B5512 Control Panels. Intrusion Alarm Systems B5512 Control Panels.

Transcription

1 Intrsion Alarm Systems B5512 Control Panels B5512 Control Panels Spports p to 48 points sing a combination of hardwired or wireless points for installation flexibility and p to 4 areas with perimeter and interior control On-board Ethernet port for Conettix IP alarm commnication and remote programming, compatible with modern IP networks inclding IPv6/ IPv4, Ato-IP, and Universal Plg and Play Installer-friendly featres inclding on-board USB for easy on-site RPS programming, pls plg-in PSTN and Celllar commnication modles for simple installation and ftre proof pgrades Notifications with and text messaging, and the Remote Secrity Control app for Android and ios mobile devices Programmable keypad shortcts, sitation sensitive on-screen help, and a bilingal ser interface make system operation simple and easy The B5512 Control Panel integrates intrsion and residential fire, providing one simple ser interface for both systems. The B5512 provides p to 48 individally identified points that can be split into 4 areas. The control panel incldes a bilt-in Ethernet port for IP network commnications, and is compatible with modles that send events to selected pblic switched telephone network (PSTN), IP network, or celllar network destinations throgh for programmable rote grops. With the B5512, yo can monitor doors, windows, and motion within areas like showrooms or those that hold inventory. Each ser can have a personalized passcode, a wireless keyfob, and a credential to control the system. Use programmable athority levels with restricted privileges to provide service, secrity, and cleaning personnel with fll or limited access. Use the three programmable otpts (expandable p to 43) to trn on lights or lock and nlock doors. Users can: Trn on the system to secre the stockroom while yo condct daily bsiness. Perform tests to ensre yor system is working properly. Set yor system to alarm immediately if a door opens. Activate the Watch featre so a tone sonds whenever a cstomer enters. Set a schedle for yor system to atomatically trn on at closing time. Use wireless secrity options to cstomize yor system.

2 2 B5512 Control Panels Central monitoring stations provide 24-hor system monitoring with access to vital services. Professional secrity personnel can test the system, monitor system activity, and alert the police, fire department, or other emergency response teams if necessary. Fnctions Programmable otpts 500 ma not to exceed 1.3 A total crrent for a brglary system, or not to exceed 1.0 A total crrent for hosehold fire applications 800 ma axiliary power at 12 VDC For alarm-otpt patterns Programmable bell test Three programmable otpts; one high crrent sing a relay, and two trigger otpts Otpt A contact rating is 3 Amps System response High-performance micro-controller provides indstry leading system response 20 cstom point indexes Selectable point response time Selectable EOL resistor configration, single or dal Cross point capability Fire alarm verification Dangeros gas indicator incldes carbon monoxide (NFPA 720) Watch mode Schedled events (SKEDs) perform several fnctions, sch as trn on (arm) the system, trn off (disarm) the system, bypass and nbypass points, and control relays User interface Spervision of p to 8 keypads Cstom keypad text is flly programmable throgh RPS Fll fnction men inclding cstom fnctions Athority by area and 32 character name for each ser 14 cstom athority levels control ser s athority to change, add, or delete passcodes to disarm or bypass areas; and to start system tests Programmable primary and secondary langage by ser and keypad; select from English, Spanish, French, and Portgese Area configrations Area programming offers a wide selection of different system configrations. Make area arming conditional on other areas (master or associate), if desired. Yo can configre any area for perimeter and interior arming, not reqiring a separate area for this fnction. Link mltiple areas to a shared area which is