CEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)
|
|
- Anis Bell
- 5 years ago
- Views:
Transcription
1 Introduction to EN 81-20/50 (revision of EN 81-1/2) CEN/TC 10: August 6 th, 2014
2 CEN/TC 10 Work Program
3 CEN/TC 10 Structure European Standardization for Lifts, Escalators and Moving Walks 3
4 CEN/TC 10 Work Program Established in 1971 Publications Standards: 31 Technical Specifications: 4 Technical Report: 2 Regular review of all publications Under development Standards: 7 Technical Specifications: 0 Technical Report: 1 Two main standards EN81-1 and EN81-2 (Lifts) EN115-1 (Escalators) European Standardization for Lifts, Escalators and Moving Walks 4
5 CEN/TC 10 Work Program Total of 45 standards, 37 published and 8 under development European Standardization for Lifts, Escalators and Moving Walks 5
6 Revision of EN 81-1/2
7 EN and EN Revision of EN 81-1 and EN 81-2 EN 81-1 and EN 81-2, are being revised The result; two new standards EN 81-20: Requirements for complete passenger or goods passenger lift installations independent of the driving system EN 81-50: Description of the examinations, calculations and tests of lift components used in any type of lift (passenger, goods passenger, goods only lift, etc.) Many aspects of the standards have been changed and safety provisions have been improved European Standardization for Lifts, Escalators and Moving Walks 7
8 EN and EN Preparation for revision of EN 81-1/2 Text of EN 81-1 & EN 81-2 and Amendments Interpretations Standardisation Requirements CEN Guides 4, 6 and12 CEN Guide 414 Comments Outstanding from previous revisions Legislative Lifts Directive Machinery Directive Low Voltage Directive EN EN Ease of use and Maintenance Comments from International interest groups China Other Asia Pacific Countries North America Etc. Comments from European interest groups EU Commission Notified Body for Lifts Trade Associations Etc. More than 700 items for revision were identified! European Standardization for Lifts, Escalators and Moving Walks 8
9 Examples of changes and improvements
10 EN and EN Examples of safety improvement for passengers Higher requirements for strength of landing and car doors Preventing door striking the passengers when entering or leaving the lift car Higher requirements for strength of car walls Prevision against possible fall into the lift well due to self-rescue Higher requirements for rescue of trapped persons European Standardization for Lifts, Escalators and Moving Walks 10
11 EN and EN Examples of safety improvement for workers Higher requirements for refuge spaces on the car roof and in the pit Higher requirements for balustrades on the car roof Higher requirements to prevent risk of trapping on the car roof and in the pit Higher requirements for the size and location of landing door unlocking device Control station in the pit to avoid using ladders and stools to reach car components Specific requirements for over connecting the car or landing door contacts during the maintenance operations European Standardization for Lifts, Escalators and Moving Walks 11
12 Next Steps
13 EN and EN Time table EN and EN Published on August, 2014 EN 81-1 and EN 81-2 Date of Withdrawal August, 2017 European Standardization for Lifts, Escalators and Moving Walks 13
14 CEN/TR 81-12
15 EN and EN CEN/TR CEN/TR (Use of EN and EN in specific markets) New document (CEN Technical Report) Based on the comments received from ISO non-european members during the pren 81-20/50 CEN Enquiry It provides Comparison of clause numbers of EN 81-1/2 and EN 81-20/50 to assist with adoption of the new standards Explanation on the basics of EN 81-20/50, for example importance of assumptions in the standard or understanding the meaning of shall, should, etc. Some guidance on how to align the EN 81-20/50 requirements with national regulations (outside Europe) To be published before the end of 2014! European Standardization for Lifts, Escalators and Moving Walks 15
16
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13015:2001 Liftide ja eskalaatorite tehnohooldus. Tehnohooldusjuhendite reeglid Maintenance for lifts and escalators - Rules for maintenance instructions EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 81-10 November 2008 ICS 91.140.90 Supersedes CEN/TR 81-10:2004 English Version Safety rules for the construction and installation of lifts
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationPED Workshop Nicosia, 3-5 October, 2005
EU Trade Policy in the Pressure Equipment Sector An Industry Perspective PED Workshop Nicosia, 3-5 October, 2005 Frank Wohnsland VDMA German Engineering Federation Page 1 4 October 2005 Our platform We,
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationAn overview of sterilizer equipment standards current and planned. Richard Bancroft Science & Technical Director STERIS
An overview of sterilizer equipment standards current and planned Richard Bancroft Science & Technical Director STERIS #deconevent2018 An Overview of Sterilization & Equipment Standards Current & Planned
More informationBUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
More informationStandards and Standardisation. An Overview
Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 81-28:2003 Liftide valmistamise ja paigaldamise ohutuseeskirjad. Inimeste ja kauba transpordi liftid. Osa 28: Reisi- ja kaubaliftide kaugjuhtimishäiresüsteem Safety rules for the
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationBUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY
Pages: 1 BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY The whole industry from raw materials through the production process to the customer needs material handling technology.
