PART II. (2) DIVISION D/4: 60 Rate B, Operation 1. (3) DIVISION D/12 60 Learnership rates of pay: Rate B Newcomers Rate C Newcomers Rate D Newcomers
|
|
|
- Elizabeth Rich
- 5 years ago
- Views:
Transcription
1 48 PART II INDEX Page 1. WAGES AND/OR EARNINGS ALLOWANCES 56 Subsistence Allowances Abnormally Dirty Work Allowance Height Allowances 3. WAGE TABLES 57 A. (a) RATES A TO H OPERATIONS, INCLUDING WATCHMAN S WORK 57 (b) VEHICLE DRIVING EXTERNAL TRANSPORT INCLUDING 58 FORKLIFT DRIVING 58 (c) WAGE RATES WITH SPECIFIC APPLICATION 59 (1) SCHEDULE G: 59 Subsection (I): Learners, Rate D, Operation 1 59 Subsection (x): Vitreous Enamelling, Operations 1(a) and (b) 59 Subsection (d): Structural Engineering, Categories 5 to 1(a) 59 (2) DIVISION D/4: 60 Rate B, Operation 1 (3) DIVISION D/12 60 Learnership rates of pay: Rate B Newcomers Rate C Newcomers Rate D Newcomers (4) DIVISION D/19: 60 Subsection (f), Rate A, Operation 1 (5) DIVISION D/22: 61 Subsection (b), Operation 1 Subsection (c), Operations 1 to 33 (6) DIVISION D/23: 61 Training period rates of pay: Rate DDD Newcomers Rate E Newcomers
2 49 (7) DIVISION D/24: 61 Rate D, Operation 1 (8) DIVISION E/2: 61 Subsection (b) Rate A1 (d) SCHEDULE F: WAGE RATES 62 (e) APPRENTICE WAGE RATES 62 (f) WAGE RATES APPLICABLE TO OPERATIONS IN DIVISION D/7 ONLY 63 B. For the period 1 July 2009 to 30 June 2010 (wage model) 63 C. for the period 1 July 2010 to 30 June TECHNICAL SCHEDULES: 64 SCHEDULE G 64 Section (a) - General 64 (i) Learners 69 (ii) Juveniles 70 (iii) Cranes and hoists 70 (iv) Vehicle driving External transport including 70 Forklift driving (v) Locomotive driving 71 (vi) Stationary engines 71 (vii) Pupil engineers and/or approved students 71 (viii) Watchman s work 71 (ix) Electrolytic finishing 71 (x) Vitreous enamelling 73 (xi) Machine engraving 73 (xii) Metal and/or ceramic spraying 73 Section (b)- Electrical engineering (installation/maintenance/repair 74 in the provinces Transvaal and Natal) Section (c) - Saw doctoring and/or sharpening and/or reconditioning 76 and/or repairing all types of cutting tools (excluding machine tools) Section (d)- Structural engineering 77 Section (e) - Fibreglass boatbuilding 82 Section (f) - Patternmaking 82 Section (g) - Metal service centres 82 Section (h) - Electronics and/or Telecommunication Division (erection, 84 Installation, maintenance and repair in provinces of Transvaal and Natal) Section (i) - Radio, Television, Refrigeration and Related Equipment 85 and Domestic Electrical Appliances Section (installation, repair and servicing) Section (j) - Stores Operations 86
3 50 Schedule M 87 (I) Machining operations 87 (II) Forming and/or bending and/or pressbrake operations 89 (III) Cutting and punching operations 90 (IV) Drilling operations 90 (V) Welding and soldering operations 91 (VI) Miscellaneous operations 91 (VII) Inspecting and checking operations 92 (VIII) Stores operations 92 Schedule D 93 Division D/O 92 Light Fabricating and/or Light Manufacturing Division (n.e.s.) Section (a) - General Section (b) - Precision engineering and cutting tool manufacture Division D/1 94 Agricultural Implement and/or Irrigation Machinery (including Windmills) and/or Engines Manufacturing, Erecting and Assembling Division Division D/2 96 Chain Manufacturing Division Division D/3 98 Cycle Manufacturing Division Section (a) - General Section (b) - Plastic operations Division D/4 100 Edge hand and Small Tools (other than Precision and/or Machine Tools) and/or Saw Manufacturing Division Division D/5 102 Press knife and Cutter and Footwear Tack and Nail Manufacturing Division Division D/6 103 Foundry and/or Castings Division Division D/7 106 Gate and Fence manufacturing Division Section (a) - Manufacturing of fencing, railings, gates, burglar-proofing and wash-line components Section (b) - Miscellaneous Manufacturing
4 51 Division D/8 107 Industrial Fasteners Manufacturing division Division D/9 113 Lead Products manufacturing Division Division D/ Manufacturing of Carbon Products Division Division D/ Electrical Element Manufacturing Division Division D/ Windows and/or Doors and/or Flyscreens and/or Louvres and/or Burglars Bars manufacturing Division Learnership periods and rates of pay therefore Division D/ Neon Signs and/or electric and/or Fluorescent Lamp Manufacturing And Assembling Division Division D/ Conversion of plastic Polymer, including the Manufacture of Articles or Parts of Articles Wholly or Mainly Made of Plastic, including the In-House Printing of such articles by the Manufacturer Division D/ Spring Manufacturing Division Division D/ Steel Reinforcement Division Division D/ Tungsten Carbide Tipped Drilling Equipment Manufacturing Division Division D/ Wire Drawing and/or Working and/or Weaving and/or Forming Manufacturing Division Section (a) - Wire drawing Section (b) - Wire drawing die manufacturing Section (c) - Wire working and/or weaving and/or forming and/or fabrication
