Contents. EN :2012 (E) Issue 5 ( ) Page

Size: px
Start display at page:

Download "Contents. EN :2012 (E) Issue 5 ( ) Page"

Transcription

1 Contents Page Foreword Scope Normative references Terms and definitions Symbols and abbreviations Determination of inspection and testing requirements General Classification of piping Design review In process inspection and testing General Materials and formed pressure retaining parts General Verification of material Verification of formed pressure retaining parts Non-destructive testing of formed parts Destructive testing of formed parts Welding Review of welding documents Inspection before welding Testing and inspection during welding Inspection after welding Inspection of built up pipe ends Heat treatment Non-destructive testing of welds Application of NDT General Examination of weld quality by sample inspection Imperfections revealed by sample inspection Circumferential butt, branch, fillet and seal welds Extent of testing Dissimilar metal joints Transverse cracks Longitudinal welds Testing methods General Quality level Personnel qualification Selection of NDT methods and testing techniques Reports Weld repairs Final assessment and documentation General Final inspection General Visual inspection before the proof test Visual inspection after the proof test

2 9.2.4 Review of the manufacturing documents Proof test General Hydrostatic pressure test Pneumatic pressure test Other tests Documentation of the proof test Documentation Final documentation package Design and manufacturing documentation package Operating instructions Documentation for the purchaser Declaration Annex A (informative) Declaration of compliance with EN Annex Y (informative) History of EN Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/68/EU aimed to be covered Bibliography... 35a 3

3 Foreword This document (EN :2012) has been prepared by Technical Committee CEN/TC 267 Industrial piping and pipelines, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard EN for metallic industrial piping consists of eight interdependent and not dissociable Parts which are: Part 1: General; Part 2: Materials; Part 3: Design and calculation; Part 4: Fabrication and installation; Part 5: Inspection and testing; Part 6: Additional requirements for buried piping; CEN/TR , Guidance on the use of conformity assessment procedures; Part 8: Additional requirements for aluminium and aluminium alloy piping. Although these Parts may be obtained separately, it should be recognised that the Parts are inter-dependant. As such the manufacture of metallic industrial piping requires the application of all the relevant Parts in order for the requirements of the Standard to be satisfactorily fulfilled. This European Standard will be maintained by a Maintenance MHD working group whose scope of working is limited to corrections and interpretations related to EN The contact to submit queries can be found at (en13480@unm.fr). A form for submitting questions can be downloaded from the link to the MHD website. After subject experts have agreed an answer, the answer will be communicated to the questioner. Corrected pages will be given specific issue number and issued by CEN according to CEN Rules. Interpretation sheets will be posted on the website of the MHD. 4

4 This document supersedes EN :2002+A1:2011. This new edition incorporates the Amendments/the corrigenda which have been approved previously by CEN members, and the corrected pages up to Issue 17 without any further technical change. Annex Y provides details of significant technical changes between this European Standard and the previous edition. Amendments to this new edition may be issued from time to time and then used immediately as alternatives to rules contained herein. It is intended to deliver a new Issue of EN 13480:2012 each year, consolidating these Amendments and including other identified corrections. includes the corrected pages listed in Annex Y. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 5

5 1 Scope This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN :2012 to be performed on individual spools or piping systems, including supports, designed in accordance with EN :2012 and EN :2012 (if applicable), and fabricated and installed in accordance with EN : Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN :2012, Metallic industrial piping Part 1: General EN :2012, Metallic industrial piping Part 2: Materials EN :2012, Metallic industrial piping Part 3: Design and calculation EN :2012, Metallic industrial piping Part 4: Fabrication and installation EN :2012, Metallic industrial piping Part 6: Additional requirements for buried piping EN 14917:2009+A1:2012, Metal bellows expansion joints for pressure applications EN ISO 5817:2007, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006) EN ISO 9712:2012, Non-destructive testing Qualification and certification of NDT personnel (ISO 9712:2012) EN ISO 17635:2010, Non-destructive testing of welds General rules for metallic materials (ISO 17635:2010) EN ISO 17640:2010, Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment (ISO 17640:2010) 6

6 A.3 Declaration for compliance for piping with EN Figure A.3 provides a form for a declaration for compliance for piping with EN DECLARATION OF COMPLIANCE FOR PIPING WITH EN Description of piping Identification no./drawings no. manufactured by (company) for (plant/purchaser/purpose) Design conditions: PS [bar] TS max, TS min [ C] category DECLARATION OF DESIGN COMPLIANCE no. /by DECLARATION of COMPLIANCE for FABRICATION, INSTALLATION AND TESTING no./by We hereby declare that the above piping conforms with the requirements of EN 13480:.. Company Place and Date Signature Figure A.3 Declaration of compliance of final inspection for piping 33b

