Complete Gas Analysis

Transcription

1 Complete Gas Analysis

2 A complete range of gas analysers, systems and accessories for emissions, air quality, research and process monitoring. The Signal Group, incorporating the gas analysis business of both Rotork Analysis and ADC, has been manufacturing gas analysers and systems for over twenty five years. Innovative product design, an in-depth knowledge from years of experience and an ISO001 quality system give clients solutions for ever more demanding requirements. Automotive Our mission is to supply our customers with the most accurate Automotive and high specification analysers and CEMs systems, at the best price, with world class service and support. Air Quality John Clements, Managing Director, Signal Group Limited. Gas Analysers Automotive Emissions The MAXSYS series of automotive emission systems Sample Handling are flexible and powerful enough to meet all international measurement standards, including US EPA and European ECE. Test Equipment Using Signal series III analysers the MAXSYS systems provide testing to automobile manufacturers and engine makers through research laboratories and educational establishments. The MAXSYS is able to integrate to almost any test cell ADC gas analysis host or operate using Signal s own suite of software. OEM analysers An extensive range including:- Engine emissions & EGR analysis. Systems Vehicle test and certification. Test cell computing. CVS and dilute sampling. Pre and post catalyst analysis. Marine diesel research and compliance. Service & Support Specialist configurations for R & D Gases : THCs, NO, NO, NOx, CO, CO, O, N O Automotive CVS system Mobile emissions vehicle

3 An extensive range of Fixed, Portable and OEM gas analysers that deliver performance, durability and value. Series III Individual Gas Analysers A family of microprocessor controlled, high precision VOC monitoring for environmental compliance. gas analysers for combustion, research, industrial, The range includes portable and fixed monitoring automotive, process and compliance monitoring. systems. NOx, O, SO, CO, CO, and hydrocarbon 1100-UV for SO measurements for combustion monitoring and 3000-Flame Ionisation Detector for VOCs research from industrial and automotive 4000-Chemiluminescence for NOx applications NDIR for CO and CO Process monitoring of hydrocarbons, oxygen and 7000-GFC NDIR for CO, CO, SO, NO, N O other gases in combustion, incineration and a 000-Paramagnetic for O wide variety of manufacturing industries. 41-Luft IR for all IR absorbing gases Detection and analysis of toxic gases for health and safety. Common features include:- Unusual gases analysed for research and Compact 1 rack mounting (excluding portable units). development. Simple intuitive interface. CO monitoring from thermal oxidisers. Stand alone smart analysers or as modular building blocks VOC monitoring from chemical, solvent use and for system integration. other processes. Automatic operation with auto-cal, auto-range, auto-purge. Built in diagnostics and configurable alarms. This list represents a fraction of the applications year warranty. covered, please contact us for more information. The Series III Model 41, series range of 3U, 1 III, Luft infra red rack or bench analyser analysers The ADC range of Infra red gas analysers Signal manufacture, support and service the ADC range of The large range of Infra red analysers available Luft, RF and SB analysers, plus systems including the includes standard combustion gases through to WA154 combustion analysis trolley. bespoke applications. Portable heated FIDs for VOC monitoring There are two Signal portable heated flame ionisation monitors; Spot check and longer term monitoring for the 3010, a compact, lightweight unit with integral heated process improvement, environmental compliance line, and the more sophisticated microprocessor driven and health and safety. 3030PM. Both allow short and long term monitoring MINIFID, portable heated FID Model 3030PM microprocessor operated heated portable FID

