GENERAL CONTRACTOR NOTES GEN WALK-IN NOTES 1. E.C. TO VERIFY EXACT SIZE & LOCATION OF COMPRESSORS FOR WALK-IN BOXES W/ KEC & ARCHITECT.

Size: px

Start display at page:

Download "GENERAL CONTRACTOR NOTES GEN WALK-IN NOTES 1. E.C. TO VERIFY EXACT SIZE & LOCATION OF COMPRESSORS FOR WALK-IN BOXES W/ KEC & ARCHITECT."

Ronald Andrews
5 years ago
Views:

1 GENERAL CONTRACTOR NOTES SF Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO WARMING KITCHEN BEVERAGE SF 5. E.C. TO VERIFY EXACT SIZE & LOCATION OF. E.C. TO MOUNT & INTERWIRE VAPOR-PROOF 3. E.C. TO & MOUNT SERVICE DISCONNECTS. E.C. TO RUN MIN (5) # WIRES FROM COIL TO REST 3 TRASH 3 SF NOTE: KNEE WALL BY GS, OVERHEAD COILING DOOR BY GC 3 3 NOTE:COUNTER TO BE 3" HIGH, W/ MILLWORK TO MATCH CONFERENCE SF COILING DOOR BY GC WASH WARE 5 DISH DROP SF Centennial, CO MAIN KITCHEN KEC = KITCHEN EQUIPMENT CONTRACTOR, GC = GENERAL CONTRACTOR, PC = PLUMBING CONTRACTOR, MC = MECHANICAL CONTRACTOR, EC = ELECTRICAL CONTRACTOR, NIC = NOT IN CONTRACT. KITCHEN EQUIPMENT PLAN Addendum # thru # FS COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C.

2 ELECTRICAL SCHEDULE '-" 3'- /" '-6" 6 /" 78 '-5 /" '-8 /" SF 77 5'-" '-3 /" C 79 C 30 Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO '-5" 3'-" 66 6 SF 5 3. E.C. TO VERIFY EXACT SIZE & LOCATION OF. E.C. TO MOUNT & INTERWIRE VAPOR-PROOF 3. E.C. TO & MOUNT SERVICE DISCONNECTS. E.C. TO RUN MIN (5) # WIRES FROM COIL TO '-6" '-0" REST 3 6 6a '-3 /" '-0" 7" '-" '-0 /" 3'-3 /" C '-8" 3'-0" TRASH 3 SF 3'-6" 3'-3" 5 3 '-9" '- /" C 5'-5" 5'- /" 3 3'-3 /" 5'-" 7 /" 0" 3 30 ELECTRICAL NOTES 58 CONFERENCE SF 53 53a 5 '-0 /" 7'- /" '-3 /" /" '-6 /" '-9 /" 3'-8 /" 8'- /" 5'-0" '-" 6 6 C C 3'-7 /" '-" 3'-" 9 6'-5 /" WARE WASH '-0 /" 9" '-3" '-" '-7 /" SF NOTE: ROUGH-IN SHOWN FOR ALL EQUIPMENT, FUTURE AND OTHERWISE. Centennial, CO 80 9 '-8 /" " '-9" 8 7 3'-0 /" C 7" 7" 3a /" 3 C KITCHEN ELECTRICAL PLAN Addendum # thru # FS COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C.

3 PLUMBING SCHEDULE 6" 78 '-0" SF a 80 '- /" '- /" 30 Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO '- /" 66 6 SF 5. E.C. TO VERIFY EXACT SIZE & LOCATION OF. E.C. TO MOUNT & INTERWIRE VAPOR-PROOF 3. E.C. TO & MOUNT SERVICE DISCONNECTS. E.C. TO RUN MIN (5) # WIRES FROM COIL TO REST 3 TRASH 3 SF '-" '-3" 8" 0" 0 7 /" 5'- /" 5'-7" 60 58b 59 58a 58 5" '-6" '- /" '-5" '-5 /" CONFERENCE SF '-3 /" 3'- /" '-" '- /" 7 /" 5'-7 /" '-0 /" FD FD 0'-0 /" 6" 5a a '-0" '-7 /" '- /" 7 7a '-" 5 5a 5a 5'-" '-5" '-0" '-0 /" 6'-8 /" '- /" 5'-7" 5'-5" b 5" '-0 /" 5 '-0" WARE FD a WASH 9" '-6 /" '-5 /" 0 9 3'- /" '-5" '- /" '-" '-9 /" 0a a 5 3'-7 /" '-9" 3 5 SF PLUMBING NOTES Centennial, CO 80 3'-3" 7 '-9" 7a '-" 5a 5 8 /" 7'-5" '- /" NOTE: ALL VACUUM BREAKERS AND OR BACK FLOW PREVENTERS TO BE SUPPLIED AND INSTALLED BY PLUMBING CONTRACTOR. KITCHEN PLUMBING PLAN Addendum # thru # FS COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C.