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationAS/NZS :2014
AS/NZS 4024.1601:2014 (EN 953:1997 inc A1:2009, IDT) Australian/New Zealand Standard Safety of machinery Part 1601: Design of controls, interlocks and guarding Guards General requirements for the design
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationEN transition from BS 1387 Structural & Conveyance Business
Corus Tubes EN 10255 transition from BS 1387 Structural & Conveyance Business EN 10255 A smooth transition with Corus Install Contents 1 Introduction 2 The new standard 4 Detailed comparison 7 Comparison
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-5:2002 Tänavavalgustuspostid. Osa 5: Nõuded terasest tänavavalgustuspostidele Lighting columns - Part 5: Requirements for steel lighting columns EESTI STANDARDIKESKUS EESTI STANDARDI
More informationCertification of the conformity of QSCDs for server-signing with the requirements laid down in Annex II of Regulation (EU) No.
Certification of the conformity of QSCDs for server-signing with the requirements laid down in Annex II of Regulation (EU) No. 910/2014 Version 1.0 Date 14.09.2017 Designated Body SRC Security Research
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationInterim Australian Standard
AS 1735.10(Int) 1998 (Incorporating Amendment Nos 1 and 2) Expries 5 August 2003) AS 1735.10(Int) Interim Australian Standard Lifts, escalators and moving walks Part 10: Tests This Australian Standard
More informationUpdate on European Standardization Work
Update on European Standardization Work 16th International Water Mist Conference 21st & 22nd September 2016 in Vienna, Austria Joachim Böke Minimax Viking GmbH Industriestraße 10/12 23840 Bad Oldesloe
More informationEN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements
EN 50165 Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements J. Stenger CLC/TC61/WG3 24. April 2002 1 History Gas-Appliance Directive 96/306/EEC Annex
More informationEnglish version. This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 10.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 81-80 December 2001 ICS English version Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-18 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation
More informationLATEST HYDROCARBON-BASED REFRIGERATION TRENDS
LATEST HYDROCARBON-BASED REFRIGERATION TRENDS René van Gerwen, ENTROPY Cooling Solutions - Tour around the Globe - Regulations, Codes, Standards & Guidelines - Skills, Training & Certification - Conclusions
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13383-1:2002 Armeeritud kivi. Osa 1: Spetsifikatsioon Armourstone - Part 1: Specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationBUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
More informationBUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY 1. BUSINESS ENVIRONMENT OF THE CEN/TC 132 It may be hard to believe but only 150 years ago aluminium was considered to be
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14752:2006 Raudteealased rakendused. Veeremi uksesüsteemid Railway applications - Bodyside entrance systems EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationThe Traffic and Travel Information (TTI) Chain and Integration With Co-operative Systems
The Traffic and Travel Information (TTI) Chain and Integration With Co-operative Systems Dr Jonathan Harrod Booth 10 February 2011 Policy Context TTI features significantly in the ITS Action Plan, the
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More informationLicensed Copy: Tom Magee, Howden Power, 14 May 2003, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS EN 1291:1998 Incorporating Amendment No. 1 Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels The European Standard EN 1291:1998, with the incorporation
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)