atomatically controlled (hallway or lobby). For higher secrity applications, the Area Re-Arm featre garantees that areas are always rearmed, and are disarmed for no longer than a specific, configrable, amont of time (for example, service time). Cstom fnctions For added convenience, the installer can program cstom fnctions that allow cstomers to complete complex tasks with one simple action. For example, a cstom fnction can bypass a grop of points and arm the system, allowing the ser to perform these fnctions with one easy command. Users can activate cstom fnctions with a keypad, keyfob, token, or card, or the control panel can activate a fnction in reaction to a falted point, or atomatically throgh a schedled event (SKED). Passcode secrity Two-man rle. Reqires two people with two niqe passcodes to be present at the time of opening. Early ambsh. Allows sers to verify that the facility is safe by reqiring two passcodes. The control panel sends a dress event if the ser does not enter the passcode a second time after inspecting the premises. Dal athentication. Reqires two forms of identification before processing certain system commands, inclding trning off the system and opening doors. A standard system ser mst have a passcode, a credential (token or card), and appropriate command athority permissions assigned in the door and keypad s assigned area. Easy exit control The control panel changes from one On (armed) state to another withot trning off (disarming) the system. For example, if yo change the state from Part On (Perimeter Arm) to All On (Master Arm), the control panel complies and reports the change. Easy Exit Control redces the nmber of keystrokes, simplifying system operation. Programmable passcode-controlled men list Passcode-controlled shortcts provide sers only with the options and information pertinent to them, simplifying system operation. Flexible control The system provides the flexibility to choose added convenience or high secrity. For example, yo can restrict to a keypad's immediate local area trning on (arming) and trning off (disarming) the system with a passcode, even if the ser has access to other areas. This is particlarly sefl for high secrity areas, where a ser may have access to the area, bt wold prefer to only trn off (disarm) the area individally rather than with the rest of the system. Monitor Delay/Delayed Response Create a special point index that delays the reaction of a point for a specified time (p to 1 hor in mintes and seconds). This delay provides time for the specified condition to reset before activating any annnciation. The system can annnciate locally and send a report, if desired. When the system is armed, the point can respond like a normal point providing dal fnctionality. Use this featre to ensre that

3 3 B5512 Control Panels perimeter doors have not been propped open, or to monitor critical areas sch as compter rooms and safes, for example. System sers The system spports p to 50 sers. Each ser can have a personalized passcode, a wireless keyfob, and a credential to control the system. Yo can assign passcodes to one of 14 cstomized athority levels in each area that can be restricted to operate only dring certain times. Programmable primary and secondary langage by ser and keypad; select from English, Spanish, French, and Portgese. Commnication formats The control panel prioritizes and sends reports to for rote grops. Network and phone commnications can se either the Modem4 or the Contact ID commnications formats. Each grop has a programmable primary and backp destination. The control panel provides flexible commnications for most central stations with reporting capabilities sch as: Individal point nmbers Opening or closing reports by ser and area nmber Remote programming attempts Diagnostic reports IP commnication The control panel can se on-board Ethernet (IP) connection (the on-board Ethernet port is exclded on E versions) to commnicate with a Conettix D6600 or a Conettix D6100IPv6 Commnications Receiver/ Gateway. The control panel can optionally se a