VPS3 Installation Manual

Size: px
Start display at page:

Download "VPS3 Installation Manual"

Transcription

1 VPS3 Installation Manual VPS3 Viewer (Local Unit) VPS3 Sender (Remote Unit) Content Introduction...2 Features...2 Packing Checklist...2 Patents...2 Limited Warranty...2 Overall Certificate...3 System Specification...3 Specification of VPS3 Sender...4 Specification of VPS3 Viewer...4 Description of INPUT side of Sender unit (Remote Unit)...5 Description of LINK-OUT side of Sender unit (Remote Unit)...6 Description of LINK-IN side of Viewer unit (Local Unit)...7 Description of OUTPUT side of Viewer unit (Local Unit)...8 Further Description of VPS3 series...9 Connection Diagram...10 Connecting Sender unit...11 Connecting Viewer unit...12 Installation of Remote Unit and Local Unit...13 Removing the Mounting Brackets...14

2 Introduction VPS3 series is a transmission system to transmit video, audio, RS-485 data, alarm signals, and camera DC power via one coaxial cable. The system can transmit signals and DC power to 600 meters. If a camera has its power source, not consuming power from Viewer unit, the transmission distance of the VPS3 can reach 1,000 meters. Features & One cable transmits all signals and DC power. & Supports P/T/Z (pan, tile, zoom) Camera. & Up to 600 meters range with DC power; up to 1,000 meters range if camera consumes extra separate power source at camera installation side. & Supports RS-485 standard from DC (0bps) to 38.4 Kbps & Half-duplex channel for RS-485 port & Real time analog video signals for color and B/W (50 fps /60 fps), 480 TV lines resolution. & Built-in electrical transient voltage suppressor(tvs) and gas tube arrester protection on LINK IN and LINK OUT ends. & Inter-Carrier technology eliminates signal interference and common mode noise. & Power Supply accepts universal voltage input from 85V to 265V. Packing Checklist Carefully unpack VPS3 packing box and check that the following items are included: & VPS3 Sender (Remote Unit) & VPS3 Viewer (Local Unit) & Power supply (AC to DC power adapter) and power cord & Four mounting brackets and four screws & Two 120 ohms terminators for RS485 daisy chain. One for Remote unit and the other for RS485 Network in Local side. & One 1,000 ohms terminator for Terminator Mode use in Alarm Input side. & Installation Manual Contact your dealer immediately if any of the above items appears damaged or the unit does not work. Patents Patents covering the design, operation, techniques, and unique features of the Single-Cable transmission device of a surveillance system include: U.S. Patent #US 6,369,699 B1 April 9, 2002; Taiwan Patent # September ; Europe Patent #EP A1 September 19, Other Patents are pending. Limited Warranty We grant a warranty for this product for 18 months. Please offer the purchase date and the serial Number of Bar-Code on the back of the product to your distributor or retailer as proof for this purpose. During the warranty period, in case of defected in material or workmanship, the defective unit will be repaired or replaced according to our manufacturer's assessment. However, this warranty does not cover damages caused by improper use or from unauthorized modifications by third parties

3 Overall Certificate This equipment has been tested and found to comply with the Part 15 rules of the US FCC Regulation, also gets CE approved and comply with European Directive 2002/95/EC - Restriction of Hazardous Substance (RoHS) System Specification The ambient operating temperature is from -10 to +45, and the relative humidity is from 10% to 70%. Besides, the ambient storage temperature is from -25 to +75 and the relative humidity is from 0% to 95%. Please be kindly informed that allowable maximum DC Resistance of coaxial cable between Sender unit and Viewer unit varies to some extent according to different current and voltage consumption of camera. Please see below table for more info. Camera Power Consumption Voltage Current Maximum DC Resistance allowable 12V 1Amp 20 ohms 12V 1.25Amp 15 ohms 24V 0.6Amp 18 ohms 24V 0.75Amp 12.5 ohms However, if camera has its own power source, consumes no power from Sender unit, the maximum DC Resistance allowable is 35 ohm. Note: DC Resistance here means total DC Resistance of both inner conductor resistance and outer conductor resistance of the coaxial cable between Sender unit and Viewer unit. In general, the thicker the coaxial cable is, the lower the DC Resistance is; and the longer the coaxial cable is, the higher the DC Resistance is. Both DC12V, 1Amp and DC24V, 0.6Amp is VPS3 series' default values

4 Specification of VPS3 Sender To ensure smooth operation of VPS3, the following minimum system and setup requirements should be met. Electrical: Video Input Signal: 1.0Vpp, 75 ohms Bandwidth of Video Signal: 5.5MHz typ Audio input Signal: 3.0Vpp, max 100K ohms/ Internal Impedance,. Alarm Input type: N.C./N.O./Terminal 1,000 ohms Power Output: DC12V, 1.0 A, max. RS-485 Data Rate: DC(0bps) to 38.4Kbps Connection: (PTB= Plugable Terminal Block) Video Input: BNC Socket Audio Input: BNC Socket/RCA Phono Socket Optional DC and Alarm: 4 Pin PTB, 3.5mm Pitch RS-485 Port: 3 Pin PTB, 3.5mm Pitch Link Out: BNC Socket Specification of VPS3 Viewer To ensure smooth operation of VPS3, the following minimum system and setup requirements should be met. Electrical: Video Output Signal: 1.0Vpp, 75 ohms Bandwidth of Video Signal: 5.5MHz typ S/N ratio of Video Signal: 50dB typ Gain of Audio signal Output: 0dB ±3dB, 600 ohms / internal impedance Bandwidth of Audio Signal: 50Hz to 10KHz ±3dB S/N Ratio of Audio Signal: 46dB under 1.0Vpp input at RU Alarm Output: N.C./N.O., Contact Rating 1A, 30VDC Dry contact DC Power Input: 40V Max. DC power Output: 38V, 1.4A, min. Link Fault Output for external indicators: 0.15A, min. RS-485 Data Rate: DC(0bps) to 38.4Kbps Connection: (PTB= Plugable Terminal Block) Link In: BNC Socket Link Fault: 3 Pin PTB, 3.5mm Pitch DC Power Input: 2 Pin PTB, 5.0mm Pitch Video Output: BNC Socket Audio Output: BNC Socket/RCA Phono Socket Optional Alarm Output: 3 Pin PTB, 3.5mm Pitch RS-485 Port: 3 Pin PTB, 3.5mm Pitch(2 Set) - 4 -

