 Location Ratings Fuse 3 Location Ratings Fuse 4 Location Ratings Fault-Insertion Switches 4 75 VA 50/60 Hz 0 V, 120 V, 208 V, 240 V, and 480 V 0 V and 24 V 120 V primary terminal 250 V 0.75 A TT 208 V primary terminal 250 V 0.5 A TT 240 V primary terminal 250 V 0.5 A TT 0 V secondary terminal 250 V 3 A TT 292 x 149 x 90 mm (11.5 x 5.87 x 0.35 in) 10 Festo Didactic

11 Supervisory Controller ( ) The Supervisory Controller is primarily used to monitor and control the local network of controllers. A graphical interface, accessed through a remote computer, regroups the necessary information on the system (temperatures, CO2 levels, opening of dampers, etc.) and provides direct control over the inputs and the outputs. This interface (HMI) is particularly useful to troubleshoot the HVAC system. In addition to the HVAC equipment, the Supervisory Controller also manages lighting systems and other electrical equipment to ensure the comfort of the occupants. The Supervisory Controller module connects to other devices via several communication protocols, such as Ethernet (access to the interface), Zigbee (wireless network), and BACnet (FC bus communications). The module requires power from the Power Source, Model Power Requirements Communication Protocols Communication Protocols V ac 0.65 A Hz Ethernet Zigbee BACnet Festo Didactic 11

12 Rooftop Unit Controller ( ) as two ground terminals. The Rooftop Unit Controller is fitted with a typical rooftop unit controller in the module upper section. It communicates with the zone controllers via the Zigbee wireless protocol. A single multiple-strand cable connects all sensors from the Multi- Zone Wireless Control Layout, Model 46267, while 2 mm leads relay the output signals from the module to the layout. The Rooftop Unit Controller is powered using the 24 V ac terminals of the Control Transformer, Model The module also includes four faultinsertion switches to teach the principles of troubleshooting, as well Rooftop Unit Controller Type Z-Air ZR3520w Terminals RC Power supply for cooling and fan RH Power supply for heating G Blower output Y1 and Y2 Cooling stage 1 and 2 outputs W1 and W2 Heating stage 1 and 2 outputs BPD Bypass damper 0-10 V dc analog output EC Economizer 0-10 V dc analog output Sensors Input DC Discharge air temperature sensor input OS Outdoor air temperature sensor input Scom Return air, discharge air, and outdoor air sensors reference input RS Return air temperature sensor input AI Airflow 0-5 V dc analog input SP Static pressure 0-5 V dc analog input Fault-Insertion Switches x 149 x 90 mm (11.5 x 5.87 x 0.35 in) 12 Festo Didactic

13 Zone Controller (Floating) ( ) as two ground terminals. The Zone Floating Controller is fitted with a typical floating controller in the module upper section. Communication with the rooftop unit controller is achieved via the Zigbee wireless protocol. The controller uses floating control to manage the opening/closing of the zone damper and local heating in the zone. Buttons and switches are available on the module faceplate to set the different zone parameters. The Zone Floating Controller is powered using the 24 V ac terminals of the Control Transformer. The module also includes four faultinsertion switches to teach the principles of troubleshooting, as well Zone Floating Controller Type Z-Air ZR3150W Switches and Control Knobs Switches and Control Knobs Temperature sensor internal/remote switch Occupancy sensor open/losed switch Temperature control knob CO2 level control knob Terminals BO5 Reheat 24 V output, triac-isolated BO3 and BO4 Reheat 24 V ac floating outputs BO1 and BO2 Damper 24 V ac floating outputs Fault-Insertion Switches x 149 x 90 mm (11.5 x 5.87 x 0.35 in) Festo Didactic 13

14 Zone Controller (Analog) ( ) The Zone Analog Controller module has a typical analog controller with motion sensor installed in the top section. It communicates with the rooftop unit controller with the Zigbee wireless protocol. It uses analog control to manage the opening/closing of the zone damper and local heating in the zone. Buttons and switches serve to set the characteristics of the zone. The Zone Analog Controller module must be powered using the 24 V ac terminals of the Control Transformer module. It is equipped with four fault switches and two ground terminals. Zone Analog Controller Type Z-Air ZR3111W Switches and Control Knobs Switches and Control Knobs Temperature sensor internal/remote switch Occupancy sensor open/losed switch Temperature control knob CO2 level control knob Terminals BO5 Reheat 24 V output, triac-isolated AO1 Damper 0-10 V dc analog output AO2 Reheating 0-10 V dc analog output Fault-Insertion Switches x 149 x 90 mm (11.5 x 5.87 x 0.35 in) Multi-Zone Wireless Control Training System ( ) The Multi-Zone Wireless Control Training System is the main module of the training system. It represents the building infrastructure (ducts, sensors, dampers, heaters, etc.) and allows the setting of environmental variables such as outside temperature. The first third of the module represents the rooftop unit and the various temperature and pressure sensors. The buttons and connectors have been positioned so that they are close to their schematic 14 Festo Didactic

