This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
|
|
- Vivian McDonald
- 5 years ago
- Views:
Transcription
1 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Location(s) where activities are performed under accreditation Head Office Sir Winston Churchill-laan E ijswijk The Netherlands Location bbreviation/ location code Head Office Sir Winston Churchill-laan E ijswijk The Netherlands Wilmersdorf C peldoorn The Netherlands Mobile laboratory M 1 Plastic-piping systems Determination the resistance to internal pressure NEN-EN-ISO Determination tensile properties ISO Determination the melt mass-flow rate (MF) ISO 1133 This annex has been approved by the Board the Dutch ccreditation Council, on its behalf, J..W.M. de Haas Director Operations 1 If there is a referral to a code starting with NW, NP, E or IF, this concerns a scheme mentioned on the v-b010 list ( If no date or version number is mentioned for a normative document, the accreditation concerns the most current version the document or scheme. Dutch ccreditation Council v Pagina 1 van 16
2 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic-piping systems Determination oxidation induction time NEN-EN Determination the Determination temperature and enthalpy melting and crystallization ISO Effects heating on pipes Longitudinal reversion 7 Effects heating on fittings - Methods for visually assessing the effects heating NEN-EN-ISO 2505 NEN-EN-ISO Determination pendulum impact strength by the Charpy method 9 Determination Vicat stening temperature (VST) 10 Determination dimensions plastic pipes and plastics components 11 Determination the long-term hydrostatic strength by extrapolation 12 Determination the adhesion force multilayer pipes by using a pulling rig ISO 9854 NEN-EN-ISO 306, ISO ISO ISO NEN-EN-ISO 3126 NEN-EN-ISO 9080 DVGW W , DVGW W Determination creep ratio ISO Determination ring stiffness ISO Isolation materials Determination thermal resistance NEN-EN NEN-EN 12939, NEN-EN Dutch ccreditation Council v Pagina 2 van 16
3 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic pipes and other devices fabricated PVC-U Performance tests as mentioned in DVGW GW335-1: Determination : the general impression, the surface condition, the colour, the dimensions and tolerances, the impact strength, the effects heating, the resistance to dichloromethane, the Vicat stening temperature, DVGW GW , DIN 8062, EN 1452, DVGW GW , EN-ISO 3126, EN 744, EN-ISO 2505, NEN-EN-ISO 9852, ISO , ISO , ISO , EN-ISO 1167 the resistance to internal pressure. 17 Plastic pipes fabricated PE80 and PE100 Performance tests as mentioned in DVGW GW335-2: Determination : the melt mass-flow rate, dry weight loss, the homogeneity the pipe material, the colour, the weather resistance, -pressing test and pulling test, the thermal stability by OIT, the slow crack growth (Notch test), the rapid crack propagation (CP), the general impression, the surface condition, the colour, the dimensions and tolerances, the effects heating, the homogeneity the pipe material, the resistance to internal pressure, the tensile properties. EN-ISO 1133, DVGW GW , DVGW GW , DVGW GW , EN 921, EN-ISO 6259, EN 728, EN-ISO 13479, ISO 13477, DVGW GW , DVGW GW , DVGW GW , EN-ISO 3126, EN-ISO 2505, DVGW GW , EN-ISO 1167, EN-ISO Dutch ccreditation Council v Pagina 3 van 16
4 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic pipes fabricated PE- Xa Performance tests as mentioned in DVGW GW335-3: Determination : the melt mass-flow rate dry weight content the homogeneity the pipe material the colour, the weather resistance, -pressing test and pulling test, the thermal stability by OIT, the rapid crack propagation (CP), the general impression, the surface condition, the colour, the dimensions and tolerances, the degree crosslinking the effects heating, the homogeneity the pipe material, the resistance to internal pressure. EN-ISO 1133, DVGW GW , DVGW GW , DVGW GW , EN 921, EN-ISO 6259, EN 728, ISO 13477, DVGW GW , DVGW GW , DVGW GW , EN-ISO 3126, DIN 16892, EN-ISO 2505, DVGW GW , EN-ISO 1167 Dutch ccreditation Council v Pagina 4 van 16
5 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic devices fabricated PE80 and PE100 Performance tests as mentioned in DVGW GW335-B2: Determination : the melt mass-flow rate, dry weight content, the homogeneity the pipe material, the colour, the weather resistance, -pressing test and pulling test, the thermal stability by OIT, the slow crack growth (Notch test), the rapid crack propagation (CP), the general impression, the surface condition, the colour, the dimensions and tolerances, the effects heating, the resistance to internal pressure, the crushing decohesion for electrusion assemblies. EN-ISO 1133, DVGW GW335-B , DVGW GW335-B , DVGW GW335-B , EN 921, EN-ISO 6259, EN 728, EN-ISO 13479, ISO 13477, DVGW GW , DVGW GW335-B , DVGW GW335-B , EN-ISO 3126, EN-ISO 2505, EN-ISO 1167, ISO Multi-layered pipes in the drinking water installation Performance tests as mentioned in DVGW W542: Determination : the melt mass-flow rate, the dry weight content, the melting temperature, the surface condition, the dimensions and tolerances, the effects heating, the cone test, the resistance to internal pressure, the degree cross linking, the adhesion strength, the immersion temperature cycling test, the adhesion strength after aging, the visual aspects the aluminium surface. EN-ISO1133, DVGW W542:2009, ISO :1999.1, DIN 8075, DIN 16892, DIN 8078, DIN 16968, EN-ISO 3126, EN-ISO 2505, DVGW W542: , EN-ISO 1167, DIN 16892, DVGW W542: , DIN , EN 12293:2000 in water, DVGW W542: , DIN 53357, DVGW W542: , , DIN Dutch ccreditation Council v Pagina 5 van 16