4 NOTE: WALL BACKING NOT NEEDED IF ARE BLOCK OR CONCRETE 7/8" 00 7 SF 00 WALL PNL. 6"- 0 GAUGE SS EXTERIOR COVE BASE BY KEC. COORDINATE W/ BUILDING FLOOR CONDITIONS GROUT FILLER BY GC PIT DEPTH OF -/" AFF, W/ /" LEVELING SAND IF NEEDED. AFF DIMENSION DEPENDENT ON SPECIFIC WALK-IN SPECKED BY CLIENT. ALUMINUM FLOORING PER MANUFACTURES SPEC. W/ INTEGRAL COVED BASE, SIZED PER SPEC. BY KEC. FLOOR PNL. 6 MILL VISQUEEN VAPOR BARRIER BY KEC SEE SCHEDULE FOR EXACT SIZE AND PLACEMENT ALL WALL BACKING TO BE " x " WOOD 3-36" 36" " 60" NOTE: WALL SHELF HEIGHT TO 60" AFF FOR A SINGLE OR SHELF W/ POT RACK & SHELF. FOR A DOUBLE SHELF 56" AFF AND " MIN BETWEEN ND SHELF. 30 Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO '-6 /" '-8" S/S CORNER GUARDS BY KEC S/S WALL FLASHING BY KEC ROLL DOWN DOOR SNEEZE GUARD S/S CLOSURE PANELS ABOVE AND WALK-IN AS REQ. BY KEC 66 6 SF 5. E.C. TO VERIFY EXACT SIZE & LOCATION OF. E.C. TO MOUNT & INTERWIRE VAPOR-PROOF 3. E.C. TO & MOUNT SERVICE DISCONNECTS. E.C. TO RUN MIN (5) # WIRES FROM COIL TO ROLL DOWN DOOR - 3 8" REST 3 '-" TRASH 3 SF 8'- /" BACKING TO BE WOOD, "x" TYPE KITCHEN MARK: ITEM 50 ACCUREX MODEL STYLE / CONFIGURATION DIMENSIONS HEIGHT GREASE CUP OR DRAIN XBEW-05-S SINGLE WALL EXHAUST ONLY 05 IN. 5 IN. 30 IN. LEFT XBEW-05-S SINGLE WALL EXHAUST ONLY 05 IN. 5 IN. 30 IN. RIGHT TEMP. RATING TOTAL WEIGHT LOCATION LEFT RIGHT '-9 /" CONFERENCE SF '-8" 0" '-3" '-3" '- /" '-8 /" '- /" '- /" '- /" NOTE: SEE WALK-IN PIT DETAIL THIS SHEET, COORDINATE FLOOR FINISH WITH WALK-IN MANUFACTURE AND GC FOR SITE CONDITIONS. '-8" '-0 /" 0'-0" 9 /" '-0" 0'-0" WARE WASH '-8" 5 /" '-0" '-8" 3 /" 5 SF FIXTURE TYPE BULB / LAMP INFO # # PLENUM LOCATION ILLUMINATION DETAILS QTY TO END TO END INTENSITY FT CANDLES 00W A9 (BULBS NOT INCL.) 00W A9 (BULBS NOT INCL.) EXHAUST PLENUM COLLARS EXTERNAL PLENUM COLLARS GREASE FILTRATION DETAILS TYPE / MODEL MATERIAL / NA TOTAL EXHAUST CFM CFM / FT / NA TOTAL EXHAUST CFM CFM / FT / FRONT / NA / FRONT / NA TOTAL CFM - - FRONT AIR CURTAIN (ASP) PLENUM 0 7 CFM / FT / FRONT / NA / FRONT / NA TOTAL CFM - - FRONT AIR CURTAIN (ASP) PLENUM 0 89 CFM / FT 30 8 GAUGE WHERE EXPOSED UL LISTED W/ OUT EXHAUST FIRE DAMPER - UL #R565 BACK INTEGRAL AIR SPACE - 3 IN WIDE RIGHT NON-INTEGRAL AIR SPACE - 3 IN WIDE CONTINUOUS CAPTURE FACTORY MOUNTED EXHAUST COLLAR(S) LEFT UTILITY CABINET 30 IN HIGH 5 IN LONG IN WIDE INCLUDES PERFORMANCE ENHANCING LIP (PEL) TECHNOLOGY STANDING SEAM CONSTRUCTION FOR SUPERIOR STRENGTH FINISH FOR HIGH CORROSION RESISTANCE FIRE SUPPRESSION SYSTEM QTY 6 IN. 0 IN. 6 IN. 0 IN. HEIGHT 0 IN. 0 IN. MARK: ITEM 5 Centennial, CO 80 MANUFACTURER / MODEL SUPPRESSANT TYPE FLOW POINTS LINE DETECTION MOUNTING ANSUL R-0 WET CHEMICAL 5 UTILIZED 6 AVAILABLE CONTINUOUS FUSIBLE LINK LEFT END UTILITY