Australian/New Zealand Standard

Size: px
Start display at page:

Download "Australian/New Zealand Standard"

Transcription

1 AS/NZS :2012 IEC , Ed. 6.0 (2011) AS/NZS :2012 Australian/New Zealand Standard Explosive atmospheres Part 0: Equipment General requirements

2 AS/NZS :2012 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee EL-014, Equipment for Explosive Atmospheres. It was approved on behalf of the Council of Standards Australia on 3 February 2012 and on behalf of the Council of Standards New Zealand on 31 January This Standard was published on 22 February The following are represented on Committee EL-014: Auckland Regional Chamber of Commerce Australian Chamber of Commerce and Industry Australian Coal Association Australian Industry Group Australian Institute of Petroleum Australian Institute of Refrigeration, Air Conditioning and Heating Australian Petroleum Production and Exploration Association Australian Pipeline Industry Association Bureau of Steel Manufacturers of Australia Consult Australia Department of Employment, Economic Development and Innovation, Qld Department of Trade and Investment, Regional Infrastructure and Services, NSW Electrical Compliance Testing Association Electrical Contractors Association of New Zealand Electrical Regulatory Authorities Council Energy Networks Association Engineers Australia Environmental Risk Management Authority New Zealand Institute of Electrical Inspectors Institute of Instrumentation, Control and Automation Australia Institution of Professional Engineers New Zealand Mining Electrical and Mining Mechanical Engineering Society Ministry of Economic Development, New Zealand National Electrical and Communications Association New Zealand Employers and Manufacturers Association (Central) The Aviation and Marine Engineers Association WorkCover New South Wales Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about joint Australian/New Zealand Standards can be found by visiting the Standards Web Shop at or Standards New Zealand web site at and looking up the relevant Standard in the on-line catalogue. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organization. We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia or Standards New Zealand at the address shown on the back cover. This Standard was issued in draft form for comment as DR AS/NZS

3 AS/NZS :2012 Australian/New Zealand Standard Explosive atmospheres Part 0: Equipment General requirements Originated as AS/NZS :2000. Third edition Fourth edition COPYRIGHT Standards Australia Limited/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher, unless otherwise permitted under the Copyright Act 1968 (Australia) or the Copyright Act 1994 (New Zealand). Jointly published by SAI Global Limited under licence from Standards Australia Limited, GPO Box 476, Sydney, NSW 2001 and by Standards New Zealand, Private Bag 2439, Wellington 6140 ISBN

4 ii 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EL-014, Equipment for Explosive Atmospheres, to supersede AS/NZS :2008. The objective of this Standard is to specify the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres. This Standard is identical with, and has been reproduced from IEC , Ed. 6.0 (2011), Explosive atmospheres, Part 0: Equipment General requirements. As this Standard is reproduced from an International Standard, the following applies: (a) Its number appears on the cover and title page while the International Standard number appears only on the cover. (b) (c) In the source text this part of IEC and IEC should read this part of AS/NZS and AS/NZS respectively. A full point substitutes for a comma when referring to a decimal marker. References to International Standards should be replaced by references to Australian or Australian/New Zealand Standards, as follows: Reference to International Standard Australian/New Zealand Standard IEC AS Rotating electrical machines Rotating electrical machines Part 1: Rating and performance Part 1: Rating and performance Part 5: Degrees of protection Part 5: Degrees of protection provided by the integral design of provided by the integral design of rotating electrical machines rotating electrical machines (IP Code) Classification (IP Code) Classification Degrees of protection provided by enclosures (IP Code) Degrees of protection provided by enclosures (IP Code) Low-voltage switchgear and Low-voltage switchgear and controlgear controlgear Part 1: General rules Part 1: General rules IEC AS/NZS Explosive atmospheres Explosive atmospheres Part 1: Equipment protection by flameproof enclosures d Part 1: Equipment protection by flameproof enclosures d Part 2: Equipment protection by pressurized enclosures p Part 2: Equipment protection by pressurized enclosures p Part 5: Equipment protection by powder filling q Part 5: Equipment protection by powder filling q Part 6: Equipment protection by oil-immersion o Part 6: Equipment protection by oil-immersion o Part 7: Equipment protection by increased safety e Part 7: Equipment protection by increased safety e Part 11: Equipment protection by intrinsic safety i Part 11: Equipment protection by intrinsic safety i Part 15: Equipment protection by type of protection n Part 15: Equipment protection by type of protection n Part 18: Equipment protection by encapsulation m Part 18: Equipment protection by encapsulation m

