Dual-Network LCD Keyboard Intelligent Alarm

Size: px
Start display at page:

Download "Dual-Network LCD Keyboard Intelligent Alarm"

Transcription

1 Dual-Network LCD Keyboard Intelligent Alarm Model: 5900G Brand: KERUI Secrui Electronic Co., Ltd Standards 2004/108/EC (CE directive): Hereby, Secrui Electronic Co., Ltd declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC Weee Directive: 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose it at designated collection points. For more information see: RoHs Directive: 2002/95/EC RoHS Compliant. Hereby Secrui Electronic Co., Ltd declares that this device does not contain lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) in more than the percentage specified by EU directive 2002/95/EC, except exemptions stated in EU directive 2002/95/EC annex. These product are Type B Moveable devices and is suitable for use in systems designed to comply with EN , EN , EN , EN , EN , EN 14604:2005 and PD6662 at Grade 2 & 3 and Environmental Class II and IV. Version 2.0 Page 1 of 38

2 Table of Content 1. Introduction 1.1 General...Description System...Features 3 2. Anatomy of...thelcddual-networkintelligenceburglaralarm System...ComponentsandUsage System...Setup 6 3 Installation of...panel Alarm...PanelInitialSetup Pre-record...VoiceMessage Add Remote...Control: Delete...theremotecontrol: Add...detector Delete...detector 11 4 Command Reference Commands...forConfiguration Commands...ofSystemEnquiries SMS...Commands 28 5 Remote Control...ofPanel After...receivingthePanelAlert: Remote...DialingInOperation: 31 6 Types of Alarm...Zone Definitions...ofZones System...defaultzonetypesare: Other...SystemDefault Fitting...parameters: 34 7 Guideline of...installationsensors Guideline...forInstallingDoororWindowSensor Guideline...forInstallingPIRMotionSensor 35 8 Troubleshooting Version 2.0 Page 2 of 38

3 1. Introduction 1.1 General Description This LCD system English large-screen GSM alarm system is equipped with dual network technologies and suitable for both home and commercial use. It uses the advanced GSM digital signal process technology, GSM Wireless mobile and traditional PSTN landline networks with intelligent alarm system. It has highly integrated digital voice, SMS, self-learning wireless communication code, remote appliance control and text messaging technologies. The alarm provides automatic voice or SMS message as notifications for incidents. It is a choice of stability, reliability, security, and user friendliness. Features are very practical, cost-effective, completed configuration and ease of use. This large LCD display alarm can integrate with a lot of alarm accessories including door sensor, smoke detectors, gas detectors, emergency buttons and other accessories to build a powerful security setup. It has been widely used in homes, factories, schools, shops, convenience stores, financial and banking workplace, community centre and residential area to provide protection to valuable assets. 1.2 System Features Large LCD Large english blue back-light display, voice prompt, ease of use. Support dual-network of both PSTN landline and GSM mobile network, provide redundancy for extra stability. Can check status and call records from panel. Allow up to 99 wireless defense zones and 4 wired zones. Each can be defined as one of the 8 zone types including NORMAL, STAY, INTELLIGENT, EMERGENCY, CLOSED, HELP SENIOR, WELCOME and CHIME. Four sets of scheduled disarmed function, each time disarmed you can select the included period of time and different defense zone, eliminating of need of the manual procedure, realizing the beauty of automatic controls. Support configuration via phone ( handset ) or SMS. messages to System Setup text messaging costs associated with the alarm panel. 6 group voice alarm phone number for alert calling, 3 group phone number for help senior, 6 group for SMS messaging, numbers saved inside EEPROM without lost upon power failure. Different zones can dial a pre-set telephone number. Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice message is 10 seconds. Telephone (phone) long-distance telephone control for arming, disarming, monitoring, remote announcement. 1 Set of normally open signal outputs, relay linkage output, home appliances remote control can be realized. Wireless intelligent study coding, compatible with PT2262 normal encoding and Version 2.0 Page 3 of 38

