Ensure you make the right decisions selecting and positioning your extinguishers. December 2012

Transcription

1 Read online: shop.bsigroup.com/usonline1212 December 2012 Ensure you make the right decisions selecting and positioning your extinguishers BS : Fire extinguishing installations and equipment on premises Part 8: Selection and positioning of portable fire extinguishers Code of practice. Contents 4 Quick Reference Guide 10 New and revised British Standards 10 BS EN publications 17 British Standard implementations 20 Published Documents 21 Publicly Available Specifications 21 Specialist books from BSI 21 Corrigenda to British Standards 22 Updated British Standards 23 British Standards proposed for confirmation and confirmed 31 British Standards withdrawn 33 British Standards under review 38 New work started 44 Draft British Standards 53 Documents not issued as DPCs 53 CEN publications 55 CENELEC publications 56 IEC publications 60 ISO publications *See back cover for more information

2 Welcome to Update Standards In these pages you ll find details of new, revised, draft and withdrawn standards and publications from the last month. Update Standards is designed to help you keep track of the standards you use, and discover new standards that could help your organization. Get free expert help from our Knowledge Centre The Knowledge Centre is a team of information professionals, available 9am-5pm Mon-Fri to help with your standards questions. They can perform advanced subject searches, and quickly identify international equivalents from over 200 standards organizations across 23 countries. They can also send you the scope and contents of standards before your buy, so you can be sure of what you re receiving. Access to the Knowledge Centre is a benefit of being a member of BSI. Contact the Knowledge Centre Phone Fax knowledgecentre@bsigroup.com How to order The standards, publications and conferences featured in this magazine are available online or from our customer services team. Customer services is open from 9am to 5pm, Monday to Friday. Phone Website shop.bsigroup.com/us1212 orders@bsigroup.com to place an order. info@bsigroup.com to make an enquiry Fax Post BSI Customer Services 389 Chiswick High Road London W4 4AL bsigroup.com/customerservicesus1212 BSI Training Our tutors are skilled in transferring knowledge contained within each standard to help you embed excellence within your organization. With over 65,000 clients in 150 countries world-wide, you can trust BSI to help you perform better, reduce risk and grow sustainably. Visit us and download our training catalogue today: bsigroup.co.uk/training

3 BSI Events in 2012/2013 BSI s BIM Conference 6 December 2012, Manchester Join us at the BSI s Building Information Modelling Conference on 6 December 2012 in Manchester and find out how standards could help your organization in the adoption of BIM. This free to attend event will provide you with the opportunity to hear from industry experts about the increasingly important role of BIM in all areas of the construction and civil engineering industry. You will find out more about BSI s initiatives and B/555 Roadmap which documents and describes the activities of the BSI/555 committee in support of delivering clear guidance to the UK industry dedicated to providing and operating built assets. Don t miss the practical workshop on implementing the BS 8541 Library objects for architecture, engineering and construction series. These new standards, and the example templates published for the UK Government BIM implementation strategy are of interest to designers, constructors and product manufacturers. Learn how these standards help the industry share structured data. Read more and book your place bsigroup.com/conferencesus1212 Intersec January 2013, Dubai International Convention and Exhibition Centre Intersec is far more than a successful meeting platform. This is where new projects and partnerships are initiated, where visionary objectives are conceived and implemented. Intersec is of unique value to all the target groups in the Security & Safety industry. Interest in new technical solutions is growing to a greater extent than previously experienced, releasing tremendous sales and turnover potential. Visit Intersec to: - Find new products that are essential to your business - Develop relationships with key industry players - Identify regional or domestic business opportunities - Compare prices, specifications and product variants - Get up-to-date information about the industry Read more intersecexpo.com No longer require a paper copy of Update Standards? Please help us reduce waste by letting us know. Phone membership@bsigroup.com The UK Concrete Show February 2013, NEC Birmingham The UK Concrete Show 2013 will once more bring the industry together, under one roof, to see and hear about all that's new in concrete. During the show BSI will be showcasing their new practical, easy-to-use, online tool Eurocodes PLUS. Concrete has never faced more challenges than it does today and yet, remarkably, the pace and range of technical development is greater than at any time in history and this is ensuring that the range of uses and applications for concrete are, rather than decreasing, actually increasing. Ready mix and pre-cast concrete producers, specifiers, specialist contractors, engineers, architects if you manufacture, sell, specify or work with concrete in any capacity then this is your show. The seminar program will encompass not only technical matters but also genuine industry issues of the day that affect us all and with the opportunity to network with your peers as well as keeping up to date with latest developments in the industry, this is an event that is not to be missed. For more details about The UK Concrete Show concreteshow.co.uk For more details about Eurocodes PLUS bsigroup.com/eurocodesplusus1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2012

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 32 BS BS BS DD CEN/TS , 32 BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN , 32 BS EN BS EN ISO BS ISO , 32 BS ISO BS ISO PD CEN/TR PD CEN/TR PD CEN/TS , 32 PD Consumer products and services BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 31 BS BS BS BS BS BS BS BS BS BS DD CEN ISO/TS BS EN BS EN BS EN ISO BS EN ISO BS EN , 32 BS EN ISO , 32 BS EN ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 31 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS DD ISO/TS , 32 DD ISO/TS DD ISO/TS PD CEN/TR PD ISO/TS Electrotechnical BS BS BS BS BS BS BS BS BS BS BS , 31 BS , 31 BS BS , 32 BS BS BS BS , 31 BS BS BS BS BS , 32 BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN , 32 BS EN , 31 BS EN , 31 BS EN BS EN BS EN BS EN BS EN , 32 BS EN , 32 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 32 BS EN BS EN BS EN BS EN BS ISO , 31 BS IEC DD IEC/TS , 32 PD CEN ISO/TS PD IEC/TR Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 2059/ BS 2059/ BS 2059/ BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS Update Standards December 2012 Prices may be subject to change.

5 British Standards Quick Reference Guide continued... BS BS , 31 BS BS , 18, 32 BS DD CEN/TS , 32 DD CEN/TS , 32 BS EN BS EN BS EN BS EN BS EN , 32 BS EN BS EN BS EN ISO , 32 BS EN BS EN BS EN , 32 BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO , 32 BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN , 32 BS EN , 21, 32 BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO , 32 BS EN , 32 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 18, 32 BS ISO BS ISO , 31 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 32 BS ISO BS ISO , 32 BS ISO BS ISO , 32 DD ISO/PAS , 32 PD CEN/TR , 32 PD CEN/TR PD PD ISO/TR PD ISO/TR PD ISO/TS PD ISO/TS PD IEC/TS BS A BS A BS A BS A BS A BS 2C BS C BS 2G BS 2G BS G BS 5G BS 4G BS 2G BS G BS 2G BS 3G BS G BS 4G BS 3G BS 2G BS 2G BS G BS G BS 3G BS G BS G BS G BS 2G BS 2G BS 3G BS G BS G BS G BS 2G BS G BS G BS G BS G BS G BS L BS L BS 5M BS 2M BS 2M BS 2M BS 3N BS N BS 4N BS 5N BS 7S BS 2S BS 2S BS S BS S BS S BS S BS S BS S BS 2S BS S BS S BS S BS S BS S BS 3T BS 3T BS 2T BS 2T BS T BS HC BS HC BS HC BS HC BS MA BS MA BS MA BS MA BS SP BS SP 51 and BS 2TA , 32 BS 2TA , 32 BS AU BS AU BS AU 169a...38 BS AU 193a...31 BS AU 237a...31 Health and environment BS BS BS BS , 31 BS DD CEN/TS , 32 BS EN BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN , 32 BS EN ISO BS EN BS EN BS EN , 32 BS ISO , 31 Update Standards December 2012 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO PD CEN/TR PD IEC/TR Information systems BS BS BS BS EN ISO , 32 BS EN , 32 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 22 BS EN BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC PD CEN/TS PD ISO/IEC TR PD ISO/IEC TR Management systems BS BS EN BS ISO BS ISO Materials and chemicals BS BS BS BS BS , 31 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 26 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 33 BS BS BS BS BS BS BS BS BS BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 31 BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 32 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 32 PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TS PD CEN ISO/TR Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 31 BS BS BS BS BS BS 2059/ BS 2059/ BS 2059/ BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 26 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS Update Standards December 2012 Prices may be subject to change.

7 Alpha-numeric Sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 33 BS BS BS BS BS , 31 BS , 31 BS BS BS BS BS BS , 32 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 31 BS BS BS BS BS BS BS BS BS BS BS BS , 31 BS BS BS BS BS BS , 31 BS BS BS BS , 18, 32 BS BS , 32 BS BS BS BS BS , 32 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BIP DD CEN/TS , 32 DD CEN/TS , 32 DD CEN/TS , 32 DD CEN/TS , 32 DD CEN ISO/TS BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN , 32 BS EN BS EN BS EN ISO , 32 BS EN BS EN BS EN , 32 BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO , 31 BS EN ISO BS EN ISO , 32 BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 32 BS EN BS EN ISO BS EN , 21, 32 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO , 32 BS EN , 32 BS EN BS EN ISO BS EN BS EN BS EN BS EN , 32 BS EN , 32 BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 32 BS EN ISO BS EN ISO BS EN ISO BS EN , 32 BS EN BS EN ISO , 32 BS EN BS EN BS EN BS EN , 32 BS EN , 31 BS EN , 31 BS EN BS EN BS EN BS EN BS EN , 32 BS EN , 32 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 32 BS EN BS EN , 22 BS EN BS EN BS EN BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 31 BS ISO BS ISO BS ISO Update Standards December 2012 Prices may be subject to change. 7

8 Alpha-numeric Sequence of British Standards continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 18, 32 BS ISO BS ISO , 31 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 31 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 32 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 32 BS ISO BS ISO BS ISO BS ISO BS ISO , 32 BS ISO BS ISO BS ISO/IEC BS ISO , 32 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 32 BS ISO BS IEC DD ISO/PAS , 32 DD ISO/TS DD ISO/TS DD ISO/TS , 32 DD ISO/TS DD ISO/TS DD IEC/TS , 32 PD CEN/TR , 32 PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TS , 32 PD CEN/TS PD CEN/TS PD CEN ISO/TS PD CEN ISO/TR PD PD PD ISO/TR PD ISO/TR PD ISO/TS PD ISO/TS PD ISO/TS PD ISO/IEC TR PD ISO/IEC TR PD IEC/TR PD IEC/TS PD IEC/TR BS A BS A BS A BS A BS A BS 2C BS C BS 2G BS 2G BS G BS 5G BS 4G BS 2G BS G BS 2G BS 3G BS 3G BS G BS 4G BS 2G BS 2G BS G BS G BS 3G BS G BS G BS G BS 2G BS 2G BS 3G BS G BS G BS G BS 2G BS G BS G BS G BS G BS G BS L BS L BS 5M BS 2M BS 2M BS 2M BS 3N BS N BS 5N BS 4N BS 7S BS 2S BS 2S BS S BS S BS S BS S BS S BS S BS 2S BS S BS S BS S BS S BS S BS 3T BS 3T BS 2T BS 2T BS T BS HC BS HC BS HC BS HC BS MA BS MA BS MA BS MA BS SP BS SP 51 and BS 2TA , 32 BS 2TA , 32 BS AU BS AU BS AU 169a...38 BS AU 193a...31 BS AU 237a...31 PAS Update Standards December 2012 Prices may be subject to change.

9 NEW Reduce fire risk and improve the safety of non-domestic buildings New edition of PAS 79 Fire Risk Assessment now available PAS 79:2012 Fire Risk Assessment. Guidance and a recommended methodology, is a well-respected document which has already made a positive contribution to enhancing fire safety and protecting and minimizing risk to the occupants of buildings. The standard provides a structured approach to fire risk assessment and is an essential document for fire professionals including fire risk assessors, fire safety consultants, health & safety consultants, building and property managers, facilities managers and consultancies providing fire risk assessments as a service. The revised edition aims to do even more as it includes: New guidance on the role of codes of practice and guidance documents as a basis for determining appropriate fire precautions New guidance on the approach that should be adopted in determining the appropriate fire precautions for existing buildings that do not confirm to current codes of practice applicable to new buildings (e.g. under current building regulations) A new annex that contains a competence standard for fire risk assessors, developed and agreed by stakeholders in the fire safety profession. The revised specification, PAS 79 has been drafted by CS Todd & Associates Ltd, who have been involved in and written the standard since its conception, in conjunction with BSI and a group of representatives from prominent UK fire safety organizations. Integral to the steering group are the Fire Industry Association, the Fire Protection Association and the Institution of Fire Engineers. shop.bsigroup.com/pas79us1212 To contact us visit shop.bsigroup.com/pas79us1212 or contact Customer Services quoting marketing reference code pas79-us1212 T F orders@bsigroup.com shop.bsigroup.com/pas79us1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

10 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2012 Fire extinguishing installations and equipment on premises. Selection and positioning of portable fire extinguishers. Code of practice supersedes BS :2000 ISBN FSH/2 BS 7858:2012 Security screening of individuals employed in a security environment. Code of practice supersedes BS 7858:2006+A2:2009, which remains current ISBN members, non-members GW/3/-/9 BS 7889:2012 Electric cables. Thermosetting insulated, nonarmoured cables with a voltage of 600/1000 V, for fixed installations supersedes BS 7889:1997 ISBN GEL/20/17 BS 8539:2012 Code of practice for the selection and installation of post-installed anchors in concrete and masonry ISBN members, non-members B/514 BS 8573:2012 Electric cables. Thermosetting insulated, nonarmoured cables with a voltage of 600/1000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire ISBN members, non-members GEL/20/17 BS :2012 Exchanging course related information. Course advertising profile. Specification ISBN IST/43 BS :2012 Exchanging course related information. Course advertising profile. Code of practice ISBN IST/43 BS 8587:2012 Guide to facility information management ISBN members, non-members FMW/1 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 232:2012 Baths. Connecting dimensions supersedes BS EN 232:2003 ISBN B/503 BS EN 251:2012 Shower trays. Connecting dimensions supersedes BS EN 251:2003 ISBN B/503 BS EN 492:2012 Fibre-cement slates and fittings. Product specification and test methods supersedes BS EN 492:2004 ISBN members, non-members B/542/4 BS EN 494:2012 Fibre-cement profiled sheets and fittings. Product specification and test methods supersedes BS EN 494:2004 ISBN members, non-members B/542/4 BS EN ISO 1120:2012 Conveyor belts. Determination of strength of mechanical fastenings. Static test method supersedes BS EN ISO 1120:2002 ISBN PRI/67 BS EN :2012 Copper and copper alloys. Plumbing fittings. Fittings with push-fit ends ISBN members, non-members NFE/34/3 BS EN :2012 Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes ISBN NFE/34/3 BS EN 1369:2012 Founding. Magnetic particle testing supersedes BS EN 1369:1997 ISBN ISE/111 BS EN 1730:2012 Furniture. Tables. Test methods for the determination of stability, strength and durability supersedes BS EN 1730:2000 ISBN members, non-members FW/0/1 10 Update Standards December 2012 Prices may be subject to change.

11 British Standards Online A faster, easier way to work with standards BSOL is the online standards database that makes using standards easier and more cost effective. With it, you can access over 55,000 British, adopted European and International Standards from your desktop. It s available 24/7 and revised every single day so you ll always be completely up to date. Save time With powerful search, alerts and links to related and superseded documents, finding the right document has never been easier. Reduce risk Having guaranteed access to the latest standards helps makes compliance with contracts or audit requirements simple. Start today Read case studies and arrange your free trial at: shop.bsigroup.com/bsolus1212 Get everything you need for less Choose from 53 subject related modules, or build your own collection with the standards you already use. Subscribing by subject area makes it affordable to have access to every standard in your industry. To contact us visit shop.bsigroup.com/bsolus1212 or contact Customer Services quoting marketing reference code BSOL-US1212 T F orders@bsigroup.com shop.bsigroup.com/bsolus1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

12 BS EN Publications continued... BS EN :2012 Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading supersedes BS EN :2002+A1:2009 ISBN members, non-members MTE/23 BS EN :2012 Safety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading supersedes BS EN :2004+A1:2009 ISBN members, non-members MTE/23 BS EN :2012 Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting supersedes BS EN :2005+A1:2009 ISBN members, non-members MTE/23 BS EN :2012 Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) supersedes BS EN :2007+A2:2009 ISBN members, non-members MTE/23 BS EN 1957:2012 Furniture. Beds and mattresses. Test methods for the determination of functional characteristics and assessment criteria supersedes BS EN 1957:2000 ISBN FW/0/2 BS EN 1976:2012 Copper and copper alloys. Cast unwrought copper products supersedes BS EN 1976:1998 ISBN NFE/34 BS EN :2012 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between 55ºC and 260ºC. General supersedes BS EN :2005 ISBN To order visit BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1 supersedes BS EN 12223:2000 ISBN WEE/46 BS EN :2012 Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse supersedes BS EN :2005 ISBN BS EN :2012 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55ºC and 260ºC. Screened and jacketed. General supersedes BS EN :2005 ISBN BS EN 3351:2012 Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De 150 mm supersedes BS 2TA 48:2009 and BS 2TA 51:2009 ISBN /-/49 BS EN :2012 Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150ºC continuous. Inserts. Product standard supersedes BS EN :2006 ISBN BS EN :2012 Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150ºC continuous. Size 2 receptacle. Product standard supersedes BS EN :2006 ISBN BS EN 4268:2012 Aerospace series. Metallic materials. Heat treatment facilities. General requirements ISBN BS EN :2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. General rules ISBN BS EN :2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for heat resisting alloys ISBN BS EN :2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for titanium and titanium alloys ISBN BS EN :2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for steels ISBN BS EN :2012 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. General ISBN BS EN ISO 5270:2012 Pulps. Laboratory sheets. Determination of physical properties supersedes BS EN ISO 5270:2000 ISBN PAI/11 BS EN ISO 5361:2012 Anaesthetic and respiratory equipment. Tracheal tubes and connectors ISBN members, non-members CH/121/5 BS EN ISO :2012 Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards. Software measurement standards supersedes BS EN ISO :2001 ISBN TDW/4 12 Prices may be subject to change. Update Standards December 2012

13 BS EN ISO 5814:2012 Water quality. Determination of dissolved oxygen. Electrochemical probe method supersedes BS EN 25814:1992 ISBN EH/3/2 BS EN ISO 6341:2012 Water quality. Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea). Acute toxicity test supersedes BS EN ISO 6341:1996 ISBN members, non-members EH/3/5 BS EN ISO 6556:2012 Laboratory glassware. Filter flasks supersedes BS 1739:1982 ISBN LBI/36 BS EN ISO :2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography. General guidelines and calculation of composition Together with BS EN ISO :2012, it supersedes BS EN ISO :2001 and BS EN ISO :2002, which are withdrawn ISBN members, non-members PTI/15 BS EN ISO :2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography. Uncertainty calculations Together with BS EN ISO :2012, it supersedes BS EN ISO :2001 and BS EN ISO :2002, which are withdrawn ISBN PTI/15 BS EN ISO 7866:2012 Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing supersedes BS EN 1975:2000 ISBN members, non-members PVE/3/3 BS EN ISO 9080:2012 Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation supersedes BS EN ISO 9080:2003 ISBN members, non-members PRI/88/4 BS EN ISO :2012 Paints and varnishes. Drying tests. Test using a mechanical recorder ISBN STI/10 BS EN ISO :2012 Paints and varnishes. Drying tests. Modified Bandow-Wolff test ISBN STI/10 BS EN :2012 Aerospace series. LOTAR. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data. Fundamentals and concepts ISBN members, non-members ACE/1 BS EN ISO 9394:2012 Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes supersedes BS EN ISO 9394:1998 ISBN CH/172/9 BS EN ISO :2012 Soft soldering fluxes. Test methods. Flux efficacy test, solder spread method supersedes BS EN ISO :2001 ISBN NFE/27/4 BS EN 10071:2012 Chemical analysis of ferrous materials. Determination of manganese in steels and irons Electrometric titration method supersedes BS EN 10071:1991 ISBN ISE/102 BS EN 10200:2012 Chemical analysis of ferrous materials. Determination of boron in steels. Spectrophotometric method supersedes BS EN 10200:1992 ISBN ISE/102 BS EN ISO 10380:2012 Pipework. Corrugated metal hoses and hose assemblies supersedes BS EN ISO 10380:2003 ISBN members, non-members GSE/42 BS EN ISO 10776:2012 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load ISBN B/553 BS EN ISO :2012 Biological evaluation of medical devices. Sample preparation and reference materials supersedes BS EN ISO :2009 ISBN members, non-members CH/194 BS EN ISO :2012 Needle-based injection systems for medical use. Requirements and test methods. Finished containers supersedes BS EN ISO :2001 ISBN CH/84 BS EN ISO :2012 Needle-based injection systems for medical use. Requirements and test methods. Automated functions ISBN CH/84 BS EN 12320:2012 Building hardware. Padlocks and padlock fittings. Requirements and test methods supersedes BS EN 12320:2001 ISBN B/538/4 BS EN ISO 12836:2012 Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy ISBN CH/106 BS EN :2012 Cranes. General Design. Limit States and proof competence of steel structure Together with BS EN :2004+A1:2009, BS EN :2011, BS EN , BS EN , BS EN and DD CEN/TS :2010, it supersedes BS :1983 and BS :1980, which will be withdrawn on publication of all parts of the BS EN series. It also supersedes DD CEN/TS :2004, which is withdrawn ISBN members, non-members MHE/3/1 Update Standards December 2012 Prices may be subject to change. 13