15 representation. The second and third sections of the module are identical. Each section represents the infrastructure of a zone including the zone damper, duct electric reheater, duct hot water coil, baseboard heater, sensors, etc. Adjusting the different switches and knobs allows students to simulate the output signals sent by the different sensors normally available in a building HVAC system. LEDs and bar meters indicate the status of the different elements, while 2 mm leads relay the output signals from the simulated sensors to the controllers. The power source provides line power to the module. Power Requirements Multi-Zone Wireless Control Training System Fresh Air Flow Economizer Damper RTU Control Board Sensors Static Pressure Outdoor Temperature Return Temperature Bypass Damper Supply Temperature V 1 A Hz Control knob Status display and 0-10 V dc control input 6 terminals, 24 V 50/60 Hz DS, OS, Scom, RS, AI, SP Control knob Control knob Control knob Status display and 0-10 V dc control input Control knob 2 x Damper Status display and 0-10 V dc control input 2 x Floating Actuator (Damper) Open/close LEDs and 2 terminals, 24 V 50/60 Hz 2 x Electric Reheater Status display and 0-10 V dc control input 2 x SSR (Electric Reheater) On LED and terminal, 24 V 50/60 Hz 2 x Hot Water Reheater Status display and 0-10 V dc control input 2 x Floating Actuator (Hot Water Reheater) Open/close LEDs and 2 terminals, 24 V 50/60 Hz SSR (Baseboard Heater) On LED and terminal, 24 V 50/60 Hz Network Relay ( ) The Network Relay consists of a deported set of inputs (I) and outputs (O) for the supervisory controller. The state of the different I/Os transits via the BACnet communication protocol to and from the supervisory controller. LEDs corresponding to each input and output are turned on or off on the circuit board to reflect the state of the inputs and outputs. Two LEDs, Light 1 and Light 2, represent large fluorescent lights installed in a zone. The Network Relay is powered using the 24 V ac terminals of the Control Transformer, Model The module also includes six fault- Festo Didactic 15

16 insertion switches to teach the principles of troubleshooting, as well as two ground terminals. Power Requirements 24 V 0.4 A 50/60 Hz Communication Protocol BACnet Binary Inputs Number 4 Type Dry contacts Relay Outputs Number 4 Contacts 1 normally open and 1 normally closed Ratings 120 V 10 A 50/60 Hz LEDs Number 2 Ratings 24 V ac 1 W Fault-Insertion Switches x 225 x 90 mm (11.5 x 8.86 x 0.35 in) Network Station ( ) The Network Station consists of two light switches whose state is communicated to the supervisory controller via the BACnet protocol. The module allows manual operation of the lights on the Network Relay, Model The Network Station is powered using the 24 V ac terminals of the Control Transformer, Model The module also includes four faultinsertion switches to teach the principles of troubleshooting, as well as two ground terminals. Power Requirements 24 V 8 ma 50/60 Hz Communication Protocol BACnet Light Switches Number 2 Fault-Insertion Switches x 149 x 90 mm (11.5 x 5.87 x 0.35 in) 16 Festo Didactic

17 Single-Zone Fire Alarm Control Panel ( ) The Single-Zone Fire Alarm Control Panel receives signals from the Fire Alarm Initiating Devices, Model 46275, and sends emergency signals to the Fire Alarm Notification Appliance, Model 46276, (to alert the occupants). The control panel is also fitted with alarm and trouble relays that interface with other systems in a building to indicate alarm events or circuit troubles. The front panel of the control panel consists of three main sections: indicator LEDs, control buttons, and connections. The Single-Zone Fire Alarm Control Panel includes two standby batteries mounted in the module to power the system during temporary power interruption. The module also includes three fault-insertion switches to teach the principles of troubleshooting, as well as two ground terminals. Power Requirements Initiating Device Notification Appliance Alarm Relay Contacts Ratings (dc) Ratings (ac) Trouble Relay Contacts Ratings (dc) Ratings (ac) Fault-Insertion Switches 4 24 V 1.8 A 50/60 Hz 24 V dc 0.05 A 24 V dc 1 A 1 normally open and 1 normally closed 30 V dc 1 A 120 V ac 0.5 A 50/60 Hz 1 normally open and 1 normally closed 30 V dc 1 A 120 V ac 0.5 A 50/60 Hz Festo Didactic 17

18 Fire Alarm Initiating Devices ( ) The Fire Alarm Initiating Devices module consists of a manual pull station and a photoelectric smoke detector. Initiating devices are used to detect and send information to the control panel when a risk or an abnormal condition is detected. The module includes six faultinsertion switches to teach the principles of troubleshooting, as well as two ground terminals. Power Requirements 24 V dc 0.05 A Includes: Includes: Manual pull station Photoelectric smoke detector End-of-Line Resistor 4.7 k 0.5 W Fault-Insertion Switches x 225 x 90 mm (11.5 x 8.86 x 0.35 in) 18 Festo Didactic

19 Fire Alarm Notification Appliance ( ) The Fire Alarm Notification Appliance module consists of a horn-strobe station and an end-ofline resistor. The horn-strobe station is a notification appliance that uses audible and visible signals to alert the occupants to take action in the event of a fire or any other emergency. The module also includes four faultinsertion switches to teach the principles of troubleshooting, as well as two ground terminals. Power Requirements 24 V dc 0.34 A End-of-Line Resistor 4.7 k 0.5 W Fault-Insertion Switches x 149 x 90 mm (11.5 x 5.87 x 0.35 in) Festo Didactic 19

20 Multimeter ( ) The multimeter is used to perform voltage, current, and resistance measurements. It is used for troubleshooting exercises requiring basic electrical measurements. Multimeter DC/AC Voltage DC/AC Current Resistance 0.1 mv to 600 V 0.1 µa to 10 A 0.1 to 40 M Capacitance 1 pf to 100 µf Frequency Temperature Hz to 10 MHz 760 C (1400 F) Duty Cycle % Autoranging Feature Yes Display Counts 4000 Basic Accuracy 0.5% Test Lead Kit ( ) 150 x 70 x 48 mm (5.9 x 2.75 x 1.8 in) 255 g (9 oz) The Test Lead Kit contain all the test leads required to complete the exercises presented in the course material. Test Lead Kit ( ) The Test Lead Kit contain all the test leads required to complete the exercises presented in the course material. 20 Festo Didactic

