Terahertz Technologies Inc.

Transcription

1 Advanced Fiber Optic Test Equipment Terahertz Technologies Inc U.S.-OTDRS Clear Rd. Oriskany, NY Domestic: International:

2 Mission Statement: Provide world class test and measurement designs in the industries we serve, including Fiber Optics and Photonics technologies, and to continue with our passion for producing the highest quality equipment solutions in these industries. This is our commitment to excellence for our customers, employees, stakeholders and the communities in which we thrive. A Note From The President: Thank you for visiting our website, and your continued loyalty and support for our company and industries. The founders and team members of TTI have a wealth of experience in the Photonics and Fiber Optics test and measurement industry dating back to the early 1970s when fiber was still in its infancy. After many years of ingenuity and dedication, we founded TTI in 1989 with the purpose of continuing to delight our customers, assist them in finding the best solutions, and keeping abreast of the technologies they deploy. While our roots are in the Mohawk Valley Fiber Optic Industry of central New York, our reach is global, and we pride ourselves in being a world-class producer of the high tech solutions our customers require. Our technology and product development experiences include design and marketing the world s first commercial processor driven Optical Time Domain Reflectometer. Other historic developments include Radiometric Energy and Power Meters, Optical Choppers, Space Probe Mission Sensors, and the industry standard Electrically Calibrated Pyroelectric Radiometer. Over the decades we continued developing and refining our technologies with recent introductions in our full line of fiber optic test equipment including state-of-the-art Optical Time Domain Reflectometers, hand-held Optical Spectrum Analyzers, CWDM Channel Analyzers, Tunable Laser Sources and advanced autotest/autowave Loss Test Sets. We also have a full line of optical to electrical converters, fiber optic links and a fiber optic video link system. We offer an optical chopper, laser power and energy meter, a fiber optic laser tachometer, photodiode transimpedance amplifier, and various other custom opto-electronic products that are utilized in the automotive, fiber optics, communications, photonics, power generation and medical equipment industries and for research laboratories, government entities and educational organizations worldwide. Through our experiences, the principle engineers at TTI are proud to have amassed over 100 years of combined experience in photonics and fiber optic instrumentation. We also are extremely proud to be one of the few American developers and manufacturers of OTDRs and high tech photonics equipment, and remain highly dedicated to our American-made products. In closing, we d like to reaffirm our deep commitment to our mission of providing leading world-class quality solutions for our colleagues and friends. We maintain a passion for investments in our equipment designs, and development of exceptional customer relations through cooperation and training. We share this commitment in developing a superior team at TTI through education, training and personal development. Thank you for the opportunity to be your loyal servants, Mike and the TTI Team (888)-U.S.-OTDRS

3 FTE-7100 MICROTDR New!! Micro Touch Screen OTDR Available in a Variety of Models The FTE-7100 is available in a wide variety of models. It is available in Dual SM or MM and SM/MM Quad wave as well as CWDM and PON versions. Micro Size with Large Capability This small touch screen OTDR may give up some size, but give nothing away in fuctionality. The auto rotating screen offers a large clear trace view. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store files to the active project folder. Use stored projects to recall testing parameters for consistency in test setup. Loss Test Set and VFL The FTE7100 can support an optional Power Meter and/or VFL. When used with other TTI equipment the power meter s auto wavelength recognition will speed testing and help eliminate user error. Fib-R-View - Integrated Video Inspection Ensure accurate test and protect equipment from damage by inspecting connectors with the optional integrated one touch auto-center, and one touch auto pass/fail fiber optic video inspection system. Features: Models up to 39dB dynamic range 1 Meter Dead Zone Touch Screen Video Scope With Auto Pass/Fail Option VFL & Power Meter Options Bluetooth Android Tablet Operation Fib-R-Map Event Analyzer Macro Bend and Bidirectional Analysis Full Auto, Construction and Expert Modes SM, MM, Triple, Quad & CWDM Units Available Instant On, Immediate Scan Live Fiber Detection Onboard Memory of ~40,000 traces CW / Fiber Identifier Light Source CertSoft Report Software Real-Time System ORL Schematic View Trace Analysis The FTE7100 displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fiber and determine if it meets measurement criteria with its Pass/Fail capabilities. Auto Test The Auto Test feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or if the approximate length of the fiber is not known. File Storage and File Transfer The FTE-7100 supports onboard storage for ~40,000 traces. Trace files are easily transferred for use with the CertSoft reporting software suite via USB ports. CertSoft2 Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft2 reporting software. Reports can include trace graph, schematic and table analysis, loss test table and connector image.