14 BS EN Publications continued... BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres supersedes BS EN 13237:2003 ISBN EXL/23 BS EN ISO 13287:2012 Personal protective equipment. Footwear. Test method for slip resistance supersedes BS EN ISO 13287:2007 ISBN PH/1 BS EN ISO 13297:2012 Small craft. Electrical systems. Alternating current installations supersedes BS EN ISO 13297:2001 ISBN members, non-members GME/33 BS EN :2012 Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements supersedes BS EN :2006 ISBN RHE/16 BS EN 13336:2012 Leather. Upholstery leather characteristics. Guide for selection of leather for furniture supersedes BS EN 13336:2004 ISBN TCI/69 BS EN :2012 Investigation and assessment of drain and sewer systems outside buildings. General Requirements supersedes BS EN :2003 ISBN members, non-members B/505 BS EN ISO 13588:2012 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology ISBN WEE/46 BS EN ISO :2012 Health informatics. Electronic health record communication. Reference model supersedes BS EN :2007 ISBN members, non-members IST/35 BS EN 13727:2012 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity in the medical area. Test method and requirements (phase 2, step 1) supersedes BS EN 13727:2003 ISBN members, non-members CH/216 BS EN ISO :2012 Safety of machinery. Safety-related parts of control systems. Validation supersedes BS EN ISO :2008 ISBN members, non-members MCE/3 BS EN 14116:2012 Tanks for transport of dangerous goods. Digital interface for product recognition devices for liquid fuels supersedes BS EN 14116:2007+A2:2010 ISBN members, non-members AUE/18 BS EN 14411:2012 Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking supersedes BS EN 14411:2006 ISBN members, non-members B/539 BS EN :2012 Facility Management. Guidelines for Performance Benchmarking ISBN members, non-members FMW/1 BS EN 15224:2012 Health care services. Quality management systems. Requirements based on EN ISO 9001:2008 supersedes DD CEN/TS 15224:2005 ISBN members, non-members CH/100 BS EN ISO 15535:2012 General requirements for establishing anthropometric databases supersedes BS EN ISO 15535:2006 ISBN members, non-members PH/9/-/4 BS EN 16005:2012 Power operated pedestrian doorsets. Safety in use. Requirements and test methods ISBN members, non-members B/538 BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment ISBN EH/3/5 BS EN ISO 16177:2012 Footwear. Resistance to crack initiation and growth. Belt flex method ISBN TCI/69 BS EN 16222:2012 Cathodic protection of ship hulls ISBN members, non-members GEL/603 BS EN 16257:2012 Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100 mm dia (nom) ISBN AUE/18 BS EN 16260:2012 Water quality. Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data ISBN EH/3/5 BS EN :2012 Pumps. Rotodynamic pumps. Glandless circulators. Energy efficiency index (EEI) for circulators integrated in products ISBN MCE/6 BS EN ISO :2012 Geometrical product specifications (GPS). General concepts. Basic tenets, specifications, operators, uncertainties and ambiguities supersedes DD ISO/TS :2002 ISBN TDW/4 BS EN ISO 20433:2012 Leather. Tests for colour fastness. Colour fastness to crocking supersedes BS ISO 20433:2005 ISBN TCI/69 14 Update Standards December 2012 Prices may be subject to change.

15 NEW European standard for general audit BS EN Energy audit Can you afford not to have an energy audit? The first step towards reducing energy consumption and increasing energy efficiency is to carry out an energy audit. BS EN Energy Audits helps to identify energy saving opportunities within your organization allowing you to deal with waste and inefficiencies and improving your returns on investment. This standard defines what constitutes a good energy audit so that you can feel confident that whatever the size or type of your organization, you are able to control energy use, reduce energy costs and meet your environmental responsibilities. And if you re a consultant, you can offer the best energy audit advice, standardized to meet the European Energy Services Directive 2006/32/EC. Use the standard alone or in conjunction with BS EN ISO Energy Management Systems to enjoy the benefits of good energy management practice. shop.bsigroup.com/bsen16247us1212 Why not take a Quick look at some BS EN ISO Energy Management case studies: shop.bsigroup.com/50001casestudiesus1212 To contact us visit shop.bsigroup.com/bsen16247us1212 or contact Customer Services quoting marketing reference code bsen16247us1212 T F orders@bsigroup.com shop.bsigroup.com/bsen16247us1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

16 BS EN Publications continued... BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. General rules Together with parts 2, 3, 4, 5, and 6 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN members, non-members B/526/3 BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using open systems Together with parts 1, 3, 4, 5, and 6 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN members, non-members B/526/3 BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. Water pressure tests in rock Together with parts 1, 2, 4, 5, and 6 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN members, non-members B/526/3 BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. Pumping tests Together with parts 1, 2, 3, 5, and 6 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN members, non-members B/526/3 BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. Infiltrometer tests Together with parts 1, 2, 3, 4, and 6 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN B/526/3 BS EN ISO :2012 Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using closed systems Together with parts 1, 2, 3, 4, and 5 of BS EN ISO 22282, it partially supersedes BS 5930:1999+A2:2010 ISBN B/526/3 BS EN ISO :2012 Energy performance of lifts, escalators and moving walks. Energy measurement and verification ISBN MHE/4 BS EN ISO :2012 Hand-held portable power tools. Test methods for evaluation of vibration emission. Die grinders supersedes BS EN ISO :1997 ISBN MCE/8/-/2 BS EN 60294:2012 Measurement of the dimensions of a cylindrical component with axial terminations supersedes BS 5692:1979 ISBN EPL/40X BS EN 60301:2012 Preferred diameters of wire terminations of capacitors and resistors supersedes BS 5693:1978 ISBN EPL/40X BS EN :2012 Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 supersedes BS EN :2000 ISBN GEL/55 BS EN :2012 Specifications for particular types of winding wires. Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 supersedes BS EN :2000 ISBN GEL/55 BS EN :2012 Connectors for electronic equipment. Tests and measurements. Test schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power ISBN EPL/48 BS EN :2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials. Procedures for irradiation and test supersedes BS :1995 ISBN GEL/112 BS EN :2012 Fire hazard testing. Test flames. 500 W flames. Apparatus and confirmational test methods supersedes DD IEC/TS :2004 ISBN members, non-members GEL/89 BS EN :2012 Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods Together with BS EN , BS EN , BS EN , BS EN and BS EN , it supersedes BS EN :2003, which will be withdrawn when all parts listed above have been published ISBN GEL/86/1 BS EN :2012 Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Cabinet interface dimensions for miscellaneous equipment ISBN EPL/48 BS EN 61240:2012 Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules supersedes BS EN 61240:1997 ISBN EPL/49 BS EN :2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures supersedes BS EN :2007 ISBN GEL/86/2 BS EN :2012 Mechanical structures for electronic equipment. Tests for IEC and IEC series. Combination of performance levels for modular cabinets ISBN EPL/48 BS EN :2012 Low-voltage surge protective devices. Surge protective devices connected to low-voltage power systems. Requirements and test methods supersedes BS EN :2002 ISBN members, non-members PEL/37/1 16 Update Standards December 2012 Prices may be subject to change.

17 BS EN :2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SF connector family ISBN GEL/86/2 BS EN :2012 Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites supersedes BS EN :2003 ISBN L/-/90 BS EN :2010 Power installations exceeding 1 kv a.c. Common rules Together with BS EN 50522:2010, it partially supersedes BS 7354:1990 ISBN members, non-members PEL/99 BS EN :2012 Fibre optic active components and devices. Test and measurement procedures. Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces ISBN GEL/86/3 BS EN :2012 Fuel cell technologies. Stationary fuel cell power systems. Installation supersedes BS EN :2008 ISBN GEL/105 BS EN :2012 Organic light emitting diode (OLED) displays. Measuring methods of image quality ISBN members, non-members EPL/47 BS EN :2012 Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) supersedes BS EN :2010 ISBN members, non-members AMT/7 BS EN :2012 Safety requirements for power electronic converter systems and equipment. General ISBN members, non-members PEL/22 BS EN :2012 OPC unified architecture. Profiles ISBN members, non-members AMT/7 BS EN :2012 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality. Guidelines for the use ISBN EPL/49 BS EN 62585:2012 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter ISBN members, non-members EPL/29 BS EN 62628:2012 Guidance on software aspects of dependability ISBN members, non-members DS/1 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 251:2012 Conveyor belts with textile carcass. Widths and lengths supersedes BS ISO 251:2003 ISBN PRI/67 BS ISO 614:2012 Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing ISBN SME/32/-/8 BS ISO 1751:2012 Ships and marine technology. Ships side scuttles ISBN SME/32/-/8 BS ISO 3394:2012 Packaging. Complete, filled transport packages and unit loads. Dimensions of rigid rectangular packages supersedes BS 6837:1987 ISBN PKW/0 BS ISO 3434:2012 Ships and marine technology. Heated glass panes for ships rectangular windows supersedes BS ISO 3434:1992 ISBN SME/32/-/8 BS ISO 3676:2012 Packaging. Complete, filled transport packages and unit loads. Unit load dimensions ISBN PKW/0 BS ISO 3903:2012 Ships and marine technology. Ships ordinary rectangular windows ISBN SME/32/-/8 BS ISO 4164:2012 Mopeds. Engine test code. Net power ISBN AUE/14 BS ISO 4383:2012 Plain bearings. Multilayer materials for thinwalled plain bearings supersedes BS ISO 4383:2000 ISBN MCE/12 BS ISO :2012 Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials supersedes BS ISO :2000 ISBN MCE/12 BS ISO :2012 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm supersedes BS :1992 ISBN MCE/12 Update Standards December 2012 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO :2012 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm supersedes BS :1992 ISBN MCE/12 BS ISO :2012 Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test supersedes BS :1991 ISBN MCE/21/5 BS ISO 5285:2012 Conveyor belts. Guidelines for storage and handling supersedes BS ISO 5285:2004 ISBN PRI/67 BS ISO :2012 Implants for surgery. Ceramic materials. Composite materials based on a high-purity alumina matrix with zirconia reinforcement Together with BS ISO :2010 it supersedes BS :1997, which is withdrawn ISBN CH/150/1 BS ISO :2012 Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of bearing metals supersedes BS ISO :1999 ISBN MCE/12 BS ISO :2012 Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of polymer-based bearing materials supersedes BS ISO :1999 ISBN members, non-members MCE/12 BS ISO :2012 Rubber. Analysis by pyrolytic gaschromatographic methods. Determination of styrene/butadiene/isoprene ratio supersedes BS ISO :2005 ISBN PRI/23 BS ISO 7365:2012 Shipbuilding and marine structures. Deck machinery. Towing winches for deep sea use ISBN SME/32/-/4 BS ISO 9334:2012 Optics and photonics. Optical transfer function. Definitions and mathematical relationships supersedes BS ISO 9334:2007 ISBN members, non-members CPW/172 BS ISO 9335:2012 Optics and photonics. Optical transfer function. Principles and procedures of measurement supersedes BS ISO 9335:1995 ISBN members, non-members CPW/172 BS ISO 9836:2011 Performance standards in building. Definition and calculation of area and space indicators Together with BS EN :2011 it supersedes BS 7641:1993 which is withdrawn ISBN CB/101 BS ISO 10383:2012 Securities and related financial instruments. Codes for exchanges and market identification (MIC) ISBN IST/12 BS ISO :2012 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers. Systems for rearwardfacing wheelchair-seated passengers ISBN members, non-members CH/173/1 BS ISO/IEC :2012 Identification cards. Optical memory cards. General characteristics supersedes BS ISO/IEC 11693:2005 ISBN IST/17 BS ISO/IEC :2012 Identification Cards. Optical memory cards. Linear recording method. Physical characteristics supersedes BS ISO/IEC :2005 ISBN IST/17 BS ISO :2012 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Butt fusion ISBN PRI/88/2 BS ISO :2012 Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture. Testing of satellite-based auto-guidance systems during straight and level travel ISBN AGE/6 BS ISO 12492:2012 Rubber, raw. Determination of water content by Karl Fischer method ISBN PRI/23 BS ISO :2012 Thermal insulation. Exterior insulating systems for foundations. Material specification ISBN B/540 BS ISO :2012 Ships and marine technology. Risk assessment on anti-fouling systems on ships. Marine environmental risk assessment method of biocidally active substances used for antifouling systems on ships ISBN members, non-members SME/32/-/2 BS ISO 13110:2012 Cigarettes. Determination of menthol in smoke condensates. Gas-chromatographic method ISBN AW/40 BS ISO 13153:2012 Framework of the design process for energysaving single-family residential and small commercial buildings ISBN members, non-members RHE/2 BS ISO 13713:2012 Ships and marine technology. Ships mooring and towing fittings. Mooring chocks ISBN SME/32/-/4 BS ISO 13728:2012 Ships and marine technology. Ships mooring and towing fittings. Panama chocks ISBN SME/32/-/4 18 Update Standards December 2012 Prices may be subject to change.

19 BS ISO/IEC :2012 Information technology. Software measurement. Functional size measurement. Guide for use of ISO/IEC series and related International Standards supersedes BS ISO/IEC :2006 ISBN IST/15 BS ISO 14188:2012 Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings ISBN STI/40 BS ISO :2012 Grout for prestressing tendons. Basic requirements ISBN B/525/2 BS ISO :2012 Grout for prestressing tendons. Grouting procedures ISBN B/525/2 BS ISO :2012 Grout for prestressing tendons. Test methods ISBN B/525/2 BS ISO/IEC 15424:2008 Information technology. Automatic identification and data capture techniques. Data Carrier Identifiers (including Symbology Identifiers) supersedes BS ISO/IEC 15424:2000 ISBN IST/34 BS ISO/IEC :2009 Information technology. Unique identifiers. Grouping of transport units ISBN IST/34 BS ISO/IEC 15963:2009 Information technology. Radio frequency identification for item management. Unique identification for RF tags supersedes BS ISO/IEC 15963:2004 ISBN IST/34 BS ISO :2012 Road vehicles. Ergonomic requirements for the drivers workplace in line-service buses. General description, basic requirements supersedes BS ISO :2005 ISBN AUE/12 BS ISO 16437:2012 Ships and marine technology. Lifesaving and fire protection. Atmospheric oil mist detectors for ships ISBN members, non-members SME/32/-/1 BS ISO/IEC :2012 Information technology. Radio frequency identification for item management. Reference architecture and definition of parameters to be standardized supersedes BS ISO/IEC :2004 ISBN members, non-members IST/34 BS ISO/IEC :2009 Information technology. Radio frequency identification for item management. Parameters for air interface communications below 135 khz supersedes BS ISO/IEC :2004 ISBN members, non-members IST/34 BS ISO/IEC :2008 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 2,45 GHz supersedes BS ISO/IEC :2004 ISBN members, non-members IST/34 BS ISO :2012 Document management. Electronic document file format for long-term preservation. Use of ISO with support for embedded files (PDF/A-3) ISBN members, non-members IDT/1/2 BS ISO/IEC :2012 Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA). Interfaces ISBN members, non-members IST/15 BS ISO/IEC :2012 Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA). Interoperability supersedes BS ISO/IEC :2003 ISBN members, non-members IST/15 BS ISO/IEC :2012 Information technology. Object Management Group. Common Object Request Broker Architecture (CORBA). Components ISBN members, non-members IST/15 BS ISO/IEC :2008 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Optically readable media (ORM) supersedes BS ISO/IEC :2005 ISBN IST/34 BS ISO/IEC :2008 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. General terms relating to radio communications ISBN members, non-members IST/34 BS ISO/IEC :2008 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Locating systems ISBN IST/34 BS ISO 21005:2012 Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles supersedes BS ISO 21005:2004 ISBN SME/32/-/8 BS ISO 23317:2012 Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials supersedes BS ISO 23317:2007 ISBN CH/150/1 Update Standards December 2012 Prices may be subject to change. 19

20 BS Implementations continued... BS ISO/IEC 24778:2008 Information technology. Automatic identification and data capture techniques. Aztec Code bar code symbology specification ISBN members, non-members IST/34 BS ISO 26900:2012 Space data and information transfer systems. Orbit data messages supersedes BS ISO 22664:2005 ISBN members, non-members 8/-/7 BS ISO/IEC 27013:2012 Information technology. Security techniques. Guidance on the integrated implementation of ISO/IEC and ISO/IEC ISBN members, non-members IST/33 BS ISO/IEC 27037:2012 Information technology. Security techniques. Guidelines for identification, collection acquisition, and preservation of digital evidence ISBN members, non-members IST/33 BS ISO/IEC 29133:2010 Information technology. Automatic identification and data capture techniques. Quality test specification for rewritable hybrid media data carriers ISBN IST/34 BS ISO/IEC :2012 Information technology. Security techniques. Lightweight cryptography. Stream ciphers ISBN members, non-members IST/33 BS ISO 30004:2012 Ships and marine technology. Ship recycling management systems. Guidelines for the implementation of ISO ISBN members, non-members SME/32 BS ISO 30005:2012 Ships and marine technology. Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations supersedes DD ISO/PAS 30005:2010 ISBN members, non-members SME/32 BS ISO 39001:2012 Road traffic safety (RTS) management systems. Requirements with guidance for use ISBN members, non-members HS/1/2 BS IEC :2012 (BS :2012) Electric cables. Calculation of the current rating. Sections on operating conditions. Economic optimization of power cable size ISBN members, non-members GEL/20/16 PUBLISHED DOCUMENTS PD :2012 UK Non-Contradictory Complementary Information to Eurocode 5: Design of timber structures. General. Common rules and rules for buildings ISBN members, non-members B/525/5 PD CEN/TR 764-6:2012 Pressure equipment. Structure and content of operating instructions supersedes DD CEN/TS 764-6:2004 ISBN PVE/1 PD ISO/TR 11225:2012 Space environment (natural and artificial). Guide to reference and standard atmosphere models ISBN members, non-members 8/-/4 PD ISO/TR 12942:2012 Compressors. Classification. Complementary information to ISO 5390 ISBN members, non-members MCE/8 PD CEN/TS :2012 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method supersedes DD CEN/TS :2008 ISBN B/515 PD CEN/TR :2012 Oil spill identification. Waterborne petroleum and petroleum products. Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses supersedes PD CEN/TR :2006 ISBN members, non-members PTI/12 PD CEN/TR :2012 Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring. Evaluation of airborne particle concentrations using photometers ISBN EH/2/2 PD CEN/TS 16346:2012 Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate ISBN PTI/13 PD CEN/TR 16369:2012 Use of control charts in the production of concrete ISBN members, non-members B/517/1 PD CEN/TR 16395:2012 Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document ISBN GSE/33 PD CEN/TR 16410:2012 Construction products. Assessment of release of dangerous substances. Barriers to use. Extension to CEN/TR Barriers to trade ISBN members, non-members B/557 PD CEN/TR 16411:2012 Child use and care articles compiled interpretations of CEN/TC 252 standards ISBN members, non-members CW/1/2 20 Update Standards December 2012 Prices may be subject to change.

