HRX Technical Manual. Version 1.2

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HRX Technical Manual. Version 1.2"

Transcription

1 HRX 5000 Technical Manual Version 1.2

2 Contents: Specification...2 Connectors...5 RS-485 Network Connectors (J6 and J7)...5 RS-232 to Printer (J19)...6 RS-232 to PC (J8)...7 TCP/IP...8 Power (J21)...9 Fire Alarm Input (J20)...10 Relays (J12, J15)...11 Remote Readers (J13, J16)...12 Remote Door Inputs (J14, J17)...13 Modem (J3)...14 Access Control...15 Fire Alarm Interaction...16 Bells...16 Fire Alarm Printer...16 Issue History...18 HRX5000 Technical Manual V1.2 Page 1 of 18

3 Specification The HRX 5000 is a Proximity card reading terminal with TCP/IP connection, Fire Alarm printout, Access Control for 2 doors and optional internal Modem. HRX5000 Technical Manual V1.2 Page 2 of 18

4 Dimensions: Display: Clockings: Employees: Firmware: Configuration: 280mm (W) X 170mm (H) X 60mm (D) 16 X 2 Large character LCD with LED Backlight Display area: 100mm X 25mm 15,000 in circular buffer 25 to 1,000, remotely upgradeable Flash memory upgradeable over TCP/IP 1 Master, up to 15 Slaves Reader: Type: 125KHz HID type Range: 80mm (ISO & Clamshell badges) 30mm (Keyfobs) Battery Backup: Enclosure: Weight: UPS: Lithium battery for data and clock for 3 years Material Flame retardant ABS IP rating standard purchase is unsealed Optionally sealed to IP66 (hosedown) 1 KG. Optional external HRX5000 Technical Manual V1.2 Page 3 of 18

5 Connections: Power 9-12v DC 350mA to 500mA TCP/IP 10/100 Base-T RS/232 Second, alternative, PC connection RS485 Slave clocks. 2 connectors for buss RS232 Fire Alarm printer Digital IN Fire Alarm Panel Remote Reader A 8 core up to 50 metres Relay A SPCO up to 250V 0.5A Door Ajar A From magnetic contact Egress A From egress button Remote Reader B 8 core up to 50 metres Relay B SPCO up to 250V 0.5A Door Ajar B From magnetic contact Egress B From egress button Modem Line connector Modem Options: Power Supply: Internal PSTN type Internal GSM type (data SIMM contract required) Wall Mount IN: 240V AC OUT: 9V DC 95mm X 45mm X 25mm HRX5000 Technical Manual V1.2 Page 4 of 18

6 Connectors RS-485 Network Connectors (J6 and J7) J6, J7 Pin Signal Direction 1 -ve In/Out 2 +ve In/Out 3 4 Screen J6 J7 A Master HRX5000 is able to communicate with up to 15 Slave HRX5000s (or HRX3000s) over a twisted pair RS-485 bus. 2 connectors are fitted in each clock to make wiring easier in the field. End to end cable length can be up to 1Km. The cable required is single twisted pair with shield. A suitable cable is Belden 9501 which is 24 awg (7X32) stranded, single twisted pair with shield, PVC insulation. The RS Part Number is for 1 box of 304 metres at 75. J6 and J7 are connected pin to pin on the PCB. I.e. J6 pin 1 connects to J7 pin 1 etc. To connect 2 units together, wire pin 1 to pin 1 and pin 2 to pin 2. Keep the screen pigtail as short as possible. HRX5000 Technical Manual V1.2 Page 5 of 18

7 RS-232 to Printer (J19) J19 Pin Signal Direction Printer DB-25 Notes 1 Power Out 5-9 volts available to power an external line driver. Current limited to approx 50mA 2 TXD Out RXD pin 3 Transmit data baud, 8 data, 1 stop, no parity 3 RXD In RTS pin 20 Hardware handshake from printer. Connect to Printer RTS (Output) signal 4 0V 0V pin 7 Signal Ground J19 The terminal uses an RS-232 output to a printer for the Fire Alarm evacuation reports. The report is triggered by a contact closure on the Fire Alarm Input. It can also be initiated from the PC. The data format of the transmitted data to the printer is: 9600 baud, 8 Data bits, 1 Stop Bit, No Parity. Using the Focus Software it is possible to command test printouts to be sent from the Terminal to the printer. It is also possible to inspect the state of the Printer's hardware handshake line. See menu option System Fire Alarm. HRX5000 Technical Manual V1.2 Page 6 of 18

8 RS-232 to PC (J8) J8 Pin Signal Direction Notes 1 Power Out 5-9 volts available to power an external line driver. Current limited to approx 50mA 2 TXD Out Transmit data. 19,200 baud, 8 data, 1 stop, no parity 3 RXD In Receive data. 19,200 baud, 8 data, 1 stop, no parity 4 0V Signal Ground J8 The terminal can communicate with the PC either by TCP/IP, RS-232 or Modem. The connection method is set up in the Focus System Clock Utilities Connection Setup screen. Here you specify a terminal name and a connection method. Connections: Pin Signal Direction PC 9 Way PC 25 Way 1 Power Out 2 TXD Out RXD (pin 2) RXD (pin 3) 3 RXD In TXD (pin 3) TXD (pin 2) 4 0V 0V (pin 5) 0V (pin 7) HRX5000 Technical Manual V1.2 Page 7 of 18

9 TCP/IP TCP/IP The TCP/IP connection supports Ethernet 10/100 Base-T. The IP address of the unit is set up via the Focus software using the System Clock Utilities TCP/IP Tab. A password is required to modify the TCP/IP address of the unit as inadvertent changes will cause loss of communication. You would normally modify the IP Address by communicating over the RS232 cable from the PC. HRX5000 Technical Manual V1.2 Page 8 of 18

10 Power (J21) J21 Pin Signal Direction Notes 1 0V Signal Ground connected to pin 2 2 0V 3 +ve In 9-12 volts DC at up to 500mA 4 +ve In Connected to Pin 3 J21 The unit requires 9 to 12 volts DC at up to 500mA depending on configuration. The unit is protected internally against reverse polarity connection. HRX5000 Technical Manual V1.2 Page 9 of 18