C 209/12 EN Official Journal of the European Union 15.6.2018 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council,
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationSVENSK STANDARD SS-EN Stållinor Säkerhet Del 9: Slutna bärlinor för linbaneanläggningar för persontransport
SVENSK STANDARD SS-EN 12385-9 Fastställd 2002-11-08 Utgåva 1 Stållinor Säkerhet Del 9: Slutna bärlinor för linbaneanläggningar för persontransport Steel wire ropes Safety Part 9: Locked coil carrying ropes
More informationAS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard
Australian/New Zealand Standard AS/NZS 4821:2014 (EN 15090:2012, MOD) Protective footwear for firefighters Requirements and test methods Superseding AS/NZS 4821:2006 AS/NZS 4821:2014 This standard, is
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13564-1:2002 Veetaset reguleerivad seadmed ehitistele. Osa 1: Nõuded Anti-flooding devices for buildings - Part 1: Requirements EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThe ATEX Directive 94/9/EC
The ATEX Directive 94/9/EC operation and perspectives in Europe and the World The ATEX sector in the European Union From the Market description, competitiveness analysis in the field of products and protective
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1073-2:2002 Kaitserõivad radioaktiivse saastumise eest. Osa 2: Nõuded ja katsemeetodid mitteventileeritavatele kaitserõivastele radioaktiivsete tolmuosakestega saastumise eest Protective
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1469:2005 Looduslikust kivist tooted. Välisvooderdusplaadid. Nõuded Natural stone products - Slabs for cladding - Requirements EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationSafety rules for the construction and installation of lifts Existing lifts
BRITISH STANDARD BS EN 81-80:2003 Safety rules for the construction and installation of lifts Existing lifts Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
More informationPlast- och gummimaskiner - Säkerhetskrav för formsprutmaskiner Rubber and plastics machines - Injection moulding machines - Safety requirements
Plast- och gummimaskiner - Säkerhetskrav för formsprutmaskiner Rubber and plastics machines - Injection moulding machines - Safety requirements Rubber and plastics machines - Injection moulding machines
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationThis document is a preview generated by EVS. Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EESTI STANDARD EVS-EN 81-1:1998+A3:2010 Safety rules for the construction and installation of lifts - Part 1: Electric lifts EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 81-1:1998+A3:2010 sisaldab
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationETICS & HARMONIZATION The challenges
ETICS & HARMONIZATION The challenges Ralf Pasker Managing Director European Association for ETICS (EAE) European ETICS Forum 2015 ETICS & harmonization The Challenges 12/10/2015 Ralf Pasker 1 Components
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1028-1:2002 Tuletõrjepumbad. Löökpadruniga tuletõrje tsentrifugaalpumbad. Osa 1: Klassifikatsioon. Üld- ja ohutusnõuded Fire-fighting pumps - Fire-fighting centrifugal pumps with
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9902-2:2001 Tekstiilimasinad. Mürakatsekood. Osa 2: Ketruse ettevalmistus- ja ketrusmasinad Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationÍST EN :2015. Gildistaka ICS: 53.06
ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform
More informationLicensed Copy: Akin Koksal, Bechtel Ltd, 10 December 2002, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS EN 1289:1998 Incorporating Amendment No. 1 Non-destructive testing of welds Penetrant testing of welds Acceptance levels The European Standard EN 1289:1998, with the incorporation of
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationDoes your equipment meet your needs and the operational capacity stated by the manufacturer?