21 PD CEN/TR 16417:2012 Footwear. Footwear industry guideline for substances of very high concern (Annex XIV of REACH) ISBN TCI/69 PD CEN/TR 16422:2012 Classification of thermoregulatory properties ISBN members, non-members TCI/24 PD CEN/TS 16428:2012 Biometrics Interoperability profiles. Best Practices for slap tenprint captures ISBN IST/17 PD ISO/TS 16697:2012 Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials ISBN PD CEN ISO/TS :2012 Electronic fee collection. Charging performance. Metrics ISBN members, non-members EPL/278 PD ISO/TS :2012 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. type 2 ISBN AUE/16 PD ISO/TS :2012 Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. European Colour Initiative RGB colour image encoding [ecirgb (2008)] ISBN CPW/42 PD ISO/IEC TR 24720:2008 Information technology. Automatic identification and data capture techniques. Guidelines for direct part marking (DPM) ISBN members, non-members IST/34 PD CEN ISO/TR 27165:2012 Thermoplastics piping systems. Guidance for definitions of wall constructions for pipes ISBN PRI/88 PD ISO/IEC TR 29158:2011 Information technology. Automatic identification and data capture techniques. Direct Part Mark (DPM) Quality Guideline ISBN IST/34 PD IEC/TR 62130:2012 Climatic field data including validation ISBN members, non-members GEL/104 PD IEC/TS 62743:2012 Radiation protection instrumentation. Electronic counting dosemeters for pulsed fields of ionizing radiation ISBN NCE/2 PD IEC/TR :2012 Application of risk management for IT-networks incorporating medical devices. Step-by-step risk management of medical IT-networks. Practical applications and examples ISBN members, non-members CH/62/1 PD IEC/TR :2012 Application of risk management for IT-networks incorporating medical devices. Guidance for the disclosure and communication of medical device security needs, risks and controls ISBN members, non-members CH/62/1 PD IEC/TR :2012 Application of risk management for IT-networks incorporating medical devices. Guidance for wireless networks ISBN members, non-members CH/62/1 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 250:2012 Low-level work platform with one working platform with side protection for use by one person with a maximum working platform height of less than 2.5 m. Specification ISBN members, non-members SPECIALIST BOOKS FROM BSI BIP 0133:2012 Information Security Management Systems (ISMS) Risk Collection ISBN members, non-members CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS EN 207:2009 Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eyeprotectors) CORRIGENDUM 1 PH/2 BS EN :2004+A1:2009 Cranes. General design. General principles and requirements CORRIGENDUM 3 MHE/3/1 BS EN ISO :2012 Geographic information. Classification systems. Classification system structure CORRIGENDUM 2 IST/36 Update Standards December 2012 Prices may be subject to change. 21

22 Corrigenda to British Standards continued... BS EN 50522:2010 Earthing of power installations exceeding 1 kv a.c. CORRIGENDUM 1 PEL/99 BS EN :2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments CORRIGENDUM 1 GEL/210/12 BS ISO :2012 Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes CORRIGENDUM 1 MCE/11 BS ISO 11839:2010 Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown sawteeth. Test method and performance criteria CORRIGENDUM 1 AGE/29 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS :2011+A1:2012 Domestic bedding. Specification for mattresses and bumpers for children s cots, perambulators and similar domestic articles AMENDMENT 1 CW/1/3 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you BS EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout. Admixtures for masonry mortar. Definitions, requirements, conformity and marking and labelling AMENDMENT 1 B/517/3 BS EN ISO :2008+A1:2012 Ergonomics of human-system interaction. Design criteria for physical input devices AMENDMENT members, non-members PH/9 BS EN 13204:2004+A1:2012 Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements AMENDMENT members, non-members FSH/17/9 BS EN 14592:2008+A1:2012 Timber structures. Dowel-type fasteners. Requirements AMENDMENT members, non-members B/518 BS EN 50177:2009+A1:2012 Stationary electrostatic application equipment for ignitable coating powders. Safety requirements AMENDMENT 1 EXL/31/-/1 BS EN :2007+A1:2012 Plugs, socket-outlets and couplers for industrial purposes. Switched socket-outlets and connectors with or without interlock AMENDMENT 1 PEL/23/4 BS EN :2010+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for deep fat fryers, frying pans and similar appliances AMENDMENT 11 CPL/61/7 BS EN :2010+A1:2012 Industrial communication networks. High availability automation networks. General concepts and calculation methods AMENDMENT members, non-members AMT/7 BS ISO 212:2007+A1:2012 Essential oils. Sampling AMENDMENT 1 AW/54 BS ISO :2002+A1:2012 Horological vocabulary. Technical and commercial definitions AMENDMENT members, non-members STI/53 BS ISO 6534:2007+A1:2012 Forestry machinery. Portable chain-saw handguards. Mechanical strength AMENDMENT 1 AGE/29 BS ISO 7914:2002+A1:2012 Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes AMENDMENT 1 AGE/29 BS ISO 8843:2005+A1:2012 Aircraft. Crimp-removable contacts for electrical connectors. Identification system AMENDMENT 1 BS ISO :2007+A1:2012 Cheese, cheese rind and processed cheese. Determination of natamycin content. Molecular absorption spectrometric method for cheese rind AMENDMENT 1 AW/5 BS SP 8:1939+A7:2012 Specification for turnbuckles (tension rod type) for aircraft purposes AMENDMENT 7 ACE/12 BS SP 51 and 52:1953+A3:2012 Specifications for Identification tags for swaged cable-end assemblies. For aircraft AMENDMENT 3 ACE/12 NA to BS EN :2004+A1:2008 UK National Annex to Eurocode 5: Design of timber structures. General. Common rules and rules for buildings AMENDMENT 2 B/525/5 22 Update Standards December 2012 Prices may be subject to change.

23 BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 January, BS :1997 Insulator and conductor fittings for overhead power lines. Performance and general requirements PEL/11 BS 3492:1987 Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels PRI/66 BS 5122:1986 Specification for rubber hoses for low-pressure and medium-pressure saturated steam PRI/66 BS :1990 Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Determination of volumetric expansion of hydraulic hoses PRI/66 BS 5342:1985 Specification for rubber hoses for high-pressure saturated steam PRI/66 Please do not send confirmation of orders placed by telephone as it can lead to duplication BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 122-1:1953 Specification for milling cutters and reamers. Milling cutters MTE/18 BS 302-5:1987 Stranded steel wire ropes. Specification for ropes for hauling purposes MHE/2 BS 463-1:1958 Specification for sockets for wire ropes. Inch units MHE/2 BS 463-2:1970 Specification for sockets for wire ropes. Metric units MHE/2 BS 466:1984 Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use MHE/3/3 BS 469:1995 Specification for railway signalling lamps CPL/34/1 BS 489:1999 Specification for turbine lubricants PTI/7 BS 500:2000 Steel sleepers RAE/2 BS 643:1970 Specification for white metal ingots for capping steel wire ropes NFE/27 BS 714:1950 Specification. Cartridge fuse-links for use in railway-signalling circuits PEL/32 BS 764:1990 Specification for automatic change-over contactors for emergency lighting systems PEL/17/2 BS 1050:1984 Specification for indicator lamps for use in telecommunication apparatus and for allied purposes CPL/34/1 BS :1977 Specification for jig bushes. Metric units MTE/18 BS 1125:1987 Specification for WC flushing cisterns (including dual flush cisterns and flush pipes) B/503 BS :1988 Packaging code. Paper and board wrappers, bags and containers. Moulded pulp packaging PKW/0/-/9 BS :1990 Packaging code. Metal containers. Tins and cans PKW/0/-/8 BS :1991 Packaging code. Tensional strapping PKW/0 BS :1986 Packaging code. Use of desiccants in packaging PKW/0 BS :1991 Packaging code. Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials PKW/0/-/10 BS :1989 Packaging code. Packaging in plastics containers PKW/0/-/10 BS 1188:1974 Specification for ceramic wash basins and pedestals B/503 BS 1203:2001 Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method PRI/52 BS 1206:1974 Specification for fireclay sinks: dimensions and workmanship B/503 BS 1254:1981 Specification for WC seats (plastics) B/503 Update Standards December 2012 Prices may be subject to change. 23

24 British Standards Reviewed and Confirmed continued... BS :1970 Specification for single point cutting tools. Shank sections MTE/18 BS :1972 Specification for single point cutting tools. Nomenclature MTE/18 BS :1978 Specification for single point cutting tools. Buttwelded cutting tools and blanks MTE/18 BS :1978 Specification for single point cutting tools. Ground high speed steel tool bits MTE/18 BS :1994 Methods of testing vitreous enamel finishes. Determination of resistance to thermal shock of coatings on articles other than cooking utensils and fabricated sheet steel components STI/36 BS :1994 Methods of testing vitreous enamel finishes. Determination of resistance to thermal shock of coatings for fabricated sheet steel components such as burners and pan supports for cookers STI/36 BS 1362:1973 Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs) PEL/32 BS 1413:1989 Specification for page size for books PAI/43 BS 1564:1975 Specification for pressed steel sectional rectangular tanks PVE/20 BS :1973 Containers for pharmaceutical dispensing. Eye dropper bottles PKW/0 BS :1994 Containers for pharmaceutical dispensing. Specification for glass medicine bottles PKW/0 BS :1968 Specification for containers for pharmaceutical dispensing. Ribbed oval glass bottles PKW/0 BS :1992 Containers for pharmaceutical dispensing. Specification for glass and plastics containers for solid dosage forms, semi-solids and powders PKW/0 BS 1683:1987 Specification for coated aluminium foil for wrapping processed cheese PKW/0 BS 1702:1950 Specification for mild steel drums (heavy duty fixed ends) PKW/0/-/4 BS 1759:1969 Specification for knurling wheels MTE/18 BS 1876:1990 Specification for automatic flushing cisterns for urinals B/503 BS 2003:1974 Specification for mild steel drums (light duty: removable heads) PKW/0/-/4 BS 2059/1:1957 Summary sheet: straight sided splines. Bottom fitting. Shallow MCE/5 BS 2059/2:1957 Summary sheet: straight sided splines. Bottom fitting. Deep MCE/5 BS 2059/3:1957 Summary sheet: straight sided serrations. Internal and external MCE/5 BS 2059:1953 Specification for straight-sided splines and serrations MCE/5 BS 2501:1992 Specification for commercial refrigerated storage cabinets of the closed reach-in type RHE/19 BS 2502:1979 Specification for manufacture of sectional cold rooms (walk-in type) RHE/19 BS 2548:1986 Specification for wood wool for general packaging purposes PKW/0/-/11 BS 2626:1992 Specification for lubricants for refrigerant compressors PTI/7 BS :1956 Fuses for voltages exceeding 1000 V a.c. Expulsion fuses PEL/32 BS :Methods 131C and 131D:1978 Methods of testing plastics. Thermal properties. Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings PRI/42 BS :Method 432D:1995 Methods of testing plastics. Chemical properties. Determination of styrene evaporation from unsaturated polyester resins PRI/42 BS :Method 721A:1988 Methods of testing plastics. Rheological properties. Determination of resin flow from resin impregnated glass fabric PRI/21 BS :Methods 823A and 823B:1978 Methods of testing plastics. Other properties. Methods for the assessment of carbon black dispersion in polyethylene using a microscope PRI/21 BS :Method 835A:1980 Methods of testing plastics. Other properties. Determination of gelation time of phenolic resins PRI/21 BS :Method 835B:1980 Methods of testing plastics. Other properties. Determination of gelation time of polyester resins (manual method) PRI/21 BS 2837:1988 Specification for steel links and strap assemblies for lifting attachments for packing cases PKW/0 BS 2987:1958 Notes on the application of statistics to paper testing PAI/11 BS 3036:1958 Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) PEL/32 BS 3092:1973 Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines MCE/14 BS 3110:1959 Methods for measuring the rub resistance of print PAI/43 24 Update Standards December 2012 Prices may be subject to change.

25 BS :1990 Glossary of packaging terms. Paper and board packaging PKW/0/-/9 BS :1976 Glossary of packaging terms. Metal containers and aerosols PKW/0/-/8 BS :1994 Glossary of packaging terms. Plastics and flexible packaging (excluding paper) PKW/0/-/10 BS :1981 Glossary of packaging terms. Wooden packaging PKW/0/-/11 BS :1974 Specification for investment castings in metal. Carbon and low alloy steels ISE/NFE/6 BS :1975 Specification for investment castings in metal. Corrosion and heat resisting steels, nickel and cobalt base alloys ISE/NFE/6 BS 3166:1959 Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20ºF to 220ºF (-30ºC to 105ºC) RHE/31 BS 3170:1972 Specification for flexible couplings for power transmission MCE/5 BS 3231:1960 Specification for thermographs (bimetallic type) for air temperatures within the range 0ºF to 140ºF (-20ºC to 60ºC) RHE/31 BS :1968 Specification for aluminium capping foil and strip for dairy product containers. Aluminium capping foil for glass containers PKW/0 BS 3332:1987 Specification for white metal bearing alloy ingots NFE/27 BS 3379:1975 Specification for flexible urethane foam for loadbearing applications PRI/71 BS :1991 Woven glass fibre fabrics for plastics reinforcement. Specification for loom-state fabrics PRI/42 BS :1987 Woven glass fibre fabrics for plastics reinforcement. Specification for desized fabrics PRI/42 BS :1987 Woven glass fibre fabrics for plastics reinforcement. Specification for finished fabrics for use with polyester resin systems PRI/42 BS 3403:1972 Specification for indicating tachometer and speedometer systems for industrial, railway and marine use MCE/14 BS 3529:1962 Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines MCE/14 BS 3532:1990 Method of specifying unsaturated polyester resin systems PRI/42 BS 3537:1979 Specification for gudgeon pins up to 200 mm diameter MCE/14 BS :1986 Steel wire for hose reinforcement. Specification for coated round and flat steel wire for rubber hose reinforcement ISE/106 BS 3649:1963 Recommendations for original printing plates PAI/43 BS 3749:1991 Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems PRI/42 BS 3816:1989 Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies PRI/42 BS :1974 Specification for hardmetal dies and associated hardmetal tools. Designation and marking of as-sintered pellets and finished dies MTE/18 BS :1974 Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round wire MTE/18 BS :1974 Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round bar MTE/18 BS 3903:1977 Methods of test for sulphuric acid, oleum and liquid sulphur trioxide CII/37 BS 4048:Parts 1 and 2:1966 Specification for combined wire and fibre ropes. Combined ropes. Spring lay ropes MHE/2 BS 4089:1999 Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases GSE/42 BS 4110:1999 Specification for visors for vehicle users PH/2/2 BS :1972 Specification for metric keys and keyways. Parallel and taper keys MCE/5 BS :1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of iron content CII/37 BS :1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of sulphate content CII/37 BS :1975 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of fluorine content CII/37 BS :1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of silica content CII/37 BS :1978 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method CII/37 BS :1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of chloride content CII/37 Update Standards December 2012 Prices may be subject to change. 25

26 British Standards Reviewed and Confirmed continued... BS :1990 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of soluble sulphate content (potentiometric method) CII/37 BS :1987 Ammonium nitrate. General introduction CII/37 BS :1988 Ammonium nitrate. Method for determination of ammoniacal nitrogen content CII/37 BS :1988 Ammonium nitrate. Method for determination of total nitrogen content CII/37 BS :1987 Ammonium nitrate. Method for determination of sulphated ash CII/37 BS :1987 Ammonium nitrate. Methods for determination of nitrite content CII/37 BS :1987 Ammonium nitrate. Methods for determination of chloride content CII/37 BS :1987 Ammonium nitrate. Method for determination of sulphate content CII/37 BS :1994 Ammonium nitrate. Method for determination of matter soluble in diethyl ether CII/37 BS :1994 Ammonium nitrate. Method for determination of inorganic matter and grit insoluble in water CII/37 BS 4276:1968 Specification for hard metal for wire, bar and tube drawing dies MTE/18 BS 4277:1968 Glossary of terms used in offset lithographic printing PAI/43 BS :1989 Baths for domestic purposes made of acrylic material. Specification for connecting dimensions B/503 BS 4367:1968 Methods of test for nitric acid CII/37 BS :1991 Electrically operated blood storage refrigerators. Specification for closed reach-in types RHE/19 BS :1996 Electrically operated blood storage refrigerators. Specification for cabinets for the storage of frozen plasma RHE/19 BS 4431:1989 Methods of sampling and test for liquefied anhydrous ammonia CII/37 BS 4475:2000 Specification for straight mineral lubricating oils PTI/7 BS :1990 Design of articles that are to be coated. General recommendations STI/33 BS :1990 Design of articles that are to be coated. Recommendations for electroplated and autocatalytic coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for conversion coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for paint coatings and varnish coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for anodic oxidation coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for thermally sprayed coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for vitreous enamel coatings STI/33 BS :1990 Design of articles that are to be coated. Recommendations for low pressure and vacuum deposited coatings STI/33 BS 4506:1970 Specification for shaft ends MCE/5 BS 4507:1969 Specification for grease gun cartridges (composite type) GME/24 BS 4602:1977 Specification for the use of metric units in specifications for glass containers and finishes PKW/0/-/7 BS :1987 Ammonia solution. Methods for sampling CII/37 BS :1988 Ammonia solution. Method for determination of density at 20ºC CII/37 BS :1988 Ammonia solution. Method for determination of residue after heating at 850ºC CII/37 BS :1988 Ammonia solution. Method for determination of iron content CII/37 BS :1988 Ammonia solution. Methods for determination of chloride content CII/37 BS :1988 Ammonia solution. Method for determination of carbon dioxide content CII/37 BS 4756:1998 Specification for ready-mixed aluminium priming paints for woodwork STI/28 BS 4764:1986 Specification for powder cement paints STI/28 BS 4823:1972 Guide to the selection of fitment bores for cylindrical shaft ends MCE/5 26 Update Standards December 2012 Prices may be subject to change.

27 BS :1972 Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for heating duties; without additional ducting RHE/6 BS :1975 Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for cooling duties: without additional ducting RHE/6 BS :1975 Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for heating and cooling duties; with additional ducting RHE/6 BS :1997 Methods for testing and rating fan coil units, unit heaters and unit coolers. Determination of sound power levels of fan coil units, unit heaters and unit coolers using reverberating rooms RHE/6 BS :1972 Methods for testing and rating terminal reheat units for air distribution systems. Thermal and aerodynamic performance RHE/6 BS :1978 Methods for testing and rating terminal reheat units for air distribution systems. Acoustic testing and rating RHE/6 BS :1973 Specification for urinals. Stainless steel slab urinals B/503 BS 4901:1976 Specification for plastics colours for building purposes STI/14 BS :1973 Methods for testing and rating induction units for air distribution systems. Thermal and aerodynamic performance RHE/6 BS :1978 Methods for testing and rating induction units for air distribution systems. Acoustic testing and rating RHE/6 BS 5077:1974 Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507 GME/24 BS 5078:1974 Specification for jig and fixture components MTE/18 BS 5106:1988 Specification for dimensions of spiral antiextrusion back-up rings and their housings MCE/11 BS 5138:1974 Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts MCE/14 BS 5139:1991 Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion PRI/82 BS :1975 Specification for air heating and cooling coils. Method of testing for rating of cooling coils RHE/6 BS :1977 Specification for air heating and cooling coils. Method of testing for rating of heating coils RHE/6 BS 5186:1975 Specification for shaft centre heights MCE/5 BS 5208:1975 Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines MCE/14 BS :1989 Copy preparation and proof correction. Specification for marks for mathematical copy preparation and mathematical proof correction and their uses PAI/43 BS 5350-G2:1987 Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives PRI/52 BS :1987 Low-voltage controlgear. Specification for semiconductor contactors (solid state contactors) PEL/17/2 BS :1977 Specification for bidets. Vitreous china bidets over rim supply only. Quality, workmanship and functional dimensions other than connecting dimensions. B/503 BS :1977 Specification for wash basins. Wash basins (one or three tap holes). Materials, quality, design and construction B/503 BS 5520:1977 Specification for vitreous china bowl urinals (rimless type) B/503 BS :1987 Fertilizers. Chemical analysis. Determination of phosphorus. Extraction of phosphates soluble in mineral acids CII/37 BS :1987 Fertilizers. Chemical analysis. Determination of phosphorus. Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method) CII/37 BS 5564:1978 Specification for high-voltage fuses for the external protection of shunt power capacitors PEL/32 BS 5597:1991 Specification for non-refillable plastics aerosol dispensers up to 1000 ml capacity PKW/0/-/10 BS 5609:1986 Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material PKW/0 BS 5627:1984 Specification for plastics connectors for use with horizontal outlet vitreous china WC pans B/503 BS 5740:1989 Specification for oblong flat-top cans for liquid products PKW/0 BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam PRI/26 Update Standards December 2012 Prices may be subject to change. 27

28 British Standards Reviewed and Confirmed continued... BS :1984 Electrical relays. Specification for the basic modules for the dimensions of general purpose all-or-nothing relays PEL/95 BS 6106:1981 Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk PKW/0/-/7 BS :1981 Code of practice for the selection and application of bellows expansion joints for use in pressure systems. Metallic bellows expansion joints PSE/14 BS :1993 Hose and hose assemblies for asphalt and bitumen. Specification for flexible metallic hose and hose assemblies GSE/42 BS :1999 Lead-acid stationary cells and batteries. Specification for the high-performance Plante positive type PEL/21 BS :1999 Lead-acid stationary cells and batteries. Specification for the flat positive plate type PEL/21 BS :1994 Connectors for analogue telecommunication interfaces. Specification for plugs TCT/2 BS :1994 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS Specification for sockets. General requirements TCT/2 BS :1997 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS TCT/2 BS :1983 Shower units. Guide on choice of shower units and their components for use in private dwellings B/503 BS :1983 Shower units. Specification for the installation of shower units B/503 BS :1984 Shower units. Specification for shower heads and related equipment B/503 BS :1983 Cage pallets for retail use. Specification for collapsible cage pallets rated at 300 kg PKW/0/-/11 BS :1984 Cage pallets for retail use. Guide to the safe handling and use of collapsible cage pallets rated at 300 kg PKW/0/-/11 BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers. Specification PKW/0/-/8 BS 6583:1985 Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating) RHE/6 BS 6652:1985 Specification for packagings resistant to opening by children PKW/0/3 BS 6720:1986 Specification for marking transit information on packages for distribution PKW/0 BS :1988 Code of practice for low temperature hot water heating systems of output greater than 45 kw. Fundamental and design considerations RHE/2 BS :1988 Code of practice for low temperature hot water heating systems of output greater than 45 kw. Selection of equipment RHE/2 BS :1988 Code of practice for low temperature hot water heating systems of output greater than 45 kw. Installation, commissioning and maintenance RHE/2 BS 6884:1987 Recommendations for plan dimensions of unit loads PKW/0 BS 6885:1988 Specification for miniature cartridge fuse links for use on printed wiring boards PEL/32 BS 6946:1988 Specification for metal channel cable support systems for electrical installations BS :1988 Creasing properties of carton board. Method for determination of crease recovery (spring back) of 90º fold PKW/0/-/9 BS 7028:1999 Eye protection for industrial and other uses. Guidance on selection, use and maintenance PH/2 BS 7116:1990 Specification for double sided pressure sensitive adhesive tapes PKW/0 BS :1994 Chemical tests for raw and vulcanized rubber. Determination of chlorine content. Parr bomb method PRI/23 BS 7289:1990 Specification for dimensions of three-piece tinplate aerosol cans PKW/0 BS 7357:1990 Specification for 7.5 L WC flushing cisterns B/503 BS 7379:1991 Specification for plastics/metal laminate collapsible tubes PKW/0/-/8 BS 7420:1991 Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions) RHE/31 BS 7539:1992 Methods for test for determination of properties of cushioning materials for package design purposes PKW/0 BS 7611:1992 Specification for potato storage boxes for mechanical handling PKW/0/-/11 BS 7656:1993 Specification for low-voltage pole-mounting fuses (cut-outs). 315 A rating PEL/17/2 28 Update Standards December 2012 Prices may be subject to change.