4 a 1527 encoding, convenient and flexible for adding or reducing accessories. Maximum support 100 remote control and 150 sensors. Unique black box features, you can display most recent 72 disarmed records and 102 recent alarm recording. Accurately shows the alarm time and control code. Built-in Ni-Hi rechargeable battery and automatically switchable upon power failure, and notification will be sent via SMS. Panel integrated with either dual-band, triple-band, quad-band GSM/GPRS industrial graded module, stable and reliable. Version 2.0 Page 4 of 38

5 2. Anatomy of the LCD Dual-network Intelligence Burglar Alarm 2.1 System Components and Usage ARM The system is at a fully ready status where all detectors are activated in a working state, when the some events ( burglar, fire, gas leak, etc ) happened and detected,, alarm system alarm right away. In a ARM status, the panel [ ARM ] light is on, LCD screen show "ARM" is also on. To activate using remote control: press [ ARM ] key once. To activate using keyboard: on panel keyboard [ ARM ] keys once. STAY ARM This is for partial arming of the alarm system when there are people at home, only some of the selected sensors are activated and could be triggered by events. In a STAY ARM status, the panel [ STAY ] light is on, LCD screen show " STAY " is also on. To activate using remote control: press [STAY] key once. To activate using keyboard: on panel keyboard [STAY] keys once. DISARM All sensors are deactivated and will not be respond to any events. In a DISARM status, the panel [ ARM ] light is off, LCD screen show " DISARM " is on. To activate using remote control: press [DISARM] key once. To activate using keyboard: on panel keyboard [DISARM] keys once. EMERGENCY When an emergency occurs, press emergency button on the remote or the * button on panel to activate alarm. Version 2.0 Page 5 of 38

6 Remark: If password on keyboard is enabled, you need to enter password before other operations, the initial password is System Setup Panel Setup Alarm panel should be installed at a central location with best transmission to all the wireless sensors and accessories. Keep the panel well away from large metal objects or household appliances with high-frequency interference, and avoid barriers such as concrete walls with metal frame inside and fire doors. Alarm panel Version 2.0 Page 6 of 38

7 2.2.2 Connections of Cables Version 2.0 Page 7 of 38

8 2.2.3 SIM Card installation SIM card installation is simple. Firstly remove the cover of SIM card slot at the back of the alarm panel and then place the card according to direction indicated. Make sure the cover of SIM card slot is fixed suitably Summary of Indicators Function Indications Description Built-in speaker short "beep" once Confirming key signal received "beep", "beep" two short Exit configuration or learnt tones succeed "beep", "beep", "beep" Error indication three short tones Voice prompt The function and status of the prompt voice Power LED Light up and "power" icon Panel power is normal display on LCD Light up and "battery" icon Alarm panel external display on LCD power disconnect, using battery Is off Alarm panel without power supply ARM LED Light up and "STAY Alarm panel at STAY ARM" icon display on ARM state LCD Version 2.0 Page 8 of 38

9 Longlight up and Alarm panel at NORMAL "NORMAL ARM" icon ARM state display on LCD Flashing Is changing to the DELAY ARM Is off Alarm panel at DISARM Siren LED Light Alarming, LCD display specific information Flashing Is changing to the DELAY ARM Status LED Light Panel at the configuration mode Flashing Panel at the enquiry mode Display on LCD the GSM GSM Signal "flashing Searching GSM Signal Signal, SIM card Status GSM Signal " light GSM Good signal and external telephone line SIM Card " not light Indicates that no plug SIM Card SIM Card " light SIM Card loaded correctly "Telephone line" not light No connected the external telephone line "Telephone line" light External phone line connected properly Version 2.0 Page 9 of 38

10 3 Installation of Panel 3.1 Alarm Panel Initial Setup Load the SIM Card, connect telephone line, fix the GSM Antenna, connect the power and other cables if any, then power up alarm panel. The alarm panel voice prompt "Welcome to the intelligent voice alarm", and start self-test the GSM network, LCD shows "GSM signal" flashing while searching GSM Signal (it takes about 10 seconds or so for searching). "GSM signal" light means GSM signals and SIM card are normal. LCD show "telephone line" indicates the external telephone line connection is good. Upon everything working properly, the battery switch should be at the [ON] position for continuous charging. 3.2 Pre-record Voice Message Alarm panel will play a pre-recorded voice message after the alarm call when a preset phone number upon alarm. To record customized message: Press "# "Key to enter the configuration mode: Then press 19#,speak your message at the panel for recording System will record 10 Seconds and then automatically exit; or press any key to end whenever your message end. Press *, then # exit setup status. 3.3 Add Remote Control: Press "#" key to enter the configuration mode: 07+(00~99)+# to configure remote control Example: 07 then press 01#, to configure the 1st remote control. then press any key of the remote control to send a signal to the alarm panel, panel beep twice means successful, beep only once means the remote control has been configured before. Alarm panel can configure up to 150 remote control of different addressing. Upon completion press # to exit the configuration mode, press * and then # exit the configuration mode. 3.4 Delete the remote control: Press "# "Key to enter the configuration mode: Version 2.0 Page 10 of 38

11 Syntax 1: 08+(00~99)+# to delete remote control Syntax 2: 08+**+# to delete all remote controls Example: 08 then press 01# for deleting 1st remote control, then if you want to delete 8th remote control, press 08 instead of 01. Press # to exit the delete remote control, press * and then # to exit configuration mode. 3.5 Add detector Press "# "Key to enter the configuration mode: 09+(00~99)+# to set the detector Example: 09 then press 01#, to configure 1st sensor, then trigger the detector to send a signal to the alarm panel. panel beep twice means successful, beep only once means the remote control has been configured before. Alarm panel can configure up to 150 sensors of different addressing. Upon completion press # to exit the configuration mode, press * and then # exit the configuration mode. 3.6 Delete detector Press "# "Key to enter the configuration mode: Syntax 1: 10+(00~99)+# to delete the detector Syntax 1: 10+**+# to delete the detector Example: 10 then 01#, to deleting 1st sensor. If you want to delete the 6th detectors, use 06 instead of 01. Upon completion press # to exit the configuration mode, press * and then # exit the configuration mode. Version 2.0 Page 11 of 38

12 4 Command Reference This system supports three methods of configuration including the local keyboard, telephone set and SMS messaging. Following are examples how instructions are given via one of the three methods of setting Example: you want to change the first phone number for voice calling to : Method 1: At the Keyboard Press # to enter the configuration mode, and then press #, press the * then press # to exit configuration mode. Method 2: By telephone set Calling into the alarm panel, upon connected, alarm panel will ask for password, it is 1234 as the default, then press #, and then press #, press the * then press # to exit configuration mode. Method 3: Using SMS On your mobile phone, compose a SMS message as # and send send to your alarm panel. Remark: The status LED is lit on the panel to indicate at the configuration mode, the status light is off upon exit. Version 2.0 Page 12 of 38

13 Below is a table of all commands supported. 4.1 Commands for Configuration Set up voie alarm phone number "Phone number" + # To set the 1st group to the 9th group of voice alarm phone number 1-9 indicates that the first group to the Nineth group alarm number correspondingly. Example: If the user wants to set for the first set of voice alarm phone number Method one: After you press the # key to enter the configuration mode, press the #, * Then press # To exit Setup. Remote calling into the alarm panel put in password (initial password: 1234 ) when being asked, then press the # key, hear the voice prompt and then press #, then press # to exit the remote setting status. Send SMS messages # to a alarm panel (which at the beginning of 1234 is the user password), the alarm panel will reply with SMS message " 1 Group phone number : to confirm the 1st group alarm phone number is set to successfully. For users using the telephone line extension, you should dial a number (such as "9") to pick up a dialing tone, then with your command you should add to this number a " * ". So the completed command becomes 9* # Remark: 7,8,9 group number for HELP SENIOR zone and panel will only dial these three groups number when that specific zone alarming. Version 2.0 Page 13 of 38

