SOUTH AFRICAN NATIONAL STANDARD

Size: px
Start display at page:

Download "SOUTH AFRICAN NATIONAL STANDARD"

Transcription

1 ISBN Edition 1 EN :2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This national standard is the identical implementation of EN :2008, and is adopted with the permission of CEN, Avenue Marnix 17, B-1000 Brussels, Belgium. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS

2 Edition 1 EN :2008 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS/TC 1090, Safety of playgrounds and playground equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in August Reaffirmed and reprinted in July This document will be reviewed every five years and be reaffirmed, amended, revised or withdrawn. SABS

3 EUROPEAN STANDARD EN NORME EUROPÉENNE EUROPÄISCHE NORM May 2008 ICS Supersedes EN :1997 English Version Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation Équipements et sols d'aires de jeux - Partie 7 : Guide d'installation, contrôle, maintenance et utilisation Spielplatzgeräte und Spielplatzböden - Teil 7: Anleitung für Installation, Inspektion, Wartung und Betrieb This European Standard was approved by CEN on 25 April CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. B-1050 Brussels Ref. No. EN :2008: E

4 EN :2008 (E) Contents Page Foreword Scope Normative references Terms and definitions General Installation Inspection and maintenance Inspection schedule Operation...7 2

5 EN :2008 (E) Foreword This document (EN :2008) has been prepared by Technical Committee CEN/TC 136 Sports, playground and other recreational facilities and equipment, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn at the latest by May Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN :1997. This European Standard consists of a number of parts as follows: EN , Playground equipment and surfacing Part 1: General safety requirements and test methods EN , Playground equipment and surfacing Part 2: Additional specific safety requirements and test methods for swings EN , Playground equipment and surfacing Part 3: Additional specific safety requirements and test methods for slides EN , Playground equipment and surfacing Part 4: Additional specific safety requirements and test methods for cableways EN , Playground equipment and surfacing Part 5: Additional specific safety requirements and test methods for carousels EN , Playground equipment and surfacing Part 6: Additional specific safety requirements and test methods for rocking equipment EN , Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation EN , Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment EN , Playground equipment and surfacing Part 11: Additional specific safety requirements and test methods for spatial network This part of EN 1176 should not be used in isolation, but in conjunction with EN and EN For inflatable play equipment see EN 14960, Inflatable play equipment Safety requirements and test methods. For guidance on the maintenance of fully enclosed play equipment, see EN The principal change from the previous edition of EN is that the guidance given in this part of EN 1176 has been updated in the light of experience of use of EN :1997, for example by referring to other parts of EN 1176 when carrying out an inspection. 3

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

SANS 21-1:2009 Edition 1 EN 115-1:2008

SANS 21-1:2009 Edition 1 EN 115-1:2008 ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard

More information

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED

More information

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005 IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:

More information

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN : IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors- Connecting dimensions - Part 1: Oil burner pumps Atomizing oil burners - Oil burner pumps and oil burner

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information

CONFORMITY ASSESSMENT - SUPPLIER'S

CONFORMITY ASSESSMENT - SUPPLIER'S STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY

More information

ILNAS-EN ISO :2005

ILNAS-EN ISO :2005 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -

More information

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14175-6:2006 Fume cupboards - Part 6: Variable air volume fume cupboards Fume cupboards - Part 6: Variable air volume fume cupboards EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

ILNAS-EN ISO 2692:2006

ILNAS-EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates Characterization of waste - Determination of total dissolved solids (TDS)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15205:2007 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis Determination of hexavalent chromium in corrosion protection layers - Qualitative

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 15902:2005 Optics and optical instruments - Diffractive optics - Vocabulary Optics and optical instruments - Diffractive optics - Vocabulary EESTI STANDARDIKESKUS EESTI STANDARDI

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999 EUROPEAN STANDARD EN 50134-2 NORME EUROPÉENNE EUROPÄISCHE NORM May 1999 ICS 13.320 English version Systèmes d'alarme Systèmes d'alarme sociale Partie 2: Déclencheurs Alarm systems - Social alarm systems

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12369-2:2004 Wood-based panels - Characteristic values for structural design - Part 2: Plywwood Wood-based panels - Characteristic values for structural design - Part 2: Plywwood

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 7-2:2004 Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibrereinforced composites Plastics - Determination of temperature

More information

ALARM SYSTEMS - INTRUSION AND

ALARM SYSTEMS - INTRUSION AND IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection Water quality - Determination of soluble silicates by flow

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15182-1:2007 Hand-held branchpipes for fire service use - Part 1: Common requirements Hand-held branchpipes for fire service use - Part 1: Common requirements EESTI STANDARDIKESKUS

More information

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004) SVENSK STANDARD SS-EN ISO 5263-1:2004 Fastställd 2004-10-01 Utgåva 1 Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) Pulps Laboratory wet disintegration Part

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14073-2:2004 Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 2: Safety requirements EESTI STANDARDIKESKUS EESTI STANDARDI

