Specification for testing to be conducted at periodic surveillance of products and systems

Transcription

1 Specification for testing to be conducted at periodic surveillance of products and systems RD_082, Issue 03 This guide describes the specification for testing to be conducted at periodic surveillance of products and systems No rights may be derived from the text of this document. Copyright 2014, Telefication tel: +31 (0) Telefication B.V. Chamber of commerce: fax: +31 (0) Edisonstraat 12A ABN-AMRO: , Swift code: ABNANL2A PK Zevenaar VAT: NL B01 The Netherlands

2 Certification rules Page 2 of 9 FOREWORD: The CERTALARM Quality Mark has been established to provide a single Quality Mark, recognised throughout Europe, for products, systems and services in the Electrical and Electronic Fire & Life Safety and Security industries. It provides assurance to the specifier and user that the product, system or service consistently meets all requirements of the relevant European or other specified standards. The CERTALARM Mark is owned by CERTALARM AISBL and administered on their behalf by CERTALARM Management. The CERTALARM System is made available to Certification Bodies who wish to offer the CERTALARM Mark to clients desiring to demonstrate the compliance of their products, systems or services to the relevant standards by conformity testing, assessment of the quality management system applicable to the manufacture / provision of that product, system or service and associated inspection of the manufacture or service provision. Whilst provision has been made for the expansion of the CERTALARM Scheme to include services and additional product types, appropriate standards will not be included in this document until preparations are made for operations to extend into that area. Page 2 of 9

3 Certification rules Page 3 of 9 Revision record sheet NOTE: The person who initiated the document or modified the document is responsible for maintaining this record sheet Revision Section number Page number Date Remark(s) issued by 1 New document AG Section 4 modified AG Section 4 modified: add sampling requirements WJJ ,6, Updated to R03 version 02 WJJ Added section 8 according R03 version 02 WJJ Issued/modified by : Willem Jan Jong Function : Manager Product Certification Revision :3 Date : Verified by : Michel Wouters Function : Director Telefication Certification Date : Released by :Axel Gase Function :Quality assurance manager Date of release : Page 3 of 9

4 Certification rules Page 4 of 9 CONTENTS: 1. SCOPE NORMATIVE REFERENCES GENERAL SAMPLE CRITERIA AND REVIEW CRITERIA OF TEST RESULTS FIRE DETECTION & ALARM SYSTEMS AND PRODUCTS INTRUSION & HOLD UP ALARM SYSTEMS AND PRODUCTS ALARM TRANSMISSION SYSTEMS SOCIAL ALARM SYSTEMS... 9 Page 4 of 9

5 Certification rules Page 5 of 9 1. SCOPE This document specifies the tests to be conducted during periodic surveillance procedures of products certified under the CERTALARM scheme and is e.g. applicable for continuous compliance system V These are carried out at the intervals specified in CERTALARM System: Certification Rules - Part 2: Standards specified for various products, systems and services (RD_081 CertAlarm Scheme standards and regulations). In case of the continuous compliance scheme such as the system V scheme the surveillance interval will be 2 years. 2. NORMATIVE REFERENCES The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CERTALARM System: Certification Rules - Part 1 CERTALARM System: Certification Rules - Part 2 CERTALARM System: Certification Rules - Part 4 Definition of procedures and conditions for testing and certification Standards specified for various products, systems and services Procedures for confirmation of continued consistency of results 3. General Unless otherwise stated, the version of each standard that is referenced by CERTALARM System: Certification Rules - Part 2: Standards specified for various products, systems and services shall apply, including any referenced amendments, Where sensitivity parameters are variable, the certifier may specify the setting to be used according to previous results. On all samples the following checks shall be carried out. This may be performed as part of a factory production control audit. Checks: Technical Documentation, including Bill of Material (BoM) PCB layout version Firmware / software version(s) Bill of Material (BoM) Documentation (including change records) Marking / labelling Visual inspection of the sample with respect to build, assembly of the unit. If the above does not identify any problems requiring specific attention, the following tests will be carried out at the specified surveillance re-test interval. The tests are identified by clause number from the applicable standard. Additional tests may be required if the product has been modified or other problems are identified. 4. Sample criteria and review criteria of test results Sample criteria In accordance of CERTALARM rules part 1, the samples for re-testing have to be taken randomly. To combine this with samples to be supplied by the manufacturer, the following procedure has to be followed. The assigned product assessor has to request from the manufacturer the produced specimen list (list of all produced serial numbers) which is still on stock. From this list the assessor will pick a random sample. This sample will be supplied by the manufacturer for the surveillance. Review Criteria In accordance to the defined standard (as shown in the tables), the tests will be performed at 1 product (sample from the market). In case the test results are within the limits, the tests will be judged as ok. In case the product failed during the test, the client will be requested to perform a root cause investigation (results of investigation should be available within 7 working days). In case the problem is not found the client will be informed to stop selling the product and to determine the size of the Page 5 of 9

