TYPE APPROVAL CERTIFICATE
|
|
- Benedict O’Connor’
- 5 years ago
- Views:
Transcription
1 TYPE APPROVAL CERTIFICATE Certificate No: TAA00001CD This is to certify: That the Programmable Controller with type designation(s) SIPLUS Series Issued to Siemens AG Fürth, Germany is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft Application : Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. Temperature B / D* Humidity B Vibration A EMC A* / B* Enclosure Enclosure Required protection according to DNV Rules shall be provided upon installation on board * see Application/Limitation Issued at Hamburg on This Certificate is valid until DNV GL local station: Augsburg for DNV GL Approval Engineer: Heinz Scheffler Joannis Papanuskas Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 251 Revision: Page 1 of 6 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
2 Product description SIPLUS S CPU 1212C 6AG CPU 1214C 6AG CPU 1215C 6AG SM AG SM AG SM AG SM AG SM AG SM AG SB - Signal boards SB AG SB AG SB AG SB AG SB AG CM - Communication Modules CB/CM AG CM AG CM AG CSM AG Power supply modules PM AG SIPLUS S F CPU 1214FC 6AG AF40-5XB0 CPU 1214FC 6AG HF40-5XB0 SIPLUS ET200MP IM - Interface Modules IM 155 6AG SIPLUS S PM Load Power Supplies PM 6AG PM 6AG PS System Power Supplies PS 6AG PS 6AG Form code: TA 251 Revision: Page 2 of 6
3 CPU AG CPU AG CPU AG CPU AG SM 521 6AG SM 522 6AG SM 531 6AG SM 532 6AG CM - Communication Modules CM 540 6AG CM 541 6AG CM 542 6AG TM Technology Modules TM 550 6AG TM 551 6AG SIPLUS S F CPU 1518F 6AG1518-4FP00-4AB0 SIPLUS ET200SP IM - Interface Modules IM 155 6AG CPU AG CPU AG SM DI 6AG SM DO 6AG SM AI 6AG SM AO 6AG CM - Communication Modules CM 137 6AG CM 545 6AG TM Technology Modules TM 138 6AG BU/ BA Base units/ Bus adapter/ Server modules BU/ BA 6AG Form code: TA 251 Revision: Page 3 of 6
4 SIPLUS ET200SP-F SM F-DI 6AG1136-6BA00-2CA0 SM F-DQ 6AG1136-6DB00-2CA0 SM F-RQ 6AG1136-6RA00-2BF0 PM - Power Modules PM F-PM-E 6AG1136-6PA00-2BC0 SIPLUS HMI SIPLUS Key Panel KP8 PN SIPLUS Basic Panel KTP400 Basic KTP700 Basic DP KTP700 Basic KTP900 Basic KTP1200 Basic DP KTP1200 Basic SIPLUS Comfort Panel KP/ TP700 KP/ TP900 KP/ TP1200 KP/ KTP400 KP/ KTP400 KP/ TP700 KP/ TP900 KP/ TP1200 SIPLUS Outdoor Panel TP700 Comfort Outdoor TP1500 Comfort Outdoor SIPLUS Power Supplies SIPLUS PS PSU 200M 5A 6AG1333-3BA10-7AA0 PSU 100S 6AG1334-2BA20-4AA0 PSU 200M 10A 6AG1334-3BA10-7AA0 PSU 300S 10A 6AG1434-2BA10-7AA0 PSU 300S 20A 6AG1436-2BA10-7AA0 PSU AG1437-3BA10-7AA0 PSE 200U 3A 6AG1961-2BA31-7AA0 PSE 200U 10A 6AG1961-2BA41-7AA0 PS MODULAR 6AG1961-3BA01-7AA0 PS E202U 6AG1961-3BA21-4AX0 PS E202U 6AG1961-3BA21-7AX0 Form code: TA 251 Revision: Page 4 of 6
5 Approval conditions The Type Approval covers hardware listed under Product description. When the hardware is used in applications to be classed by DNV, documentation for the actual application is to be submitted for approval by the manufacturer of the application system in each case. Reference is made to DNV Rules for Ships Pt.4 Ch.9 Control and Monitoring Systems. Product certificate Each delivery of the application system is to be certified according to Pt.4 Ch.9 Sec.1. The certification test is to be performed at the manufacturer of the application system according to an approved test program before the system is shipped to the yard. After the certification the clause for application software control will be put into force. Clause for application software control All changes in software are to be recorded as long as the system is in use on board. The records of all changes are to be forwarded to DNV for evaluation and approval. Major changes in the software are to be approved before being installed in the computer. Application/Limitation * Temperatur D: SIPLUS S7-1200, TP700 Comfort Outdoor; TP1500 Comfort Outdoor. * EMC Surge Immunity: External Protective circuits required for DC systems. See the current System Manual for recommendations. * EMC B: System SIPLUS S7-1200, SIPLUS S7-1500, SIPLUS ET200SP/MP, SIPLUS HMI, SIPLUS Power Supplies for use on bridge and deck zone, the power supply lines are to be protected by filter type B84113C (manufacturer by Epcos or equivalent) Tested with: I=3A, C=2x0,47uF+2x4700pF, L=4x4,7mH. Enclosure class C: SIPLUS Outdoor Panel (when mounted) front IP66 and rear IP20 Type Approval documentation Test reports: List of Test Reoprts 18-E BM-A01 Documents: List of Technical datasheets/equipment manuals 18-E BM-B01 Tests carried out Applicable tests according to Class Guideline DNVGL-CG-0339, November Marking of product The products to be marked with: Model name Manufacturer name Serial number Form code: TA 251 Revision: Page 5 of 6