5 Video Signal Input Alarm Sensor In DC 12V Out RS485 Port A B COM INPUT Audio Signal Input INPUT VIDEO IN (DC OUT 1.0Amp Max.) ALARM DC OUT IN GND +12V GND RS485 A B COM AUDIO IN INPUT Fig 2. Detail of panel < INPUT > Description of INPUT panel: VIDEO IN: To receive a video signal from video source, eg. P/T/Z cameras. ALARM IN: To receive alarm connection from devices like sensors or infra-red detective devices. Both N.O. and N.C. are acceptable, even at the same time. Please refer to Further Description of P.10 for more details. DC OUT: To send DC power to a camera. RS485: To receive and to send RS485 data to RS485 port at camera. AUDIO IN: To receive an audio signal from an audio source, eg. a microphone

6 Link Out Coaxial Cable 0 to 1,000Meters LINK OUT Power Status Alarm Input Type Selector LINK OUT ALARM R- Standby LINK OUT with DC IN G- Operation Y- DC Power Low Flash- Power Fail N.C. TERM N.O. INPUT TYPE LINK-OUT POWER STATUS (DC +40V Input Max.) Description of LINK-OUT panel: LINK OUT with DC IN: to send out the video, audio, alarm and RS485 data to the Viewer unit and to receive DC power and RS485 data in from the Viewer unit. POWER STATUS: to indicate the power supply condition. Please refer to P.10 for more details. INPUT TYPE Fig 3. Detail of panel < LINK OUT > LED (ALARM): to indicate the Alarm Input and Alarm Output are both well working. If alarm switch, connected with INPUT of Sender unit, is activated, ALARM LED will light red. Switch (INPUT TYPE): to allow users to select alarm connection type: N.C., N.O. or TERM (mixture with N.O. and N.C.) For more info. about Alarm function, please refer to How to Use Alarm Manual enclosed inside packing box

7 Coaxial Cable 0 to 1,000Meters Link In External Indicator LINK FAULT +12V Override OUT POWER / LINK ON/OFF LINK IN LINK IN DC IN LINK IN with DC OUT LINK FAULT +12V Override OUT R- Standby G- Operation Y- Link Initial Flash- Link Fault ON/OFF DC POWER IN +40V 0V (DC +38V) POWER / LINK LINK-IN Fig 4. Detail of panel < LINK IN > Description of LINK-IN panel: LINK IN with DC OUT: To receive in the video, audio, alarm and RS485 data from the Sender unit and to send DC power and RS485 data out to the Sender unit. LINK FAULT: This function tells users whether cable link is connected or not. There are four ways how LINK FAULT message works for users to select. Please refer to Further Description of P.10 for more details. POWER / LINK (system status led): When users turn off the system, the LED will be red. When users turn on the system, the LED will be yellow at the first 5 seconds for initial, and then become green. The LED will keep green when the system is on. When the system is under LINK FAULT situation as described above, the LED will be yellow flash. The yellow flash can be stopped only after the disconnected situation is solved. ON/OFF: To turn on or turn off the system. DC POWER IN: To input the power from the power supply

8 Alarm Indicator Video Signal Output A B COM OUTPUT N.C. C N.O. Alarm Signal Output RS485 Network (Daisy Chain) Audio Signal Output OUTPUT A B AUDIO OUT RS485(In/Out) A B COM (ALARM Rating 1A, 30VDC) RS485(In/Out) ALARM OUT A B COM N.C. C N.O. VIDEO OUT ALARM OUTPUT Description of OUTPUT panel: Fig 5. Detail of panel < OUTPUT > VIDEO OUT: to send the video signal out to a device, e.g. A monitor or DVR ALARM OUT: to send the alarm connection out for a further application. If alarm switch near camera side is activated, the ALARM LED will light red. RS485 (In/Out): There are two RS485 connections in this panel in order to link the previous RS485 device, or the next RS485 device in a Daisy Chain way. To receive RS485 data from the server (ex a control keyboard), to send RS485 data to a P/T/Z camera, and to pass RS485 data between RS485 devices. Normally people in the industrial field pronounce to use only 2 twisted pair cables to connect with RS485 connection; however, here we strongly request users to connect COM port of RS485 connection with P/T/Z Control Keyboard because most P/T/Z Control Keyboards use completely isolated (floating) power adaptor as its power supply. AUDIO OUT: to send out the audio signal to a device, e.g. monitor or speaker. The audio signal level output from the AUDIO OUT is exactly the same as what the AUDIO IN received at Sender Unit at Sender Unit

9 Further Description of VPS3 series Use of Alarm input type: This function allows users to set alarm switch in the camera side. When alarm switch, connected with INPUT side of Sender unit, is activated, ALARM led of LINK-OUT side of Sender unit and OUTPUT side of Viewer unit will light red, and the alarm signal will be simultaneously sent to the Viewer unit for further application. If the alarm switch is N.O. mode, users must select N.O. type in the LINK-OUT side of the Sender unit. Also if the alarm switch is N.C. mode, users must select N.C. type in the LINK-OUT side. Users can connect a buzzer or other alarm indicators with ALARM OUT of OUTPUT side for further application. For more details of this alarm function, please refer to document "How To Use Alarm" attached inside packing box. Introduction of POWER STATUS of LINK-OUT side of Sender unit When the LED is red, it implies power supply to camera is stand-by or not used. When the LED is green, it means power is loaded well to the camera. When the LED is Yellow, it means DC power is low. Please check if the cable used is over length limitation or the camera consumes over 1.0Amp. When the LED is flashing, it implies the power supply might fail due to the power is too low to offer any function Functions of LINK FAULT: This function tells users whether cable link is connected or not. There are four ways how LINK FAULT message works for users to select. 1.The Viewer unit sounds (a siren inside) while cable disconnected. Users can turn off and then turn on the power switch to shut off the siren, but LED will still flash yellow until cable connected. 2. If users do not want Viewer to sound while cable disconnected, they can bridge +12V and Override by a wire to hide the siren. But LED will still flash yellow until cable is connected again. 3. LINK FAULT message can be sent out to external indicators like a bulb, a buzzer, a relay or a meter if they are connected with both +12V and OUT of LINK-IN side with 2 copper wires or 2 twisted pair cables. 4. Users can also regard the LINK FAULT message as an Alarm signal and send this signal out of the Viewer for further application. In this case, please bridge both Override and OUT in LINK-IN side with a wire and connect ALARM OUT of OUTPUT side of the Viewer to Surveillance System in the Control Room. While cable disconnected, Alarm signal (LINK FAULT message) will be sent out of the ALARM OUT to the Surveillance System and ALARM LED in the OUTPUT side will also flash red at the same time