4 FTE-7100 MICROTDR Specifications Wavelength Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range OTDR Specifications 850, 1300, 1310,1550 and 1625 ±20nm (CWDM Wavelengths nm ±3nm) 26/27dB MM, 34/33dB SM, (1310/1550/1625 PON 38/39/39dB) (CWDM wavelengths 35dB) 5-20,000 ns km, ft/kf, mi 1m 4m m ±(0.75m % x distance + sampling resolution) km MM, km SM VFL (Option) Emitter Type Laser Wavelength 650nm ± 5nm Laser Safety Class Class IIFDA21 CFR & IEC 825-1: 1993 Connector Type 2.5mm Universal Output Power 1mW Max. Laser Safety Class IIFDA21 CFR & IEC 825-1: 1993 Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) Linearity ±.05 db/db Memory Capacity ~40,000 Memory Type Power Supply/Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/o rubber boot) Weight Communication ports Internal Universal Li-ion 6hr typ. -20 to 60 C -0 to 40 C 6.25 L x W x H (159mm L x 105mm W x 48mm H) 1.5 lbs (0.7 kg) USB and Bluetooth Detector Type Connector Type Dynamic Range Calibrated Wavelengths Power Measurement Uncertainty Units of Measurement Power Meter (Option) InGaAs ST, FC, SC, 1.25mm and 2.5mm Interchangeable +5 to -77dB (CATV to -57dB) 850,1300,1310,1490,1550 and 1625nm ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm dbm, db.01 db Connector Styles Accessories Provided Choice of FC, ST, SC 5V - 2.1A USB Wall Power Adapter and Cable, Choice of FC, ST or SC Optical Port Adapters, PM is Supplied with 1.25mm, 2.5mm universal, FC, SC and ST Adapters. 2 stylus, Windows Compatible Software, Rubber Boot and Manual on CD Fiber Type Wavelengths Output Power Laser Safety Classification Modulation Modes Light Source Singlemode, Multimode 850,1300,1310,1490,1550 and 1625 nm ±20nm 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Ordering Information FTE /1550nm Dual Wavelength MICROTDR FTE /1300nm Dual Wavelength MICROTDR FTE-7100-QUAD 850/1300/1310/1550nm QUAD Wave MICROTDR FTE-7100-PON 1310/1550nm with 1625nm Active PON MICROTDR FTE-7100-CWDM-CL 1551/1571/1591/1611nm Dual Wavelength MICROTDR FTE-7100-CWDM-S 1471/1491/1511/1531nm Dual Wavelength MICROTDR Intuitive Expert Parameter Screen Large, Easy-to-Read Trace/ Events, Icons and Measurements Fib-R-Map Schematic Event Analysis FTE-7100-VP FTE-7100-PM FTE-7100-VFL Configurable Options Video Scope with VIS-300 Video Probe Option Power Meter Option Visible Fault Locator Option (888)-U.S.-OTDRS

5 FTE-7000A-DWDM OTDR Tunable DWDM OTDR 98 Channel Tunable OTDR Conduct optical time domain reflectometery test at wavelengths for DWDM channels in the C Band of the ITU Grid. Tunable Laser Source Operates as a CW or pulsed Tunable laser source. Touch Screen Operation There are three methods of operation for the FTE-7000A. There is a hard-button method directly on the units keypad, the bright 4-inch display allows for touch screen operation, and if a larger display is desired, this OTDR may be operated via Bluetooth on any compatible Android device. Fib-R-Map Trace Analysis The FTE7000A displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fiber and determine if it meets measurement criteria with its pass/fail capabilities. Fib-R-View - Integrated Video Inspection Ensure accurate test and protect equipment from damage by inspecting connectors with the integrated one-touch auto-center, and one-touch auto pass/fail fiber optic video inspection system. Features: Tunable OTDR with 98 C Band Wavelengths Tunable CW/Pulsed Laser Source 50 and 100 GHz Spacing Touch Screen and Keypad Full Auto, Construction and Expert Modes Fib-R-Map Comprehensive Event Analyzer Fib-R-View Auto Pass/Fail/Centering Scope 96 Channels ( ) on the ITU Grid 10 Hour Li-ion Batter Pack w/2 Hr. Charge Bidirectional Trace Analysis with Certsoft Onboard Memory of ~1000 Traces CertSoft2 Report Software with.sor Capability Auto Test The Auto Test feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or if the approximate length of the fiber is not known. File Storage and File Transfer There is onboard storage for up to 1000 traces. Trace files are easily transferred for use with the CertSoft software suite via USB/PC ports. CertSoft2 Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft2 reporting software. Reports can include trace graph, schematic and table analysis, loss test table, and connector image. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store files to the active project folder.

6 FTE-7000A-DWDM Specifications Standard Wavelengths OTDR Specifications 0.4 and 0.8nm Spacing Dynamic Range 35 db Pulse Width Units of Measurement Event Dead zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-time Refresh Rate Group Index of Refraction (GIR) Linearity 5-20,000 ns km, ft/kf, mi 1m 4m m ±(0.75m % x distance + sampling resolution) km 2 Hz ±.05 db/db Memory Capacity (Internal) up to 1000 Frequency Range Accuracy Line Width Side Mode Suppression Ration Output Power Range Power Setting Power Variation over Wavelength Range Minimum Channel Spacing TLS Specifications THz (Channels ) 1.5 GHz 1 MHz 45 db 3 dbm to 11 dbm 0.01 db ± 0.5 db 50 GHz (0.4nm) Fiber Type 9/125 µm ±Relative Intensity Noise Visible Fault Locator CAUTION Laser Radiation DO NOT STARE INTO BEAM Diode Laser 1 mw MAX OUTPUT at nm CLASS II LASER PRODUCT Laser Safety -140 db/hz Tunable Laser Source CAUTION CLASS 1M LASER PRODUCTS LASER RADIATION WAVELENGTHS DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS Graphical Display Power Supply / Charger Battery / Operating Time General Specifications 4 in Color Touch Screen Input V 50-60Hz, 0.6A / Output 15V, 1.2A Rechargeable Li-Ion / 10 hour Large, Easy-to-Read Trace/ Events, Icons and Measurements Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications / Ports Connector Styles Accessories Provided -20 to 60 C -10 to 40 C 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.7 lbs USB-PC FC, SC Interchangeable Universal Power Adapter w/us, UK, Continental Europe, and Australian Plugs, Interchangeable FC and SC Adapters, CertSoft2 Software, Rubber Boot, Manual on CD and 2 stylus Fib-R-Map Schematic Event Analysis Intuitive Expert Parameter Screen FTE-7000A-DWDM VIS300 Ordering Information C Band DWDM Tunable OTDR/Laser Source nm nm Video Probe for FTE7500 and FTE7000 Series (888)-U.S.-OTDRS