6 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic pipes in the drinking water installation Performance tests as mentioned in DVGW W544: Determination : the melt mass-flow rate, the dry weight content, the delivery condition, the surface condition, the dimensions and tolerances, the effects heating, the degree cross linking, the resistance to internal pressure, the homogeneity the pipe material, the melt mass-flow rate the pipe, the impact resistance, the ageing the pipe material, the Vicat stening temperature. EN-ISO1133, DVGW W , DVGW W , DVGW W , DIN 16968, DIN 8078 DIN 8080, DIN 16892, DIN 16968, DIN 8078, DIN 8080, DIN 16892, EN-ISO 3126, DIN 8078, DIN 16968, EN-ISO 2505, DIN 8078, DIN 16892, DIN 8080, ISO 2505, DIN 16892, EN-ISO 1167, DVGW W , EN-ISO 1133, DIN 8078, EN 744, ISO 9854, DIN 8080, DVGW W , DIN 8080, EN-ISO Plastic piping systems Determination the resistance mounted assemblies to temperature cycling NEN-EN WS test & acceptance criteria , Determination the leak tightness under vacuum 24 Determination the resistance to pullout under constant longitudinal force 25 Determination the resistance to elevated temperature cycling for sewage systems 26 Determination behaviour under cyclic movement NEN-EN NEN-ISO 3501 WS test & acceptance criteria , , , , , , , , , NEN-EN 1055 DVGW W Dutch ccreditation Council v Pagina 6 van 16
7 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Plastic piping systems Determination behaviour in twisting motion criteria DVGW W Determination behaviour in the cyclic bending test 29 Determination leak tightness under pressure while subjected to bending DVGW W NEN-EN-ISO ubber/tpe Determination hardness ISO 48, ISO Determination tensile stress-strain properties ISO Determination tear strength ISO Determination compression set ISO Determination accelerated aging or heat resistance 35 Determination stress relaxation in compression ISO 188 ISO Determination the effect liquids ISO Determination density ISO Determination the resistance to ozone cracking NEN-ISO Dutch ccreditation Council v Pagina 7 van 16
8 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Fittings and piping systems in the drinking water installation Performance tests as mentioned in DVGW W534:2004 Determination : the long-term behaviour material, the effects heating, the Vicat stening temperature, the melt flow index, the degree cross linking, the resistance to hydrolysis, the thermal ageing, the properties elastomeric sealing elements, the castings (density test), the pressure testing on the jointing, the dimensions and tolerances the joints, the surface condition and homogeneity, the behaviour in case overpressure, the leak tightness under vacuum, the pressure cycling, the thermal cycling test, the behaviour under cyclic movement, the behaviour in twisting motion criteria, the behaviour in the cyclic bending test, the long-term internal pressure test, the pull-out resistance, the bending test, the unpressed leakage test by pressure testing. EN-ISO 9080, NEN-EN-ISO 9852, EN-ISO 306, EN-ISO 1133, DIN 16892, DVGW W , EN-ISO 2578, EN 681-1, DVGW W , EN-ISO 1167, EN-ISO 1167, EN 10226, DVGW W , EN-ISO 1167, EN 12294, EN 12295, EN 12293, DVGW W , DVGW W , DVGW W , EN-ISO 1167, NEN-ISO 3501, NEN-EN-ISO 3503, EN-ISO 1167 Dutch ccreditation Council v Pagina 8 van 16
9 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Tap ware, industrial boiler fittings, pressure reduction valves, relieve valves, expansion reservoir, metal pipes, piping systems, anti pollution devices and heating devices Determination watertightness, pressure pick-up probe EN 200, EN 816, EN 817, EN 1074, EN , EN , EN 1111, EN 1213, EN 1254, EN 1287, EN 1567, EN 13828, EN 14124, NHS D08, S/NZS 3718:2005, S/NZS :2005, S/NZS 3499:2006, S/NZS :1999, NEN-EN 13618, NEN-EN 15091, NEN-EN 14124, NEN-EN 1112 WS test & acceptance criteria , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Tap ware and aerators Determination the volume flow rate; pressure pick-up probe; digital Q-meter and data logger EN 200, EN 246, EN 816, EN 817, EN 1111, EN 1287, EN 1213, EN 13828, EN 14124, NHS D08, S/NZS 3718:2005, S/NZS 3662:2005, NEN-EN 1112, NEN-EN WS test & acceptance criteria , , S-NZS 3718:2005 paragraph 2.6 and testing against specifications in accordance with S 6400:2005 paragraph 3 42 Sanitary tap ware Determination the mixing water temperature; thermometer and data logger EN 817, EN 1111, EN 1287, NHS D08, S/NZS :2005, S/NZS 3662:2005 Dutch ccreditation Council v Pagina 9 van 16