11 Fire Alarm Input (J20) J20 Pin Signal Direction Notes 1 FA In Fire Alarm Input 2 0V Signal Ground 3 FA In Connected internally to Pin 1 4 0V Connected internally to Pin 2 J20 The Fire Alarm Input triggers the Fire Evacuation Report to be printed via the RS-232 printer port. A voltage free pair of contacts triggers the report on contact closure. The connections are doubled up on the connector with Pins 1 and 3 connected and Pins 2 and 4 connected. If desired, a push button switch can be connected to one pair and the Fire Alarm panel connected to the other pair. This will give a manual test or trigger input. Pins 1 and 3 will normally show +5 volts with both inputs open circuit. HRX5000 Technical Manual V1.2 Page 10 of 18

12 Relays (J12, J15) J12, J15 Pin Signal Direction Notes 1 NC In/Out Normally Closed Contact 2 C In/Out Common Contact 3 NO In/Out Normally Open Contact J12 J15 The two relays each provide one set of changeover contacts for operating a door release mechanism or a sounder. The contacts are rated at up to 240 volts AC 100mA, or 12V DC 2 Amps. The contacts are protected internally by transient suppressing Varistors. HRX5000 Technical Manual V1.2 Page 11 of 18

13 Remote Readers (J13, J16) J13, J16 Pin Signal Colour Direction Required 1 9 Volts Red In Yes 2 Card Load Signal Violet In 3 Signal Ground Black Yes 4 Data Green In Yes 5 Clock White In Yes 6 Green LED Orange Out Yes 7 Red LED Brown Out 8 Sounder Yellow Out NB: Pin 1 located at the TOP of the connector J13 J16 Recommended cable for extending the reader distance: Belden 9538 which is 8 core 24 awg (7X32) with overall screen. RS Part number is for 304 metres at 175. HRX5000 Technical Manual V1.2 Page 12 of 18

14 Remote Door Inputs (J14, J17) J14, J17 Pin Signal Direction Notes 1 AJAR In Door Ajar 2 0V 3 EXIT In Exit Pushbutton 4 0V J14 J17 Pin 1 and 2 connect to a normally closed door sensor such as a magnetic reed contact. The contacts open when the door opens. With the contacts open there is a 5 volt signal present on Pin 1. Pin 3 and 4 connect to a Door Exit pushbutton. These contacts are normally open when there will be a 5 volt signal on Pin 3. Egress timing is carried out by the software in the terminal. HRX5000 Technical Manual V1.2 Page 13 of 18

15 Modem (J3) Modem J3 The unit can accept a plug in Modem which sits underneath the LCD. The footprint is compatible with a PSTN landline modem or a GSM radio modem. The PSTN Modem connects to the phone line via J3 which is a standard modem line socket. The GSM modem has a flying lead connecting to an aerial which, for best results, should be mounted remotely from the clocking terminal itself. HRX5000 Technical Manual V1.2 Page 14 of 18

16 Access Control The HRX5000 supports Access Control for 2 Doors. Two independent groups of connectors allow for connection to: 1. Proximity reader; 2. Door release device (latch or magnet) driven by a built in changeover relay; 3. Door open sensor; 4. Door Exit button. Each relay has an alternative use as a bell actuator. 1. Proximity Reader. With the recommended minimum 5 wire connection the LED/Sounder sequence is as follows: LED Sounder Indicating Idle Red Power ON Card Presented Flashes GREEN Beeps Card read If Access Granted Relights GREEN Access Grant for the duration the Door is released If Access Denied Remains RED Access Deny 2. Door Release. The contacts are rated at up to 240 volts AC 100mA, or 12V DC 2 Amps. The contacts are protected internally by transient suppressing Varistors. 3. Door Open sensor. Connects to a set of contacts that are closed when the door is closed (such as a magnetic reed switch). These contacts are monitored and can initiate a Door Forced Alarm and a Door Ajar Alarm. 4. Door Exit switch. Connect a Normally Open push button to this input to release the door for a predetermined interval. When the contacts close (button pressed) the door relay will operate (door released). When the contacts open (button released) the Door Release timer starts. This can be set from the Focus software Access Control Doors screen. At the end of the timeout period the relay will de-energise, locking the door. HRX5000 Technical Manual V1.2 Page 15 of 18

17 Master/Slave systems In a Master/Slave configuration, the master holds all the Door Rules and the Access Rules as well as the Access Clocking Records. The Access Clocking records are downloaded at the same time as the Time and Attendance Records. The Master holds: 20 Door Rules 100 Access Rules 100 Access Groups 10,000 Time & Attendance and Access clockings Fire Alarm Interaction Each door can be individually programmed to unlock on Fire Alarm activation. This is carried out by setting the Fire Alarm Release timer in the Door Definition within Focus Clock Utilities. Bells The HRX5000 holds up to 20 Bell time records that can be shared between the 2 relays. Each record specifies: The relay 1 or 2 The activation time in hours and minutes (no seconds) The duration in seconds (up to 60 seconds) The days of the week on which the rule applies. Fire Alarm Printer The terminal uses RS-232 to send data to the fire alarm printer. This enables a dedicated cable to be used (rather than using the network infrastructure) and distances of around 50 metres can be achieved. The printer must be capable of printing 'Raw Text'. Many printers only work when driven by an application using Windows or similar printer drivers. Before sourcing a printer ensure it can print raw text and has either an RS-232 interface (preferable) or a 'parallel Centronics' interface (also referred to as IEEE 1284 Bi-directional parallel). HRX5000 Technical Manual V1.2 Page 16 of 18

