This document is a preview generated by EVS

Size: px
Start display at page:

Download "This document is a preview generated by EVS"

Transcription

1 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN ISO/TR June 2016 ICS English Version Textiles - Composition testing - Identification of fibres (ISO/TR 11827:2012) Textiles - Essai de composition - Identification des fibres (ISO/TR 11827:2012) This Technical Report was approved by CEN on 22 May It has been drawn up by the Technical Committee CEN/TC 248. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TR 11827:2016 E

2 CEN ISO/TR 11827:2016 (E) European foreword This document (CEN ISO/TR 11827:2016) has been prepared by Technical Committee ISO/TC 38 Textiles in collaboration with Technical Committee CEN/TC 248 Textiles and textile products the secretariat of which is held by BSI. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of ISO/TR 11827:2012 has been approved by CEN as CEN ISO/TR 11827:2016 without any modification. 3

3 Contents Foreword...iv Introduction...v 1 Scope Safety note Normative references Terms and definitions Principle Apparatus and preparation of solutions Apparatus Preparation of solutions Techniques Microscopy Flame tests Staining Tests Solubility Tests Infrared Spectroscopy Thermal Analysis Density measurement methods Other Instrumental Methods Examples of procedures Procedure using microscopy, solubility tests and FT-IR tests (examples) Procedure using solubility tests (examples) Procedure using combustion tests and melting point determination (example) Procedure using microscopy, FT-IR analysis and thermal analysis, case of bicomponent fibres (examples)...19 Annex A (informative) Characteristics relative to fibre identification testing...24 Annex B (informative) Photomicrographs of Fibres (Light Microscopy)...29 Annex C (informative) Scanning Electron Micrographs of Fibres...34 Annex D (informative) Solubility of fibres...42 Annex E (informative) Examples of Infrared Spectra...45 Annex F (informative) Thermal transition temperature...50 Annex G (informative) Density...54 Annex H (informative) Alphabetical index of figures...55 Bibliography...58 Page ISO 2012 All rights reserved iii

4 Introduction The correct identification of fibres in textiles and the accurate determination of the composition of each fibre present is a legal requirement in many countries throughout the world for imported textile goods and at the point of sale to the public. Fibre identification can be carried out by a number of different techniques, e.g. microscopy, solubility, spectroscopy, melting point, pyrolysis, density, refractive index, etc. ISO 2012 All rights reserved v

5 TECHNICAL REPORT Textiles Composition testing Identification of fibres IMPORTANT The electronic file of this document contains colours which are considered to be useful for the correct understanding of the document. Users should therefore consider printing this document using a colour printer. 1 Scope This Technical Report describes procedures for the identification of natural and man-made fibres, and may be used, when necessary, to coordinate with methods for the quantitative analysis of fibre blends. Textile Fibres Natural fibres Man-made fibres Animal fibres Animal Hairs Vegetable fibres From Seed Mineral fibres Asbestos From organic chemistry From inorganic chemistry Wool (Sheep) Cashmer e, Mohair (Goat) Alpaca, Guanaco, Vicuna (Llama) Angora (Rabbit) Secretion fibres Silk Cotton Kapok Fr om Stem Flax Hemp Ramie Jut e Fr om leaf Sisal Alfa From Fruit Coir Artificial fibres From cellulose Viscose, Cupro Modal, Lyocell Acetate, Triacetate Others Elastodiene (from latex) Protein fibres Alginate Synthetic fibres Acrylic, Modacrylic Chlor of ibr e Fluor ofibr e Polyamide Polyester Aramid Polyimide Polyethylene Polypropylene Polylactide Elast ane Elastodiene Elastolefin Melamine Polycarbamide Tr ivinyl Elast omult iest er Polypropylene/ Polyamidebicomponent Glass Metallic fibres Cer amics Car bon Figure 1 Classification of the textile fibres in relation to their origin 2 Safety note This Technical Report calls for the use of substances/procedures that may be injurious to the health/ environment if appropriate conditions are not observed. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety/environment at any stage. ISO 2012 All rights reserved 1

6 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO , Textiles Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) ISO 2076, Textiles Man-made fibres Generic names ISO 6938, Textiles Natural fibres Generic names and definitions 4 Terms and definitions For the purposes of this document, the following terms and definitions given in ISO 2076 and ISO 6938 and the following apply. 4.1 natural fibre fibre which occurs in nature: it can be categorized according to its origin into animal, vegetable and mineral fibre 4.2 man-made fibre manufactured fibre fibre obtained by a manufacturing process artificial fibre manufactured fibre made by transformation of natural polymers (macromolecular material existing in nature) synthetic fibre manufactured fibre made from synthetic polymers (macromolecular material which has been chemically synthesised) bicomponent fibre fibre composed of two fibres forming polymer components, which are chemically or physically different or both 5 Principle Objective: identify the fibres Means: based on fibre properties (single or combination) Properties for example: Morphology Solubility Light absorption or transmission by IR Burning behaviour Thermal behaviour 2 ISO 2012 All rights reserved

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16422 October 2012 ICS 59.080.30 English Version Classification of thermoregulatory properties Classement des propriétés de thermorégulation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions) TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT CLC/TR 62125 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2008 ICS 13.020.01; 29.060.20 English version Environmental statement specific to TC 20 - Electric cables (IEC/TR 62125:2007) Déclaration

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CLC/TR 50670 December 2016 ICS 13.220.50; 27.160; 91.060.20 English Version External fire exposure to roofs in combination with photovoltaic (PV)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-7 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50131-2-11 January 2017 ICS 13.320 English Version Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 14383-5 January 2010 ICS 13.310; 91.020 English Version Prevention of crime - Urban planning and building design - Part 5: Petrol stations