10 Connection Diagram The following illustration gives an overview of the Sender unit and the Viewer unit connections. Please note always use a coaxial cable to connect to the LINK OUT side of the Sender unit. Video Signal Input Video Signal Output A B RS485 Network (Daisy Chain) N.C. C N.O. Alarm Signal Output Audio Signal Output A B DC 12V Out Alarm Sensor In LINK OUT INPUT Sender NTSC/PAL from CCD Camera A B COM RS485 Port Video and Audio Signals, Alarm Function with RS485 Port Transmission Set (Remote Unit) Audio Signal Input Link Out Power Status Alarm Input Type Selector Coaxial Cable 0 to 1,000Meters use 5C-2V COM DC Power to P/T/Z Camera Video, Audio, Alarm Signal and RS485 Alarm Signal Indicator Link In to LINK FAULT Warning Indicator OUTPUT +12V Override OUT LINK IN POWER / LINK Viewer NTSC/PAL to Monitor ON/OFF Video and Audio Signals, Alarm Function with RS485 Port Transmission Set (Local Unit) DC Power Supply DC IN Fig 6. System Connection of VPS3 Series

11 Connecting Sender unit The following illustration shows the connections for the Sender unit: INPUT Connection Connect the video signal from the video source, e.g. a P/T/Z camera, to VIDEO IN in the INPUT side. Connect a wire to the N.O./N.C. connection from sensors to the PTB connector ALARM IN in the INPUT side. Please refer to How to Use Alarm manual to improve safety and flexibility of alarm connection. Connect the power cord (DC 12V) from the DC OUT in the INPUT side to the video source, e.g. a P/T/Z camera. Connect a twist pair cord with RS-485 data from a RS485 device to the RS485 Port. Adding the 120 ohms terminator between A and B. Connect the audio signal from the audio source to the AUDIO IN of the INPUT side. Please use a connector adapter if the connector used is not BNC female type. LINK-OUT Connection Connect the LINK OUT of Sender with one end of a coaxial cable. Installation Notice: When setting up the VPS3 Sender unit and Viewer unit, be sure to note the following points: Both units should be fixed securely to a permanent object such as a wall or a pillar. Avoid locations with extreme vibrations or dust. Avoid locations with dampness or extreme heat. Adding one terminator at one end of RS485 Network with daisy chain is strongly recommended

12 Connecting Viewer unit The following illustration shows the connections for the Viewer unit: LINK-IN Connection Connect Link In of Viewer with one end of the coaxial cable, which is connected on the other end with Link Out of Sender. Please refer to Further Description of P.10 for LINK FAULT connection. Plug the power cord on and connect the AC power adapter to the DC POWER IN connector in the LINK IN side. OUTPUT Connection Connect VIDEO OUT with a video device, e.g. a monitor. Link the N.C. N.O. connection from the ALARM OUT with other further application or devices in Control Room. RS-485 port Users can connect at least 32 RS-485 devices with Viewer units in daisy chain. Connect with two RS485 devices with two PTB connectors separately by using twisted pair cables and ground wires. And adding one terminator at the end of RS485 daisy chain connection is required. Adding a 120 ohms terminator between A and B wires. It depends which port is the end of the daisy chain or not. Connect an audio device, e.g. a speaker, with audio signal from AUDIO OUT in the OUTPUT side. Please use a connector adapter if the connector used is not BNC female type

13 Installation of Remote and Local Units The VPS3 units can both be fixed to a wall or desktop with the supplied mounting brackets. The mounting brackets can be fixed onto the rear, top, or bottom of either unit. Attaching the Mounting Brackets Attach the mounting brackets to either the Sender unit or the viewer unit as shown below: 1. Align the mounting bracket with the mounting track on the rear of the unit as shown here: Mounting Tracks 2. Slide the bracket in the direction of the arrow until the white nub clicks into place as shown below: Nut 3. Repeat the above steps on another side of the unit to attach the second bracket. 4. Fix the unit in the desired location with two screws

14 Removing the Mounting Brackets Remove the mounting as shown below: 1. Use a flat-tipped screwdriver to lift the white nut as shown below: Nut 2. While lifting the nut, slide the bracket out in the direction of the arrow as shown below: 3. Repeat the above steps to remove the second bracket. Distributor/Retailer Copyright (c) 2012, All Rights Reserved. Made in Taiwan

VDS2510 Installation Manual

VDS2510 Installation Manual Video Signal Output No. 1 C N.C Output VDS2510 Installation Manual C N.C Output Viewer 2510-L (Local Unit) Video Signal Output OUTPUT Connections There are two VIDEO OUT connectors. Please connect each

More information

Colour Observation System

Colour Observation System FAR < > NEAR Colour Observation system talk action menu _ + auto next FAR < > NEAR Colour Observation Monitor Colour Observation Monitor English Colour Observation System Table of contents Page Introduction...3

More information

IR Intelligent Speed Dome Installation Manual

IR Intelligent Speed Dome Installation Manual IR Intelligent Speed Dome Installation Manual Version 1.0.0 Table of Contents 1 INSTALLATION PREPARATION... 1 1.1 Basic Requirement... 1 1.2 Installation Check... 1 1.3 Cable Preparation... 1 1.3.1 The

More information

IR Intelligent Positioning System Installation Manual

IR Intelligent Positioning System Installation Manual IR Intelligent Positioning System Installation Manual Version 1.0.0 Table of Contents 1 INSTALLATION PREPARATION... 1 1.1 Basic Requirement... 1 1.2 Installation Check... 1 1.3 Cable Preparation... 1 1.3.1

More information

Intelligent Speed Dome Installation Manual. Version 1.0.0

Intelligent Speed Dome Installation Manual. Version 1.0.0 Intelligent Speed Dome Installation Manual Version 1.0.0 Table of Contents 1 INTELLIGENT SPEED DOME INSTALLATION... 1 1.1 Installation Environments... 1 1.2 Check installation space and installation location

More information

High Speed Positioning System Installation Manual

High Speed Positioning System Installation Manual High Speed Positioning System Installation Manual Version 1.0.0 Table of Contents 1 INSTALLATION PREPARATION... 1 1.1 Basic Requirement... 1 1.2 Installation Check... 1 1.3 Cable Preparation... 1 1.3.1

More information

5 Inch Speed Dome Installation Manual V2.0.0

5 Inch Speed Dome Installation Manual V2.0.0 5 Inch Speed Dome Installation Manual V2.0.0 2010-01 1 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to

More information

HDCVI PTZ Camera. 6C Series. Quick Start Guide Version Dahua Technology USA Inc.

HDCVI PTZ Camera. 6C Series. Quick Start Guide Version Dahua Technology USA Inc. HDCVI PTZ Camera 6C Series Quick Start Guide Version 001.002 Dahua Technology USA Inc. Table of Contents 1 Welcome... 1 1.1 Important Safeguards and Warnings... 1 Electrical safety... 1 Environmental Precautions...