5 iii 3 Reference to International Standard IEC Part 25: Intrinsically safe electrical systems Part 26: Equipment with equipment protection level (EPL) Ga Part 28: Protection of equipment and transmission systems using optical radiation Part 30-1: Electrical resistance trace heating General and testing requirements Part 31: Equipment dust ignition protection by enclosure t Stationary lead-acid batteries General requirements and test methods Part 2: Valve regulated types Electrical apparatus for use in presence of combustible dust Part 4: Type of protection pd Caplights for use in mines susceptible to firedamp Part 1: General requirements Construction and testing in relation to the risk of explosion ISO 4014 Hexagon head bolts Product grades A and B 4017 Hexagon head screws Product grades A and B ISO 4026 Hexagon socket set screws with flat point 4027 Hexagon socket set screws with cone point 4028 Hexagon socket set screws with dog point 4029 Hexagon socket set screws with cup point Australian/New Zealand Standard AS/NZS Part 25: Intrinsically safe electrical systems Part 26: Equipment with equipment protection level (EPL) Ga Part 28: Protection of equipment and transmission systems using optical radiation Part 30.1: Electrical resistance trace heating General and testing requirements Part 31: Equipment dust ignition protection by enclosure t Stationary batteries Lead-acid Part 2: Valve regulated types Electrical apparatus for use in presence of combustible dust Part 4: Type of protection pd Caplights for use in mines susceptible to firedamp Part 1: General requirements Construction and testing in relation to the risk of explosion AS ISO metric hexagon bolts and screws Product grades A and B Part 1: Bolts ISO metric hexagon bolts and screws Product grades A and B Part 2: Screws AS/NZS 1421 ISO metric hexagon socket set screws 1421 ISO metric hexagon socket set screws 1421 ISO metric hexagon socket set screws 1421 ISO metric hexagon socket set screws It should be noted that many other parts of IEC and IEC are now published as identically numbered parts of AS/NZS and AS/NZS respectively. The latter should be referenced when necessary. The terms normative and informative are used to define the application of an annex to which they apply. A normative annex is an integral part of a standard, whereas an informative annex is only for information and guidance.

6 iv 4 CONTENTS IEC:2011 CONTENTS Page FOREWORD Scope Normative references Terms and definitions Equipment grouping Group I Group II Group III Equipment for a particular explosive atmosphere Temperatures Environmental influences Ambient temperature External source of heating or cooling Service temperature Maximum surface temperature Determination of maximum surface temperature Limitation of maximum surface temperature Small component temperature for Group I or Group II electrical equipment Requirements for all electrical equipment General Mechanical strength of equipment Opening times Circulating currents in enclosures (e.g. of large electrical machines) Gasket retention Electromagnetic and ultrasonic energy radiating equipment Radio frequency sources Lasers or other continuous wave sources Ultrasonic sources Non-metallic enclosures and non-metallic parts of enclosures General Applicability Specification of materials Thermal endurance Tests for thermal endurance Material selection Alternative qualification of elastomeric sealing O-rings Resistance to light Electrostatic charges on external non-metallic materials Applicability Avoidance of a build-up of electrostatic charge on Group I or Group II electrical equipment Avoidance of a build-up of electrostatic charge on equipment for Group III Accessible metal parts Metallic enclosures and metallic parts of enclosures... 38

7 v IEC: Page 8.1 Material composition Group I Group II Group III Fasteners General Special fasteners Holes for special fasteners Thread engagement Tolerance and clearance Hexagon socket set screws Interlocking devices Bushings Materials used for cementing Ex Components General Mounting Internal mounting External mounting Ex Component certificate Connection facilities and termination compartments General Termination compartment Type of protection Creepage and clearance Connection facilities for earthing or bonding conductors Equipment requiring earthing Internal External Equipment not requiring earthing Size of conductor connection Protection against corrosion Secureness of electrical connections Entries into enclosures General Identification of entries Cable glands Blanking elements Thread adapters Temperature at branching point and entry point Electrostatic charges of cable sheaths Supplementary requirements for rotating machines Ventilation Ventilation openings Materials for external fans Cooling fans of rotating machines Auxiliary motor cooling fans Ventilating fans... 47

8 vi IEC:2011 Page 17.2 Bearings Supplementary requirements for switchgear Flammable dielectric Disconnectors Group I Provisions for locking Doors and covers Supplementary requirements for fuses Supplementary requirements for plugs, socket outlets and connectors General Explosive gas atmospheres Explosive dust atmospheres Energized plugs Supplementary requirements for luminaires General Covers for luminaires of EPL Mb, EPL Gb, or EPL Db Covers for luminaires of EPL Gc or EPL Dc Sodium lamps Supplementary requirements for caplights and handlights Group I caplights Group II and Group III caplights and handlights Equipment incorporating cells and batteries General Batteries Cell types Cells in a battery Ratings of batteries Interchangeability Charging of primary batteries Leakage Connections Orientation Replacement of cells or batteries Replaceable battery pack Documentation Compliance of prototype or sample with documents Type tests General Test configuration Tests in explosive test mixtures Tests of enclosures Order of tests Resistance to impact Drop test Acceptance criteria Degree of protection (IP) by enclosures Thermal tests Temperature measurement Thermal shock test... 61

