EU Declaration of Conformity Annex
|
|
|
- Anthony Pierce
- 5 years ago
- Views:
Transcription
1
2 The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 60155: A1: A2:2007 EN : A1: A2: EN : A1: A2: EN : EN : EN : 1989 EN : EN : A1:2011 EN : 1997 EN : 1998 EN : A1:1997 Glow-starters for fluorescent lamps Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) Luminaires Part 1: General requirements and tests Luminaires Part 2-1: Particular requirements Fixed general purpose luminaires Luminaires Part 2-2: Particular requirements Recessed luminaires Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting Luminaires Part 2-4: Particular requirements Portable general purpose luminaires Luminaires Part 2-5: Particular requirements Floodlights Luminaires Part 2-6: Particular requirements Luminaires with built-in transformers for filament lamps EN : A2: A13:1997 Luminaires Part 2-7: Particular requirements Portable luminaires for garden use EN : EN : 2003 EN : EN : EN : 2010 EN : 2014 EN : A11: A1: A12: AC: A2: EN 60968: + A11:2014 EN 61195: A1: Luminaires Part 2-8 : Particular requirements Handlamps Luminaires Part 2-10: Particular requirements Portable luminaires for children Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights Luminaires Part 2-13: Particular requirements Ground recessed luminaires Luminaires Part 2-20: Particular requirements Lighting chains Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting Information technology equipment Safety Part 1: General requirements Self-ballasted lamps for general lighting services Safety requirements Double-capped fluorescent lamps Safety specifications 2/6
3 The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 61199: A1: EN : 2008+A1:2011+A2: EN : Corr A1: Corr Corr A2:2014 EN : EN : Corr EN : EN : Corrigendum: A1: Corrigendum:2010 EN : EN : A1: Corrigendum:2010 EN : 2001 EN : A1: Corr.2010 EN : 2014 EN 61549: A1: A2: A3: EN 62031: A1: EN 62034: EN 62035: A1: A2: EN : AC: Single-capped fluorescent lamps Safety specifications Lamp controlgear Part 1: General and safety requirements Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) Lamp controlgear Part 2-2: Particular requirements for d. c. or a. c. supplied electronic step-down convertors for filament lamps Lamp controlgear Part 2-3: Particular requirements for a. c. and/or d. c. supplied electronic ballasts for fluorescent lamps Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps Lamp controlgear Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires Lamp controlgear Part 2-12: Particular requirements for d. c. or a. c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) Lamp controlgear Part 2-13: Particular requirements for d. c. or a. c. supplied electronic controlgear for LED modules Miscellaneous lamps LED modules for general lighting Safety specifications Automatic test systems for battery powered emergency escape lighting Discharge lamps (excluding fluorescent lamps) Safety specifications Audio/video, information and communication technology equipment Part 1: Safety requirements 3/6
4 The conformity of the designated product(s) with the provisions of the European Low Voltage Directive Directive is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 62493: EN 62532: 2011 EN 62560: + A1: + AC: EN : 2004+A12009 EN 62471: 2008 EN 62733: Assessment of lighting equipment related to human exposure to electromagnetic fields Fluorescent induction lamps Safety specifications Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches (IEC :2002, modified) / Corrected and reprinted in Photobiological safety of lamps and lamp systems Programmable components in elctronic lamp controlgear 4/6
5 The conformity of the designated product(s) with the provisions of the European EMC Directive is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 55015: + A1: EN : 2014 EN : EN 61547: 2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low voltage supply systems, for equipment with rated current 16 A per phase and not subjected to conditional connection Equipment for general lighting purposes EMC immunity requirements EN 50498: 2010 Electromagnetic compatibility (EMC) Product family standard for aftermarket electronic equipment in vehicles 5/6
6 Attached list POSIVO LED flat 3.000K, 0MJ2712L18830 POSIVO LED flat 4.000K, 0MJ2712L /6
EU Declaration of Conformity Annex
EU Declaration of Conformity Annex Document number: 2016 / 9C1-3423710-EN-00 The conformity of the designated product(s) with the provisions of the European radio equipment Directive is given by the compliance
EC-Declaration of Conformity Annex
EC-Declaration of Conformity Annex Document number: / ZCI-2987462-DOC-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance
EU Declaration of Conformity Annex
The conformity of the designated product(s) with the provisions of the European Low Voltage Directive, /35/EU, is given by the compliance with the following European Standard(s) or other specifications.