18 Recommended Printer: OKI B4250 Mono Laser plus optional serial RS-232 interface. Source If the printer does not have a serial interface it is possible, though less convenient, to use an external Serial-to-Parallel converter. This must be capable of converting serial data in the format 9600 Baud, 8 data bits, 1 Stop bit to Parallel data. One such converter is the 'Autostop' or SPC-10 converter. This requires an external power supply delivering 9 to 12 volts AC or DC. If DC is used the polarity on the connector must be observed, which is NEGATIVE TO THE TIP. Wire the 25 way connector in accordance with the table for J19. In normal operation, all the DIP switches on the converter should be OFF, giving the correct baud rate and word format for the terminal. Note that it is not possible to interface to a printer USB port. HRX5000 Technical Manual V1.2 Page 17 of 18

19 Issue History Issue Date Firmware Focus Changes V1.0 July 2006 Original Issue V1.1 11/9/ Access Control and Bells Descriptions Added V1.2 29/9/2006 Fire Alarm printer details added. HRX5000 Technical Manual V1.2 Page 18 of 18

HRX3000. Technical Manual

HRX3000. Technical Manual HRX3000 Technical Manual Contents: Specification...2 Connectors...3 Power (J21)...3 RS-485 Network Connectors (J6 and J7)...4 RS-232 to PC (J8)...5 Printer and Fire Alarm Panel (J19)...6 TCP/IP...8 Modem

More information

UNC100 Integra Manual

UNC100 Integra Manual UNC100 Integra Manual New Generation Building Security July 30, 2014 V1.2 Copyright Notice Copyright 1995-2014 by All rights reserved Worldwide. Printed in Canada. This publication has been provided pursuant

More information

Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE

Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE Centaur TM II Cube Slave Alarm Signalling Equipment INSTALLATION GUIDE General Description This guide provides a summary for installing and configuring the Centaur TM Cube Slave Alarm Signalling Equipment

More information

USER MANUAL FOR OPERATING SYSTEM

USER MANUAL FOR OPERATING SYSTEM P2262 ALARM PANEL USER MANUAL FOR OPERATING SYSTEM 21765-07 September 1999 Associated Controls (Aust) PTY. LTD. 29 Smith Street, Hillsdale, NSW, 2036. PH (02) 9311 3255, FAX (02) 9311 3779 Page 1 of 177

More information

P2267 NETWORK INTERFACE

P2267 NETWORK INTERFACE P2267 NETWORK INTERFACE USER MANUAL FOR OPERATING SYSTEMS: 22031-03 23636-01 October 2009 Associated Controls (Australia) Pty. Limited 2-4 Norfolk Road Greenacre, NSW, 2190. PH +61 2 9642 4922, FAX +61

More information

Networked Access Control Panel. Installation Guide

Networked Access Control Panel. Installation Guide XP2M Networked Access Control Panel V1.0X Installation Guide X P 2 M A C C E S S C O N T R O L S Y S T E M Installation Guide Document Ref: PLAN XP2M Installation Guide V4(G)2010 Access Control Services

More information

Controllers. Centralization of Access Control Devices Made Easy. Installer Guide

Controllers. Centralization of Access Control Devices Made Easy. Installer Guide Controllers Centralization of Access Control Devices Made Easy Installer Guide CONTENTS 1 INTRODUCTION 3 The Overview of Hardware 5 The Overview of Installation & Communications 7 Installations with door

More information

Ethernet General Purpose

Ethernet General Purpose Ethernet General Purpose Technical Manual Revision 1.03 8 November 2013 Pakton Technologies IO PAE224 Ethernet GPIO Manual.docx Page 1 of 22 Revision 1.03 Last updated 8/11/2013 Table of Contents INTRODUCTION...3

More information

Revision November 2013 JVA Technologies. Ethernet General Purpose IO Technical Manual

Revision November 2013 JVA Technologies. Ethernet General Purpose IO Technical Manual Revision 1.03 8 November 2013 JVA Technologies Ethernet General Purpose IO Technical Manual www.jva-fence.com.au Table of Contents INTRODUCTION...3 Scope and Purpose...3 Glossary...3 SPECIFICATIONS...4

More information

ARCHITECTURAL DOOR HARDWARE KEY PADS & CARD READERS CATALOG

ARCHITECTURAL DOOR HARDWARE KEY PADS & CARD READERS CATALOG ARCHITECTURAL DOOR HARDWARE KEY PADS & CARD READERS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index KEY PADS & CARD READERS Heavy

More information

The system should also be capable of recording events automatically on any compatible DVR and should be able to retrieve recordings based on events.

The system should also be capable of recording events automatically on any compatible DVR and should be able to retrieve recordings based on events. 0BThe System The Security Management System should be capable of Controlling and Monitoring Access through the doors, Monitor and control Inputs and Outputs, include an Integrated Video Badging, Integrate

More information

SC-F3G User Manual 1.0

SC-F3G User Manual 1.0 SC-F3G User Manual 1.0 Table of Contents 1. Introduction... 3 2. Functions... 3 3. Features... 3 4. Package Contents... 3 5. Device Configuration... 4 6. Status LED signals... 5 7. Before You Start...

More information

T4000 Security Communicator

T4000 Security Communicator Inner Range T4000 Security Communicator 1 T4000 Security Communicator by Inner Range P/N: 998530 / 998530NZ 998530LT (Lite Version) Installation & Operation Manual. Rev: 1.5 Inner Range Pty. Ltd. www.innerrange.com

More information

21-light Remote Annunciator. Owner s Manual

21-light Remote Annunciator. Owner s Manual 21-light Remote Annunciator Owner s Manual Annunciator Description... Inside Font Cover Detailed Specifications... 1 Environmental Specifications... 1 Power Supply Requirements... 1 Communication With

More information

HARDwired Installation/ Owner s Manual

HARDwired Installation/ Owner s Manual HARDwired Installation/ Owner s Manual Use this manual for circuit - Revision L or higher. For Models:,, and Multi-Door Access Controller Wiegand Compatable --R-- Provides Access Control System to manage

More information

Model A1700 Series Annunciator

Model A1700 Series Annunciator Seekirk Model A1700 Series Annunciator Applications: For usage in all types of process industries, electric generation, transmission and distribution, gas and water utilities. Features: The Seekirk model