6 Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no alterations are made to the product design or choice of systems, software versions, components and/or materials. The main elements of the assessment are: Ensure that type approved documentation is available Inspection of factory samples, selected at random from the production line (where practicable) Review of production and inspection routines, including test records from product sample tests and control routines Ensuring that systems, software versions, components and/or materials used comply with type approved documents and/or referenced system, software, component and material specifications Review of possible changes in design of systems, software versions, components, materials and/or performance, and make sure that such changes do not affect the type approval given Ensuring traceability between manufacturer s product type marking and the type approval certificate Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be performed at renewal of the certificate. END OF CERTIFICATE Form code: TA 251 Revision: Page 6 of 6
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000120 Revision No: 1 This is to certify: That the Programmable Controller with type designation(s) Fail-safe Programmable Logic Controller and Fail-safe Modules
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA00001MM Revision No: 1 This is to certify: That the Control and Monitoring System with type designation(s) AHD-IMAC Issued to Böning Automationstechnologie GmbH & Co.KG Ganderkesee,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000W1 This is to certify: That the Programmable Electronic System with type designation(s) AC500-eCo / S500-eCo Issued to ABB Automation Products GmbH Heidelberg,
More informationEU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA000000V This Certificate is issued to R. Stahl Schaltgeräte GmbH Waldenburg, Germany for Computers and Programmable Logic Controllers
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14297 File No: 862.50 Job Id: 262.1-007956-6 This is to certify: That the Programmable Electronic System with type designation(s) AC500-eCo Issued to ABB Automation
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE00001BS Revision No: 1 This is to certify: That the Frequency Converter with type designation(s) SINAMICS S120 Cabinet s, Liquid Cooled, Application Marine
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000000G Revision No: 1 This is to certify: That the Generator Automation System with type designation(s) GENSYS MARINE, GENSYS 2.0 MARINE, MASTER 2.0 MARINE,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000VH Revision No: 1 This is to certify: That the Power Management System with type designation(s) Delomatic 4 Issued to DEIF A/S Skive, Midtjylland, Denmark
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000VH This is to certify: That the Power Management System with type designation(s) Delomatic 4 Issued to DEIF A/S SKIVE, Denmark is found to comply with
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00001K7 This is to certify: That the Power Management System with type designation(s) Multi-line 300 Issued to DEIF A/S Skive, Midtjylland, Denmark is found
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000W5 Revision No: 2 This is to certify: That the Control and Monitoring System with type designation(s) K-Chief 700 and K-Safe Issued to KONGSBERG MARITIME
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-14378 This is to certify: That the Pilot Device with type designation(s) Pilot device Issued to BARTEC GmbH BAD MERGENTHEIM, Germany is found to comply with
More informationDET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. A-10733 This Certificate consists of 7 pages This is to certify that the Diesel engine safety, control and alarm system with type designations
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-13480 File No: 822.21 Job Id: 262.1-008042-6 This is to certify: That the Frequency Converter with type designation(s) Emotron FDU 2.0 Issued to CG Drives &
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000N2 This is to certify: That the Control and Monitoring System with type designation(s) G-DATA/ Mega-Guard/ Maxi-Guard Issued to Praxis Automation Technology
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TAP00000ZS Revision No: 2 This is to certify: That the allast Water Management System with type designation(s) Ecochlor allast Water Management System Issued to Ecochlor, Inc. Maynard,
More informationHYUNDAI HEAVY INDUSTRIES CO., LTD.