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure

More information

English version. Alarm systems Terms and definitions

English version. Alarm systems Terms and definitions TECHNICAL REPORT CLC/TR 50531 RAPPORT TECHNIQUE TECHNISCHER BERICHT June 2009 ICS 01.040.13;13.320 English version Alarm systems Terms and definitions Systèmes d'alarme Termes et définitions Alarmanlagen

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT CLC/TR 62258-8 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2008 ICS 31.080.99 English version Semiconductor die products - Part 8: EXPRESS model schema for data exchange (IEC/TR 62258-8:2008)

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50131-2-9 September 2016 ICS 13.320 English Version Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17221 April 2018 ICS 91.140.70 English Version Guidance on the application of CE marking and preparation of Declaration of Performance for

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50621 June 2016 ICS 33.180.10 English Version Guideline for the repair of damaged installed optical fibre cables and microducts

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 54-32 July 2015 ICS 13.220.20; 13.320 English Version Fire detection and fire alarm systems - Part 32: Planning, design,

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 1833-16:2010 Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) EESTI STANDARDI EESSÕNA Käesolev

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CLC/TR 50682 June 2018 ICS 33.180.01 English Version Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

English version. OPC unified architecture - Part 1: Overview and concepts (IEC/TR :2010)

English version. OPC unified architecture - Part 1: Overview and concepts (IEC/TR :2010) TECHNICAL REPORT CLC/TR 62541-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2010 ICS 25.040.40; 35.100.01 English version OPC unified architecture - Part 1: Overview and concepts (IEC/TR 62541-1:2010)

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16705 April 2014 ICS 13.310 English Version Perimeter protection - Performance classification methodology Protection périmétrique - Méthode

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 12977-1 April 2010 ICS 27.160 Supersedes ENV 12977-1:2001 English Version Thermal solar systems and components - Custom built

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15378-2 April 2017 ICS 91.140.10; 91.120.10 English Version Energy performance of buildings - Heating systems and DHW in buildings - Part 2:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16629 July 2014 ICS 91.140.99 English Version Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

ILNAS-EN 62560:2012/A1:2015

ILNAS-EN 62560:2012/A1:2015 ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions

More information

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden

More information

English version. Precast concrete products - Full-scale testing requirements in standards on precast concrete products

English version. Precast concrete products - Full-scale testing requirements in standards on precast concrete products TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 14862 September 2004 ICS 91.100.30 English version Precast concrete products - Full-scale testing requirements in standards on precast concrete

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50625-3-1 January 2015 ICS 29.100.01; 13.030.99; 31.220.01 English Version Collection, logistics & treatment requirements

More information

English Version. Daylight of buildings

English Version. Daylight of buildings EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-18 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns Surfaces for sports areas - Determination of tensile strength of synthetic yarns EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16637-1 August 2014 ICS 19.040; 13.040.20; 91.100.01 English Version Construction products - Assessment of release of dangerous

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16410-1 October 2011 ICS 35.240.60; 03.220.20 English Version Electronic fee collection - Evaluation of equipment for

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004) SVENSK STANDARD SS-EN ISO 5263-1:2004 Fastställd 2004-10-01 Utgåva 1 Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) Pulps Laboratory wet disintegration Part

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 1833-10:2010 Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) EESTI STANDARDI

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

Bitumen and bituminous binders - Specifications for paving grade bitumens

Bitumen and bituminous binders - Specifications for paving grade bitumens Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12101-4 December 2006 ICS 13.220.20; 23.120 English Version Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and

More information

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED

More information

Gas meters - Additional functionalities

Gas meters - Additional functionalities Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions Thermal spraying - Components with thermally sprayed coatings - Technical supply

More information

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item ÍST EN 13823:2010+A1:2014 Gildistaka 1.3.2015 ICS: 13.22 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item Staðfestur

More information

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards CEN 2015 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-4 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation

More information

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

Sýnishorn General requirements for components used in drains and sewers

Sýnishorn General requirements for components used in drains and sewers ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

Hot rolled flat products made of high yield strength steels for cold forming

Hot rolled flat products made of high yield strength steels for cold forming ÖNORM EN 10149-2 Edition: 2013-11-01 Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels Warmgewalzte

More information

General requirements for establishing anthropometric databases (ISO 15535:2012)

General requirements for establishing anthropometric databases (ISO 15535:2012) Irish Standard I.S. EN ISO 15535:2012 General requirements for establishing anthropometric databases (ISO 15535:2012) CEN 2012 No copying without NSAI permission except as permitted by copyright law. The

More information

English version. Management Centre: Avenue Marnix 17, B Brussels

English version. Management Centre: Avenue Marnix 17, B Brussels TECHNICAL REPORT CLC/TR 62061-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2010 ICS 13.110; 25.040.99; 29.020 English version Guidance on the application of ISO 13849-1 and IEC 62061 in the design of

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS

More information

Irish Standard I.S. EN ISO :2013

Irish Standard I.S. EN ISO :2013 Irish Standard I.S. EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14959:2006 Touch and close fasteners - Determination of resistance to fraying after washing Touch and close fasteners - Determination of resistance to fraying after washing EESTI

More information

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14972 May 2008 ICS 13.220.20 English Version Fixed firefighting systems - Watermist systems - Design and installation Installations

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

Geregistreerde Belgische norm

Geregistreerde Belgische norm ICS: 79.080 Geregistreerde Belgische norm NBN EN 13442 2e uitg., mei 2013 Normklasse: B 16 Houten vloeren en wand- en plafondbetimmeringen van hout - Bepaling van de weerstand tegen chemische stoffen Planchers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15310-4 November 2006 ICS 13.030.10; 13.030.20 English Version Characterization of waste - Sampling of waste materials - Part 4: Guidance on

More information