5 52 Division D/ Wire and Wire Rope Manufacturing Division Section (a) - Cable stranding plant Section (b) - Fibre core making plant Section (c) - Wire drawing plant Section (d) - Wire drawing die manufacture Section (e) - Wire galvanizing plant Section (f) - Wire rope making plant Section (g) - Wire rope splicing plant Section (h) - Drum making plant Section (i) - Miscellaneous Division D/ Tube and/or Pipe Manufacturing division Division D/ Manufacture, including Remanufacture and/or Assembly of Domestic and/or portable Appliances Division Division D/ Sheetmetal Manufacturing Division Section (a) - General Section (b) - Hollowware manufacturing operations Section (c) - Woodworking operations when performed conjointly with metal furniture manufacture Division D/ Electronic, Radio Communications and/or Telecommunications Manufacturing Division (including Assembly and/or Erection) Manufacturing of electrical and/or electronic components for sale in bulk Training periods and rates of pay therefore Division D/ Tungsten Carbide Tool Manufacture Division Division D/ Motor Vehicle Parts and Components Manufacturing Division Exclusion of operations Division D/ Elevator and/or Escalator Manufacturing Division Division D/ Locomotive Manufacturing Division Section (a) - Electrical work and related activities
6 53 Section (b) - Mechanical work and related activities Section (c) - Painting and related activities Section (d) - Woodworking and related activities Division D/ Railway Wagon Manufacturing Section (a) - Electrical work and related activities Section (b) - Mechanical work and related activities Division D/ Electrical Engineering Division (n.e.s.) Section (a) - Transformers Section (b) - Motors Section (c) - Switchgear and accessories Section (d) - Field work Section (e) - General electrical Section (f) - General mechanical Division D/ Bright Bar Manufacturing Division Division D/ Forging Division Section A - Closed-die forging (closed impression forging) Section B.1 - Open-die forging on hammers Section B.2 - Open-die press forging Division D/ Radio, Television and Related Equipment Manufacturing Division Division D/33 - Manufacturers of metal containers 170 Schedule E/1 175 Coaching Stock Division Section (a) - Electrical work and related activities Section (b) - Mechanical work and related activities Section (c) - Woodworking and related activities Section (d) - Painting and related activities Division E/2 179 Burglar and other similar alarm systems Division (Manufacture, Installation, Repair and Servicing) Section (a) - Manufacturing section Section (b) - Installation work
7 54 Section (c) - Stand-by duty for employees engaged on Rate A1 worker Schedule E/3 181 Industrial Refrigeration and Air Conditioning Industry Division Section (a) - Manufacture and fabrication (shopwork) Section (b) - Installation section (i) General (ii) Piping (iii) Ductwork (iv) Insulation (v) Electrical (vi) Pneumatic Schedule F 187 Manufacture and/or Re-manufacture of Electric Cable and/or Electrical Conductors (excluding Busbars) Section (a) - Exceptions Section (b) - Employment at Group Z work 5. ANNEXURE A 189 Security of Employment and Severance Pay 1. Retrenchments and/or redundancies 2. Lay-offs 3. Limited Duration Contracts of Employment Contract of Employment ANNEXURE B 197 Five Grade Job and Wage Structure Industry Training Issues ANNEXURE C 201 The Skill Definitions accompanying the New Five Grade Structure Five Grade Structure ANNEXURE D 205 Productivity Bargaining Objective Productivity Guidelines ANNEXURE E 206 Employee Share option Participation Schemes (ESOPS) and the requirements of the Broad-Based black Economic Empowerment Act (BBBEE Act) ANNEXURE F 209 Code of Good Practice on Key Aspects of HIV/AIDS and Employment ANNEXURE G 220 Attendance of worker Representatives on National and Regional Bargaining Council Committees ANNEXURE H 221 Special Provisions Limited to Construction Sites
PROVINCE OF BRITISH COLUMBIA ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL
PROVINCE OF BRITISH COLUMBIA ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL Order in Council No. 691, Approved and Ordered DEC 1 0 200q Lieutenant Governor Executive Council Chambers, Victoria On the recommendation
PROVINCE OF BRITISH COLUMBIA ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL
PROVINCE OF BRITISH COLUMBIA ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL Order in Council No. 900 Approved and Ordered DEC - 8 2008 Executive Council Chambers, Victoria Lieutenant Governor On the recommendation
STEAMFITTER - PIPEFITTER TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT STEAMFITTER - PIPEFITTER TRADE REGULATION Alberta Regulation 305/2000 With amendments up to and including Alberta Regulation 117/2015 Office
INSTRUMENTATION AND CONTROL TECHNICIAN TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT INSTRUMENTATION AND CONTROL TECHNICIAN TRADE REGULATION Alberta Regulation 283/2000 With amendments up to and including Alberta Regulation 90/2017
We are pleased to offer products covering a multitude of SIC Code categories:
We are pleased to offer products covering a multitude of SIC Code categories: Mechanical Power Transmission Equipment 3010 Torque Converters and Speed Changers 3020 Gears, Pulleys, Sprockets, and Transmission
SPRINKLER SYSTEMS INSTALLER TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT SPRINKLER SYSTEMS INSTALLER TRADE REGULATION Alberta Regulation 304/2000 With amendments up to and including Alberta Regulation 119/2018 Current
NATIONAL TRAINING BOARD (ELECTRICIAN) REGULATIONS 2008 BR 54/2008 NATIONAL OCCUPATIONAL CERTIFICATION ACT :38
BR 54/ NATIONAL OCCUPATIONAL CERTIFICATION ACT 2004 2004 :38 The National Training Board, with the approval of the Minister responsible for the National Training Board, in exercise of the powers conferred
Required Materials For complete material(s) information, refer to
Butler Community College Health, Education, and Public Safety Division Troy R. Jellison Revised Fall 2018 Implemented Spring 2019 COURSE OUTLINE Firefighter 1 Course Description FS 100. Firefighter 1.
Volume Title: The Measurement of Durable Goods Prices. Volume URL:
This PDF is a selection from an out-of-print volume from the National Bureau of Economic Research Volume Title: The Measurement of Durable Goods Prices Volume Author/Editor: Robert J. Gordon Volume Publisher:
RESPIRABLE CRYSTALLINE SILICA PARAGRAPHS (C) THROUGH (J)
1926.1153 RESPIRABLE CRYSTALLINE SILICA PARAGRAPHS (C) THROUGH (J) 1926.1153(c) SPECIFIED EXPOSURE CONTROL METHODS 1926.1153(c)(1) For each employee engaged in a task identified on, the employer shall
Use saw equipped with integrated water delivery system that continuously feeds water to the blade.
1926.1153 Respirable crystalline silica. (c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering
Index to contents of Files I and II. File I
Safety Practices, The Pacific Telephone and Telegraph Co. (due to the size of the overall file the PDF copy of this manual has been broken down into two parts) Index to contents of Files I and II File
CURRICULUM BREAKDOWN
CURRICULUM BREAKDOWN TWO YEAR CURRICULUM - TECHNICAL COLLEGE FIRST YEAR FIRST SEMESTER Reading Blueprints Reading Schematics and Symbols Using Mathematics in the Plant Making Measurements Metals Non-Metals
OSHA Table 1
OSHA 1926.1153 Table 1 Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica >4 (i) Stationary masonry saws Use saw equipped with integrated water delivery system
Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica
TABLE 1 Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica Equipment/Task Engineering + Work Practice Control Methods Required Respiratory Protection up to 4 hours/shift
Policies and Procedures for the Missouri Master Gardener Program
Policies and Procedures for the Missouri Master Gardener Program University of Missouri Extension The mission of the University of Missouri Extension Master Gardener volunteer program is to provide horticultural
PROPOSED ORDINANCE #16-08 ORDINANCE #16-
PROPOSED ORDINANCE #16-08 ORDINANCE #16- AN ORDINANCE TO AMEND SECS. 12-72 AND 12-75 OF ARTICLE V, CHAPTER 12 OF THE WILLIAMSBURG CODE IN ORDER TO ESTABLISH NOISE STANDARDS FOR PERIODIC NON-EMERGENCY MAINTENANCE
JEFFERSON COLLEGE COURSE SYLLABUS HRA290 NORTH AMERICAN TECHNICIAN EXCELLENCE CERTIFICATION. 1 Credit Hour. Prepared by William Kaune
JEFFERSON COLLEGE COURSE SYLLABUS HRA290 NORTH AMERICAN TECHNICIAN EXCELLENCE CERTIFICATION 1 Credit Hour Prepared by William Kaune Mary Beth Ottinger, Division Chair, Business & Technical Education Elizabeth
Annex 2. Indicative list of electrical and electronic equipment which falls within the categories in Annex 1 and under the fractions in section 27(1).
From; Statutory Order on placing on the market of electrical and electronic equipment and management of waste electrical and electronic equipment no. 130, 6. feb. 2014 Annex 2 Indicative list of electrical
TABLE OF CONTENTS CHAPTER 2 WIRING AND PROTECTION CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook...xi How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
Landscape Act. (Act No. 110 of June 18, 2004)
Landscape Act (Act No. 110 of June 18, 2004) INDEX Chapter I General Provisions (Articles 1 to 7) Chapter II Landscape Plans and Measures Based on Them Section 1 Formulation, etc. of Landscape Plans (Articles
Crystalline Silica Control Methods
Crystalline Silica Control Methods Crystalline Silica Guidance Document 1.0 INTRODUCTION 1.1 This guidance document consistits of a table of different construction activities that create crystalline silica
or with a higher exposure potential than the processes, types of material, control methods, work
specific process, task, or activity. The data must reflect workplace conditions closely resembling or with a higher exposure potential than the processes, types of material, control methods, work practices,
Scope of Work and Other Terms & Conditions
Annexture-II Scope of Work and Other Terms Conditions Sl. 1. Removal Disconnection (i) Removal of existing heating elements, insulation brickwork of the side walls, roof, the doors and the bogie hearth.
Master Gardener Volunteer Expectations Guidelines
Master Gardener Volunteer Expectations Guidelines Revised November 2017 Onondaga County Master Gardener Volunteer Expectations I PURPOSE: The Master Gardener Volunteer Program is designed to increase the
UEE Volume 1 Part 1 Qualifications Framework EE-Oz Industry Skills Council
UEE30807 Certificate III in Electrotechnology Electrician National Qualification Number UEE30807 Scope This qualification provides competencies to select, install, set up, test, fault find, repair and
Portable Banner Welder JC-2000-GM User Manual
Portable Banner Welder JC-2000-GM User Manual i. Applications It can be applicable for welding PVC-P PE TPO ECB CSPE EPDM PVDF and other Coated fabric covering, foil and homogeneous or coating sealing
Update Note on the Disposal of Waste Electrical and Electronic Equipment (WEEE)
The Update Note on the Disposal of Waste Electrical and Electronic Equipment (WEEE) Background The Waste Electrical and Electronic Equipment (WEEE) Regulations came into force across the UK on 5 January
Atlantic Apprenticeship Curriculum Standard
Atlantic Workforce Partnership Atlantic Apprenticeship Curriculum Standard Based on the Atlantic Apprenticeship Curriculum Standard Steamfitter/Pipefitter Levels 1 & 2 in September 2018 (pg. 14 for Program
Submersible Supply Pump Packages
Submersible Supply Pump Packages ccessory for qua-ontrol, 7, S, Eco, S, Eco, -HT Break / Header Tank Systems 3 V versions - for qua-ontrol, 7, S, Eco, -HT Break / Header Tank Systems, Item Nº: 333, 333,
Safety Best Practices Manual
CHAPTER 24 OSHA Compliance Checklist te: This is not a comprehensive checklist. It is designed for a typical corporate aviation maintenance department. You must consult the OSHA 1910 Regulations for specific
(English Translation) January 28, For immediate release:
For immediate release: (English Translation) January 28, 2019 IHI Corporation Representative: Tsugio Mitsuoka President and Chief Executive Officer Securities code: 7013 Contact: Takayoshi Shirai Public
TABLE OF CONTENTS CHAPTER 5 SPECIAL OCCUPANCIES CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook...xiii How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
BASCO U-TUBE & TANK IMMERSION HEAT EXCHANGERS. ...world leaders in heat transfer technology
BASCO U-TUBE & TANK IMMERSION HEAT EXCHANGERS...world leaders in heat transfer technology BW-533.indd 1 6/7/07 5:33:16 PM Standard Heat Exchanger Designs Deliver Cost Effective Performance To address the
CONSTRUCTION REQUIREMENTS
CONSTRUCTION REQUIREMENTS Note: The buildings on the UCCS campus are divided into two categories: General Fund and Auxiliaries. General Fund Buildings include academic and administrative functions. Auxiliary
SECTION 2 NEC REFERENCES SECTION 1 LOW-VOLTAGE AND POWER- LIMITED SYSTEMS...1. CHAPTER 1 GENERAL Introduction...35
SECTION 1 LOW-VOLTAGE AND POWER- LIMITED SYSTEMS...1 Overview of Low-Voltage and Power-Limited Systems...3 Chapter 4 Equipment for General Use...3 Chapter 5 Special Occupancies...3 Chapter 6 Special Equipment...4
SUBJECT: Effective Date: Procedure Number:
SUBJECT: Effective Date: Procedure Number: Facilities Operations/ Utilities and Energy 9/1/2015 FS 2015 UES0002 Services Division of Responsibility Procedure APPLICABILITY/ACCOUNTABILITY: Supersedes: Page
CITY OF GREATER SUDBURY (CGS) ARENA EVENTS FIRE REGULATIONS
CITY OF GREATER SUDBURY (CGS) ARENA EVENTS FIRE REGULATIONS Last Updated: April 28, 2008 FIRE REGULATIONS The purpose of fire regulations is to maintain an acceptable level of fire safety within CGS facilities.
COMMISSION REGULATION (EU) / of
EUROPEAN COMMISSION Brussels, 30.11.2016 C(2016) 7767 final COMMISSION REGULATION (EU) / of 30.11.2016 amending Regulations (EC) No 1275/2008, (EC) No 107/2009, (EC) No 278/2009, (EC) No 640/2009, (EC)
ASME A17.1/CSA B44 Handbook
2016 Edition ASME A17.1/CSA B44 Handbook ASME A17.1-2016, Safety Code for Elevators and Escalators CSA B44-16, Safety Code for Elevators Kevin L. Brinkman, PE 2016 Edition ASME A17.1/CSA B44 Handbook ASME
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Bending Classic Electric Bender for Conduit & Pipe Item #555C Electric Bender Item #854DX Bend 1/2" to 2" RIGID/IMC/EMT
The purpose of this document is to provide guidance on the need and solutions to proper machine guarding in the workplace.
Machine Guarding University of Tennessee Safety Guide GS-060 Document Contact: EHS-General Safety Date effective: January 1, 2009 Revision Date: April 1, 2014 Purpose According to OSHA there are approximately
The Aerospace Industry. Partners Meeting March 29, 2016
The Aerospace Industry Partners Meeting March 29, 2016 Which Costs More? Boeing 747 Lockheed Martin F-22 Raptor $378 million $412 million How Many Chevy Cruzes For One GE-90 Engine? Approximate Cost: $20,000
Climate Change (Synthetic Greenhouse Gas Levies) Regulations 2013 (SR 2013/46)
Reprint as at (SR 2013/46) Jerry Mateparae, Governor-General Order in Council At Wellington this 25th day of March 2013 Present: His Excellency the Governor-General in Council Pursuant to sections 233(4),
SYLLABUS. Departmental Syllabus. Fire Protection Equipment Alarm Systems. Departmental Syllabus. Departmental Syllabus. Departmental Syllabus
DATE OF LAST REVIEW : 05/2018 SYLLABUS CIP CODE: 43.0205, 43.0202, 43.0203 SEMESTER: COURSE TITLE: COURSE NUMBER: Fire Protection Equipment Alarm Systems FRSC-0117 CREDIT HOURS: Three (3) INSTRUCTOR: OFFICE
Horizontal, Vertical and Mobile Test Beds Horizontal Test Beds All Chant Engineering Horizontal Test Beds come standard with fully enclosed hydraulically operatored safety guards (ends, top, bottom) for
FFA Agriculture Technology
Aug. -Sept., 018 FFA Agriculture Technology Superintendent... Duane Hutton, Winona, MN Board Member... Joe Scapanski, Sauk Rapids, MN... Joel Larsen, New Prague, MN FFA Agriculture Technology Rules. 1.
THAILAND REGULATORY BODY LEGISLATIVE FRAMEWORK RATIONALE FOR REGULATION. Consumer Protection.
THAILAND I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Thailand Consumer Protection. II. REGULATION BODY COUNTRY Thailand REGULATORY BODY Thai Industrial tandards Institute (TII) under the
Food Service Establishment Plan Review Form
CITY OF PARK RIDGE 505 BUTLER PLACE PARK RIDGE, IL 60068 TEL: 847/ 318-5291 FAX: 847/ 318-6411 TDD:847/ 318-5252 URL:http://www.parkridge.us Food Service Establishment Plan Review Form THE FOLLOWING INFORMATION
Liquefied Petroleum Gas Facility Written Fire Safety Analysis
Liquefied Petroleum Gas Facility Written Fire Safety Analysis For INDEX Page Introduction 2 Conducting the WFSA 2 WFSA CHECKLIST Section I Facility Information 3 Section II Facility Storage Container Information
FIRE EMERGENCY ACTION PLAN (EAP)
FIRE EMERGENCY ACTION PLAN (EAP) Gorseinon Institute December 2012 1 TABLE OF CONTENTS SECTION 1 Workplace Details Page 3 SECTION 6 Means of Escape Page 9 SECTION 2 Organisation and Responsibility 4 SECTION
Electrical Safety Program
Electrical Safety Program Developed by: The Office of Environmental Health and Safety June, 2010 Table of Contents Introduction 3 Scope..3 Definitions.3-5 CSU Electrical Shop...5 Responsibilities.5-6 Employees.....5
SECTION (16075) - IDENTIFICATION FOR ELECTRICAL SYSTEMS
SECTION 26 05 53 (16075) - IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Electrical identification materials and devices required to comply with ANSI C2, NFPA
ClearSpan Fabric Room Divider Installation Guide
ClearSpan Fabric Room Divider Installation Guide Actual room divider may differ from the example shown above. 2009 ClearSpan All Rights Reserved. Reproduction is prohibited without permission. Revision
WIRING AND PROTECTION
5997ch02.qxd_mg_cc 4/6/05 12:42 PM Page 5 2 WIRING AND PROTECTION (Excerpts from Chapter 2) 210.1 Scope ARTICLE 210 BRANCH CIRCUITS I. General Provisions Article 210 applies to all branch circuits except
MANUAL OF PROCEDURE. Keys and Access Control (Standard and Electronic)
MANUAL OF PROCEDURE PROCEDURE NUMBER: 1411 PAGE 1 of 6 PROCEDURE TITLE: STATUTORY REFERENCE: BASED ON POLICY: Keys and Access Control (Standard and Electronic) Florida Statutes 1001.64, 1013.37, and 934.03;
Liquefied Petroleum Gas Facility Written Fire Safety Analysis
Liquefied Petroleum Gas Facility Written Fire Safety Analysis For Completed by Facility manager Received by Fire Department/Emergency Response representative Date Date INDEX Page Introduction 2 Conducting
Apprenticeship and Industry Training
Apprenticeship and Industry Training Gasfitter Apprenticeship Course Outline 008 (2017) ADVANCED EDUCATION CATALOGUING IN PUBLICATION DATA Apprenticeship and Industry Training: Gasfitter Apprenticeship
Alternate Evacuation Route B: Secondary direction of egress considered safe with the information available.
SOG NUMBER: MC-ER-04 REVISION NO: 13 PAGE 1 OF 5 I. PURPOSE To identify and establish Emergency Action and Response plans for regulatory compliance and to provide an operational framework for emergency
Perform on-site emergency troubleshooting, programming, and repair of our fire alarm, burglar alarm, access control and video surveillance systems.
CENTRAL DAUPHIN SCHOOL DISTRICT POSITION DESCRIPTION Position: Life Safety/Security (LSS) Technician Department: Buildings and Grounds FLSA: Non-exempt Reports To: Maintenance Supervisor SUMMARY Under
MAINTENANCE AND SERVICE OF AUTOMATIC FIRE EXTINGUISHING SYSTEMS
FIRE DEPARTMENT Bureau of Fire Protection and Life Safety www.cityofsanmateo.org 1040 East Hillsdale Blvd Foster City, CA 94404 (650) 522-7940 FAX: (650) 522-7941 MAINTENANCE AND SERVICE OF AUTOMATIC FIRE
THAILAND REGULATORY BODY LEGISLATIVE FRAMEWORK RATIONALE FOR REGULATION. Consumer Protection.
THAILAND I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Thailand Consumer Protection. II. REGULATION BODY COUNTRY Thailand REGULATORY BODY Thai Industrial tandards Institute (TII) under the
Subject Description Form
Subject Description Form Subject Code Subject Title Credit Value IC259 IC Training for BSE II 8 Training Credits Level 2 Pre-requisite / Co-requisite/ Exclusion Objectives Nil 1) To provide trainees with
Overview of the Refrigeration Safety Ordinance
Overview of the Refrigeration Safety Ordinance Unofficial translation (October 2016) The High Pressure Gas Safety Institute of Japan (KHK) Table of Contents Overview of the Refrigeration Safety Ordinance
Florida Senate SB 982 By Senator Bennett
By Senator Bennett 1 A bill to be entitled 2 An act relating to electrical and alarm system 3 contracting; amending s. 489.503, F.S.; 4 requiring certain contractors to be certified 5 pursuant to part
Proposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
Fire Protection Systems FST 209. COURSE SYLLABUS Fire Protection Systems FST 209 [Semester] CRN 3 Credits
![Fire Protection Systems FST 209. COURSE SYLLABUS Fire Protection Systems FST 209 [Semester] CRN 3 Credits](/thumbs/77/75670006.jpg "Fire Protection Systems FST 209. COURSE SYLLABUS Fire Protection Systems FST 209 [Semester] CRN 3 Credits")
COURSE SYLLABUS Fire Protection Systems [Semester] CRN 3 Credits Instructor Name: Instructor Email: Instructor Phone: Office Hours: Class Meeting Dates/Location/Time: Location: Class Days: Class Times:
EU Declaration of Conformity Annex
The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications. If not
Alternate Evacuation Route B: Secondary direction of egress considered safe with the information available.
SOG NUMBER: MC-ER-04 REVISION NO: 10 PAGE 1 OF 5 I. PURPOSE To identify and establish Emergency Action and Response plans for regulatory compliance and to provide an operational framework for emergency
Sprinkler System Installer Level 1
Level 1 Unit: A1 Introduction to Sprinkler System Industry Level: One Duration: 7 hours Theory: Practical: 7 hours 0 hours Overview: This unit is designed to provide the apprentice with an overview of
Chapter 1 General...9 Article 100 Definitions...11 Article 100 Questions Article 110 Requirements for Electrical Installations...
Article 90 Introduction...1 90.1 Purpose of the NEC...1 90.2 Scope of the NEC...2 90.3 Code Arrangement...4 90.4 Enforcement...5 90.5 Mandatory Requirements and Explanatory Material...6 90.6 Formal Interpretations...6
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1 Hotfoil, Inc. Robbinsville, New Jersey Phone: 609.259.4118 Fax: 609.259.4119 http:\\hotfoil.com INDEX Section I Product Specification
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT ELECTRICAL POWER AND TRANSMISSION INSTALLERS. Test Code: 5922 Version: 01
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT ELECTRICAL POWER AND TRANSMISSION INSTALLERS Test Code: 5922 Version: 01 Specific competencies and skills tested in this assessment: Basic Safety Identify career
Annex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
EC-Declaration of Conformity Annex
EC-Declaration of Conformity Annex Document number: / ZCI-2987462-DOC-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance
GUIDE TO EVALUATING THE RISK OF DISEASE IN A GREENHOUSE
GUIDE TO EVALUATING THE RISK OF DISEASE IN A GREENHOUSE The following is a guide to assessing the various procedures and equipment used in a greenhouse, keeping in mind the risk of pathogen, mite, and
10.6 Schedule of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
Electrical Program. Electrical Laws & Rules. Electrical RCW WAC B. Permits Inspections Access Description Directions Comments.
Electrical Laws & Rules Licensing Electrical Work Scope Administrator Duties Certification Supervision RCW 19.28 WAC 296-46B Permits Inspections Access Description Directions Comments Electrical Program
Always make sure to check the heating film before, during, and after installation of the floor covering.
Installation of floor heating film for ceramic tiles, granite and other stone or composite flooring Read through this entire manual before starting installation. All electrical connections must be made
JEFFERSON COLLEGE COURSE SYLLABUS HRA125 REFRIGERATION AND A/C MECHANICAL SYSTEMS. 5 Credit Hours. Prepared by William Kaune November 30, 2010
JEFFERSON COLLEGE COURSE SYLLABUS HRA125 REFRIGERATION AND A/C MECHANICAL SYSTEMS 5 Credit Hours Prepared by William Kaune November 30, 2010 Mary Beth Ottinger, Division Chair, Business & Technical Education
F&S Control of Hazardous Energy Program
University of Illinois at Urbana-Champaign Facilities & Services Division of Safety and Compliance F&S Control of Hazardous Energy Program February 2013 Last updated by: j. neighbors Page 1 of 12 Last
AMENDMENTS. Date Effective. Amendment No. Council. DCP 14 Davidson St, Greenacre Page 2
AMENDMENTS Amendment No. Description Adopted by Council Date Effective DCP 14 Davidson St, Greenacre Page 2 TABLE OF CONTENTS 1.0 INTRODUCTION... 4 1.1 NAME OF THIS PLAN... 4 1.2 COMMENCEMENT OF DEVELOPMENT
STATEMENT OF THE HEALTH AND SAFETY STRATEGY FOR THE SYDNEY RUSSELL SCHOOL
Health & Safety Contents Health & Safety... 1 Contents... 2 HEALTH AND SAFETY STRATEGY... 3 GOVERNORS STATEMENT... 3 STATEMENT OF THE HEALTH AND SAFETY STRATEGY FOR THE SYDNEY RUSSELL SCHOOL... 3 HEALTH
SAN DIEGO COMMUNITY COLLEGE DISTRICT MIRAMAR COLLEGE ASSOCIATE DEGREE COURSE OUTLINE
FIPT 202A CIC Approval: 12/21/2006 BOT APPROVAL: 05/13/1998 STATE APPROVAL: EFFECTIVE TERM: Fall 1998 SECTION I SAN DIEGO COMMUNITY COLLEGE DISTRICT MIRAMAR COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SUBJECT
Energy Conservation Procedures
GENERAL Energy Conservation Procedures User-group: Permanent Academic Staff, Part Time Hourly Paid Academic Staff, Permanent Support Staff, Temporary Support Staff. Category: General. Review Date: April
EU Declaration of Conformity Annex
EU Declaration of Conformity Annex Document number: 2016 / 9C1-3423710-EN-00 The conformity of the designated product(s) with the provisions of the European radio equipment Directive is given by the compliance
3520 A Energy Conservation Standards
3520 A Energy Conservation Standards Regulation Original Adoption: 04/14/2009 Effective Date: 08/06/2009 Revision Dates: 08/05/2009 I. PURPOSE The purpose of this regulation is to establish the energy
List of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements
Updated on 13 November 2015 List of Harmonised Standards for EEE *or any newer edition No. Agreed edition* of IEC Standards for ASEAN Harmonization Standard Title Scope of Standard 1 IEC 60065 Ed.7.0(2001)
Under. Apprenticeship Training Scheme
SYLLABUS For the trade of MECHANIC (ELECTRICAL DOMESTIC APPLIANCES Under Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training
Compfitt Group- A strong partner for the industry
Compfitt Group- A strong partner for the industry Things are developing with rapid speed. Changes are happening at a tremendous rate for each industrial company; changes that demand actions for the daily
TABLE OF CONTENTS. Part I Administrative
Part I Administrative.......................... 1-1 CHAPTER 1 SCOPE AND ADMINISTRATION. 1-1 R101 General............................. 1-1 R102 Applicability......................... 1-2 R103 (Not adopted)........................
SPEARFISH FIRE DEPARTMENT POLICIES AND PROCEDURES
SPEARFISH FIRE DEPARTMENT POLICIES AND PROCEDURES Page 1 of 4 Volume: Training Section: 30.00 Number: 30.02 Subject: Live Fire Training Date Issued: 9 January 2017 Rescinds: Originator: Assistant Fire
Emergency Action Plan
Emergency Action Plan Company Name Current as of Company Address Phone Number Contents EMERGENCY ACTION PLAN 2 SCOPE OF THE PLAN 2 Emergency Plan Coordinators 2 First Aid and CPR certified employees 2
Corra/Clad MC Cable The contractors cable of choice in place of conduit and wire.
Corra/Clad MC Cable The contractors cable of choice in place of conduit and wire. Installs fast and easy Lowers labor costs Replaces conduit and wire Provides superior grounding UL Listed Corra/Clad MC
STATE NON-FOOD PRODUCTS INSPECTORATE UNDER THE MINISTRY OF THE ECONOMY
Ref. Ares(2015)302157-26/01/2015 STATE NON-FOOD PRODUCTS INSPECTORATE UNDER THE MINISTRY OF THE ECONOMY Budgetary institution, Gedimino Ave. 38, LT-01104 Vilnius, telephone: 8 706 64 950, fax: 8 706 64
170A 2809 Fertilizer grade phosphoric acid ;
[TO BE PUBLISHED IN PART II, SECTION 3, SUB-SECTION OF THE GAZETTE OF INDIA, EXTRAORDINARY] GOVERNMENT OF INDIA MINISTRY OF FINANCE (Department of Revenue) Notification No. 19/2018-Integrated Tax (Rate)
SECTION ELECTRICAL IDENTIFICATION
SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do Stránka 1
Dokument Referenčný dokument Názov CLC TC/SC IEC TC/SC dop dow CLC/TR 50555:2010 Interruption indexes CLC TC 8X EN 60068-2-5:2011 IEC 60068-2-5:2010 (EQV) + corrigendum Dec. 2010 (EQV) Environmental testing
Floor Coverings Industry Distribution Channels
TABLE OF CONTENTS U.S. FLOOR COVERINGS SPENDING TRENDS AND DISTRIBUTION CHANNEL ANALYSIS... 1 Summary Of Major Findings... 1 Installed Value Of Floor Coverings Spending... 2 Hard Surface Versus Soft Surface
Emergency Evacuation Plans and Exercises. Risk Management Services
Emergency Evacuation Plans and Exercises Services Table of Contents I. Program Goals and Objectives... 2 II. Scope and Application... 2 III. Responsibilities... 2 IV. Emergency Evacuation Plans and Maps...