29 BS :1995 Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in agricultural slurry tanks STI/36 BS 7818:1995 Specification for pedestrian restraint systems in metal B/509/1 BS 7921:1998 Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification PKW/0/-/8 BS 7962:2000 Black materials for masking existing road markings. Specification B/509/2 BS 7982:2001 Guidance on the environmental impact of large-scale fires involving plastics materials PRI/26 BS 7983:2001 Requirements for payphones for networks other than the ISDN TCT/2 BS 7991:2001 Determination of the mode I adhesive fracture energy, G IC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens PRI/52 BS ISO 12128:2001 Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes MCE/12 PD 6457:1970 Guide to the application of addendum modification to involute spur and helical gears MCE/5 BS C 15:1960 Specification for coupling dimensions for aircraft-to-tractor tow bar connections ACE/57 BS 2G 127:1967 Specification for power and current transformers for use in aircraft electrical power supply systems BS 2G 132:1981 Specification for general requirements for electromagnetically operated contactors for aircraft BS G 175:1959 Aircraft fuel nozzle grounding plugs and sockets BS 5G 178-1:1993 Crimped joints for aircraft electrical cables and wires. Specification for design requirements (including tests) for components and tools BS 4G 178-2:1986 Crimped joints for aircraft electrical cables and wires. Specification for control of crimping (including user control tests) BS 2G 180:1974 Specification for permanent splicing of aircraft electrical cables BS G 193:1966 Specification for aircraft lampholders BS 2G 196:1971 Specification for static invertors BS 3G 197:1982 Specification for stud-type terminal blocks for terminations on aircraft electric cables BS 4G 198-1:1997 Sleeves for aircraft electric cables and equipment wires. Specification for elastomeric sleeves for binding and identification BS 3G 198-2:1997 Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes BS 3G 198-4:1996 Sleeves for aircraft electric cables and equipment wires. Specification for fluoropolymer heat shrinkable sleeving for binding and insulation BS G 198-5:1997 Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat shrinkable moulded shapes BS 2G 201:1996 Specification for counter and pointer pressure altimeters BS 2G 202:1988 Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications BS G 207:1969 Specification for aircraft electrical circuit diagrams BS G 209:1970 Specification for transformer rectifier units BS 3G 210:1996 Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190ºC) or nickel plated copper conductors (260ºC) BS G 212:1971 Specification for general requirements for aircraft electrical cables BS G 217:1975 Specification for general requirements for cockpit lighting controllers BS G 222:1976 Specification for Efglas type electric cables (metric units) BS 2G 223:1989 Specification for screen terminating devices for aircraft electric cables BS 2G 232:1987 Specification for electric cables for general airframe or equipment interconnect use (135ºC), wrapped insulation BS 3G 233:1990 Specification for electric cables for general airframe or equipment interconnect use (135ºC), extruded insulation BS G 235:1987 Specification for electric cables for general airframe or equipment interconnect use (150ºC), wrapped insulation with silver plated conductors Update Standards December 2012 Prices may be subject to change. 29

30 British Standards Reviewed and Confirmed continued... BS G 236:1987 Specification for electric cables for general airframe or equipment interconnect use (200ºC), wrapped insulation with nickel plated conductors BS G 237:1987 Specification for electric cables for general airframe or equipment interconnect use (200ºC), extruded insulation with nickel plated conductors BS 2G 238:1996 Specification for electric cables for general airframe or equipment interconnect use (260ºC), nickel plated copper and copper alloy conductors, with wrapped insulation BS G 241:1988 Specification for fire proof electric cables for engine fire zone and airframe use BS G 242:1989 Specification for data bus interconnecting systems BS G 243:1990 Specification for igniter cables for engine use (4 kv d.c.) BS G 244:1989 Code of practice for installation/repair of aircraft electrical interconnection systems BS G 247-1:1992 Locator lights for airborne applications. Specification for lifejacket lights BS G 247-2:1995 Locator lights for airborne applications. Specification for liferaft lights BS L 164:1978 Specification for sheet and strip of aluminiumcoated aluminium-copper-magnesium-siliconmanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) 1/-/24 BS L 165:1978 Specification for sheet and strip of aluminiumcoated aluminium-copper-magnesium-siliconmanganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) 1/-/24 BS 3N 3:2000 Breathing oxygen for airborne applications ACE/1 BS N 6:1998 Specification for aeromedical portable oxygen concentrator systems. General requirements ACE/1 BS 4N 100-1:1999 Aircraft oxygen systems and equipment. Design and installation ACE/1 BS 4N 100-2:1999 Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen ACE/1 BS 4N 100-3:1999 Aircraft oxygen systems and equipment. Testing of equipment and systems ACE/1 BS 4N 100-4:1999 Aircraft oxygen systems and equipment. Guide to the physiological factors ACE/1 BS 4N 100-6:1999 Aircraft oxygen systems and equipment. Guidance and recommendations on the selection of materials for use with oxygen ACE/1 BS 5N 100-7:2002 Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging ACE/1 BS 7S 80:2002 High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm) 1/-/15 BS 2S 136:1977 Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm) 1/-/15 BS 2S 140:1976 Specification for 2 1 2% nickel-chromiummolybdenum steel billets, bars, forgings and parts ( MPa: limiting ruling section 150 mm) 1/-/15 BS S 150:1975 Specification for chromium-molybdenumvanadium-niobium heat-resisting steel billets, bars, forgings and parts ( MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3) 1/-/15 BS S 151:1975 Specification for chromium-nickel-molybdenumvanadium heat-resisting steel billets, bars, forgings and parts ( MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3) 1/-/15 BS S 152:1975 Specification for chromium-cobaltmolybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) ( MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3) 1/-/15 BS S 162:1990 Specification for 18% nickel-cobaltmolybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted) 1/-/15 BS S 164:2002 1% Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding) 1/-/15 BS S 206:1999 Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs 1/-/15 BS 2S 513:1970 Specification for spring steel strip 1/-/15 BS S 532:1969 Specification for chromium-nickel-coppermolybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa) 1/-/15 BS S 533:1969 Specification for chromium-nickel-coppermolybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa) 1/-/15 BS S 534:1969 Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding) 1/-/15 BS S 535:1969 Specification for chromium-molybdenum steel sheet and strip (1150/1300 MPa) (suitable for welding) 1/-/15 30 Update Standards December 2012 Prices may be subject to change.

31 BS S 538:1975 Specification for chromium-nickel-molybdenumvanadium heat-resisting steel sheet and strip ( MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3) 1/-/15 BS 3T 53:1980 Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) 1/-/15 BS 3T 60:1980 Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm) 1/-/15 BS 2T 66:1980 Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) 1/-/15 BS 2T 68:1980 Specification for cold drawn 18/10 chromiumnickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) 1/-/15 BS T 72-T 73:1977 Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa) 1/-/15 BS HC 7:1974 Specification for 3% chromium-molybdenum steel castings ( MPa) 1/-/15 BS HC 10:1974 Specification for nickel-chromium-molybdenum steel castings ( MPa) 1/-/15 BS HC 103:1974 Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3) 1/-/15 BS HC 106:1974 Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings ( MPa) (Cr 16, Ni 4, Cu 3) 1/-/15 BS MA 5:1970 Specification for brass service nameplates for valves SME/32 BS MA 47:1977 Code of practice for ships cargo blocks MHE/3/6 BS MA 48:1976 Code of practice for design and operation of ships derrick rigs MHE/3/6 BS MA 57:1975 Specification for ships deck machinery rope storage reels SME/32 BS AU 193a:1990 Specification for replacement motor cycle and moped exhaust systems AUE/9 BS AU 237a:1993 Specification for light domestic duty jumper lead sets for automotive starting AUE/9 BS AU 258:1995 Specification for elasticated straps AUE/9 BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 638-4:1996 Arc welding power sources, equipment and accessories. Specification for welding cables WEE/6 Superseded by BS EN :2011 and BS EN :2011 BS 1739:1982 (ISO 6556:1981) Specification for filter flasks LBI/36 Superseded by BS EN ISO 6556:2012 BS 5692:1979 (IEC 60294:1969) Method for measurement of the dimensions of a cylindrical electronic component having two axial terminations EPL/47 Superseded by BS EN 60294:2012 BS 5693:1978 (IEC 60301:1971) Recommendations for preferred diameters of wire terminations of capacitors and resistors EPL/40X Superseded by BS EN 60301:2012 BS 6004:2000 Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring GEL/20/17 Superseded by BS 6004:2012, BS EN :2011, BS EN :2011 and BS EN :2011 BS 6007:2006 Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring GEL/20 Superseded by BS EN :2011, BS EN :2011 and BS EN :2011 BS 6500:2000 Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments GEL/20/17 Superseded by BS EN :2011, BS EN :2011, BS EN :2011, BS EN :2011 and BS EN :2011 BS 6837:1987 (ISO 3394:1984) Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads PKW/0 Superseded by BS ISO 3394:2012 BS 7211:1998 Electric cables. Thermosetting insulated, nonarmoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire GEL/20/17 Superseded by BS 7211:2012, BS EN :2011 and BS EN :2011 BS :1997 (ISO 6474:1994) Non-metallic materials for surgical implants. Specification for ceramic materials based on high purity alumina CH/150 Superseded by BS ISO :2010 and BS ISO :2012 BS :1991 (ISO :1985) Full-flow lubricating oil filters for internal combustion engines. Method of test for static burst pressure MCE/21 Superseded by BS ISO :2012 Update Standards December 2012 Prices may be subject to change. 31

32 British Standards Withdrawn continued... BS :1992 (ISO :1992) Metallic multilayer plain bearings. Method for non-destructive ultrasonic testing of bond MCE/12 Superseded by BS ISO :2012 BS :1992 (ISO :1982) Metallic multilayer plain bearings. Method for destructive testing of bond for bearing metal layer thickness 2 mm MCE/12 Superseded by BS ISO :2012 BS 7641:1993 (ISO 9836:1992) Performance standards in building. Definition and calculation of area and space indicators B/500 Superseded by BS EN :2011 and BS ISO 9836:2011 BS :1995 (IEC :1991) Guide for determining the effects of ionizing radiation on insulating materials. Procedures for irradiation and test GEL/15 Superseded by BS EN :2012 BS 7919:2001 Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments GEL/20/17 Superseded by BS 6004:2012, BS EN :2011, BS EN :2011, BS EN :2011, BS EN :2011, BS EN :2011 and BS EN :2011 BS 8901:2009 Specification for a sustainability management system for events SDS/1/-/2 Superseded by BS ISO 20121:2012 DD CEN/TS 764-6:2004 Pressure equipment. Structure and content of operating instructions PVE/1 Superseded by PD CEN/TR 764-6:2012 BS EN 1975:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre PVE/3/3 Superseded by BS EN ISO 7866:2012 BS EN ISO :2001 Natural gas. Determination of composition with defined uncertainty by gas chromatography Guidelines for tailored analysis PTI/15 Superseded by BS EN ISO :2012 and BS EN ISO :2012 BS EN ISO :2002 Natural gas. Determination of composition with defined uncertainty by gas chromatography Measuring-system characteristics and statistics for processing of data PTI/15 Superseded by BS EN ISO :2012 and BS EN ISO :2012 BS EN ISO :1997 Hand-held portable power tools. Measurement of vibrations at the handle. Die grinders GME/21/6 Superseded by BS EN ISO :2012 BS EN 12223:2000 Non-destructive testing. Ultrasonic examination. Specification for calibration block No. 1 WEE/46 Superseded by BS EN ISO 2400:2012 DD CEN/TS :2004 Cranes. General design. Limit states and proof of competence of steel structures MHE/3/1 Superseded by BS EN :2012 BS EN :2007 Health informatics. Electronic health record communication. Reference model IST/35 Superseded by BS EN ISO :2012 DD CEN/TS :2008 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method B/515 Superseded by PD CEN/TS :2012 DD CEN/TS 15224:2005 Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 CH/100/-/2 Superseded by BS EN 15224:2012 BS EN 25814:1992 (ISO 5814:1990) Method for determination of dissolved oxygen in water: electrochemical probe method EH/3 Superseded by BS EN ISO 5814:2012 BS EN 50366:2003+A1:2006 Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement CPL/61 Superseded by BS EN 62233:2008 BS EN :2005 Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kv a.c PEL/78 Superseded by BS EN :2005+A1:2010 BS EN :2008 Fuel cell technologies. Stationary fuel cell power systems. Installation GEL/105 Superseded by BS EN :2012 DD ISO/TS :2002 Geometrical product specifications (GPS). General concepts. Basic tenets, specifications operators and uncertainties TDW/4 Superseded by BS EN ISO :2012 BS ISO 20433:2005 Leather. Tests for colour fastness. Colour fastness to crocking TCI/69 Superseded by BS EN ISO 20433:2012 BS ISO 22664:2005 Space data and information systems. TC (telecommand) space data links protocol 8/-/7 Superseded by BS ISO 26900:2012 DD ISO/PAS 30005:2010 Ships and marine technology. Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations SME/32 Superseded by BS ISO 30005:2012 DD IEC/TS :2004 Fire hazard testing. Test flames. 500 W flames. Apparatus and confirmational test methods GEL/89 Superseded by BS EN :2012 BS 2TA 48:2009 Specification for forgings of titaniumaluminium-molybdenum-tin-silicon-carbon alloy (tensile strength MPa) (limiting ruling section 100 mm) 1 Superseded by BS EN 3351:2012 BS 2TA 51:2009 Specification for forgings of titaniumaluminium-molybdenum-tin-silicon alloy (tensile strength MPa) (limiting ruling section over 100 mm up to and including 150 mm) 1/-/49 Superseded by BS EN 3351: Update Standards December 2012 Prices may be subject to change.

33 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to by 31 January, 2013, in order to be considered by the relevant UK Committee. BS 328-6:1992 (ISO 4205:1991) Drills and reamers. Countersinks, 90º, with parallel shanks and solid pilots MTE/18 BS :1983 (ISO 6835:1981) Analysis of formulated detergents. Quantitative test methods. Method for determination of total boron content CII/34 BS :1986 (ISO 8215:1985) Analysis of formulated detergents. Quantitative test methods. Method for determination of total silica content CII/34 BS :1986 (ISO 8214:1985) Analysis of formulated detergents. Quantitative test methods. Method for determination of inorganic sulphate content CII/34 BS 4231:1992 (ISO 3448:1992) Classification for viscosity grades of industrial liquid lubricants PTI/7 BS :1993 (ISO 7973:1992) Methods of test for cereals and pulses. Determination of viscosity of flour using an amylograph AW/4 BS :1997 (ISO 1442:1997) Methods of test for meat and meat products. Determination of moisture content (reference method) AW/6 BS 4736:1985 (ISO 7771:1985) Method for determination of dimensional changes of fabrics induced by cold-water immersion TCI/82 BS :1984 (ISO 7409:1984) Fertilizers. Terminology and labelling. Specification for marking of containers (packages, drums, etc.) and labels CII/37 BS :1987 (ISO 5313:1986) Fertilizers. Physical properties. Method for determination of oil retention of high nitrogen content, straight ammonium nitrate fertilizers CII/37 BS :1979 (ISO :1977) Glossary of terms for compressors, pneumatic tools and machines. General MCE/8 BS :1990 (ISO 6698:1989) Cycles. Specifications for screw threads used to assemble freewheels on bicycle hubs GME/25 BS :1990 (ISO 6696:1989) Cycles. Specification for screw threads used in bottom bracket assemblies GME/25 BS :1991 (ISO 6699:1990) Cycles. Specification for assembly dimensions for stem and handlebar bend GME/25 BS :1991 (ISO 8562:1990) Cycles. Specification for stem wedge angle GME/25 BS :1991 (ISO 10230:1990) Cycles. Specification for mating dimensions for splined hub and sprocket GME/25 BS :1991 (ISO 6695:1991) Cycles. Specification for dimensions of bottom bracket axle and crank assembly with square end fittings GME/25 BS :1991 (ISO 6701:1991) Cycles. Specification for dimensions of spoke nipples GME/25 BS :1985 (ISO 629:1982) Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganese. Steel: spectrophotometric method ISE/102 BS 6219:1996 (ISO 5223:1995) Test sieves for cereals AW/4 BS 6585:1985 (ISO 7535:1984) Guide for comparative testing of performance of detergents for domestic machine dishwashing CII/34 BS :1987 (ISO 6844:1983) Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content CII/34 BS :1991 (ISO 6839:1982) Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water CII/34 BS :1989 (ISO 6121:1988) Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content CII/34 BS :1990 (ISO 6842:1989) Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content CII/34 BS :1989 (ISO 6843:1988) Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass CII/34 Update Standards December 2012 Prices may be subject to change. 33

34 British Standards Under Review continued... BS :1998 (ISO 7293:1997) Chain saws. Method of evaluating engine performance including fuel consumption AGE/29 BS :1988 (ISO :1987) Tolerances for building. Recommendations for selecting target size and predicting fit B/554 BS :1993 (ISO 9685:1991) Analysis of iron ores. Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method ISE/58 BS :1990 (ISO :1989) Prosthetics and orthotics. Method of describing limb deficiencies present at birth CH/168 BS :1993 (ISO :1993) Prosthetics and orthotics. Method of describing lower limb amputation stumps CH/168 BS :1993 (ISO :1993) Prosthetics and orthotics. Method of describing upper limb amputation stumps CH/168 BS :1992 (ISO :1991) Effect of dry heat on fabrics under low pressure. Method for dry heat treatment of fabrics TCI/82 BS :1991 (ISO :1991) Effect of dry heat on fabrics under low pressure. Method for determination of dimensional change in fabrics exposed to dry heat TCI/82 BS :1998 (ISO :1997) Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety devices MCE/14 BS EN ISO 105-A05:1997 Textiles. Tests for colour fastness. Instrumental assessment of change of colour for determination of grey scale rating TCI/81 BS EN ISO 105-C12:2006 Textiles. Tests for colour fastness. Colour fastness to industrial laundering TCI/81 BS EN ISO 105-J01:2000 Textiles. Tests for colour fastness. General principles for measurement of surface colour TCI/81 BS EN ISO 105-J02:2000 Textiles. Tests for colour fastness. Instrumental assessment of relative whiteness TCI/81 BS EN ISO 105-P02:2004 Textiles. Tests for colour fastness. Colour fastness to pleating. Steam pleating TCI/81 BS EN ISO 105-Z03:1998 Textiles. Tests for colour fastness. Intercompatibility of basic dyes for acrylic fibres TCI/81 BS EN ISO 105-Z05:1998 Textiles. Tests for colour fastness. Determination of the dusting behaviour of dyes TCI/81 BS EN ISO 105-Z10:1999 Textiles. Tests for colour fastness. Determination of relative colour strength of dyes in solution TCI/81 BS EN 215:2004 Thermostatic radiator valves. Requirements and test methods RHE/16 BS EN ISO :2010 Hardmetals. Rockwell hardness test (scale A). Test method ISE/65 BS EN ISO 4619:2010 Driers for paints and varnishes STI/3 BS EN ISO 4629:1998 (BS :1996) Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method STI/3 BS EN ISO 5182:2009 Resistance welding. Materials for electrodes and ancillary equipment WEE/29 BS EN ISO 6845:2003 Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content CII/34 BS EN ISO :2002 Water-cooled secondary connection cables for resistance welding. Dimensions and requirements for double-conductor connection cables WEE/29 BS EN ISO :2002 Water-cooled secondary connection cables for resistance welding. Dimensions and requirements for single-conductor connection cables WEE/29 BS EN ISO :1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for cutlery for the preparation of food CW/17 BS EN ISO :1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for stainless steel and silverplated cutlery CW/17 BS EN ISO :1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver-plated table and decorative holloware CW/17 BS EN ISO :1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for gold-plated cutlery CW/17 BS EN ISO 9261:2010 Agricultural irrigation equipment. Emitters and emitting pipe. Specification and test methods AGE/30 BS EN ISO 10248:2000 Fluid fertilizers. De-aeration of suspension samples by film disentrainment CII/37 BS EN ISO 10249:2000 Fluid fertilizers. Preliminary visual examination and preparation of samples for physical testing CII/37 34 Update Standards December 2012 Prices may be subject to change.