More information

MODEL 8144-RD CLOCK SELECTOR/DISTRIBUTION AMPLIFIER INSTRUCTION MANUAL. SPECTRACOM CORPORATION 95 Methodist Hill Drive, Suite 500 Rochester, NY 14623

MODEL 8144-RD CLOCK SELECTOR/DISTRIBUTION AMPLIFIER INSTRUCTION MANUAL. SPECTRACOM CORPORATION 95 Methodist Hill Drive, Suite 500 Rochester, NY 14623 MODEL 8144-RD CLOCK SELECTOR/DISTRIBUTION AMPLIFIER INSTRUCTION MANUAL SPECTRACOM CORPORATION 95 Methodist Hill Drive, Suite 500 Rochester, NY 14623 PHONE 585-321-5800 FAX 585-321-5218 REVISIONS, IF ANY,

More information

4 MP HDCVI PTZ In-ceiling Camera

4 MP HDCVI PTZ In-ceiling Camera 4 MP HDCVI PTZ In-ceiling Camera 52C430IC Quick Start Guide Version 001.001 Dahua Technology USA Inc. Table of Contents 1 Welcome... 1 1.1 Important Safeguards and Warnings... 1 Electrical safety... 1

More information

KRAMER ELECTRONICS LTD. USER MANUAL MODEL: SPK-CCF848 ESD Complete K-overage Ceiling Speaker. P/N: Rev 4

KRAMER ELECTRONICS LTD. USER MANUAL MODEL: SPK-CCF848 ESD Complete K-overage Ceiling Speaker. P/N: Rev 4 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: SPK-CCF848 ESD Complete K-overage Ceiling Speaker P/N: 2900-000735 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3

More information

6 Inch Speed Dome Installation Manual V2.0.0

6 Inch Speed Dome Installation Manual V2.0.0 6 Inch Speed Dome Installation Manual V2.0.0 2010-01 1 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to

More information

Printed on recycled paper Copyright reserved Subject to modification Colour Observation Quad

Printed on recycled paper Copyright reserved Subject to modification Colour Observation Quad Printed on recycled paper Copyright reserved Subject to modification 3122 165 21323 Colour Observation Quad Important notes for users in the U.K. Warning: to prevent fire or shock hazard, do not expose

More information

EverPlex 8BQ USER'S MANUAL. Real time B/W quad processor. Selectable single or dual quad display. High resolution picture quality

EverPlex 8BQ USER'S MANUAL. Real time B/W quad processor. Selectable single or dual quad display. High resolution picture quality EverPlex 8BQ USER'S MANUAL Real time B/W quad processor Selectable single or dual quad display High resolution picture quality 8 Alarm input with buzzer Table of Content Notice... 1 Safety Warning... 2

More information

USER MANUAL FOR OPERATING SYSTEM

USER MANUAL FOR OPERATING SYSTEM P2262 ALARM PANEL USER MANUAL FOR OPERATING SYSTEM 21765-07 September 1999 Associated Controls (Aust) PTY. LTD. 29 Smith Street, Hillsdale, NSW, 2036. PH (02) 9311 3255, FAX (02) 9311 3779 Page 1 of 177

More information

ADDENDUM. xwatch Explosion-Proof Camera with X-Series Flame Detectors DESCRIPTION GENERAL APPLICATION INFORMATION

ADDENDUM. xwatch Explosion-Proof Camera with X-Series Flame Detectors DESCRIPTION GENERAL APPLICATION INFORMATION ADDENDUM xwatch Explosion-Proof Camera with X-Series Flame Detectors DESCRIPTION The xwatch Explosion-Proof Camera is available as a factory installed option with any of the Det Tronics X Series line of

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS The SensorNet I/O Module provides attachment for up to 32 alarms and up to 16 switched devices. An RS-232 or RS-422 communications port is also provided for receiving serial alarms.

More information

HDCVI PIR Camera User s Manual

HDCVI PIR Camera User s Manual HDCVI PIR Camera User s Manual Version 1.0.1 Table of Contents 1 General Introduction... 1 1.1 Overview... 1 1.2 Features... 1 2 Device Framework... 2 3 Detection Range... 4 4 Device Installation... 5

More information

DIVA8MG2. Compact PAVA System Master Unit. DIVA8 System

DIVA8MG2. Compact PAVA System Master Unit. DIVA8 System DIVA8MG2 Public Address - Voice Alarm Audio Distribution over IP Commercial Audio Intelligent Acoustic Solutions Intercommunication Loudspeakers Compact PAVA System Master Unit DIVA8 System DIVA8 system

More information

HDCVI PTZ Network Camera

HDCVI PTZ Network Camera HDCVI PTZ Network Camera 59 Series Quick Start Guide Version 001.002 Dahua Technology USA Inc. Table of Contents 1 Welcome... 1 1.1 Important Safeguards and Warnings... 1 Electrical safety... 1 Environmental

More information

DESCRIPTION INSTALLATION

DESCRIPTION INSTALLATION DESCRIPTION The Model 10A11 Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of

More information

USER'S MANUAL. Real Time Color Quad Processor. High Resolution, Broadcast Quality. Playback Zoom Function. RS232 Remote Control

USER'S MANUAL. Real Time Color Quad Processor. High Resolution, Broadcast Quality. Playback Zoom Function. RS232 Remote Control EverPlex 4CQ USER'S MANUAL EverPlex 4CQ + Freeze Seq NEXT P. DEFAULT Set Real Time Color Quad Processor High Resolution, Broadcast Quality Playback Zoom Function RS232 Remote Control Connect Up To 4 Cameras

More information

Instruction Manual Model L2 RF Switch

Instruction Manual Model L2 RF Switch Instruction Manual Model 1582-22L2 RF Switch November 2015, Rev. A CH1 AUTO CH2 SWITCH 1 2 1 2 STATUS 1 2 MODEL 1582 SWITCH CROSS TECHNOLOGIES INC. CH1 ONLINE MANUAL SELECT CH2 SWITCH MANUAL REMOTE ONLINE

More information

VQCM4 Colour Quad Installation & Instruction Manual

VQCM4 Colour Quad Installation & Instruction Manual Thank you for purchasing our product. Please read this User s Manual before using the product. Change without Notice. VQCM4 Colour Quad Installation & Instruction Manual Table of Contents Safety Precautions...3

More information

English. FCC declaration. Electro Magnetic Compatibility (EMC) Warning. This device complies with part 15 of the FCC rules.

