Declaration of Conformity

Size: px
Start display at page:

Download "Declaration of Conformity"

Transcription

1 Declaration of Conformity DEMONSTRATION OF CONFORMITY WITH RECOGNIZED STANDARDS TO SATISFY THE SAFETY AND EFFECTIVENESS REQUIREMENTS OF THE CANADIAN MEDICAL DEVICES REGULATIONS Name of the medical device as it appears on the label: Clarity Acquisition Station 310C00 Name of the Manufacturer of the medical device: ELEKTA LTD. 1. List of recognized standard(s) applicable in part or in whole to this Medical Device: Full name of Standard(s) as stated on the TPD Recognized Standards List IEC :2007-Ed.2.0 Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment - Edition 2.0 IEC :2012-Ed.3.1 (CSA C22.2 No :2014) Medical electrical equipment - Part 1: General requirements for basic safety and essential performance IEC :2014-Ed.4.0 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests IEC :2010-Ed.3.0 Medical electrical equipment - Part 1-6: General requirements for safety - Collateral standard: Usability IEC 62304:2006-Ed.1.0 Medical device software - software life cycle processes ISO :2009/Cor.1:2010 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process ISO 14971:2007 (CSA-ISO ) Medical devices Application of risk management to medical devices In the case where only specific parts or Sections of a recognized standard apply to the device, Sections 2 through 7 must be completed. In the case where all parts and Sections of a recognized standard apply to the device, Section 5 through 7 must be completed. 1

2 2. In the case where only specific parts or Sections of a recognized standard apply to the device, note the requirements that are not applicable to the medical device: Recognized Standard(s) IEC :2007-Ed.2.0 IEC :2005-Ed.3.0 Inapplicable Requirements of the Recognized Standard All clauses relating to INVASIVE TRANSDUCER ASSEMBLIES All clauses relating to Acoustic Output with TI, MI > Alternative RISK CONTROL measures or test methods 4.9 COMPONENTS WITH HIGH-INTEGRITY CHARACTERISTICS 6.4 Method(s) of sterilization 6.5 Suitability for use in an OXYGEN RICH ENVIRONMENT Connection to an external d.c. power source PATIENT CONNECTIONS intended to deliver current DEFIBRILLATION-PROOF APPLIED PARTS Surface coatings POTENTIAL EQUALIZATION CONDUCTOR FUNCTIONAL EARTH TERMINAL Class II ME EQUIPMENT Application [CREEPAGE DISTANCES and AIR CLEARANCES] Spaces filled by insulating compound Cord-connected HAND-HELD parts and cord-connected foot-operated control devices Guiding rollers for insulated conductors MULTIPLE SOCKET-OUTLETS MAINS TERMINAL DEVICES (REF only) Mains fuses (REF only) Internal wiring of the MAINS PART (REF only) Emergency stopping devices Release of PATIENT Grips and other handling devices 9.5 Expelled parts HAZARD Hand-transmitted vibration 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure Systems with MECHANICAL PROTECTIVE DEVICES 10.1 X-Radiation 10.2 Alpha, beta, gamma, neutron and other particle radiation 10.3 Microwave radiation 10.5 Other visible electromagnetic radiation 2

3 10.6 Infrared radiation 10.7 Ultraviolet radiation ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anesthetics ME EQUIPMENT and ME SYSTEMS intended for use in conjunction with flammable agents Overflow in ME EQUIPMENT Leakage Sterilization of ME EQUIPMENT and ME SYSTEMS 12.3 ALARM SYSTEMS Accidental selection of excessive output values Diagnostic or therapeutic radiation Diagnostic or therapeutic acoustic pressure ME EQUIPMENT with motors ME EQUIPMENT RATED for non-continuous OPERATION Batteries Actuating parts of controls of ME EQUIPMENT Cord-connected HAND-HELD and foot-operated control devices Internal wiring of ME EQUIPMENT [Aluminium wires] Oil containers 15.5 MAINS SUPPLY TRANSFORMERS 16.3 Power supply [power from other equipment] 16.4 ENCLOSURES [non-me EQUIPMENT in PATIENT ENVIRONMENT subject to contact by OPERATOR] 3. In the case where only specific parts or Sections of a recognized standard apply to the device, note the deviations from the recognized standard(s). For example: To meet requirements of other Federal or Provincial legislation in Canada. Name of Recognized Standard Deviation 3