B426 Conettix Ethernet Commnication Modle or a Conettix Plg-in Celllar Commnicator (B440/B441/B442/B443). Using Conettix IP commnication offers a secre path that incldes anti-replay/anti-sbstittion featres and provides enhanced secrity with AES 256-bit encryption (sing Cipher Block Chaining (CBC)). The control panel spports Domain Name System (DNS) for both remote programming and central station commnication. DNS provides ease of se, eliminating the need to se static IP addresses as yor reporting destination, and accommodates a simple soltion for central station disaster recovery. IP Setp is easy, eliminating the need to se complicated internet programming tools sch as ARP and Telnet. The control panel spports both IPv6 and IPv4 networks. Commnication paths The control panel accommodates p to for separate phone and for separate network paths to the central station receiver. When resetting alarms or trning a system on and off, the ser is identified by name and nmber. Personal notification The control panel can send text messages and s for personal notification over Ethernet or sing a celllar commnicator. Yo can configre p to 16 destinations sing a combination of celllar phone nmbers and addresses. The control panel sends notifications in the ser s programmed primary langage. Firmware pdates The system allows remote firmware pdates throgh Remote Programming Software (RPS) sing the RPS Firmware Update Wizard. The Firmware Update Wizard ses the on-board USB connection or the on-board Ethernet (IP) connection (the on-board Ethernet port is exclded on E versions) to transmit firmware pdates. The control panel can optionally receive firmware pdates from RPS sing a B426 Conettix Ethernet Commnication Modle or a Conettix Plg-in Celllar Commnicator (B440/B441/B442/B443). Notice! Celllar firmware pdates reqire more time than Ethernet pdates and carrier data rates apply. Control panel pdates. Remotely pdate the control panel firmware for easy featre enhancements withot replacing ROM chips. Modle pdate spport. Remotely pdate the firmware on connected SDI2 modles for easy featre enhancements withot visiting each individal modle. A wide variety of inpt options Each point: Accommodates normally open (NO) and normally closed (NC) devices with end of line (EOL) resistor spervision. Accepts programming for fire, gas, fire spervisory, or intrsion applications. Spports hardwired and wireless devices. Spports IP cameras by Bosch as point sorces. Secrity and fire detection The control panel provides eight on-board points, and p to 40 additional off-board points (depending on model and expansion interfaces). Yo can program individal points to monitor some types of brglar alarms, fire alarms, and spervision devices. Event log The event log stores local and reported events. The event log incldes information sch as time, date, event, area, point, and ser. View the event log from a keypad or se RPS to remotely retrieve event information. When the event log reaches a programmed threshold of stored events, it can send an optional report to a receiver. The event log stores p to 255 local and reported events.

4 4 B5512 Control Panels Schedled events (SKEDs) The internal clock and calendar start individally schedled events (SKEDs). SKEDs perform fnctions sch as trn on or off, relay control, or point bypassing. The control panel offers: Five schedled events with p to 25 different fnctions For opening windows and for closing windows For ser windows Day-of-week, date-of-month, or holiday only schedles One holiday schedle of 366 days (leap year) Programming Installers can perform limited programming on-site with a keypad (critical parameters; sch as accont IDs, central station and RPS IP addresses and phone nmbers, reporting formats, and more). They can also do fll programming on-site or remotely (attended or nattended) with RPS. A programmable system passcode prevents nathorized remote programming. Diagnostics Keypads and RPS offer diagnostic help for monitoring and trobleshooting. The diagnostics featres allow yo to view the