High Pressure Conductivity Monitor

Size: px

Start display at page:

Download "High Pressure Conductivity Monitor"

Delphia Jenkins
5 years ago
Views:

1 Product Data Sheet PDS 71-EDS880/1/rev.A August 2006 Model EDS880/1 High Pressure Conductivity Monitor COMPLETE SYSTEM FOR THE DETERMINATION OF CONDUCTIVITY IN HIGH PRESSURE SYSTEMS SENSOR INSTALLS DIRECTLY IN HIGH PRESSURE LINES AND VESSELS NO O-RING SEALS. All welded construction with zirconium oxide insulator FEATURE-PACKED ANALYZER WITH DUAL OUTPUTS, three fully programmable alarm relays and dedicated fault alarm, bright three-line display, and optional HART and PID and TPC control APPLICATIONS The Model EDS880/1 is a high pressure conductivity sensor intended for applications where the use of a reducedpressure sidestream sample is impractical. The Model EDS880/1 sensor is used with the Model 54eC conductivity analyzer. FEATURES The Model EDS880/1 sensor is suitable for direct installation in high pressure (up to 2880 psig) lines and vessels. Rugged all-welded construction there are no O-rings ensures long life. The sensor insertion length is adjustable; however, once the length has been set, it cannot be changed. The sensor has a detachable cable, so there is no need to rerun cable when the sensor is replaced. Conductivity depends on temperature. Variations in sample temperature alter the conductivity even though the concentration of dissolved salts causing the conductivity remains constant. A Pt 1000 RTD in the sensor allows the analyzer to automatically correct for temperature related conductivity changes. The user can select among three temperature correction algorithms. The Model 54eC analyzer has a rugged NEMA4X weatherproof, corrosion-resistant enclosure suitable for panel, pipe, or wall mounting. A large, backlit, three-line dot matrix display continuously indicates conductivity, temperature, and two user-selectable process parameters, such as alarm setpoint or diagnostic variables. Menu screens are simple and intuitive and are available in English, Spanish, German, Italian, or French. Two independent isolated outputs provide either a 0-20 ma or 4-20 ma output. Outputs are fully programmable. The controller option allows PID control acting on conductivity or temperature. Three fully programmable process alarms are standard. One relay is a dedicated fault alarm to alert the user to an instrument or sensor fault or failure. The TPC option allows any programmable alarm relay to be used for Time Proportional Control. The Model 54eC is a member of the Rosemount SMART FAMILY 1 of instruments. It is designed to communicate with the Model 375 HART 2 communicator or any host that supports the HART communication protocol. 1 SMART FAMILY is a registered trademark of Rosemount Inc. 2 HART is a registered trademark of the HART Communication Foundation.

2 SAMPLE REQUIREMENTS Temperature: ºF (0-200ºC) Maximum Pressure: 2880 psig (20,000 kpa abs) Conductivity range (at sample temperature): μs/cm SPECIFICATIONS SENSOR Cell constant: 0.3/cm (nominal). Factory-determined cell constant engraved on label Process connection: M25 male with copper gasket Wetted materials: titanium and zirconium oxide Maximum cable length: 164 ft (50 m) Weight/shipping weight: 2 lb/3 lb (1 kg/1.5 kg) SPECIFICATIONS PROCESS CONNECTION ADAPTER Adapter: 1 inch MNPT x M25 female Wetted materials: 316 stainless steel Weight/shipping weight: 1 lb/1 lb (0.5 kg/0.5 kg) SPECIFICATIONS ANALYZER Case: Epoxy-painted cast aluminum, NEMA4X (IP65). Dimensions: 5.7 x 5.7 x 5.2 in. (144 x 144 x 132 mm), DIN size panel cut-out. Front Panel: Membrane keypad with tactile feedback. Three green LEDs indicate alarm status. Red LED indicates fault condition. Conduit Openings: Accepts PG 13.5 or 1/2 inch conduit fittings Display: Three-line, back-lit, dot matrix LCD, 70 x 35 mm. First line is measurement reading. Second line is temperature and current output. Third line is userselectable. Character heights: 1st line - 16 mm (0.6 in.), 2nd and 3rd lines - 7 mm (0.3 in.). Ambient Temperature and Humidity: 0 to 50 C (32 to 122 F). 95% (maximum) non-condensing. Analyzer can be operated between -20 and 60 C (-4 to 140 F) with some degradation in display quality. Power: Vac ± 10%, 50/60 Hz ± 6%, 8 W Vac ± 10%, 50/60 Hz ± 6%, 8 W Hazardous Location: Applies to analyzer only. Class I,Division 2, Groups A, B, C, & D. T5 Ta=50 C. Dust ignition proof: Class II, Division 1, Groups E, F, & G; Class III. FM:Max. relay contact rating: 28 Vdc resistive 150 ma - Groups A & B; 400 ma - Group C; 540 ma - Group D CSA: Max. relay contact rating: 28 Vdc; 110 Vac; 230 Vac; 6 amps resistive. Enclosure Type 4. RFI/EMI: EN LVD: EN Outputs: Two 4-20 ma or 0-20 ma isolated outputs. Continuously adjustable. Outputs can be assigned to chlorine or temperature. Output dampening is user-selectable. Maximum load at 115/230 Vac is 600Ω. Maximum load at 100/200 Vac is 550Ω. Output 1 has superimposed HART signal (code -09). Outputs can be programmed for PID control (code -20). Alarms: Relay 1 - Process, Interval, or Time Proportional Control (TPC requires code -20) Relay 2 - Process, Interval, or Time Proportional Control (TPC requires code -20) Relay 3 - Process, Interval, or Time Proportional Control (TPC requires code -20) Relay 4 - Sensor/analyzer and process fault alarm Each relay has a dedicated LED on the front panel. Relay Contacts: Relays 1-3: Epoxy sealed form A contacts, SPST, normally open Relay 4: Epoxy sealed form C, SPDT Resistive Inductive 28 Vdc 5.0 Amps 3.0 Amps 115 Vac 5.0 Amps 3.0 Amps 230 Vac 5.0 Amps 1.5 Amps Weight/Shipping Weight*: 5 lb/6 lb (2 kg/2.5 kg) * Weights and shipping weights are rounded up to the nearest 1 ib (0.5 kg) 2 Rosemount Analytical