35 BS EN ISO :2009 Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests MCE/14 BS EN ISO :2009 Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement MCE/14 BS EN ISO 12138:1997 Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing TCI/82 BS EN ISO 15797:2004 Textiles. Industrial washing and finishing procedures for testing of workwear TCI/82 BS EN ISO 18753:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pyknometer RPI/13 BS EN ISO 19106:2006 Geographic information. Profiles IST/36 BS EN ISO 19116:2006 Geographic information. Positioning services IST/36 BS EN ISO :2006 Geographic information. Simple feature access. Common architecture IST/36 BS EN ISO :2006 Geographic information. Simple feature access. SQL option IST/36 BS EN ISO 24333:2009 Cereals and cereal products. Sampling AW/4 BS EN :1993 (ISO :1988) Hand-held portable power tools. Measurement of vibrations at the handle. General MCE/8 BS ISO 257:2004 Pesticides and other agrochemicals. Principles for the selection of common names AW/81 BS ISO 302:2004 Pulps. Determination of Kappa number PAI/11 BS ISO 491:2002 Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions CPW/36 BS ISO :1997 Aerospace. Preformed flexible steel wire rope for aircraft controls. Dimensions and loads ACE/12 BS ISO :1997 Aerospace. Preformed flexible steel wire rope for aircraft controls. Technical specification ACE/12 BS ISO :2002 Assembly tools for screws and nuts. Machineoperated screwdriver bits. Screwdriver bits for cross-recessed head screws MTE/15 BS ISO 2421:2003 Coated abrasives. Cylindrical sleeves MTE/13 BS ISO 2467:2004 Cinematography. Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints. Positions and dimensions CPW/36 BS ISO 2907:2002 Cinematography. Maximum projectable image area on 35 mm motion-picture film. Position and dimensions CPW/36 DD ISO/TS 2963:2006 Cheese and processed cheese products. Determination of citric acid content. Enzymatic method AW/5 BS ISO 3874:1997 Series 1 freight containers. Handling and securing TW/1 BS ISO :1997 Gas turbines. Procurement. General introduction and definitions MCE/16 BS ISO :1997 Gas turbines. Procurement. Standard reference conditions and ratings MCE/16 BS ISO :2004 Gas turbines. Procurement. Design requirements MCE/16 BS ISO :2002 Gas turbines. Procurement. Technical information MCE/16 BS ISO :2002 Gas turbines. Procurement. Inspection, testing, installation and commissioning MCE/16 BS ISO :2002 Hydraulic fluid power. Determination of characteristics of motors. At constant low speed and constant pressure MCE/18/-/8 BS ISO :2002 Hydraulic fluid power. Determination of characteristics of motors. Startability MCE/18/-/8 BS ISO 5057:1993 Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks MHE/7 BS ISO 5742:2004 Pliers and nippers. Nomenclature MTE/15 BS ISO 5743:2004 Pliers and nippers. General technical requirements MTE/15 BS ISO 5744:2004 Pliers and nippers. Methods of test MTE/15 BS ISO 5745:2004 Pliers and nippers. Pliers for gripping and manipulating. Dimensions and test values MTE/15 BS ISO 5746:2004 Pliers and nippers. Engineer s and Lineman s pliers. Dimensions and test values MTE/15 BS ISO 5748:2004 Pliers and nippers. End cutting nippers. Dimensions and test values MTE/15 BS ISO 5749:2004 Pliers and nippers. Diagonal cutting nippers. Dimensions and test values MTE/15 BS ISO 5758:2002 Cinematography. Labelling of containers for motion-picture film and magnetic material. Minimum information for exchange of materials CPW/36 Update Standards December 2012 Prices may be subject to change. 35

36 British Standards Under Review continued... BS ISO 6055:2004 Industrial trucks. Overhead guards. Specification and testing MHE/7 BS ISO 6104:2005 Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature MTE/13 BS ISO :2002 Lubricants, industrial oils and related products (class L). Classification. General PTI/7 BS ISO 6826:1997 Reciprocating internal combustion engines. Fire protection MCE/14/-/4 BS ISO 7764:2006 Iron ores. Preparation of predried test samples for chemical analysis ISE/58 BS ISO/IEC :2007 Identification cards. Integrated circuit cards. Cards with contacts. Dimensions and location of the contacts IST/17 DD ISO/TS 7821:2005 Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods AW/40 BS ISO :2004 Ductile iron pipes. External zinc-based coating. Metallic zinc with finishing layer PSE/10 BS ISO :1998 Prosthetics and orthotics. Limb deficiencies. Description of causal conditions leading to amputation CH/168 BS ISO 8567:2002 Cinematography. Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints. Position and dimensions CPW/36 BS ISO :2004 Textile machinery and accessories. Flat warp knitting machines. Vocabulary of basic structure and knitting elements TCI/33 BS ISO :2004 Textile machinery and accessories. Flat warp knitting machines. Vocabulary of warp let-off, fabric take-up and batching TCI/33 BS ISO :2002 Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Vocabulary of patterning devices TCI/33 BS ISO 8893:1997 Forestry machinery. Portable brush cutters and grass trimmers. Engine performance and fuel consumption AGE/29 BS ISO 8976:2004 Pliers and nippers. Multiple slip joint pliers. Dimensions and test values MTE/15 BS ISO 8979:2004 Pliers and nippers for electronics. Nomenclature MTE/15 BS ISO :2004 Abrasive grains. Determination of bulk density. Macrogrits MTE/13 BS ISO 9285:1997 Abrasive grains and crude. Chemical analysis of fused aluminium oxide MTE/13 BS ISO 9286:1997 Abrasive grains and crude. Chemical analysis of silicon carbide MTE/13 BS ISO 9343:2004 Pliers and nippers. Slip joint pliers. Dimensions and test values MTE/15 BS ISO 9349:2004 Preinsulated ductile iron pipeline systems PSE/10 BS ISO 9512:2002 Cigarettes. Determination of ventilation. Definitions and measurement principles AW/40 BS ISO 9654:2004 Pliers and nippers for electronics. Single purpose nippers. Cutting nippers MTE/15 BS ISO 9655:2004 Pliers and nippers for electronics. Singlepurpose nippers. Pliers for gripping and manipulating MTE/15 BS ISO 9656:2004 Pliers and nippers for electronics. Test methods MTE/15 BS ISO 9657:2004 Pliers and nippers for electronics. General technical requirements MTE/15 BS ISO 10185:2004 Tobacco and tobacco products. Vocabulary AW/40 BS ISO :2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm PRI/88 BS ISO :2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm PRI/88 BS ISO :2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm PRI/88 BS ISO 10914:1996 Assembly tools for screws and nuts. Sockets and wrenches for spline drive MTE/15 BS ISO 11168:1995 Socket wrenches for spark and glow plugs MTE/15 BS ISO 11599:1997 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste NCE/9 BS ISO 12256:2002 Aerospace. Drives, internal, cruciform, ribbed. Metric series ACE/12 BS ISO :2004 (BS :2004) Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Sound intensity method MCE/17 BS ISO :2002 Petroleum products. Determination of the filterability of lubricating oils. Procedure for oils in the presence of water MCE/18/-/16 36 Update Standards December 2012 Prices may be subject to change.

37 BS ISO :2004 Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Validation of timing devices MCE/22 BS ISO 14277:2002 Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series ACE/12 BS ISO 14278:2002 Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series ACE/12 BS ISO 14279:2002 Aerospace. Drives, internal, cruciform. Metric series ACE/12 BS ISO 14280:2002 Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series ACE/12 BS ISO 14281:2002 Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series ACE/12 BS ISO 14943:2004 Nuclear energy. Nuclear fuel technology. Administrative criteria related to criticality safety NCE/9 BS ISO :2002 Holding fixtures of cylindrical abrasive sleeves. Holding fixtures with shank for hand-held grinding machines MTE/13 BS ISO :2002 Holding fixtures of cylindrical abrasive sleeves. Holding fixtures for stationary machines MTE/13 BS ISO/IEC :2007 Information technology. Business operational view. Business transaction scenarios. Accounting and economic ontology IST/40 BS ISO 16002:2004 Stored cereal grains and pulses. Guidance on the detection of infestation by live invertebrates by trapping AW/4 DD CEN ISO/TS :2009 Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Cereals, pulses and milled cereal products AW/4 BS ISO 17266:2002 Cinematography. Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives. Position and width dimensions CPW/36 BS ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds PRI/88/4 BS ISO :2004 Clamping flanges for superabrasive cutting-off wheels. Natural stone. Natural stone MTE/13 BS ISO :2004 Clamping flanges for superabrasive cutting-off wheels. Building and construction MTE/13 BS ISO 21538:2004 Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering MTE/13 BS ISO 22168:2006 Road vehicles. Holding test of coatings influencing the colour of light emitted by light sources). Test methods AUE/1 BS ISO 22866:2005 Equipment for crop protection. Methods for field measurement of spray drift AGE/15 DD ISO/TS 27105:2009 Milk and milk products. Determination of hen s egg white lysozyme by HPLC AW/5 DD ISO/TS 27106:2009 Cheese. Determination of nisin A content by LC- MS and LC-MS-MS AW/5 BS A 316:1997 (ISO 4147:1997) Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications. 600 MPa (at ambient temperature)/120ºc, 600 MPa (at ambient temperature)/235ºc, 900 MPa (at ambient temperature)/425ºc, 1100 MPa (at ambient temperature)/235ºc, 1100 MPa (at ambient temperature)/315ºc, 1100 MPa (at ambient temperature)/650ºc, 1210 MPa (at ambient temperature)/730ºc, 1250 MPa (at ambient temperature)/235ºc and 1550 MPa (at ambient temperature)/600ºc. Dimensions ACE/12 BS A 318:1997 (ISO 10096:1997) Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications. 450 MPa (at ambient temperature)/425ºc, 600 MPa (at ambient temperature)/235ºc, 600 MPa (at ambient temperature)/315ºc, 600 MPa (at ambient temperature)/650ºc, 900 MPa (at ambient temperature)/235ºc, 900 MPa (at ambient temperature)/730ºc and 1100 MPa (at ambient temperature)/600ºc. Dimensions ACE/12 BS A 319:1997 (ISO 12268:1997) Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425ºc, 600 MPa (at ambient temperature)/235ºc, 600 MPa (at ambient temperature)/315ºc, 600 MPa (at ambient temperature)/650ºc, 900 MPa (at ambient temperature)/235ºc, 900 MPa (at ambient temperature)/730ºc and 1100 MPa (at ambient temperature)/600ºc. Dimensions ACE/12 BS A 321:1997 (ISO 12274:1997) Nuts, anchor, self-locking, floating, selfaligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235ºc, 900 MPa (at ambient temperature)/315ºc and 900 MPa (at ambient temperature)/425ºc. Dimensions ACE/12 BS A 322:1998 (ISO 3202:1997) Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions ACE/12 BS 2C 11:1988 (ISO 11:1987) Specification for ground pressure test connections for aircraft pressure cabins 9 Update Standards December 2012 Prices may be subject to change. 37

38 British Standards Under Review continued... BS 5M 23:1987 (ISO 12:1987) Specification for an identification scheme for pipelines 9 BS 2M 49:1997 (ISO 3323:1987) Aircraft. Hydraulic components. Marking to indicate fluid for which component is approved 9 BS 2M 59:1993 (ISO 7319:1992) Specification for interface of metric couplings, 24º cone, for aerospace fluid systems 9 BS 2M 63:1993 (ISO 7320:1992) Specification for dimensions of aerospace fluid system port connection, seal and fitting end 9 BS AU 169a:1992 (ISO 3795:1989) Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry AUE/15 BS AU 188:1983 (ISO 5422:1982) Specification for anchorages for towing ropes, cables or bars for road vehicles AUE/15 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 2 SP 68-71:1973/A1 Specification for 100º countersunk precision head aluminium and aluminium alloy rivets ACE/12 BS 2 SP 77-80:1973/A4 Specification for snap head aluminium and aluminium alloy rivets ACE/12 BS 2 SP 81-82:1973/A3 Specification for snap head high nickel-copper alloy rivets ACE/12 BS 2 SP 83-85:1973/A3 Specification for mushroom head aluminium alloy rivets ACE/12 BS 2 SP 87-88:1973/A1 Specification for 100º countersunk head high nickel-copper alloy rivets ACE/12 BS 2 SP 91-92:1973/A4 Specification for carbon steel worm drive clamps for aircraft ACE/12 BS 4551:2005+A1:2010/A2 Mortar. Methods of test for mortar. Chemical analysis and physical testing B/519/2 BS 6387 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions will supersede BS 6387:1994 GEL/20/18 BS 8487:2007/A1 The design and construction of gas boosters used in association with combustion equipment. Specification GSE/33 BS Crisis management. Guidance and good practice SSM/1 BS 2A 204:1963/A2 Specifications for machine screws and nuts (unified threads) below 1/4 inch for aeronautical purposes ACE/12 BS T 78:1997/A1 Specification for 2 1 2% nickel-chromiummolybdenum steel tubes (1390 MPa) 1/-/15 BS T 79:1997/A1 Specification for 2 1 2% nickel-chromiummolybdenum steel tubes (1160 MPa) 1/-/15 BS T 80:1997/A1 Specification for 12% chromium corrosionresisting steel tubes (770 MPa) 1/-/15 BS SP :1973/A3 Specification for solid rivets with 100º countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials ACE/12 PAS 68 Impact test specifications for vehicle security barriers will supersede PAS 68:2010 PAS 109 Specification for the production of recycled gypsum from waste plasterboard will supersede PAS 109:2008 PAS 3000 Specification for reconditioned automotive engines. Security systems EN Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical beam will supersede BS EN 54-12:2002 FSH/12/2 EN Fire detection and fire alarm systems. Aspirating smoke detectors will supersede BS EN 54-20:2006 FSH/12 BS Code of practice for design and installation of external timber cladding B/543 EN Fire detection and fire alarm system. Resettable line type heat detectors FSH/12 38 Update Standards December 2012 Prices may be subject to change.

39 EN Fire detection and fire alarm systems. Point fire detectors using carbon monoxide sensors FSH/12 EN WI LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Reconditioning requirements PVE/19 EN WI Non-destructive Testing. Evaluation of vision acuity of NDT personnel WEE/46 CEN/TS WI LPG equipment and accessories. Terminology PVE/19 EN 179 Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods will supersede BS EN 179:2008 B/538 EN Sterilization of medical devices. Requirements for medical devices to be designated STERILE. Requirements for aseptically processed medical devices will supersede BS EN 556-2:2003 CH/198 EN Pressure equipment. Terminology. Pressure, temperature, volume, nominal size will supersede BS EN 764-1:2004 PVE/1 EN Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification will supersede BS EN 927-2:2006 STI/28 EN 1125 Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods will supersede BS EN 1125:2008 B/538 EN ISO Anaesthetic and respiratory equipment. Tracheostomy tubes. Tubes and connectors for use in adults will supersede BS EN ISO :2009 CH/121/5 EN ISO 9017 Destructive tests on welds in metallic materials. Fracture test WEE/46 EN ISO 9151 Protective clothing against heat and flame. Determination of heat transmission on exposure to flame PH/3/2 EN ISO Qualification test of welders. Fusion welding. Steels will supersede BS EN 287-1:2011 WEE/-/1 EN ISO Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts will supersede BS ISO 10579:2010 TDW/4 EN ISO Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels WEE/46 EN ISO Non-destructive testing of welds. Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels WEE/46 EN Fixed firefighting systems. Components for sprinkler and water spray systems. Deluge valve assembly FSH/25 EN Fixed firefighting systems. Components for sprinkler and water spray systems. Sprinkler pumps FSH/25 EN Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Performance requirements and classification will supersede BS EN :2003 B/538 EN Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Linear compression force test methods will supersede BS EN :2003 B/538 EN Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Deflection recovery test method will supersede BS EN :2003 B/538 EN Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method will supersede BS EN :2003 B/538 EN Bitumen and bituminous binders. Preparation of test samples. will supersede BS EN 12594:2007 B/510/19 EN Building hardware. Requirements and test methods for windows and doors height windows. Variable geometry stay hinges (with or without a friction stay) will supersede BS EN :2008 B/538 CEN/TS Public transport. Road vehicle scheduling and control systems. Physical layer for IP communication EPL/278 EN Child use and care articles. Baby carriers. Soft carrier will supersede BS EN :2005 CW/1/5 EN :2009/A1 Unfired pressure vessels. General PVE/1 EN :2009/A1 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron PVE/1 CEN/TR Unfired pressure vessels. Conformance of the EN series to ISO will supersede PD CEN/TR :2011 PVE/1 Update Standards December 2012 Prices may be subject to change. 39

40 New Work Started continued... EN Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test will supersede BS EN 13588:2008, BS :2008 B/510/19 EN Bitumen and bituminous binders. Determination of tensile properties of modified bitumen by the force ductility method will supersede BS EN 13589:2008, BS :2008 B/510/19 EN ISO :2008/A1 Safety of machinery. Safety-related parts of control systems. General principles for design MCE/3 CEN ISO/TS Health informatics. Detailed clinical models, characteristics and processes IST/35 EN Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method will supersede BS EN 14078:2009, BS :2009 PTI/15 EN Gas loaded accumulators for fluid power applications will supersede BS EN 14359:2006+A1:2010 MCE/18/-/1 CEN/TR Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery will supersede PD CEN/TR 15350:2006 GME/21 EN Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements MCE/3/5 EN ISO Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels WEE/46 EN Foodstuffs. Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization will supersede DD CEN/TS 16187:2011 AW/275 EN ISO Building automation and control systems. BACS contribution on the energy efficiency of buildings RHE/16 CEN/TR Investigation on a European standardization roadmap on future unleaded petrol PTI/15 EN Conservation of cultural heritage. Guidelines to characterize natural stone used in cultural heritage B/560 EN Mobile yarders for timber logging. Safety AGE/6 EN Test method to characterize the walking noise of resilient floor coverings PRI/3/60 EN GC/MS method for the identification and assay of 12 phthalates in ready to inject cosmetic samples CW/217 EN Tanks for transport of dangerous goods. Service equipment for tanks. Flame arresters for venting systems AUE/18 EN Determination of protective material resistance to permeation by chemicals. Permeation by liquid chemical under conditions of continuous contact PH/3 EN ISO Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds WEE/46 EN ISO Soil quality. Sampling of soil invertebrates. Guidance for the design of sampling programmes with soil invertebrates EH/4 CEN/TR Intelligent transport systems. Interoperable fare management system. Supplementary concepts to Part 1 for business practices EPL/278 EN :2002/A1 Quartz crystal units of assessed quality. Generic specification EPL/49 EN :2007/A1 Quartz crystal controlled oscillators of assessed quality. Generic specification EPL/49 EN Thyristor valves for high voltage direct current (HVDC) power transmission. Electrical testing will supersede BS EN :1998+A2:2008 PEL/22 EN Self-ballasted fluorescent lamps for general lighting services. Safety requirements will supersede BS EN 60968:2000 CPL/34/1 EN Quality guide for IEC compliant database content GEL/3 EN Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for power distribution in public networks will supersede BS EN :2011 PEL/17/3 EN Electrical safety in low voltage distribution systems up to 1000 v a.c. and 1500 v d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for it systems will supersede BS EN :2007 PEL/85 EN Electrical safety in low voltage distribution systems up to 1000 v a.c. and 1500 v d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for insulation fault location in it systems will supersede BS EN :2009 PEL/85 EN 61803:1999+A1:2010/A2 Determination of power losses in high-voltage direct current (HVDC) converter stations PEL/22 40 Update Standards December 2012 Prices may be subject to change.

