11.4 lbs (5.2 kg) 13.2 lbs (6 kg) 17.6 lbs (8 kg) ORDERING INFORMATION MODEL LED COLOR TEMP. VOLTAGE LED DRIVER. 4000K (80 CRI) (Std.

Transcription

1 LB APPLICATION The LED igh Bay is the lighting solution for a wide variety applications that require specific mounting heights. Precision-designed optics, multiple distributional options, lumen outputs and color temperatures choices make the energy-efficient LB the ideal resolution for industrial, commercial and other high bay applications. FEATURES: Die formed, cold-rolled, heavy gauge steel galvanized housing. Acrylic lens. Painted parts finished with high-gloss baked white enamel over rust inhibiting phosphate coating for maximum corrosion resistance. MOUNTING: Suspended (chain or adjustable cable), surface mounting and pendant stem mounting. V-hook provided. Optional pendant monopoint box with side cover, surface mounting brackets. LED: Seoul Semiconductor LED. Color Temperature: 4000/5000 (K) LED module: igh efficiency up to 135 LPW. Color Rendering Index: Ra > 80 Service life: Greater than 100,000 hours. Poke in wire connectors. Calculated L70 : +100,000 hours ELECTRICAL: igh power factor electronic driver, operate from a 120 ~ 277 Vac input range, 50 / 0 z. Dimming control: 10 ~ 100% (std.), 0-10V dim. To find an approved dimmer switch, please see table1. Power Factor: + 0., Class 1 or Class 2 circuit. Efficiency: +87% Ambient Operating Temperature: -4 F (-20 C) ~ 122 F (50 C). 10kA/10kV level of surge protection available (optional). LISTING: UL/CUL listed and labeled. DLC listed. (premium) 1 Suitable for damp locations. ARRA compliant (optional). 5 years limited warranty. Revised: CONFIGURATIONS Input Watts Lumen Output Lumen / Watts CRI Weight 2FT(FL) lm 122 lm/w 2FT(CL) lm 122 lm/w 2FT(FL) lm 131 lm/w 2FT(CL) lm 135 lm/w 4FT(FL) lm 131 lm/w 4FT(CL) lm 1353 lm/w > lbs (5.2 kg) 13.2 lbs ( kg) 17. lbs (8 kg) APPROVED DIMMER SWITC (Table 1) Manufacturer Manufacturer Part # LEVITON ILLUMATEC: IP710-LFZ LUTRON DIVA: DVSTV LUTRON Maestro: MS-Z101 LUTRON Nova: T NTSTV PILIPS Sunrise: SR1200ZTUNV Dimming range 10%-100% * If you want other specific kind, please contact us. COMPATIBLE DIMMERS: EASEIC : EID11OU LEVITON : AWSMT71 ORDERING INFORMATION EXAMPLE: LB-178LED/40-UNV MODEL LED COLOR TEMP. VOLTAGE LED DRIVER LB 110LED 135LED 178LED 10W LED 133W LED 17W LED /40 / K (80 CRI) (Std.) 5000K (80 CRI) UNV V 347V 5 480V 5 (Blank) 0-20V dim, 10~100% OPTIONS EM EM12 EM1 EM20 EM24 EMC ELCU-200 EM Battery Backup 4 7.8W 1200 Lumen EM 10.7W 100 Lumen EM 13.7W 2000 Lumen EM 17.0W 2400 Lumen EM CEC compliant EM 3 Fail-to-on Emergency lighting, UL24 GLR ADC PMB SMB Internal fast-blow fuse igh & Low Mount 30 Motion Sensor 2 Aisle Motion Sensor 2 Daylight arvesting Sensor Pendant Monopoint Bracket 1/2 ub Surface Mount Bracket WG CL SP ACXX ARRA Wire Guard Clear Lens 10kA/10kV Surge Protection Cable Kit Assembled in USA for Buy American Act NOTES: 1. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. 2. Available more options, see page Family Sensor. 3. Check with factory for more details. 4. Emergency Ballast options, see page Only available with 135LED and 178LED.. Shipped separately. 1 UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice.