More information

General Purpose IO Technical Manual

General Purpose IO Technical Manual General Purpose IO Technical Manual Revision 1.06 8 November 2013 Pakton Technologies PAE222 GPIO Manual.docx Page 1 of 21 Revision 1.06 Last updated 8/11/2013 Table of Contents INTRODUCTION...3 Scope

More information

CARD ACCESS CONTROL SYSTEM

CARD ACCESS CONTROL SYSTEM SECTION 13851 CARD ACCESS CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes: A complete, operable, tested, integrated proximity access control system, to operate on a proximity principle where

More information

InBio X60 Series Access Control Panel User Manual

InBio X60 Series Access Control Panel User Manual InBio X60 Series Access Control Panel User Manual Version: 1.4 Date: Nov., 2015 About This Manual This manual introduces the installation connection and user manual of the InBio X60 Series Access Control

More information

Pipo Communications. Model ST-888. DTMF ANI/ENI Display Decoder

Pipo Communications. Model ST-888. DTMF ANI/ENI Display Decoder Pipo Communications Model ST-888 DTMF ANI/ENI Display Decoder 1516 Cassil Place Hollywood, California 90028-7106 Phone: 323-466-5444 Fax: 323-466-1520 www.pipo.cc Manual # 68-9888 May 1, 2002 Rev. 5/02

More information

SCR100 User Manual. Version:1.1 Date:Dec 2009

SCR100 User Manual. Version:1.1 Date:Dec 2009 SCR100 User Manual Version:1.1 Date:Dec 2009 Introduction: This document mainly introduces the installations and connections of SCR100 products, and the brief operations about attendance software. Important

More information

Model A2100 Series Annunciator

Model A2100 Series Annunciator Seekirk Model A2100 Series Annunciator Applications: For usage within transformers, switchgear, breakers and/or within any processing equipment or control room applications either attended or unattended

More information

KT-100 Door Controller

KT-100 Door Controller WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully

More information

Installation Guide for inbiox60 Series Access Control Panel

Installation Guide for inbiox60 Series Access Control Panel Installation Guide for inbiox60 Series Access Control Panel Version: 1.0 Date: April, 2011 About This Manual This manual is a guide to installation and connection of the inbiox60 series access control

More information

Fratech Multipath-IP

Fratech Multipath-IP Rev 2.0 (May 2013) Installer Manual 1 Current Part Numbers: Fratech Multipath-IP E-Link STU PCB & Accessory Kit only In Metal Enclosure with Power Supply 998325-PK 998325-XS Installer Manual This document

More information

Eclipse Nursecall Systems Ltd. Clipper Plus & Clipper ID. Document V.2.1b (Basic) ENS. Freedom Through Technology

Eclipse Nursecall Systems Ltd. Clipper Plus & Clipper ID. Document V.2.1b (Basic) ENS. Freedom Through Technology Ltd. Clipper Plus & Clipper ID Document V..b (Basic) ENS Freedom Through Technology Contents Terms of the document... 3 Introduction... 3 Network and wiring... Global Wiring architecture... Power... 5

More information

600 Range Dialer Installation Manual. Version 1.0

600 Range Dialer Installation Manual. Version 1.0 600 Range Dialer Installation Manual Version 1.0 The information contained is supplied without liability for any errors or omissions. No part may be reproduced or used except as authorised by contract

More information

PAC Portico 2200/1200 Series Door Controllers

PAC Portico 2200/1200 Series Door Controllers Installation Guide January 2003 15263 Ver 2.1 DRAFT E PAC Portico 2200/1200 Series Door Controllers Copyright and Protective Notices 1. The copyright of this document and the associated drawings is the

More information

Carbon Monoxide Transmitter

Carbon Monoxide Transmitter Introduction The CO Transmitter uses an electrochemical sensor to monitor the carbon monoxide level and outputs a field-selectable 4-20 ma or voltage signal. The voltage signal may also be set to 0-5 or

More information

TX3 Series TX3-CX-1. Installation Manual

TX3 Series TX3-CX-1. Installation Manual TX3 Series TX3-CX-1 Installation Manual Version 0 TX3-CX-1 Installation Manual 1 LT-6618 Copyright October 2017 Copyright October 2017 Mircom Inc. All rights reserved. Mircom TX3-CX-1 Installation Manual

More information

Integrated Security Solutions

Integrated Security Solutions Integrated Security Solutions Table of Contents Control Panels 4 Keypads 8 Communication Modules 16 I/O Expanders 20 Door Control 24 Home Automation 25 RF Receivers 26 3 Our integrated security solutions

More information

GLOBAL. InstallatIon & operation manual

GLOBAL. InstallatIon & operation manual InstallatIon & operation manual INDEX 1. INTRODUCTION... 5 2. FEATURES AND FUNCTIONS 2.1 Reporting Options... 2.2 Interfaces... 2.3 Programming... 2.4 Indicators and Controls...... 6 6 6 6 6 3. INSTALLATION...

More information

CV-350 TCP/IP Access Control System. System Overview

CV-350 TCP/IP Access Control System. System Overview CV-350 TCP/IP Access Control System System Overview July 2015 Open Product Access Camden delivers the power of advanced IP access control differently than our competitors! - All product sales exclusively

More information

G SERIES: Security INTEGRATION as you want it. Greater expansion, communication, video integration, system resilience, and automation.

G SERIES: Security INTEGRATION as you want it. Greater expansion, communication, video integration, system resilience, and automation. G SERIES: Security INTEGRATION as you want it Greater expansion, communication, video integration, system resilience, and automation. G Series Integrated Security Solution Fire Intrusion Access Greater

More information

PTE0705 Electric Fence Monitor

PTE0705 Electric Fence Monitor PTE0705 Electric Fence Monitor The JVA logo is a registered trademark of JVA Technologies. JVA Technologies. TABLE OF CONTENTS DESCRIPTION... 2 QUICK START GUIDE... 3 FEATURES... 4 EXPLANATION OF TERMS...

More information

NU2 Smart Power Supply (SPS) Manual

NU2 Smart Power Supply (SPS) Manual GENERAL The Smart Power Supply (SPS) is an innovative Quad Output, field programmable power supply. Each of the four outputs can provide four Amps for a total of sixteen Amps in either 12VDC or 24VDC.