7 FTE-8100 Mini Fiber Optic Spectrum Analyzer 98 Channel DWDM Analyzer The FTE-8100 Handheld OSA tests up to 98 channels. Select 50GHz or 100GHz channel spacing in the C band of the ITU Grid Touch Screen Pass/Fail Thresholds User selectable Pass/Fail thresholds are indicated on the main graphical display by a highlighted background with failed channels falling outside the highlighted area. In the table view, failed measurements are easily identified by being shown in red. Auto Test button With its one button Auto Test feature, full set of selectable scale limits and thresholds, the FTE-8100 makes zeroing in on channel measurements easy. Power/Gain Tilt The Hand Held FTE-8100 offers high end features such as power tilt for DWDM channel equalization and gain tilt to adjust EDFA gain flatness. Features: 98 Channel DWDM Testing Available for CWDM Channels Integrated Video Inspection System 4 Color Touch Screen Selectable First Channel Setting 50 or 100 GHz DWDM Channel Spacing Pass/Fail Thresholds Fast <1/2 Second Update Bar Graph and Table Modes Auto Test Zooms in on Active Channels Interchangeable Fiber Optic Connectors Storable Parameter Settings Solid State Optics-No Moving Parts Easy Operation with Help Mode 6 hr Battery Life Impact Resistant Boot USB/PC Ports Fib-R-View - Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated one touch auto-center, and one touch auto pass/fail fiber optic video inspection system. Onboard Help System Use the onboard help text for a quick guide to the functions and features available on the FTE8100. Storable Test Configurations File and recall testing configurations for later use. Information Display For flexibility the channel numbers are selected in wavelength or frequency and the information is displayed in graph or table mode Onboard File Storage There is file storage for up to 1000 tests that may be downloaded to a PC and viewed with supplied CertSoft reporting software.

8 FTE-8100 Specification Specifications Wavelength Range Channel Spacing Wavelength Accuracy Channel Power Range Absolute Accuracy Max Composite Power PDL Optical Rejection Ratio Measurement Time Readout Return Loss Optical Interface Graphical Display Display Dimensions Weight Battery C-Band DWDM nm ( THz THz) General 50GHz, 100GHz ±0.1nm +10dBm to -50dBm ±1 db +28 dbm ±0.15dB 40dBc (@50GHz) < 1/2 Second 0.01dB >40dB Universal UPC (FC/SC) (Optional APC) Bar Graph and Table View 4 in Touch Color TFT 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.6 lbs Rechargeable NiMH - 6 hours operating time Power Input VAC, 50-60Hz, 0.3A, Output 9V, 0.67A Environmental Operation -10 C to 40 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adapters, CertSoft software suite and manual, USB cable and rubber boot Specifications are subject to change without notice FTE-8100C VIS-300 Ordering Information C-Band Fiber Optic Spectrum Analyzer TTI Video Probe Video Inspection System with IEC pass/fail grading zone system Main DWDM Scan Screen with 96 Channel Displayed (888)-U.S.-OTDRS

9 FTE-6100 Tunable Laser Source Hand Held Tunable Laser Source The TLS is available with 98 channels on the ITU Grid at channel Spacing down to 50 GHz (0.4nm). Onboard help system Use the onboard help text for a quick guide to the functions and features available on the FTE-6000 TLS Display The TLS displays output power and wavelength, frequency or ITU channel on a bright 4 color touch display. Integrated Video Inspection System Features: Selectable Step Size Down to 50 GHz Selectable Start & Stop Channels Displays in Wavelength/FrequencyChannel Selectable Dwell Time Rugged Case with Impact Resistant Boot USB PC Interface for firmware upgrades Battery Operated or International Line Voltage Simple Operation with onboard Help Mode Lowest Cost Hand Held Tunable Laser Source Interchangeable Fiber Optic Connectors Up to 96 Channels on the ITU Grid 4 Color Touch Display 10 hr. Battery Life Simple to Use Designed for simple operation and suited for field or lab use. The user has the ability to set the step size, power level, dwell time, and whether the sweep moves up or down the scale. Start Up The FTE-6100 offers a fast start up with minimal warm up and provides stable wavelength and power outputs. Rugged The FTE-6000 is manufactured in our rugged splashproof housing with a highly protective boot. Fib-R-View - Integrated Video Inspection Ensure an accurate test and protect equipment from damage by inspecting connectors with the integrated one-touch auto-center, and one-touch auto pass/fail fiber optic video inspection system. Visual Fault Locator The Visual Fault Locator determines the precise location of breaks or severe micro-bends in a fiber or cable under test by visually checking fiber for leaks of visible light.

10 FTE-6100 Specifications Frequency Range Accuracy Line Width Side Mode Suppression Ration Output Power Range Maximum Output Power Power Setting Power Accuracy Minimum Channel Spacing THz ( nm) ITU Channels /-1.5 GHz 1 MHz 40dB 6 db 13 dbm (Typ.) 0.01 db +/-1 dbm 50 GHz (0.4nm) Fiber Type 9/125 µm Relative Intensity Noise Graphical Display Dimensions Weight Battery Power -140 db/hz 4 in Color TFT 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.75 lbs Li-ion 12 hr typ. Input VAC, 15VDC Output Environmental Operation -10 C to + 40 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adaptors, USB Cable, Manual and Rubber Boot Specifications are subject to change without notice: The FTE-6100 Tunable Light Source, can conducted sweeps of the ITU grid. Optimize the test procedures by setting the beginning and ending wavelengths, step size, power level, dwell time and direction of the sweep. FTE-6100C VIS300 Ordering Information C-Band PRO-Net Tunable Laser Source Video Inspection Probe (888)-U.S.-OTDRS