English. FCC declaration. Electro Magnetic Compatibility (EMC) Warning. This device complies with part 15 of the FCC rules. English FCC declaration Warning: To prevent fire or shock hazard, do not expose camera or monitor to rain or moisture. The lightning flash with arrowhead symbol, within a triangle, is intended to alert

More information

STATUS ALARM ALARM HISTORY POWER HISTORY RESET

STATUS ALARM ALARM HISTORY POWER HISTORY RESET Instruction Manual Model 1582-70L2 RF Switch June 2011, Rev. D CH1 AUTO CH2 SWITCH 1 2 1 2 STATUS 1 2 MODEL 1582 SWITCH CROSS TECHNOLOGIES INC. CH1 ONLINE MANUAL SELECT CH2 SWITCH MANUAL REMOTE ONLINE

More information

VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM

VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM Integrated Voice Evacuation System VM-3000 series Emergency Voice Alarm System Incorporating Digital Audio PA, Paging and BGM High-quality, compact public

More information

Pipo Communications. Model ST-888. DTMF ANI/ENI Display Decoder

Pipo Communications. Model ST-888. DTMF ANI/ENI Display Decoder Pipo Communications Model ST-888 DTMF ANI/ENI Display Decoder 1516 Cassil Place Hollywood, California 90028-7106 Phone: 323-466-5444 Fax: 323-466-1520 www.pipo.cc Manual # 68-9888 May 1, 2002 Rev. 5/02

More information

SAILOR 6101 and 6103 Alarm Panel. Installation and user manual

SAILOR 6101 and 6103 Alarm Panel. Installation and user manual SAILOR 6101 and 6103 Alarm Panel Installation and user manual SAILOR 6101 and 6103 Alarm Panel Installation and user manual Document number: 98-130981-B Release date: August 22, 2013 i Disclaimer Any

More information

USER S MANUAL. Profile. MOBILE CALL GSM Alarm System

USER S MANUAL. Profile. MOBILE CALL GSM Alarm System MOBILE CALL GSM Alarm System USER S MANUAL System disarmed 00/00/00 00:00 ARM STAY CALL 1 2 3 4 5 6 7 8 9 Power Set Signal Alarm SOS ESC 0 ENTER Profile For a better understanding of this product, please

More information

GSM Alarm System. User s Manual. Profile. MOBILE CALL GSM Alarm System

GSM Alarm System. User s Manual. Profile. MOBILE CALL GSM Alarm System MOBILE CALL GSM Alarm System GSM Alarm System System disarmed 11/26/2013 User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS

More information

Model AD C AD RS-422 Distributor

Model AD C AD RS-422 Distributor Model C AD RS-422 Distributor Installation and Operation Instructions Speed LT, Speed, Speed Ultra, Speed Optima, and Speed Optima LT The C Distributor is used to interface American Dynamics Switching

More information

14 B&W OBSERVATION SYSTEM MODEL: HD14S1042-A

14 B&W OBSERVATION SYSTEM MODEL: HD14S1042-A 14 B&W OBSERVATION SYSTEM MODEL: HD14S1042-A FOR MORE INFORMATION WWW.STRATEGICVISTA.COM/ADT Before operating this system, please read this Manual thoroughly and retain it for future reference!!! Thank

More information

Alarm Tone Generator Model AG17

Alarm Tone Generator Model AG17 Alarm Tone Generator Installation & Operation P005089 Rev. C 150930 9/30/2015 12:25 PM Ph: 403.258.3100 \ email:info@guardiantelecom.com \ www.guardiantelecom.com Table of Contents Package Contents...

More information

USER MANUAL. Tavor 6-O On-Wall Active Speakers MODEL: P/N: Rev 1.

USER MANUAL. Tavor 6-O On-Wall Active Speakers MODEL: P/N: Rev 1. USER MANUAL MODEL: Tavor 6-O On-Wall Active Speakers P/N: 2900-300516 Rev 1 www.kramerav.com Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Recycling Kramer Products

More information

EverPlex 4BQ USER'S MANUAL. Real time B/W quad processor. High resolution picture quality. 4 Alarm input with buzzer

EverPlex 4BQ USER'S MANUAL. Real time B/W quad processor. High resolution picture quality. 4 Alarm input with buzzer EverPlex 4BQ USER'S MANUAL Real time B/W quad processor High resolution picture quality 4 Alarm input with buzzer Notice This manual is presented to the users of EverPlex 4BQ by EverFocus Electronics Corp.

More information

Instruction Manual. Digital Recorder. Model SDR-304. Make sure all the accessories are supplied together. Introduction Connection. Operation.

Instruction Manual. Digital Recorder. Model SDR-304. Make sure all the accessories are supplied together. Introduction Connection. Operation. Digital Recorder Instruction Manual Model SDR-304 Function r - ACCESS ALARM REMOTE WARNING TIMER MENU ENTER SHIFT Setting Others Make sure all the accessories are supplied together. AC120V NTSC CAUTION

More information

6502B RF Distribution

6502B RF Distribution 6502B RF Distribution User Guide Revision A - March 2004 Part Number 15247-201 Table of Contents Table of Contents About this User Guide Purpose...................................................... 1

More information

SMS GSM Alarm Messenger

SMS GSM Alarm Messenger SMS GSM Alarm Messenger Data Logging Alarm Input Relay Output Voice Temperature Humidity Analog Input Capture and Send Data via SMS Report triggered alarm via SMS Output triggered via SMS Auto pick up

More information

STATUS ALARM ALARM HISTORY POWER HISTORY RESET

STATUS ALARM ALARM HISTORY POWER HISTORY RESET Instruction Manual Model 1582-152 RF Protection Switch November 2009, Rev B. CH1 AUTO CH2 SWITCH 1 2 1 2 STATUS 1 2 MODEL 1582 SWITCH CROSS TECHNOLOGIES INC. CH1 ONLINE MANUAL SELECT CH2 SWITCH MANUAL

More information

installation & operation manual

installation & operation manual installation & operation manual TABLE OF CONTENTS INTRODUCTION... 2 FEATURES... 2 PROGRAMMING CONTACT ID... 3 INSTALLATION... 3 OPENING THE HAWK COVER... 3 POWER SUPPLY... 5 CHECK AC... 5 DRY CONTACTS

More information

3226 Trunk Port FXO Doorphone

3226 Trunk Port FXO Doorphone 3226 Trunk Port FXO Doorphone Installation and User Guide Algo Communication Products Ltd., Burnaby, BC Canada V5J 5L2 www.algosolutions.com - 1 - Document #: 90-00040F Important Safety Notice The 3226

More information

1040 Gas Monitor INSTALLATION AND OPERATING INSTRUCTIONS AMC-1040 WITH INTEGRAL ELECTROCHEMICAL SENSOR

1040 Gas Monitor INSTALLATION AND OPERATING INSTRUCTIONS AMC-1040 WITH INTEGRAL ELECTROCHEMICAL SENSOR 1040 Gas Monitor INSTALLATION AND OPERATING INSTRUCTIONS AMC-1040 WITH INTEGRAL ELECTROCHEMICAL SENSOR IMPORTANT: Please read these installation and operating instructions completely and carefully before

More information

Any additional devices linked to the system ET08 (computer, sensors, relays etc.) must be approved by LST EN standard.