More information

EverAccess. User Manual. Volume

EverAccess. User Manual. Volume EverAccess User Manual Volume 1 Flex Series Controller EFC-02-1A EVERFOCUS ELECTRONICS CORPORATION EFC-02-1A Instruction Guide 2004 Everfocus Electronics Corp 1801 Highland Ave Duarte CA 91010 Phone 626.844.8888

More information

IRIS Touch Firmware Enhancements and Additions from Version to Version

IRIS Touch Firmware Enhancements and Additions from Version to Version Overview IRIS Touch Firmware Enhancements and Additions from Version 1.14.3 to Version 1.19.1 This document details enhancements to the feature set of the IRIS Touch from firmware Version 1.14.3 to Version

More information

EC-P Zone Intruder Alarm System

EC-P Zone Intruder Alarm System EC-P10 10-20 Zone Intruder Alarm System Installation Manual Contents 1. System Overview... 4 System Configuration... 4 Control Panel... 5 Remote Keypads... 5 EC-LED Remote Keypad... 5 EC-LCD Remote Keypad...

More information

PRODUCT CATALOGUE. Cape Town 18 Darter Road Blue Water Estate Kommetjie. Gauteng 245 Louis Botha Avenue Orchards Johannesburg

PRODUCT CATALOGUE.   Cape Town 18 Darter Road Blue Water Estate Kommetjie. Gauteng 245 Louis Botha Avenue Orchards Johannesburg PRODUCT CATALOGUE Cape Town 18 Darter Road Blue Water Estate Kommetjie Luke Fowles - 076 161 8124 luke@providenttech.co.za Frank Fowles - 082 445 1541 frank@providenttech.co.za www.providenttech.co.za

More information

Application Version: 2.0 and above Date Written: 03/09/2010. Copyrights , Global Security Devices, All Rights Reserved

Application Version: 2.0 and above Date Written: 03/09/2010. Copyrights , Global Security Devices, All Rights Reserved GSD WIN USER MANUAL Application Version: 2.0 and above Date Written: 03/09/2010 Copyrights - 2010-2012, Global Security Devices, All Rights Reserved TABLE OF CONTENTS TABLE OF CONTENTS...2 SETTING UP A

More information

IRIS Touch Quick Installation & Maintenance Guide. Version 1.0

IRIS Touch Quick Installation & Maintenance Guide. Version 1.0 IRIS Touch Quick Installation & Maintenance Guide Version 1.0 Page 2 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.0 Contents 1. Introduction... 4 2. Product Features... 4 3. Package

More information

OPERATION & INSTALLATION MANUAL FOR ALARM PANEL M2AP01

OPERATION & INSTALLATION MANUAL FOR ALARM PANEL M2AP01 OPERATION & INSTALLATION MANUAL FOR ALARM PANEL M2AP01 Table of Contents Safety Instructions 4 Owner/Operator Responsibility 4 Specifications 5 Introduction 6 Installation Instructions 7 Setup 7 Wiring

More information

Fire Extinguishing Control Panel INSTRUCTION MANUAL. Revision 8/ Instruction Manual Page 1 Revision 8/01.17 of 63

Fire Extinguishing Control Panel INSTRUCTION MANUAL. Revision 8/ Instruction Manual Page 1 Revision 8/01.17 of 63 Fire Extinguishing Control Panel FS5200Е INSTRUCTION MANUAL Revision 8/01.17 Instruction Manual Page 1 1. 2. 3. 4. 4.1. 4.2. 4.2.1. 4.2.2. 4.2.3. 4.2.4. 4.2.5. 4.2.6. 4.2.7. 4.2.8. 4.2.9. 4.2.10. 4.2.11.

More information

Installation Manual GalaXy G2 / G3 / GD. o Settings GalaXy o Linking with iprotect o Keymap

Installation Manual GalaXy G2 / G3 / GD. o Settings GalaXy o Linking with iprotect o Keymap Installation Manual GalaXy G2 / G3 / GD o Settings GalaXy o Linking with iprotect o Keymap Publication July 2013, Keyprocessor BV Paasheuvelweg 20 1105BJ Amsterdam, The Netherlands www.keyprocessor.com

More information

Sentient. Downloader Manual D4854

Sentient. Downloader Manual D4854 Sentient Downloader Manual D4854 Dycon Ltd Tel: +44 (0)1443 471 060 Fax: +44 (0)1443 479 374 Cwm Cynon Business Park Mountain Ash CF45 4ER - UK www.dyconsecurity.com sales@dyconsecurity.com TABLE OF CONTENTS

More information

TruPortal Wireless Locks Quick Reference

TruPortal Wireless Locks Quick Reference TruPortal Wireless Locks Quick Reference en-us Introduction This document describes how to connect the following wireless locks to TruPortal hardware: Schlage AD-400, which connects to TruPortal hardware

More information

Product Data Sheet. Remote Terminals. Features:

Product Data Sheet. Remote Terminals. Features: Remote Terminals Product Data Sheet Features: Based around two core products, the Mx- 4010 Remote Display Terminal (RDT) and the fully functional Mx-4020 Remote Control Terminal (RCT). Both remote terminals

More information

ACCURATE ELECTRONICS INC

ACCURATE ELECTRONICS INC ACCURATE ELECTRONICS INC Page 1 of 7 Model 108078 2 Sept 09 WWW.ACCURATE.ORG PO BOX 1654 97075-1654 8687 SW Hall Blvd 97008 BEAVERTON OR USA 503.641.0118 FAX 503.646.3903 Practice Section 108078 Rev A

More information

User manual. KNXgal. version

User manual. KNXgal. version User manual version 1.3 gal Management alarm control panels Galaxy from bus powered from bus Communication indication on and with Galaxy control panel DIN rail mount (1 modul) Adjustable address on with

More information

Roo232 User Guide. Revision 1.0. Copyright 2006 RoboDynamics Corp

Roo232 User Guide. Revision 1.0. Copyright 2006 RoboDynamics Corp Roo232 User Guide Revision 1.0-1 - Introduction Roo232 is a level-shifter for connecting a PC directly to the Roomba using the serial port. It is ideal for applications using embedded PCs such as PC104,