3 in mm Figure 1: Model EDS880/1 Rosemount Analytical 3

4 WHEN INCH AND METRIC DIMS ARE GIVEN MILLIMETER INCH Figure 2: Model 54eC Analyzer (Pipe and Wall Mounting) 4 Rosemount Analytical

5 WHEN INCH AND METRIC DIMS ARE GIVEN MILLIMETER INCH Figure 3: Model 54eC Analyzer (Panel Mounting) Rosemount Analytical 5

ORDERING INFORMATION The Model EDS880/1 is a high pressure sensor suitable for direct insertion into process lines having pressure as high as 2880 psig (20,000 kpa).

MODEL EDS880/1 EDS880/1 DESCRIPTION High pressure conductivity sensor EXAMPLE Cable and process connector (if needed) must be ordered separately. See Accessories.

24 VDC Power CODE OPTIONS 09 HART communications protocol 20 Controller outputs PID and TPC 54eC-01-09 EXAMPLE ACCESSORIES PN DESCRIPTION 9999999-99SQ Process connection

of PG 13.5) 0240048-00 Stainless steel tag (specify marking) The right people, the right answers, right now. ON-LINE ORDERING NOW AVAILABLE ON OUR WEB SITE http://www.

6 ORDERING INFORMATION The Model EDS880/1 is a high pressure sensor suitable for direct insertion into process lines having pressure as high as 2880 psig (20,000 kpa). It is intended for use with the 54eC analyzer. Cable must be ordered separately. MODEL EDS880/1 EDS880/1 DESCRIPTION High pressure conductivity sensor EXAMPLE Cable and process connector (if needed) must be ordered separately. See Accessories. Order the 54eC analyzer using the matrix below: MODEL 54eC DESCRIPTION Microprocessor analyzer for conductivity CODE REQUIRED SELECTION /230 VAC, 50/60 Hz Power VDC Power CODE OPTIONS 09 HART communications protocol 20 Controller outputs PID and TPC 54eC EXAMPLE ACCESSORIES PN DESCRIPTION SQ Process connection adapter (1 inch MNPT X M25 female) SQ9475 ER539 Cable, specify length Wall and 2-inch pipe mounting kit Panel mounting kit Cable gland kit (Qty 5 of PG 13.5) Stainless steel tag (specify marking) The right people, the right answers, right now. ON-LINE ORDERING NOW AVAILABLE ON OUR WEB SITE Specifications subject to change without notice. Credit Cards for U.S. Purchases Only. Emerson Process Management Liquid Division 2400 Barranca Parkway Irvine, CA USA Tel: (949) Fax: (949) Rosemount Analytical Inc. 2006

Free Chlorine Measuring System

Product Data Sheet PDS 71-FCL/rev.H September 2008 Model FCL Free Chlorine Measuring System COMPLETE SYSTEM INCLUDES sensor, connecting cable, analyzer, and flow controller. CONTINUOUS ph CORRECTION eliminates