CABINET ON FULL INSTALLATION (INCLUDES PRE-PIPED (S) WITH DETECTION AND FACTORY COORDINATED INSTALL) CHROME SLEEVES FOR FACTORY PROVIDED APPLIANCES DROPS - INCLUDED SUPPRESSION AGENT - INCLUDED -.5 GAL. - [().5, () 3.0 TANK(S)] GAS VALVE - INCLUDED - MECHANICAL SHUTOFF VALVE, IN, (ANSUL) - PART# 5560 REMOTE PULL STATION - STANDARD - INSTALLATION AT SINGLE POINT OF EGRESS METAL BLOW-OFF CAPS - INCLUDED ITEM 50 - ( 05.0 IN.) ITEM 50 - ( 05.0 IN.) FIRE SYSTEM PROTECTED (S) (UL-300) (MARK NAME / #) BUILDING CONDITIONS Addendum # thru # FS COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C.

5 30 Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO Issue/Revisions Date No. Centennial, CO 80 WALK-IN Compiled Set Addendum# # FS-5 COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C

6 NC NO COM RED BROWN BLACK BLACK USE 8 AWG, STRANDED PLENUM RATED WIRE H N H N L L L L C NO NC S SH TO LIGHT CIRCUIT H T-A T-B T-A T-B L L L3 L L L3 C C3 T T T3 T T T3 STH STN FROM LIGHT SWITCH W C3 NO3 NC3 C NO NC R G FAN USE 8 AWG, SHIELDED WIRE EXHAUST FAN EXHAUST FAN COMMON NORMALLY OPEN NORMALLY CLOSED COMMON NORMALLY OPEN NORMALLY CLOSED R G HANGING HEIGHT FOR FIRE SYSTEMS VERIFICATION OF HANGING HEIGHT ABOVE FINISHED FLOOR (A.F.F.) IS REQUIRED FOR CORRECT PLACEMENT OF FIRE SYSTEM NOZZLES. RECOMMENDED HANGING HEIGHT = 80" FROM FINISHED FLOOR TO LOWER FRONT EDGE OF. OTHER HANGING HEIGHT = " FROM FINISHED FLOOR TO LOWER EDGE OF. PLENUM HANGER BRACKET DETAIL HANGER BRACKET HANGING CLIP.6 CONTINUOUS CAPTURE PLENUM INSTALLATION DETAIL BOLT AND ACORN NUT PROVIDED U-CLIP SHIPPED ATTACHED TO RIGHT ANSUL R0 (WET CHEMICAL) FIRE PROTECTION SYSTEM - MODEL FSSC CONTROL PANEL. ENCLOSURE. AGENT TANK 3. EXPELLENT GAS CARTRIDGE. ANSUL AUTOMAN RELEASE 5. REGULATOR 6. KNOCKOUT FOR WIRING MICROSWITCH WIRING DIAGRAMS W/DPDT MICRO SWITCH DPDT SWITCHES PROVIDED BY MANUFACTURER MAY BE WIRED PER EXAMPLES SHOWN. VERIFY WITH LOCAL CODES AND EQUIPMENT SUPPLIED AS THE CONNECTION NEEDED FOR YOUR INSTALLATION. CONNECTION TO BUILDINGS ALARM TYPE KITCHEN MARK: ITEM 50 ACCUREX MODEL STYLE / CONFIGURATION DIMENSIONS HEIGHT GREASE CUP OR DRAIN XBEW-05-S SINGLE WALL EXHAUST ONLY 05 IN. 5 IN. 30 IN. LEFT XBEW-05-S SINGLE WALL EXHAUST ONLY 05 IN. 5 IN. 30 IN. RIGHT FIXTURE TYPE BULB / LAMP INFO # ILLUMINATION DETAILS QTY TO END INTENSITY FT CANDLES 00W A9 (BULBS NOT INCL.) 00W A9 (BULBS NOT INCL.) EXHAUST PLENUM COLLARS TEMP. RATING TOTAL WEIGHT GREASE FILTRATION DETAILS TYPE / MODEL MATERIAL LOCATION LEFT RIGHT QTY HEIGHT / NA TOTAL EXHAUST CFM CFM / FT 6 IN. 0 IN. 6 IN. 0 IN. 0 IN. 0 IN PLENUM HANGER BRACKET "C" CLAMP STANDING SEAM HANGING CLIP ON S OVER 0" HANGING CLIP BOLTED TO PLENUM SHELL HANGER BRACKET DETAIL NOT TO SCALE REFERENCE SCALED DRAWING FOR ACTUAL LOCATIONS THREADED