11 FTE-7000A OTDR Available in a Variety of Models The FTE-7000A is available in a wide variety of models. Listed here are the standard Dual and Quad wave units as well as our Extended range an Economy units. Also presented in the brochure are the DWDM, CWDM and PON versions. Fib-R-View - Integrated Video Inspection Ensure accurate test and protect equipment from damage by inspecting connectors with the integrated one touch auto-center, and one touch auto pass/fail fiber optic video inspection system. Schematic View Trace Analysis The FTE7000A displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fiber and determine if it meets measurement criteria with its Pass/Fail capabilities. Features: Touch Screen, Keypad or Bluetooth Control CW & Fiber Identifier Light Source Up to 39dB Dynamic Range 1 Meter Dead Zone Fib-R-View Auto Pass/Fail/Centering Scope Auto-Wavelength Power Meter Bidirectional Trace Analysis with CertSoft2 Fib-R-Map Event Analyzer SM, MM, Triple and Quad Units Available Full Auto, Construction and Expert Modes Live Fiber Detection Onboard Memory of ~1000 traces CertSoft2 Report Software Dual Trace with Macro Bend Analysis Instant On, Immediate Scan Long-Life Lithium-Ion Battery Auto Test The Auto Test feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or if the approximate length of the fiber is not known. Integrated Loss Test Set The FTE7000A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength recognition will speed testing and help eliminate user error. Not available on quad wavelength units. File Storage and File Transfer Contains onboard storage for up to ~1000 traces. Trace files are easily transferred for use with the CertSoft software suite via USB/PC ports. CertSoft2 Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft2 reporting software. Reports can include trace graph, schematic and table analysis, loss test table and connector image. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store files to the active project folder. Use stored projects to recall testing parameters for consistency in test setup.

12 FTE-7000A Specifications Wavelength Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typ Real-Time Refresh Rate Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type OTDR 850, 1300, 1310,1490,1550, 1625nm ±20nm 26/27dB MM, 36/35/35dB SM 5-20,000 ns km, kf/kf, mi 1m 4m meters ±(0.75m % x distance + sampling resolution) km MM, km SM 2 Hz ±.05 db/db ~1000 Traces Internal Power Supply / Charger Input VAC, Output 15V 1.3A Battery Storage Temperature 10 hr. Li-ion -20 to 60 C Detector Type Connector Type Measurement Range Calibrated Wavelengths Units of Measurement Power Measurement Uncertainty Fiber Type Available Wavelengths Output Power Laser Safety Classification Modulation Modes Power Meter InGaAs 1.25mm & 2.5mm Univ, FC, ST and SC +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm Light Source dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Singlemode, Mutimode 850, 1300, 1310, 1490, 1550, 1625 nm ±20nm 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Operating Temp Range 0 to 40 C Dimensions 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) Weight 1.75 lbs (.8 kg) Communications ports USB/PC Port, Bluetooth Connector Styles FC, ST, SC Interchangeable Accessories Provided Universal power adapter w/interchangeable mains, interchangeable FC/ST and SC adapters, software, manual, and protective rubber boot. Intuitive Expert Parameter Screen Large - Easy to Read Trace, Icons and Measurements FTE-7000A-8513 FTE-7000A-1315 Ordering Information MM 850/1300nm OTDR with LTS SM 1310/1550nm OTDR with LTS FTE-7000A-QUAD FTE-7000A-EXT FTE-7000A-ECON VIS-300 Quad Wavelength 850/1300/1310/1550nm OTDR with LTS Extended Range SM, 1310/1550 OTDR. 38/39 db with LTS and Video Scope Capability 34/33dB, 1310/1550nm, Dual Wave Singlemode Economy OTDR (No PM or Video Scope Capability) Video Probe Add a C to the end part the number for CATV version LTS. Fib-R-Map Schematic Event Analysis Pass Fail Video Scope Feature (888)-U.S.-OTDRS

13 FTE-7000A-PON OTDR 38B Dynamic Range Touch Screen Operation There are three methods of operation for the FTE-7000A. There is a hard button method directly on the units keypad, the bright 4 inch display allows for touch screen operation and if a larger display is desired, this OTDR may be operated via Bluetooth on any compatible Android device. Auto-Grade Fault Finder Mode One button scans the fiber under test, selects best parameters at the selected wavelength and displays event analysis and schematic views of the data. Schematic View Trace Analysis The FTE7000A displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fiber and determine if it meets measurement criteria with its Pass/Fail capabilities. Auto Test The AutoTest feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. Features: 38 db Dynamic Range Touch Screen, Keypad or Tablet Control 10 Hour Battery Life. CW & Fiber Identifier Light Source Bluetooth Android VI Operation Fib-R-View Auto Pass/Fail/Centering Scope Auto-Wavelength Power Meter Real-time System ORL Bidirectional Trace Analysis with Certsoft Fib-R-Map Event Analyzer Full Auto, Construction and Expert Modes Live Fiber Detection Onboard Memory of ~4000 traces CertSoft Report Software with.sor Capability Dual Trace with Macro Bend Analysis Integrated Loss Test Set The FTE7000A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength recognition will speed testing and help eliminate user error. (Not available on quad wavelength units) File Storage and File Transfer There is onboard storage for up to ~1000 traces. Trace files are easily transferred for use with the CertSoft software suite via USB/ PC ports. CertSoft Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store files to the active project folder.

14 FTE-7000A- PON Specifications OTDR Power Meter Wavelength 1310, 1550, 1625nm ±20nm Detector Type InGaAs Dynamic Range 38/39/38dB SM Connector Type 1.25 and 2.5 universal, FC, ST and ST Pulse Width 5-20,000 ns Measurement Range +5 to -77dBm (CATV +25 to -57dBm) Units of Measurement km, ft/kf, mi Calibrated Wavelengths 850,1300,1310,1490,1550,1625nm Event Dead Zone 1m Units of Measurement dbm, db Attenuation Dead Zone 4m.01 db Distance Uncertainty Full Scale Distance Range Typical Real-Time Refresh Rate m ±(0.75m % x distance + sampling resolution) km SM 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery life ±.1 db/db ~4000 Traces Internal Input VAC, 50-60Hz Output 15V, 1.3A 12hr. LIthium-Ion Power Measurement Uncertainty Available Wavelengths Output Power Laser Safety Classification Modulation Modes ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Light Source 1310, 1550, 1625 nm ±20nm 0 dbm Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Storage Temperature Operating Temperature Range Dimensions Weight Communications ports Connector Styles -20 to 60 C 0 to 40 C 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.8 lbs (.8 kg) USB/PC Port, Bluetooth FC, ST, SC Interchangeable Accessories Provided Universal Power Adapter w/ interchangeable mains, Interchangeable FC and SC Adapters, Software, Manual and Protective Rubber Boot Intuitive Expert Parameter Screen Large - Easy to Read Trace, Icons and Measurements Ordering Information FTE-7000A-PON VIS /1550nm with 1625 Acitve, PON OTDR with Video Scope Capability (Probe Sold Separately) Video Probe Fib-R-Map Schematic Event Analysis Pass Fail Video Scope Feature (888)-U.S.-OTDRS