More information

A36D/TPSD Modbus TCP SCADA INTERFACE INSTRUCTIONS

A36D/TPSD Modbus TCP SCADA INTERFACE INSTRUCTIONS SCADA INTERFACE INSTRUCTIONS - OPTION 21Q - FOR A36D/TPSD SYSTEMS with 500 and 550 option. A36D/TPSD Modbus TCP SCADA INTERFACE OPTION 21Q INSTRUCTIONS This manual is valid for A36D/TPSD Chargers equipped

More information

REPEATER FS5200R INSTRUCTION MANUAL

REPEATER FS5200R INSTRUCTION MANUAL REPEATER FS5200R INSTRUCTION MANUAL Instruction Manual Page1 CONTENTS 1. Introduction... 3 2. Function... 3 3. Technical data... 3 4. Contents of delivery... 4 5. General information... 5 6. Duty Mode...

More information

Added password for IP setup page : Password must be in IP format!

Added password for IP setup page : Password must be in IP format! NETWORK POWER MONITOR Release : 21 August 2014 Hardware Version : Version 7 Firmware version 1.00 PC Application Software : Version (latest)...2 Added password for IP setup page : Password must be in IP

More information

Setup Instructions. This manual is only valid for A36D/TPSD Chargers. equipped with a 341S control card with P341S0012 or P341S0013 software

Setup Instructions. This manual is only valid for A36D/TPSD Chargers. equipped with a 341S control card with P341S0012 or P341S0013 software La Marche Manufacturing Company www.lamarchemfg.com DNP 3.0 Serial (RS232/RS485) and Ethernet (TCP/IP) SCADA Interface for A36D & TPSD Chargers with S2A-341S and S2A-383S communication cards. Option 21P,

More information

Integrated Security Solutions

Integrated Security Solutions Integrated Security Solutions Table of Contents Control Panels 4 Keypads 8 Communication Modules 16 I/O Expanders 20 Door Control 24 Home Automation 25 RF Receivers 26 2 Our integrated security solutions

More information

C-Bus Pascal Automation Controller 5500PACA. Installation Instructions

C-Bus Pascal Automation Controller 5500PACA. Installation Instructions C-Bus Pascal Automation Controller 5500PACA Installation Instructions Contents 1.0 Description...3 2.0 Important Notes...3 3.0 Capabilities...3 4.0 Wiring Instructions...4 4.1 Battery Back up...5 4.2 Connecting

More information

System Manual W A R N I N G. PC6O1O Software Version 2.1

System Manual W A R N I N G. PC6O1O Software Version 2.1 System Manual W A R N I N G This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual

More information

The system is expanded via the RCC network with each RCC capable of passing information to and from up to 31 detection or output devices.

The system is expanded via the RCC network with each RCC capable of passing information to and from up to 31 detection or output devices. FireCell Radio Hub Fully addressable Wireless activation Third party approved (EN54) 2-way radio communication Loop powered Diagnostics port Range in excess of 150 metres Overview The model FCX-500-001

More information

Grandstream Networks, Inc. GDS3710 Input/output Alarms Configuration Guide

Grandstream Networks, Inc. GDS3710 Input/output Alarms Configuration Guide Grandstream Networks, Inc. Table of Contents INTRODUCTION... 4 GDS3710 WIRING CONNECTION... 5 Powering GDS3710... 5 Power and Data PINs... 5 Connecting Alarm IN and Alarm OUT PINs... 6 Alarm IN Connection

More information

Dry Contact Probe DCP (#30008)

Dry Contact Probe DCP (#30008) Dry Contact Probe DCP (#30008) The Networked Robotics DCP probe enables network data collection of the state of any normally open or normally closed switch. This product can sense alarm contact outputs

More information

All- IN- ONE PROXIMTY STAND ALONE CONTROLLER OPERATION MANUAL MODEL: HA3021 VERSION: 3.60

All- IN- ONE PROXIMTY STAND ALONE CONTROLLER OPERATION MANUAL MODEL: HA3021 VERSION: 3.60 All- IN- ONE PROXIMTY STAND ALONE CONTROLLER OPERATION MANUAL MODEL: HA3021 VERSION: 3.60 HEART ENTERPRISE CO. LTD. HEART ENTERPRISE CO., LTD. 0 Table of Contents Features 2 Specification 3 Wiring Description

More information

ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE

ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE isocket Smart Relay is a complex Smart House system which is installed in the fuse cabinet (electric cabinet) in the house. We therefore assume that

More information

SMARTWIRE MKII INSTALLATION MANUAL HARD-WIRED NURSE CALL SYSTEM. SmartWire MK2 Nurse Call Installation Manual v1.8.doc

SMARTWIRE MKII INSTALLATION MANUAL HARD-WIRED NURSE CALL SYSTEM. SmartWire MK2 Nurse Call Installation Manual v1.8.doc SMARTWIRE MKII HARD-WIRED NURSE CALL SYSTEM INSTALLATION MANUAL 1. CONTENTS 1. CONTENTS...1 2. EQUIPMENT LIST...3 3. INTRODUCTION...4 4. CABLE SPECIFICATION...4 5. COMPONENTS...5 TYPE A (CALL, SOCKET AND

More information

Products no longer available

Products no longer available Technical data sheet MONICO-.. Turnkey automation station MONICO-.. Forms an efficient fire protection system together with the motorisation sets BF(G)24MP Completely wired controller in matching control

More information

AKSolutions Data Sheet April 2007 AK882X RF POWER MONITOR. Description: Features:

AKSolutions Data Sheet April 2007 AK882X RF POWER MONITOR. Description: Features: AK882X RF POWER MONITOR Features:. > Operates from 9-30VDC power input > Installs inline to simplify mounting > Bidirectional sensor automatically detects forward and reflected power, and calculates VSWR

More information

Instruction manual MTL process alarm equipment. October 2016 CSM 725B rev 2 MTL RTK 725B. Configuration Software Manual

Instruction manual MTL process alarm equipment. October 2016 CSM 725B rev 2 MTL RTK 725B. Configuration Software Manual Instruction manual MTL process alarm equipment October 2016 CSM 725B rev 2 MTL RTK 725B Configuration Software Manual SECTION 1 - INTRODUCTION... 5 Basic Requirements... 5 SECTION 2 - SOFTWARE INSTALLATION...