21 Test Lead Kit (46295-B7) The Test Lead Kit contain all the test leads required to complete the exercises presented in the course material. Optional Equipment Description Table (Optional) ( ) The Table is designed to support the Workstation, Model 3451, as well as any equipment installed in it, and provides enough space for additional small items such as a laptop computer. The table surface is made of hard wood. Four lockable casters ensure easy transportation. Capacity (Distributed Load) Intended Location kg (500 lb) On the floor (stands on casters) 914 x 1524 x 762 mm (36 x 60 x 30 in) Festo Didactic 21

22 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic

Lighting and Fire Alarm Training System Add- On ( )

Lighting and Fire Alarm Training System Add- On ( ) Lighting and Fire Alarm Training System Add- On 588476 (3468-00) LabVolt Series Datasheet Festo Didactic en 11/2018 Table of Contents General Description 2 List of Equipment 2 List of Manuals 2 Table of

More information

Geothermal Training System

Geothermal Training System 46126-00 Geothermal Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Geothermal Heat Pump 3 Ground-Loop Heat Exchanger 4 Domestic

More information

Refrigeration Training System

Refrigeration Training System 3401-20 Refrigeration Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits 2 List of Manuals 3 Table

More information

Geothermal Training System (46126-A0)

Geothermal Training System (46126-A0) Geothermal Training System 582385 (46126-A0) LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 03/2019 Table of Contents General Description 2 Geothermal Heat Pump 3 Ground-Loop Heat Exchanger 4

More information

3400-3A Refrigeration System Demonstrator

3400-3A Refrigeration System Demonstrator 3400-3A Refrigeration System Demonstrator LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits 2 List of Manuals

More information

46126-A2 Geothermal Training System

46126-A2 Geothermal Training System 46126-A2 Geothermal Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 Geothermal Heat Pump 3 Ground-Loop Heat Exchanger 4 Domestic

More information

EDS Solar Thermal ( )

EDS Solar Thermal ( ) EDS Solar Thermal 8046647 (46121-10) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 10/2018 Table of Contents General Description 2 Courseware 2 Features & Benefits 3 List of Equipment 3 Manual

More information

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide. SE8600 Series Room Controllers

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide. SE8600 Series Room Controllers Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide SE8600 Series Room Controllers 2 TABLE OF CONTENTS Overview 2 SE8600 Rooftop Unit and Indoor Air Quality Controllers 3 SE8600UxBxx 2 Heating

More information

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers TABLE OF CONTENTS Overview 2 VT86X0U5X00B 2 heating / 2 Cooling for Rooftop unit and Indoor air quality 3

More information

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers TABLE OF CONTENTS Overview 2 VT8600 Rooftop Unit Heat Pump and Indoor Air Quality Controllers 3 VT86X0U5X00B

More information

Addressable Fire Alarm System Fire Alarm Training System

Addressable Fire Alarm System Fire Alarm Training System Industrial Maintenance Addressable Fire Alarm System Fire Alarm Training System Job Sheets - Courseware Sample 85153-F0 Order no.: 85153-30 First Edition Revision level: 06/2015 By the staff of Festo Didactic

More information

0 C to 50 C ( 32 F to 122 F ) 0% to 95% R.H. non-condensing. 30 to 95% R.H. Dry contact across terminal BI1, BI2 & UI3 to Scom

0 C to 50 C ( 32 F to 122 F ) 0% to 95% R.H. non-condensing. 30 to 95% R.H. Dry contact across terminal BI1, BI2 & UI3 to Scom Viconics VT7350 Series PIR Ready Fan-coil Controllers General The VT7350 series are PIR Ready low-voltage microprocessor-based fan-coil controllers. Models are available controlling single speed and multi-speed

More information

Consultant Specification AGILE Wireless Fire Detection System

Consultant Specification AGILE Wireless Fire Detection System Contents Scope of Work... 2 The EN54 Part 2 & 4 Fire System... 2 Standards... 2 Wireless Intelligent Photoelectric Smoke Detector Specification... 4 Wireless Intelligent Thermal Heat Detector Specification...

More information

Fan Coil Unit (FCU) Application Guide

Fan Coil Unit (FCU) Application Guide Fan Coil Unit (FCU) Series Room Controllers TABLE OF CONTENTS and SCs Fan coil terminal equipment controllers 2 A5000 - VC3500E5000: Heating/cooling: 4-pipe fan coil unit with 3-speed fan, 2-position valves

More information

SECTION DIGITAL, ADDRESSABLE FIRE-ALARM SYSTEM

SECTION DIGITAL, ADDRESSABLE FIRE-ALARM SYSTEM SECTION 283111 - DIGITAL, ADDRESSABLE FIRE-ALARM SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

TEC2620 Series Non-Programmable Fan Coil Network Thermostat Controller and Remote I/O Relay Packs

TEC2620 Series Non-Programmable Fan Coil Network Thermostat Controller and Remote I/O Relay Packs TEC2620 Series Non-Programmable Fan Coil Network Thermostat ler and Remote I/O Relay Packs TEC2620H-0, TEC2620C-0, TEC2620H-0+PIR, TEC2620C-0+PIR, TEC2621H-0, TEC2621C-0, TEC2621H-0+PIR, TEC2621C-0+PIR

More information

Interface and EOL Modules 8

Interface and EOL Modules 8 Interface and EOL Modules Interface Modules Series 420 25 Interface Modules Series 100 291 EOL Modules 293 254 Interface and EOL Modules Interface Modules Series 420 Interface Modules Serie 420 Interface