2 LB W L D Specifications: 178LED Length: 45-15/1 (11) Width: 12-/1 (320) Depth: 3-5/8 (2) Weight: lbs (.2 kg) All dimensions are in inches (millimeters). Specifications: 135LED Length: 23-13/1 (04) Width: 17-5/1 (43) Depth: 3-5/8 (2) Weight: lbs (.7 kg) Specifications: 110LED Length: 23-13/1 (04) Width: 12-/1 (320) Depth: 3-5/8 (2) Weight: 11.8 lbs (5.3 kg) PMB (Pendant anger, 1/2 hub) Chain Kit (Standard) 40 chain ACXX (Cable Kit) SMB (Surface Mounting) WG (Wire Guards) LB-110LED LB-135LED LB-178LED UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice. 2

3 Catalog Number Type PRODUCT OVERVIEW The Family of fixture mount occupancy sensors provides reliable and versatile solutions for commercial and industrial lighting control applications. All Family sensors utilize passive infrared (PIR) detection and feature interchangeable lenses, providing flexibility for multiple mounting height and coverage pattern requirements. All Family sensors utilize 100% digital Passive Infrared (PIR) detection and power from / switch line voltage. Available options include dual relays, VOLT powering, and an integrated switching / dimming photocell. FAMILY FIXTURE MOUNT SENSOR w/ INTERCANGEABLE LENSES, PIR, LINE VOLTAGE SENSOR OPERATION The sensor detects changes in the infrared energy given off by occupants as they move within the field-of-view. When occupancy is detected, a self-contained relay switches the connected lighting load on. No initial field calibration or sensitivity adjustments are required. Family sensors are designed to switch both LED and fluorescent lighting loads. Robust relay protection makes units capable of enduring the extreme inrush conditions often encountered with LED loads. Additionally, sensors utilize patented LampMaximizer technology that allows users to aggressively target energy savings, by using shorter occupancy time delays, while still protecting fluorescent lamp life. A minimum on timer, factory set at 15 minutes, helps preserve lamp life by eliminating all lamp cycles shorter than fluorescent lamp manufacturers' recommendations. A standard occupancy time delay is also present to ensure lights turn off (once minimum on timer has also elapsed) if no occupancy is detected. This timer is factory set at 1inutes to promote energy savings, but is adjustable between 30 seconds and 3inutes. These adjustments may be done through the unit s push-button. FEATURES Four interchangeable lenses - high mount 30º, low mount 30º, high mount aisleway, and small motion 30º Integrated mounting bracket drops lens down 3" from chase nipple - no bracket accessory required 100% digital PIR detection - provides excellent RF immunity No PIR field calibration or sensitivity adjustments required Single or dual relay versions - designed with robust protection from the harsh switching requirements of T5 fluorescent and LED loads Powers from single or two-phase line connections Reversible hot & load wires - eliminates backwards wiring Photocell and 0-10 VDC dimming options Digital push-button programming - no tools or analog adjustments required Non-volatile settings memory Convenient test mode - quickens initial walk and/or photocell testing Green LED indicator LampMaximizer minimum on timer (15 min) enables usage of shorter occupancy time delays while protecting fluorescent lamp life Default 1inute occupancy time delay KEY OPTIONS IG/LOW OCCUPANCY OPERATION (L) Provides high/low control of a 0-10V dimmable fixture. Lights are reduced to an energy saving minimum dim level after expiration of occupancy time delay. If relay is wired, lights will switch off after a second time delay. SWITCING POTOCELL (P & 2P-P) Provides increased energy savings by switching lights off during occupied periods with sufficient daylight contribution from windows or skylights. Lights will be switched back on if light level falls below set-point. 2P-P version always switches both relays together. Optional inhibit mode: Photocell will prevent lights from initially turning on if adequate daylight is available, but will not turn lights off. DIMMING & SWITCING POTOCELL (ADC) Provides maximum energy savings by first dimming down, then switching off, lighting during periods of sufficient daylight contribution from windows or skylights. When daylight contribution decreases, lights will be first switched back on at full dim and then raised up as necessary. Controls 0-10V dimmable fluorescent ballasts and LED drivers. COMBINATION DIMMING & SWITCING POTOCELL w/ IG/LOW OCCUPANCY OPERATION (ANL) Provides maximum energy savings by first dimming down, then switching off, lighting during periods of sufficient daylight contribution from windows or skylights. During unoccupied periods without sufficient daylight lights are dropped to low dim setting, insuring minimum light levels are maintained at night. Controls 0-10V dimmable fluorescent ballasts and LED drivers. ALTERNATING OFF RELAYS (2P-AO & 2P-AOP) Sequence of operation where both relays close during periods of occupancy, but only one opens during vacancy. The relay left closed alternates in order to promote even lamp wear. 2P-AOP version also includes switching photocell. DUAL ZONE SWITCING POTOCELL (2P-DZ) Provides dual level photocell control for dual relay versions. SINGLE POLE SWITCING POTOCELL (2P-SZ) Occupancy controls one pole only. Switching photocell controls other pole. 3 UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice.

