Running Magnet 2.0 Suspension Down High-tech LED lighting system for interior architecture

Transcription

1 Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light elements snap in place and connect automatically though the magic of magnets. Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured corners complete the system that can run up, around and across walls and ceilings. es align perfectly. Linear LED and accent fixtures, available in a variety of sizes, can be exchanged and repositioned quickly, without tools, with artistic results. The Running Magnet is perfect for retail displays where frequent changes are typical and absolute performance is mandatory. RECESSED SURFACE SUSPENSION UP & DOWN Lamps Multi Spot: 10W, 4x210lm, K, 80 10W, 4x210m, K, 80 Mini Glo-ball: 7W, 800lm, K, 80 7W, 880lm, K, 80 Mini Glo-Ball S: 3.5W, 400lm, K, W, 440lm, K, 80 Find Me Suspension: 8W, 560lm, K, 8W, 600lm, K, Spot Module: 8W, 600lm, K, 8W, 550lm, K, Light Strip, 11.8 : 7.5W, 460lm, K, 7.5W, 435lm, K, Light Strip 23.6 : 15W, 920lm, K, 15W, 870lm, K, Light Strip 35.4 : 22.5W, 1380lm, K, 22.5W, 1305lm, K, Light Strip 47.2 : 30W, 1840lm, K, 30W, 1740lm, K, Spot 120: 12.5W, 1060lm, K, 12.5W, 985lm, K, Notes Consult factory for other ceiling types including accoustic tile ceilings and wood. Construction Extruded aluminum housing with integral DALI controllable track system. 13 of suspension aircraft cable is standard Electrical 24V electrical systemlimited to a maximum load of 4A and 100W per driver. Spot and linear luminaires available with individually addressable DALI circuitry,0-10v Dimming (from 10% up to 100%) or built-in dimmer on each fixture head. EC to supply site cabling from driver to track location and site UL listed enclosure. Suspension Profile Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths. Each feed profile comes with two end caps. Available lengths: 39.4, 59, 78.7 and 98.4 All linear profiles are field cuttable. Corners available for continuous runs. Track can not be powered through corners. Corners are not field cuttable. Photometrics For current IES files please visit architectural.flosusa.com Warranty 2 years from date of sale. Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards for commercial interiors. 8 Page 1 of 10

2 Luminaries Light Strip Module HE Spot Module Multi Spot Spot 120 Find Me Suspension Anthony Spot Track Mini Glo-Ball Mini Glo-Ball Suspension Dimming Protocol or Variant Page 2 of 10

3 Profiles The extruded aluminum housing creates a clean 1-3/8 slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until after installation. DETAIL A L DETAIL A 1.6 [40mm] SECTION : Remote SECTION : Surface mounted Canopy 5 [127mm] 0.6 [15mm] 2.5 [63.5mm] 4.5 [114mm] STAINLESS STEEL CABLE ENDCAP 0.14 [4mm] 3.9 [100mm] 1.4 [35mm] MAX [4000mm] STAINLESS STEEL CABLE MAX [4000mm] FIELD ADJUSTABE LENGHT 3.9 [100mm] CEILING MOUNT TO DRIVER CANOPY 1.4 [35mm] 1.6 [40mm] 1.6 [40mm] ex Length Feed Unit Profile Intermediate Profile Delivered lumens Up Light Variant 39.4 (1 m) lm 59 (1.5 m) 78.7 (2 m) lm 1262 lm. = UL version 98.4 (2.5 m) lm Page 3 of 10

4 Corners The extruded aluminum housing creates a clean 1-3/8 slot that can be run up, around and across walls and ceilings. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps are included with each power feed profile. Internal foam for opening support should not be removed until after installation. Horizontal Corner ex Dimension º corner Variant 5.9 x = UL version 4.6 Optional Accesories Description Image QTY Endcaps The Endcap come as standard with the feed profile. Part number to be order in case of loss or if the installation is exclusively composed of intermediate elements.. End connector included Cover Plate For remote installations 4.5 RM -C -B (Black) RM -C -W (White) 0.3 Dimming controllers Image QTY Description Drawing A Dimming Control Unit Box 24V 0-10V Required for a 0-10V Dimming installation. 1 DCU can control up to 25 fixtures , Page 4 of 10