9 vii IEC: Page Small component ignition test (Group I and Group II) Torque test for bushings Test procedure Acceptance criteria Non-metallic enclosures or non-metallic parts of enclosures General Test temperatures Thermal endurance to heat Thermal endurance to cold Resistance to light Test procedure Acceptance criteria Resistance to chemical agents for Group I electrical equipment Earth continuity Surface resistance test of parts of enclosures of non-metallic materials Measurement of capacitance General Test procedure Verification of ratings of ventilating fans Alternative qualification of elastomeric sealing O-rings Routine tests Manufacturer's responsibility Conformity with the documentation Certificate Responsibility for marking Marking Applicability Location General Ex marking for explosive gas atmospheres Ex marking for explosive dust atmospheres Combined types (or levels) of protection Multiple types of protection Ga equipment using two independent Gb types (or levels) of protection Ex Components Small equipment and small Ex Components Extremely small equipment and extremely small Ex Components Warning markings Alternate marking of equipment protection levels (EPLs) Alternate marking of type of protection for explosive gas atmospheres Alternate marking of type of protection for explosive dust atmospheres Cells and batteries Converter-fed electrical machines Examples of marking Instructions General Cells and batteries... 81

10 viii 8 Page IEC: Electrical machines Ventilating fans Annex A (normative) Supplementary requirements for cable glands Annex B (normative) Requirements for Ex Components Annex C (informative) Example of rig for resistance to impact test Annex D (informative) Motors supplied by converters Annex E (informative) Temperature rise testing of electric machines Annex F (informative) Guideline flowchart for tests of non-metallic enclosures or nonmetallic parts of enclosures (26.4) Bibliography Figure 1 Tolerances and clearance for threaded fasteners Figure 2 Contact surface under head of fastener with a reduced shank Figure 3 Illustration of entry points and branching points Figure 4 Assembly of test sample for earth-continuity test Figure 5 Test piece with painted electrodes Figure 6 Compression set of an O-ring Figure A.1 Illustration of the terms used for cable glands Figure A.2 Rounded edge of the point of entry of the flexible cable Figure C.1 Example of rig for resistance to impact test Figure F.1 Non-metallic enclosures or non-metallic parts of enclosures Table 1 Ambient temperatures in service and additional marking Table 2 Classification of maximum surface temperatures for Group II electrical equipment Table 3a Assessment of temperature classification according to component size at 40 ºC ambient temperature Table 3b Assessment of temperature classification Component surface area 20 mm 2 Variation in maximum power dissipation with ambient temperature Table 4 Radio frequency power thresholds Table 5 Radio-frequency energy thresholds Table 6 Limitation of surface areas Table 7 Maximum diameter or width Table 8 Limitation of thickness of non-metallic layer Table 9 Maximum capacitance of unearthed metal parts Table 10 Minimum cross-sectional area of PE conductors Table 11 Primary cells Table 12 Secondary cells Table 13 Tests for resistance to impact Table 14 Torque to be applied to the stem of bushing used for connection facilities Table 15 Thermal endurance test Table 16 Text of warning markings Table B.1 Clauses with which Ex Components shall comply... 90

11 9 NOTES

12 AUSTRALIAN/NEW ZEALAND STANDARD Explosive atmospheres Part 0: Equipment General requirements Part 0: Equipment General requirements 1 Scope IEC:2011 EXPLOSIVE ATMOSPHERES This part of IEC specifies the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that electrical equipment can be operated are: temperature 20 C to +60 C; pressure 80 kpa (0,8 bar) to 110 kpa (1,1 bar); and air with normal oxygen content, typically 21 % v/v. This standard and other standards supplementing this standard specify additional test requirements for equipment operating outside the standard temperature range, but further additional consideration and additional testing may be required for equipment operating outside the standard atmospheric pressure range and standard oxygen content, particularly with respect to types of protection that depend on quenching of a flame such as flameproof enclosure d (IEC ) or limitation of energy, intrinsic safety i (IEC ). 10 NOTE 1 Although the standard atmospheric conditions above give a temperature range for the atmosphere of - 20 C to +60 C, the normal ambient temperature range for the equipment is 20 C to +40 C, unless otherwise specified and marked. See It is considered that 20 C to +40 C is appropriate for most equipment and that to manufacture all equipment to be suitable for a standard atmosphere upper ambient temperature of +60 C would place unnecessary design constraints. NOTE 2 Requirements given in this standard result from an ignition hazard assessment made on electrical equipment. The ignition sources taken into account are those found associated with this type of equipment, such as hot surfaces, mechanically generated sparks, mechanical impacts resulting in thermite reactions, electrical arcing and static electric discharge in normal industrial environments. NOTE 3 It is acknowledged that, with developments in technology, it may be possible to achieve the objectives of the IEC series of standards in respect of explosion prevention by methods that are not yet fully defined. Where a manufacturer wishes to take advantage of such developments, this International Standard, as well as other standards in the IEC series, may be applied in part. It is intended that the manufacturer prepare documentation that clearly defines how the IEC series of standards has been applied, together with a full explanation of the additional techniques employed. The designation Ex s has been reserved to indicate special protection. A standard for special protection s, IEC , is in preparation. NOTE 4 Where an explosive gas atmosphere and a combustible dust atmosphere are, or may be, present at the same time, the simultaneous presence of both should be considered and may require additional protective measures. This standard does not specify requirements for safety, other than those directly related to the explosion risk. Ignition sources like adiabatic compression, shock waves, exothermic chemical reaction, self ignition of dust, naked flames and hot gases/liquids, are not addressed by this standard. NOTE 5 Such equipment should be subjected to a hazard analysis that identifies and lists all of the potential sources of ignition by the electrical equipment and the measures to be applied to prevent them becoming effective. This standard is supplemented or modified by the following standards concerning specific types of protection: IEC : Gas Flameproof enclosures "d"; IEC : Gas Pressurized enclosures "p"; COPYRIGHT

