MSSD- microwave sensor, Factory Set standard 3 minute delay 50% step dimming. (additional options 20% / 50%, delay from 1 to 20 minutes)

Transcription

1 MSSD- microwave, Factory Set standard minute delay step dimming. (additional options % /, delay from to minutes) ing m FTR SeriesimMicrowave Motion Sensor (MSSD) D Microwave, factory set standard minute delay step dimming. (additional options % /, delay from to minutes) C US Introduction Automatic switching or dimming when used in combination The MSSD innovative and active motion detectors with HF with -V dimmable ED drivers or ballasts. system 5.GHz. Motion can be detected through plastic, Built-in. glass and thin non-metal materials. Introduction -V interface can match up with stand-alone Automatic switching dimming when used in combination with it DSOD andorachieve harvesting. Compact size makes -V dimmable ED drivers or ballasts. to fix within most luminaires. Detection area, time delay suitable Built-in. -V interface match up withcan stand-alone threshold be precisely set via DIP switch. andcan DSOD and achieve harvesting. Wide detection area, range up to 5ft in diameter. Support higher Compact size makes it suitable to fix within most luminaires. mounting height 5ft Max. Detection area, time delay and threshold can be precisely Optional surface mounting and base mounting set via DIP switch. Wide detection area, range up to 5ft in diameter. Support higher mounting height 5ft Max Optional surface mounting and base mounting The s allow energy saving without compromising The MSSD innovative and active motion detectors with HF system comfort. When used in combination with -V dimmable ED 5.GHz. Motion can be detected through plastic, glass and thin nondriversmaterials. or ballasts, they can achieve -step dimming function, metal which is perfect for use in some areas that requires a The allow energy savingswitch without lights change notice before totally off. compromising comfort. When used in combination with -V dimmable ED drivers or ballasts, they the -V interface in thefunction, MSSD canwhich matchisup with Fidelux Also,achieve can -step dimming perfect for use in some areas switch off. s t a n dthat - a l orequires ne daa y llight i g h t change s e n s o notice r D S Obefore D, a ntotally d implement harvesting, means the lighting system has automated Also, the -V interface in the MSSD can match up with Fidelux controls that either turn off or dim artificial light in response to stand-alone DSOD, and implement harvesting, the available system in the space. means the lighting has automated controls that either turn off or dim artificial light in response to the available in the space. As it uses the third generation technology, normal 5.GHz microwave module can be mounted as highnormal as 5ft with a As it uses the third generation technology, 5.GHz detectiona area up tocan 5ftbe in mounted diameter as high as 5ft with a microwave module detectiona area up to 5ft in diameter 5m Max.7ft Max.7ft ight Sensor ight Sensor info@fidelux.com 7 Fidelux ighting Ver...7 Hold Time s~min s~min Mounting Height Mounting 5ft Max. Height 5ft Max. SYC Cluster-control Cluster-control Version Version Automatic Automatic Dimming Dimming 5 Years 55 Years Years

2 Dimming Function -Step Dimming Function Dimming Function amps in corridor are controlled by several s. Once any motion is detected by one of s, the motion signal will be transmitted to other s connected -step together. dimming Then, function all lamps switch on at the same time, instead of switching on the lamps in the area where motion is detected. amps in corridor are controlled by several s. Once any motion is detected by one of s, the motion signal will be transmitted to other s connected together. Then, all lamps switch on at the same time, instead of switching on the lamps in the area where motion is detected..) o motion detected, all lamps switch off. o motion detected, all lamps switch off..) Any movement is detected from any direction, all lamps synchronously switch on. Any movement is detected from any direction, all lamps synchronously switch on..) o motion is detected in detection area, all lamps synchronously o motion dim isto detected a low light in level after hold time. detection area, all lamps synchronously dim to a low light level after hold time..) After stand-by period, the lamps switch off if no After stand-by period, the movement lamps is detected switch offin ifthe nodetection zone. movement is detected in the detection zone info@fidelux.com 7 Fidelux ighting Ver...7 5

