NEWS. The Monthly Technology and Standards

Transcription

1

2

3

4 NEWS The Monthly Technology and Standards 2

5 _3

6 NEWS The Monthly Technology and Standards 4

7 _5

8 NEWS The Monthly Technology and Standards 6

9 _7

10 8

11 _9

12 10

13 _11

14 12

15 _13

16 14

17 _15

18 16

19 _17

20 18

21 _19

22 20

23 _21

24 22

25 The Monthly Technology & Standards _23

26 24

27 _25

28 26

29 _27

30 28

31 é _29

32 30

33 _31

34 32

35 _33

36 34

37 _35

38 36

39 _37

40 38

41 _39

42 40

43 _41

44 42

45 _43

46 44

47 _45

48 46

49 _47

50 48

51 _49

52 50

53 _51

54 52

55 _53

56 54

57 _55

58 56

59 _57

60 58

61 _59

62 60

63 _61

64 62

65 _63

66 64

67 _65

68 66

69 _67

70 68

71 _69

72 70

73 _71

74 72

75 _73

76 74

77 _75

78 76

79 _77

80 78

81 _79

82 80

83 _81

84 IULTCS ISO/DIS Leather- Chemical tests- Determination of certain azo colourants in dyed leathers (Revision of ISO/TC 17234:2003) ISO/DIS Leather- Physical and mechanical test- Determination of soiling for domestic and contract upholstery leather TC 1 ISO/DIS 5408 Screw threads- Vocabulary (Revision of ISO 5408:1983) TC 8 ISO/DIS Ships and marine technology- Marine magnetic compasses, azimuth reading devices and binnacles for steering ISO/DIS Ships and marine technology- Ship recycling management systems- Specifications for management systems for safe and environmentally sound ship recycling facilities (Revision of ISO/PAS 30000:2008) TC 12 ISO/DIS Quantities and units- Part 1: General (Revision of ISO 31-0:1992, ISO 31-0:1992/Amd 1:1998, ISO 31-0:1992/Amd 2:2005) TC 22 ISO/DIS Road vehicles- Brake lining friction materials- Standard wear test procedure for commercial vehicles with air brakes TC 23 ISO/DIS 6814 Machinery for forestry- Mobile and self-propelled machinery- Terms, definitions and classification(revision of ISO 6814:2000) ISO/DIS Tractors and machinery for agriculture and forestry- Serial control and communications data network- Part 6: Virtual terminal (Revision of ISO :2004) ISO/DIS Forestry machinery- Portable chain-saws- Non-manually actuated chain brake performance (Revision of ISO 13772:2004) ISO/DIS Tractors for agriculture and forestry- Safety- Part 2: Narrow-track and small tractors TC 24 ISO/DIS 9277 Determination of the specific surface area of solids by gas adsorption- BET method (Revision of ISO 9277:1995) TC 28 ISO/DIS Lubricants, industrial oils and related products (class L)- Family H (hydraulic systems)- Specifications for categories HH, HL, HM, HV and HG (Revision of ISO 11158:1997) TC 34 ISO/DIS 660 Animal and vegetable fats and oils- Determination of acid value and acidity (Revision of ISO 660:1996, ISO 660:1996/Amd 1:2003) ISO/DIS Quality management systems- Guidelines for the application of ISO 9001:2000 in crop production ISO/DIS Cereals and cereal products- Sampling ISO/DIS Milk products- Determination of the acidification activity of dairy cultures by continuous ph measurement (CpH) ISO/DIS Animal feeding stuffs- Determination of phytase activity TC 37 ISO/DIS Terminology and other language and content resources- Computer application 82