Certificate No.: 52700-2009-AE-KOR-RvA Initial Certification Date: 07 March, 1997 Valid: 16 March, 2015 16 March, 2018 This is to certify that the management system of CO., LTD. 1000, Bangeojinsunhwando-ro,
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TP00000ZS Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) Ecochlor Ballast Water Management System Issued to Ecochlor, Inc. Maynard
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TAP000006X Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) Optimarin Ballast System, Optimarin Ballast System Ex Issued to Optimarin
More informationFor the compliance with the resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TP00000ZS This is to certify: That the Ballast Water Management System with type designation(s) Ecochlor Ballast Water Management System Issued to Ecochlor, Inc. Maynard M, United States
More informationLow-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
More informationIssued to DISTRIBUIDORA INTERNACIONAL CARMEN, S.A -DICSA- Zaragoza Zaragoza, Spain
Certificate No: TAP00000MD This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Trale/Triagle hoses with DICSA stainless/carbon
More informationDNVGL-CP-0398 Edition December 2015
CLASS PROGRAMME Type approval DNVGL-CP-0398 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationDNVGL-CP-0407 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0407 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE00000GG Revision No: 2 This is to certify: That the Data transmission cables and systems with type designation(s) MGD Cat 3, MGD Cat 5, Cat 5e, MGD cat 6, Cat
More informationDNVGL-CP-0402 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0402 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationTerminal lugs for LV power cables with aluminum conductors
CLASS PROGRAMME Type approval DNVGL-CP-0409 Edition January 2018 Terminal lugs for LV power cables with aluminum conductors The content of this service document is the subject of intellectual property
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-14362 This is to certify that the Ballast Water Management System with type designation(s) NK-O3-BlueBallast Water Management System Manufactured
More informationSOUND RECEPTION SYSTEM
STANDARD FOR CERTIFICATION No. 2.9 SOUND RECEPTION SYSTEM APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and independent foundation
More informationDNVGL-CP-0399 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0399 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationIndicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME NO. 844.40 - MED A1/4.20-4.21-4.22-4.9 Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch FEBRUARY 2012
More informationNotified Body No.: 0575
Certificate No: MEDB00001BE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive (EU) 2015/559, issued as "Forskrift om Skipsutstyr" by the Norwegian
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB00002VN Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED). This Certificate is issued by DNV GL SE based on the
More informationDNVGL-CP-0401 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0401 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000014A Revision No: 5 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationSIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
STANDARD FOR CERTIFICATION No. 2.9 SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and
More informationGlass fibre rovings - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0082 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationNotified Body No.: 0575 G U A D N L. SJq
ONV.GL XAMINA i ION C.R i 11-ICA Certificate No: MEDB00000AT Application of: Council Directive 96/98/EC of 20 December 1996 an Marine Equipment as amended by directive 2014/93/EU, issued as "Forskrift
More informationNotified Body No.: 0575
Certificate No: MEDB00001BD Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive (EU) 2015/559, issued as "Forskrift om Skipsutstyr" by the Norwegian
More informationShipboard incinerators with capacities up to 4000 kw
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY
More informationNotified Body No.: 0098
Certificate No: MEDB00003SJ Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED). This Certificate is issued by DNV GL SE based on the notification of the Federal Maritime and
More informationCoatings for protection of FRP structures with heavy rain erosion loads