Does your equipment meet your needs and the operational capacity stated by the manufacturer? Richard Bancroft, B.Sc (Hons) Registered Authorising Engineer (Decontamination), UK Convenor, ISO/TC 198 WG
More informationCEN/TC 10. prcen/tr 81-76: Date: CEN/TC 10. Secretariat: AFNOR. Einführendes Element Haupt-Element Teil 76: Ergänzendes Element
CEN/TC 10 Date: 2006-09 prcen/tr 81-76:2006.2 CEN/TC 10 Secretariat: AFNOR Safety rules for the construction and installation of lifts Particular applications for passengers and goods passenger lifts Part
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationGas Technical Standards Committee
Gas Technical Standards Committee GTSC Annual Report 2009 Scope 1. To advise the NSAI with regard to Irish Standards and Codes of Practice necessary for the transmission distribution and utilisation of
More informationUsing consumer appliances in Europe the consumer view
Using consumer appliances in Europe the consumer view February 2011 European Association for the Co-ordination of Consumer Representation in Standardisation Av. de Tervueren 32, box 27 B-1040 Brussels,
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationBUSINESS PLAN CEN/TC 433 ENTERTAINMENT TECHNOLOGY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 433 ENTERTAINMENT TECHNOLOGY EXECUTIVE SUMMARY Business Environment European business within entertainment technology leads the world market and covers from 60 to 70% of the
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16629 July 2014 ICS 91.140.99 English Version Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 014/04)
C 14/36 EN Official Journal of the European Union 16.1.2015 Commission communication in the framework of the implementation of Council Directive 90/385/ EEC of 20 June 1990 on the approximation of the
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationhttp://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 81-71:2005+A1:2007 Fastställd 2007-02-01 Utgåva 1 Säkerhetsregler
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationCEN/TC 186 ISO/TC 244
SAFETY & STANDARDS Industrial Thermoprocessing Equipment (IThE) CEN/TC 186 ISO/TC 244 IEC/TC 27 Standardisation for IThE in Europe Basis of European Standardization on Machinery and Thermoprocessing Equipment
More informationMedical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
More informationFAQs Radio Equipment Directive (RE-D)
FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13310:2003 Köögivalamud. Funktsionaalsed nõuded ja katsemeetodid Kitchen sinks - Functional requirements and test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
More informationThe future of the CPR, is CE marking changing? 26/10/2018
< The future of the CPR, is CE marking changing? 26/10/2018 Starting at the very beginning European Union 1989 Construction Products Directive CE marking for construction concept Fit for purpose European
More informationISO/CEN ACTIVITIES. EURL-Campylobacter workshop 2018 Hanna Skarin
ISO/CEN ACTIVITIES EURL-Campylobacter workshop 2018 Hanna Skarin RELEVANT GROUPS IN ISO AND CEN ISO/TC34/SC9: - ISO: International Standardisation Organisation - TC34: Technical Committee 34 on Food products
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationAustralian Standard. Safeguarding of machinery
AS 4024.2 1998 Australian Standard Safeguarding of machinery Part 2: Installation and commissioning requirements for electro-sensitive systems Optoelectronic devices This Australian Standard was prepared
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationStandards in Security Shutters & Fire Shutters (UK & USA)
Standards in Security Shutters & Fire Shutters (UK & USA) Jason Powell 17.11.17 For UKRS Ltd Contents 1. Roller Shutter Safety Standards 1.1 UK / Europe 1.2 USA 2. Fire Shutter / Curtain Standards 2.1
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af
More informationOFFICIAL JOURNAL OF IN VITRO DIAGNOSTIC MEDICAL DEVICES DIRECTIVE (98/79/EC)
OFFICIAL JOURNAL OF IN VITRO DIAGNOSTIC MEDICAL DEVICES DIRECTIVE (98/79/EC) Try it for free on: https://ce-marking.help This Free of Charge application was designed to help manufacturers, consultants,
More informationApplicable Standards BS EN ISO 7010: Graphical symbols Safety colours and safety signs Registered safety signs
Applicable Standards BS EN ISO 7010: 2011 Graphical symbols Safety colours and safety signs Registered safety signs BS EN ISO 7010 The reason for change In 2011 BS EN ISO 7010 was introduced throughout
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 226/03)
10.7.2015 EN Official Journal of the European Union C 226/43 Commission communication in the framework of the implementation of the Directive 98/79/EC of the European Parliament and of the Council of 27
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationOFFICIAL JOURNAL OF ACTIVE IMPLANTABLE MEDICAL DEVICES DIRECTIVE (90/385/EEC)
OFFICIAL JOURNAL OF ACTIVE IMPLANTABLE MEDICAL DEVICES DIRECTIVE (90/385/EEC) Try it for free on: https://ce-marking.help This Free of Charge application was designed to help manufacturers, consultants,
More informationAustralian/New Zealand Standard
AS/NZS 4692.1:2005 (Incorporating Amendment Nos 1 and 2) Reconfirmed 2016 AS/NZS 4692.1:2005 A2 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general
More information