15 FTE-7000A-CWDM OTDR Touch Screen Operation There are three methods of operation for the FTE-7000A. There is a hard button method directly on the units keypad, the bright 4 inch display allows for touch screen operation and if a larger display is desired, this OTDR may be operated via Bluetooth on any compatible Android device. Autp-Grade Fault Finder Mode One button scans the fiber under test, selects best parameters at the selected wavelength and displays event analysis and schematic views of the data. Features: 35 db Dynamic Range 10 Hour Battery Life w/2 Hour Quick Charge Express Help System Touch Screen, Keypad or Tablet Control Auto-Grade Fault Finder CW & Fiber Identifier Light Source Bluetooth Android VI Operation Fib-R-View Auto Pass/Fail/Centering Scope Auto-Wavelength Recognition Power Meter Real-time System ORL Bidirectional Trace Analysis with Certsoft Fib-R-Map Event Analyzer Full Auto, Construction and Expert Modes Live Fiber Detection Long-Life Lithium-Ion Battery Onboard Memory of ~4000 traces CertSoft Report Software with.sor Capability Dual Trace with Macro Bend Analysis Schematic View Trace Analysis The FTE7000A displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fiber and determine if it meets measurement criteria with its Pass/Fail capabilities. Auto Test The AutoTest feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. Integrated Loss Test Set The FTE7000A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength recognition will speed testing and help eliminate user error. (Not available on quad wavelength units) File Storage and File Transfer There is onboard storage for up to ~1000 traces. Trace files are easily transferred for use with the CertSoft software suite via USB/ PC ports. CertSoft Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store files to the active project folder.

16 FTE-7000A-CWDM Specifications OTDR Power Meter Wavelength Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range 1471/1491/1511/1531 or 1551/1571/1591/1611nm +/-3nm 35dB 5-20,000 ns km, ft/kf, mi 1m 4m m ±(0.75m % x distance + sampling resolution) km SM Detector Type Connector Type Measurement Range Calibrated Wavelengths Units of Measurement Power Measurement Uncertainty InGaAs 1.25 and 2.5 universal, FC, ST and SC +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490/1550/1625 Plus Available CWDM Wavelengths. dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Typical Real-Time Refresh Rate 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery life Storage Temperature Operating Temperature Range Dimensions Weight Communications ports Connector Styles Accessories Provided ±.05 db/db ~4000 Traces Internal Input VAC, 50-60Hz, Output 15V, 1.2A 12 hr. LIthium-Ion -20 to 60 C 0 to 40 C 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.8 lbs (.8 kg) USB/PC Port, Bluetooth FC, SC Interchangeable Universal Power Adapter w/ interchangeable mains, Interchangeable FC and SC Adapters, Software, Manual and Protective Rubber Boot Available Wavelengths Fiber Type Output Power Laser Safety Classification Modulation Modes FTE-7000A-S FTE-7000A-CL VIS300 Light Source Wavelengths Configured for OTDR +/-3nm Single Mode 0 dbm Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Ordering Information (Probe Sold Separately)) 1471/1491/1511/1531nm, CWDM OTDR with Video Scope Capability and LTS 1551/1571/1591/1611nm, CWDM OTDR with Video Scope Capability and LTS Video Probe Large - Easy to Read Trace/ Events, Icons and Measurements (888)-U.S.-OTDRS Intuitive Expert Parameter Screen Fib-R-Map Schematic Event Analysis

17 FTE-7500A-CWDM OTDR Twelve Channel CWDM OTDR Up to 12 Wevelengths in a Single Unit OTDRs may be ordered with 8, 10 or 12 CWDM wavelengths. Standard units include nm for 8 wavelengths and nm for 10 wavelengths or configure a 12 wavelength unit using the nm 8 wavelength unit and add 4 additional wavelengths of your choice. 12 Wavelenght Auto Test Test a fiber at 1, 2 or up to 12 wavelengths with the touch of just one button. Fault Finder Mode One button scans the fiber under test, selects best parameters at the selected wavelength and displays event analysis Broadband Power Meter Onboard power meter calibrated at up to 12 CWDM wavelengths. Features: 35 db Dynamic Range Express Help System CW & Fiber Identifier Light Source Fib-R-View Auto Pass/Fail/Centering Scope Integrated Power Meter Bidirectional Trace Analysis with Certsoft Full Auto, Construction and Expert Modes Live Fiber Detection CW Light Source The FTE7500A-CWDM may be used as a CW light source. Select any of the configured wavelengths as a CW light source for commissioning or for loss test with the onboard Power Meter. Auto Test The Auto Test feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. CertSoft Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include trace graph, schematic and table analysis, loss test table and connector image. Onboard Memory of ~4000 traces CertSoft Report Software with.sor Capability Dual Trace Capability