14 Delete voice alarm Used to delete the first groups to the Nineth group alert phone number phone numbers Example: If you want to delete the first set of telephone alarm number, Method one: After you press the # key to enter the configuration mode, + # press the 31#, then press * then press # to exit Setup. After entering the telephone remote setting status, press 31#. Send SMS message # On the alarm panel, alarm panel reply " 1 Group phone number to confirm the 1st group alarm phone number has been removed. Set phone number To set the first group to the sixth group of phone number for to receive SMS SMS message. When alarm panel is alert, it sends a SMS message message to the six sets of numbers one by one. Example: If the user wants to set SMS for the first group of SMS message + "Phone number" Method one: + # After press the # key to enter the configuration mode, press the #, then press * then press # Exit Setup press # Send SMS message # to the panel. Delete SMS number phone Used to delete the first group to SMS of the Nineth group police number Example: If you want to delete the first set of SMS message phone number, + # Method one: After you press the # key to enter the configuration mode, press the 41#, then press * then press # Exit Setup press41# Send SMS message123441# Version 2.0 Page 14 of 38

15 Password Used to modify the user password, the default user password modification is 1234 Example: If you want to set up a new user password 4321 Method one: 50 + "Four Press # key to enter the configuration mode, press the new password" #, press the * then press # to exit setup. # press # Send SMS message # Set delay for Upon armed from the remote control or alarm panel, the system arm alarm panel is set to delay 0-99 before at the ready status of ARM. The system default is 00 seconds Example: users need to set the delay time for 60 Seconds Second " Method one: + # Press # key to enter the configuration mode, press the 5160#, then * then press # to exit setup. press5160# Send SMS messages # Set the time of Set the time of delay upon alram, it can be set to 0-99 delay for alarming seconds, the system default is 00 seconds. Example: the user needs to set the alarm delay time to Seconds Second Method one: + # Press # Key to enter the configuration mode, press the 5260#, and * then press # to exit setup. press 5260#. Send SMS message # Version 2.0 Page 15 of 38

16 Set length of Siren sound Set alarm length of sounding when panel when the alarm, could be set to 0-20 minutes, factory default is 1 minute. Example: you want to make a siren sound 5 Minutes Method one: Minute " # Key to enter the configuration mode, press the 5305#, + # * Then press # To exit Setup. press 5305#. Send SMS messages # Set the scope of Set which defense zone will be controlled by remote control control of alarm and from alarm panel keyboard. Factory default is all remote panel and remote control and keyboard can control all zones. control Remark: The 1 st remote control represented by number 01, ** 54 + represents the alarm panel keyboard. Remote control Example: you want to set 01 remote control to control only number 00~ zone. Starting defense Method one: area 00~99 + # Key to enter the configuration mode, press # End of defense Example: you want to set the alarm panel keyboard control zone 00~ Defense zone. # Method one: # Key to enter the configuration mode, press 54**0050#, * then press # To exit Setup. press 54**0050# Send SMS message **0050# Set audible 1 means on and 0 means closed, the default is on. confirmation for Example: set panel sound when remote control number 01 is remote control sending signal. operation Method one: Pressing # to entering the setup, and then press55010#, * 55 + then press # to exit setup. Remote control number 00~99 + 0/1 + # press 55010#. Send SMS messages # Set date and time Set the system date and time settings An example: it is now 1 st of July of : 00 : 00 am Version 2.0 Page 16 of 38

17 Method one: 56 + # to enter the configuration mode, press the "4-digits year" #, * then press # to exit Setup The Month Day + press # Hour Send SMS message # Second " + # Version 2.0 Page 17 of 38