4 4. In the case where a standard has been adapted, note the requirements of the standard(s) have been adapted for application to this medical device. For example: In the case of a standard that offers alternative methods, specify which method has been followed. Standard IEC :2014-Ed.4.0 IEC 62304:2006-Ed.1.0 ISO :2009 Adapted Section(s) CISPR 11, Emissions: GROUP 1/ CLASS A IEC , Harmonics: CLASS A Immunity: Specific Acceptance Criteria for Essential Performance CLASS C Probe material: Skin surface-contacting devices with Limited Exposure (A) ( 5.2, 5.3) 5. The medical device which was tested against the recognized standard(s) is identical to the medical device intended to be marketed in Canada: Yes No (see NOTE below) If the answer above is No, the difference(s) between the tested medical device and the medical device intended to be marketed in Canada are as follows: NOTE: There two main system configurations available for sale based around the Clarity System Acquisition Station: (a) REF and (b) REF Both system configurations share the same fundamental technology, design philosophy and principles of operation. REF is the latest production version of the device and identical to the device that was tested against recognized safety standards by independent testing labs. REF is the previous version of the device, which may still be sold in Canada while supplies last. This device includes non-significant changes since the version that was tested against recognized standards. The changes implement similar or identical specifications to those found in the REF system configuration, including: (a) Identical independent power supply for the Optical Tracking System (the system was re-tested, re-certified and assessed for conformance with current standards); (b) Identical KVM/USB extender and touch-monitor for Remote Control (the system was re-tested, re-certified and assessed for conformance with current standards); (c) Improved ergonomics (e.g., reduced number of switches and indicators, re-located for easier user access); (d) Improved robustness (e.g., venting and air filter for better cooling); (e) Improved manufacturability (e.g., longer ground studs, better internal access, enclosure painting); and (f) Identical ultrasound probes and other accessories. 4

5 Given the difference(s) between the tested medical device and the medical device intended to be marketed in Canada, the application of the recognized standard(s) is justified for the following reason( s): The design changes to the REF system configuration do not introduce new risks or increase the probability of occurrence of known hazards, do not change the way users encounter risks, and do not affect adversely the performance specifications or the safety and effectiveness of the system. Conformance of this system configuration with current recognized standards was assessed internally at Elekta Ltd, taking into account the results from re-certification testing and equivalent testing on the device configuration. Additional testing was not deemed necessary to demonstrate conformity. 6. An independent testing laboratory or certification body was used to determine the conformance of the medical device with the recognized standard(s): Yes 0 (only standards indicated below) No 0 (see NOTE below) If the answer to the above is Yes, the name and address of the testing laboratory or certification body and their accreditations are as follows: Name and Address of Testing Laboratory or Certification Body. UL LLC (IEC and IEC ) SCC (ISO/IEC 17025) Nemko Canada Inc. (IEC ) SCC (ISO/IEC 17025) International, National or Provincial Accreditations oftbe Testing Laboratory or Certification Body NAMSA (USA) (ISO 10993) A2LA and AAALAC IntI. (ISO/IEC 17025) NOTE: Incremental changes to device REF 9100-{)0054 were evaluated internally at Elekta Ltd. 7. As a senior official of the manufacturer, having responsibility for the regulatory compliance of the medical device with the requirements of the Canadian Medical Devices Regulationsand this Declaration of Conformity, I hereby declare that the information I have provided in support of the safety and effectiveness of the medical device to be true and accurate. I also acknowledge that any false statement made with respect to the conformity of the medical device with an applicable recognized standard(s), or a determination by Health Canada that the medical device does not conform to the requirements of the recognized standard( s), could result in the suspension of any medical device licence which has been issued for the medical device subject of this Declaration of Conformity. Name of Senior Official Title of Senior Official Signature of Senior Official Date: Alex Carrillo Director QA, Americas Revised Dale: C2 and Pl Restricted Information and Basic Personal Data 5