10 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Sanitary tap ware, flushing devices, anti pollution devices, hot water storage vessels, flexible connecting hoses Determination mechanical endurance; automatic test methods EN 200, EN 816, EN 817, EN 1111, EN 1213, EN 1287, EN 13828, EN 13959, EN 14124, S/NZS 3718:2005, S/NZS :1999, NEN-EN 14055:2010, NEN-EN 997:2012, TS WS test & acceptance criteria , , , , , , , , , , , , , , , , , , , , , , , Sanitary tap ware Determination resistance against torque 45 Test for safety with cold water failure by determination the leakage rate EN 200, EN 816, EN 817, EN 1111, EN1287, S/NZS 3718:2005, S/NZS :2005, NEN-EN 1112:2008, NEN-EN 14124:2004 WS test & acceptance criteria , , , , EN 1111, EN 1287, NHS D08, S/NZS : (Chromium) Coated s Determination the corrosion resistance electrodeposited coatings Ni-Cr EN 248, TS :2005, NEN-EN 14055: nti pollution devices, ice machines, hydraulic switches, sanitary tapware Determination functional properties; measuring equipment NEN-EN 14055:2010 WS test & acceptance criteria , , Dutch ccreditation Council v Pagina 10 van 16
11 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Sanitary taps, valves, fittings, anti pollution devices Determination dimensions, including air gaps: measuring equipment EN 200, EN 816, EN 817, EN 997, EN 1111, EN 1213, EN 1254, EN 1287, EN 10226, EN 13828, S/NZS 3718:2005, S/NZS :2005, S/NZS :1999, NEN-EN 14124:2004, NEN-EN 13618:2011, NEN-EN 15091:2007 WS test & acceptance criteria , , , , , , , , , , , , , , , , , , , , , , , , , , Sanitary taps, valves, vacuum breakers, fittings, anti pollution devices Vacuum tests EN 14124, S/NZS :1999, S/NZS 3494:1997, S/NZS 3982:1996, NEN-EN 14055:2010, NEN-EN 14688:2006 WS test & acceptance criteria , , , , , , , , , , , , , , , , , Piping systems and flushing devices Determination resistance against deformation and/or damage WS test & acceptance criteria , , WS test & acceptance criteria , , , , , , , , , , , , , , , , Dutch ccreditation Council v Pagina 11 van 16
12 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Check valves Determination mechanical properties EN WS test & acceptance criteria , Flushing devices Determination corrosion resistance WS test & acceptance criteria Determination functional properties; measuring equipment EN 997 WS test & acceptance criteria , , , , S-NZS :1994 paragraph 4.7 and testing against specifications in accordance with S 6400:2005 paragraph 3 54 Plastic piping systems Determination resistance joints to pressure cycling EN 12295, S/NZS 3499:2005, NEN-EN 13618:2011, NEN-EN 15091:2007, NEN-EN 14124: Sanitary and industrial nozzles and shower heads Determination the spray pattern, using pattern measuring device S/NZS 3662: Fixed firefighting Minimum flow rate, flowmeter NEN-EN 671-1:2012 nnex E systems- Hose systems - Hose Effective throw range, geometrically NEN-EN 671-1:2012 nnex E reels with semirigid hose Spray discharge, geometrically NEN-EN 671-1:2012 nnex E.3 59 eel rotation NEN-EN 671-1:2012 nnex F.2 60 eel swinging NEN-EN 671-1:2012 nnex F.3 61 eel esistance to impact NEN-EN 671-1:2012 nnex F eel esistance to load NEN-EN 671-1:2012 nnex F Shut-f nozzle - esistance to impact NEN-EN 671-1:2012 nnex E.1 Dutch ccreditation Council v Pagina 12 van 16
13 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Fixed firefighting Shut-f nozzle Operating torque NEN-EN 671-1:2012 nnex E.2 65 systems- Hose systems - Hose Inlet stop valve utomatic inlet stop NEN-EN 671-1:2012 nnex F.2 reels with semirigid hose valve 66 Hydraulic properties esistance to internal pressure NEN-EN 671-1:2012 nnex F.7 67 Hydraulic properties Strength NEN-EN 671-1:2012 nnex F.8 68 eel - Unwinding load NEN-EN 671-1:2012 nnex F.4 69 eel - Dynamic breaking NEN-EN 671-1:2012 nnex F.5 70 esistance to corrosion coated parts NEN-EN 671-1:2012 nnex B 71 esistance to corrosion waterways NEN-EN 671-1:2012 nnex D 72 Fixed firefighting Minimum flow rate, flow meter NEN-EN 671-2:2012 nnex E systems - Hose systems - Hose Effective throw range, geometrically NEN-EN 671-2:2012 nnex E systems with layflat hose Spray discharge, geometrically NEN-EN 671-2:2012 nnex E.3 75 Shut-f nozzle - esistance to impact NEN-EN 671-2:2012 nnex E.1 76 Shut-f nozzle Operating torque NEN-EN 671-2:2012 nnex E.2 77 Hydraulic properties esistance to internal pressure 78 Hydraulic properties Security couplings NEN-EN 671-2:2012 nnex F NEN-EN 671-2:2012 nnex F 79 esistance to corrosion coated parts NEN-EN 671-2:2012 nnex B 80 esistance to corrosion waterways NEN-EN 671-2:2012 nnex D 81 Underground fire Leaktightness EN :2000, nnex hydrants 82 Hydraulic characteristics EN :2004, Pillar fire hydrants Leaktightness EN :2000, nnex 84 Mechanical strength EN 14384:2005, Dutch ccreditation Council v Pagina 13 van 16
14 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Pillar fire hydrants Hydraulic characteristics - Flow characteristics EN 14384:2005, Gates Operating Forces 1400 N NEN-EN M 87 Industrial, commercial and garage doors and gates Determination Operating forces (for power operated doors) 1400 N NEN-EN 12445; NEN-EN M The accreditation for the activities below is suitable for notification European construction s regulation No 305/2011, System 3 Verification Constancy Performance Product area 2 Decision: 99/93/EC NEN-EN :2003+2:2016 Doors, windows, shutters, blinds, gates and related building hardware (1/1): - 88 Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)). Determination Operating forces (for power operated doors) 1400 N NEN-EN 12445; NEN-EN M Dutch ccreditation Council v Pagina 14 van 16