CLASS PROGRAMME Type approval DNVGL-CP-0424 Edition May 2016 Coatings for protection of FRP structures with heavy rain erosion loads The content of this service document is the subject of intellectual
More informationProduct Information to the manual
Product Information to the manual Distributed I/O device ET 200iS, Version 10/2001 Introduction This product information contains fixes and additional information relevant to the user manual Distributed
More informationFire control panels FC360
Cerberus TM FIT Fire control panels FC360 FC361-ZZ, FC361-ZA, FC361-YZ, FC361-YA Fire control panels (1-loop) for addressable peripheral devices with integrated operating unit One loop with 126 addresses
More informationModel 144H. Product Data Sheet , Rev DB February Content
Rosemount 144 PC-Programmable Temperature Transmitter Provides an installation-ready solution for temperature monitoring applications using Complete Point Solutions (CPS) Increases measurement accuracy
More informationCERTIFICATE OF COMPLIANCE
CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT This certificate is issued for the following equipment: I. Nonincendive (Div. 2) Version Nil I /2/ ABCD / T* NI/I /2/ IIC
More informationFDOOT241-A9-Ex Multisensor fire detector
FDOOT241-A9-Ex Multisensor fire detector ASAtechnology TM For potentially explosive areas Sinteso Collective Signal processing with ASAtechnology Multiple protocol detector (collective/fdnet-ex) Event-controlled
More informationConnection of CET4-AP to Siemens ET 200S
Connection of CET4-AP to Siemens ET 200S Content Guard locking power on applied spring released according to EN ISO 14119 (open-circuit current principle)... 2 Components/modules used... 2 EUCHNER... 2
More informationGROUNDING AVOIDANCE SYSTEM (GAS)
STANDARD FOR CERTIFICATION No. 2.9 GROUNDING AVOIDANCE SYSTEM (GAS) JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationFDOOT241-9, FDOOT241-A, FDO241, FDT241
Sinteso S-LINE FDOOT241-9, FDOOT241-A, FDO241, FDT241 Automatic fire detectors For the automatically addressed detector bus FDnet The ideal fire detector for every application Line separators for uninterrupted
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationSAFETY/ SECURITY - FIRE FIGHTING INTEGRATED SYSTEMS
SAFETY/ SECURITY - FIRE FIGHTING INTEGRATED SYSTEMS Standards and certifications In order to be used in fire fighting systems, the panel S81-HS has been certified in an harmonised European laboratory,
More informationSHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS
STANDARD FOR CERTIFICATION No. 2.9 SHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS OCTOBER 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD
More informationModel 144H. Product Data Sheet , Rev DB February Content
Rosemount 144 PC-Programmable Temperature Transmitter Provides an installation-ready solution for temperature monitoring applications using Complete Point Solutions (CPS) Increases measurement accuracy
More informationGas Controller Module GC-06
Page 1 Oct. 2015/2 Measuring, warning and controlling module for toxic, combustible and refrigerant gases and vapours. The gas controller series GC-06 is designed in accordance with the standard EN 50545-1.
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
LRV02..206.09 EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a notified body under the terms of the Merchant Shipping (Marine
More informationOOH740, OOHC740. Cerberus PRO. Automatic fire detectors
Cerberus PRO OOH740, OOHC740 Automatic fire detectors ASAtechnology For the automatically addressable detector bus C-NET collective / conventional (OOH740 only) Signal processing with ASAtechnology Event-controlled
More informationhttps://support.industry.siemens.com/cs/ww/en/view/
Reading out the S7-1500 CPU Alarm using "" and sending it to an Alarm System TIA Portal, S7-1500, OPC UA Client https://support.industry.siemens.com/cs/ww/en/view/109748168 Siemens Industry Online Support
More informationFor Complete Fire and Gas Solutions
Industrial Fire For Complete Fire and Gas Solutions 2 The Total Package What do you need from an integrated fire and gas system? In industrial fire and gas environments it s important to have a reliable
More informationOOH740-A9-Ex Multisensor fire detector
OOH740-A9-Ex Multisensor fire detector ASAtechnology TM For potentially explosive areas Cerberus PRO Collective Signal processing with ASAtechnology Multiple protocol detector (collective/c-net-ex) Event-controlled
More informationMulti-Gas-Controller MGC2