18 FTE-7500A-CWDM Specifications OTDR Power Meter Wavelength Dynamic Range CWDM Wavelenghts as Configured (Available Wavelengths /-3nm) 35dB Detector Type Connector Type Measurement Range InGaAs 1.25 and 2.5 universal, FC, ST and SC +5 to -77dBm (CATV +25 to -57dBm) Pulse Width Units of Measurement Event Dead Zone 5-20,000 ns km, kf, mi 1m Calibrated Wavelengths Units of Measurement 850,1300, CWDM Wavelengths and 1625nm dbm, db.01 db Attenuation Dead Zone 4m m Power Measurement Uncertainty ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Distance Uncertainty ±(0.75m % x distance + sampling resolution) Full Scale Distance Range 1-256km Typical Real-Time Refresh Rate Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger 2 Hz ±.05 db/db ~500 Traces Internal and External USB Flash Drive Input VAC, 50-60Hz, Output 13.6V, 1.2A Fiber Type Available Wavelengths Output Power Laser Safety Classification Modulation Modes Light Source Single Mode Wavelengths Configured for OTDR application =/-3 nm 0 dbm Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Battery life 8 Hour Storage Temperature -20 to 60 C Operating Temperature Range 0 to 40 C 8. 3/8 L x 5 1/2 W x 3 H Dimensions (with rubber boot) (213mm L x 140mm W x 76mm H) Weight 2 lbs (.9 kg) Communications ports USB/PC and USB Flash Drive Port Ordering Information Probe Sold Separately 12 Wave CWDM OTDR, nm + 4 FTE-7500A-CWDM-12 Configured W/VFL, LTS, Video Scope 10 Wave CWDM OTDR, nm W/ FTE-7500A-CWDM-10 VFL, LTS, Video Scope Connector Styles Accessories Provided FC, SC Interchangeable Universal Power Adapter w/ interchangeable mains, Interchangeable FC and SC Adapters for optical port and FC, ST, SC, 1.25mm and 2.5mm universal adapters for power meter port, Software, Manual and Protective Rubber Boot FTE-7500A-CWDM-8 FTE-SCASE-LG VIS Wave CWDM OTDR, nm W/VFL, LTS, Video Scope Soft Case for FTE7500, FTE600 and FTE8000 Series Video Probe (888)-U.S.-OTDRS

19 FTE-8100-CWDM Channel Analyzer Fast Scan The FTE-8100-CWDM Channel Analyzer Displays a full scan of all 18 channels on the ITU grid twice a second. Onboard Help System Use the onboard help text for a quick guide to the functions and features available on the FTE8000-CWDM. Auto Test Button With its one button Auto Test feature, and a full set of selectable scale limits and thresholds, the FTE-8100-CWDM makes zeroing in on channel measurements easy. Simple to Use The FTE8100-CWDM is designed for simple operation and is suited for field or lab use. Power Tilt The FTE-8100-CWDM offers a Power Tilt feature for CWDM channel equalization. Features: Pass/Fail Thresholds Available in 8 or 18 Channels Fast Real Time with <1/2 second Update Fib-R-View Auto Pass/Fail/Centering Scope Bar Graph Auto Test Zooms in on Active Channels Rugged Case w/impact Resistant Boot Solid State Optics-No Moving Parts Easy Operation with Help Mode 4 Color Display 10hr Battery Life Impact Resistant Boot Stores 1000 test USB/PC Port Information Display The channel numbers are selected in wavelength or frequency for flexibility, and the information is displayed in graph or table mode. Onboard File Storage There is file storage for up to 1000 scans that may be downloaded directly to the PC using the supplied CertSoft software suite. Pass/Fail Thresholds The unit allows users to set Pass/Fail thresholds that are displayed on the main graphical display by a highlighted background. Failed channels fall outside the highlighted area and in the table view failed channels are displayed in red. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Connector images may be stored, allowing users to include them with test documents.

20 FTE-8100-CWDM Specifications Wavelength Range Channel Spacing Channel Pass Band Channel Power Range Absolute Accuracy Max Composite Power PDL Adjacent Channel Isolation Measurement Time Readout Return Loss Optical Interface Graphical Display Display Dimensions Weight Battery Power Specifications 18 Channel nm 8 Channel nm 20nm ±6.5nm +5dBm to -50dBm ±1 db +23dBm ±0.2dB 30dB < 1/2 Second 0.01dB >40dB Universal UPC (FC/SC) Bar Graph 4 in Color TFT 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.6 lbs Rechargeable Li-Ion - 12 hours operating time universal US, GB, EU, AU Mains Environmental Operation -10 C to 50 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adapters, CertSoft reporting software suite, USB cable, manual on CD and rubber boot Graph View Video Scope We Support Special Channel Configurations FTE8100-CWDM-18 FTE8100-CWDM-8 VIS-300 Ordering Information 18 CWDM Channel Analyzer with Touch Screen 8 Channel CWDM Analyzer with Touch Screen Video Probe File Managment (888)-U.S.-OTDRS

21 FTE-7500A QUAD OTDR Onboard Help System Select the help Icon and the OTDR displays a list of help subjects unique to the current application. Auto Test The Auto Test feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. Construction Mode This feature assist with testing a large number of fibers with similar settings. By pressing just one button, the OTDR will test a fiber at two wavelengths, save each test and then display both tests for review. Trace Analysis The trace analysis screen gives users the ability to quickly determine if the fiber meets measurement criteria with its Pass/Fail capabilities. Features: Instant On 36 db Dynamic Range Visual Fault Locator Event Table with Pass/Fail Feature 1 Meter Dead Zone Fib-R-View Auto Pass/Fail/Centering Scope Interchangeable Fiber Optic Connectors One Button Fault Finder Automated Construction Mode Trace Overlay Capability Onboard Memory for ~500 traces Auto-Wavelength Loss Test Set USB Flash Drive Port and Mini USB/PC Port Context Sensitive Help Lightweight Rugged Enclosure Easy To Read Color Display CertSoft Report Generation Software Suite Long Battery Life Integrated Loss Test Set The FTE7500A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs, the auto wavelength and auto test capabilities will speed testing and help eliminate user error. Integrated Visual Fault Locator Use the VFL to locate near end breaks, poor splices, and broken connectors in fiber optic cables or use it to identify fibers at the far end of a link. File Storage and File Transfer There is onboard storage for up to ~500 traces. Trace files are easily transferred for use with the CertSoft2 software suite via USB/PC or USB flash drive ports. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Image files may be stored, allowing users to include connector images with test documents. Trace Analysis and Reporting Project reporting and documentation is fast and easy with the Pass/Fail feature, onboard event table and the supplied CertSoft reporting software.