13 IEC: IEC : Gas Powder filling "q"; IEC : Gas Oil immersion "o"; IEC : Gas Increased safety "e"; IEC : Gas Intrinsic safety "i"; IEC : Gas Type of protection n ; IEC : Gas and dust Encapsulation "m"; IEC : Dust Protection by enclosure t IEC : Dust Pressurization pd. NOTE 6 Additional information on types of protection for non-electrical equipment can be found in ISO/IEC (to be published). This standard is supplemented or modified by the following equipment standards: IEC : Explosive atmospheres Part 13: Equipment protection by pressurized room p IEC : Explosive atmospheres Part 25: Intrinsically safe electrical systems IEC : Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga IEC : Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation IEC : Caplights for use in mines susceptible to firedamp Part 1: General requirements Construction and testing in relation to the risk of explosion IEC : Explosive atmospheres Part 30-1: Electrical resistance trace heating General and testing requirements. This standard with the additional standards mentioned above, are not applicable to the construction of electromedical apparatus, shot-firing exploders, test devices for exploders, and shot-firing circuits. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC , Rotating electrical machines Part 1: Rating and performance 11 IEC , Rotating electrical machines Part 5: Classification of degrees of protection provided by the enclosures of rotating electrical machines (IP Code) IEC , International Electrotechnical Vocabulary (IEV) Chapter 426: Electrical apparatus for explosive atmospheres COPYRIGHT

14 AS/NZS :2012 Explosive atmospheres - Part 0: Equipment - General requirements This is a free sample only. Purchase the full publication here: Or contact Standards New Zealand using one of the following methods. Freephone: (New Zealand) Phone: enquiries@standards.govt.nz

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014

More information

AS/NZS :2008

AS/NZS :2008 AS/NZS 60079.29.2:2008 Australian/New Zealand Standard Explosive atmospheres Part 29.2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.29.2:2008

More information

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard AS/NZS 61386.1:2015 Australian/New Zealand Standard Conduit systems for cable management Part 1: General requirements Superseding AS/NZS 2053.1:2001 AS/NZS 61386.1:2015 AS/NZS 61386.1:2015 This joint Australian/New

More information

AS/NZS :2014

AS/NZS :2014 Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements

More information

AS/NZS :2015

AS/NZS :2015 AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998

More information

AS/NZS IEC :2015

AS/NZS IEC :2015 AS/NZS IEC 60947.5.6:2015 (IEC 60947-5-6, Ed. 1.0:1999, IDT) Australian/New Zealand Standard Low-voltage switchgear and Part 5.6: Control circuit devices and switching elements DC interface for proximity

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 61779.6:2000 (Incorporating Amendment No. 1) AS/NZS 61779.6:2000 Australian/New Zealand Standard Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,

More information

AS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004

AS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 (Incorporating Amendment No. 1) Australian/New Zealand Standard Code of practice for handling combustible dusts Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 AS/NZS 4745:2012 This Joint

More information

AS/NZS :2014

AS/NZS :2014 (ISO 13857:2008, IDT) Australian/New Zealand Standard Safety of machinery Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs AS/NZS 4024.1801:2014 This joint Australian/New

More information

AS/NZS 3133:2008 AS/NZS

AS/NZS 3133:2008 AS/NZS Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared

More information

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems Australian/New Zealand Standard Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Superseding AS/NZS 2053.2:2001, AS/NZS 2053.6:2001 and AS/NZS 2053.7:2002 This

More information

AS/NZS :2016

AS/NZS :2016 Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating

More information

AS/NZS IEC :2013

AS/NZS IEC :2013 AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO 21987:2011 ISO 21987:2009 AS/NZS ISO 21987:2011 Australian/New Zealand Standard Ophthalmic optics Mounted spectacle AS/NZS ISO 21987:2011 This Joint Australian/New Zealand Standard was prepared

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 60079.17:2017 AS/NZS 60079.17:2017 Australian/New Zealand Standard Explosive atmospheres Part 17: Electrical installations inspection and maintenance (IEC 60079-17:2013 (ED.5.0) MOD) AS/NZS 60079.17:2017