TECHNICAL REPORT IEC TR General testing procedures for medical electrical equipment. Edition

TECHNICAL REPORT IEC TR General testing procedures for medical electrical equipment. Edition TECHNICAL REPORT IEC TR 62354 Edition 3.0 2014-09 General testing procedures for medical electrical equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XH ICS 11.040 ISBN 978-2-8322-1856-3 Warning!

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 10 Technology Drive (Test Laboratory) Peabody, MA 01960 Mr. William Stinson Phone 1 978 573 2517 ELECTRICAL Valid To: December 31, 2019

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV RHEINLAND OF NORTH AMERICA, INC. 12 Commerce Road Newtown, CT 06470 Mr. Bruce Fagley: 203 426 0888 x119 Email: bfagley@us.tuv.com www.tuv.com ELECTRICAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT IEC TR 62354 Edition 3.0 2014-09 General testing procedures for medical electrical equipment IEC TR 62354:2014-09(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ARTESYN PRODUCT TESTING SERVICES 2900 South Diablo Way, Suite 190 Tempe, AZ 85282 Tom Tuttle Phone: 602 228 7869 Email: tom.tuttle@artesyn.com ELECTRICAL (EMC)

More information

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 157 Report No.: E309264-D1009-1-CB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MRT TECHNOLOGY (SUZHOU) CO., LTD. D8 Building, Youxin Industrial Park No. 2 Tina'edang Rd. Wuzhong Economic Development Zone Suzhou, Jiangsu, People s Republic

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 1950 Evergreen Blvd., Suite 100 Duluth, GA 30096 Gary Flom Phone 678 775 2334 ELECTRICAL Valid To: March 31, 2020 Certificate

More information

38-SDMS-03 SPECIFICATIONS FOR LV DIGITAL PANEL METERS

38-SDMS-03 SPECIFICATIONS FOR LV DIGITAL PANEL METERS SPECIFICATIONS FOR LV DIGITAL PANEL METERS This specification is property of SEC and subject to change or modification without any notice CONTENTS Clause Page 1.0 SCOPE 3 2.0 CROSS REFERENCES 3 3.0 APPLICABLE

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC TR 60601-4-2 Edition 1.0 2016-05 colour inside Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical electrical equipment

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-1-2 2001 AMENDMENT 1 2004-09 Amendment 1 Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility Requirements

More information

AS/NZS IEC :2016

AS/NZS IEC :2016 AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety

More information

AUGUST 2016 CONTENTS:

AUGUST 2016 CONTENTS: EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.

More information

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 170 Report No.: E309264-D1021-1/A1/C0-UL IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD IEC 60601-2-44 INTERNATIONAL STANDARD Edition 2.1 2002-11 Medical electrical equipment Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography INTERNATIONAL ELECTROTECHNICAL

More information

IEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 165 Report No.: E309264-D1028-1/A0/C0-UL Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager

More information

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO 80601-2-55 Second edition 2018-02 Medical electrical equipment Part 2-55: Particular requirements for the basic safety

More information

Safety Standards for Electronic Products

Safety Standards for Electronic Products Safety Standards for Electronic Products The following are some of the safety standards for all types of electronic products. ANSI C95.3:1972 / Techniques & instrumentation for measurement of potentially

More information

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-27 Edition 5.0 2009-12 colour inside Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained

More information

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium

More information

Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining

Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities

More information

UL TEST REPORT AND PROCEDURE

UL TEST REPORT AND PROCEDURE Issue Date: 2016-01-26 Page 1 of 7 Report Reference # E182560-V4-S52 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1 (2005/(R)2012 + A1:2012, C1:2009/(R)2012 + A2:2010/(R)2012) - Amendment 1

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Jay Kogoma or Michelle Loeffler Phone 651 730 1188 ELECTRICAL Valid to: February

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-1-2 Third edition 2007-03 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance Collateral standard: Electromagnetic compatibility

More information

ISO This is a preview - click here to buy the full publication INTERNATIONAL STANDARD. Second edition

ISO This is a preview - click here to buy the full publication INTERNATIONAL STANDARD. Second edition INTERNATIONAL STANDARD ISO 9919 Second edition 2005-03-15 Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext. SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 F2 LABS 16740 Peters Road Middlefield, OH 44062 Wendy Fuster Phone: 301 253 4500 Ext. 101 ELECTRICAL (EMC) Valid To: November 30, 2019 Certificate Number: 0793.02

More information

Medical devices and electromagnetic compatibility. Addressing the requirements of IEC , 4 th Edition

Medical devices and electromagnetic compatibility. Addressing the requirements of IEC , 4 th Edition Medical devices and electromagnetic compatibility Addressing the requirements of IEC 60601-1-2, 4 th Edition Executive Summary Risk of electromagnetic interference and immunity have long been important

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS-CSTC STANDARDS TECHNICAL SERVICES CO., LTD Shenzhen Branch No.1 Workshop, M-10, Middle Section, Science and Technology Park Shenzhen, Guangdong, 518057,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CENTRE TESTING INTERNATIONAL GROUP CO., LTD. 1 Building C, Hongwei Industrial Park Block 70, Bao'an District Shenzhen, Guangdong, People s Republic of China

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD CANADA 1 11 Gordon Collins Dr. Gormley, Ontario, L0H 1G0, CANADA William (Mac) Elliott Phone: 813 284 2736 ELECTRICAL Valid To: June 30, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COSMOS CORPORATION 1 718-1, Katsurase-Cho Matsusaka-shi, Mie 515-1104 JAPAN Akira Sakai (Authorized Representative) +81 598-30-6211 sakai-akira@cosmos-corp.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES SHANGHAI Bl. No. 86, 1198 Qinzhou Road (North) Shanghai 200233, PEOPLE S REPUBLIC OF CHINA Leah Xu leah.xu@intertek.com Phone: +86

More information

AS/NZS :2003 Luminaires - Part 1: General requirements and tests

AS/NZS :2003 Luminaires - Part 1: General requirements and tests Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 60598.1:2003 Luminaires - Part 1: General requirements and tests Table of Contents View on Information Provider

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) - LONGMONT 1736 Vista View Drive Longmont, CO 80504-5242 Mr. Eric Loucks Phone: 303 776 7249 ELECTRICAL Valid To: August 31,

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 80601-2-55 First edition 2011-12-15 Medical electrical equipment Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors

More information

Listing of standards providing presumption of conformity for List (2) products under Regulation BD

Listing of standards providing presumption of conformity for List (2) products under Regulation BD BD-142004-01 List Standards Listing Listing of standards providing presumption of conformity for List products under Regulation BD-142004-01 Ed. 1.0 -February 2018 2018-02-18 The standard references below

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2055 Edition 2.0 2015-06-03 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Guideline Document on Medical Electrical

More information

Safety requirements for voltage testing instruments

Safety requirements for voltage testing instruments MODEL POLICY Safety requirements for voltage testing instruments 1. FOREWORD 1.1. Approval 1.1.1. This standard is owned by. name of promulgating organization or department 1.1.2. Questions related to

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC. 13501 McCallen Pass Austin, TX 78753 Frank Casbolt Phone: 512 287 2500 Frank.casbolt@metlabs.com http://www.metlabs.com I. ELECTRICAL

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-90 Edition 4.0 2015-08 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens INTERNATIONAL ELECTROTECHNICAL

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATOIRE D ESSAIS CEM INC. 1490-D Nobel Street Boucherville, Quebec, Canada J4B 5H3 Mr. Xavier Couste Phone: 450 868 0360 Email: Xavier.Couste@nts.com ELECTRICAL

More information

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. 1 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 Thailand Mr. Dirk Fleischer (Quality

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PARKER HANNIFIN CHOMERICS TEST SERVICES WOBURN, MA 84 Dragon Court Woburn, MA 01888 David Inman Phone: 781 939 4375 ELECTRICAL (EMC) Valid to: June 30, 2020

More information

ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests

ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour

More information

Transitioning to IEC Edition 3.1 Guidance for Global Implementation. November 2015

Transitioning to IEC Edition 3.1 Guidance for Global Implementation. November 2015 Transitioning to IEC 60601-1 Edition 3.1 November 2015 Table of Contents Introduction.....3 Amendment 1 to IEC 60601-1 published 2012....4 The status of Edition 3.1 in major markets....8 Intertek s recommendations

More information

Certificate of Compliance

Certificate of Compliance Certificate of Compliance Certificate: 70000287 (085005_0_000) Issued to: steute Schaltgeräte GmbH & Co. KG Brueckenstrasse 91 Loehne, 32584 GERMANY Attention: Patrick Keilwerth The products listed below

More information

A Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133

A Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133 A Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133 John JC Copeland Energy Assurance LLC August 6, 2015 Awareness Overview Tests (current version) Comparison

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE MANAGEMENT GROUP (CMG) 1 257 Simarano Drive, Suite 4 Marlborough, MA 01752 Authorized Representative: Mike Morrow Phone: 508 460 1400 ext. 222 Email:

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-2-5 Second edition 2000-07 Medical electrical equipment Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment Appareils électromédicaux

More information

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Dean King Dean King November 16, 2012

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Dean King Dean King November 16, 2012 AC200032 AGENCY DOCUMENTS, ET1528L Third Edition REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO-12-020164 Dean King Dean King November 16, 2012 DOC #: AC200032 Print

More information

Compliance Engineering Ireland Ltd

Compliance Engineering Ireland Ltd Clonross, Dunshaughlin, Co. Meath Testing Laboratory Registration number: 088T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE ENGINEERING PTY LTD 90 Indian Drive Keysborough, Victoria 3173, AUSTRALIA Mr. Simon Grilj Phone: 61 3 9763 3079 Email: simon@compeng.com.au ELECTRICAL

More information

An Urgent Bulletin from CSA Group

An Urgent Bulletin from CSA Group Ref No: I16-140 Appliances No. 48 (Supersedes Informs Appliances No. 21, Ref No: I12-107) Date: December 21, 2016 An Urgent Bulletin from CSA Group Existing Certification not affected Apply any time to

More information

This is a preview - click here to buy the full publication ICS ISBN

This is a preview - click here to buy the full publication ICS ISBN CONSOLIDATED VERSION IEC 60691 Edition 4.1 2019-01 colour inside Thermal-links Requirements and application guide INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.120.50 ISBN 978-2-8322-6430-0 Warning!

More information

EU Declaration of Conformity

EU Declaration of Conformity 16 May 2017 EU Declaration of Conformity Model Number: ET1215L Series Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial Product

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-13 Edition 6.0 2009-12 Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances INTERNATIONAL

More information

This is a preview - click here to buy the full publication INTERNATIONAL ELECTROTECHNICAL COMMISSION

This is a preview - click here to buy the full publication INTERNATIONAL ELECTROTECHNICAL COMMISSION INTERNATIONAL ELECTROTECHNICAL COMMISSION GUIDE 111 Second edition 2004-07 Electrical high-voltage equipment in high-voltage substations Common recommendations for product standards IEC 2004 Copyright