stats of the wired and wireless devices. The featres provide the stats of the control panel and its connected devices, sch as firmware version, power, and missing conditions. View the stats of each area. Bosch Video Management System integration With Bosch Video Management System (Bosch VMS) and an intrsion system, the VMS operator has a single ser interface to monitor and control the intrsion system combined with video srveillance. With Bosch VMS and a control panel, the operator can, for example: View videos triggered by intrsion events, inclding all relevant information sch as areas, point, and ser show in the display with the event View areas, points, otpts, and doors with their statses on the Bosch VMS map, providing the exact location in the system. Trn on (arm) and trn off (disarm) areas. Bypass and nbypass points. Reqirements to integrate Bosch VMS with a control panel: A licensed Bosch VMS system sing Professional Editions v5.5 or higher or Bosch VMS Enterprise Edition v5.5 or higher. Expansion license to integrate the intrsion control panel. One license needed per control panel. Order nmber MBX-XINT-xx for the expansion license added to a Bosch VMS base license. Refer to the Bosch Video Management Software prodct page on the Bosch website, Access to Remote Programming Software (RPS). Certifications and approvals Region USA Region USA Canada Certification ANSI/ SIA Certification CSFM FCC C C C C C C CP Control Panel Standard - Featres for False Alarm Redction Police Station Connected Brglar Alarm Units Standard for Local Brglar Alarm Units and Systems Holdp Alarm Units and Systems Hosehold Fire Warning System Units Hosehold Brglar Alarm System Units Proprietary Brglar Alarm Units and Systems Central Station Brglar Alarm Units see or website Part 15 Class B Installation/configration notes Compatible prodcts Keypads CAN/C S303 - Local Brglar Alarm Units and Systems CAN/C S304 - Standard for Signal Receiving Center and Premise Brglar Alarm CAN/C S545 - Residential Fire Warning System Control Units C-ORD C Hosehold Brglar Alarm System Units C-ORD C Proprietary Brglar Alarm Units and Systems B942/B942W Toch Screen Keypad (SDI2) B930 ATM Style Alphanmeric Keypad (SDI2) (SDI2) B921C Two-line Capacitive Keypad (SDI2) B920 Two-line Alphanmeric Keypad (SDI2) B915/B915I Basic Keypad (SDI2) Transformers CX4010 Plg-in Transformer (18 VAC 22 VA 60 Hz) ICP TR1822 CAN Plg in Transformer (110 VAC primary, 18 VAC 22 VA secondary)

5 5 B5512 Control Panels Enclosres B10 Medim Control Panel Enclosre B11 Small Control Panel Enclosre B12 Monting Plate for D8103 Enclosre D2203 Enclosre D8103 Universal Enclosre (reqires a B12) D8108A Attack Resistant Enclosre (reqires a B12) D8109 Fire Enclosre (reqires a B12) Accessories B56 B56 Keypad Srface Mont Box B96 Keypad Trim Bezel B99 USB Direct Connect Cable B Interconnect wiring cables (pack of 10) Detectors D285/TH Photoelectric Smoke Detector Heads FCC-380 Carbon Monoxide Detector Bosch conventional detectors, inclding Professional Series, Ble Line Gen2, Ble Line, Classic Line, Commercial Line, and Ceiling Mont motion detectors, as well as glass break, seismic, reqest-to-exit, photoelectric, heat, and smoke detectors. Modles B201 2-wire Powered Loop Modle B208 Octo-inpt Modle B308 Octo-otpt Modle B426 Conettix Ethernet Commnication Modle B430 Plg-in Telephone Commnicator B440 Conettix Plg-in Celllar Commnicator B441 Conettix Plg-in Celllar Commnicator B442 Conettix Plg-in Celllar Commnicator (Latin America) B443 Conettix Plg-in Celllar Commnicator (Canada) B450 Conettix Plg-in Commnicator Interface B520 Axiliary Power Spply Modle B810 wireless receiver (RADION) B820 SDI2 Inovonics Interface Modle D113 Battery Lead Spervision Modle D125B Dal Class B Initiating Modle D129 Class A Initiating Modle D130 Axiliary Relay Modle D132A Smoke Detector Reversing Relay Modle D133/D134 Relay Modle D185 Reverse Polarity Signaling Modle D192G Class B, Style Y Bell Circit Spervision Applications Remote Programming Software (RPS or RPS LITE) v5.17 and higher Bosch Video Management