85 in terminology- TermBase exchange format specification (TBX) TC 38 ISO 15487:1999/ Textiles- Method for assessing appearance of apparel and other textile end DAmd 1 products after domestic washing and drying- Amendment 1 TC 39 ISO/DIS Machine tools- Work holding chucks- Vocabulary TC 42 ISO/DIS 3664 Graphic technology and photography- Viewing conditions (Revision of ISO 3664:2000) ISO/DIS Imaging materials- Digital hard copy for medical imaging- Methods for measuring permanence TC 44 ISO/DIS 6947 Welds- Working positions- Definitions of angles of slope and rotation (Revision of ISO 6947:1990) ISO/DIS Non-destructive testing of welds- Ultrasonic testing of welded joints- Acceptance levels ISO/DIS Non-destructive testing of welds- General rules for metallic materials (Revision of ISO 17635:2003) ISO/DIS Non-destructive testing of welds- Ultrasonic testing of welded joints- Methods and testing levels (Revision of ISO 17640:2005) ISO/DIS Non-destructive testing of welds- Ultrasonic testing- Characterization of indication in welds (Revision of ISO 23279:2007) TC 45 ISO/IDS Natural rubber (NR)- Evaluation procedure (Revision of ISO 1658:2994) ISO :1986/ Polymeric materials, cellular flexible- Determination of stress-strain DAmd 1 characteristics in compression- Part 1: Low-density materials- Amendment 1 ISO :1997/ Polymeric materials, cellular flexible- Determination of stress-strain DAmd 1 characteristics in compression- Part 2: High-density materials- Amendment 1 ISO/DIS 4662 Rubber- Determination of rebound resilience of vulcanizates (Revision of ISO 4662:1986) ISO 6502:1999/DAmd 1 Rubber- Guide to the use of curemeters- Amendment 1: Precision ISO/DIS Rubber gloves for general household use- Specification TC 54 ISO/DIS Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.L.] (Revision of ISO 14715:1999) TC 61 ISO/DIS Plastics- Preparation of test specimens of thermoplastic materials using mouldless technologies- Part 1: General principles, and laser sintering of specimens TC 67 ISO/DIS Petroleum and natural gas industries- Drilling and production equipment- Part 4: Practices for side-pocket mandrels and related equipment TC 98 ISO/DIS General principles on risk assessment of systems involving structures TC 110 ISO/DIS Industrial trucks- Safety requirements and verification- Part 1: Self-propelled industrial trucks, other than driverless, variable-reach trucks and burden-carrier trucks (Revision of ISO 3691:1980) TC 135 ISO/DIS Non-destructive testing- Vocabulary of terms used in penetrant testing (Revision of ISO 12706:2000) TC 138 ISO/DIS 8779 Plastics piping systems- Polyethylene (PE) pipes for irrigation- Specifications (Revision of ISO 8779:2001) _83

86 ISO/DIS Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin- Pipes with flexible joints intended to be installed using jacking techniques TC 158 ISO/DIS Gas analysis- Preparation of calibration gas mixtures using dynamic volumetric methods- Part 9: Saturation method (Revision of ISO :2001, ISO :2001/Cor:2002) TC 160 ISO/DIS Glass in building- Glass products for structural sealant glazing- Part 1: Supported and unsupported monolithic and multiple glazing TC 164 ISO/DIS Metallic materials- Method of hole expanding test (Revision of ISO/TS 16630:2003) TC 165 ISO/DIS Timber poles- Test methods- Determination of structural properties TC 172 ISO/DIS Optics and photonics- Operation microscopes- Part 2: Light hazard from operation microscopes used in ocular srugery (Revision of ISO :2001) ISO/DIS Ophthalmic instruments- Fundus cameras(revision of ISO 10940:1998) ISO/DIS Safety of machinery- Laser processing machines- Part 3: Safety requirements for noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) TC 181 ISO/DIS Safety of toys- Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use TC 182 ISO/DIS Geotechnical investigation and testing- Geohydraulic testing- Part 6: Water permeability tests in a borehole with packer and pulse-litre stimulation TC 184 ISO/DIS Industrial automation systems and integration- Parts library- Part 42: Description methodology: Methodology for structuring part families (Revision of ISO :1998, ISO :1998/Cor 1:2003) TC 197 ISO/DIS Gaseous hydrogen and hydrogen blends- Land vehicle fuel tanks TC 210 ISO/DIS Nomenclature- Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (Revision of ISO 15225:2000, ISO 15225:2000/Amd 1:2004) TC 213 ISO/DIS 3611 Geometrical product specification (GPS)- Dimensional measuring instruments- Micrometers for external measurements; Design and metrological characteristics(revision of ISO 3611:1978) TC 215 ISO/DIS Health informatics- Service Architecture- Part 1: Enterprise viewpoint ISO/DIS Health informatics- Service Architecture- Part 2: Information viewpoint ISO/DIS Health informatics- Service Architecture- Part 3: Computational viewpoint TC 227 ISO/DIS Springs- Terminology and classification of terms(revision of :1993) TC 228 ISO/DIS Recreational diving services- Requirements for enriched air nitrox training programmes ISO/DIS Recreational diving services- Requirements for introductory scuba experience programmes 84