41 EN Function blocks (FB) for process control and Electronic device description language (EDDL). EDD interpretation will supersede PD CLC/TR :2007 AMT/7 EN Electrical insulation systems. Thermal evaluation of modifications to an established EIS. Wirewound winding EIS will supersede BS EN 61858:2008 GEL/112 EN Electrical insulation systems. Thermal evaluation of modifications to an established EIS. Formwound EIS will supersede BS EN 61858:2008 GEL/112 EN :2010/A1 Power installations exceeding 1 kv a.c.. Common rules PEL/99 EN 61975:2010/A1 High-voltage direct current (HVDC) installations. System tests PEL/22 EN Grid connected PV systems. Minimum requirements for system documentation, commissioning tests and inspection will supersede BS EN 62446:2009 GEL/82 EN 62560:2012/A1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications CPL/34/1 CEN/TS Specification of concentrator cell description GEL/82 EN Protection profiles for signature creation and verification application. Introduction to the European Norm IST/17 EN Protection profiles for signature creation and verification application. Signature creation application. Core PP IST/17 EN Protection profiles for signature creation and verification application. Signature creation application. Possible extensions IST/17 EN Protection profiles for signature creation and verification application. Signature verification application. Core PP IST/17 EN Protection profiles for signature creation and verification application. Signature verification application. Possible extensions IST/17 ISO Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys. Planning of the corrosion protection system and component design considerations will partially supersede BS EN ISO 2063:2005 STI/40 ISO Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys. Conditions for execution of corrosion protection works by thermal spray processes will partially supersede BS EN ISO 2063:2005 STI/40 ISO 3537 Road vehicles. Safety glazing materials. Mechanical tests AUE/10 ISO Size designation of clothes. Primary and secondary measurements TCI/66 ISO Plastics collapsible containers for human blood and blood components. Aphaeresis blood bag systems with integrated features CH/212 ISO Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series with bores from 250 mm to 500 mm will supersede BS ISO :1994 MCE/18/-/3 ISO 6103 Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing will supersede BS EN ISO 6103:2005 MTE/13 ISO Thermoplastics pipes. Determination of tensile properties. General test method will supersede BS EN ISO :2001 PRI/88/4 ISO Thermoplastics pipes. Determination of tensile properties. Polyolefin pipes PRI/88/4 ISO Safety of toys. Fingerpaints. Requirements and test methods CW/15 ISO 8132 Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Mounting dimensions for accessories will supersede BS ISO 8132:2006 MCE/18/-/3 ISO 8133 Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Mounting dimensions for accessories will supersede BS ISO 8133:2006 MCE/18/-/3 ISO 9001 Quality management systems. Requirements. test will supersede BS EN ISO 9001:2008 QS/1/-/2 ISO 9967 Thermoplastics pipes. Determination of creep ratio will supersede BS EN ISO 9967:2007 PRI/88/4 ISO 9969 Thermoplastics pipes. Determination of ring stiffness will supersede BS EN ISO 9969:2007 PRI/88/4 ISO Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules will supersede BS :1996 CII/24 ISO Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for single-vision and multifocal lens blanks will supersede BS EN ISO :2006 CH/172/3 ISO Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for progressive power lens blanks will supersede BS EN ISO :2006 CH/172/3 Update Standards December 2012 Prices may be subject to change. 41

42 New Work Started continued... ISO Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series will supersede BS ISO 10762:1997 MCE/18/-/3 ISO Prefilled syringes. Glass barrels for injectables and ready-to-use prefillable syringes will supersede BS ISO :2007 CH/212 ISO Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges will supersede BS EN ISO :2000 CPW/172 ISO Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range will supersede BS EN ISO :2000 CPW/172 ISO Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology will supersede BS ISO :2005+A1:2008 AUE/16 ISO Pen-injectors for medical use. Requirements and test methods for electronic and electromechanical pen-injectors will supersede BS EN ISO :2007 CH/84 ISO/PAS Acoustics. Method for measuring the influence of road surfaces on traffic noise. The statistical pass-by method using a backing board EH/1/2 ISO Connections for general use and fluid power. Ports and stud ends with ISO 263 UN and UNF threads and O-ring sealing. Ports with truncated housing for O-ring seal MCE/18/-/4 ISO Connections for general use and fluid power. Ports and stud ends with ISO 263 inch threads and O-ring sealing. Heavy-duty (S series) stud ends MCE/18/-/4 ISO Connections for general use and fluid power. Ports and stud ends with ISO 263 inch threads and O-ring sealing. Light-duty (L series) stud ends MCE/18/-/4 ISO Connections for fluid power and general use. Ports and stud ends with ISO 263 threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs MCE/18/-/4 ISO Interior air of road vehicles. Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials. Small chamber method EH/2/3 ISO Interior air of road vehicles. Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements EH/2/3 ISO Physical and mechanical properties of wood. Test methods for small clear specimen. Testing in compression perpendicular to grain B/543 ISO Physical and mechanical properties of wood. Test methods for small clear specimen. Determination of impact bending strength B/543 ISO Physical and mechanical properties of wood. Test methods for small clear specimen. Determination of static hardness B/543 ISO Physical and mechanical properties of wood. Test methods for small clear specimen. Determination of radial and tangential shrinkage B/543 ISO Physical and mechanical properties of wood. Test methods for small clear specimen. Determination of compression parallel to grain B/543 ISO Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting EH/3 ISO Condition monitoring and diagnostics of machines. Prognostics. General guidelines will supersede BS ISO :2004 GME/21/7 ISO Optics and optical instruments. Vocabulary for telescopic systems. Terms for telescopic sights CPW/172 ISO Optics and optical instruments. Specifications for telescopic sights. General-purpose instruments will supersede BS ISO :2003 CPW/172 ISO Optics and optical instruments. Specifications for telescopic sights. High-performance instruments will supersede BS ISO :2003 CPW/172 ISO/IEC :2010/A6 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface will supersede BS ISO/IEC :2010+A2:2012 IST/17 ISO Optics and optical instruments. Test methods for telescopic systems. Test methods for telescopic sights will supersede BS ISO :2004 CPW/172 ISO Optics and optical instruments. Test methods for telescopic systems. Test methods for transmittance will supersede BS ISO :2005 CPW/172 ISO/IEC :2009/A4 Information technology. Coding of audio-visual objects. Audio IST/37 ISO Pneumatic fluid power. Push-in connectors for thermoplastic tubes will supersede BS ISO 14743:2004 MCE/18 ISO/TR Information and documentation. Statistics and quality issues for web archiving IDT/2/15 42 Update Standards December 2012 Prices may be subject to change.

43 ISO Ships and marine technology. Pressure/vacuum valves for cargo tanks will supersede BS ISO 15364:2007 SME/32/-/3 ISO Automation systems and integration. Integration of advanced process control and optimization for manufacturing systems. Framework and functional model AMT/5 ISO Earth-moving machinery. Lifting and tyingdown attachment points. Performance requirements B/513/1 ISO Indoor air. Detection and enumeration of moulds. Determination of total spore count EH/2/3 ISO Guidelines on technical definitions and criteria for natural & organic cosmetic ingredients and products CW/217 ISO/IEC Information technology. Application management. Requirements for application management IST/15 ISO Ergonomics of the thermal environment. Mathematical model for predicting and evaluating the dynamic human physiological responses to the thermal environments PH/9/-/1 ISO Wood-based panels. Particleboard B/541 ISO Wood-based panels. Dry-process fibreboard B/541 ISO Health informatics. Public key infrastructure. Certificate profile will supersede BS ISO :2008 IST/35 ISO/TR Intelligent transport systems. Terms, definitions and guidelines for Cooperative ITS standards documents. Terms, definitions and outline guidance for standards documents EPL/278 ISO Petroleum and natural gas industries. Offshore production installations. Guidelines on tools and techniques for hazard identification and risk assessment will supersede BS EN ISO 17776:2002 PSE/17/-/6 ISO Optics and photonics. Holography. Methods of measuring diffraction efficiency and associated optical characteristics of holograms CPW/172 ISO Optics and photonics. Holography. Methods for measurement of hologram recording characteristics CPW/172 ISO/TS Optics and photonics. Measuring method of semiconductor lasers for sensing CPW/172 ISO/TS Health Informatics. Categorial structures for representation of herbal medicaments in terminological systems IST/35 ISO Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modolus by the resonance method CII/24 ISO Non-destructive testing. Acoustic emission. Testing of fibre reinforced polymers. Specific methodology and general evaluation criteria WEE/46 ISO Jewellery. Consumer confidence in the diamond industry STI/53 ISO Timber structures. Test methods. Floor vibration B/518 ISO Surface chemical analysis. Measurement of lateral resolution of confocal fluorescence microscope CII/60 ISO Photography. Digital cameras. Specification guideline CPW/42 ISO Technical product documentation (TPD). Relief grooves. Types and dimensioning TDW/4 ISO Dentistry. Scaler handpieces and scaler tips CH/106/4 ISO Testing requirements for structural insulated panel roof construction B/518 ISO Competencies for key personnel in relation to six sigma and lean implementation MS/6 ISO Underwater acoustical terminology EH/1/7 ISO Gasoline engines. Medium pressure liquid fuel supply connections. 60º female cone connectors MCE/22 ISO Gasoline engines. Medium pressure liquid fuel supply connections. Pipe assemblies MCE/22 ISO Quality management systems. Requirements for the application of ISO 9001:2008 educational organizations QS/-/-/1 ISO Needle-based injection devices for visuallyimpaired patients CH/84 ISO Agricultural irrigation equipment. Filters. Determination of filtration grade AGE/30 ISO Facility management. Terms and definitions will supersede BS EN :2006 FMW/1 ISO Facility management. Guidance on how to prepare facility management agreements will supersede BS EN :2006 FMW/1 ISO Safety of highly automated agricultural machines AGE/32 Update Standards December 2012 Prices may be subject to change. 43

44 New Work Started continued... ISO Paper and board. Automated off-line testing of physical properties for CD (Cross Direction) profiles PAI/11 ISO Human resource management. Cost-per-hire RPI/13 ISO/TR Guidance for conception, design and testing of LNG storage tanks PSE/17 ISO :2012/A1 Mechanical vibration. Measurement of vibration on ships. Measurement and evaluation of vibration of the ship propulsion machinery GME/21/3 ISO Hydraulic fluid power. Monitoring the level of particulate contamination. Use of the light extinction technique MCE/18/-/6 ISO Packaging. Vocabulary will supersede BS ISO 21067:2007 PKW/0 ISO Societal security. Mass evacuation SSM/1/-/10 ISO Industrial trucks. Verification of stability. Counterbalanced trucks with mast handling freight containers of 6m (20ft) length and longer MHE/7 ISO Aluminium oxide primarily used for production of aluminium. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method CII/24 ISO Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing will supersede BS ISO 23309:2007 MCE/18/-/6 ISO/TS Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC) will supersede DD CEN ISO/TS 25110:2008 EPL/278 ISO Hydrometry. Fishpasses at flow measurement structures will supersede BS ISO 26906:2009 CPI/113/2 IEC/TR :2008/A1 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Faults and switching PEL/22 IEC/TS Electrical Insulation Systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test GEL/112 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may comment online on any British Standard of national origin using the BSI Draft Review system. All you need to do is register at This service is free of charge. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 January, 2013 unless otherwise stated. If you would like to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 12/ DC NA to BS EN A1 UK National Annex to Eurocode 6. Design of masonry structures. General rules for reinforced and unreinforced masonry structures B/525/6 12/ DC BS Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises FSH/12/1 10 February, / DC BS 8487 A1 The design and construction of gas boosters used in association with combustion equipment. Specification GSE/33 12/ DC BS T 78 A1 Specification for 2 1 2% nickelchromium-molybdenum steel tubes (1390 MPa) 1/-/15 12/ DC BS T 79 A1 Specification for 2 1 2% nickelchromium-molybdenum steel tubes (1160 MPa) 1/-/15 12/ DC BS T 80 A1 Specification for 12% chromium corrosion-resisting steel tubes (770 MPa) 1/-/15 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS You may comment online on draft standards issued by CEN and ISO. The BSI Draft Review system has been modified to accommodate a wider range of standards content. The purpose of the website is to enhance access to Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices. All you need to do is register at This service is free of charge. Please note that CENELEC and IEC standards are not included on the BSI Draft Review system at this time, but are available in hard copy format from BSI Customer Services. All draft British Standards are available in hard copy format from BSI Customer Services (see How to order on page 2). Most drafts are charged at to members and for non-members. Larger draft documents are charged at a higher price according to the number of pages and, are priced individually below. Comments on all Draft British Standards are welcome and should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat. BSI Group, 389 Chiswick High Road, London W4 4AL by 31 January, 2013 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 12/ DC BS EN Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Generic RAMS process GEL/9 28 March, / DC BS ISO Terminology for doors and windows B/ December, Update Standards December 2012 Prices may be subject to change.

45 12/ DC BS ISO Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated endloaded split (C-ELS) test and an effective crack length approach PRI/42 10 December, / DC BS ISO Interpreting. Guidelines for community interpreting TS/1 7 January, / DC BS ISO Tourist information offices. Tourist information and reception services. Requirements SVS/2/8 14 December, / DC BS ISO Tractors and machinery for agriculture and forestry. Basic types. Definitions and classification AGE/6 24 December, / DC BS EN ISO/IEC Small craft. Electric propulsion system GME/33 12/ DC BS EN Radiation protection instrumentation. Warning equipment for criticality accidents NCE/2 31 December, / DC BS ISO Indoor air. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) EH/2/3 24 December, / DC BS ISO Protein fibres. Electronic test method for defects and evenness of raw silk TCI/24 24 December, / DC BS EN Electricity metering equipment (a.c.). Particular requirements. Static meters for fundamental component reactive energy (classes 0,5 S, 1S and 1) PEL/13 12/ DC BS EN ISO Paints and varnishes. Determination of reflection haze on paint films at 20 degrees STI/10 12/ DC BS EN ISO 2813 Paints and varnishes. Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees STI/10 12/ DC BS IEC Radiation protection instrumentation. Radon and radon decay product measuring instruments. Specific requirements for 222Rn and 220Rn measuring instruments NCE/2 19 January, / DC BS EN Fire hazard testing. Abnormal heat. Ball pressure test GEL/89 11 January, / DC BS EN ISO Technical product documentation. Digital product definition data practices members, non-members TDW/4 28 February, / DC BS EN ISO Gas cylinders. Composite construction. Periodic inspection and testing PVE/3/7 1 February, / DC BS ISO Writing and marking instruments. Specification for caps to reduce the risk of asphyxiation TDW/4 21 January, / DC BS EN Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Systems approach to safety GEL/9 28 February, / DC BS EN Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Functional safety electrical/electronic/programmable electronic systems members, non-members GEL/9 28 February, / DC BS EN Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Functional Safety Software members, non-members GEL/9 28 February, / DC BS EN ISO 8044 A1 Corrosion of metals and alloys. Basic terms and definitions ISE/NFE/8 12/ DC BS ISO/IEC Software and systems engineering. Software testing. Concepts and definitions IST/15 10 December, / DC BS EN ISO Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements WEE/18 11 February, / DC BS EN ISO Petroleum products. Determination of carbon residue. Micro method PTI/13 12/ DC BS ISO Resilient floor covering. Determination of the effect of simulated movement of a furniture leg PRI/3 17 December, / DC BS EN High-voltage switchgear and controlgear. Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kv PEL/17/1 11 December, 2012 Update Standards December 2012 Prices may be subject to change. 45

46 Drafts for Public Comment continued... 12/ DC BS EN Appliance couplers for household and similar general purposes. General requirements PEL/23/3 8 January, / DC BS EN Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results members, non-members EPL/80 12/ DC BS EN ISO 8098 Cycles. Safety requirements for bicycles for young children GME/25 12/ DC BS ISO/IEC Road vehicles. Vehicle to grid communication interface. Physical and data link layer requirements AUE/16 7 January, / DC BS ISO Water quality. Uranium isotopes. Test method using alpha spectrometry EH/3 17 December, / DC BS ISO Water quality. Radium 226. Test method using emanometry EH/3 24 December, / DC BS EN Design criteria of overhead transmission lines PEL/11 18 January, / DC BS EN Explosive atmospheres. Gas detectors. Guidance on functional safety of fixed gas detection systems EXL/31 20 December, / DC BS EN ISO 6509 Corrosion of metals and alloys. Determination of dezincification resistance of copper alloys with zinc ISE/NFE/8 12/ DC BS ISO Space systems. Measurements of thermo-optical properties of thermo control materials 8 10 December, / DC BS EN Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions RAE/2 12/ DC BS EN Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Normalized railway noise spectrum and single number ratings for direct field applications RAE/2 12/ DC BS ISO Wheelchairs. Determination of static stability CH/173/1 17 December, / DC BS ISO Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Stainless steel cylinders with an Rm value of less than 1100 MPa PVE/3 21 January, / DC BS ISO/IEC Systems and software engineering. Information technology project performance benchmarking framework. Requirements for benchmarking IST/15 24 December, / DC BS ISO Adventure tourism. Safety management systems. Requirements SVS/2/5 24 December, / DC BS ISO Adventure tourism. Information to participants. Minimum requirements before, during and after the adventure tourism activity SVS/2/5 24 December, / DC BS ISO A1 Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports EH/1/2 17 December, / DC BS EN ISO Recreational diving services. Requirements for the training of recreational scuba divers. Level 1. Supervised diver SVS/2/4 12/ DC BS EN ISO Recreational diving services. Requirements for the training of recreational scuba divers. Level 2. Autonomous diver SVS/2/4 12/ DC BS EN ISO Recreational diving services. Requirements for the training of recreational scuba divers. Level 1. Supervised diver SVS/2/4 12/ DC BS EN ISO Recreational diving services. Requirements for the training of scuba instructors. Level SVS/2/4 12/ DC BS EN ISO Recreational diving services. Requirements for the training of scuba instructors. Level 2 SVS/2/4 12/ DC BS ISO Heat recovery ventilators and energy recovery ventilators. Method of test for performance RHE/17 17 December, / DC BS ISO Surface active agents (non-ionic). Determination of polyethylene glycols in nonionic ethylene-oxide-surfactants. HPLC method CII/34 17 December, / DC BS ISO Decorative veneered plywood B/ December, Update Standards December 2012 Prices may be subject to change.