More information

PLASTICS - DETERMINATION OF THE MELT

PLASTICS - DETERMINATION OF THE MELT IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1

More information

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 7200:2004 Technical product documentation - Data fields in title blocks and document headers Technical product documentation - Data fields in title blocks and document headers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11064-4:2004 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations Ergonomic design of control centres - Part 4: Layout and dimensions of workstations

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3375-004:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard Aerospace series - Cable, electrical,

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law. EN 716-2:2008/A1:2013

More information

Biological evaluation of medical devices

Biological evaluation of medical devices BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 1084:2004 Fasteners - Hot dip galvanized coatings Fasteners - Hot dip galvanized coatings EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1395-7:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed system Thermal spraying - Acceptance inspection of thermal spraying equipment

More information

Irish Standard I.S. EN :2009

Irish Standard I.S. EN :2009 Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15154-2:2006 Emergency safety showers - Part 2: Plumbed-in eye wash units Emergency safety showers - Part 2: Plumbed-in eye wash units EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

Sýnishorn General requirements for components used in drains and sewers

Sýnishorn General requirements for components used in drains and sewers ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13843:2003 Roller sports equipment - Inline-skates - Safety requirements and test methods Roller sports equipment - Inline-skates - Safety requirements and test methods EESTI STANDARDIKESKUS

More information

ILNAS-EN ISO 10684:2004

ILNAS-EN ISO 10684:2004 Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3375-007:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard Aerospace series - Cable, electrical,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 4170:2007 Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle Aerospace series - Paints and varnishes - Test method

More information

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules ÍST EN 61936-1:2010 Gildistaka 25.2.2011 ICS: 29.02 Tók við af ÍST 170:2005, sjá einnig ÍST EN 50522:2010 Power installations exceeding 1 kv a.c. - Part 1: Common rules Staðfestur af Staðlaráði Íslands

More information

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code IRISH STANDARD I.S. EN 60375:2003 ICS National Standards Authority of Ireland Dublin 9 Ireland CONVENTIONS CONCERNING ELECTRIC AND Tel: (01) 807 3800 Tel: (01) 807 3838 MAGNETIC CIRCUITS (IEC 60375:2003)

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14975:2007 Fastställd 2007-01-04 Utgåva 1 Stegar Vindsstegar

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 2486:2005 Aerospace series - Aluminium alloy AL- P2618A - Forging stock Aerospace series - Aluminium alloy AL-P2618A - Forging stock EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005. IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60079-30-2:2007 Explosive - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Explosive - Part 30-2: Electrical resistance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12593:2007 Bitumen and bituminous binders - Determination of the Fraass Breaking Point Bitumen and bituminous binders - Determination of the Fraass breaking point EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 16408:2004 Dentistry - Oral hygiene products - Oral rinses Dentistry - Oral hygiene products - Oral rinses EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14336:2004 Heating systems in buildings - Installation and commissioning of water based heating systems Heating systems in buildings - Installation and commissioning of water based

More information

OVERHEAD ELECTRICAL LINES EXCEEDING

OVERHEAD ELECTRICAL LINES EXCEEDING IRISH STANDARD I.S. EN 50423-1:2005 ICS 29.240.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV UP TO AND INCLUDING AC 45 KV Tel: +353

More information

PISTON-OPERATED VOLUMETRIC

PISTON-OPERATED VOLUMETRIC IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1004:2005 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements Mobile access and working towers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 2465:2007 Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa Rm 680 MPa - Bar for machining - 4 mm De 100 mm Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened

More information

WATER QUALITY - CRITERIA FOR

WATER QUALITY - CRITERIA FOR STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods EVS-EN 14468-2:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 9111:2006 Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) Aerospace series - Quality management systems

More information

SVENSK STANDARD SS-EN 4616:2005. Aerospace series Magnesium alloy MG-C18002 T4 Chill casting. Fastställd Utgåva 1

SVENSK STANDARD SS-EN 4616:2005. Aerospace series Magnesium alloy MG-C18002 T4 Chill casting. Fastställd Utgåva 1 SVENSK STANDARD SS-EN 4616:2005 Fastställd 2005-11-03 Utgåva 1 Aerospace series Magnesium alloy MG-C18002 T4 Chill casting ICS 49.025.15 Språk: engelska Publicerad: december 2005 Copyright SIS. Reproduction

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations Magnetic materials - Classification of surface insulations of

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 442-3:2003 Radiators and convectors - Part 3: Evaluation of conformity Radiators and convectors - Part 3: Evaluation of conformity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3979:2005 Aerospace series - Aluminium alloy AL- P8090- - O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm Aerospace series - Aluminium alloy AL-P8090- - O2 - Sheet for superplastic

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3160:2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, Rm 1 310 Mpa Aerospace series - Steel FE-PM3801

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes Test methods for fibres in concrete - Part 1: Reference concretes EESTI STANDARDIKESKUS EESTI STANDARDI

More information