5 Required Drivers Image QTY Item Number Description Drawing LEDSB96W24V-NDM-D01 24V/96W, V, Magnitude, UL Listed LEDSB60W24V-NDM-D01 24V/60W, V, Magnitude, UL Listed LEDSB30W24V-NDM-D01 24V/30W, V, Magnitude, UL Listed LEDSB96W24V-NDM-U01 24V/96W, V, ERP, UL Listed LEDSB60W24V-NDM-U01 24V/60W, V, ERP, UL Listed LEDSB40W24V-NDM-U01 24V/40W, V, ERP, UL Listed 3, U U Surface mount canopy Non Dimmable for Running Magnet Suspension Up&Down includes: 1 drivers: 96W, 24V, VAC input, UL listed U A1V 08U A1V Surface mount canopy Dimmable for Running Magnet Suspension Up&Down includes: 1 driver: 96W, 24V, VAC input, UL listed 1 Dimming Control Unit Box: A Page 5 of 10

6 Light Strip Module HE Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from %, DALI and 0-10V from %. Clear end caps included for continuous look when installing end-to-end. 2.8 SEE TABLE 1.3 ex Light Strip Length Initial Delivered Beam Dimming Protocol 11.8 (300mm) W 105º (600mm) 35.4 (0mm) W 105º 22.5W 105º = Dimmable on board.dd = DALI.9V = 0-10V 47.2 (1200mm) W 105º Spot Module Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from %, DALI and 0-10V (from %). Standard beam spread is 14. Additional interchangeable lenses available in 23 and 33, and 10 x 40 elliptical beam spread. ex A Initial Delivered Beam Dimming Protocol W 14º A = Dimmable on board ADD = DALI W 14º A9V = 0-10V 5.16 Optional Accessories Image Description º Flood Lens Accessory 23 ø Wide Flood Lens Accessory º Elliptical Lens Accessory Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing) Page 6 of 10

7 Multi Spot 4 4 accent Spot LED module can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture (from %), DALI and 0-10V (from %). Standard beam spread is 14 additional interchangeable lenses available in 20 and 30, and elliptical beam spread ex Initial Delivered Beam Dimming Protocol 4 X W 11º = Dimmable on board.dd = DALI 4 X W 11º V = 0-10V Optional Accessories Image Description Flood Lens Accessory Wide Flood Lens Accessory Elliptical Lens Accessory Spot 120 Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture (from %), DALI and 0-10V (from %) Standard beam spread are 25º and 33º. Honeycomb and cross baffle included. ex Initial Delivered * Beam 0-10V Dimming W 14W 25º = Dimmable on board (12.5W).DD = DALI (14W).9V = 0-10V (14W) W 14W 33º * Dimmable on board 12.5W, DALI and 0-10V Dimming fixtures are 14W 7.87 ø 1.8 Page 7 of 10

8 Anthony Spot Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture (from %), DALI and 0-10V (from %) Standard beam spread are 15º and 22º. ex Initial 1310 Delivered W Beam 15º Dimming Protocol W 16W 15º 22º A = Dimmable on board ADD = DALI A9V = 0-10V W 22º ø 110 Optional Accessories Image Description A Elliptical lens A Honeycomb Flood lens. To obtain flood optics (35º) order Anthony Spot Medium + flood lens. Page 8 of 10

9 Other Light Module Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets. Built-in dimming knob allows fixture to dim from %, DALI and 0-10V from %. Mini Glo -Ball Mini Glo - Ball Suspension Find Me Suspension [ mm] MAX. 118 [ mm] MAX. 3.3 ø ø 4.3 ø 1.3 ex B Initial s Delivered s Dimming Protocol Mini Glo - Ball W 7W B = Dimmable on board.dd = DALI.9V = 0-10V ex B Initial s Delivered s Dimming Protocol Mini Glo - Ball Suspension W 3.5W B = Dimmable on board.dd = DALI.9V = 0-10V ex C Initial Delivered Beam Dimming Protocol W 14º = White C = Dimmable on board Find Me Suspension.DD = DALI W 14º = Chrome.9V = 0-10V Page 9 of 10

10 A. Select and position corners Horizontal - Connect sections on flat surfaces ( corner) C. Drivers Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver. B. Fill lengths between corners with Linear Housings 3.3, 4.9, 6.6 or 8.2 sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together. D. Select Light Modules Linear strips are available in five nominal lengths: 1, 2, 3, 4 and 5. Individual units can be adjusted from % with a built-in dimming knob and DALI and 0-10V from % Visit FLOS Worldwide YouTube channel for installation videos Page 10 of 10