47 12/ DC BS ISO Fire-resistance tests. Lift landing door assemblies FSH/22/-/5 24 December, / DC BS ISO Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side MCE/7 10 December, / DC BS EN A1 Fixed, vertical road traffic signs. Factory production control B/509/3 31 December, / DC BS EN A1 Fixed, vertical road traffic signs. Transilluminated traffic bollards (TTB) B/509/3 31 December, / DC BS EN A1 Fixed, vertical road traffic signs. Delineator posts and retroreflectors B/509/3 31 December, / DC BS EN A1 Fixed, vertical road traffic signs. Fixed signs B/509/3 31 December, / DC BS EN A1 Fixed, vertical road traffic signs. Initial type testing B/509/3 31 December, / DC BS EN Fixed, vertical road traffic signs. Performance of retroreflective sign face materials B/509/3 31 December, / DC BS EN A1 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment CH/62/2 11 December, / DC BS EN Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures TCI/69 12/ DC BS ISO Blockboards and battenboards B/ December, / DC BS ISO 1096 Plywood. Classification B/ December, / DC BS EN Safety of machinery. Application of protective equipment to detect the presence of persons members, non-members MCE/3 11 December, / DC BS ISO Fans. Air curtain units. Laboratory methods of testing for sound power MCE/17 3 December, / DC BS EN Energy audits. Buildings SEM/1/1 18 January, / DC BS EN Energy audits. Processes SEM/1/1 18 January, / DC BS EN Energy audits. Transport SEM/1/1 18 January, / DC BS EN Electric vehicle conductive charging system. Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging PEL/69 12/ DC BS EN Safety of children s clothing. Cords and drawstrings on children s clothing. Specifications TCI/66 12/ DC BS EN Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. General requirements EH/2/2 1 February, / DC BS EN Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency EH/2/2 1 February, / DC BS EN Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations EH/2/2 1 February, / DC BS EN Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces EH/2/2 1 February, / DC BS EN Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests EH/2/2 1 February, 2013 Update Standards December 2012 Prices may be subject to change. 47

48 Drafts for Public Comment continued... 12/ DC BS EN Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Service lines. Specific functional requirements GSE/33 12/ DC BS EN Stationary source emissions. Quality assurance of automated measuring systems EH/2/1 11 February, / DC BS EN ISO 8311 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods PTI/12 12/ DC BS EN 71-7 Safety of toys. Finger paints. Requirements and test methods CW/15 11 February, / DC BS EN Crane safety. General design. Load actions MHE/3/1 12/ DC BS EN ISO Leather. Chemical tests for the determination of certain azo colorants in dyed leathers. Determination of certain aromatic amines derived from azo colorants TCI/69 12/ DC BS EN ISO 2588 Leather. Sampling. Number of items for a gross sample TCI/69 12/ DC BS EN Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications. Type ODVA APC terminated on EN category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN and IEC GEL/86/2 12/ DC BS ISO Ships and marine technology. Methodology for launching ship utilizing air bags SME/32/-/8 10 December, / DC BS EN Electrical safety in distribution systems up to 1000 V a.c and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the safety of electrical equipment and medical electrical equipment according to IEC and IEC PEL/85 15 December, / DC BS ISO Cranes. Hand signals used with cranes MHE/3/11 24 December, / DC BS ISO 8277 Shipbuilding. Pipework. Information transfer SME/32/-/3 24 December, / DC BS ISO Implants for surgery. Cardiac pacemakers. Low-profile connectors (IS-1) for implantable pacemakers CH/ December, / DC BS ISO/IEC Information technology. High efficiency coding and media delivery in heterogeneous environments. High efficiency video coding members, non-members IST/37 10 December, / DC BS ISO/IEC Information technology. MPEG video technologies. Reconfigurable media coding conformance and reference software IST/37 10 December, / DC BS ISO/IEC A2 Information technology. Coding of audio-visual objects. Advanced video coding IST/37 10 December, / DC BS ISO/IEC A3 Information technology. Multimedia application format (MPEG-A). Interactive music application format IST/37 10 December, / DC BS ISO/IEC Information technology. MPEG systems technologies. Codingindependent code-points IST/37 10 December, / DC BS ISO Mechanical vibration. Rotor balancing. Susceptibility and sensitivity of machines to unbalance GME/21/5 17 December, / DC BS EN Safety of woodworking machines. Circular sawing machines. Circular sawing machines for fire wood MTE/23 12/ DC BS EN Cranes. General design. Limit states and proof of competence of wheel/rail contacts MHE/3/1 12/ DC BS EN Wastewater lifting plants for buildings and sites. Lifting plants for wastewater containing faecal matter B/505/21 6 February, / DC BS EN Wastewater lifting plants for buildings and sites. Lifting plants for faecal-free wastewater B/505/21 6 February, / DC BS EN Wastewater lifting plants for buildings and sites. Lifting plants for limited applications B/505/21 6 February, Update Standards December 2012 Prices may be subject to change.

49 12/ DC BS EN Wastewater lifting plants for buildings and sites. Non-return valves for faecalfree wastewater and wastewater containing faecal matter B/505/21 6 February, / DC BS EN High-voltage switchgear and controlgear. Digital interfaces based on IEC PEL/17/1 8 January, / DC BS ISO Conveyor belts. Characteristics of covers. Classification PRI/67 3 December, / DC BS EN Open data communication in building automation, controls and building management. Control network protocol. Protocol stack members, non-members RHE/16 12/ DC BS EN Open data communication in building automation, controls and building management. Control network protocol. Twisted pair communication RHE/16 12/ DC BS EN Open data communication in building automation, controls and building management. Control network protocol. Power line channel specification RHE/16 12/ DC BS EN Open data communication in building automation, controls and building management. Control network protocol. IP communication RHE/16 12/ DC BS ISO/IEC Implementation and operation of CPC. Testing of optical fibre cabling TCT/7 24 December, / DC BS ISO Cranes. Monitoring for crane design life MHE/3/11 31 December, / DC BS ISO Microscopes. Designation of microscope objectives. Flatness of field/plan CPW/ December, / DC BS EN ISO Dentistry. Base polymers. Denture base polymers CH/106/2 5 December, / DC BS EN Photovoltaics in buildings GEL/82 12/ DC BS EN 1790 Road marking materials. Preformed road markings B/509/2 12/ DC BS EN 1871 Road marking materials. Paint, thermoplastic and cold plastic materials Specifications B/509/2 12/ DC BS ISO Space data and information transfer systems. Missions operations reference model 8 14 January, / DC BS ISO Space data and information transfer systems. Mission operations message abstraction layer members, non-members 8 14 January, / DC BS EN Liquid petroleum products. Determination of sodium, potassium, calcium phosphorus, copper and zinc contents in diesel fuel. Methold via Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) PTI/13 12/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances CPL/61/7 12/ DC BS EN Instrument transformers. Digital interface for instrument transformers PEL/38 11 December, / DC BS EN Explosive atmospheres. Equipment protection by powder filling q EXL/31 8 December, / DC BS EN 1304 Clay roofing tiles and fittings. Product definitions and specifications B/542/3 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sodium hypochlorite CII/59 12/ DC BS EN Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate CII/59 12/ DC BS EN Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid CII/59 12/ DC BS EN 1018 Chemicals used for treatment of water intended for human consumption. Calcium carbonate CII/59 12/ DC BS EN 901 Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite CII/59 12/ DC BS EN Chemicals used for treatment of swimming pool water. Aluminium based coagulants CII/59 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sodium hydroxide CII/59 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sulfuric acid CII/59 Update Standards December 2012 Prices may be subject to change. 49

50 Drafts for Public Comment continued... 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate CII/59 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous CII/59 12/ DC BS EN Round and sawn timber. Environmental product declarations. Product category rules for wood and wood-based products for use in construction B/543 12/ DC BS EN Machines for compacting waste materials or recycable fractions. Compactors. Safety requirements MCE/3/16 31 December, / DC BS ISO Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa) AW/54 31 December, / DC BS EN Sports mats. Determination of shock absorption SW/136/22 15 January, / DC BS EN 900 Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite CII/59 12/ DC BS EN Electronic fee collection. Interoperability application profile for DSRC EPL/278 12/ DC BS EN Professional indoor sun exposure services. Requirements for the provision of training SVS/19/2 12/ DC BS EN Coil coated metals. Test methods. General introduction and list of test methods STI/27 12/ DC BS EN Coil coated metals. Test methods. Colour difference. Instrumental comparison STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to rapid deformation (impact test) STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to cracking on bending (Tbend test) STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to water immersion STI/27 12/ DC BS EN Coil coated metals. Test methods. Chalking (Helmen method) STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to humidity STI/27 12/ DC BS EN Coil coated metals. Test methods. Gloss STI/27 12/ DC BS EN Coil coated metals. Test methods. Pencil hardness STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to condensation of water STI/27 12/ DC BS EN Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat STI/27 12/ DC BS EN Paints and varnishes. Evaluation of the surface disfigurement caused by fungi and algae on coatings STI/28 12/ DC BS EN Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel B/510/1 18 February, / DC BS EN Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids GEL/89 9 January, / DC BS EN 1048 Heat exchangers. Air cooled liquid coolers ( dry coolers ). Test procedures for establishing performance RHE/30 12/ DC BS EN 327 Heat exchangers. Forced convection air cooled refrigerant condensers. Test procedures for establishing performance RHE/30 12/ DC BS EN 328 Heat exchangers. Forced convection unit air coolers for refrigeration. Test procedures for establishing the performance RHE/30 12/ DC BS EN Air traffic management. Information security for organisations supporting civil aviation operations ACE/58/-/5 12/ DC BS ISO Cranes. Design principles for seismic load MHE/3/1 10 December, / DC BS ISO Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions LBI/37 10 December, / DC BS EN Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements MCE/3/16 12/ DC BS ISO Health informatics. Privilege management and access control. Overview and policy management IST/35 17 December, Update Standards December 2012 Prices may be subject to change.

51 BS EN ISO Start saving energy, money and the environment This standard will help you to run an efficient energy management system. These include energy policies, planning, legal requirements, as well as energy reviews, baseline and performance indicators. The standard also explains how to demonstrate competence, operational control and best practice procurement of energy services, products and equipment. Published in June 2011, ISO has experienced a rapid international uptake and is already implemented in 44 countries worldwide. This International Standard enables organizations to establish the systems and processes necessary to improve energy performance. At BSI we can also help you understand and embed energy management best practice with training and certification to prove your success with the Energy Reduction Kitemark. Are you ready to take the challenge? Standards BS EN ISO standard which lays out internationally recognized best practice. Training Start saving sooner and avoid common mistakes with the UK s leading energy management system trainers. Certification Reassure your stakeholders and embed best practice with energy management systems certification. Kitemark If you need to demonstrate success to your customers or to regulators, choose the UK s most trusted verification mark Discover how BS EN ISO is helping other organizations. Read the case studies shop.bsigroup.com/bsiso50001us1212 Buy your standard now shop.bsigroup.com/bsiso50001us1212 Read more at: shop.bsigroup.com/environmentalstandardsus1212 To contact us visit shop.bsigroup.com/bsiso50001us1212 or contact Customer Services quoting marketing reference code BSISO50001-US1212 T F orders@bsigroup.com shop.bsigroup.com/bsiso50001us1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

52 Drafts for Public Comment continued... 12/ DC BS ISO Health informatics. Privilege management and access control. Formal models IST/35 17 December, / DC BS ISO Health informatics. Privilege management and access control. Implementations IST/35 17 December, / DC BS IEC A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Radiation protection in diagnostic X- ray equipment CH/62/2 10 December, / DC BS EN A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally conscious design CH/62/1 7 December, / DC BS EN ISO Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) CH/106 12/ DC BS IEC A1 Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General GEL/20/16 12/ DC BS EN Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125ºC, for EN contacts. Technical specification 31 December, / DC BS IEC A3 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance GEL/20/16 12/ DC BS EN A1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables GEL/20/17 12/ DC BS EN A1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations GEL/20/17 12/ DC BS EN A1 Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS). Carrier-sense time division multiple access (CSTDMA) techniques EPL/80 12/ DC BS EN Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between - 55ºC and 200ºC. MNA (1 core) MNB (pair), MNC (3 cores), MND (4 cores), cables family. Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard 18 January, / DC BS EN Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55ºC and 200ºC. DRP (Pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard 18 February, / DC BS EN Electric motor-operated hand-held tools, Transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held screwdrivers and impact wrenches CPL/116 12/ DC BS EN Electric motor-operated hand-held tools, Transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held sanders and polishers other than disc type CPL/116 12/ DC BS EN Self-ballasted fluorescent lamps for general lighting services. Safety requirements CPL/34/1 10 December, / DC BS IEC Fire hazard testing. Glowing/hot-wire based test methods. Glowwire flammability test method for end products GEL/89 11 January, / DC BS EN Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for power distribution in public networks PEL/17/3 12/ DC BS EN A1 Fire hazard testing. Glowing/hot-wire based test methods. Glowwire flammability index (GWFI) test method for materials GEL/89 18 January, / DC BS EN A1 Fire hazard testing. Glowing/hot-wire based test methods. Glowwire ignition temperature (GWIT) test method for materials GEL/89 18 January, / DC BS ISO Cranes. Inspections. General MHE/3/3 31 December, / DC BS EN A1 Junction boxes for photovoltaic modules GEL/82 12/ DC BS EN Data centre facilities and infrastructures. Environmental control TCT/7 18 December, / DC BS EN Electrical insulation systems. Thermal evaluation of modifications to an established EIS. Form-wound EIS GEL/ December, / DC BS EN Electrical insulation systems. Thermal evaluation of modifications to an established EIS. Wire-wound winding EIS GEL/ December, Update Standards December 2012 Prices may be subject to change.

53 12/ DC BS EN A1 Quartz crystal controlled oscillators of assessed quality. Generic specification EPL/49 15 December, / DC BS EN Data centre facilities and infrastructures. Security systems TCT/7 18 December, / DC BS EN A1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications CPL/34/1 15 January, / DC BS EN Function blocks (FB) for process control and Electronic device description language (EDDL). EDD interpretation members, non-members AMT/7 15 January, / DC BS ISO Carbon footprint of products. Requirements and guidelines for quantification and communication SES/1/7 21 December, / DC BS EN Appliance couplers for household and similar general purposes. Standard sheets and gauges PEL/23/3 8 January, / DC BS EN A1 Power installations exceeding 1 kv a.c. Common rules PEL/99 15 January, / DC BS ISO Personal Health Record System Functional Model, Release 1 (PHRS FM) members, non-members IST/35 7 January, / DC BS EN Electrical safety in low voltage distribution systems up to 1000 v a.c. and 1500 v d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems PEL/85 15 January, / DC BS EN Electrical safety in low voltage distribution systems up to 1000 v a.c. and 1500 v d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for insulation fault location in IT systems PEL/85 15 January, / DC BS EN A1 Quartz crystal units of assessed quality. Generic specification EPL/49 15 January, 2013 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for fracture toughness of monolithic ceramics. Single-edge V-notch beam (SEVNB) method The above draft has been issued at FDIS Stage. A copy of the draft is available on request from the contact point (below). This standard is currently out for FDIS vote without a DPC. Contact: Committee Service Centre csc@bsigroup.com RPI/13 pren ISO Light conveyor belts. Determination of electrical resistances PRI/67 pren ISO Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt These two documents have recently been issued at FDIS and UAP stages. Copies are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com PRI/67 FprEN ISO 4492 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering The document is available until 21 December, 2012 from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ISE/65 FprEN 3864 Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture The above draft has been issued at CEN Formal Vote Stage. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com 5 FprCEN/TS Fertilizers. Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions This draft Technical Specification has been circulated to the UK committee for Formal Vote ballot with a CEN deadline for response of 11 January, Copies of the draft text are available under document reference CII/37_12_0124 from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com CII/37 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 117:2012 Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) B/515 EN 228:2012 Automotive fuels. Unleaded petrol. Requirements and test methods PTI/2 Update Standards December 2012 Prices may be subject to change. 53

54 CEN European Standards continued... EN 397:2012+A1:2012 Industrial safety helmets PH/6/1 EN 691-1:2012 Safety of woodworking machines. Common requirements MTE/23 EN 848-3:2012 Safety of woodworking machines. One side moulding machines with rotating tool. Numerically controlled (NC) boring and routing machines MTE/23 EN 966:2012+A1:2012 Helmets for airborne sports PH/6/6 EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates PH/6/4 EN :2012 Hardwood round timber. Qualitative classification. Oak and beech B/543 EN :2012 Hardwood round timber. Qualitative classification. Poplar B/543 EN :2012 Fire resistance tests for loadbearing elements. Walls FSH/22/-/7 EN :2012 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Technical specification EN 12173:2012 Chemicals used for treatment of water intended for human consumption. Sodium fluoride CII/59 EN :2011+A1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fittings PRI/88/2 EN 12386:2012 Chemicals used for treatment of water intended for human consumption. Copper sulfate CII/59 EN 12599:2012 Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems RHE/2 EN 12905:2012 Products used for treatment of water intended for human consumption. Expanded aluminosilicate CII/59 EN 12906:2012 Products used for treatment of water intended for human consumption. Pumice CII/59 EN 12914:2012 Products used for treatment of water intended for human consumption. Powdered perlite CII/59 EN :2012 Water-tube boilers and auxiliary installations. Requirements for equipment for the boiler PVE/2 EN :2012 Water-tube boilers and auxiliary installations. Operating instructions PVE/2 EN 13067:2012 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies PRI/80 EN :2012 Non destructive testing of welded joints of thermoplastics semi-finished products. High voltage testing PRI/80 EN 13104:2009+A2:2012 Railway applications. Wheelsets and bogies. Powered axles. Design method RAE/3/-/1 EN 13469:2012 Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation B/540 EN 13472:2012 Thermal insulating products for building equipment and industrial installations. Determination of short term water absorption by partial immersion of preformed pipe insulation B/540 EN :2012 Pigments and extenders. Methods of dispersion and assessment of dispersability in plastics. Determination by film test STI/1 EN 14052:2012+A1:2012 High performance industrial helmets PH/6/1 EN 14706:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature B/540 EN 14707:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation B/540 EN :2012 Gas-fired central heating boilers. Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kw GSE/29 EN 15528:2008+A1:2012 Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure RAE/1/-/8 EN 15684:2012 Building hardware. Mechatronic cylinders. Requirements and test methods B/538/4 EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) B/540 EN 15814:2011+A1:2012 Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements B/546 EN 15839:2012 Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Testing of running safety under longitudinal compressive forces RAE/1/-/8 EN 15997: All terrain vehicles (ATVs-Quads). Safety requirements and test methods CORRIGENDUM 1:October 2012 to EN 15997:2011 AGE/6 54 Update Standards December 2012 Prices may be subject to change.