More information

SECTION : FIRE ALARM & DETECTION SYSTEMS

SECTION : FIRE ALARM & DETECTION SYSTEMS SECTION 28 31 10: FIRE ALARM & DETECTION SYSTEMS 1. GENERAL A. This section applies to fire detection/alarm system and carbon monoxide system components and equipment installed during new construction

More information

Master devices. Type X-AIR-ZMAS. Zone master module for up to 25 zone modules, with integral webserver and interfaces to higher-level systems

Master devices. Type X-AIR-ZMAS. Zone master module for up to 25 zone modules, with integral webserver and interfaces to higher-level systems X X testregistrierung Type Web server, also for mobile devices Zone modules Zone master module for up to 25 zone modules, with integral webserver and interfaces to higher-level systems X-AIRCONTROL zone

More information

Fire Alarm System Fundamentals

Fire Alarm System Fundamentals Fire Alarm System Fundamentals Mircom is the largest and oldest privately owned fire alarm and life safety manufacturer in North America and 5th largest overall with 50 years of industry experience. Mircom

More information

VT8300 Series Installation Guide 24 Vac Low Voltage

VT8300 Series Installation Guide 24 Vac Low Voltage Vac Low Voltage mercial and Hotel/Lodging HVAC Fan Coil Applications CONTENTS Installation Configurable BI/UI Universal Inputs Overview Setup Screen Display Terminal Identification & Function Terminal

More information

A. Base Bid: 1. Heating Contractor provide: a. Control sequences for HVAC systems, subsystems, and equipment.

A. Base Bid: 1. Heating Contractor provide: a. Control sequences for HVAC systems, subsystems, and equipment. SECTION 23 09 93 - SEQUENCE OF OPERATIONS FOR HVAC CONTROLS PART 1 - GENERAL 1 WORK INCLUDES A. Base Bid: Heating Contractor provide: Control sequences for HVAC systems, subsystems, and equipment. B. Alternate

More information

Specification/ Data Sheet

Specification/ Data Sheet Specification/ Data Sheet TRITON RP Agent Release Control Panel FEATURES Agent Release Control Panel designed specifically for suppression release operation with: Four initiating device circuits (IDCs)

More information

RS485 MODBUS Module 8AI

RS485 MODBUS Module 8AI Version 1.4 15/04/2013 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained in this manual have

More information

Functional Performance Test

Functional Performance Test Fire Alarm Control Panel & Fire Alarm Annunciator Panel Notify all building occupants that testing will be conducted. Fire alarm contractor shall have personnel with 2-way radios at the fire alarm control

More information

Matrix2000. User Guide - CPD Advanced Analog Fire Alarm Control Panel 4 24 Zones. Version: 2.0 Revision: 1

Matrix2000. User Guide - CPD Advanced Analog Fire Alarm Control Panel 4 24 Zones. Version: 2.0 Revision: 1 Matrix2000 User Guide - CPD Advanced Analog Fire Alarm Control Panel 4 24 s Version: 2.0 Revision: 1 IMPORTANT INFORMATION Limitation of liability It is mandatory, Matrix2000 panel to be installed in accordance

More information

16.34 Multiplex Fire Alarm System Construction Standards Page 1 of 5

16.34 Multiplex Fire Alarm System Construction Standards Page 1 of 5 Construction Standards Page 1 of 5.1 General Description.1 The University requires that all new fire alarm system control panel, components, and devices, as required for the project, be Secutron 2900 Series

More information

elite Model ELN Centralized Emergency Lighting Inverter Systems 550 W to 1.5 KW Systems

elite Model ELN Centralized Emergency Lighting Inverter Systems 550 W to 1.5 KW Systems 5/25/16 rev 6 elite Model ELN General Specification 550 W to 1.5 KW elite Model ELN Centralized Emergency Lighting Inverter Systems 550 W to 1.5 KW Systems 1.0 General General Specification This specification

More information

LORAIN CSP DC Power System

LORAIN CSP DC Power System DC Power for Business-Critical Continuity Key Features Compact flexibility provides more space for revenue generating equipment Constant power delivers more current at lower voltages to meet load or recharge

More information

UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW

UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 12/23/16 Rev 9 UltraLITE Model ELU General Specification 4.2 KW to 5 KW UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 1.0 General General Specification This specification describes

More information

Project No Belleville Fire Hall/Headquarters and Emergency Operations Centre Section Belleville, Ontario Page 1 of 10

Project No Belleville Fire Hall/Headquarters and Emergency Operations Centre Section Belleville, Ontario Page 1 of 10 Belleville, Ontario Page 1 of 10 1 GENERAL 1.1 GENERAL REQUIREMENTS.1 The General Conditions of CCDC2-2008, and the General requirements of Division 1, form part of this Section and must read in conjunction

More information

Better Design, Better Control, Better Systems.