15 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Product area 28 Decision: 1999/472/EC NEN-EN 682, NEN-EN 682_1 Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) 89 Joint sealings Determination tensile stress-strain ISO 37 properties 90 In installations for the transport/ Determination hardness ISO distribution/storage gas/fuel Determination accelerated ageing and ISO intended for the supply building heating/cooling systems, from the heat resistance Determination compression set ISO and external storage Determination tear strenght small NEN-ISO 34-2 reservoir the last (Delft) test pieces reduction unit 94 the network to the inlet the heating Determination the effect liquids ISO cooling systems Determination the resistance to ozone the building cracking: ISO static strain testing 96 Determination stress relaxation in compression testing at constant temperature ISO Dutch ccreditation Council v Pagina 15 van 16
16 nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: to eplaces annex dated: Decision: 1999/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (2/5) EN 681-1, NEN-EN 681-1_1/2/3 97 Joint sealings Determination tensile stress-strain ISO 37 properties 98 In installations for the transport/ Determination hardness ISO disposal/storage water not intended Determination accelerated ageing and ISO 188:1998 for human consumption heat resistance 100 Determination compression set ISO and Determination the effect liquids ISO Determination the resistance to ozone cracking: - static strain testing 103 Determination stress relaxation in compression testing at constant temperature ISO ISO 3384:1999 Dutch ccreditation Council v Pagina 16 van 16
Scope of accreditation
WINS001 Plastics : fittings valves Dimensions : Wall thickness, diameter, angle, length EN ISO 3126 NBN T42-402 (1978) WINS002 Plastics Longitudinal reversion NBN EN ISO 2505 NBN EN 743 (1994) NBN T42-603
More informationKiwa Nederland B.V. Unit Appliances & Controls, Unit Automotive, Unit Gasdistribution Materials and Unit ExVision
nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit This annex is valid from: 15-11-2017 to 01-10-2018 Replaces annex
More informationSKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
More informationKiwa Nederland B.V. Unit Appliances & Controls, Unit Automotive, Unit Gasdistribution Materials and Unit ExVision
of Kiwa Nederland B.V. Sir Winston Churchill-laan 273 2288 EA Rijswijk The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location code Main
More informationAnnex of the certificate (Page 1/7) Accreditation Scope
Annex of the certificate (Page 1/7) As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi 38070 KAYSERİ/TÜRKİYE Phone : 90 352 321 11 06 Fax : 90 352 321 15 69 E-Mail : kayserilab@tse.org.tr
More informationBRL-K774/ Evaluation guideline. for the Kiwa product certificate for Compression fittings to tighten with matching clamping device
01-02-2012 Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Preface This evaluation guideline has been accepted by the board of experts
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Lindenlaan 41 6584 AC Molenhoek (Limburg) The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location code Main Location Lindenlaan 41 6584
More informationBRL-K17401 Comments before.. Replaces BRL-K17401 d.d. 16 April Evaluation guideline
Comments before.. Replaces d.d. 16 April 2004 Evaluation guideline For the Kiwa (technical approval-with-) product certificate for District heating: flexible piping systems with plastic medium pipe for
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 035 Issue date: 23 February 2017 16 Abbotsinch Road Grangemouth FK3 9UX Contact: Mr G Falconer Tel: +44 (0)1324 489182 Fax: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Plot 4 Halesfield 2 Telford Shropshire TF7 4QH Contact: Mr M Wass
More informationGASTEC QA. Approval Requirements 136
KE 136 January 2012 GASTEC QA Approval Requirements 136 for the GASTEC QA product certificate for Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels Foreword These GASTEC
More informationAenor Mark Specific Rules for polyethylene compounds (PE) for the manufacturing of pipes for gaseous fuels
Aenor Mark Specific Rules for polyethylene compounds (PE) for the manufacturing of pipes for gaseous fuels Note: This document is a translation of the Spanish document RP 01.37 rev 9 approved by the Plastics
More informationBRL-K14008/ Evaluation guideline. for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers
01-02-2012 Evaluation guideline for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers Preface This evaluation guideline has been accepted by the board of experts
More informationNF MARK THERMOPLASTIC MATERIAL DRAIN OR SEWER SYSTEM OPERATING WITHOUT PRESSURE