55 EN :2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions RAE/2 EN :2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Airborne sound insulation in the laboratory under diffuse sound field conditions RAE/2 EN :2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Normalized railway noise spectrum and single number ratings for diffuse field applications RAE/2 EN 16280:2012 Breath alcohol test devices for general public. Requirements and test methods PTI/15 EN 16296:2012 Imperfections in thermoplastics welded joints. Quality levels PRI/80 EN :2012 Pumps. Rotodynamic pumps. Glandless circulators. General requirements and procedures for testing and calculation of energy efficiency index (EEI) MCE/6 EN :2012 Pumps. Rotodynamic pumps. Glandless circulators. Calculation of energy efficiency index (EEI) for standalone circulators MCE/6 Please do not send confirmation of orders placed by telephone as it can lead to duplication CEN REPORTS CEN/TR :2012 Geographic information. Spatial data infrastructures. Reference model IST/36 CEN/TR :2012 Geographic information. Spatial data infrastructures. Best practices IST/36 CEN/TR :2012 Geographic information. Spatial data infrastructures. Data centric view IST/36 CEN/TR 16365:2012 Characterization of waste. Sampling of waste from extractive industries B/508/3 CEN/TR 16376:2012 Characterization of waste. Overall guidance document for characterization of waste from the extractive industries B/508/3 CEN/TR 16396:2012 Playground equipment for children. Replies to requests for interpretation of EN 1176:2008 and its parts SW/65 CEN/TR 16410:2012 Construction products. Assessment of release of dangerous substances. Barriers to use. Extension to CEN/TR Barriers to trade B/557 CEN/TR 16420:2012 Analytical method for the analysis of propiconazole in treated wood samples B/515 CEN/TR 16435:2012 Liquid petroleum products. Oxygenates blending in line with actual EN 228 requirements PTI/2 CEN TECHNICAL SPECIFICATIONS CEN/TS :2012 Identification card systems. European Citizen Card. Physical, electrical and transport protocol characteristics IST/17 CEN/TS 16398:2012 Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet PRI/-/1 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 50400: Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz-40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service AMENDMENT 1:October 2012 to EN 50400:2006 GEL/106 EN 50536: Protection against lightning. Thunderstorm warning systems AMENDMENT 1:October 2012 to EN 50536:2011 GEL/81 EN : (IEC :1969/A48:2012) Lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps AMENDMENT 48:November 2012 to EN :1993 CPL/34/2 EN : (IEC :1969/A45:2012) Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders AMENDMENT 45:November 2012 to EN :1993 CPL/34/2 EN : (IEC :1969/A46:2012) Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges AMENDMENT 46:November 2012 to EN :1993 CPL/34/2 EN :2012 (IEC :2012) Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer GEL/55 Update Standards December 2012 Prices may be subject to change. 55

56 CENELEC Publications continued... EN :2012 (IEC :2012) Specifications for particular types of winding wires. Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 GEL/55 EN : (IEC :2009/A1:2012) Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography AMENDMENT 1:October 2012 to EN :2009 CH/62/2 EN :2012 (IEC :2012) Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for tumble dryers CPL/59/1 EN :2012 (IEC :2012) Optical fibre cables. Generic specification. Basic optical cable test procedures. Cable element test methods GEL/86/1 EN 60809: (IEC 60809:1995/A5:2012) Lamps for road vehicles. Dimensional, electrical and luminous requirements AMENDMENT 5:October 2012 to EN 60809:1996 CPL/34/1 EN :2012 (IEC :1993) Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches CPL/116/3 EN :2012 (IEC :1995) Safety of transportable motor-operated electric tools. Particular requirements for mitre saws CPL/116/3 EN :2012 (IEC :2001) Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws CPL/116/3 EN 61549: (IEC 61549:2003/A3:2012) Miscellaneous lamps AMENDMENT 3:October 2012 to EN 61549:2003 CPL/34/1 EN :2012 (IEC :2012) Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode fibre optic pigtailed isolators for category C. Controlled environment GEL/86/2 EN 61982:2012 (IEC 61982:2012) Secondary batteries (except lithium) for the propulsion of electric road vehicles. Performance and endurance tests PEL/21 EN :2012 (IEC :2012) Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of dibenzyldisulfide (DBDS) GEL/10 HARMONIZATION DOCUMENTS HD : Low-voltage electrical installations. Requirements for special installations or locations. Agricultural and horticultural premises AMENDMENT 11:October 2012 to HD :2007 JPEL/64 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2012 (Edition 2) Environmental testing. Tests. Test Cab. Damp heat, steady state members, non-members GEL/104 IEC :2012 (Edition 3) Radio frequency cables. Guidelines to the design of detail specifications. Coaxial cables members, non-members EPL/46 IEC :2012 (Edition 6) Household and similar electrical appliances. Safety. Particular requirements for dishwashers members, non-members CPL/61/14 IEC : Household and similar electrical appliances. Safety. Particular requirements for tumble dryers AMENDMENT 1:October 2012 to IEC : members, non-members CPL/61/14 IEC :2012 (Edition 6) Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids members, non-members CPL/61/7 IEC :2012 (Edition 6) Household and similar electrical appliances. Safety. Particular requirements for storage water heaters members, non-members CPL/61/7 IEC : Household and similar electrical appliances. Safety. Particular requirements for electrical heating appliances for breeding and rearing animals AMENDMENT 2:October 2012 to IEC : members, non-members CPL/61/8 IEC : Household and similar electrical appliances. Safety. Particular requirements for electric fishing machines AMENDMENT 2:October 2012 to IEC : members, non-members CPL/61/8 IEC : Household and similar electrical appliances. Safety. Particular requirements for electrical animal-stunning equipment AMENDMENT 2:October 2012 to IEC : members, non-members CPL/61/8 IEC : Electrical installations of buildings. Selection and erection of electrical equipment. Other equipment AMENDMENT 1:October 2012 to IEC : members, non-members JPEL/64 56 Update Standards December 2012 Prices may be subject to change.

57 NEW PD 5500:2012+A1:2012 Specification for unfired fusion welded pressure vessels Get the latest PD 5500:2012 specification for unfired fusion welded pressure vessels. This new edition tells you everything you need to know about designing and assessing pressure vessels. And it can be used to support systems built to BS 5500 or PD What s new? PD 5500:2012+A1:2012 outlines the latest amendments to the specification up to and including those published in September It also includes details of enquiry cases and is updated every three years. Your PD 5500 subscription includes free updates on further amendments. The new three-year cycle includes updates and new enquiry cases. The three-year subscription to PD 5500 includes free regular updates as amendments are made to the specification. Key amendments for 2012 Inclusion in Enquiry Case 5500/127 on wind loading of a procedure based on the methods given in BS EN A1:2010 for calculating wind loads Clarification of the specific requirements for vessels made from aluminium with all requirements for aluminium now appearing in the aluminium supplement Updates to various internal and external references and revisions to Enquiry Case 5500/134 on superseded referenced standards Corrections, based on the committee s consideration of contributions made by committee members and comments by users, including updates to the Foreword, Annex W.1.2, the Copper supplement, the Titanium supplement, and various other clauses throughout the Code. Key features: Specifies requirements for design, manufacture, inspection, testing and verification Can provide a basis for vessel design and manufacture for PED compliance Contains all amendments, annexes and enquiry cases made during last three years Supersedes PD 5500:2009 which is now withdrawn. shop.bsigroup.com/pd5500us1212 To contact us visit shop.bsigroup.com/pd5500us1212 or contact Customer Services quoting marketing reference code PD5500-US1212 T F orders@bsigroup.com shop.bsigroup.com/pd5500us1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

58 IEC Publications continued... IEC : Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment AMENDMENT 1:October 2012 to IEC : members, non-members EPL/76 IEC :2012 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of infusion pumps and controllers members, non-members CH/62/4 IEC : Switches for household and similar fixedelectrical installations. General requirements INTERPRETATION SHEET 1:February 2012 to IEC :1998 PEL/23 IEC 60688:2012 (Edition 3) Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals members, non-members PEL/85 IEC :2012 (Edition 2) Optical fibres. Measurement methods and test procedures. Gamma irradiation members, non-members GEL/86/1 IEC :2012 (Edition 3) Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres members, non-members GEL/86/1 IEC :2012 Optical fibre cables. Aerial optical cables along electrical power lines. Family specification for ADSS (All Dielectric Self Supported) optical cables members, non-members GEL/86/1 IEC : Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins AMENDMENT 1:October 2012 to IEC : members, non-members GEL/15/6 IEC 61195: Double-capped fluorescent lamps. Safety specifications AMENDMENT 1:October 2012 to IEC 61195: members, non-members CPL/34/1 IEC :2012 (Edition 2) Coaxial communication cables. Mechanical test methods. Test for tensile strength and elongation for copper-clad metals members, non-members EPL/46 IEC :2012 (Edition 4) Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement members, non-members GEL/86/3 IEC : Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat, cyclic CORRIGENDUM 1:October 2012 to IEC :2006 GEL/86/2 IEC :2012 (Edition 2) Lamp controlgear. Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) members, non-members CPL/34/3 IEC :2012 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode fibre optic pigtailed circulators for category C. Controlled environments members, non-members GEL/86/2 IEC :2012 (Edition 2) Communication networks and systems for power utility automation. Basic communication structure. Hydroelectric power plants. Communication for monitoring and control members, non-members PEL/57 IEC :2012 (Edition 2) Application integration at electric utilities. System interfaces for distribution management. Interface architecture and general recommendations members, non-members PEL/57 IEC :2012 (Edition 2) Maritime navigation and radiocommunication equipment and systems. Automatic identification systems (AIS). Class A shipborne equipment of the automatic identification system (AIS). Operational and performance requirements, methods of test and required test results members, non-members EPL/80 IEC 62031: LED modules for general lighting. Safety specifications AMENDMENT 1:October 2012 to IEC 62031: members, non-members CPL/34/1 IEC/IEEE :2012 High-voltage switchgear and controlgear. Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers members, non-members PEL/17 IEC :2012 (Edition 2) High-voltage switchgear and controlgear. Synthetic testing members, non-members PEL/17/1 IEC 62276:2012 (Edition 2) Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods members, non-members EPL/49 IEC : Fuel cell technologies. Micro fuel cell power systems. Safety AMENDMENT 1:October 2012 to IEC : members, non-members GEL/ Update Standards December 2012 Prices may be subject to change.

59 BCM for SMEs: New Book by David Lacey out now! Any incident, large or small, can cause major disruption to your organization. However if you plan now, rather than wait for it to happen, you will be able to get back to business in the quickest possible time. David Lacey, author of Business Continuity Management for Small and Medium Sized Enterprises: How to survive a major disaster or failure teaches SMEs how to master business continuity management with minimum time, funding and manpower. His book seeks to equip non-specialists with the practical skills and knowledge needed to identify business continuity risks and deter them from occurring in the first place. The book will enable your organization to: Master the BCM Programme Management lifecycle Determine a successful BCM strategy Identify crucial risk factors already affecting your organization Deliver continued service during and beyond an emergency Embed BCM into its culture Maintain adequate measures to protect information, stock, premises and staff if an incident occurs Effectively understand business continuity management and develop a plan well suited to your requirements today! Start by downloading your free chapter: shop.bsigroup.com/bip2217us1212 A Guide to Emergency Lighting Second Edition The book helps users and designers, installation and maintenance engineers understand the legislative demand to provide appropriate emergency lighting systems to assist occupants to leave premises safely. It covers all aspects of the selection, design, installation, maintenance and testing of battery powered emergency lighting systems. This new edition has been updated to assist those engineers wishing to protect occupants from the hazards identified by risk assessments and has also been expanded to give guidance to protect occupants from sudden loss of the normal lighting supply. shop.bsigroup.com/bip2081us1212

60 IEC Publications continued... IEC/TR :2012 Power systems management and associated information exchange. Data and communications security. Security architecture guidelines members, non-members PEL/57 IEC/TR :2012 Power systems management and associated information exchange. Reference architecture members, non-members PEL/57 IEC 62358:2012 (Edition 2) Ferrite cores. Standard inductance factor for gapped cores and its tolerance members, non-members EPL/51 IEC/TS 62622:2012 Nanotechnologies. Description, measurement and dimensional quality parameters of artificial gratings members, non-members NTI/1 IEC 62623:2012 Desktop and notebook computers. Measurement of energy consumption members, non-members EPL/108 IEC/TS 62635:2012 Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment members, non-members GEL/111 IEC/TS 62644:2012 Professional video storage equipment. Guideline of time code transmission members, non-members EPL/100 IEC :2012 High frequency inductive components. Fixed surface mount inductors for use in electronic and telecommunication equipment members, non-members EPL/51 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 1382:2012 (Edition 6) Rubber. Vocabulary members, non-members PRI/10 ISO 3308:2012 (Edition 5) Routine analytical cigarette-smoking machine. Definitions and standard conditions members, non-members AW/40 ISO :2012 (Edition 2) Methods of test for full-flow lubricating oil filters for internal combustion engines. Vibration fatigue test members, non-members MCE/21/5 ISO :2012 (Edition 2) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of delamination and corrosion around a scribe or other artificial defect members, non-members STI/10 ISO 5950:2012 (Edition 5) Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities members, non-members ISE/109 ISO :2012 (Edition 2) Paper, board and pulps. Determination of ph of aqueous extracts. Cold extraction members, non-members PAI/11 ISO :2012 (Edition 2) Paper, board and pulps. Determination of ph of aqueous extracts. Hot extraction members, non-members PAI/11 ISO 7010: Graphical symbols. Safety colours and safety signs. Registered safety signs AMENDMENT 3:October 2012 to ISO 7010: members, non-members PH/8/1 Will not be implemented as a British Standard ISO :2012 (Edition 2) Water-cooled secondary connection cables for resistance welding. Test requirements members, non-members WEE/29 ISO/IEC : Information technology. Keyboard layouts for text and office systems. Symbols used to represent functions AMENDMENT 1:October 2012 to ISO/IEC : members, non-members ICT/-/6 Will not be implemented as a British Standard ISO/IEEE :2012 Health informatics. Point-of-care medical device communication. Interface profile. Cabled ethernet members, non-members IST/35 ISO/IEC : Identification cards. Test methods. General characteristics AMENDMENT 1:November 2012 to ISO/IEC : members, non-members IST/17 ISO/IEC : Identification cards. Test methods. Proximity cards AMENDMENT 2:October 2012 to ISO/IEC : members, non-members IST/17 ISO/IEEE :2012 Health informatics. Personal health device communication. Device specialization. Body composition analyzer members, non-members IST/35 60 Update Standards December 2012 Prices may be subject to change.

61 ISO/IEEE :2012 Health informatics. Personal health device communication. Device specialization. Peak expiratory flow monitor (peak flow) members, non-members IST/35 ISO/IEEE :2012 Health informatics. Personal health device communication. Device specialization. Medication monitor members, non-members IST/35 ISO 11132:2012 Sensory analysis. Methodology. Guidelines for monitoring the performance of a quantitative sensory panel members, non-members AW/12 ISO 11238:2012 Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated information on substances members, non-members IST/35 ISO 11239:2012 Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging members, non-members IST/35 ISO 11240:2012 Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of units of measurement members, non-members IST/35 ISO :2012 (Edition 2) Soil quality. Effects of pollutants on earthworms. Determination of acute toxicity to Eisenia fetida/eisenia andrei members, non-members EH/4 Will not be implemented as a British Standard ISO :2012 (Edition 2) Soil quality. Effects of pollutants on earthworms. Determination of effects on reproduction of Eisenia fetida/eisenia andrei members, non-members EH/4 Will not be implemented as a British Standard ISO 11615:2012 Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated medicinal product information members, non-members IST/35 ISO :2012 Measurement of radioactivity in the environment. Air: radon-222. Methodologies for initial and additional investigations in buildings members, non-members NCE/2 Will not be implemented as a British Standard ISO :2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Start temperature of the curing reaction members, non-members STI/10 ISO :2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Glass transition temperature members, non-members STI/10 ISO/TS 12025:2012 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols members, non-members NTI/1/-/2 ISO/TS 12869:2012 Water quality. Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qpcr) members, non-members EH/3/4 ISO/IEC TR :2012 Information technology. Interoperability with Assistive Technology (AT). Windows accessibility application programming interface (API) members, non-members ICT/-/6 ISO 13119:2012 Health informatics. Clinical knowledge resources. Metadata members, non-members IST/35 ISO 13199:2012 Stationary source emissions. Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes. Non-dispersive infrared analyser equipped with catalytic converter members, non-members EH/2/1 Will not be implemented as a British Standard ISO 13293:2012 Recreational diving services. Requirements for gas blender training programmes members, non-members SVS/2/4 ISO 13666:2012 (Edition 2) Ophthalmic optics. Spectacle lenses. Vocabulary members, non-members CH/172/3 ISO/IEC :2012 (Edition 2) Information technology. Software measurement. Functional size measurement. Guide for use of ISO/IEC series and related International Standards members, non-members IST/15 ISO 14268:2012 (Edition 2) Leather. Physical and mechanical tests. Determination of water vapour permeability members, non-members TCI/69 ISO 14603:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature members, non-members RPI/13 ISO 14629:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders members, non-members RPI/13 ISO/IEC :2012 Information technology. Control network protocol. Protocol stack members, non-members IST/6 Will not be implemented as a British Standard Update Standards December 2012 Prices may be subject to change. 61

62 ISO Publications continued... ISO/IEC TR : Systems and software engineering. Systems and software assurance. Concepts and vocabulary CORRIGENDUM 1:September 2012 to ISO/IEC TR :2010 IST/15 ISO/IEC :2012 (Edition 2) Information technology. Multimedia content description interface. Query format members, non-members IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/TS :2012 Earth-moving machinery. Machine control systems (MCS) using electronic components. Use and application of ISO members, non-members B/513/1 ISO/TR 16344:2012 Energy performance of buildings. Common terms, definitions and symbols for the overall energy performance rating and certification members, non-members B/540/8 ISO 16548:2012 Ships and marine technology. Ship design. General guidance on emergency towing procedures members, non-members SME/32/-/8 ISO :2012 Respiratory protective devices. Methods of test and test equipment. Determination of particle filter penetration members, non-members PH/4 Will not be implemented as a British Standard ISO/TR 17068:2012 Information and documentation. Trusted third party repository for digital records members, non-members IDT/2/17 ISO/TR :2012 Graphic technology and photography. Colour characterization of digital still cameras (DSCs). Considerations for determining scene analysis transforms members, non-members CPW/42 ISO :2012 Respiratory protective devices. Performance requirements. Thread connection members, non-members PH/4 ISO :2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement. General members, non-members PRI/88/2 ISO :2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement. Pipes members, non-members PRI/88/2 ISO :2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement. Fittings members, non-members PRI/88/2 ISO 18752:2012 (Edition 2) Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification members, non-members PRI/66 ISO/IEC 19752: Information technology. Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components CORRIGENDUM 1:September 2012 to ISO/IEC 19752:2004 IST/3 Will not be implemented as a British Standard ISO/IEC : Information technology. MPEG systems technologies. Common encryption in ISO base media file format files AMENDMENT 1:November 2012 to ISO/IEC : members, non-members IST/37 ISO/IEC : Information technology. MPEG audio technologies. Unified speech and audio coding CORRIGENDUM 1:September 2012 to ISO/IEC :2012 IST/37 Will not be implemented as a British Standard ISO 24611:2012 Language resource management. Morphosyntactic annotation framework (MAF) members, non-members TS/1 ISO/IEC 24711: Method for the determination of ink cartridge yield for colour inkjet printers and multifunction devices that contain printer components CORRIGENDUM 1:September 2012 to ISO/IEC 24711:2007 IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements members, non-members IST/15 ISO/IEC 25041:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Evaluation guide for developers, acquirers and independent evaluators members, non-members IST/15 ISO/TR 26999:2012 Intelligent transport systems. Systems architecture. Use of process-oriented methodology in ITS International Standards and other deliverables members, non-members EPL/278 ISO/TS 28923:2012 (Edition 2) Agricultural machinery. Guards for moving parts of power transmission. Guard opening with tool members, non-members AGE/32 Will not be implemented as a British Standard ISO/TS 29584:2012 Glass in building. Pendulum impact testing and classification of safety glass for use in buildings members, non-members B/520 ISO/PAS PUBLICATIONS ISO/PAS 18215:2012 Ships and marine technology. Vessel machinery operations in polar waters. Guidelines members, non-members SME/32/-/3 62 Update Standards December 2012 Prices may be subject to change.

63 How it works? Directives, Decisions or Proposals, Acts of Parliament, Statutory Instruments and The two types of legislation available are: Environmental and Health and Safety Ideal for BS EN ISO Ideal for BS OHSAS year year per annum 3 year per annum Unlimited access throughout the contract term. Auto updates as and when new legislation is released. Free Trial Available For more information or to purchase please contact: Tel electronic.products@bsigroup.com Fax BSI Knowledge Centre your standards resource BSI Knowledge Centre provides the following services to BSI members: information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Contact us to arrange a visit to view and purchase in PDF and hardcopy bsigroup.com/withdrawnus1212 For more information contact the BSI Knowledge Centre: Tel Fax knowledgecentre@bsigroup.com bsigroup.com/knowledgecentreus1212

64 NEW Revised code of practice for portable fire extinguishers has just published; make sure you are making the right decisions on the selection and positioning in your premises. Portable fire extinguishers are valuable in the early stages of fire when their portability and immediate availability for use by one person enable a prompt attack to be made. Well maintained and professionally installed fire extinguishers are fundamentally safe and easy to use. Research has shown that extinguishers are successful in a significant number of fires each year and make a major contribution to first aid fire safety. BS : Fire extinguishing installations and equipment on premises Part 8: Selection and positioning of portable fire extinguishers Code of practice, gives advice and guidance on the suitability and positioning of portable fire extinguishers, primarily those conforming to BS EN 3. These are designed to be carried by one person and are used for the protection of buildings, contents, and assist evacuation. The recommendations of this part of BS 5306 are intended to assist the person(s) responsible for the safety of the building in planning to control the consequences of possible fires. Full revision This is a full revision of the standard, and introduces the following principal changes: Recognition of changes in relevant legislation Recommendations added on environmental impact Information on the use of powder revised Clarification on the requirements for class A hazards Changes in the recommendations for class B and class C hazards Erroneous reference to class E removed References to fire blankets removed Travel distances revised Changes to the recommendations on signs Calculation examples updated Advice on reducing vandalism added Recommendations added on the preservation of service information Advice added on extinguisher discharge characteristics. For more information please visit: shop.bsigroup.com/bs5306-8us1212 To contact us visit shop.bsigroup.com/bs5306-8us1212 or contact Customer Services quoting marketing reference code bs5306-8us1212 T F orders@bsigroup.com shop.bsigroup.com/bs5306-8us1212 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012