Better Design, Better Control, Better Systems. Product Catalog Better Design, Better Control, Better Systems. At tekmar Control Systems, we believe the indoor comfort of a building depends on the performance of its heating, ventilating & air conditioning

More information

Tri-Stack Smart System

Tri-Stack Smart System Tri-Stack Smart System TM Notes & Warnings - The protection provided by this equipment may be impaired if it is not used in the manner specified herein. - Ensure all wiring meets applicable national and

More information

Reshaping Duct Smoke Detection

Reshaping Duct Smoke Detection Reshaping Duct Smoke Detection When System Sensor introduced the Innovair line of duct smoke detectors and accessories, it was revolutionary. Mechanical contractors and fire systems installers like you

More information

SECTION SEQUENCE OF OPERATION FOR HVAC CONTROLS PART 1 GENERAL

SECTION SEQUENCE OF OPERATION FOR HVAC CONTROLS PART 1 GENERAL SECTION 15910 SEQUENCE OF OPERATION FOR HVAC CONTROLS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division

More information

Addressable Fire Alarm Control Panel

Addressable Fire Alarm Control Panel PRODUCT SPECIFICATION XR2400F Addressable FACP Addressable Fire Alarm Control Panel Description The DMP XR2400F Addressable Fire Alarm Control Panel is an expandable Fire Alarm Control with built-in DACT

More information

LORAIN CIP 4890/48120 DC Power System

LORAIN CIP 4890/48120 DC Power System DC Power for Business-Critical Continuity Key Features Compact flexibility provides rectifiers, distribution, and controller in one shelf Constant power delivers more current at lower voltages to meet

More information

LifeAlarm Fire Alarm Control Panels

LifeAlarm Fire Alarm Control Panels LifeAlarm Fire Alarm Control Panels UL, ULC Approved* Features Control panel operator convenience features: Wide viewing angle 2 x 20 (40 character) alphanumeric LCD and dedicated LEDs provide convenient

More information

Sequence of operation

Sequence of operation Sequence of operation IPS 4000 secondary variable speed control File No: 90.96 Date: february 21, 2013 Supersedes: new Date: new sequence of operation ips 4000 2 list of abbreviations: adj: Field Adjustable

More information

TrueAlarm Analog Sensing

TrueAlarm Analog Sensing TrueAlarm Analog Sensing UL, ULC Listed* Addressable Duct Sensor Housings with TrueAlarm Photoelectric Sensor; Available with Multiple Relay Features Compact air duct sensor housing with clear cover to

More information

Hydronic & HVAC Control Systems

Hydronic & HVAC Control Systems tekmar 218 Full Line Catalog Hydronic & HVAC Control Systems HVAC Multi-Staging Alternative Energy Zoning Snow Melting Setpoint tekmarcontrols.com tekmarcontrols.com Better Design, Better Control, Better

More information

A Beginners Guide to Inner Range Systems

A Beginners Guide to Inner Range Systems A Beginners Guide to Inner Range Systems Inner Range manufactures a range of integrated Intrusion Detection and Access Control systems to cover sites of any size, while sharing a common configuration layout.

More information

Room Temperature Controller

Room Temperature Controller 3 331 Synco 100 Room Temperature Controller with 2 outputs DC 0 RLA162 Room temperature controller for basic ventilation, air conditioning and heating plants Compact design with 2 analog control outputs

More information

Process Alarm Module RTA 421

Process Alarm Module RTA 421 Technical Information TI 074R/24/ae Process Alarm Module RTA 421 Alarm module and power supply for monitoring current or voltage signals Application Areas Plant and machine construction Panel builders

More information

DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi 50 (P/N 10-071) is a state-of-the-art true intelligent digital peer-to-peer modular suppression control system.

More information

PWGSC Ontario MULTIPLEX FIRE ALARM SYSTEM Sect Region Project Page 1 Number R

PWGSC Ontario MULTIPLEX FIRE ALARM SYSTEM Sect Region Project Page 1 Number R Region Project Page 1 PART 1 - GENERAL 1.1 REFERENCES.1 CAN/ULC-S524-2006, Standard for the Installation of Fire Alarm Systems..2 CAN/ULC-S525-2007, Audible Signal Device for Fire Alarm Systems..3 CAN/ULC-S526-2007,

More information

Danfoss gas detection units

Danfoss gas detection units Data sheet Danfoss gas detection units Types GD Premium, Premium+, Premium Duplex, Premium Remote, Premium Flex and Premium Uptime The Premium line gas detection units are used for monitoring and warning

More information

EKC 347 Liquid Level Controller REFRIGERATION AND AIR CONDITIONING. Manual

EKC 347 Liquid Level Controller REFRIGERATION AND AIR CONDITIONING. Manual EKC 347 Liquid Level Controller REFRIGERATION AND AIR CONDITIONING Manual Contents Introduction...3 Valve compatibility...3 Features...3 Application examples...3 Ordering...3 Operating the EKC 347...4-5

More information

FireNET Plus Wiring Instructions

FireNET Plus Wiring Instructions FireNET Plus Wiring Instructions This manual provides wiring instructions for the 1 loop and 2 loop version of the FireNET Plus panels, which supports our finest Hochiki s DCP protocol. Note: Refer to

More information

Installation and Operation. Tracer ZN521 Zone Controller CNT-SVX07C-EN

Installation and Operation. Tracer ZN521 Zone Controller CNT-SVX07C-EN Installation and Operation Tracer ZN521 Zone Controller CNT-SVX07C-EN Installation and Operation Tracer ZN521 Zone Controller CNT-SVX07C-EN April 2005 CNT-SVX07C-EN Tracer ZN521 Zone Controller Installation

More information

5, SE GÅNGHESTER,

5, SE GÅNGHESTER, KSUB Control and monitoring unit Valid from week of manufacture 48/2005 Description The KSUB is a control and monitoring unit designed to control various types of fire/smoke dampers and fans in a flexible

More information

SECTION SEQUENCE OF OPERATIONS FOR HVAC CONTROLS

SECTION SEQUENCE OF OPERATIONS FOR HVAC CONTROLS PART 1 - GENERAL SECTION 23 09 93 SEQUENCE OF OPERATIONS FOR HVAC CONTROLS 1.1 SUMMARY A. This Section includes control sequences for HVAC systems, subsystems, and other equipment. B. See Division 23 Section