More information

AS/NZS IEC 62560:2014

AS/NZS IEC 62560:2014 AS/NZS IEC 62560:2014 (IEC 62560-2011 Ed 1.0, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications AS/NZS IEC 62560:2014 AS/NZS

More information

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:

More information

AS/NZS :2016. Explosive atmospheres AS/NZS :2016. Part 7: Equipment protection by increased safety e. Australian/New Zealand Standard

AS/NZS :2016. Explosive atmospheres AS/NZS :2016. Part 7: Equipment protection by increased safety e. Australian/New Zealand Standard AS/NZS 60079.7:2016 (IEC 60079-7, Ed 5.0:2015, IDT) Australian/New Zealand Standard Explosive atmospheres Part 7: Equipment protection by increased safety e Superseding AS/NZS 60079.7:2006 AS/NZS 60079.7:2016

More information

AS/NZS :2015. Explosive atmospheres AS/NZS :2015. Part 1: Equipment protection by flameproof enclosures d

AS/NZS :2015. Explosive atmospheres AS/NZS :2015. Part 1: Equipment protection by flameproof enclosures d AS/NZS 60079.1:2015 (IEC 60079-1 Ed.7.0:2015, IDT) Australian/New Zealand Standard Explosive atmospheres Part 1: Equipment protection by flameproof enclosures d Superseding AS/NZS 60079.1:2007 AS/NZS 60079.1:2015

More information

AS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard

AS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard AS/NZS 3120:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Approval and test specification Cord extension sockets AS/NZS 3120:2011 AS/NZS 3120:2011 This Joint Australian/New Zealand

More information

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017 AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014

More information

AS/NZS :1995. Emergency escape lighting and exit signs for buildings AS/NZS :1995. Part 2: Inspection and maintenance

AS/NZS :1995. Emergency escape lighting and exit signs for buildings AS/NZS :1995. Part 2: Inspection and maintenance Australia/New Zealand Standard AS/NZS 2293.2:1995 Incorporating Amendment No. 1, 2, and 3 Emergency escape lighting and exit signs for buildings Superseding in part NZS 6742:1971 and AS 2293.2 1987 AS/NZS

More information

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online. AS IEC 60942 2004 IEC 60942:2003 AS IEC 60942 Australian Standard Electroacoustics Sound calibrators This Australian Standard was prepared by Committee AV-002, Acoustics Instrumentation and Measurement

More information

AS/NZS TR IEC :2012

AS/NZS TR IEC :2012 AS/NZS TR IEC 61000.2.6:2012 IEC/TR 61000-2-6, Ed.1.0 (1995) Technical Report Electromagnetic compatibility (EMC) Part 2.6: Environment Assessment of the emission levels in the power supply of industrial

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016 Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification

More information

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard Australian/New Zealand Standard AS/NZS 4821:2014 (EN 15090:2012, MOD) Protective footwear for firefighters Requirements and test methods Superseding AS/NZS 4821:2006 AS/NZS 4821:2014 This standard, is

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60079-0 Edition 3.1 2000-06 Edition 3:1998 consolidated with amendment 1:2000 Electrical apparatus for explosive gas atmospheres Part 0: General requirements IEC 2000 Copyright

More information

AS/NZS 3190:2011 AS/NZS

AS/NZS 3190:2011 AS/NZS AS/NZS 3190:2016 Australian/New Zealand Standard Approval and test specification Residual current devices (currentoperated earth-leakage devices) Superseding AS/NZS 3190:2011 AS/NZS 3190:2016 AS/NZS 3190:2016

More information

AS/NZS :2014

AS/NZS :2014 AS/NZS 4024.1601:2014 (EN 953:1997 inc A1:2009, IDT) Australian/New Zealand Standard Safety of machinery Part 1601: Design of controls, interlocks and guarding Guards General requirements for the design

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1338.1:2012 AS/NZS 1338.1:2012 Australian/New Zealand Standard Filters for eye protectors Part 1: Filters for protection against radiation generated in welding and allied operations AS/NZS 1338.1:2012

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3666.2:2011 AS/NZS 3666.2:2011 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 2: Operation and maintenance AS/NZS 3666.2:2011 This Joint Australian/New

More information

AS/NZS 3957:2006 AS/NZS

AS/NZS 3957:2006 AS/NZS AS/NZS 3957:2014 Australian/New Zealand Standard Light-transmitting screens and curtains for welding operations Superseding AS/NZS 3957:2006 AS/NZS 3957:2014 AS/NZS 3957:2014 This joint Australian/New

More information

AS/NZS :1998 AS/NZS ISO

AS/NZS :1998 AS/NZS ISO (ISO 817:2014, IDT) Australian/New Zealand Standard Refrigerants Designation and safety classification Superseding AS/NZS 1677.1:1998 AS/NZS ISO 817:2016 This joint Australian/New Zealand standard was