4 Sample handling, test equipment and an enviable range of OEM analysers to ensure your analysers and systems deliver accurate results. Sample Handling An wide range of sampling and conditioning Extraction of samples from stacks etc. products that can be used with Signal or Conditioning of sample gases prior to transport and/or analysis. other manufactures analysers and systems Transport of sample gases at elevated temperatures to prevent losses. Sample probes for vents, stack etc. including heating, filtration and self cleaning. Filtration to remove particulate matter. Heated sampling lines and temperature Fast multipoint sampling (both hot and cold) - controllers. thus keeping costs down. Prefilters and distribution ovens. Rapid removal of moisture prior to cold gas Multipoint selectors. analysis (eg CO by infra-red) Cooler dryers and air purifiers. Air clean up systems for zero checking and FID air supplies. Heated dual prefilter Cooler dryers up to 6 litre/min Test Equipment Conversion prior to gas analysis. Analyser test and calibration products include:- Calibration and linearity checking of gas analysers. Reduction in calibration gas bottle usage. NOx and NH 3 converters. Checking the effieciency of NOx analysers Gas dividers and blenders. and converters. NOx converter efficiency tester. Gas blender (top) and Divider NOx converter tester An extensive range of OEM analysers Signal group has probably got the analyser you require, if we haven t we will try and produce it from our extensive suite covering NOx,CO,CO, SF6, Toluene, VOCs, the list is too long, please call us to discuss your requirement.

5 Completely integrated systems for:- Environmental compliance, process monitoring and ambient air quality. Continuous Emissions The EMIRAK is an integrated, extractive, compliance Continuous emission monitoring monitoring system for tomorrow s environment. for:- Environmental compliance. Extractive monitoring allows the choice of the most Gas fired power stations. appropriate analytical technique, providing higher accuracy Industrial processes. and sensitivity. Exceedance and process feed back. Wet and dry techniques can be mixed and analysis of Plus:- moisture, hydrocarbons and oxygen can all be measured Research and development. from one point. Consultancy. The EMIRAK software provides a flexible, powerful and easy Industrial air monitoring. to use interface. Features include automatic operation with remote control Gases measured: NO, NO, NOx, SO, and automated data reporting. CO, CO, O, VOCs The Emirak CEM system On-stack probes for Emiraks Ambient Air Quality Signal manufacture both individual stand alone Air quality monitoring for:- analysers and the next generation, fully integrated National and regional goverment AMBIRAK system. departments. Industrial sites for compliance to The AMBIRAK, developed in conjunction with local and legislation. national government authorities, overcomes the limitations Power generation monitoring. of traditional stand alone analysers. Consultancies. AMBIRAK includes all the analysers, logging systems and Plus:- complete diagnostics in one compact unit. Low level monitoring of air and gas for Offering automated data collection, data dissemination and process, research and development. data reporting (to WHO, EU guidelines etc), complete with full remote access and operation from your desktop. Gases measured: VOCs, CO, NO, NO, NOx, SO, O 3, H S, NH 3 Ambirak AQM system inside housing A complete AQM station

6 Custom and standard gas monitoring systems for the widest range of applications. Signal have the ability to build the widest range of systems for both UK and overseas customers. These along with our instruments are supported by a representative network that spans the globe Small Systems Incorporating Signal s wide range of analysers, (series Heated and non heated FIDs for VOC monitoring from stacks and vents III, ADC, Ambient, etc), sample handing accessories, Infrared analysers system integration and software (SIGEMS for control, for CO and CO switching, logging and reporting) to provide fixed monitoring in gas solutions for a broad scope of applications appliance testing M u l t i p o i n t hydrocarbon monitoring from carbon bed scrubbers and CO monitoring from thermal oxidisers in VOC abatement processes Gas quality checking Combustion analysis during manufacture trolley WA154 for Heated simultaneous gas fire and boiler Hydrocarbon monitoring in incinerators to dual NOx analyser conformance testing European standard CEN Complete after sales service and support Signal has an extensive network of UK service engineers as well as representatives in every continent trained to install, commission and maintain the large and expanding customer base Training, service contracts, extended warranties and upgrades support Signal customers through the lifetime of the equipment to ensure maximum results Distributed in the U.S. by: KBW Environmental Equipment Co., Willow Grove, PA (15) Signal Group Limited Instruments Division Standards House Doman Road Camberley Surrey GU15 3DF Tel: +44(0) Fax: +44(0) instruments@signal-group.com Signal Group Limited Ambitech Division Regal Way Faringdon Oxfordshire SN7 7BX Tel: +44(0) Fax: +44(0) ambitech@signal-group.com Issue GENBRO5/1/001