7 Annex Y (informative) History of EN Y.1 Differences between EN :2002 and EN :2012 The 2012 edition of EN contains the 2002 edition of the standard and all Amendment(s) and/or correction(s) issued in the meantime. Significant technical changes include: a) Normative references have been updated; b) Clause 6 "Design review" has been completely revised; c) in 8.1 the determination of the extent of NDT has been revised; d) in 8.1 requirements for category 0 have been added; e) in 8.1 requirements for NDT for piping in creep and fatigue service have been clarified; f) in 8.1 and in requirements for NDT for piping subject to pneumatic pressure testing have been added; g) in 8.4 quality levels have been specified depending on service conditions and test methods considering EN ISO 5817; h) in and selection of NDT methods and testing techniques have been specified based on EN ISO 17635; i) in requirements for pressure testing of piping operating in the creep range have been added; j) in an alternative method for pneumatic pressure testing has been added; k) Table has been revised; l) in Clause 10 the reference to CEN/TR regarding the declarations of compliance has been replaced by a reference to Annex A; m) a new Annex A has been added including new forms for the declaration of design compliance, declaration of compliance for piping fabrication, installation and testing and declaration of compliance for piping with EN 13480; n) Annex ZA has been aligned; o) the standard has been editorially revised. NOTE The changes referred include the significant technical changes but is not an exhaustive list of all modifications. Y.2 List of corrected pages of Issue 2 ( ) Pages 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 33a, 33b, 34, 35 and 35a. Y.3 List of corrected pages of Issue 3 ( ) Pages 5, 24, 34 and 35. Y.4 List of corrected pages of Issue 4 ( ) Pages 5, 17, 27 and 34. Y.5 List of corrected pages of Pages 3, 5, 34, 35 and 35a. 34

8 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/68/EU aimed to be covered This European Standard has been prepared under a Commission s standardization request M/071 "Mandate to CEN for standardization in the field of Pressure equipment" to provide one voluntary means of conforming to Essential Requirements of the New Approach Pressure Equipment Directive 2014/68/EU. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations Table ZA.1 Correspondence between this European Standard and Directive 2014/68/EU on Pressure Equipment Essential Safety Requirements (ERs) of Directive 2014/68/EU on Pressure Equipment, Annex I Clause(s)/sub-clause(s) of this EN Qualifying remarks/notes Manufacturing procedures Preparation of component parts Personnel for non-destructive tests Non-destructive testing Final inspection Proof test 3.4 a) and b) and Table Operating instruction and documentation WARNING 1 Presumption of conformity stays valid only as long as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this standard. 35

9 Bibliography Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment EN (all parts), Welded steel tubes for pressure purposes Technical delivery conditions CEN/TR , Metallic industrial piping Part 7: Guidance on the use of conformity assessment procedures CEN ISO/TR 15608, Welding Guidelines for a metallic materials grouping system (ISO/TR 15608) 35a

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

NF EN V2/AC2 DÉCEMBRE Normes en ligne. Pour : CERN. Client : Commande : N T. le : 10/04/2018 à 17:39

NF EN V2/AC2 DÉCEMBRE Normes en ligne. Pour : CERN. Client : Commande : N T. le : 10/04/2018 à 17:39 NF EN 13445-5 V2/AC2 DÉCEMBRE 2016 Ce document est à usage exclusif et non collectif des clients Normes en ligne. Toute mise en réseau, reproduction et rediffusion, sous quelque forme que ce soit, même

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

Qualification testing of welders - Fusion welding - Part 1: Steels (ISO :2012 including Cor 1:2012)

Qualification testing of welders - Fusion welding - Part 1: Steels (ISO :2012 including Cor 1:2012) Irish Standard I.S. EN ISO 9606-1:2013 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012) CEN 2013 No copying without NSAI permission except as permitted

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

Biological evaluation of medical devices

Biological evaluation of medical devices BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and

More information

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af

More information

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 54-32 July 2015 ICS 13.220.20; 13.320 English Version Fire detection and fire alarm systems - Part 32: Planning, design,

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

Irish Standard I.S. EN :2009

Irish Standard I.S. EN :2009 Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

Plastic containers for intravenous injections (ISO 15747:2010)

Plastic containers for intravenous injections (ISO 15747:2010) Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention

More information

Bitumen and bituminous binders - Specifications for paving grade bitumens

Bitumen and bituminous binders - Specifications for paving grade bitumens Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16629 July 2014 ICS 91.140.99 English Version Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17221 April 2018 ICS 91.140.70 English Version Guidance on the application of CE marking and preparation of Declaration of Performance for

More information

Gas meters - Additional functionalities

Gas meters - Additional functionalities Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 12977-1 April 2010 ICS 27.160 Supersedes ENV 12977-1:2001 English Version Thermal solar systems and components - Custom built

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions Thermal spraying - Components with thermally sprayed coatings - Technical supply

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16422 October 2012 ICS 59.080.30 English Version Classification of thermoregulatory properties Classement des propriétés de thermorégulation

More information

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1051-2:2007 Ehitusklaas. Klaasplokid ja klaasist sillutiskivid. Osa 2: Vastavushindamine Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/product