Mandated by CENTRE SCIENTIFIQUE ET TECHNIQUE DU BATIMENT Certifying Body 84 avenue Jean Jaurès Champs sur Marne F 77442 MARNE-LA-VALLEE Cedex 2 rue Francis de Pressensé F 9357 LA PLAINE SAINT DENIS Cedex
More informationCEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC
C/TC 33 - Doors, windows, shutters, building hardware and curtain walling Standard reference Title Directive 107:1980 Methods of testing windows - Mechanical test 129:1984 130:1984 179:2008 477:1995 478:1995
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationEvaluation Guideline. for the Kiwa product certificate for plastics piping systems of polyethylene for the transport of drinking water and raw water
BRL-K17105 2017-10-03 for the Kiwa product certificate for plastics piping systems of polyethylene for the transport of drinking water and raw water Preface Kiwa This evaluation guideline has been prepared
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Westervoortsedijk, Building SB 6827 AV Arnhem Nederland Location Westervoorstedijk 73, Building SB 6827 AV Arnhem The Netherlands
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationBRL-K14026/ Evaluation Guideline. for the Kiwa product certificate for Extractable shower hoses for sanitary tapware
2017-05-12 for the Kiwa product certificate for Extractable shower hoses for sanitary tapware Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which
More informationViega Technology GmbH & Co. KG
KIWA Covenant K90465/02 Issued: 01-01-2017 STATEMENT BY KIWA This Covenant of Kiwa ascertains that the: Raxinox multilayer piping system of stainless steel pipes with plastic covering and stainless steel/plastic
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene
More informationGASTEC QA. Approval Requirements 69-1
KE 69-1 May 2014 GASTEC QA Approval Requirements 69-1 for the GASTEC QA product certificate for Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings Foreword
More informationBRL-K629/03. Date Evaluation Guideline. for the Kiwa product certificate for. Backflow protection devices. Family E, Types A, B, C and D
BRL-K629/03 Date 01-02-2012 Evaluation Guideline for the Kiwa product certificate for Backflow protection devices Family E, Types A, B, C and D Preface Kiwa This (BRL) has been drawn up by Kiwa's Board
More informationEvaluation Guideline. for the KOMO (technical approval-with-) product certificate for
6 January 2014 for the KOMO (technical approval-with-) product certificate for Pre-insulated flexible plastics piping systems for warm water distribution outside buildings Validated by the Board of Experts
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Unit 3 Wednesbury One Black Country New Road Wednesbury West Midlands
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
(Chamber Commerce 32069296) (s) where activities are performed under accreditation Head Office Computerweg 2 3821 B mersfoort The Netherlands bbreviation/ location code Computerweg 2 3821 B mersfoort The
More informationBRL-K Evaluation Guideline
2016-10-06 for the Kiwa technical approval with product certificate for plastics piping systems for water supply with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated
More informationBRL-K602. Datum Evaluation Guideline
Datum 2018-09-04 for the Kiwa product certificate for valves, control valves and non-return valves for drinking water transport and drinking water distribution systems Preface This evaluation guideline
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bucknalls Lane Garston Watford Hertfordshire WD25 9BA Contact: Alvaro Enquita-Gonzalez Tel: +44 (0)1923-665350 Fax: +44 (0)1923-665452 E-Mail:
More informationLeadax B.V. Covenant K93792/02. Leadax
561/170522 Covenant K93792/02 Uitgegeven 2017-12-01 Vervangt K93792/01 Pagina 1 of 5 VERKLARING VAN KIWA With this Covenant, issued in accordance with the Kiwa Regulations for Product Certification, Kiwa
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Arthur van Schendelstraat 600 3511 MJ Utrecht The Netherlands Location Certification Scheme (TRRC-NL) Arthur van Schendelstraat
More informationISO INTERNATIONAL STANDARD. Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles
INTERNATIONAL STANDARD ISO 6182-9 First edition 2005-11-01 Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles Protection contre l'incendie Systèmes
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12666-1:2006 Plastics piping systems for nonpressure sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for non-pressure
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationGASTEC QA. Approval Requirements 6
KE 6 March 2012 GASTEC QA Approval Requirements 6 for the GASTEC QA product certificate for Plumbing fittings with ends for capillar soldering and/or thread connections Foreword These GASTEC QA Approval
More informationDNVGL-CP-0399 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0399 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationNF MARK RIGID NON-PLASTICISED PVC PIPES AND FITTINGS
Mandated by CENTRE SCIENTIFIQUE ET TECHNIQUE DU BATIMENT Certifying Body 84 avenue Jean Jaurès Champs sur Marne F 77442 MARNE-LA-VALLEE Cedex 2 11 rue Francis de Pressensé F 93571 LA PLAINE SAINT DENIS