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES INC. 1 Kunshan Laboratory No. 10 Wei ye Road Innovation Park Eco & Tec. Development Zone Kunshan City, Jiangsu, People s Republic

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-2-50 First edition 2000-07 Medical electrical equipment Part 2-50: Particular requirements for the safety of infant phototherapy equipment Appareils électromédicaux Partie

More information

Rules for Classification and Construction Additional Rules and Guidelines

Rules for Classification and Construction Additional Rules and Guidelines VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 7 Test Requirements for Statical Converters with Semi-Conductors Edition

More information

13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations

13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations IAS Accreditation Number Company Name Address Contact Name Telephone (604) 273-4581 Effective Date of Scope February 9, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-270 - Vancouver 13799 Commerce

More information

UL TEST REPORT AND PROCEDURE

UL TEST REPORT AND PROCEDURE Issue Date: 2010-12-01 Page 1 of 16 Report Reference # E252373-A31-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information

More information

Test Report. Appliance EMF Testing

Test Report. Appliance EMF Testing Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) 1536 East Valencia Drive Fullerton, California 92831 Cathy Rumble Phone: (714) 879-6110 E-mail: cathy.rumble@nts.com Website:

More information

IAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany

IAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany IAS Accreditation Number TL-437 Company Name Address Admiral Rosendahl Strasse 23 Neu Isenburg 63263 Germany Contact Name Ingmar Essert Telephone +4969489810234 Effective Date of Scope March 9, 2018 Accreditation

More information

Heated Display Merchandiser. Instruction Manual. Models: GC875-A / GC876-A / GC877-A

Heated Display Merchandiser. Instruction Manual. Models: GC875-A / GC876-A / GC877-A Heated Display Merchandiser Instruction Manual Models: GC875-A / GC876-A / GC877-A Safety Tips Position on a flat, stable surface. A service agent/qualified technician should carry out installation and

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ZHONGJIAN NANFANG TESTING CO., LTD. 1 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao an District, Shenzhen, Guangdong,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES, INC. 1 Xindian Laboratory No.163-1, Jhongsheng Road Xindian District, New Taipei City 23151, Taiwan, R.O.C. Contact: Kurt

More information

10.6 Schedule of Accreditation

10.6 Schedule of Accreditation Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying

More information

Article by: Ark Tsisserev, Principal, Stantec Consulting Ltd.

Article by: Ark Tsisserev, Principal, Stantec Consulting Ltd. Re: CEC 2012 Article by: Ark Tsisserev, Principal, Stantec Consulting Ltd. Conductors Do we have a problem with this? Apparently, we do. However, there is no reason to generalize this problem. Although

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Washington Laboratories, Ltd. 7560 Lindbergh

More information

DRAFT TANZANIA STANDARD

DRAFT TANZANIA STANDARD EEDC 4 (5156) P3 IEC 62642-3: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Intrusion and hold-up systems Part 3: Control and indicating equipment TANZANIA BUREAU OF STANDARDS TBS

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62401 Edition 2.0 2017-12 Radiation protection instrumentation Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material INTERNATIONAL

More information

HEALTH AND SAFETY PROGRAM 406 IONIZING/NONIONIZING RADIATION PROTECTION

HEALTH AND SAFETY PROGRAM 406 IONIZING/NONIONIZING RADIATION PROTECTION Page 1 of 11 1.0 PURPOSE Axiall, Plaquemine Complex, maintains various sources of ionizing and nonionizing radiation throughout the complex. Ionizing radiation sources include density gauges and PMI Analyzers.