More information

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards CEN 2015 No copying without NSAI permission except

More information

ILNAS-EN 1845:2007. Footwear manufacturing machines - Footwear moulding machines - Safety requirements

ILNAS-EN 1845:2007. Footwear manufacturing machines - Footwear moulding machines - Safety requirements Footwear manufacturing machines - Footwear moulding machines - Safety requirements Machines pour la fabrication de chaussures - Machines de moulage pour chaussures - Prescriptions de sécurité Maschinen

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12899-2:2007 Vertikaalsed püsiliikluskorraldusvahendid. Osa 2: Seest valgustatavad piirdetulbad Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

EN ISO ÖNORM. Edition: (ISO 14937:2009)

EN ISO ÖNORM. Edition: (ISO 14937:2009) ÖNORM EN ISO 14937 Edition: 2010-03-15 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization

More information

ILNAS-EN 62560:2012/A1:2015

ILNAS-EN 62560:2012/A1:2015 ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

Irish Standard I.S. EN :2011

Irish Standard I.S. EN :2011 Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying

More information

Personal protective equipment - Safety footwear (ISO 20345:2011)

Personal protective equipment - Safety footwear (ISO 20345:2011) Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

English Version. Daylight of buildings

English Version. Daylight of buildings EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European

More information

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions) TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure

More information

Sýnishorn General requirements for components used in drains and sewers

Sýnishorn General requirements for components used in drains and sewers ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN

More information

National foreword. Compliance with a British Standard cannot confer immunity from legal obligations.

National foreword. Compliance with a British Standard cannot confer immunity from legal obligations. BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 15500-1:2017. It supersedes BS EN 15500:2008, which is withdrawn. The UK participation in its preparation was entrusted

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-18 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 54-18:2006 Fire detection and fire alarm systems - Part 18: Input/output devices Fire detection and fire alarm systems - Part 18: Input/output devices EESTI STANDARDIKESKUS EESTI

More information

ICS Supersedes CLC/TS 62046:2005. English version

ICS Supersedes CLC/TS 62046:2005. English version TECHNICAL SPECIFICATION CLC/TS 62046 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION May 2008 ICS 13.110 Supersedes CLC/TS 62046:2005 English version Safety of machinery - Application of protective equipment

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15378-2 April 2017 ICS 91.140.10; 91.120.10 English Version Energy performance of buildings - Heating systems and DHW in buildings - Part 2:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15417:2006 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kw but not exceeding 1000 kw Gas-fired central

More information

Irish Standard I.S. EN ISO :2013

Irish Standard I.S. EN ISO :2013 Irish Standard I.S. EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity

More information

Operation of electrical installations -- Part 1: General requirements

Operation of electrical installations -- Part 1: General requirements Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14420-4:2005+A1:2007 Hose fittings with clamp units - Part 4: Flange connections Hose fittings with clamp units - Part 4: Flange connections EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10163-1:2005 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements Delivery requirements for surface condition

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16637-1 August 2014 ICS 19.040; 13.040.20; 91.100.01 English Version Construction products - Assessment of release of dangerous

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10993-12:2009 Meditsiiniseadmete bioloogiline hindamine. Osa 12: Proovieksemplari ettevalmistamine ja etalonained Biological evaluation of medical devices - Part 12: Sample preparation

More information

Hot rolled flat products made of high yield strength steels for cold forming

Hot rolled flat products made of high yield strength steels for cold forming ÖNORM EN 10149-2 Edition: 2013-11-01 Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels Warmgewalzte

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005. IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1369:2012 Metallivalu. Magnetosakeste kontroll Founding - Magnetic particle testing EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 1369:2012 sisaldab Euroopa

More information

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components ÍST EN 45545-2:2013 Fellur úr gildi 30.8.2013 ICS: 13.22 Búnaður til notkunar við járnbrautir - Eldvarnir í járnbrautarvögnum - Hluti 2: Kröfur varðandi hegðun efna og íhluta í eldi Railway applications

More information

Explosiv atmosfär Trycktålig utrustning. Explosion resistant equipment

Explosiv atmosfär Trycktålig utrustning. Explosion resistant equipment SVENSK STANDARD SS-EN 14460:2006 Fastställd 2006-05-23 Utgåva 1 Explosiv atmosfär Trycktålig utrustning Explosion resistant equipment ICS 13.230 Språk: engelska Publicerad: juni 2006 Copyright SIS. Reproduction

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT CLC/TR 62125 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2008 ICS 13.020.01; 29.060.20 English version Environmental statement specific to TC 20 - Electric cables (IEC/TR 62125:2007) Déclaration

More information

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines Irish Standard I.S. EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines CEN 2013 No copying without NSAI permission except as permitted

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12953-4:2002 Trummelkatlad. Osa 4: Katla survedetailide väljatöötamisviis ja valmistamine Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference

More information