More informationSCOPE OF ACCREDITATION
SCOPE OF ACCREDITATION Vipac Engineers and Scientists Ltd T/A Gas Technology Services Victorian Laboratory Address Details: Victorian Technology Centre 275-283 Normanby Road PORT MELBOURNE, VIC AUSTRALIA
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14541 February 2007 ICS 23.040.20; 23.040.45 English Version Plastics pipes and fittings for non-pressure applications -
More informationAnnex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
More informationTest procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
More informationEvaluation Guideline
BRL K14022 Date 2018-01-12 for the Kiwa product certificate for equipment for conditioning drinking water and/or hot tap water 478/160822 Preface This evaluation guideline has been accepted by the Kiwa
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Montrose House Lancaster Road Cressex Business Park High Wycombe Buckinghamshire HP12 3PY Contact: Mr D McKenna Tel:+ 44 (0)1494 452713 E-Mail: david.mckenna@buildcheck.co.uk Website: www.buildcheck.co.uk
More informationAnnex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-13119-01-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 18.09.2017 to 07.11.2018 Holder of certificate: IMA
More informationISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
More informationDNVGL-CP-0401 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0401 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationTelo Shower Mixing Valve TL10016CP
Telo Shower Mixing Valve TL10016CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationGASTEC QA. Approval Requirements 7. for the GASTEC QA product certificate for bendable gas meter connection pipes. KE 7 March 2012
KE 7 March 2012 GASTEC QA Approval Requirements 7 for the GASTEC QA product certificate for bendable gas meter connection pipes Foreword These GASTEC QA Approval requirements have been accepted by the
More informationHRS035-MS-022-RD 22 (559mm) 19mm x 30m 310mm Fixed Manual. HRS037-GI-019-RD 19 (483mm) 19mm x 36m 350mm Swing Manual
FIRE HOSE REEL CertIFIeD to Bs en 671-1: 1995 Certification No: Ps005704 BRITISH STANDARDS INSTITUTION APPROVAL FIRE HOSE REELS CERTIFIED TO BS EN 671 LICENCE NO. KM 51857 Certified Product AUSTRALIAN
More informationContents EN :2006+A2:2016 (E)
Contents European foreword... 6!Introduction"... 8 1 Scope... 9 2 Normative references... 10 2.1 Classification standards... 10 2.2 Test and calculation standards... 10 2.3 Other standards... 12 3 Terms
More informationNotification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC
Notification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC From : Ministry of VROM - Cluster Bouwkwaliteit Rijnstraat 8 P.O. Box 30941 2500 GX Den Haag Netherlands
More informationPlus Bath Shower Mixing Valve CP and PL30020CP
Plus Bath Shower Mixing Valve 920000CP and PL30020CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot
More informationGASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
More informationEvaluation guideline. for the Kiwa product certificate for external Polyurethane Coatings on ductile iron pipes for underground installation
01-02-2012 Evaluation guideline for the Kiwa product certificate for external Polyurethane Coatings on ductile iron pipes for underground installation Preface This evaluation guideline has been accepted
More informationKiko Bath Shower Mixing Valve KK90015CP
Kiko Bath Shower Mixing Valve KK90015CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationBRL-K618/ Evaluation Guideline. for the Kiwa product certificate for Water meters
/08 2018-01-15 for the Kiwa product certificate for Water meters Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which all relevant parties in the
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-0 Edition 3.1 2000-06 Edition 3:1998 consolidated with amendment 1:2000 Electrical apparatus for explosive gas atmospheres Part 0: General requirements IEC 2000 Copyright
More informationTransportation. Distribution
Distribution Transportation Busbar Shielded Systems type: Cast Resin Low Voltage The shielded busbar system, ISOBUSBAR, type IS isolated in polyester or epoxy resin, have been specifically developed for
More informationCALEFFI. Solar storage-to-boiler thermostatic connection kit series 01164/09 GB. Function
Solar storage-to-boiler thermostatic connection kit 6-63 series REGI STERED BS EN ISO 900:000 Cert. n FM 64 UNI EN ISO 900:000 Cert. n 0003 CLEFFI 064/09 GB Function The solar storage-to-boiler connection
More informationSUPRON 3 8 CE certificates 1 volountary certificate 12 Certificates of admittance PN-EN ISO 9001:2009
SUPRON 3 company has been founded in 1992. We are market leader in fire-fighting and safety equipment. Internal hydrants have been produced by us since 1995 r. We have 8 CE certificates for hydrants and
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office John M. Keynesplein 9 1066 EP Amsterdam The Netherlands Location Certification Scheme John M. Keynesplein 9 1066 EP Amsterdam
More informationNT 35/1 Tact Te. Tact system (Tact Automatic Filter Cleaning System) Ideal connections. High-quality, robust equipment.