Any additional devices linked to the system ET08 (computer, sensors, relays etc.) must be approved by LST EN standard. COMMUNICATOR ET08 User Manual v1.0 Safety instructions Please read and follow these safety guidelines in order to maintain safety of operators and people around: GSM communicator (gateway) ET08 (further

More information

User Guide. for the Beacon ProActTM 200 System

User Guide. for the Beacon ProActTM 200 System TM User Guide for the Beacon ProActTM 200 System BEACON recommends that this product, like all sump pumprelated products, be installed by or under the supervision of a professional plumbing contractor.

More information

6-inch Intelligent Speed Dome Installation Manual

6-inch Intelligent Speed Dome Installation Manual 6-inch Intelligent Speed Dome Installation Manual Version 1.0.2 Table of Contents 1 INSTALLATION PREPARATION... 1 1.1 Basic Requirements... 1 1.2 Installation Check... 1 1.3 Cable Preparation... 1 1.3.1

More information

ProTalk. Expander. Operating Manual Model B1292. July 28, 2009 Rev. 1.01

ProTalk. Expander. Operating Manual Model B1292. July 28, 2009 Rev. 1.01 ProTalk Expander Operating Manual Model B1292 July 28, 2009 Rev. 1.01 TABLE OF CONTENTS 1. Introduction... 1 2. Installation... 2 2.1 Wiring Diagram... 3 3. Operations... 4 4. Programming (B1225 Mode)...

More information

AUTO SWITCH ALARM PS1 PS2 CH2 MANUAL REMOTE HISTORY ALARM ONLINE AUTO MANUAL SELECT SWITCH RESET

AUTO SWITCH ALARM PS1 PS2 CH2 MANUAL REMOTE HISTORY ALARM ONLINE AUTO MANUAL SELECT SWITCH RESET Instruction Manual Model 1582-125L 1:1 Switch February 2017, Rev. 0 CH1 HISTORY LINE HISTORY RESET AUTO MANUAL SELECT CH2 HISTORY LINE RESET MANUAL REMOTE AUTO PS1 PS2 MODEL 1582 CROSS TECHNOLOGIES INC.

More information

System. For a better understanding of this product, please read this user manual thoroughly before using it.

System. For a better understanding of this product, please read this user manual thoroughly before using it. GSM Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. Chapter 1. Features Chapter 2. Control Panel Introduction Chapter 3.

More information

SA300 Amplifier OWNERS MANUAL

SA300 Amplifier OWNERS MANUAL SA300 Amplifier OWNERS MANUAL CONTENTS Page No. 1) Safety instructions. 2) 3) 4) 5) Connecting up your SA300. Connecting up using the high level input. Connecting up using the low level input. Setting

More information

MOBILE CALL GSM Alarm System User s Manual

MOBILE CALL GSM Alarm System User s Manual MOBILE CALL GSM Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents Function Introduction (3) Alarm Host Diagram

More information

FEC400 Series. Installation Manual

FEC400 Series. Installation Manual FEC400 Series Conventional microprocessor controlled fire detection and alarm panels with extinguishing control Installation Manual Version 2.3 / August 2004 Aritech is a GE Interlogix brand. http://www.geindustrial.com/ge-interlogix/emea

More information

USER MANUAL. Tavor 5-O (SPK-WA511) On-Wall Active Speakers MODEL: P/N: Rev 4

USER MANUAL. Tavor 5-O (SPK-WA511) On-Wall Active Speakers MODEL: P/N: Rev 4 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: Tavor 5-O (SPK-WA511) On-Wall Active Speakers P/N: 2900-300366 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Recycling

More information

P2267 NETWORK INTERFACE

P2267 NETWORK INTERFACE P2267 NETWORK INTERFACE USER MANUAL FOR OPERATING SYSTEMS: 22031-03 23636-01 October 2009 Associated Controls (Australia) Pty. Limited 2-4 Norfolk Road Greenacre, NSW, 2190. PH +61 2 9642 4922, FAX +61

More information

EduCam360-B. Fisheye Panorama Network Camera Manual

EduCam360-B. Fisheye Panorama Network Camera Manual EduCam360-B Fisheye Panorama Network Camera Manual Table of Contents 1 Important Safeguards and Warnings... 3 1.1 Electrical safety... 3 1.2 Environment... 3 1.3 Operation and Daily Maintenance... 4 1.4

More information

USER MANUAL. Galil 8-C Closed-back Ceiling Speakers MODEL: P/N: Rev 2

USER MANUAL. Galil 8-C Closed-back Ceiling Speakers MODEL: P/N: Rev 2 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: Galil 8-C Closed-back Ceiling Speakers P/N: 2900-300345 Rev 2 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Recycling

More information

Four channel video link For low cost video transmission

Four channel video link For low cost video transmission User Manual Four channel video link For low cost video transmission CFO First Mile series consist of fi bre optic modems which provide a high quality and losless video transmission for variety of CCTV

More information

Installation and ZONES: Operation Manual. Model: ON STI-34108

Installation and ZONES: Operation Manual. Model: ON STI-34108 N.O. COM N.C. + 12 V - IN + 12 V - OUT 500 ma 300 ma PLUG IN ADAPTER 12 V 500mA Trigger Output 12 V 75mA N.O. COM N.C. + 12 V - IN + 12 V - OUT 500 ma 300 ma PLUG IN ADAPTER 12 V 500mA Trigger Output 12

More information

16 Zone Voice Evacuation VA & PA Sound System

16 Zone Voice Evacuation VA & PA Sound System 16 Zone Voice Evacuation VA & PA Sound System 4 Channel Main Amp VA-MP4120 PC Server & Software VA-2000ST T-565 Zone 1-4 One Channel Standby Amp VA-2000RM VA-2000MA T-565 Zone 5-8 LAN CAT5 Cable CAT5 Data

More information

Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone!

Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone! Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone! GSM SMS Controller DCS-130 User Manual Ver 1.20 Date Issued: 14-9-2010

More information

Pump-Down Controller MODEL 4052

Pump-Down Controller MODEL 4052 Pump-Down Controller 4-20mA Input/Scalable Output Seal Fail Monitoring Duplex Pump Alternation Hand-Off-Auto Controls Dual Run-time Meters RS-485/Modbus Communications DESCRIPTION The Model 4052 Pump-Down

More information

Smart Series TAS-05-11, TAS-05-12

Smart Series TAS-05-11, TAS-05-12 Smart Series TAS-05-, TAS-05-2 Temperature Alarm & System Control Module User s Manual D-M-E Company ED-0063-OT-002-A D-M-E TAS User s Manual Page Copyright D-M-E Company 2000. All rights reserved. D-M-E

More information

Installation and Operation Manual. Model: STI TRIGGERED OUTPUT PLUG 12VDC, 75mA, 3 SEC. EMBOSSED PROGRAMMING