More information

NPS/003/030 Technical Specification for Transformer and Switchgear Cable Boxes and their associated Bushing Assemblies

NPS/003/030 Technical Specification for Transformer and Switchgear Cable Boxes and their associated Bushing Assemblies Version:- 2.0 Date of Issue:- May 2015 Page 1 of 17 NPS/003/030 Technical Specification for Transformer and Switchgear Cable Boxes and their associated Bushing Assemblies 1. Purpose The purpose of this

More information

AS/NZS IEC :2013

AS/NZS IEC :2013 AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 80601-2-13 First edition 2011-08-01 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation Appareils

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC TR 60601-4-3 Edition 2.0 2018-12 colour inside Medical electrical equipment Part 4-3: Guidance and interpretation Considerations of unaddressed safety aspects in the third edition

More information

CERTIFICATION BULLETIN

CERTIFICATION BULLETIN File: ULC Subject C100 ULC-G.5.2 CCF7 S500F/SC2 October 28, 2014 CERTIFICATION BULLETIN 2014-07 Second Edition ULC/ORD-C100-13 Smoke Control System Equipment To: Members of the ULC Advisory Committee Members

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62040-1-2 First edition 2002-08 Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations Alimentations sans interruption

More information

Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services

Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services www.intertek.com/lighting 1 Identifying Product Safety Requirements for Your Target Markets

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-2-45 Second edition 2001-05 Medical electrical equipment Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic

More information

5.1.1 Manufacturer The date of manufacture, as well as the name and address of the manufacturer, can be combined in one symbol.

5.1.1 Manufacturer The date of manufacture, as well as the name and address of the manufacturer, can be combined in one symbol. BS EN ISO 15223-1: 2012 Medical devices s to be used with medical device labels, labeling and information to be supplied. Part 1: General requirements Title 5.1.1 Manufacturer The date of manufacture,

More information

IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.

IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed. IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2

More information

PENALTIES. All imported products are required to meet the same standards as domestic goods. National Safety Requirements. Customs Requirements

PENALTIES. All imported products are required to meet the same standards as domestic goods. National Safety Requirements. Customs Requirements 1 of 15 Short Course On: Importation Requirements of Laser Products ICALEO 2006 Version 11-01-06wbkgrd Course Topics Discuss the penalties associated with improperly or illegally importing a laser product.

More information

What does doesn t a power supply have to comply with these days!

What does doesn t a power supply have to comply with these days! What does doesn t a power supply have to comply with these days! Sinziana-Iulia Cionca - Excelsys Technologies Ireland Christopher Siegl Excelsys Technologies North America March 29, 2017 Agenda Why comply

More information

Overview of Standards for CO Detection Products

Overview of Standards for CO Detection Products Overview of Standards for CO Detection Products Rev 1.1 1 General Overview... 3 2 Application and Installation Codes & Standards... 3 3 Product Standards... 4 4 Certified and Listed Products (Conforms

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61892-2 Edition 2.0 2012-03 Mobile and fixed offshore units Electrical installations Part 2: System design INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 47.020.60

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication IEC TR 60601-4-3 Edition 2.0 2018-12 REDLINE VERSION colour inside Medical electrical equipment Part 4-3: Guidance and interpretation Considerations of unaddressed safety aspects in the third edition of

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-6 Fifth edition 2002-07 Household and similar electrical appliances Safety Part 2-6: Particular requirement for cooking ranges, hobs, ovens and similar appliances Appareils

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 1 1775 Old Highway 8 NW, Suite 104 New Brighton, MN 55112 Mr. Barry Quinlan bquinlan@tuvam.com Phone: 978-573-2528 ELECTRICAL Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MOTOROLA PENANG ADVANCED COMMUNICATION LABORATORY Motorola Solutions Malaysia Sdn Bhd (455657-H) Plot 2A, Bayan Lepas Technoplex Industrial Park Mukim 12 SWD,

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60

More information

STANDARDS BULLETIN

STANDARDS BULLETIN June 2, 2008 STANDARDS BULLETIN 2008-08 CAN/ULC-S319-05, Electronic Access Control Systems FREQUENTLY ASKED QUESTIONS The following frequently asked questions (FAQ) is being issued in response to a request

More information