NT 35/1 Tact Te The NT 35/1 Tact Te is a handy, single-motor wet and dry vacuum cleaner with powerful suction for commercial use. Features include the innovative, patented Tact System for fully automatic
More informationDeluge Shower Mixing Valve 10045CP
Deluge Shower Mixing Valve 10045CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationCLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009
P.O. Box 554 2665 ZN Bleiswijk Brandpuntlaan Zuid 16 2665 NZ Bleiswijk The Netherlands +31 88 3473 723 nederland@efectis.com OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN 13501-1:2007+A1:2009 Classification
More informationPaddy McDonnell P.I.I.E., H.Dip.SHWW., Grad. IOSH., G.I.Fire.E., MIITD.,MNFPA Technical Director Phoenix Safety Training Services
Fire Safety In Healthcare Services Conference Royal Marine Hotel, Dun Laoghaire, Co. Dublin 23 September, 2015 Understanding Fire Safety - Maintenance of Passive & Active Fire Safety Systems within Healthcare
More informationAirfield Industrial Estate Hixon Staffordshire ST18 0PF
Deluge Thermostatic Basin Mixer IT1002CP Installation and Maintenance Instructions Intatec Ltd Airfield Industrial Estate Hixon Staffordshire ST18 0PF In this procedure document we have endeavoured to
More informationTECHNICAL AND USER REQUIREMENTS FOR FIRE-FIGHTING PRESSURE HOSES FOR FIRE-FIGHTING PUMPS
Centrum Naukowo Badawcze Ochrony PrzeciwpoŜarowej (Scientific and Research Centre for Fire Protection) Nadwiślańska 213, 05-420 Józefów, Poland Telephone (+48) 22 789 11 11 Fax.: (+48) 22 769 33 45 e-mail:
More informationTECEflex the universal installation system. Secure connections for the past 20 years
TECEflex the universal installation system Secure connections for the past 20 years Contents TECEflex universal use Page 4 5 TECEflex system advantages Page 6 7 TECEflex processing Page 8 9 TECEflex fittings
More informationSPECIFICATION FOR GAPLESS METAL OXIDE DISTRIBUTION TYPE SURGE ARRESTERS WITH POLYMERIC HOUSING
SPECIFICATION FOR GAPLESS METAL OXIDE DISTRIBUTION TYPE SURGE ARRESTERS WITH POLYMERIC HOUSING Page 1 of 10 CONTENTS 1 SCOPE 2 DEFINITIONS 2.1 SURGE ARRESTER 2.2 GAPLESS METAL-OXIDE SURGE ARRESTERS 2.3
More informationNT 40/1 Tact. Robust bumper. Ergonomic push handle
NT 40/1 Tact Kärcher s NT 40/1 Tact is specially developed for use at construction sites. Featuring the tried and tested auto filter clean technology TACT and a larger, very robust container, this vacuum
More informationBS EN 1555-2:2010 BSI Standards Publication Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 2: Pipes Provided by : www.spic.ir NO COPYING WITHOUT BSI PERMISSION EXCEPT AS
More informationThe Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
More informationDeluge Concealed Shower Mixing Valve DL40010CP
Deluge Concealed Shower Mixing Valve DL40010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
More informationPlastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 2: Pipes
BSI Standards Publication Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 2: Pipes BRITISH STANDARD National foreword This British Standard is the UK implementation of EN
More informationMio Concealed Shower Mixing Valve MI40010CP
Mio Concealed Shower Mixing Valve MI40010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any
More informationThis is a preview - click here to buy the full publication. High-voltage switchgear and controlgear
IEC/PAS 62271-109 Edition 1.0 2002-07 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches PUBLICLY AVAILABLE SPECIFICATION INTERNATIONAL ELECTROTECHNICAL
More informationISO 1403 INTERNATIONAL STANDARD. Rubber hoses, textile-reinforced, for general-purpose water applications Specification
INTERNATIONAL STANDARD ISO 1403 Fourth edition 2005-02-15 Rubber hoses, textile-reinforced, for general-purpose water applications Specification Tuyaux en caoutchouc à armature textile d'usage général
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam - Specification Rubber hoses and hose assemblies for saturated steam - Specification EESTI STANDARDIKESKUS EESTI
More informationSchedule of Accreditation