More information

AS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard

AS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard AS/NZS 3111:2009 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009 AS/NZS 3111:2009 This joint Australian/New

More information

AS/NZS 4012:1999 AS/NZS

AS/NZS 4012:1999 AS/NZS Australian/New Zealand Standard AS/NZS 4012:2014 Incorporating Amendment No. 1 Domestic solid fuel burning appliances Method for determination of power output and efficiency Superseding AS/NZS 4012:1999

More information

AS/NZS IEC :2016

AS/NZS IEC :2016 AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2201.1:2007 AS/NZS 2201.1:2007 Australian/New Zealand Standard Intruder alarm systems Part 1: Client s premises Design, installation, commissioning and maintenance AS/NZS 2201.1:2007 This Joint

More information

AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark

AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark AS/NZS 4417.1:2012 Appending New Zealand-only Amendment A Australian/New Zealand Standard Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark Superseding AS/NZS 4417.1:2009

More information

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No. AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2293.2:1995 (Incorporating Amendment Nos 1 and 2) AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency escape lighting and exit signs for buildings AS/NZS 2293.2:1995 This Joint Australian/New

More information

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1680.5:2012 AS/NZS 1680.5:2012 Australian/New Zealand Standard Interior and workplace lighting Part 5: Outdoor workplace lighting AS/NZS 1680.5:2012 This Joint Australian/New Zealand Standard was

More information

AS/NZS 4234:2008 AS/NZS

AS/NZS 4234:2008 AS/NZS AS/NZS 4234:2008 Incorporating Amendment No. 1, 2, and 3 Australian/New Zealand Standard Heated water systems Calculation of energy consumption Superseding AS/NZS 4234:2008 AS/NZS 4234:2008 AS/NZS 4234:2008

More information

Household and similar electrical appliances Safety

Household and similar electrical appliances Safety AS/NZS 60335.2.69:2012 (IEC 60335-2-69 Ed 4, MOD) Australian/New Zealand Standard Household and similar electrical appliances Safety Part 2.69: Particular requirements for wet and dry vacuum cleaners,

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1850:2009 AS/NZS 1850:2009 Australian/New Zealand Standard Portable fire extinguishers Classification, rating and performance testing AS/NZS 1850:2009 This Joint Australian/New Zealand Standard

More information

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508 AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4692.1:2005 (Incorporating Amendment Nos 1 and 2) Reconfirmed 2016 AS/NZS 4692.1:2005 A2 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1841.1:2007 AS/NZS 1841.1:2007 Australian/New Zealand Standard Portable fire extinguishers Part 1: General requirements AS/NZS 1841.1:2007 This Joint Australian/New Zealand Standard was prepared

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3200.2.4:2006 IEC 60601-2-4:2005 AS/NZS 3200.2.4:2006 Australian/New Zealand Standard Medical electrical equipment Part 2.4: Particular requirements for safety Cardiac defibrillators AS/NZS 3200.2.4:2006

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared

More information

AS/NZS :2009

AS/NZS :2009 Australian/New Zealand Standard AS/NZS 61558.2.6:2009 Incorporating Amendment No. 1 (IEC 61558-2-6 Ed 2, MOD) Safety of transformers, reactors, power supply units and similar products for supply voltages

More information

AS/NZS :2014

AS/NZS :2014 AS/NZS 4755.3.3:2014 Australian/New Zealand Standard Demand response capabilities and supporting technologies for electrical products Part 3.3: Interaction of demand response enabling devices and electrical

More information

AS/NZS 2: 1067:2003 AS/NZS

AS/NZS 2: 1067:2003 AS/NZS Australian/New Zealand Standard AS/NZS 1067.2:2016 (ISO 12311:2013, IDT) Eye and face protection Sunglasses and fashion spectacles Part 2: Test methods Superseding in part AS/NZS 1067:2003 AS/NZS 1067.2:2016

More information

AS/NZS ISO/IEC :2012

AS/NZS ISO/IEC :2012 AS/NZS ISO/IEC 14763.3:2012 (ISO/IEC 14763-3:2011, MOD) Australian/New Zealand Standard Telecommunications installations Implementation and operation of customer premises cabling Part 3: Testing of optical

More information

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529 AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18925 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3019:2007 AS/NZS 3019:2007 Australian/New Zealand Standard Electrical installations Periodic verification AS/NZS 3019:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2033:2008 AS/NZS 2033:2008 Australian/New Zealand Standard Installation of polyethylene pipe systems AS/NZS 2033:2008 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4645.2:2008 AS/NZS 4645.2:2008 Australian/New Zealand Standard Gas distribution networks Part 2: Steel pipe systems AS/NZS 4645.2:2008 This Joint Australian/New Zealand Standard was prepared by

More information

AS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009

AS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009 AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy

More information

Australian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293.