System v5.5 and higher Conettix receivers (Managed and configred with Conettix D6200 Programming/ Administration Software v2.00) Conettix D6600 Commnications Receiver/Gateway (with only D6641 line cards installed) with CPU version Conettix D6100IPv6 Commnications Receiver/Gateway with CPU version Conettix D6100i Commnications Receiver/Gateway with CPU version RADION wireless from Bosch B810 wireless receiver (RADION) RFBT-A bill trap RFDL-11-A TriTech motion detector RFDW-RM-A recessed mont door/window contact RFDW-SM-A srface mont door/window contact RFGB-A glass break detector RFIN-A inertia detector RFKF-A two-btton keyfob RFKF-FB-A for-btton keyfob RFKF-TB-A two-btton keyfob RFPB-SB-A single-btton panic RFPB-TB-A two-btton panic RFRP-A repeater RFSM-A smoke detector RFPR-12-A PIR motion detector RFPR-C12-A PIR crtain motion detector RFUN-A niversal transmitter Inovonics Wireless B820 SDI2 Inovonics Interface Modle ENKIT-SDI2 SDI2 Inovonics Interface and Receiver Kit. Incldes B820 and EN4200 EN1210 Universal Transmitter (Single-inpt)

6 6 B5512 Control Panels EN1210EOL Universal Transmitter with EOL Resistor EN1210W Door-Window Transmitter with Reed Switch EN1215EOL Universal Transmitter with Wall Tamper, Reed Switch, and EOL Resistor EN1223D Water resistant Pendant Transmitter (Doble btton) EN1223S Water resistant Pendant Transmitter (Single btton) EN1224-ON Mltiple-Condition Pendant Transmitter EN1233D Necklace Pendant Transmitter (Doble-btton) EN1233S Necklace Pendant Transmitter (Single-btton) EN1235D Beltclip Pendant Transmitter (Doble-btton) EN1235DF Fixed-location Transmitter (Doble-btton) EN1235S Beltclip Pendant Transmitter (Single-btton) EN1235SF Fixed-location Transmitter (Single-btton) EN1247 Glass-break Detector Transmitter EN1249 Bill Trap Transmitter EN1242 Smoke Detector Transmitter EN1260 Wall Mont Motion Detector EN1261HT High Traffic Motion Detector EN1262 Motion Detector with Pet Immnity EN Ceiling Mont Motion Detector EN4200 Serial Receiver EN5040-T High Power Repeater with Transformer Parts inclded Installation Gide Owner s Manal Release Notes SIA Qick Reference Gide 1 Literatre CD containing prodct literatre Technical specifications Commnications Ethernet Environmental considerations One on-board Ethernet connector* Relative hmidity 5% to 93% at +90 (+32 ), non condensing Temperatre (operating) Nmber of Areas 4 Cstom fnctions 4 Events Up to 255 Passcode sers +32 F to +122 F (0 C to +49 C) 50, pls 1 Installer passcode Points 48 (8 on board, p to 40 off board) Programmable otpts 43 (3 on board, p to 40 off board) RF points 40 SKEDs 5 Power Reqirements The B5512 incldes the following: Crrent draw (maximm) Idle 125 ma; Alarm 155 ma Qant. Component Otpt (alarm) 1.3 A at 12 VDC 1 B5512 control panel 1 Literatre pack Installation Instrctions Owner s Manal Release Notes SIA Qick Reference Gide 1 Literatre CD containing prodct literatre Each B5512E control panel kit incldes the following: Qant. Component 1 B5512E control panel (withot on-board Ethernet port) 1 Plg-in commnicator (telephone or celllar, depending on the kit) 1 Plg-in Transformer (18 VAC 22 VA 60 Hz) 1 Control panel enclosre (kit dependent) Otpt (axiliary, continos power, and switched axiliary combined) Voltage (operating): 800 ma at 12 VDC nominal 12 VDC nominal Voltage (AC) CX4010 Plg-in Transformer (18 VAC 22 VA 60 Hz) or ICP TR1822 CAN Plg in Transformer (110 VAC primary, 18 VAC 22 VA secondary) *The E control panels do not inclde an on-board Ethernet connector. Trademarks All hardware and software prodct names sed in this docment are likely to be registered trademarks and mst be treated accordingly. 1 Literatre pack