87 TC 23 ISO/FDIS 9644 Agricultural irrigation equipment- Pressure losses in irrigation valves- Test method (Revision of ISO 9644:1993, ISO 9644:1993/Amd 1:1998) ISO/FDIS Agricultural and forestry tractors- Roll-over protective structures on narrowtrack wheeled tractors- Part 1: Front-mounted ROPS (Revision of ISO :2002) ISO/FDIS Agricultural and forestry tractors- Roll-over protective structures on narrowtrack wheeled tractors- Part 2: Rear-mounted FOPS (Revision of ISO :2002) TC 27 ISO/FDIS Hard coal and coke- Determination of ash fusibility(revision of ISO 540:1995) TC 34 ISO/FDIS Oilseed meals- Determination of oil content- Part 2: Rapid extraction method (Revision of ISO 734-2:1998) ISO/FDIS 6668 Green coffee- Preparation of samples for use in sensory analysis (Revision of ISO 6668:1991, ISO 6668:1991/Cor 1: 2000) ISO/FDIS Microbiology of food and animal feeding stuffs- Horizontal method for the enumeration of yeasts and moulds- Part 1: Colony count technique in products with water activity greater than 0,95 (Revision of ISO 7698:1990, ISO 7954:1987, ISO 13681:1995) ISO/FDIS Microbiology of food and animal feeding stuffs- Horizontal method for the enumeration of yeasts and moulds- Part 2: Colony count technique in products with water activity less than or equal to 0,95 (Revision of ISO 7698:1990, ISO 7954:1987, ISO 13681:1995) TC 39 ISO/FDIS 8525 Airborne noise emitted by machine tools- Operating conditions for metalcutting machines TC 44 ISO 24304:2005/ Welding consumables- Solid wires and rods for fusion welding of titanium and FDAmd 1 titanium alloys- Classification- Amendment :. TC 61 ISO/FDIS Plastics- Differential scanning calorimetry (DSC)- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (Revision of ISO :2002) ISO/FDIS Plastics- Film and sheeting- Determination of water vapour transmission rate- Part 4: Gas-chromatographic detection sensor method TC 67 ISO/FDIS Petroleum and natural gas industries- Cements and materials for well cementing- Part 6: Methods for determining the static gel strength of cement formulations ISO/FDIS Petroleum, petrochemical and natural gas industries- Venting of atmospheric and low-pressure storage tanks TC 92 ISO/FDIS Reaction-to-fire test- Heat release, smoke production and mass loss rate- Part 4: Measurement of heat release for determination of low level of combustibility TC 98 ISO/FDIS General principles on the design of structures for durability TC 100 ISO/FDIS Motorcycle chains- Characteristics and test methods (Revision of ISO 10190:1992) TC 106 ISO :2003/FDAmd 1 Dentistry- Rotary bur instruments- Part 2: Finishing burs- Amendment 1 ISO/FDIS Dentistry- Amalgam separators (Revision of ISO 11143:1999, ISO _85