Schedule of Accreditation Organisation Name Trading As INAB Reg No 6023 Contact Name Address BRE Global Assurance (Ireland) Ltd David Gall Contact Phone No +353 1 882 4344 Email Website Accreditation Standard
More informationEnzo and Enzo Deluxe Safe Touch Thermostatic Shower EN10031CP & EN10035CP
Enzo and Enzo Deluxe Safe Touch Thermostatic Shower EN10031CP & EN10035CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as
More informationKQ July 1, Evaluation Guideline
KQ 17602 July 1, 2011 Evaluation Guideline for the KiwaQuality product certificate for vulcanised rubber seals in plastic transport and storage systems for chemical liquids and gaseous fluids for industrial
More informationPressure sensors. Ex ia I / IIC T6 acc. to ATEX. Features. Description. Measuring ranges. Applications
Force Pressure Temperature Switch Pressure sensors Ex ia I / IIC T6 acc. to ATEX with internal diaphragm with front flush diaphragm Accuracy: 0,25% and 0,5 % Standard output: 4...20 ma; 2-wire system Description
More informationInstallation, operation and maintenance instructions. HRi Y1300-A
Installation, operation and maintance instructions HRi 321-601 - 800 Table of contts Geral Recommdations...4 User's Guide...5 Control Panel... 5 Appliance Description...6 Models - HRi 321 601-800... 6
More informationPlastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 3: Lining with close-fit pipes
SVENSK STANDARD SS-EN 13566-3 Fastställd 2003-01-24 Utgåva 1 Plaströrsystem för renovering av icke trycksatta dränerings- och avloppssystem i mark Del 3: Fodring med väl inpassade rör Plastics piping systems
More informationNATIONAL AND INTERNATIONAL STANDARDIZATION ACTIVITIES- RUBBER Shri. Chandrakesh Singh Scientist C Petroleum, Coal & Related Products Department
NATIONAL AND INTERNATIONAL STANDARDIZATION ACTIVITIES- RUBBER Shri. Chandrakesh Singh Scientist C Petroleum, Coal & Related Products Department Bureau of Indian Standards (BIS) Standardization in India
More informationSPEED FLEX HIGH SPEED FOLD UP DOORS
--- SPEED FLEX HIGH SPEED FOLD UP DOORS Speedd Flex fold up doors are designed to meet expectation of clients for isolation and flexibility. The fold up Door is best solution to control environmental
More informationCONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE
Page 1 of 4 CONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE DoP Number: HUK0022 1. Unique identification code of the product-type: AR880 Series Panic Bolt, AR882 Series Reversible Panic
More informationInta City Shower Mixing Valve CT20010CP
Inta City Shower Mixing Valve CT20010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationCLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009
P.O. Box 554 2665 ZN Bleiswijk Brandpuntlaan Zuid 16 2665 NZ Bleiswijk The Netherlands +31 88 3473 723 nederland@efectis.com OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN 13501-1:2007+A1:2009 Classification
More informationList of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
More informationInternal Use Only INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR ELECTRICAL OR HIGH-DENSITY MAGNETIC ANTI-SCALE OR WATER CONDITIONING APPLIANCE IGC 91-2009 1. PURPOSE 1.1 The purpose
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 13244-7 August 2003 ICS 93.030 English version Plastics piping systems for buried and above-ground pressure systems for water
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationNT 35/1 Tact Bs. The vacuum cleaner for bakeries. Heat-resistant PES flat pleated filter
NT 35/1 Tact Bs Handy, highly absorbent one-engined wet/dry vacuum cleaner with innovative, patented, auto filter clean system - TACT - and with a container volume of 35 l for all applications in the bakery
More informationHD 5/11 C Plus. Automatic pressure cut-off. Pump technology
HD 5/11 C Plus Compact cold-water high pressure cleaner. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to the compact class. 1 Automatic
More informationTerminal lugs for LV power cables with aluminum conductors
CLASS PROGRAMME Type approval DNVGL-CP-0409 Edition January 2018 Terminal lugs for LV power cables with aluminum conductors The content of this service document is the subject of intellectual property
More information