Installation and Operation Manual. Model: STI TRIGGERED OUTPUT PLUG 12VDC, 75mA, 3 SEC. EMBOSSED PROGRAMMING EMBOSSED PROGRAMMING SWITCHES 1-8 ANTENNAS ZONES: LEFT BUTTON CALL Embossed Programming Instructions: Installation and Operation Manual STI 8-Channel 1 - MIRROR MASTER OFF/ON RIGHT BUTTON FRONT COVER RESTORE

More information

Single Channel Video Receive Unit with two Bi-directional Data Channels and one Bi-directional Alarm Channel for a Multimode Fibre Link

Single Channel Video Receive Unit with two Bi-directional Data Channels and one Bi-directional Alarm Channel for a Multimode Fibre Link AMG5614A3 Instruction Manual Single Channel Video Receive Unit with two Bi-directional Data Channels and one Bi-directional Alarm Channel for a Multimode Fibre Link The AMG5614A3 is a standalone one channel

More information

IndigoVision Alarm Panel. User Guide

IndigoVision Alarm Panel. User Guide IndigoVision Alarm Panel User Guide THIS MANUAL WAS CREATED ON 2/21/2017. DOCUMENT ID: IU-AP-MAN002-4 Legal considerations LAWS THAT CAN VARY FROM COUNTRY TO COUNTRY MAY PROHIBIT CAMERA SURVEILLANCE. PLEASE

More information

IF-L/RF Protection Switch

IF-L/RF Protection Switch Instruction Manual Model 1582-1152 IF-L/RF Protection Switch August 2014, Rev. 0 CH1 HISTORY ALARM LINE HISTORY RESET AUTO MANUAL SELECT CH2 HISTORY ALARM LINE RESET MANUAL REMOTE AUTO ALARM PS1 PS2 MODEL

More information

Model AD2150 Video Matrix Switcher/Controller System

Model AD2150 Video Matrix Switcher/Controller System Model AD2150 Video Matrix Switcher/Controller System Installation and Operation Instructions This manual describes the installation and operating procedures for the American Dynamics model AD2150 Video

More information

Network Camera. Quick Guide DC-T1233WHX. Powered by

Network Camera. Quick Guide DC-T1233WHX. Powered by Network Camera Quick Guide DC-T1233WHX Powered by Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE

More information

Avigilon Control Center System Integration Guide

Avigilon Control Center System Integration Guide Avigilon Control Center System Integration Guide with Gallagher Command Centre INT-CARDAX-C-Rev2 Copyright 2011 Avigilon. All rights reserved. No copying, distribution, publication, modification, or incorporation

More information

GSM RFID VOICE Alarm System

GSM RFID VOICE Alarm System GSM RFID VOICE Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS [Function Instruction] [Control Panel] Control Panel

More information

Masthead Repeater Installation Handbook

Masthead Repeater Installation Handbook Masthead Repeater Installation Handbook Type: LGMT434 V4.74 Issue 6. 2a BELLEVUE ROAD, FRIERN BARNET, LONDON, N11 3ER Tel: 0044 (0) 208 368 7887 Fax: 0044 (0) 208 368 3952 PRE-INSTALLATION NOTES Unpacking.

More information

Ammonia Leak Detector Manual

Ammonia Leak Detector Manual Ammonia Leak Detector Manual Document No. 70-PHW-1023-R2.5 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,

More information

INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER

INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER 273 Branchport Avenue Long Branch, N.J. 07740 (908) 222-6880 INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER GENERAL: The Series PA-250 and PA-500 Watt Booster Amplifiers are designed

More information

RMS/RPX Reader. User Manual

RMS/RPX Reader. User Manual RMS/RPX Reader User Manual Copyright Disclaimer Trademarks and patents Intended use FCC compliance Copyright 2005, GE Security Inc. All rights reserved. This document may not be copied or otherwise reproduced,

More information

GUARDIAN CX10 PRIORITY/EVACUATION INTERFACE USERS MANUAL

GUARDIAN CX10 PRIORITY/EVACUATION INTERFACE USERS MANUAL GUARDIAN CX10 PRIORITY/EVACUATION INTERFACE USERS MANUAL General information The CX10 provides a priority input into an audio system of up to 10 channels in a 19 1RU package. The CX10 may be used with

More information

rvm4c Installation Guide Remote Video Module

rvm4c Installation Guide Remote Video Module rvm4c EN Installation Guide Remote Video Module rvm4c Installation Guide Installation Diagrams EN 2 Installation Diagrams for the Transmitting Unit rvm4c Installation Guide Basic Hardware Installation

More information

Mark 25 Ultrapure Water Conductivity Analyzer

Mark 25 Ultrapure Water Conductivity Analyzer Martek Instruments, Inc. Mark 25 Ultrapure Water Conductivity Analyzer Instruction Manual WARRANTY POLICY Unless otherwise stated, MARTEK INSTRUMENTS, INC. warrants this equipment to be free from defects

More information

USER MANUAL. Yarden 8-T (SPK-C820T) Ceiling Tile Speaker MODEL: P/N: Rev 2

USER MANUAL. Yarden 8-T (SPK-C820T) Ceiling Tile Speaker MODEL: P/N: Rev 2 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: Yarden 8-T (SPK-C820T) Ceiling Tile Speaker P/N: 2900-300306 Rev 2 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Recycling

More information

385 SERIES REMOTE HANDHELD SIREN ETSA385HR

385 SERIES REMOTE HANDHELD SIREN ETSA385HR ! WARNING Sirens produce loud sounds that may damage hearing: - Roll up windows. - Wear hearing protection. - Use only for emergency response. - Avoid exposure to siren sound outside of vehicle. Please

More information

KTD-348 Crosspoint 32 Matrix Video Switcher

KTD-348 Crosspoint 32 Matrix Video Switcher KTD-348 Crosspoint 32 Matrix Video Switcher 2003 Kalatel, a GE Interlogix company All Rights Reserved. Any GE Interlogix, Kalatel division, software supplied with GE Interlogix, Kalatel division, products

More information

How to use the BTRM in Remote Enclosures

How to use the BTRM in Remote Enclosures How to use the BTRM in Remote Enclosures Part Number: BTRM-200 Product Release Date: April 01, 2013 Software version: BTRM2_2013-05-06_2316_DNPV2V130D The Ventev Battery Test Remote Monitor (BTRM) has

More information

Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE

Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE General Description This guide provides a summary for installing and configuring the Centaur TM Cube Slave Alarm Signalling Equipment

More information

IR Intelligent Speed Dome Installation Manual

IR Intelligent Speed Dome Installation Manual IR Intelligent Speed Dome Installation Manual Version 1.0.0 Table of Contents 1 INSTALLATION PREPARATION... 1 1.1 Basic Requirement... 1 1.2 Installation Check... 1 1.3 Cable Preparation... 1 1.3.1 The