ROD (/") WASHER HANGER BRACKET /" NUT.6 5 NOT TO SCALE NOTES: 6.5 Wet chemical fire protection system to be Ansul R-0, designed in compliance with UL 300 requirements. -Verification of all cooking equipment make, model and location required for all fire protection systems. -All fire system piping is standardly to the right end of the hood unless a wall is located on the right end. -Ansul Automan Release to be located within 60" of hood. The basic fire system will include the following: -Gas shut-off valve, if required, to be supplied by Manufacturer (up to " diameter as standard), and installed by a licensed plumber. -Micro switch to be supplied by Manufacturer for connection to, but not limited to, building alarm system(s), exhaust and supply fans and electrical power shut down. Field wiring and connections to be performed by a licensed electrician. The basic fire system does NOT include the following: -Full dump test other than wht is specified per the installation manual, or to satisfy a state or local code. Permit and testing fees are not included unless noted under the equipment schedule for the fire system. -More then two trips to the jobsite or special transportation, or overnight lodging requirements in remote areas. Normal travel distance is first 50 mi. (80.5 km) from office. - Special classes or additional labor for access to security sensitive areas. -Installation of gas shut-off valve. -Special drawings required to satisfy state or local code. Plan examination fees, PE or FS Approval Stamp. -Union labor, Government labor, or Prevailing wages required for final field hook-up. -Any and all electrical components/connections required to shut down fans, shut off device for electric cooking equipment (shunt trip breaker), or activate an alarm system, etc. -Any dismantling or reassembly required to gain access to the fire suppression piping located on the top of the hood. -Rough-in hidden conduit for remote pull station or gas valve (flush mounted pull station). -Installation of more than () remote pull stations or distances greater than 0 ft (6.M.) -Parts or labor required to correct piping due to cooking equipment changes or deviation from plans. OR Any charges for missing or additional parts other then those indicated on the Fire Suppression Detail. 7.5 CONNECTION TO COOKING EQUIPMENT SHUT DOWN POWER TO COOKING EQUIPMENT SHUNT TRIP BREAKER ELECTRIC GAS VALVE - IF RESET RELAY IS USED SEE OPTION A OR B AT RIGHT, MECHANICAL GAS SHUT OFF VALVE DOES NOT REQUIRE ELECTRICAL CONNECTION. CONNECTION TO FAN SHUT DOWN MANUAL SWITCH FAN STARTER NOTES:. DENOTES FIELD INSTALLATION.. DENOTES FACTORY INSTALLATION. 