88 11143:1999/Cor 1:2002) TC 110 ISO/FDIS Industrial trucks- Verification of stability- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (Revision of ISO 10658:1996) ISO/FDIS Industrial trucks- Verification of stability- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization ISO/FDIS Industrial trucks- Verification of stability- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated (Revision of ISO 5767:1992, ISO 5767:1992/Amd 1:1999) TC 119 ISO/FDIS 4490 Metallic powders- Determination of flow time by means of a calibrated funnel (Hall flowmeter) (Revision of ISO 4490:2001) TC 121 ISO/FDIS Terminal units for medical gas pipeline systems- Part 1: Terminal units for use with compressed medical gases and vacuum (Revision of ISO :1999) ISO/FDIS Flow-metering devices for connection to terminal units of medical gas pipeline systems (Revision of ISO 15002:2000) TC 127 ISO/FDIS Earth-moving machinery- Determination of average ground contact pressure for crawler machines TC 130 ISO/FDIS Graphic technology- Prepress digital data exchange using PDF- Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5) TC 131 ISO/FDIS Hydraulic fluid power- Filters- Multi-pass method for evaluating filtration performance of a filter element (Revision of ISO 16889:1999) ISO/FDIS Multilayer piping systems for hot and cold water installations inside buildings- Part 1: General ISO/FDIS Multilayer piping systems for hot and cold water installations inside buildings- Part 2: Pipes ISO/FDIS Multilayer piping systems for hot and cold water installations inside buildings- Part 3: Fittings ISO/FDIS Multilayer piping systems for hot and cold water installations inside buildings- Part 5: Fitness for purpose of the system TC 150 ISO/FDIS Implants for surgery- Hydroxyapatite- Part 1: Ceramic hydroxyapatite (Revision of ISO :2000) ISO/FDIS Implants for surgery- Hydroxyapatite- Part 2: Coatings of hydroxyapatite (Revision of ISO :2000) TC 159 ISO/FDIS Ergonomics of human-system interaction- Part 171: Guidance on software accessibility (Revision of ISO/TS 16071:2003) ISO/FDIS Ergonomics of the thermal environment- Cold workplaces- Risk assessment and management TC 163 ISO/FDIS Thermal insulation- Exterior insulating systems for foundations- Part 1: Specification TC 173 ISO/FDIS Wheelchairs- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs (Revision of ISO :1988) 86

89 TC 190 ISO/FDIS Soil quality- Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials TC 195 ISO/FDIS Building construction machinery and equipment- Concrete pumps- Part 2: Procedure for examination of technical parameters ISO/FIDS Building construction machinery and equipment- Mobile crushers- Part 1: Terminology and commercial specifications TC 197 ISO/FDIS Hydrogen generators using water electrolysis process- Part 1: Industrial and commercial applications (Revision of ISO/CD 22734) TC 198 ISO/FDIS Aseptic processing of health care products- Part 1: General requirements (Revision of ISO :1998) TC 202 ISO/FIDS Microbeam analysis- Scanning electron microscopy- Vocabulary TC 211 ISO/FDIS 6709 Standard representation of geographic point location by coordinates (Revision of ISO 6709:1983) TC 215 ISO/FDIS Health informatics- Information security management in health using ISO/IEC TC 220 ISO/FDIS Cryogenic vessels- Pressure-relief accessories for cryogenic service- Part 1: Reclosable pressure-relief valves JTC 1 ISO/IEC 10648:2003/ Information technology- Universal Multiple-Octet Coded Character Set (UCS)- FDAmd 4 Amendment 4: Cham, Game Tiles, and other characters ISO/IEC FDIS Information technology- Security techniques- Key management- Part 3: Mechanism using asymmetric techniques (Revision of ISO/IEC :1999, ISO/IEC :2002) ISO/IEC :2005/ Information technology- Coding of audio-visual objects- Part 3: Audio- FDAmd 9 Amendment 9: Enhanced low delay AAC ISO/IEC FDIS Information technology- Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized (Revision of ISO/IEC :2004) ISO/IEC : Information technology- MPEG video technologies- Part 1: Accuracy 2006/FDAmd 1 requirements for implementation of integer-output 8x8 inverse discrete cosine transform- Amendment 1: Software for integer IDCT accuracy testing ISO/IEC FDIS Information technology- MPEG video technologies- Part 2: Fixed-point 8x inverse discrete cosine transform and discrete cosine transform ISO/IEC FDIS Information technology- Biometric profiles for interoperability and data interchange- Part 2: Physical access control for employees at airports ISO/IEC FDIS Information technology- Security techniques- Test requirements for cryptographic modules ISO/IEC FDIS Software engineering- Certification of software engineering professionals- Comparison framework ISO/IEC FDIS Information technology- Information security management guidelines for telecommunications _87