4 FAMILY FIXTURE MOUNT SENSORS ORDERING INFORMATION SINGLE RELAY Series Passive Infrared Indoor Occupancy Sensor addl. ordering options (*available in 100 packs only) (example: 10 ADC VOLT J100) Single Lens Max Dim Level* 10 VDC VDC 8 8 VDC 7 7 VDC No Lens igh Mount 30º Low Mount 30º igh Mount Aisleway Small Motion 30º 1V 2V 3V 4V 5V V Lens Options Multi-Lens PK 4PK Min Dim Level* Min 1 VDC 2 VDC 3 VDC 4 VDC 5 VDC VDC igh & Low Mount 30º igh Mount 30º & Aisleway igh & Low Mount 30º, & Aisleway All Lenses Lead Length* 42L 8" 42" Dimming/Photocell L P ADC ANL 5M 15M 20M 30M Voltage None VAC (MVOLT) igh/low Occupancy VOLT VAC Operation Switching Photocell (On/Off) Dimming & Switching Photocell Dimming & Switching Photocell with igh/low Occ. Operation (see description on pg.1) Temp / umidity Default Time Delay* Pack Qty None LT Low Temp 1in (w/ 15 min minimum on time) 5 min (LED only) 15 min 2in 3in *option available in 100-pack qtys only (add J100 option) J100 Single 100-Pack DUAL RELAY (example: 10 2P AO J100) 2P Series Passive Infrared Indoor Occupancy Sensor Single Lens No Lens igh Mount 30º Low Mount 30º igh Mount Aisleway Small Motion 30º Lens Options Multi-Lens PK 4PK igh & Low Mount 30º igh Mount 30º & Aisleway igh & Low Mount 30º, & Aisleway All Lenses Poles 2P Dual Relay AO AOP P SZ DZ Operating Mode Voltage None 120/277 VAC Alternating Off Relays VAC (promotes even lamp wear) Alternating Off Relays w/ Photocell Photocell On/Off - both Poles (single set-point) Photocell On/Off (Pole 1 only) Photocell On/Off - both Poles (dual set-point) ACCESSORY LENSES (example LENS 50 J100 ) LENS Lens Type igh Mount 30º Low Mount 30º igh Mount Aisleway Small Motion 30º Job Pack Qty J10 J100 Single 10-Pack 100-Pack addl. ordering options (*available in 100 packs only) Lead Length* Temp / umidity Default Time Delay* Pack Qty 42L 8" 42" CSA LISTED TITLE 24 ASSEMBLED in U.S.A. 5 YEAR WARRANTY None LT Low Temp 5M 15M 20M 30M 1in (w/ 15 min minimum on time) 5 min (LED only) 15 min 2in 3in *option available in 100-pack qtys only (add J100 option) WARRANTY 5-year limited warranty. Complete warranty terms located at WARNING Fire azard Caution: Maximum Lamps 1500 Watts, Type 347VAC. Attention: Risque d incendie : Pauissance Maximales Des Lampes 1500W, Type 347VAC. WARNING: The units are intended to be installed by a qualified person with properly rated branch circuit protectors as per applicable local and national regulations (CEC, NEC). UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice. J100 Single 100-Pack Sheet#: TS--001B 4

5 FAMILY FIXTURE MOUNT SENSORS SPECIFICATIONS ELECTRICAL SPECS MAXIMUM LOAD VAC 208 VAC /277 VAC VAC VAC MINIMUM LOAD: None MOTOR LOAD: 1/4 P FREQUENCY: 50/0 z DIMMING LOAD: Sinks < 2A; (~ 40 LED 0.5 per) 0-10VDC dimmable ballasts or LED drivers only COVERAGE PATTERNS IG MOUNT 30º LENS (#) Best choice for 15 to 45 ft (4.57 to m) mounting heights 15 to 2 (4.57 to.1) radial coverage overlaps area lit by a typical high bay fixture Excellent detection of large motion (e.g. walking) up to a 35 ft (10.7 m) mounting height Excellent detection of extra large motion (e.g. forklifts) up to a 45 ft (13.72 m) mounting height PYSICAL SPECS SIZE (w/ Mounting Flange): 3.75 x 2.50 W x 4.00 D (.5 cm x.4 cm x 10.2 cm) WEIGT: oz MOUNTING: 1/2" knockout (7/8" hole) on fixture COLOR: White SILICONE FREE ROS COMPLIANT LOW VIEW ENVIRONMENTAL SPECS OPERATING TEMP Standard: 14º to 122º F (-10º to 50º C) LT Option (PIR): -40º to 122º F (-40º to 50º C) RELATIVE UMIDITY: Standard: 20 to 75% non-condensing LT Option: 20 to 0% non-condensing (electronics coated for corrosion resistance) IG VIEW IG MOUNT AISLEWAY LENS (#50) Provides a bi-directional coverage pattern ideal for warehouse racking 1.2x mounting height equals approximate detection range in either direction Typical 4 (12.1 m) mounting detects 5 (15.24 m) in either direction Superior aisleway coverage compared to a masked 30º lens SIDE VIEW 0 m TOP VIEW LOW MOUNT 30º LENS (#10) Best choice for large motion detection (e.g. walking) 30º conical shaped pattern Provides ~24 ft (7.32 m) radial coverage (~200 2 ) when mounted at ft (2.74 m) 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 1 to 3 ft (4.88 to 10.7 m) radial coverage Detection range improves when walking across beams compared to into beams SIDE VIEW TOP VIEW SMALL MOTION 30º LENS (#) Best choice for small motion (e.g. hand movements) detection 30º conical shaped pattern Provides 12 ft (3. m) radial coverage (~500 ft 2 ) when mounted to standard ft (2.74 m) ceiling 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 2 (3.05 to.1) radial coverage Lens assembly is marked with a gray ring around lens to differentiate versus the #10 lens SIDE VIEW TOP VIEW 5 UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice

6 FAMILY FIXTURE MOUNT SENSORS WIRING DIAGRAMS - SINGLE RELAY WIRING TO SINGLE PASE POWER (120/277/347 VAC) BLACK 1,2-120/277 VAC Input (RED wire for 347 VAC) BLACK 1,2,3 - Switched Line Voltage Output to Luminaire (RED wire for 347 VAC) WITE - Neutral VIOLET - Low Voltage Dimming Output (0-10 VDC) wires present with dimming GRAY - Low Voltage Common options only } WIRING TO 2-PASE POWER (208/240/480 VAC)* *Safety Note: only one line phase is being switched, use in direct fixture mount applications only BLACK 1,2 BLACK 1,2,3 WITE VIOLET GRAY - 208/240 VAC Phase A Input (RED wire for 480 VAC) - Switched Line Voltage Output to Luminaire (RED wire for 480 VAC) - Phase B of 208/240/480 VAC Input - Low Voltage Dimming Output (0-10 VDC) wires present with - Low Voltage Common } dimming options only N Line Phase A Line Phase B BLK 1,2 (line in) WT (neutral) BLK 1,2 WT (phase A line in) (phase B line in) BLK 1,2,3 (line out) VIO (low voltage dim out) GRY (low voltage common) Fixture Ballast or LED Driver BLK 1,2,3 (phase A line out) VIO (low voltage dim out) GRY (low voltage common) Fixture Ballast or LED Driver 2. Wire is Red for VOLT version (required for 347 VAC) 3. Disconnect and cap Black output wire going to driver/ballast if switching fixture is not required. 2. Wire is Red for VOLT version (required for 480 VAC) 3. Disconnect and cap Black output wire going to driver/ballast if switching fixture is not required. WIRING DIAGRAMS - DUAL RELAY (e.g., xx 2P) WIRING FOR 120/277/347 BLACK 1,3,4 - Pole 1: 120/277 VAC Input (RED wire for 347 VAC) BLACK 1,3,4 - Pole 1: Switched Line Voltage Output to Luminaire (RED wire for 347 VAC) WITE - Neutral BLUE 2 - Pole 2: 120/277/347 VAC Input (must be same phase as pole 1) BLUE 2 - Pole 2: Switched Line Voltage Output to Luminaire Operational States for -DZ option Low Daylight Occupancy Med. Daylight igh Daylight No Occ. Load 1 On Off Off Off Load 2 On On Off Off BLK 1,3,4 (line 1 in) BLK 1,3,4 (line 1 out) WT(neutral) BLU 2 (line 2 out) BLU 2 (line 2 in) 2. Blue wires can be reversed 3. Wire is Red for 347 VAC Version 4. Red wires can be reversed Load 1 Load 2 N WIRING FOR 120/277/347 WIT -SZ OPTION (e.g., 2P SZ) BLACK 1,3,4 - Pole 1: 120/277 VAC Input (RED wire for 347 VAC) BLACK 1,3,4 - Pole 1: Switched Line Voltage Output to Luminaire (RED wire for 347 VAC) WITE - Neutral BLUE 2 - Pole 2: 120/277/347 VAC Input (must be same phase as pole 1) BLUE 2 - Pole 2: Switched Line Voltage Output to Luminaire Operational States for -SZ option Daylight / Occ. Daylight / No Occ. No Daylight & Occ. No Daylight & No Occ. Load 1 Off Off On On Load 2 Off Off On Off BLK 1,3,4 (line in) BLK 1,3,4 (photocell out) BLU 2 WT (neutral) BLU 2 (occupancy out) 2. Blue wires can be reversed 3. Wire is Red for 347 VAC Version 4. Red wires can be reversed Load 1 Load 2 N UTOPIA LIGTING reserves the right to change specifications, drawings, dimensions without prior notice.