Page 1 Aug. 2018 Gas measuring, monitoring and warning controller based on state-of-the-art micro-technology for continuous monitoring of the ambient air to detect toxic and combustible gases, refrigerants
More informationFC2040. Fire control panel. Sinteso. FS20 series, MP6
FC2040 Sinteso Fire control panel FS20 series, MP6 Compact, pre-assembled, microprocessor-controlled fire control panel with integrated operating unit for up to 504 addresses Fire control panel can be
More informationWÄRTS1LÄ. EC-Declaration of Conformitv. In accordance with the Marine Equipment Directive 2014/90/EU
WÄRTS1LÄ EC-Declaration of Conformitv In accordance with the Marine Equipment Directive 2014/90/EU we herewith declare that the following product is in accordance with the design described in EC Type Examination
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61514-2 First edition 2004-01 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs IEC 2004
More informationTemperature Measurement Transmitters for field mounting
Siemens AG 07 Overview Application The SITRANS TF can be used everywhere where temperatures need to be measured under particularly harsh conditions. For that reasons users from all industries have opted
More informationGUIDE TO APPROVAL OF RETROFIT BALLAST WATER MANAGEMENT SYSTEM INSTALLATIONS
GUIDE TO APPROVAL OF RETROFIT BALLAST WATER MANAGEMENT SYSTEM INSTALLATIONS September 2016 DNV GL Approval Ship and Offshore Environmental Protection bwm@dnvgl.com DNV GL Headquarters, Veritasveien 1,
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the SITRANS F M MAG 5100W Electromagnetic Flowmeter with MAG 5000, MAG 6000 or MAG 6000 Industry Transmitter DE-76181 Karlsruhe Germany manufactured
More informationAPRIL 2010 ELECTRICAL EQUIPMENT STANDARD FOR CERTIFICATION DET NORSKE VERITAS. No. 2.9 Type Approval Programme No
STANDARD FOR CERTIFICATION No. 2.9 Type Approval Programme No. 6-800 ELECTRICAL EQUIPMENT APRIL 2010 DET NORSKE VERITAS Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11
More informationCertificate of Product Approval
Certificate of Product Approval Certificate Number: 548p-(cl-2) SHIELD FIRE, SAFETY AND SECURITY LTD Redburn House 2a Tonbridge Road Romford, Essex RM3 8QE United Kingdom is authorised to use the mark
More informationOOH740, OOHC740 Automatic fire detectors
OOH740, OOHC740 Automatic fire detectors ASAtechnology TM For the automatic addressable detector bus C-NET Collective / Conventional (OOH740 only) Cerberus PRO Signal processing with ASAtechnology TM Event-controlled
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright
More informationFC724 Fire control panel
FC724 Fire control panel Series FS720 (IP4) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as
More informationFC700A Fire detection control unit
FC700A Fire detection control unit Synova 4-16 Loop analogue addressable control panel 128 devices per loop (SynoLOOP) and up to 1000 devices per panel Up to 24 collective lines for Synova TM 600 serie
More information20 Light Remote Annunciator
Light Remote Annunciator Owner s Manual Surface Mount Flush Mount 94-95- Standard Annunciator 94-, 94-95-, 95-4- 4- Annunciator w/remote Relay Panel 4-, 4-4-, 4-49-, 49-49-, 49- Time Multiplexed Annunciator
More informationFC722 Fire control panel
FC722 Fire control panel Series FS720 (IP4) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as
More informationFire control panel for modernization
Sinteso Fire control panel for modernization FC2030 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso. Fire control panel for a maximum
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE (EC-US MRA)
HRVATSKI REGISTAR BRODOVA Croatian Register of Shipping EC TYPE EXAMINATION (MODULE B) CERTIFICATE (EC-US MRA) No. 03-001535/031232 THIS IS TO CERTIFY: That Croatian Register of Shipping did undertake
More informationIEC Functional Safety Assessment
IEC 61508 Functional Safety Assessment Project: Detcon IR-700 Combustible Hydrocarbon Gas Sensor Customer: Detcon The Woodlands, TX USA Contract No.: Q13/06-003 Report No.: DC 13-06-003 R002 Version V1,
More informationSiemens Process Automation End-user Summit- 2011
Siemens Process Automation End-user Summit- 2011 Experience. Technology. Community SIMATIC PCS 7 Process Safety Jean-Luc Gummersbach I IA AS PA PRM1 Global market trend in Process Safety Process Safety
More informationEXD-HP1/2 Stand-alone Superheat/Economizer Controller
Technical Bulletin EXD-HP1/2 are stand-alone universal superheat and or economizer controllers for heat pumps, heating units, air conditioning and precision cooling such as telecom and shelter applications.