3 O -OFF Function Motion MCV + ED driver or ballast (Any brand) MCV is an innovative motion, switch on the light on detection of movement, and switch off after a hold time when there is no motion detected. As built-in can read brightness value, the does not switch on the light if with sufficient natural light. On-Off Function Motion MCV + ED driver or ballast (Any brand) MCV is an innovative O motion -OFF, Function switch on the light on detection of movement, and switch off after a hold time when there is no motion detected. As built-in can read brightness value, the does not switch on the light if with sufficient natural light. Motion MCV + ED driver or ballast (Any brand) MCV is an innovative motion, switch on the light on detection of movement, and switch off after a hold time when there is no motion detected. As built-in can read brightness value, the does not switch on the light if with sufficient natural light. doesn't switch on. With insufficient ambient light, the switches on the lamp After hold time, the switches off the lamp when no motion is detected. doesn t switch on. doesn't switch on. With insufficient ambient light, After hold time, the the switches on the lamp switches off the lamp when With insufficient ambient light, After hold time, the switches offno themotion lamp when is detected. the switches on the lamp no motion is detected. Max. W Max. W Max. W When useddaylight in combination Harvesting with Merrytek MS, the system has automated controls that either When used in turn combination off or dim with artificial Merrytek light in response to the MS, available the system has automated in the space. controls that either turn off or dim artificial light in response to the available in the space. When used in combination with Merrytek MS, the system has automated controls that either turn off or dim artificial light in response to the available in the space. Ambient light larger than preset illumination Ambient light below than preset illumination Ambient light larger than Ambient light below than level Ambient light larger than Ambient light below than preset (Set illumination by -V level level, preset the illumination lamp switches level, preset illumination level preset illumination level, (Set by -V ), (Set the by -V on thewhen lampthe motion switches lamp switches is on on lamp ), keeps theoff. lamp ), keeps the lamp keeps detected. when motion is detected. off. off. The lamp lights on % illumination or dims to maintain the preset illumination level against the level of ambient light. The lamp lights on % illumination or dims to maintain the preset illumination The lamp lights on % illumination or dims to maintain the preset illumination level against the level of ambient light. level against the level of ambient light info@fidelux.com 7 Fidelux ighting Ver...7

4 (Continued) If with sufficient ambient light, the lamp turns off at once,even with motion trigger. If with insufficient ambient light, the lamp dims to stand-by dimming level (Set in the motion ) when no motion detected ofter hold time, and then switches off after stand-by period. If with sufficient If with ambient sufficient ambient If with insufficient ambient If with insufficient light, the lamp ambient dims to light, stand-by the lamp dimming dims level to stand-by (Set in the dimming motion light, the lamp turns off ) when no motion detected ofter hold time, and then switches off after stand-by period. light, the lamp turns off at level (Set in the motion ) when no motion detected ofter hold at once,even with motion trigger. once,even with motion trigger. time, and then switches off after stand-by period. Detection Detection Pattern Pattern Detection Pattern % % Detection Pattern % % 5% 5% % Wall mounting pattern (Unit: m) Suggested Suggested installation installation height: height: -.m -.m Suggested installation height: -.m Ceiling mounting Ceiling mounting pattern (Unit: pattern m) (Unit: m) Ceiling mounting pattern (Unit: m) Suggested installation height:.5-m Suggested Suggested installation installation height: height:.5-m.5-m 5% % info@fidelux.com 7 Fidelux ighting Ver Suggested installation height: -.m Ceiling mounting pattern (Unit: m) Suggested installation height:.5-m

5 Operating Voltage Rated Capacitive oad HF System Transmitting Power Power Consumption Detection Zone MCV -77Vac, 5Hz/Hz W; W; W 5.GHz ± 75MHz, ISM Wave Band <.5mW.5W(Standby), <W(Operation) Max. (DxH): mx5m Detection Sensitivity / / / % Daylight Sensor Stand-By Period 5s / s / 9s / min / min / + lux/5lux / lux / 5lux /5lux / lux / Disable s /5s / 5min / min / min / h / + Disable Stand-By Dimming evel / % / % / Mounting Height Motion Detection Detection Angle 5m Max..5-m/s 5 (Wall Installation); (Ceiling Installation) Operating Temperature -5 C - 7 C IP Rating By selecting the combination on the DIP switches, data can be precisely set for each specific application. O I O O % II O - III - O IV - - Detection area Detection area can be reduced by selecting the combination on the DIP switches to fit precisely each application. IP O O O O 5 I O O O 5S II - O O S III O - O 9S IV - - O min V O O - min VI I O O O S II - O O 5S III O - O 5min IV - - O min V O O - min VI - O - h VII Disable I - - O O ux II O 5ux III - O O - ux IV - - O - 5ux V - O - - 5ux VI O ux VII Disable I O O % II O - III - O IV - - Refers to the time period the lamp remains at % illumination after no motion detected. Stand-By Period Refers to the time period the lamp remains at a low light level before it completely switches off in the long absence of people. When set to + mode, the low light is maintained until motion is detected. Daylight Sensor The can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the will switch on the lamp when motion is detected regardless of ambient light level. 5lux, lux: twilight operation, lux, 5lux: darkness operation only. ote that is active only when lamp totally switches off. Stand-By Dimming evel The low light level you would like to have after the hold time in the long absence of people info@fidelux.com 7 Fidelux ighting Ver...7