90 20/933/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-10: Test for vertical flame Ed.1.0 spread of vertically-mounted bunched wires or cables- Apparatus 20/934/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-22: Test for vertical flame Ed.1.0 spread of vertically-mounted bunched wires or cables- Category A 20/935/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-23: Test for vertical flame Ed. 1.0 spread of vertically-mounted bunched wires or cables- Category B 20/936/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-24: Test for vertical flame Ed. 1.0 spread of vertically-mountedbunched wires or cables- Category C 20/937/CDV Amendment 1 to IEC Tests on electric cables under fire conditions- Part 3-25: Test for vertical flame Ed. 1.0 spread of vertically-mounted bunched wires or cables- Category D 20/938/CDV IEC Ed. 3.0 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation 23E/650/FDIS IEC Ed.1 Circuit breakers- Switched protective earth portable residual current devices for class I and battery powered vehicle applications 42/236/CDV IEC Ed. 3.0 High-voltage test techniques- Part 1: General definitions and test requirements 51/928A/CDV REVISED Amendment 1 Calculation of the effective parameters of magnetic piece parts to IEC 60205, Ed 3 57/930/FDIS IEC Ed.1 Application integration at electric utilities- System interfaces for distribution management- Part 13: CIM RDF Model exchange format for distribution 61F/744/CDV IEC Ed. 5.0 Hand-held motor-operated electric tools- Safety- Part 2-5: Particular requirements for circular saws 61F/747/CDV IEC A1 Ed 2.0 Hand-held motor-operated electric tools- Safety- Part 2-13: Particular requirements for chain saws 61F/748/CDV IEC A1 Ed 2.0 Hand-held motor-operated electric tools-part 2-15: Particular requirements for hedge trimmers 72/766/CDV IEC Ed.4 Automatic electrical controls for household and similar use - Part 1: General requirements 78/741/FDIS IEC Ed.2 Live working- Portable equipment for earthing or earthing and short-circuiting 86C/832/CDV IEC Ed. 1.0 Dynamic modules- Test methods- Part 5-1: Dynamic Gain tilt equalizer- Response time measurement 86C/833/DTR IEC TR Ed. 1.0 Fibre optic active components and devices- Reliability standards- Part 2: Technical report on laser module degradation 95/231/CDV IEC Ed.1 Measuring relays and protection equipment- Part 1: Common requirements 100/1386/CDV IEC Multimedia systems and equipment- Multimedia e-publishing and e-books- Generic format for e-publishing (TA10) CIS/A/786/FDIS Amendment 2 to Specification for radio disturbance and immunity measuring apparatus and CISPR Ed.2 methods- Part 1-4: Radio disturbance and immunity measuring apparatus- Ancillary equipment- Radiated disturbances 88