6 Certification rules Page 6 of 9 problem (re-call). In relation to suspension and withdrawal of the certificate(s), information criteria are defined in section 4.4 of RD_070 Conformity assessment procedures for the alarm components scheme. 5. Fire detection & alarm systems and products Standard Component Requirement EN54-2 Control & indicating equipment 15.2 Functional test conduct this test. EN54-3 Sounder a/b/c Sound level meets specs of manufacturer for all specified directions and within sound level range specified in EN54-3 EN54-4 Power supply Table 1 ( 3 9) Full functional test EN54-5 Heat detector 5.8 Reproducibility within limits of standard (no comparison with previous results) EN 54-7 Smoke detector 5.2 Repeatability test, restricted to three readings only EN Flame detector 5.5 Fire sensitivity for n- heptane fire EN54-11 Manual call point 5.2 Operational performance test EN Linear smoke detector 5.3 Repeatability test, omitting 7-day interval test EN54-13 System compatibility Assessment See Certalarm System only Rules Part 2 clause 6.2.1: (4.1) Periodic surveillance of system components will be carried out by verification of the ongoing certified status of all individual components, one tone, max and min sound levels conduct this test. 1 sensitivity level 1 parameter set least sensitive parameter set 1 parameter set - Page 6 of 9

7 Certification rules Page 7 of 9 EN54-16 Voice Alarm Control Equipment 16.4 & 16.7 Output power & frequency response conduct this test. EN54-17 Short circuit isolators Functional test EN54-18 Input/output devices Functional test 1 EN Aspirating smoke detectors EN Visual Alarm Devices TBD Repeatability test, restricted to three readings only 6.2 Repeatability test, restricted to three readings only EN Loudspeakers 5.2 Reproducibility (requires freq.- curve, sound level and sensitivity). EN EN Components using radio links Electrical control & delay device 1 1 one frequency sweep Test for immunity to site attenuation Functional tests conduct this test. EN14604 Smoke alarm devices Repeatability test, restricted to three readings only EN CO detectors TBD 1 parameter set 6. INTRUSION & HOLD UP ALARM SYSTEMS AND PRODUCTS Standard Component Security Grade Standard Component Requirement Requirement - All products All See relevant standard EN , EN , EN , EN EN Movement detectors Magnetic Contacts Resistance to and detection of unauthorized access to the housing All Detection across and detection range tests 3 and / Anti-masking Significant reduction of range All Make / break approach / removal distances 3 and Immunity to magnetic interference Matched coded pairs conduct test. conduct test. conduct test. Page 7 of 9

8 Certification rules Page 8 of 9 Standard Component Security Grade EN CIE All Access Levels, /3/4/5 Tamper protection and detection Timing performance (STEP 1 only) to (STEPS 1 to 7) Event recording (Step 7 reduce to 5 minutes) 3 and Monitoring of processor Penetration of housing ** Significant reduction of range ACE All /3/4/5 Tamper protection and detection Penetration of housing ** Standard Component Security Grade EN Warning devices Requirement Requirement to conduct tests all types peripheral connected ALL 6.4 Acoustic output level, Storage device operating time 6.5 (EXCEPT Tamper protection, 6.5.4, 6.5.5) detection and security / Response to trigger command 3 and Removal from mounting detection Penetration of housing to conduct tests EN Power Supplies All 7.13 Charging performance / SD recharging 7.15 Short circuit protection Tamper protection and detection 3 and Deep discharge protection 7.8 Storage device failure Penetration of housing **, to conduct tests EN Equipment using radio interconnections All Immunity to attenuation Immunity to interference minimum conduct this test EN Security fog device Full test minimum conduct this test ** - where applicable to manufacturer s claim for product Page 8 of 9

9 Certification rules Page 9 of 9 7. Alarm transmission systems Standard Component Requirement EN SPT 6.1 Functional test, Interface interconnections minimum 6.7 Enclosure EN54-21 Alarm transmission and fault warning routing equipment, minimum 8. Social Alarm systems Standard Component Require-ment EN :2000 EN :2004 EN :2001 EN :2004 Social alarms trigger devices Social alarms interconnection and communication Social alarms local unit and controller Social alarms interconnection and communication Page 9 of 9