More information

Reshaping Duct Smoke Detection

Reshaping Duct Smoke Detection Reshaping Duct Smoke Detection Y TE + TEST COIL TEST COIL + IN + OUT RA + RA + RTS (+) 24 VDC AUX POWER SUPPLIED BY USER (100mA SUPPLY) 24 VAC (+10%, 15%) FULL WAVE RECTIFIED, UNFILTERED POWER MAY BE USED

More information

SECTION SEQUENCE OF OPERATIONS FOR HVAC CONTROLS

SECTION SEQUENCE OF OPERATIONS FOR HVAC CONTROLS SECTION 23 09 93 SEQUENCE OF OPERATIONS FOR HVAC CONTROLS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes control sequences for HVAC systems, subsystems, and equipment. B. See Division 23 Section

More information

DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION Fike s CyberCat 254 (P/N 10-066) is a state-of-the-art true intelligent digital peer-to-peer modular fire alarm control system.

More information

Smoke Damper Interface (230V)

Smoke Damper Interface (230V) Always READ this document BEFORE INSTALLATION. Please Retain for future reference. This product forms part of a life safety system. Failure to correctly store, handle, install and maintain the product

More information

Metasys System Extended Architecture Smoke Control UL 864 UUKL Compliance

Metasys System Extended Architecture Smoke Control UL 864 UUKL Compliance Metasys System Extended Architecture Smoke Control UL 864 UUKL Compliance Checklist Code No. LIT-1201754 Release 1.2 Issued February 10, 2005 Document Introduction.................................................

More information

DERRY FIRE DEPARTMENT LISTED AGENT CERTIFICATION PROGRAM

DERRY FIRE DEPARTMENT LISTED AGENT CERTIFICATION PROGRAM DERRY FIRE DEPARTMENT LISTED AGENT CERTIFICATION PROGRAM THIS COURSE IS FOR AGENTS WISHING TO DISABLE TRANSMITTING SIGNALS IN ORDER TO PERFORM MAINTENANCE TESTING AND DRILLS. OBJECTIVE The objective of

More information

Instructions for the fan motor control system, SILVER C

Instructions for the fan motor control system, SILVER C Instructions for the fan motor control system, SILVER C 1. General The motor control system is used for controlling the type EC, 0.41-10 kw fan motors in the SILVER C units. The motor control system is

More information

ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE

ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE isocket Smart Relay is a complex Smart House system which is installed in the fuse cabinet (electric cabinet) in the house. We therefore assume that

More information

Addressable NAC Output Module D327A

Addressable NAC Output Module D327A Installation Instructions Notice Addressable NAC Output Module D327A These instructions cover the installation of the D327A Addressable NAC Output Module in an analog system controlled by a Bosch D8024,

More information

GE Lighting. Lighting Controls. DALI Digital Lighting Controls

GE Lighting. Lighting Controls. DALI Digital Lighting Controls GE ighting ighting Controls I Digital ighting Controls the I Protocol Multi-functional control of I-ready GE uminaires 1-1 to I converters available for analogue luminaires I CB Type 2 - complete programmable

More information

INNOVATIVE TRAINING SYSTEMS FOR FUTURE ENGINEERS

INNOVATIVE TRAINING SYSTEMS FOR FUTURE ENGINEERS INNOVATIVE TRAINING SYSTEMS FOR FUTURE ENGINEERS CHAPTER 15: TRAINING SYSTEMS FOR ELECTRICAL INSTALLATIONS 527 Training Panel to Electrical Protective Measures 528 Training Panel to Installation Tests

More information

Instructions for the fan motor control system with integrated wiring terminals SILVER C

Instructions for the fan motor control system with integrated wiring terminals SILVER C Instructions for the fan motor control system with integrated wiring terminals SILVER C 1. General The motor control system is used for controlling the type EC, 0.41-10 kw fan motors in the SILVER C units.

More information

CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM

CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi (P/N 10-068) is a state-of-the-art true intelligent digital peer-topeer modular suppression control system. It is ideal for

More information

Danfoss gas detection Controller unit

Danfoss gas detection Controller unit Data sheet Danfoss gas detection Controller unit The gas detection Controller Unit is used for a centralized monitoring and warning of hazardous gas concentrations. The input signals for the controller

More information

Operating Manual MS220KA and MSR220KA

Operating Manual MS220KA and MSR220KA Temperature Relays and MINIKA, Mains Monitoring, Digital Panel meters MINIPAN, Switching Relays and Controls Operating Manual MS220KA and MSR220KA ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße

More information

Danfoss gas detection unit Type GD Heavy Duty

Danfoss gas detection unit Type GD Heavy Duty Data sheet Danfoss gas detection unit Type GD Heavy Duty The Heavy Duty gas detection units are used for monitoring and warning of hazardous Ammonia gas concentrations. They are intended for ATEX/ IECEx

More information

Lynergy Comfort Control SCR Electric Heater Application Guide

Lynergy Comfort Control SCR Electric Heater Application Guide AG-Lynergy-2 September 18, 217 Lynergy Comfort Control SCR Electric Heater Application Guide Titus Redefine your comfort zone. www.titus-hvac.com 65 Shiloh Road Plano, Texas 7574 972.212.4 Titus, the Titus

More information

PRELIMINARY EDITION

PRELIMINARY EDITION 3 131 PRELIMINARY EDITION 14.01.2003 Synco 700 Heating Controllers Heating controller for medium-size and large buildings. The is used as a heating circuit or primary controller. The controller is supplied