22 FTE-7500A-QUAD Specifications Wavelength Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-Time Refresh Rate OTDR 850, 1300, 1310, 1550nm ±20nm 26/27dB MM, 36/34dB SM, 5-20,000 ns km, kf, mi 1m 4m m ±(0.75m % x distance + sampling resolution) 1-64km MM, 1-256km SM 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications Ports Connector Styles Accessories Provided FTE-7500A-QUAD VIS-300 FTE-SCASE-LG ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 47-63Hz, Output 13.6V, 0.57A 8 AA NiMH - 8hr Operation -20 to 60 C 0 to 40 C 7.75 L x 4.5 W x 2.25 H (197mm L x 114mm W x 57mm H) 2 lbs USB/PC & USB Flash Drive Ports FC, ST, SC Interchangeable Universal Power Adapter w/interchangeable Mains, Interchangeable FC/ST and SC Adapters for the OTDR ports, FC/ST/ST/UNIV1.25mm and univ2.5mm Power Meter Adapters, Reporting Software, Manual and Protective Rubber Boot Ordering Information Quad Wavelength 850/1300/ 1310/1550nm OTDR with Video Scope, LTS and VFL (Scope Probe Sold Separately) Video Probe Soft Case for FTE-6000, 7500 and 8000 Series Add a C to the end part the number for CATV version LTS. Emitter Type Wavelength Laser Safety Class Connector Type Output Power Detector Type Connector Type Measurement Range Calibrated Wavelengths Units of Measurement Power Measurement Uncertainty Auto Test Range Available Wavelengths Output Power Laser Safety Classification Modulation Modes Certification Software with attached video scope image Visual Fault Locator Laser Safety Visible Fault Locator CAUTION Laser Radiation DO NOT STARE INTO BEAM Diode Laser 1 mw MAX OUTPUT at nm CLASS II LASER PRODUCT Power Meter Light Source Laser 650nm ±5nm Class IIFDA21 CFR & IEC 825-1: mm Universal 1mW Max. InGaAs 1.25mm & 2.5mm Univ, FC, ST and SC +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm 0 to -40dB 850, 1300, 1310, 1550 ±20nm 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Specifications are subject to change without notice: Full featured trace analysis with pass/fail feature. (888)-U.S.-OTDRS

23 FTE-5000 Loss Test Set/ORL Meter Loss Test Set/ ORL Meter The LTS/ORL Meter is available in a variety of wavelengths, with ORL. It is available in dual, triple and quad wavelength packages. Available Wavelengths The LTS may be configured with dual MM, dual SM, triple or quad wavelengths and the power meter is calibrated at 850, 1300, 1310, 1490 and 1550nm and 1625nm. Touch Screen Onboard help system Use the onboard help text for a quick guide to the functions and features available on the FTE Display Large 4 inch, easy to read color Touch Screen. Simple to Use It is designed for simple operation and is suited for field or lab use. Bluetooth Operation with Android VI App Operate the LTS with any compatible Android device using the free Android Virtual Instrument Application. Features: Bright Color Touch Screen Optical Loss/ORL Tester ORL Measurement Range to -60 db Power Meter with -77 dbm Dynamic Range Video Inspection System Automated Loss Measurements Auto Test Up To Three Wavelengths Auto Wavelength Switching Universal PM and LS Adapters Storage for 5,000 Test Rechargeable Batteries USB Interface Free Report Software On-Board Help Feature Certsoft Reporting Software Download test results to the included CertSoft software for report generation. Results may be paired with OTDR traces and connector images for complete report generation. Integrated Video Inspection Ensure accurate test and protect equipment from damage by inspecting connectors with the integrated video inspection system with the optional VIS300 video probe. The video scope includes an IEC pass/fail grading zone system. Image files may be stored, allowing users to include connector images with test documents. InGaAs Power Meter InGaAs based optical power meter calibrated at six wavelengths with a +5 to -77 dbm measurement range. Fiber Identification The units also performs fiber identification functions with modulation frequencies of 270, 1000 and 2000 Hz.

24 FTE-5000 Loss Test Set/ORL Meter Display General Specifications 4 in color touch screen Storage Locations Up to 5000 Battery/Operating Time Power Requirements Operating Temperature Range Dimensions (w/o rubber boot ) Weight Accessories Provided 4 AA Rechargeable NiMH / 6 hrs Wall mount, universal V Hz 9 VDC Center Positive with US, UK, Continental Europe, and Australian Plugs -10 to 45 C 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 0.52 Kg FC, ST, SC adaptors for Light Source 1.25mm, 2.5mm, FC, ST and SC for the Power Meter, rubber boot, battery, power supply/charger, manual, USB cable and CertSoft reporting software Power Meter Power Meter Detector Type InGaAs Power Meter Dynamic Range Auto Test Range Connector Type Calibrated Wavelengths Units of Measurement Power Measurement Uncertainty Modulation Modes Detected +5 to -77 db (CATV +25 to -57 db) 0 to - 36 db 1.25mm & 2.5mm Univ, FC, ST and SC 850, 1300, 1310, 1490, 1550, 1625 nm dbm, db 0.01dB ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm CW, 270 Hz, 1000 Hz, 2000 Hz Laser Output Power Output Stability Laser Wavelengths Provided Transmitted Modulation Modes Laser Safety Classification Spectral Width Light Source 0 dbm, 1mw ±.05 db / 24 constant temp, ±.02 db/c temperature coefficient 850,1300, 1310, 1490, 1550 and 1625nm (± 20 nm) CW, 270 Hz, 1000 Hz, 2000 Hz Class I safety per FDA/CDRH and IEC regulation <5nm typ. Optical Return Loss Dynamic Range ORL Wavelengths Optical Return Loss Accuracy Spectral Width (RMS) Connector Optical Return Loss Meter 0-55 db 1310/1550nm ±.75 a -40db reflection 0.01 db <5nm typ. FC/APC FTE FTE FTE FTE-5000-QUAD VIS-300 Large Easy to Read Color Touch Loss Test Set Video Inspection System with IEC pass/fail grading zone system Ordering Information LTS with 850/1300nm Light Source and Video Scope (Probe Sold Separately) LTS with 1310/1550nm Light Source and Video Scope (Probe Sold Separately) LTS with 1310/1490/1550nm Light Source and Video Scope (Probe Sold Separately) LTS with 850/1300/1310/1550nm Light Source (No Video Scope) Video Inspection Probe The FTE-5000 is available with a -60dB ORL Meter Add a C to the end of the Part number for CATV Versions. Example: FTE C (888)-U.S.-OTDRS