EU Declaration of Conformity Annex
2017 / 9C1- The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications.
EC-Declaration of Conformity
Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany 1/6 Brand name or trade mark: Product type: Product designation: OSRAM Lamp controlgear QTP-OPTIMAL See attached
EC-Declaration of Conformity
Document number: 1/5 Manufacturer or representative: OSRAM AG Address: Hellabrunner Straße 1 81543 München Germany Brand name or trade mark: Product type: Product designation: LED module LS_LRXXX-Linear
2014 / ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. OSRAM Lamp controlgear QUICKTRONIC. M See attached list
OSRAM H Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM Lamp controlgear QUICKTRONIC M
2013 / ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. OSRAM LED module LF05A/E-P. M See attached list
OSRAM m Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: / ZCI-2853521 -DOC-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany
EU Declaration of Conformity
Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: 2015/ 9C1-3290710-EN-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM
EC-Declaration of Conformity OSRAM J
EC-Declaration of Conformity OSRAM J Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: / ZCI-2790030-DOC-00 OSRAM GmbH Marcel-Breuer-Str.
EU Declaration of Conformity
Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: 2016 / 9C1-3378799-EN-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Gerrnany OSRAM
EU eclaration of Conformity
EU eclaration of Conformity Document num ber: 2016 / 27 / 1D Manufacturer or representative: Radium Lampenwerk GmbH Lampenwerk Wipperfürth Address: Dr. Eugen-Kersting-Str. 6 D-51688 Wipperfürth Germany
EC-Declaration of Conformity
!OSRAM Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM Self-ballasted LED lamp Lightify
Parkring Garching Germany. OSRAM Double-capped LED Lamp SubstiTUBE T8 ADVANCED HF El See attached list
0 LEDVANCE Document number: 2016 / 9C1-3424019-EN-00 Manufacturer or representative: LEDVANCE GmbH Address: Parkring 29-33 85748 Garching Germany Brand name or trade nnark: Product type: Product designation:
EC-Declaration of Conformity
V V! i bsram Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM Self-ballasted LED lamp Lightify
EU Declaration of Conformity Lampenwerk Wipperfürth
Lampenwerk Wipperfürth Document number: 2016 / 26 / 1D Manufacturer or representative: Radium Lampenwerk GmbH Address: Dr. Eugen-Kersting-Str. 6 D-51688 Wipperfürth Germany Brand name or trade mark: Product
EC-Declaration of Conformity
Manufacturer or representative: OSRAM GmbH 1/6 Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM as specified below DALI Professional
ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. Auxiliary Equipment LS/PD AP KIT. See attached list
OSRAM Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: ZCI-3054178-DOC-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM
2015 /9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany. LED module PL-LIN-HV-DC-G1. M see attached list
Manufacturer's Declaration of Conformity with International Standards OSRAM fi Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: OSRAM
10.6 Schedule of Accreditation
Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Stafford Park 7 Telford Shropshire TF3 3BQ Contact: Mr Tariq Malik Tel: +44 (0)1952 290907 Fax: +44 (0)1952 290908 E-Mail: lab@thelia.org.uk Website: www.lialab.org.uk Testing performed at the above address
List of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements
Updated on 13 November 2015 List of Harmonised Standards for EEE *or any newer edition No. Agreed edition* of IEC Standards for ASEAN Harmonization Standard Title Scope of Standard 1 IEC 60065 Ed.7.0(2001)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. 1 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 Thailand Mr. Dirk Fleischer (Quality
INDONESIAN MANDATORY EE STANDARDS (26 Products) as of 12 Feb 2016
INDONEIAN MANDATORY EE TANDARD (26 Products) as of 12 Feb 2016 Domestic tandards mandaty TANDARD tandards Incandescent lamps NI 04-3560-1994 V IEC 60064 Ed.6 (1993-12) elf-ballast lamp f general lighting
Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services
Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services www.intertek.com/lighting 1 Identifying Product Safety Requirements for Your Target Markets
Joint CELMA / ELC Guide on LED related standards
Joint CELMA / ELC Guide on LED related standards 2 nd Edition, April 2010 www.celma.org www.elcfed.org Document CELMA LED(AH)003C TABLE OF CONTENT 1. Key Standards Safety & Performance... 3 2. Key Standards
Reflector T2 and GU10 6,000 hours
Reflector T2 and GU1 6, hours 11watt SES E14 Small Screw Cap Equivalent to 6watt R63 information CFL Reflector and GU1 6, hours lamps offer traditional incandescent and halogen shapes and sizes, long life
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager
AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations
Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 1680.1:2006 Interior and workplace lighting - Part 1: General principles and recommendations Table of Contents
EN Light And Lighting - Measurement And Presentation Of Photometric Data Of Lamps And Luminaires - Part 1: Measurement And File Format
IAS Accreditation Number TL-553 Company Name Address Via delle Industrie 5 & 6, 20061 Carugate (MI), Italy Contact Name Dario Rivoltella, Laboratory Manager Telephone +39 02 92526427 Effective Date of
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche kkreditierungsstelle GmbH nnex to the ccreditation Certificate D-PL-12061-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.03.2018 to 16.06.2021 Holder of certificate: VDE Prüf-
10.6 Scope of Accreditation
Testing Laboratory Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-23 to 2022-05-22 Date of issue: 2017-05-23
Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12121-01-00 according to ISO/IEC 17025:2005 Period of validity: 24.03.2017 to 30.09.2019 Holder of certificate: STC (Dongguan)
THE HIGH STAIRWELL AND PASSAGEWAY FIXTURE PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Luminaire Series for Stairwells, Bathrooms, Passageways, and General Illumination KEY FEATURES INCLUDE: Multiple Color Options Three color options ensure that the new lighting
10.6 Schedule of Accreditation
Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying products,
AS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
THE HIGH STAIRWELL AND PASSAGEWAY FIXTURE PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Luminaire Series for Stairwells, Bathrooms, Passageways, and General Illumination KEY FEATURES INCLUDE: Multiple Color Options Three color options ensure that the new lighting
IAS Accreditation Number
IAS Accreditation Number Company Name Address Contact Name Telephone +86 769 86858888 Effective Date of Scope November 2, 2017 Accreditation Standard ISO/IEC 17025:2005 TL-460 PuLongCun 69, Puxinhu Industrial
Electromagnetic compatibility (EMC)
Electromagnetic compatibility (EMC) Relevant standards for commercial cleaning machines Contents Foreword......................................... 2 Introduction.......................................
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61000-3-2 Edition 2.2 2004-11 Edition 2:2000 consolidated with amendment 1:2001 and 2:2004 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions
(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
11.11.2010 EN Official Journal of the European Union C 306/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
LED Linear Design Highlights
LED Linear Design Highlights Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade Aluminum and 9 (23cm) [min] of perimeter conductive surface. Multiple Color Options Three
C 271/32 Official Journal of the European Union
C 271/32 Official Journal of the European Union 12.11.2003 Commission communication in the framework of the implementation of the Council Directive 89/336/EEC (2003/C 271/04) (Text with EEA relevance)
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60598-1 Edition 6.1 2006-09 Edition 6:2003 consolidated with amendment 1:2006 Luminaires Part 1: General requirements and tests This English-language version is derived from
Government Notices
Government Notice No. 200 of 2017 Government Notices 2017 1265 THE CONSUMER PROTECTION ACT Regulations made by the Minister under section 4 of the Consumer Protection Act 1. These regulations may be cited
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 173/05)
C 173/142 EN Official Journal of the European Union 13.5.2016 Commission communication in the framework of the implementation of Directive 2014/30/EU of the European Parliament and of the Council on the
THE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE: LED Fixture Series for General, Direct and Indirect Illumination
THE HIGH PERFORMANCE LED Fixture Series for General, Direct and Indirect Illumination KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade Aluminum
(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 293/03)
12.8.2016 EN Official Journal of the European Union C 293/29 Commission communication in the framework of the implementation of Directive 2014/30/EU of the European Parliament and of the Council on the
(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
13.7.2018 EN Official Journal of the European Union C 246/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
Consumer Protection (Safety Requirements) (Amendment) Regulations 2017
Consumer Protection (Safety Requirements) (Amendment) Regulations 2017 GN No. 200 of 2017 Government Gazette of Mauritius No. 95 of 7 October 2017 THE CONSUMER PROTECTION ACT Regulations made by the Minister
10.6 Schedule of Accreditation
Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying
(Notices) EUROPEAN COMMISSION
14.8.2012 Official Journal of the European Union C 245/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization. Designation of a Notified Body
.... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that