More information

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION IBAS LIGHTING CONTROL

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION IBAS LIGHTING CONTROL PART 0 A/E INSTRUCTIONS 0.01 DESIGN REQUIREMENTS A. Minimum lighting control (base scope of work) shall include all corridors. The lighting in all the corridors shall be turned on (if not already on) if

More information

INSPECTION AND TESTING FORM

INSPECTION AND TESTING FORM INSPECTION AND TESTING FORM Date: Time: SERVICE ORGANIZATION Name: Address: Representative: License No.: MONITORING ENTITY Contact: Monitoring Account Ref. No.: TYPE TRANSMISSION McCulloh Multiplex Digital

More information

Application Data Part Numbers: 33ZCVVTZC-01, 33ZCBC-01, 33ZCVAVTRM, 33ZCFANTRM

Application Data Part Numbers: 33ZCVVTZC-01, 33ZCBC-01, 33ZCVAVTRM, 33ZCFANTRM 3V Control System Variable Volume and Temperature (VVT ) 33ZC Application Data Part Numbers: 33ZCVVTZC-01, 33ZCBC-01, 33ZCVAVTRM, 33ZCFANTRM CONTENTS Page GENERAL...2,3 Zone Controller Control Strategy...2

More information

SECTION LIGHTING CONTROLS

SECTION LIGHTING CONTROLS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 09 23 LIGHTING CONTROLS SPEC WRITER NOTE: 1. Delete between //----// if not applicable to project. Also, delete any other item or paragraph not applicable to

More information

T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and Occupancy Sensing Capability

T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and Occupancy Sensing Capability T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and Occupancy Sensing Capability Product Bulletin T601DFH-4, T602DFH-4, T603DFH-4, T604DFH-4, T605DFH-4, T601DFH-4+PIR, T602DFH-4+PIR,

More information

MODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description

MODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description MODUL-R FIRE ALARM CONTROL PANELS MR-2900/MR-2920 Addressable Fire Alarm Control Panels Description MR-2900 Fire Alarm Control Panel The MR-2900 fire alarm system control unit is the heart of a sophisticated

More information

VAV Thermostat Controller Specification and Installation Instructions. Model TRO24T4XYZ1

VAV Thermostat Controller Specification and Installation Instructions. Model TRO24T4XYZ1 Model TRO24T4XYZ1 Description The TRO24T4XYZ1 is a combination controller and thermostat. The VAV Thermostat Controller is designed for simple and accurate control of any variable air volume box in a number

More information

Index Arc Guard Systems. Arc Guard Systems. Arc Guard Systems Industrial Automation Supply - Tel:

Index Arc Guard Systems. Arc Guard Systems. Arc Guard Systems Industrial Automation Supply   - Tel: Systems Index Systems - Systems Systems...1 -.16 General information Description...1 System description...2 Overview...3 Ordering details Arc monitor with detectors...4 Current sensing unit...5 Technical

More information

SLATE. Base Module INSTALLATION INSTRUCTIONS R8001A1001

SLATE. Base Module INSTALLATION INSTRUCTIONS R8001A1001 SLATE Base Module R8001A1001 INSTALLATION INSTRUCTIONS Scan for more information Application SLATE brings configurable safety and programmable logic together into one single platform. The platform can

More information

Predator Controller Hardware Family

Predator Controller Hardware Family Predator Controller Hardware Family Figure1: Predator Controller Only. Figure 2: Predator VAV Actuator. The LONMARK certified configurable Predator Controller provides direct digital control of a variety

More information

Model LTN-3R Outdoor Rated Uninterruptible Power System Single Phase

Model LTN-3R Outdoor Rated Uninterruptible Power System Single Phase Model LTN-3R Outdoor Rated Uninterruptible Power System Single Phase General Specification 550 VA/Watts 1300 VA/Watts 1.0 GENERAL This specification defines the electrical and mechanical characteristics

More information

Fire Product Catalog

Fire Product Catalog Additional Expansion Modules Fire Product Catalog CLEVER FIRE SOLUTIONS MA 1000 / Analog Addressable Fire Alarm Panel 1 Military Industry Public Buildings Industrial & Commercial Company Profile We are

More information

ELECTRONIC HUMIDISTAT: H200

ELECTRONIC HUMIDISTAT: H200 ELECTRONIC HUMIDISTAT: H00 ONE OR TWO STAGES DESCRIPTION The H00 series low voltage, microcomputerbased PI (proportional and integral) humidistats are designed for accurate humidification and/or dehumidification

More information

TABLE OF CONTENTS GENERAL... 2 A. DEFINITIONS DIGITAL, ADDRESSABLE FIRE ALARM SYSTEM... 2

TABLE OF CONTENTS GENERAL... 2 A. DEFINITIONS DIGITAL, ADDRESSABLE FIRE ALARM SYSTEM... 2 Division 28 ELECTRONIC SAFETY AND SECURITY TABLE OF CONTENTS 28 0000 GENERAL... 2 A. DEFINITIONS...2 28 3111 DIGITAL, ADDRESSABLE FIRE ALARM SYSTEM... 2 A. DESIGN REQUIREMENTS...2 B. CONSTRUCTION REQUIREMENTS...2

More information

ExactLogic BACnet Communicating Thermostat EXL01627 Sequence Datasheet Fan Coil with Modulating Fan and Heat or Cool Floating Heating and Cooling

ExactLogic BACnet Communicating Thermostat EXL01627 Sequence Datasheet Fan Coil with Modulating Fan and Heat or Cool Floating Heating and Cooling ExactLogic BACnet Communicating Thermostat EXL01627 Sequence Datasheet Fan Coil with Modulating Fan and Heat or Cool Floating Heating and Cooling DataSheet ev 1.12.304/4.0 June 14, 2016 Operating Sequence