25 FTE-5100 Fiber Optic Video Scope Features: Interchangeable Adapters Digital Zoom USB Port for Connection to PC 8 Hour Battery Life IEC Auto Pass/Fail Grading System 150X and 300X Representation Position Image for Best Viewing Stores Connector Images Use with TTI CertSoft Software Suite Protective Rubber Boot with Stand Shipped with Universal AC Adapter Wide Range of Adapters Available One Hand Operation 4 TFT Display VIS-300 Probe is Compatible with the FTE1700 and FTE7000A Display Magnification Power Battery Type Operating Temp Dimensions FTE-5100 VIS-300 Specifications 4 in Color TFT 150X and 300X approx. Input VAC, 50-60Hz Output 9V, 0.67A Rechargeable NiMH 6 Hours Operating time typ. -10 C to +40 C 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) Specifications are Subject to Change Without Notice Ordering Information Video Inspection System Includes Scope, Probe, Software Suite, Manual and Universal Power Supply Video Probe The FTE5100 has a Pass/Fail grading system with images that can be stored and recalled. Stored images may be associated with OTDR trace files to produce complete professional reports that include the OTDR trace, along with connector image and LTS results. The FTE5100 is indispensable for testing connectors end face prior to connecting to expensive optical test equipment. This helps ensure accurate measurements and also helps protect equipment from damage caused by contaminated connectors. It is essential to have clean connectors to ensure networks operate at properly. The VIS-300 probe may be purchased separately and used with other FTE series equipment. The VIS-300 has a full range of tips available. Kit Contents The FTE-5100 Kit includes Probe, LCD Scope Unit, AC wall adapter, 2.5mm patch cord tip, USB Cable, Manual on CD and PC Software

26 FTE-4000 Variable Optical Attenuator Specifications Attenuation Range Wavelengths Uncertainty Repeatability Insertion Loss Return Loss Max Input Power FTE to 40dB FTE to 80dB 1310 and 1550 nm.01 db +/- 0.5 db +/- 0.1 db <2 db (<4dB FTE ) 50 db 27 dbm Graphical Display Dimensions Weight Battery Power 4 in Color TFT 8 5/8 L x 4 5/16 W x 2.3/8 H (219mm L x 109mm W x 60mm H) 1.8 lbs Rechargeable NiMH - 6 hours operating time universal US, GB, EU, AU Mains Environmental Operation -10 C to + 40 C TTI Hand Held Variable Optical Attenuator The FTE-4000 is available with 40 db or 80 db attenuation levels. Accessories Included Universal power supply. FC and SC adaptors, USB Cable and Manual Specifications are Subject to Change Without Notice Onboard Help System As with all of our advanced test equipment, the VOA has an onboard help feature. Applications The FTE-4000 can assist in the testing of system budget compliance, balancing transmitter power and adjusting receiver attenuation settings. Built-In Output Power Monitor The built-in output power monitor assists in setting appropriate attenuations levels. Sweep Mode Sweep mode can produce attenuation levels across a selected range. Rugged The FTE-4000 is manufactured in our rugged splash proof housing with a highly protective boot. Features: Up to 80 db Attenuation Built in Output Power Monitor Typical Insertion Loss <2dB Adjustable Step Sizes USB PC Interface w/remote Operation Absolute/Relative Attenuation Settings Calibrated at 1310/1550 Rugged Case with Protective Rubber Boot Lowest Cost Hand Held VOA 4 Color Display (888)-U.S.-OTDRS

27 VFL-280 Visual Fault Locator Features: Universal 2.5 mm Adapter Modulated Mode Standard AA Batteries >100 Hour Battery Life MM and SM Applications Compact Size TTI VFL-280 Visual Fault Locator This easy-to-use piece of equipment determines the precise location of breaks or severe micro-bends in a fiber or cable under test by visually checking fiber for leaks of visible light. Specifications Output Power 1mW max Wavelength 650 nm +/- 5nm Pulse Rate 6 Hz Emission Indicator LED Standard F/O Connector Universal 2.5 mm Duty Cycle 50% Find Poor Splices Use the VFL to find leaky splices or connectors within a patch panel or breaks within the dead zone of an OTDR. Small Size Just a little wider and taller than a credit card, weighing just over 4 ounces. Battery powered Over 100 hours of operation on 2 AA alkaline batteries. Battery Battery Life Size Weight Operating Temperature Storage Temperature Auto Shut-Off 2 (AA) Alkaline >100 hrs. 4.0 L x 2.5 W x 1.1 D 4.2 oz. -10 to 50 C 30 to 60 C 30 Min. Specifications are Subject to Change Without Notice Universal Adapter Shipped with a universal 2.5mm adapter. Fiber Identification Use the VFL to identify fibers in multi-fiber cables suitable for both singlemode and multimode fibers. Power Save feature The VFL-280 has an over ridable power saver feature that powers down the unit after 30 minutes.

28 New MICRO Series Terahertz Technologies Inc. 169 Clear Rd, Oriskany NY Toll Free: 888-U.S.-OTDRS Phone: Fax: TTI makes every effort to insure all statements and information for the products referred to in this document are accurate and reliable. TTI can not accept any responsibility for errors, omissions or miss statements, nor can they accept responsibility for any actions taken based on the information demonstrated herein. TTI reserves the right to make changes of any kind to the product referred to in this document without prior notice. 1/2019 Terahertz Technologies Inc. (888)-U.S.-OTDRS