Supplement. Title: 365 Users Supplement Issue: 8 Part Number: Issue Date: 7/16 Print Date: August 2010 Page Count: 6 Revision/Date:
Supplement Title: 365 Users Supplement Issue: 8 Part Number: 3622684 Issue Date: 7/16 Print Date: August 2010 Page Count: 6 Revision/Date: This supplement contains information necessary to ensure the accuracy
Designed for testing three-phase circuits up to 600V Install on line or load side of electrical disconnect Detects absence of AC and DC voltage
Product Bulletin VeriSafe Absence of Voltage The Safe Way to Verify the Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification
(Notices) EUROPEAN COMMISSION
23.10.2012 Official Journal of the European Union C 321/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
CE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization. Designation of a Notified Body
... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that Bureau
Listing of standards providing presumption of conformity for List (2) products under Regulation BD
BD-142004-01 List Standards Listing Listing of standards providing presumption of conformity for List products under Regulation BD-142004-01 Ed. 1.0 -February 2018 2018-02-18 The standard references below
Annex 7: Harmonised Standards for Products covered by Ecodesign and Energy Labelling Regulations. Page 1 of 26
Annex 7: s for Products covered by Ecodesign and Energy Labelling Regulations Page 1 of 26 1 List of Product Groups with European s Table 1.1 presents the European harmonised standards for the 12 product
ANNEX. to the. Proposal for a Council Decision. on the conclusion of the Free Trade Agreement between the European Union and the Republic of Singapore
EUROPEAN COMMISSION Brussels, 18.4.2018 COM(2018) 196 final ANNEX 3 ANNEX to the Proposal for a Council Decision on the conclusion of the Free Trade Agreement between the European Union and the Republic
Overview of International Lighting Standards Steve Coyne Director, Light Naturally UNEP Consultant
Overview of International Lighting Standards Steve Coyne Director, Light Naturally UNEP Consultant International Standards Bodies: Relevant to Lighting International Organisations International Organisation
Lum. Flux** [lm] 6500 K 1700 lm
![Lum. Flux** [lm] 6500 K 1700 lm](/thumbs/72/66357771.jpg "Lum. Flux** [lm] 6500 K 1700 lm")
www.osram.com SubstiTUBE Value XXX-HF Datasheet Innovative LED-lamp, easy and safe to use in ECG installations as direct retrofit. Energy saving potential of up to 47% by replacing 1.2 m T8 fluorescent
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone:
TC 34 prepares International Standards for lamps and other related equipment.
IEC/TC or SC 34 SMB/4650/SBP STRATEGIC BUSINESS PLAN (SBP) Secretariat Date United Kingdom November 2011 Please ensure this form is annexed to the Report to the Standardization Management Board if it has
De accreditatie werd uitgereikt aan/ L'accréditation est délivrée à/ The accreditation is granted to/ Die akkreditierung wurde erteilt für:
Bijlage bij accreditatie-certificaat Annexe au certificat d'accréditation Annex to the accreditation certificate Beilage zur Akkreditatierungszertifikat 472-TEST NBN EN ISO/IEC 17025:2005 Versie/Version/Fassung
Notice That Particular Low Voltage or Extra-low Voltage Fittings or Appliances are Declared Medium Risk Articles
Notice That Particular Low Voltage or Extra-low Voltage Fittings or Appliances are Declared Medium Risk Articles Pursuant to Regulation 83 of the Electricity (Safety) Regulations 2010, I, Mark Stephen
AS/NZS IEC 62560:2014
AS/NZS IEC 62560:2014 (IEC 62560-2011 Ed 1.0, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications AS/NZS IEC 62560:2014 AS/NZS
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COSMOS CORPORATION 1 718-1, Katsurase-Cho Matsusaka-shi, Mie 515-1104 JAPAN Akira Sakai (Authorized Representative) +81 598-30-6211 sakai-akira@cosmos-corp.com
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 Contact: Mrs G Baker Woodfieldside Business Park Tel: +44 (0)1495 229219 Pontllanfraith Fax: +44 (0)1495 228331 Blackwood E-Mail: ginnie.baker@kiwa.co.uk
This document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60092-306 Edition 4.0 2009-11 Electrical installations in ships Part 306: Equipment Luminaires and lighting accessories IEC 60092-306:2009(E) THIS PUBLICATION IS COPYRIGHT PROTECTED
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 5 25800 Commercentre Dr. Lake Forest, CA 92630 Mr. Jay Kogoma Phone: 949-448-4100 ELECTRICAL Valid to: December 31, 2017
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Stable Court Contact: Mark Richens Oakley Tel: +44 (0)1630 658568 Nr Market Drayton Fax: +44 (0)1630 658921 Shropshire E-Mail: mark@cranage.co.uk
Installation instructions
SmartBalance Wall-mounted WL484W Installation instructions Instructions de montage Montageanleitung Montage instruktie Istruzioni di montaggio Instrucciones de montaje Instruções de montagem Monteringsinstruktioner
Product Bulletin. VeriSafe Absence of Voltage Tester. The Safe Way to Verify the Absence of Voltage.