More information

DS7400Xi Addressable Control/ Communicator

DS7400Xi Addressable Control/ Communicator DS7400Xi Addressable Control/ Communicator DS7400Xi DS7400Xi-EXP 110VAC operation 220VAC operation Remotely Programmable WDSRP (Windows Detection Systems Remote Programming Software), allows the systems

More information

A36D/TPSD Modbus RTU (Serial) SCADA INTERFACE INSTRUCTIONS

A36D/TPSD Modbus RTU (Serial) SCADA INTERFACE INSTRUCTIONS SCADA INTERFACE INSTRUCTIONS - OPTION 21S - FOR A36D/TPSD SYSTEMS with option 500 and 550. A36D/TPSD Modbus RTU (Serial) SCADA INTERFACE OPTION 21S INSTRUCTIONS This manual is valid for A36D/TPSD Chargers

More information

Replaceable LED modules. Sleep or unattended mode. Auto-silence and auto-acknowledge

Replaceable LED modules. Sleep or unattended mode. Auto-silence and auto-acknowledge Replaceable LED modules 11 Alarm Sequences as per ISA-18.1 standard Each channel/window fully field programmable RS232 or RS485 MODBUS-RTU communication Repeat relay for each window and multifunction relays

More information

General Routing Interface

General Routing Interface General Routing Interface Features The General Routing Interface Card is an optional module to provide Fire and Fault Routing Outputs compliant with BSEN54-2: 1998 Clauses 7.9 and 8.9 and BS5839-1: 2002.

More information

In installation with more doors, up to 64 central units can be used together, allowing installations of up to 2,048 doors. RECEPTION CAR PARK

In installation with more doors, up to 64 central units can be used together, allowing installations of up to 2,048 doors. RECEPTION CAR PARK Access Control CENTRALISED CAC The CAC (centralised access control ) allows complex installations with several accesses and additional functions. It also makes it possible to integrate other services:

More information

Remote alarm indicator and test combination MK2430

Remote alarm indicator and test combination MK2430 Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 5 35305 Grünberg Tel.: 040 807-0 Fax: 040 807-259 Remote alarm indicator and test combination MK2430 Remote alarm indicator and test combination with LC

More information

Access CONTROL. MANAGEMENT Software

Access CONTROL. MANAGEMENT Software Software Guide Access CONTROL MANAGEMENT Software Engineered to meet today s demands and tomorrow s challenges, Keyscan s System VII software delivers unique features to provide an access control solution

More information

RS485 MODBUS Module 8AI

RS485 MODBUS Module 8AI Version 1.4 15/04/2013 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained in this manual have

More information

D3 Wireless temperature alarm & monitoring system family. tek-troniks

D3 Wireless temperature alarm & monitoring system family. tek-troniks D3 Wireless temperature alarm & monitoring system family tek-troniks D3 Wireless temperature alarm & monitoring system family No server or dedicated pc No ongoing cloud costs or licencing fees. Fully web

More information

CASS9000 Standalone FingerPrint Door Access System. User Manual

CASS9000 Standalone FingerPrint Door Access System. User Manual CASS9000 Standalone FingerPrint Door Access System User Manual CASS9000 COPYRIGHT Information furnished by Cass Technology Sdn. Bhd. is believed to be accurate and reliable. Cass Technology Sdn. Bhd. have

More information

System 57. An advanced World of intelligent gas detection system management

System 57. An advanced World of intelligent gas detection system management An advanced World of intelligent gas detection system management A World of control technology High precision, intelligent control Master / voted alarm options High packing density Flexible I/O configuration

More information

20 Light Remote Annunciator

20 Light Remote Annunciator Light Remote Annunciator Owner s Manual Surface Mount Flush Mount 94-95- Standard Annunciator 94-, 94-95-, 95-4- 4- Annunciator w/remote Relay Panel 4-, 4-4-, 4-49-, 49-49-, 49- Time Multiplexed Annunciator

More information

Analog Room Pressure Monitor RPC Series

Analog Room Pressure Monitor RPC Series Description The Room Pressure Monitor is used to measure differential pressure in the range of 0.125 to 1"wc or 30 to 250 Pa. It combines precision high sensitivity silicon sensing capabilities and the

More information

PERTRONIC INDUSTRIES LTD F4-RMAX Installation Note

PERTRONIC INDUSTRIES LTD F4-RMAX Installation Note Product Overview: The Pertronic F4 Remote LED Mimic / Aux Relay Module F4-RMAX is an optional extra for the Pertronic F4 conventional 4-zone fire alarm panel. This board enables the fire alarm panel to

More information

System 57. An advanced world of intelligent gas detection system management

System 57. An advanced world of intelligent gas detection system management An advanced world of intelligent gas detection system management A world of control technology High precision, intelligent control Master/voted alarm options High packing density Flexible I/O configuration

More information

Installation & User Manual V1.1

Installation & User Manual V1.1 Other products from GSD standalone products GSD also offers fully functional standalone door controls for less complex door management. This attractive design, with modern aesthestics, will complement

More information

Metasys Integrator Vilter Application

Metasys Integrator Vilter Application Metasys Connectivity Technical Manual 629.5 Metasys Integrator Section Application Note Issue Date 1294 APPLICATION NOTE Metasys Integrator Vilter Application lntroduction Page 3 Application Details *3

More information

FIRECLASS Networking. Addressable Fire Alarm Control Panels From Software version 21. Product Application and Design Information FC-A-FCNET-A