91 34B/1381/FDIS IEC A1 Ed.8 Edison screw lampholders 34B/1382/FDIS IEC A1 Ed.2 Barrel thread for lampholders with shade holder ring 34B/1383/FDIS IEC Ed.7 Lampholders for tubular fluorescent lamps and starterholders 34B/1384/FDIS IEC A1 Ed.4 Miscellaneous lampholders- Part 1: General requirements and tests 34B/1385/FDIS IEC Ed.3 Bayonet lampholders 48B/1885/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-3: Mechanical tests on contacts and terminations- Test 16c: Contact-bending strength 48B/1886/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-5: Mechanical tests on contacts and terminations- Test 16e: Gauge retention force (resilient contacts) 48B/1887/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-6: Mechanical tests on contacts and terminations- Test 16f: Robustness of terminations 48B/1888/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-7: Mechanical tests on contacts and terminations- Test 16g: Measurement of contact deformation after crimping 48B/1889/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-14: Mechanical tests on contacts and terminations- Test 16n: Bending strength, fixed male tabs 48B/1890/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-16: Mechanical tests on contacts and terminations- Test 16p: Torsional strength, fixed male tabs 48B/1891/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part 16-17: Mechanical tests on contacts and terminations- Test 16q: Tensile and compressive strength, fixed male tabs 62D/682/CDV IEC Ed.3 Medical electrical equipment- Part 2-18: Particular requirements for basic safety and essential performance of endoscopic equipment 86A/1215/FDIS IEC Ed. 1.0 Optical fibre cables- Part 2-41: Indoor cables- Product specification for simplex and duplex buffered A4 fibres 100/1386A/CDV IEC Multimedia systems and equipment- Multimedia e-publishing and e-books- Generic format for e-publishing (TA10) CIS/B/459/CDV CISPR 11 f2 Ed5 Selection criteria for the minimum separation distance between EUT and measurement antenna- Proposal to replace the class criterion currently used in CISPR 11 by a size-of-equipmentcriterion 15/442/FDIS IEC Ed. 3.0 Combined flexible materials for electrical insulation- Part 3: Specifications for individual materials 40/1915/FDIS IEC Fixed capacitors for use in electronic equipment- Part 1: Generic specification 47E/361/CDV IEC , Ed. 2 Semiconductor devices- Part 14-1: Semiconductor sensors- Generic _89

92 specification for sensors 47E/362/CDV IEC , Ed. 2 Semiconductor devices- Part 14-3: Semiconductor sensors- Pressure sensors 48B/1892/FDIS IEC Ed. 1.0 Connectors for electronic equipment- Tests and measurements- Part : Measurement setup, test and reference arrangements and measurements for connectors according to IEC Tests 26a to 26g 48B/1893/FDIS IEC Ed. 2.0 Connectors for electronic equipment- Product requirements- Part 2-101: Circular connectors- Detail specification for M12 connectors with screw-locking 59D/343/CDV IEC Ed. 5.0 Clothes washing machines for household use- Methods for measuring the performance 61/3637/FDIS IEC A2 Ed 5.0 Household and similar electrical appliances- Safety- Part 2-8: Particular requirements for shavers, hair clippers and similar appliances 62C/445/CDV IEC A1 Ed.1 Medical electrical equipment- Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology 86A/1219/CDV IEC Ed. 2.0 Optical fibre cables- Part 3-21: Outdoor optical fibre cables- Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling 86A/1220/CDV IEC Ed. 2.0 Optical fibre cables- Part 3-12: Outdoor optical fibre cables- Product specification for duct and directly buried optical telecommunication cables for use in premises cabling 34C/833/CDV IEC A1 Ed.2 Lamp controlgear- Part 1: General and safety requirements 17B/1599/CDV IEC Ed. 3.0 Low-voltage switchgear and controlgear- Part 4-1: Contactors and motorstarters- Electromechanical contactors and motor-starters 25/382/FDIS IEC Ed.1 Electric power engineering- Modal components in three-phase AC systems- Quantities and transformations 26/381/CDV IEC Ed.2 Arc welding equipment- Part 8: Gas consoles for welding and plasma cutting systems 48B/1902/CDV IEC Ed. 1.0 Connectors for electronic equipment- Product requirements- Part 3-117: Rectangular connectors- Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC series interface- Variant 14 related to IEC Push pull coupling 51/931/CDV IEC Ed.1 Ferrite cores- Guide on the limits of surface irregularities- Part 5: Planar-cores 64/1641/FDIS CEI Ed.3 Installations électriques à basse tension- Partie 4-43: Protection pour assurer la sécurité- Protection contre les surintensités 88/316/CDV IEC Ed.1 Wind turbines- Part 25-6: Communications for monitoring and control of wind power plants- Logical node classes and data classes for condition monitoring 91/766/CDV IEC , Ed. 1 Printed board assemblies- Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA 108/297/CDV IEC A1 Ed 2.0 Information technology equipment- Safety- Part 1: General requirements 90

93 _91

94 92

95 _93

96 94

97 _95

98 96

99 _97

100 98

101 _99

102 100

103 _101

104 102

105 _103

106 104

107

108