Product Bulletin VeriSafe Absence of Voltage The Safe Way to Verify Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 9 - Electrical equipment and systems for railways IEC 62888-2 Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring
Mains-related EMC-issues associated with Lighting Equipment. P.A. Beeckman PGI/Philips Innovation Services EMC Kennismarkt Oost - October 12, 2012
Mains-related EMC-issues associated with Lighting Equipment P.A. Beeckman PGI/Philips Innovation Services EMC Kennismarkt Oost - October 12, 2012 EMC Center Philips Innovation Services Modeling & Simulations
1 General Description
1 General Description LED Tube Light adopts the new type LED as the light source, using the standard TB tube's end caps, makes it easy to install and replace the traditional fluorescent lamp. The TRF-51894
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Wallace Way Tern Valley Business Park Market Drayton Shropshire TF9 3AG Contact: Mark Richens Tel: +44 (0) 1630 658568 E-Mail: mark@cranage.co.uk
IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
Lighting Laboratory. Ensuring the performances and compliance of your lamps and luminaires
Lighting Laboratory Ensuring the performances and compliance of your and luminaires > Accredited tests and calibrations > Independent approach, neutral results > Compliance with all relevant standards
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-7 Edition 5.0 2015-06 Explosive atmospheres Part 7: Equipment protection by increased safety ''e'' INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.260.20 ISBN 978-2-8322-2710-7
ILNAS-EN 62560:2012/A1:2015
ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions
Customs Procedures. (Import & Export) Control on importation of electrical appliances and. accessories
Control on importation of electrical appliances and Customs Procedures accessories (Import & Export) Consumer Protection (Safety Requirements) Regulations 2017 Presented by: MRA Customs 1st March 2017
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Product Test Centre 15 Progress Road Eastwood Leigh-on-Sea Essex SS9 5JA Contact: Mr S Bailey Tel: +44 (0)1702 425738 E-Mail: stuart.bailey@honeywell.com
THAILAND REGULATORY BODY LEGISLATIVE FRAMEWORK RATIONALE FOR REGULATION. Consumer Protection.
THAILAND I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Thailand Consumer Protection. II. REGULATION BODY COUNTRY Thailand REGULATORY BODY Thai Industrial tandards Institute (TII) under the
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, 200 070, People's Republic of China Testing Location:
AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017
AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 7240-29 First edition 2017-06 Fire detection and alarm systems Part 29: Video fire detectors Systèmes de détection et d alarme d incendie Partie 29: Titre manque Reference
NSW Government Notice
Schedule 1 Declared Electrical Articles Interpretation: In this schedule a reference to- AS/NZS 60335.1 means AS/NZS 60335.1:2011+A1-3; AS/NZS 3100 means AS/NZS 3100:2009+A1-4; AS/NZS 60745.1 means AS/NZS
Five ways to save energy. Sales Director Thorn Energy Solutions
Five ways to save energy Nick Clark MSLL Sales Director Thorn Energy Solutions Introduction Nick Clark SD, Thorn Energy Solutions turnkey propositions Thorn Lighting statement of intent to - Aid businesses
ACMA mandated EMC standards
Part 1 Generic standards Item No. Applicable Standard Full Title of Standard Publication Date equipment type Standard being replaced AS/NZS 61000.6.3: 2012 30/04/2012 AS/NZS 61000.6.3: 2007 14/10/2015
SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY
As of June 2016 SINGAPORE I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Singapore SPRING Singapore III. LEGISLATIVE
INDONESIA REGULATORY BODY. as of 3 November 2017 I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY RATIONALE FOR REGULATION
I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY INDONESIA I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Indonesia Consumer Protection II. REGULATION BODY COUNTRY REGULATORY
AS/NZS :2015
AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998
Luminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY
As of October 2017 SINGAPORE I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Singapore SPRING Singapore III. LEGISLATIVE