Australian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293. AS 2293.1 2005 AS 2293.1 2005 Australian Standard Emergency escape lighting and exit signs for buildings Part 1: System design, installation and operation This Australian Standard was prepared by Committee

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2243.5 Australian/New Zealand Standard Safety in laboratories Part 5: Non-ionizing radiations Electromagnetic, sound and ultrasound This Joint Australian/New Zealand Standard was prepared by Joint

More information

Substations and high voltage installations exceeding 1 kv a.c.

Substations and high voltage installations exceeding 1 kv a.c. AS 2067:2016 AS 2067:2016 Substations and high voltage installations exceeding 1 kv a.c. This Australian Standard was prepared by Committee EL-043, High Voltage Installations. It was approved on behalf

More information

AS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements

AS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements

More information

Australian Standard. Fire detection and alarm systems. Part 6: Carbon monoxide fire detectors using electro-chemical cells

Australian Standard. Fire detection and alarm systems. Part 6: Carbon monoxide fire detectors using electro-chemical cells AS 7240.6 2006 ISO 7240-6:2004 AS 7240.6 2006 Australian Standard Fire detection and alarm systems Part 6: Carbon monoxide fire detectors using electro-chemical cells This Australian Standard was prepared

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18926 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

AS/NZS IEC :2016

AS/NZS IEC :2016 Australian/New Zealand Standard AS/NZS IEC 60601.2.25:2016 (IEC 60601-2-25, Ed. 2.0:2011, IDT) Medical electrical equipment Part 2.25: Particular requirements for the basic safety and essential performance

More information

Australian/New Zealand Standard TM

Australian/New Zealand Standard TM 1 AS/NZS 1841.8:2007 AS/NZS 1841.8:2007 Australian/New Zealand Standard TM Portable fire extinguishers Part 8: Specific requirements for non-rechargeable type extinguishers 1 SCOPE This Standard specifies

More information

AS/NZS IEC :2014

AS/NZS IEC :2014 AS/NZS IEC 60825.1:2014 (IEC 60825-1, Ed. 3.0:2014, IDT) Australian/New Zealand Standard Safety of laser products Part 1: Equipment classification and requirements Superseding AS/NZS IEC 60825.1:2011 AS/NZS

More information

AS/NZS TR IEC :2012

AS/NZS TR IEC :2012 AS/NZS TR IEC 61000.3.7:2012 IEC TR 61000-3-7, Ed.2.0 (2008) Technical Report Electromagnetic compatibility (EMC) Part 3.7: Limits Assessment of emission limits for the connection of fluctuating installations

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3500.4:2003 (Incorporating Amendment Nos 1 and 2) AS/NZS 3500.4:2003 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services AS/NZS 3500.4:2003 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1337.1:2010 (Incorporating Amendment No. 1) AS/NZS 1337.1:2010 Australian/New Zealand Standard Personal eye protection Part 1: Eye and face protectors for occupational applications AS/NZS 1337.1:2010

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4692.1:2005 AS/NZS 4692.1:2005 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general requirements AS/NZS 4692.1:2005 This Joint Australian/New

More information

AS/NZS :2017. Explosive atmospheres AS/NZS :2017. Part 14: Design selection, erection and initial inspection

AS/NZS :2017. Explosive atmospheres AS/NZS :2017. Part 14: Design selection, erection and initial inspection AS/NZS 60079.14:2017 (IEC 60079-14, Ed. 5.0:2013, MOD) Australian/New Zealand Standard Explosive atmospheres Part 14: Design selection, erection and initial inspection Superseding AS/NZS 60079.14:2009

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2918:2001 AS/NZS 2918 Australian/New Zealand Standard Domestic solid fuel burning appliances Installation Building Code of Australia Primary referenced Standard AS/NZS 2918:2001 This Joint Australian/New

More information

Australian Standard. Smoke alarms. AS (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786

Australian Standard. Smoke alarms. AS (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786 AS 3786 1993 (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786 Australian Standard Smoke alarms This Australian Standard was prepared by Committee FP-002, Automatic Fire Detection and Alarm Systems.

More information

Medical electrical equipment

Medical electrical equipment AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements

More information

Australian Standard. Functional safety Safety instrumented systems for the process industry sector

Australian Standard. Functional safety Safety instrumented systems for the process industry sector AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1

More information

AS AS Australian Standard. Installation of fire hose reels. This is a free 6 page sample. Access the full version online.

AS AS Australian Standard. Installation of fire hose reels. This is a free 6 page sample. Access the full version online. AS 2441 2005 AS 2441 2005 Australian Standard Installation of fire hose reels This Australian Standard was prepared by Committee FP-007, Fire Hose Reels. It was approved on behalf of the Council of Standards

More information

Australian Standard. Components for the protection of openings in fire-resistant walls. Part 1: Fire-resistant doorsets AS AS 1905.