3. DO NOT USE BLACK WIRE ON SNAP-ACTION SWITCH IN NORMAL INSTALLATION. BLACK WIRE TO BE USED ONLY FOR EXTRANEOUS ALARM, LIGHT CIRCUITS, ETC. / NA TOTAL EXHAUST CFM CFM / FT # PLENUM LOCATION TO END EXTERNAL PLENUM COLLARS / FRONT / NA / FRONT / NA TOTAL CFM - - FRONT AIR CURTAIN (ASP) PLENUM 0 7 CFM / FT / FRONT / NA / FRONT / NA TOTAL CFM - - FRONT AIR CURTAIN (ASP) PLENUM 0 89 CFM / FT 30 8 GAUGE WHERE EXPOSED UL LISTED W/ OUT EXHAUST FIRE DAMPER - UL #R565 BACK INTEGRAL AIR SPACE - 3 IN WIDE RIGHT NON-INTEGRAL AIR SPACE - 3 IN WIDE CONTINUOUS CAPTURE FACTORY MOUNTED EXHAUST COLLAR(S) LEFT UTILITY CABINET 30 IN HIGH 5 IN LONG IN WIDE INCLUDES PERFORMANCE ENHANCING LIP (PEL) TECHNOLOGY STANDING SEAM CONSTRUCTION FOR SUPERIOR STRENGTH FINISH FOR HIGH CORROSION RESISTANCE FIRE SUPPRESSION SYSTEM MANUFACTURER / MODEL SUPPRESSANT TYPE ANSUL R-0 WET CHEMICAL FLOW POINTS 5 UTILIZED 6 AVAILABLE LINE CONTINUOUS DETECTION FUSIBLE LINK FULL INSTALLATION (INCLUDES PRE-PIPED (S) WITH DETECTION AND FACTORY COORDINATED INSTALL) CHROME SLEEVES FOR FACTORY PROVIDED APPLIANCES DROPS - INCLUDED SUPPRESSION AGENT - INCLUDED -.5 GAL. - [().5, () 3.0 TANK(S)] GAS VALVE - INCLUDED - MECHANICAL SHUTOFF VALVE, IN, (ANSUL) - PART# 5560 REMOTE PULL STATION - STANDARD - INSTALLATION AT SINGLE POINT OF EGRESS METAL BLOW-OFF CAPS - INCLUDED MARK: ITEM 5 MOUNTING LEFT END UTILITY CABINET ON 30 Blake Street, Suite 00, CO Main Street, Unit C0 Edwards, CO ITEM 50 - ( 05.0 IN.) ITEM 50 - ( 05.0 IN.) FIRE SYSTEM PROTECTED (S) (UL-300) (MARK NAME / #) 0.0 REAR INTEGRAL AIR SPACE 0.0 REAR INTEGRAL AIR SPACE AIR SPACE PERFORATED AIR CURTAIN CONTROL PANEL UL LISTED LIGHT FIXTURE CHROME APPLIANCE DROPS ABOVE FINISHED FLOOR UL LISTED STANDARD FILTERS REMOVABLE GREASE CUP W/ CONCEALED GREASE TROUGH INTEGRAL AIRSPACE Kitchen Fan Control Center (XFCC) Electrical - Field Wiring Schematic BUILDING BREAKER PANEL 0/ 5 AMPS 0/ 5 AMPS 08/3 NOTE: POWER FOR FAN FEEDS DIRECTLY FROM BREAKER PANEL TO FAN (REFER TO MAKE UP AIR DETAIL) POWER WIRING FOR XFCC CONTROL SYSTEM INPUT CONTROL NON-SHUNTED LIGHTS INPUT POWER OUTPUT SHUNT TRIP COIL 0V OUTPUT DURING FIRE LIGHTS 0V OUTPUT TO LIGHTS SHUNT TRIP BREAKER IN BUILDING PANEL (PROVIDED BY OTHERS) WIRE TO ALL LIGHTS TO OPERATE WITH LIGHT CIRCUIT (00W MAX) MARK: MAU- HP 5/ 0 AMPS MARK: KEF- HP 5/ 0 AMPS MARK: KEF- HP OR 3 R YW Kitchen Fan Control Center (XFCC) Electrical Prewire Package TC CONTROL INPUT: 0VAC, 5AMPS FROM BREAKER 5 9 TC 0-38BLM CONTROL PANEL Installation Location: Left Cabinet on Mark: Item 50 Exh FAN Exh FAN 3 ELECTRICAL CONTROL BOX DESCRIPTION / ACCUREX MODEL MOUNTING LOCATION (CONTROL PANEL / SWITCHES) EXHAUST FAN QTY FAN QTY MARK: CP- POWER FREQUENCY KITCHEN FAN CONTROL CENTER / XFCC UTILITY CABINET ON / (UTILITY CABINET - LEFT END OF ) 60 CYCLE CONTROL PANEL ENCLOSURE - 6 GA 300 SERIES ENCLOSURE (NEMA-) - DIMENSIONS X 8 X 6 CONTROL PANEL ENCLOSURE - FACTORY MOUNTED - LEFT CABINET ON ITEM 50 WIRING DIAGRAM #: T0-8 B LM - STARTERS PROVIDED IN CONTROL PANEL - QTY POSITION FAN SWITCH - QTY INTEGRATED EXHAUST TEMPERATURE INTERLOCK SYSTEM -FACTORY MOUNTED EXHAUST TEMPERATURE SENSORS - QTY -COMPLIES WITH INTERNATIONAL MECHANICAL CODE POSITION LIGHT SWITCH - QTY TURN ON EXHAUST IN FIRE LIGHTS OUT IN FIRE MUA INTERFACE POWER FOR SHUNT TRIP SPEED FAN(S) CONTROL PANEL FACTORY WIRED TO FIRE SYSTEM D3 D D TS TS FIRE SYSTEM MICROSWITCH SWITCH(ES) FACTORY WIRED TO J-BOX ON TOP OF FAN SWITCH UTILITY CABINET MOUNTED LIGHT SWITCH UTILITY CABINET MOUNTED SENSOR MARK QTY LOCATION Item 50 Section CAPTURE TANK Item 50 Section CAPTURE TANK Possible Sensor Locations: Duct Collar Shipped Capture Tank Loose for Field Installation SENSORS TO BE WIRED INDEPENDENTLY FIRE SYSTEM MICROSWITCH FAN SWITCH LIGHT SWITCH * CONTACTS ARE RATED UP TO 50VAC AND 8 AMPS CONTROL WIRING FOR XFCC CONTROL SYSTEM INPUT OUTPUT MUA CONTROL WIRING * * SPARE, CONTACTS ON/OFF WITH FIRE SPARE, CONTACTS ON/OFF WITH FIRE COMMON VAC MUA UNIT CONTROL CENTER TEMPERATURE SENSOR TEMPERATURE SENSOR Note(s):. All wiring to be done by certified and qualified. Power wiring is the responsibility of the electrician. persons and must be wired to all local & national codes. Control wiring is the responsibility of controls contractor.. Exhaust and supply fan(s) shown as typical for If there is no controls contractor, both power and control representation of the fan. For exhaust or supply fan wiring is the responsibility of the electrician. detail see fan submittals. 5. All ground wiring not shown on above diagram for 3. Exhaust and/or supply fans may be shown more than clarity. once for purpose of separating power versus control 6. For further instructions please see the XFCC wiring. Installation and Operations Manual that was shipped with panel, or contact ACCUREX's Kitchen Ventilation team at T-A T-B T-A T-B TEMPERATURE INTERLOCK CALIBRATION. PRESS THE SET BUTTON TO SEE THE FIRST SET POINT. (PRESS THE SET BUTTON TWICE, SLOWLY TO SEE THE SECOND SET POINT). PRESS THE UP/DOWN ARROW BUTTON TO CHANGE THE SET POINT. 3. PRESS THE SET BUTTON TO VIEW THE CURRENT TEMPERATURE.. CHECK SYSTEM OPERATION BEFORE MAKING ADDITIONAL ADJUSTMENTS Switches Mounting - Utility Cabinet - Left End of Hood LIGHT INPUT: 0VAC, 5AMPS FROM BREAKER CONNECTIONS TO TEMPERED MUA FAN TYP. THRU ALL EXHAUST STARTERS TORQUE: FIELD WIRING: LABEL DESCRIPTION Control Panel Factory Wired to Fire System Mark: Item 5 NOTES: Drawing shown de-energized at L (term. #H), w/ Fire System armed (non-fire mode). (normal operation, R & R are energized) If wall mounted prewire, or field installed fire system, the fire system microswitches must be field wired. UL LISTED Belt Drive Upblast Centrifugal