More informationOH720, OP720, HI720, HI722
Cerberus PRO OH720, OP720, HI720, HI722 Automatic fire detectors For the automatically addressable detector bus C-NET The ideal fire detector for every application Signal processing with detection algorithms
More informationCircuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version
More informationINTRODUCTION. Our diverse range of world-class Specialty Insulated Wires and Cablesinclude: LV Cables -
MARINE CABLES Your Power Partner on the Seas INTRODUCTION We, a member of the Al-Bahja Group of Companies, are an ISO:900:2008 BASEC, UK certified integrated quality producer of LV and MV Cables, Wires&
More information5000 Series Rack Panels
5000 Series Rack Panels The operation and functions described in this manual are available from Software Version Mx5000-050-04 onwards. Specifications & Ordering: Models, Sales Order Parts: Mx-5101xR Panel
More informationInstrumentation Products and Applications
1 1/0 Instrumentation Products and Applications 1 Instrumentation Safety barriers I.S. Isolators - DIN rail mounting - Eurocards - Modules Remote I/O Operating and monitoring systems Instrumentation systems
More informationAudible warning devices for external alarm
VdS SCHADENVERHÜTUNG VdS Publisher: Gesamtverband der Deutschen Versicherungswirtschaft e.v. (GDV) Büro Schadenverhütung Publishing house: VdS Schadenverhütung Rules for Intruder Alarm Systems Audible
More informationPRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the SITRANS F M MAGFLO MAG 5100W Electromagnetic Flowmeter with MAG 5000, MAG 6000 or MAG 6000 Industry Transmitter manufactured by: Siemens Flow
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
LRV02..206.09 EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a notified body under the terms of the Merchant Shipping (Marine
More informationUSCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE
LRV02..206.09 USCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a notified body under the terms of the Merchant
More informationExperion LX Direct Station Specification
Technical Information Experion LX Direct Station Specification LX03-210-110 Release 110 January 2014, Version 1 Experion LX Station Specification, LX03-210-110 Revision History Revision Date Description
More informationProcess Alarm Solutions
Process Alarm Solutions Reliable Supervision and Control» Control. Monitor. Protect. SELCO Flexible alarm panels for supervision and control SELCO provides efficient and reliable solutions for alarm monitoring
More informationDESCRIPTION. 42 mm. 125 mm
RMM2-DI TRACE-HEATING REMOTE MONITORING MODULE FOR DIGITAL INPUTS DESCRIPTION 125 mm 60 mm The Remote Monitoring Module for Digital Inputs (RMM2-DI) provides the capability for the Raychem NGC controller
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11608-4 First edition 2006-03-15 Pen-injectors for medical use Part 4: Requirements and test methods for electronic and electromechanical pen-injectors Stylos-injecteurs à usage
More informationSCC Inc. TS Series. Technical Instructions. Document No. TS 5000 February 12, TS CE Combustion Enclosures with LMV3.
TS CE Combustion Enclosures with LMV3 February 12, 2019 Description TS CE series combustion enclosure with Siemens LMV3 linkageless controller sets the new standard for combustion control and monitoring
More informationFDF Sinteso Cerberus PRO Cerberus FIT. Flame detector. Flame detector addressed or collective, ASAtechnology TM
Sinteso Cerberus PRO Cerberus FIT FDF241-9 Flame detector Flame detector addressed or collective, ASAtechnology TM Reliable detection using three infrared sensors and ASAtechnology (indoor and outdoor
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-504 Third edition 2001-03 Electrical installations in ships Part 504: Special features Control and instrumentation Installations électriques à bord des navires Partie 504:
More informationDräger Polytron 8700 IR Detection of flammable gases and vapors
Dräger Polytron 8700 IR Detection of flammable gases and vapors The Dräger Polytron 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit
More informationReport to the Certificate
Report to the Certificate XEF 15 SIL 0039 rev.1 Monitoring System, TDSP Manufacturer: CEMB S.p.A. Via Risorgimento n.9 23826 Mandello del Lario (Lc) Italy Report No.: 22CEM-TECH-15-03 Revision 2.0 of January,
More informationConfirmation of Product Type Approval
16/FEB/2017 Confirmation of Product Type Approval Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product. This certificate reflects the information
More information