FIRECLASS Networking. Addressable Fire Alarm Control Panels From Software version 21. Product Application and Design Information FC-A-FCNET-A FIRECLASS Networking Addressable Fire Alarm Control Panels From Software version 21 Product Application and Design Information FC-A-FCNET-A Doc. version 1 23. March 2012 FIRECLASS. Hillcrest Business Park,

More information

PowerLogic ION Setup Meter Configuration Software Configuration Guide

PowerLogic ION Setup Meter Configuration Software Configuration Guide PowerLogic ION Setup Meter Configuration Software Configuration Guide 70002-0293-03 12/2010 Conventions Used in this Manual This section describes the symbols and terminology used in this guide. Symbols

More information

Intelligent Security & Fire Ltd

Intelligent Security & Fire Ltd full installation, commissioning and operating manuals can be downloaded from www.haes-systems.co.uk combined addressable / conventional fire alarm control panel User Guide Approved Document No. MFBU-04

More information

Inner Range FE3000S. Serial GSM Modem. P/No: INSTALLATION MANUAL

Inner Range FE3000S. Serial GSM Modem. P/No: INSTALLATION MANUAL Revision 1.0 October. 2014 1 Inner Range FE3000S Serial GSM Modem. P/No: 998306 INSTALLATION MANUAL IMPORTANT NOTE: This Installation Manual is only relevant to Serial GSM Modems utilizing the G-Link PCB.

More information

PRODUCT CATALOGUE. Cape Town 18 Darter Road Blue Water Estate Kommetjie. Gauteng 245 Louis Botha Avenue Orchards Johannesburg

PRODUCT CATALOGUE.   Cape Town 18 Darter Road Blue Water Estate Kommetjie. Gauteng 245 Louis Botha Avenue Orchards Johannesburg PRODUCT CATALOGUE Cape Town 18 Darter Road Blue Water Estate Kommetjie Luke Fowles - 076 161 8124 luke@providenttech.co.za Frank Fowles - 082 445 1541 frank@providenttech.co.za www.providenttech.co.za

More information

Installation and Technical Documentation

Installation and Technical Documentation Installation and Technical Documentation Version 01 HOSTED ACCESS CONTROL VOLO is a Trademark of Norbain SD CONTENTS Wiring Diagram... 04 Overview... 05 Connecting the Managed ACU... 05 Configuring the

More information

Instruction Manual Model Backup Switch, 1 for 8

Instruction Manual Model Backup Switch, 1 for 8 Instruction Manual Model 2582-282 Backup Switch, 1 for 8 December 2011, Rev. 0 MODEL 2582 SWITCH CROSS TECHNOLOGIES INC. SWITCH ALARM PSA PSB ALARM OFFLINE ONLINE UNIT STATUS 1 2 3 4 5 6 7 8 BU PROT MODE

More information

Installation, Operating and Maintenance Manual

Installation, Operating and Maintenance Manual STATUS ZONES CONTROLS FIRE FAULT DISABLED FIRE 1 2 3 4 5 6 7 8 TEST FAULT DISABLED 1 5 BUZZER SILENCE RESET 1 2 TEST 2 6 LAMP TEST 3 SUPPLY 3 7 SYSTEM FAULT 4 8 SOUNDERS ACTIVATE/ SILENCE 4 FAULTS INSTRUCTIONS

More information

Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Phone: Fax:

Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Phone: Fax: Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 5 35305 Grünberg Phone: 040 807-0 Fax: 040 807-259 Alarm indicator and test combination MK2430 Remote alarm indicator and test combination with LC display

More information

DYGIZONE GJD910 Lighting Controller & Enunciator

DYGIZONE GJD910 Lighting Controller & Enunciator DYGIZONE GJD910 Lighting Controller & Enunciator MASTER WIRING IDENTIFICATION Power up to the DygiZone and you will see: All the LED s (red,yellow,green and blue buttons) will flash All the LCD icons will

More information

ZXe INTELLIGENT MULTI PROTOCOL FIRE ALARM CONTROL PANEL

ZXe INTELLIGENT MULTI PROTOCOL FIRE ALARM CONTROL PANEL ZXe INTELLIGENT MULTI PROTOCOL FIRE ALARM CONTROL PANEL PRODUCT Specification FEATURES Designed To Meet The Requirements Of EN54 Expandable From 1 To 5 Loops As Standard A Variety Of Networking Options

More information

RMS/RPX Reader. User Manual

RMS/RPX Reader. User Manual RMS/RPX Reader User Manual Copyright Disclaimer Trademarks and patents Intended use FCC compliance Copyright 2005, GE Security Inc. All rights reserved. This document may not be copied or otherwise reproduced,

More information

725B Configuration Software Manual

725B Configuration Software Manual 725B Configuration Software Manual REV DATED DESCRIPTION AUTHOR APPROVED 0 09-03-10 First Issue P.Cartmell Page 1 of 80 SECTION 1 - SOFTWARE INSTALLATION... 5 725B ConfigurationSoftware Installation...

More information

Adaptive CyCLO Technical and HMI User Guide. CyCLO User Guide. Version th December 2017 REV

Adaptive CyCLO Technical and HMI User Guide. CyCLO User Guide. Version th December 2017 REV CyCLO User Guide Version 2.00 19 th December 2017 REV 2.00 1 Contents 1. Hardware... 3 1.1. Introduction... 3 1.2. Electrical Specification... 3 1.3. Board Overview... 4 1.4. Electrical Installation...

More information

Synergis Master Controller 2.2 Integration Guide for Assa Abloy Aperio- Enabled Locks

Synergis Master Controller 2.2 Integration Guide for Assa Abloy Aperio- Enabled Locks Synergis Master Controller 2.2 Integration Guide for Assa Abloy Aperio- Enabled Locks This guide supplements the Synergis Master Controller Configuration Guide and explains how to configure Assa Abloy

More information

ZLM4 OEM Technical Manual

ZLM4 OEM Technical Manual ZLM4 OEM Technical Manual Version 3, June 2014 JVA Technologies Pty Ltd Page 1 of 32 Issue:1/08/2014 10:49:00 AM Contents INTRODUCTION... 4 Scope and Purpose... 4 DRAFT... 4 Features... 5 Limitations...

More information