7 7 B5512 Control Panels Ordering information B5512 Control Panel The B5512 is available individally or in kits. For kits, refer to Qick Selection Gide (B Series Kits) on the Docments tab of the control panel s Prodct Page at s.boschsecrity.com. Order nmber B5512 B5512E Control Panel The B5512E is available only in kits. For kits, refer to Qick Selection Gide (B Series Kits) on the Docments tab of the control panel s Prodct Page at s.boschsecrity.com. Order nmber B5512E B520 Axiliary Power Spply Modle Provides axiliary power to 12VDC devices or to SDI2 modles. Order nmber B520 B520 Kit, B10 Enclosre B520 Axiliary Power Spply kit. Incldes a TR1850 transformer and a B10 White, steel enclosre. Order nmber B520-B B520 Kit, D8103 Enclosre B520 Axiliary Power Spply kit. Incldes a TR1850 transformer, a B12 monting plate, and a D8103 Gray, steel enclosre. Order nmber B520-C B201 2-wire Powered Loop Modle The modle provides a single powered initiating device circit. The modle spports compatible 12 V 2-wire smoke detectors. It also spports connecting brglary devices to the control panel. Order nmber B201 B208 Octo-inpt Modle Provides 8 programmable inpts. Order nmber B208 B308 Octo-otpt Modle Provides 8 programmable relays. Order nmber B308 D122 Dal Battery Harness Harness with circit breaker. Connects two batteries to a compatible control panel. Order nmber D122 D122L Dal Battery Harness with Long Leads Color-coded harness with circit breaker and leads measring 89 cm (35 in.). Connects 12 V batteries to compatible control panels. Order nmber D122L D126 Standby Battery (12 V, 7 Ah) A rechargeable sealed lead acid power spply sed as a secondary power spply or in axiliary or ancillary fnctions. Order nmber D126 D1218 Battery (12 V, 18 Ah) A 12 V sealed lead acid battery for standby and axiliary power with two bolt fastened terminals. Incldes hardware for attaching battery leads or spade connectors Order nmber D1218 CX4010 Plg in Transformer For se in North America. 110 VAC primary voltage inpt. 18 VAC, 22 VA secondary inpt. Order nmber CX4010 TR1850-CA Transformer For se in Canada. Plg-in transformer with inpt: 120 VAC, 60 Hz, 0.50 A; otpt 18 VAC, 50 VA otpt. Order nmber TR1850-CA D8004 Transformer Enclosre For applications sch as fire alarm that might reqire a transformer enclosre. Order nmber D8004 B8103 Enclosre White steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Order nmber B8103 D8103 Enclosre Grey steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Order nmber D8103 D8108A Attack Resistant Enclosre Grey steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Listed. Incldes lock and key set. B520, B4512, and B5512 reqire the B12 monting plate. Order nmber D8108A D8109 Fire Enclosre Red steel enclosre measring 40.6 cm x 40.6 cm x 8.9 cm (16 in. x 16 in. x 3.5 in). Listed. Incldes a lock and key set. Order nmber D8109 B10 Medim Control Panel Enclosre White, steel enclosre. Accepts an optional lock and tamper switch. Measres 35.6 cm x 31.8 cm x 7.6 cm (14 in x 12.5 in x 3 in). Order nmber B10 B11 Small Control Panel Enclosre White, steel enclosre. Accepts an optional lock and tamper switch. Measres 27.8 cm x 25.9 cm x 8.32 cm (10.9 in x 10.2 in x 3.3 in). Order nmber B11 B12 Monting Plate for D8103 Enclosre Reqired for monting select control panels and other devices in D8103, D8108A, D8109, or BATB Battery Box enclosres. Order nmber B12

8 8 B5512 Control Panels D101 Lock and Key Set Short-body lock set with one key spplied. Uses the D102 (#1358) replacement key. Order nmber D101 D110 Tamper Switch Screw on tamper switch that fits all enclosres. Shipped in packages of two. Order nmber D110 ICP EZTS Dal Tamper Switch Combination tamper switch with a wire loop for additional tamper otpts. Order nmber ICP-EZTS RPS Kit (USB) Accont management and control panel programming software with USB secrity key (dongle). Order nmber D5500C-USB Accessories SDI2 Inovonics Interface and Receiver Kit Kit containing B820 and EN4200 for se on SDI2 bs panels. Order nmber ENKIT-SDI2 Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 130 Perinton Parkway Fairport, New York, 14450, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems 11 Bishan Street 21 Singapore Phone: Fax: apr.secritysystems@bosch.com Bilding, No. 333 Fqan Road North IBP Changning District, Shanghai China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems 2016 Data sbject to change withot notice en, V28, 07. Jan 2016