Roof Exhaust Fan Qty Tempered Make-Up Air Unit Mark: MAU- Accurex Operating Motor Information Qty Volume FRPM Weight Model Power V/C/P Encl: Motor MCA Total SP Size Windings RPM 3, in. wg XDG--H0 RPM.58 hp 9 lb hp 08/60/3 ODP 75 CFM.358 in. wg Type Gas Type Temperature Heating Winter DB Max Δ Max LAT Input Energy Output Efficiency Direct Gas Natural - F F.0 F 9% 3/" MBH MBH Cooling Type Evaporative Cooling Media CELdek Dry 9 F Cooling Summer Bulb 65 F Filters in. Aluminum Mesh Gas Cooling Control Automatic Drain Flush Valve-By Factory **Required flow and inlet pressure are for supply line sizing only. They do not represent water usage during normal operation. Consult factory for actual water usage. 6.5 Accurex Model Volume SP Total SP FRPM (in wg) Wet Outlet Sound Power By Octave Band LwA - A weighted sound power level based on ANSI S. dba - A weighted sound pressure level base on.f db attenuation per octabe band at 5.0 ft. Noise Criteria (NC) based on an average attenuation of.5 db per octabe band at 5.0 ft. Operating Weight Motor Information Power (hp) (Lb.) Size (hp) V/C/P Encl: LwA 80.3 Motor RPM Building Gas Pressure Control Access / PSI Right-Hand Required Flow** dba 69.3 MARK: KEF- Windings FLA.5 XRUB-0HP-30,00, /60/3 OP UL/cUL 76 Listed - "Power Ventilators for Rest. Exh. Appliances" Switch, NEMA-, Toggle, Junction Box Mounted & Wired Roof Curb-Galv., GPFV-3-G0, Under Sized in. Total Hinged Base (Attached) Curb Seal (Attached) Grease Trap (PN 75538) Heat Baffle (Attached) Bearings with Grease Fittings, L0 life of 00,000 hrs (L50 avg. life 500,000 hrs) NA Sones 7.5 Centennial, CO CURB ACTUAL DUCT CURB ACTUAL Make-up air unit shall be IRI & ETL listed to ANSI Z83. and CAN 3.7 Unit Insulation - DuctLiner - Heat Source On Air Flow Arrangement - Outdoor Air Only - 00% OSA Horizontal Unit - No Weatherhood Provided Discharge Position - Downblast - No Diffuser Inlet Damper Inlet Air Sensor - Heating & Cooling Control Center Factory Finish - Galvanized Blower Isolation - Neoprene Flame Sensing - FlameRod IgnitionControl - DirectSpark Temperature Control - Discharge Roof Curb - GPI 3.5 in. (W) x 8.5 in. (L) x 0 in. (H) - Galvanized - in Insulated MARK: KEF- * Note: Roof openings can be as large as the curb size - 3.5" or as small as the duct size + /" Exhaust Duct Suggested Roof Opening.0 SQ 6.5 SQ TOP VIEW.8 Dia KITCHEN EXHAUST Hinged Base Flat Roof Curb ISOMETRIC VIEW Addendum # thru# FRONT VIEW FS COPYRIGHT 03 - DAVIS PARTNERSHIP, P.C.

Type 1, Baffle Filter Single Wall - Exhaust Only Wall Canopy. Height (in.) Exhaust SP (in. w.g.) XBEW

Mark: Hood-1 XBEW Type 1, Baffle Filter Single Wall - Exhaust Only Wall Canopy Model Hood Length (in.) Width (in.) Bottom Width (in.) Front Height (in.) Back Exhaust Volume (CFM) Exhaust SP (in. w.g.)