More information

Solution Guide. UUKL Smoke Control System. 1/6. UL 864, 9th Edition, UUKL Smoke Control Listing. Overview

Solution Guide. UUKL Smoke Control System.  1/6. UL 864, 9th Edition, UUKL Smoke Control Listing. Overview Solution Guide UL 864, 9th Edition, UUKL Smoke Control Listing Overview Applications Distech Controls UUKL smoke control system can be used for: Dedicated smoke control applications: Used exclusively for

More information

ASHRAE Guideline 36 Advanced HVAC Control Sequences

ASHRAE Guideline 36 Advanced HVAC Control Sequences ASHRAE Guideline 36 Advanced HVAC Control Sequences Rick Stehmeyer - Senior Engineer Matt Napolitan, P.E., CCP, CPMP, LEED AP BD+C - Principal Image Source: http://worldatdistance.com/2013/10/07/the-complete-noobs-guide-to-making-a-website//

More information

KELTRON LS 7000 ALARM MANAGEMENT SYSTEM Keltron Alarm Monitoring, Dispatch, and Reporting Software

KELTRON LS 7000 ALARM MANAGEMENT SYSTEM Keltron Alarm Monitoring, Dispatch, and Reporting Software KELTRON LS 7000 ALARM MANAGEMENT SYSTEM Keltron Alarm Monitoring, Dispatch, and Reporting Software OVERVIEW The Keltron LS 7000 Alarm Management System software and computers make up the dispatch portion

More information

Fort Rouge Leisure Centre Section HVAC Upgrades Phase 2 Page 1 of 5 Bid Opportunity No March 2013 FIRE ALARM SYSTEMS

Fort Rouge Leisure Centre Section HVAC Upgrades Phase 2 Page 1 of 5 Bid Opportunity No March 2013 FIRE ALARM SYSTEMS HVAC Upgrades Phase 2 Page 1 of 5 Part 1 General 1.1 SUMMARY.1 Section Includes:.1 Materials and installation for fire alarm systems upgrades..2 Audible signal devices..3 End-of-line devices..4 Sustainable

More information

Models NFPA 1221-A, NFPA 1221-B Public Safety DAS Annunciator Panel. Revision E 61117

Models NFPA 1221-A, NFPA 1221-B Public Safety DAS Annunciator Panel. Revision E 61117 Models NFPA 1221-A, NFPA 1221-B Public Safety DAS Annunciator Panel Revision E 61117 CAUTION: (Read This First) This panel has been designed to make it nearly bullet proof to mistakes made when wiring

More information

Multi-Gas-Controller MGC2

Multi-Gas-Controller MGC2 Page 1 Aug. 2018 Gas measuring, monitoring and warning controller based on state-of-the-art micro-technology for continuous monitoring of the ambient air to detect toxic and combustible gases, refrigerants

More information

Gas Controller Module GC-06

Gas Controller Module GC-06 Page 1 Oct. 2015/2 Measuring, warning and controlling module for toxic, combustible and refrigerant gases and vapours. The gas controller series GC-06 is designed in accordance with the standard EN 50545-1.

More information

Simplex Panel Interface Guide

Simplex Panel Interface Guide Simplex Panel Interface Guide February 2016 SATEON Software Integrations Simplex Panel Interface Guide Issue 1.0, released February 2016 Disclaimer Copyright 2016, Grosvenor Technology. All rights reserved.

More information

SE7200 Series Installation Guide

SE7200 Series Installation Guide SE7200 Series Installation Guide Install Guide for Low Voltage Zoning Room Controller For mercial HVAC Applications CONTENTS Installation 2 Preparation 2 Location 2 Installation 2 Terminal, Identification

More information

Recalibrate the way you look at gas detection

Recalibrate the way you look at gas detection Catalogue Gas detection solution Recalibrate the way you look at gas detection Next generation gas detection for industrial refrigeration The next generation of Danfoss gas detectors are based on a digital

More information

opti-visor ultra-efficient chiller plant automation Typical specification

opti-visor ultra-efficient chiller plant automation Typical specification opti-visor ultra-efficient chiller plant automation Typical File No: 90.893 Date: february 9, 2015 Supersedes: 90.893 Date: april 20, 2012 contents 1.0 Chilled water plant 4 1.1 General system requirements

More information

APPLICATION DATA SHEET

APPLICATION DATA SHEET APPLICATION DATA SHEET Control Systems Transmitters Sensors Accessories Wall, 19 Rack or Panel Mounting Units 110/230V 50/60Hz AC operation 250 Addressable devices as: Relays, 4-20 Inputs or Gas Detectors

More information

FCCP 200: Fume-cupboard indicator and monitor

FCCP 200: Fume-cupboard indicator and monitor Product data sheet 3.1 43.170 FCCP 200: Fume-cupboard indicator and monitor How energy efficiency is improved Display and interface for safe, energy-efficient monitoring of fume cupboards, pressure zones

More information

ELECTRONIC HUMIDISTAT: H270

ELECTRONIC HUMIDISTAT: H270 ELECTRONIC HUMIDISTAT: H0 ONE OR TWO STAGES HUMIDITY SUPPLY OUTDOOR TEMPERATURE RESET DESCRIPTION The H0 series low voltage, microcomputerbased PI (proportional and integral) humidistats are designed for

More information

Smoke Fire Damper Interface (230V)

Smoke Fire Damper Interface (230V) Always READ this document BEFORE INSTALLATION. Please Retain for future reference. This product forms part of a life safety system. Failure to correctly store, handle, install and maintain the product

More information