Polytronix, Inc. 705 N. Plano Rd. PH: Richardson, TX FAX: POLYMAGIC TM Glass

Transcription

1 POLYMAGIC TM Glass DEVELOPMENT: Developed reliable formulations and process January 2005 Designed own equipment for production June 2005 Commercialized glass February 2006 Curved glass version June 2006 RGB full color version January 2008 Dot Matrix version January 2008 APPLICATIONS: Special patented technology to incorporate LEDs/light sources into glass to create distinctive patterns, images and logos. Excellent promotional tool. High performance, bright LEDs/light sources save energy. Special flat or curved glass LEDs to match your applications without any distracting wires. Lighting Bathrooms/Shower enclosures Clinic Conference Room Table/Bench/Furniture Hospital (Emergency, ICU, Operation Room) Hurricane Resistant Windows Inner Door/Shop Window Façade Shelf Skylight Cosmetic/Specialty Counter/Shop/Boutique Electronic Clock/Score Board Display 5

2 Technology PRINCIPLE: LED light sources are supplied with power without any distracting wires through a laminated glass capable of conducting electricity. Electrical power is supplied by hidden circuit boards in the base glass. The glass laminate satisfies the legal requirements for protective overhead glazing. Because no holes are drilled in the glass to establish electrical contact, POLYMAGIC TM LED Glass can also be used effectively for outdoor and curved applications. The power and signal transmission is executed via the transparent conductive coating of POLYMAGIC TM LED Glass. POLYMAGIC TM LED Glass can be operated with a readable flash controller, full-color or standard remote controller with a changeable message display, either statically or flashing. The lighting is controlled by the power supply driver. Additionally, POLYMAGIC TM LED Glass can be used various glass types, such as tempered, low-iron, printed, colored, mirror, sand-blasted, stained etc. 6

3 Polytronix, Inc. 705 N. Plano Rd. Richardson, TX PH: FAX: Manufacturing PRINCIPLE: Polytron Technologies is the only manufacturer of POLYMAGICTM LED Glass in Taiwan and have patents worldwide. POLYMAGICTM LED Glass is moisture-resistant, can be cut into any shape with holes anywhere on the glass, and can also be curved. POLYMAGICTM LED Laminated Glass 7

4 Technical Data GLASS TYPE: (All laminated) LED COLOR: THICKNESS: SIZE: SHAPE: Annealed, tempered, curved, low-iron, printed, colored, stained, sand-blasted White, Blue, Green, Red, Yellow-white (double side bright) 8 mm (3mm+3mm) to 40mm (19mm+19mm) Up to 63 x 150 (1,600 mm x 3,810 mm) Any shape, including holes anywhere ENVIRONMENTAL: Operation 20 C to 80 C ( 4 F to 186 F) ELECTRICAL: Driving voltage from 24 VDC or 48 VDC (depends on the design) Current depends on the design Power depends on the design SWITCHING TIME: less than 100 milliseconds OPTICAL: Transmission > 80% View angle approx. 160 UV protection 99% IR protection 40% or 80% (option) LIFE: Greater than 10 years (indoors) Claim is supported by manufacturer s testing data 8

5 Electrical Installation 1. WIRING 1. POLYMAGIC TM LED Glass requires all electrical installations be completed by a licensed electrician, and in compliance with all coding requirements. 2. Before installation, inspect busbars, electrode leads and wires to assure insulation. No exposed busbars, electrode leads, or wires should contact any metal frames that will damage transformer and POLYMAGIC TM LED Glass. Insulating tapes can be used to wrap exposed busbars, electrode leads, or wires which may be caused during glass lamination or shipping. 3. Before turning on the power, test resistance reading between the metal frame and electrode and make sure that the resistance reading is infinite. Otherwise, check short location and insulate electrodes from metal frames. 19

6 Polytronix, Inc. 705 N. Plano Rd. Richardson, TX PH: FAX: Partial Application List CEILING HOTEL LOBBY CEILING OFFICE ENCLOSURE CURVED GLASS ESCALATOR STORE DISPLAY SIGNAGE FURNITURE ELEVATOR POLYMAGICTM LED Laminated Glass Slotlaan GH Zeist The Netherlands Tel: Mob: