BSI the UK voice into European and national standards
|
|
- Roderick May
- 5 years ago
- Views:
Transcription
1 BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1
2 Contents What are standards? About BSI Standards benefits Standards-making Getting involved 2
3 What are standards? 3
4 Standards are an agreed way of doing something 4
5 Standards can be about anything and be used by anyone All sectors Private Public Charities All businesses Sole traders SMEs International PLCs 5
6 What standards do 6
7 Copyright 2016 BSI. All rights reserved. The difference standards have made to the world Product Specification Business Process Process Standards Business Potential Technical standards for products and services emerged at the end of the 19 th century, simplifying procurement and supporting trade and quality. Process standards supporting management systems enabled businesses to improve their performance. Business Potential Standards The third dimension of business standards are focused on principles and frameworks, helping people and organisations deliver their full potential. Product Specification Standards Business Process Standards Today 7
8 About BSI 8
9 Who is BSI? Experienced Trusted Specialist Reputable The world s first National Standards Body established in 1901 and a founding member of ISO and IEC A Royal Charter company reinvesting profits back into our business Standards Creation, Training, Certification, Software Solutions, Supply Chain Solutions and Specialist consultancy services Thought Leaders Shaped the world s most adopted standards 9
10 Some of the world s top standards created by BSI (1987) Quality BS 5750 (1979) > ISO 9001 (1999) Health & Safety BS 8800 (1996) > BS OHSAS Reputable (1996) Environment BS 7750 (1992) > ISO (2012) Business Continuity BS (2007) > ISO (2005) Information security BS 7799 (1995) > ISO Thought Leaders Shaped the world s most adopted standards Over 1.6m organizations worldwide use these standards as best practice, helping them to run more efficiently, saving money and resources 10
11 Over 110 years of standards-making at BSI Products Beginning in 1901, the first standards focused on product specifications to harmonize and facilitate commerce and reduce duplication. These are still the most numerous standards, including: Steel specifications Construction Agricultural commodities Consumer and electrical products Personal safety equipment Medical devices Business processes The next generation of standards focused on business processes to ensure consistent quality output. BSI shaped forerunner standards for: Quality management (ISO 9001) Information security (ISO/IEC 27001) Environment management (ISO 14001) Occupational health and safety (OHSAS 18001, will become ISO 45001) IT service management (ISO/IEC ) Business continuity (ISO 22301) Sustainable events (ISO 20121) Business potential The new generation of standards is centred around people behaviour and values to help organizations realize potential and protect their corporate reputation. Key standards include: Anti-bribery management system (BS 10500, will become ISO 37001) Corporate social responsibility guidance (ISO 26001) Collaborative business relationships (BS 11000, will become ISO 11000) 11
12 BSI Group UK s National Standards Body Policy, Engagement National Standards Body Assessment and Certification Compliance support Standards Market Development, Committee management Information Solutions Sales, Membership, ICT Platforms Training Advisory Services 12
13 The international dimension ISO (International Organization for Standardization) 164 National Standards Body members globally CEN (European Committee for Standardization) 34 Member countries EU 28, EFTA 3, FYROM, Turkey, Serbia IEC (International Electrotechnical Commission) CENELEC (European Committee for Electrotechnical Standardization). 13
14 National, European and international standards BSI as NSB manages BS, EN & ISO, IEC standards. All EN and most international standards are adopted as British Standards Int l Standards (ISO, IEC) Regional Standards (EN) National Standards, e.g. British Standards (BS) Sponsored standards BSI PAS PAS route to national and international standards Private & professional standards, codes and guidance Private and Consortia Standards Corporate Technical Specifications Professional Codes, Guidance, Best Practice 14
15 National, European and international standards CEN/TC 454 Algae & algae products National Committee Algae & algae products 15
16 Scope and method of work: CEN/TC 454 Algae and algae products Specification, classification, terminology and determination methods for algae (genera) and algae-based products immediately derived from or used in algae production processes. In addition, guidance on the specific application of algae products as feedstock or intermediates for energy and non-energy products may be developed. Where specific standards for properties (quality or determination) of such feedstock for a certain industry exist, these will be referenced and considered as beyond the scope of the committee. For the purpose of this committee algae and algae-based products (and their intermediates) are defined as algal biomass, algae extracts or purified compounds from algae, including photoautotrophic, autotrophic, mixotrophic and heterotrophic algae, produced in open cultivation systems, as for example raceway ponds, lagoons and natural environment, and produced in closed systems, as for example photobioreactors, fermenters and other systems." 16
17 WG 6 Product test methods WG 1 Terminology WG 2 Classification WG 5 Specifications for non food/feed Accelerate sector applications innovation CEN/TC 454 WG 4 Specifications for food/feed sector applications WG 3 Algae Processing 17
18 European standards from CEN and CENELEC and BSI All full members adopt a single standard model: One standard across 34 countries for each aspect of a product or service that is standardized UK influence over European standards is high: BSI provides over 80 Technical Committee secretariats in CEN and CENELEC UK experts provide hundreds of committee chairs and working group convenors in CEN and CENELEC BSI participates in all governance levels of CEN and CENELEC Copyright 2018 BSI. All rights reserved 18
19 Standards benefits 19
20 Benefits to the UK economy Research findings 20
21 Business benefits of standards Accelerate innovation Improve quality Business benefits Reduce risk and protect brand reputation Improve environmental performance 21
22 Standards-making 22
23 The Standards Making Process My idea is Anyone can suggest an idea for a new standard (a proposal for work) Public involvement All ideas for new standards are assessed Public involvement If approved then a project is created Once the document passes final approval it is published Public involvement National standards are reviewed every 5 years. The committee decide whether the standard needs to be withdrawn, confirmed or reconfirmed, amended or revised. The committee drafts the standard The updated draft is issued for final approval The committee considers the comments The draft is then issued for enquiry Public involvement 23
24 Standards-making at BSI In numbers Committee members c Technical and sub-committees c Current projects c Current British Standards c Standards published annually c
25 BSI committee structure Standards Policy and Strategy Committee Technical Committee 1 Technical Committee 2 Technical Committee 3 Sub Committee 1 Sub Committee 2 Sub Committee 1 Sub Committee 1 Panel 1 Panel 2 Panel 1 Panel 2 25
26 Representation on technical committees: example Trade associations Consumer bodies Standards users Certification bodies Professional institutions Government departments BSI committee Research organizations Enforcement bodies Secretary Educational bodies Chair Trades unions Copyright 2017 BSI. All rights reserved. 26
27 Standards are made by people for people, everywhere Agreements reached by consensus of what good looks like Culmination of best practice and collective wisdom Voluntary enablers of enterprise and innovation Facilitating trade and improving business performance Connect with us and get involved 27
28 Jessy Mathew Programme Manager Sustainability Sector
BSI the UK National Standards Body: The Role of Standards
BSI the UK National Standards Body: The Role of Standards Anthony Burd - Head of Sector - Construction Copyright 2012 BSI. All rights reserved. This Session The BSI Group and the role of standards British
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationBSI Kitemark A passport to opportunities in the Middle East
BSI Kitemark A passport to opportunities in the Middle East Robert Hine Head of Commercial Engagement Copyright 2016 BSI. All rights reserved. 1 BSI Group Policy, Engagement National Standards Body Assessment
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More informationThe New PPE Regulation (EU) 2016/425
The New PPE Regulation (EU) 2016/425 Dave Tuplin Certification Manager, BSI 1 PPE Regulation (EU) 2016/425 changes Agenda Who is BSI Landscape and timeframes Scope of the new PPE Regulation Categorisation
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationBUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-1 First edition 2003-01 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements
More informationStandardization through the European Committee for Standardization. Thomas Fischer SUB Göttingen
Standardization through the European Committee for Standardization Thomas Fischer SUB Topics What is CEN? How does CEN work? Examples of recent activities What does this mean for CASHMERE-Int? 2 What is
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationCYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-2 First edition 2003-07 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 Reference number
More informationTECHNICAL REPORT IEC TR 62987
TECHNICAL REPORT IEC TR 62987 Edition 1.0 2015-09 colour inside Nuclear power plants Instrumentation and control systems important to safety Use of Failure Mode and Effects Analysis (FMEA) and related
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62885-1 Edition 1.0 2016-08 Surface cleaning appliances Part 1: General requirements on test material and test equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.080
More informationRole of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
More informationIntroduction to ISO and ISO membership
Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-3 First edition 2003-03 Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the required safety integrity
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-52 Edition 3.0 2017-11 Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 19.040
More informationInteroperability from the perspective of standards
Interoperability from the perspective of standards Alina IATAN CEN and CENELEC General considerations about European Standrads CEN and CENELEC 2018 2 Facts and figures about CEN and CENELEC 465 CEN/CLC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-1 First edition 2003-01 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61508-2 First edition 2000-05 BASIC SAFETY PUBLICATION Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 2: Requirements for electrical/electronic/
More informationEU Standardization & EU Service Standardization
EU Standardization & EU Service Standardization Dr. Betty Xu Seconded European Standardization Expert in China (SESEC) 7 th Sept 2015 EU Standardization & EU Service Standardization Content Table 1. SESEC
More informationBUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationISO Clean Version of Revised Working Draft (N 348)
ISO/TC 145/SC 2/WG 1 N 358 Date: 2006-05-29 Source: ISO/TC 145/SC 2/WG 1 Secretariat Project: ISO 23601 Status: 20.20 (WD study initiated) Requested action: for information Distribution: Members of ISO/TC
More informationISO Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
More informationEuropean Standards: Supporting the European Single Market for Services
2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,
More informationOverview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)
Annex 9 verview of standardization and mandatory technical regulation systems of Turkmenistan (gas and electricity) Prepared by: Reviewed by: Quality Assured by: Leonid Malov Viktor Petrenko Volodymyr
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-30 Third edition 2005 Environmental testing Part 2-30: Tests Test Db: IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62267-2 Edition 1.0 2011-03 Railway applications Automated urban guided transport (AUGT) Safety requirements Part 2: Hazard analysis at top system level INTERNATIONAL ELECTROTECHNICAL
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationStandards and Standardisation. An Overview
Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing
More informationHistory of PKN. History of PKN
History of PKN History of PKN 1923 On the initiative of ing. Piotr Drzewiecki Technical Committee for Standardization of Industrial Products and Their Delivery is being established at the Ministry of Trade
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 60079-46 Edition 1.0 2017-08 Explosive atmospheres Part 46: Equipment assemblies INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.260.20 ISBN 978-2-8322-4763-1 Warning! Make
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting
INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet
More informationCEN and CENELEC Organisational description & functions International and regional activities
CEN and CENELEC Organisational description & functions International and regional activities Eric Marchand Programme Manager International Cooperation, CEN-CENELEC Management centre Overview CEN and CENELEC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61975 Edition 1.0 2010-07 High-voltage direct current (HVDC) installations System tests INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 29.130.10; 31.080.01 ISBN
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright
More informationEuropean Standards and Services. Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 05 April 2011
European Standards and Services Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 05 April 2011 1 Why service standardization? Services market in the EU accounts for 60-70% of GDP and employment
More informationRoad vehicles Mopeds Symbols for controls, indicators and tell-tales
BSI Standards Publication Road vehicles Mopeds Symbols for controls, indicators and tell-tales NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH
More informationISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationUsing consumer appliances in Europe the consumer view
Using consumer appliances in Europe the consumer view February 2011 European Association for the Co-ordination of Consumer Representation in Standardisation Av. de Tervueren 32, box 27 B-1040 Brussels,
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60794-1-2 Edition 3.0 2013-09 colour inside Optical fibre cables Part 1-2: Generic specification Cross reference table for optical cable test procedures INTERNATIONAL ELECTROTECHNICAL
More informationEnvironmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers
IEC 60068-3-6 Edition 2.0 2018-01 REDLINE VERSION colour inside Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers INTERNATIONAL
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61196-1-201 Edition 1.0 2009-02 Coaxial communication cables Part 1-201: Environmental test methods Test for cold bend performance of cable INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationNational foreword. Compliance with a British Standard cannot confer immunity from legal obligations.
BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 15500-1:2017. It supersedes BS EN 15500:2008, which is withdrawn. The UK participation in its preparation was entrusted
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-10 Edition 2.0 2010-07 colour inside Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 INTERNATIONAL ELECTROTECHNICAL
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC/TS 62443-1-1 Edition 1.0 2009-07 colour inside Industrial communication networks Network and system security Part 1-1: Terminology, concepts and models INTERNATIONAL ELECTROTECHNICAL
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62785 Edition 1.0 2013-02 Guidance on the environmentally conscious design of fibre optics related products and subsystems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE L
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60228 Third edition 2004-11 s of insulated cables IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62635 Edition 1.0 2012-10 colour inside Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic
More informationFINAL DRAFT INTERNATIONAL STANDARD
IEC 62443-4-1 Edition 1.0 2017-11 FINAL DRAFT INTERNATIONAL STANDARD colour inside Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements INTERNATIONAL
More informationINTERNATIONAL STANDARD
IEC 60068-2-20 INTERNATIONAL STANDARD Edition 5.0 2008-07 Environmental testing Part 2-20: Tests Test T: Test methods for solderability and resistance to soldering heat of devices with leads INTERNATIONAL
More informationISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail
INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)
More informationTesting coated fabrics
BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard
More informationRubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard
More informationINTERNATIONAL STANDARD
IEC 61073-1 INTERNATIONAL STANDARD Edition 4.0 2009-01 Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9311-3 First edition 2005-03-01 Adhesives for thermoplastic piping systems Part 3: Test method for the determination of resistance to internal pressure Adhésifs pour systèmes
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62730 Edition 1.0 2012-03 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationTECHNICAL REPORT IEC/TR
IEC/TR 61158-1 TECHNICAL REPORT Edition 2.0 2007-11 Industrial communication networks Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series INTERNATIONAL ELECTROTECHNICAL
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62341-5-2 Edition 2.0 2019-03 colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance test methods INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationStandardization of diagnostic methods. Patrizia Rossi
Standardization of diagnostic methods Patrizia Rossi Istituto Superiore di Sanità, Rome, Italy What is a standard? International Standards provide a reference framework, or a common technological language,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-11 First edition 2004-05 Power transformers Part 11: Dry-type transformers This English-language version is derived from the original bilingual publication by leaving out
More informationHexagon thin nuts (unchamfered) Ð Product grade B
BRITISH STANDARD BS EN ISO 4036:2001 The European Standard has the status of a British Standard ICS 21.060.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Hexagon thin nuts (unchamfered)
More informationBUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements
More informationBehind the scenes of ISO 22301
Behind the scenes of ISO 22301 Stefan Tangen Secretary of ISO/TC 223 Societal security So how does standardization work in practice? Example on cargo security SWEDEN 2001 Safe Swedish rules Stakeholders
More informationMedical electrical equipment
AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62495 Edition 1.0 2011-04 Nuclear instrumentation Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
More informationThe International Electrotechnical Commission
The International Electrotechnical Commission The Vision The future of science, and particularly of electrical science, is boundless [See Report of the International Electrical Congress, Vol. I at 32 (1904)]
More informationThis is a preview - click here to buy the full publication TECHNICAL REPORT. Environmental testing
TECHNICAL REPORT IEC TR 60068-3-12 First edition 2007-03 Environmental testing Part 3-12: Supporting documentation and guidance Method to evaluate a possible lead-free solder reflow temperature profile
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC/TS 62647-21 Edition 1.0 2013-07 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 21: Program management Systems engineering
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC/TS 62668-1 Edition 1.0 2012-05 colour inside Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic
More information