Australian Standard. Components for the protection of openings in fire-resistant walls. Part 1: Fire-resistant doorsets AS AS 1905. AS 1905.1 2005 AS 1905.1 2005 Australian Standard Components for the protection of openings in fire-resistant walls Part 1: Fire-resistant doorsets This Australian Standard was prepared by Committee FP-019,

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency evacuation lighting for buildings AS/NZS 2293.2:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee LG/7,

More information

Interim Australian Standard

Interim Australian Standard AS 1735.10(Int) 1998 (Incorporating Amendment Nos 1 and 2) Expries 5 August 2003) AS 1735.10(Int) Interim Australian Standard Lifts, escalators and moving walks Part 10: Tests This Australian Standard

More information

AS/NZS :2015. Plumbing and drainage AS/NZS :2015. Part 4: Heated water services. Australian/New Zealand Standard

AS/NZS :2015. Plumbing and drainage AS/NZS :2015. Part 4: Heated water services. Australian/New Zealand Standard AS/NZS 3500.4:2015 Incorporating Amendment No. 1 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services Superseding AS/NZS 3500.4:2003 AS/NZS 3500.4:2015 AS/NZS 3500.4:2015

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4586:2004 (Incorporating Amendment No. 1) AS/NZS 4586:2004 Australian/New Zealand Standard Slip resistance classification of new pedestrian surface materials AS/NZS 4586:2004 This Joint Australian/New

More information

AS/NZS :2009 Explosive atmospheres - Part 14: Electrical installations design, selection and erection

AS/NZS :2009 Explosive atmospheres - Part 14: Electrical installations design, selection and erection Skip to main content Skip to primary navigation Home Home About this portal Latest updates Menu Print Save Email Resource detail Citations AS/NZS 60079.14:2009 Explosive atmospheres - Part 14: Electrical

More information

Australian Standard. Fire detection, warning, control and intercom systems Control and indicating equipment. Part 1: Fire

Australian Standard. Fire detection, warning, control and intercom systems Control and indicating equipment. Part 1: Fire AS 4428.1 1998 (Incorporating Amendment No. 1) AS 4428.1 Australian Standard Fire detection, warning, control and intercom systems Control and Part 1: Fire This Australian Standard was prepared by Committee

More information

Australian Standard. Fire hydrant installations. Part 1: System design, installation and commissioning AS

Australian Standard. Fire hydrant installations. Part 1: System design, installation and commissioning AS AS 2419.1 1994 (Incorporating Amendment Nos 1 and 2) AS 2419.1 1994 Australian Standard Fire hydrant installations Part 1: System design, installation and commissioning This Australian Standard was prepared

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60

More information

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning. Part 1: Fire AS 1670.

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning. Part 1: Fire AS 1670. AS 1670.1 2004 (Incorporating Amendment No. 1) AS 1670.1 2004 Australian Standard Fire detection, warning, control and intercom systems System design, installation and commissioning Part 1: Fire This Australian

More information

AS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online.

AS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online. AS 3743 2003 AS 3743 Australian Standard Potting mixes This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the Council of Standards Australia

More information

Australian Standard. Gaseous fire extinguishing systems AS (Incorporating Amendment No. 1) AS

Australian Standard. Gaseous fire extinguishing systems AS (Incorporating Amendment No. 1) AS AS 4214 2002 (Incorporating Amendment No. 1) AS 4214 2002 Australian Standard Gaseous fire extinguishing systems This Australian Standard was prepared by Committee FP-011, Gaseous Fire Protection. It was

More information

Australian Standard. Fixed fire protection installations Pumpset systems AS AS 2941

Australian Standard. Fixed fire protection installations Pumpset systems AS AS 2941 AS 2941 2002 AS 2941 Australian Standard Fixed fire protection installations Pumpset systems This Australian Standard was prepared by Committee FP-008, Fire Service Pumps. It was approved on behalf of

More information

Australian Standard. Security screen doors and security window grilles AS AS 5039

Australian Standard. Security screen doors and security window grilles AS AS 5039 AS 5039 2003 AS 5039 Australian Standard Security screen doors and security window grilles This Australian Standard was prepared by Committee CS-023, Security Screen Doors and Security Window Grilles.

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3809:1998 Australian/New Zealand Standard Safes and strongrooms AS/NZS 3809:1998 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee MS/58, Prefabricated Safes and

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61241-1-2 Second edition 1999-06 Electrical apparatus for use in the presence of combustible dust Part 1-2: Electrical apparatus protected by enclosures and surface temperature

More information

AS/NZS :2016

AS/NZS :2016 AS/NZS 60335.2.103:2016 (IEC 60335-2-103 Ed 3.1, IDT) Incorporating Amendment No. 1 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 2.103: Particular requirements

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:

More information

Medical electrical equipment

Medical electrical equipment AS IEC 60601.1.2:2017 IEC 60601-1-2:2014 AS IEC 60601.1.2:2017 Medical electrical equipment Part 1.2: General requirements for basic safety and essential performance Collateral Standard: Electromagnetic

More information