More information

OPERATION / INSTALLATION

OPERATION / INSTALLATION OPERATION / INSTALLATION & PROGRAMMING MANUAL AFP-2800 LCD-80 Fire Alarm Panel Revision 1.01 November 16, 2004 NSW (Head Office) 7 Columbia Court Norwest Business Park Baulkham Hills NSW 2153 Ph: (02)

More information

LUMA-NET 804CP / 808CP REMOTE CONTROL PANEL

LUMA-NET 804CP / 808CP REMOTE CONTROL PANEL LUMA-NET 804CP / 808CP REMOTE CONTROL PANEL INSTALLATION AND OPERATION GUIDE INTRODUCTION The NSI 804CP and 808CP represents a key part of a state of the art, total lighting control system. Combined with

More information

WM3000 WIRELESS MODULES

WM3000 WIRELESS MODULES WM3000 WIRELESS MODULES $$:05 $$:07 INSTALLATION INSTRUCTIONS Table of Contents Installation... 3 Mounting Instructions & Connections... 3 Setting the Dip Switches... 4 Setting the Recognition Time...

More information

RC801/803/ B 16E1 Fiber-Optic Multiplexer (Rev. M) User Manual. Raisecom Technology Co., Ltd. (04/2005)

RC801/803/ B 16E1 Fiber-Optic Multiplexer (Rev. M) User Manual. Raisecom Technology Co., Ltd. (04/2005) RC801/803/805-480B 16E1 Fiber-Optic Multiplexer (Rev. M) User Manual Raisecom Technology Co., Ltd. (04/2005) 1. Cautions Please read the following notices carefully before installing and using the device,

More information

EOTec 2000 ControlNet Fiber Optic SHR/DSHR Communications Modules* With Support for Single and Dual Channel Self-Healing Rings

EOTec 2000 ControlNet Fiber Optic SHR/DSHR Communications Modules* With Support for Single and Dual Channel Self-Healing Rings EOTec 2000 ControlNet Fiber Optic SHR/DSHR Communications Modules* With Support for Single and Dual Channel Self-Healing Rings Key Features Single and Dual Channel Self Healing Rings for High Reliability

More information

Pump-Up Controller MODEL 4062

Pump-Up Controller MODEL 4062 Pump-Up Controller 4-20mA Input/Scalable Output Seal Fail Monitoring Duplex Pump Alternation Hand-Off-Auto Controls Dual Run-time Meters RS-485/Modbus Communications DESCRIPTION The Model 4062 Pump-Up

More information

DSUB Collection Manual DSUB COLLECTION DSUB6F68K DSUB6F5K DSUB6F3K DSUB8F8K. DSUB Collection Installation Manual

DSUB Collection Manual DSUB COLLECTION DSUB6F68K DSUB6F5K DSUB6F3K DSUB8F8K. DSUB Collection Installation Manual DSUB COLLECTION DSUB6F68K DSUB6F5K DSUB6F3K DSUB8F8K 1 DSUB Collection Installation Manual Table of Contents Introduction 1 Specifications 2 What s Included 3 Tools & Items 3 Wire Recommendation 3 Planning

More information

Call stations and extensions

Call stations and extensions Novigo Call stations and extensions PT2001-A1, PT2002-A1, PT2008-A1, PT2009-A1, PTO2001-A1, PTO2002-A1, PTO2003-A1, PTO2004-A1, PTO2005-A1, PTO2006-A1, PTO2008-A1 EN 54-16-certified alarm and business

More information

MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL

MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL 95 Methodist Hill Drive Rochester, NY 14623 Phone: US +1.585.321.5800 Fax: US +1.585.321.5219 www.spectracomcorp.com Part Number 8143-5000-0050

More information

QSW8209. LCD Baby Monitor Wireless Camera

QSW8209. LCD Baby Monitor Wireless Camera QSW8209 LCD Baby Monitor Wireless Camera Visit Us on the Web at http://www.q-see.com Rev 092507 Contents 1 Packing List 2 Diagram 3 Structure 4 Installation 5 Specifications 6 FCC and EU 1. Packing List

More information

1228s Multidrop INSTRUCTIONS. Installation and Operation of the AMC-1228s Electrochemical Sensor Module For Use With Multidrop AMC Monitors

1228s Multidrop INSTRUCTIONS. Installation and Operation of the AMC-1228s Electrochemical Sensor Module For Use With Multidrop AMC Monitors 228s Multidrop INSTRUCTIONS Installation and Operation of the AMC-228s Electrochemical Sensor Module For Use With Multidrop AMC Monitors IMPORTANT: Please read these installation and operating instructions

More information

600 Range Dialer Installation Manual. Version 1.0

600 Range Dialer Installation Manual. Version 1.0 600 Range Dialer Installation Manual Version 1.0 The information contained is supplied without liability for any errors or omissions. No part may be reproduced or used except as authorised by contract

More information

Recording Server PRELOADED

Recording Server PRELOADED Configuration English Recording Server PRELOADED Rev. 1.1.2 / 2015-12-09 Module BANK Information about copyright, trademarks, design patents 2015 Dallmeier electronic The reproduction, distribution and

More information

TR-3D SUBWOOFER OWNER S GUIDE

TR-3D SUBWOOFER OWNER S GUIDE TR-3D SUBWOOFER OWNER S GUIDE CONTENTS 4 5 6 7 8 10 11 12 13 IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION ABOUT YOUR SUBWOOFER PLACEMENT OF SUBWOOFER CONTROLS AND CONNECTIONS 2.1 SET UP MULTI-CHANNEL SET

More information

GasScanner 4C. Four Channel Monitor. Operator s Manual. MINT-0280-XX Rev. A 02/25/08

GasScanner 4C. Four Channel Monitor. Operator s Manual. MINT-0280-XX Rev. A 02/25/08 GasScanner 4C Four Channel Monitor Operator s Manual MINT-0280-XX Rev. A 02/25/08 Product Warranty Matheson Tri-Gas., warrants gas alarm equipment sold by us to be free from defects in materials, workmanship,

More information

M2500 Engine Controller Installation Manual

M2500 Engine Controller Installation Manual M2500 Engine Controller Installation Manual Revision: 23-04-2012 Page 1 Contents 1 Preface... 4 2 Installation... 5 3 Terminal Connections... 6 4 Inputs... 7 4.1 Power Supply... 7 4.2 Mode/ Control Inputs...

More information

RTD TEMPERATURE SENSING SYSTEM

RTD TEMPERATURE SENSING SYSTEM General Overview RTD TEMPERATURE SENSING SYSTEM The Prime Technology RTD Temperature System 9219-00-0002 is a three-channel temperature measuring system that utilizes two RTD Temperature Sensor inputs

More information