18 Scheduled arm and To set the time for scheduled arm and disarm, it allows set at disarm time setting most four group of time for arm and disarm. Example: set up the first group scheduled time to arm at 22 : 00 pm and disarm at 07 : 00 am, this is valid for 57 + Group Monday, Tuesday, Wednesday, Thursday and Friday of each number 01~04 week. + AAAA Method one: Scheduled time of # enter the configuration mode, and then press arm + BBBB # Scheduled disarmed Example: set up the second group scheduled time to arm at time + 12 : 00 and disarm at 13 : 00 pm, this is valid for all 7 Number days of each week. week + # Method one: # enter the configuration mode, and then press #, * then press # to exit Setup. then press #. Send SMS message # Scheduled arm and Used to set when the four group of zone to be controlled by disarm zones scheduled arm and disarm settings Example: To set up the first group scheduled arm and disarm control defense zone Method one: Group number Press # enter the setup status and press #, * then 01~04 + press # exit Setup Defense zone begin the area code press # Defense zone ends area code + Send SMS message # # Version 2.0 Page 18 of 38

19 Set the type of To set 99 zone type, represents 0-99 zone number, defense zone 1-8 represents one of the 8 zone type: 1. NORMAL STAY ARM zone 3. INTELLIGENT number EMERGENCY Type + 0/1 5. CLOSED + # 6. CHIME 7. WELCOME 8. HELP SENIOR The last 0/1 represents 0 siren of panel produce no sound upon alarming while 1 is sounded. Example: Set zone number 2 as STAY zone type, and siren not sound upon alarming2. Method one: # Key enters the configuration mode, press #, * then press # To exit Setup. press # Send SMS message # Set mode of wired Set wired alarm zone to NO or NC. The zone number of alarm zone are wired defense zones, system default is are wired zones with NO mode. 0 means NO and 1 means NC Example: Set 51 zone to NC, 61 + zone Method one: number # Key enters the configuration mode, press 61511# 0/1 + # * Then press # To exit Setup. press 61511# Send SMS message # Remark: On the back pane of the alarm panel 51 = zone 1 and labelled Z1 52 = zone 2 and labelled Z2 53 = zone 3 and labelled Z3 54 = zone 4 and labelled Z4 Set Remote This enable or disable the remote operation of alarm panel Operation on or off using telephone. System default is on. Version 2.0 Page 19 of 38

20 Example: turn off the remote setting function, /1 Method one: + # #, and then press 620#, * then press # To exit Setup. press 620# Send SMS message # Assign specific System default is all defense zone will make call from phone number to the first to sixth group phone number upon alarming. certain zone Example: user needs to call the first, second, third set of numbers Method one: Defense #, and then press # zone begin the area Example: users need to zone alarm the fourth, the fifth code and the sixth group number. Defense zone ends Method one: area code + #, And then press # Police group Example: User want zone 21 call only the 5th group number. number Method one: + # #, and then press #. press #. Send SMS message # Set audible Alarm panel will produce audible confirmation beep upon confirmation from receipt of signal from remote control. 1 is on, 0 is off, default panel to on or off is on. Example: users need to disable the audible confirmation Method one: 0/1 + # # then press 110#, press the * then press # Exit Setup press 110# Send SMS messages # Version 2.0 Page 20 of 38

21 Enable or disable 1 is on and 0 is off. Default is on the SMS Messaging Example: the user will need to turn off the text messaging feature 12 + Method one: 0/1 + # # Then press 120#, press * then press # exit setup status press 120# Send SMS message # Enable or disable of Cut the phone cord will trigger the alert. 0 is off and 1 on, the anti-tampering system defaults to closed. of telephone cord Example: user need to enable anti-tampering of telephone cord feature 13 + Method one: 0/1 + # Press # Then press 131#, * then press # to exit Setup press 131# Send SMS message # Siren adjustment volume Valid value is from 00 to 99 as largest, system default is the largest. Example: users need to set volume to Method one: #, and then press 1450#, press the * then press # Exit Setup # press 1450# Send SMS message # Forced disarm from Upon alarming, enforced to use only the panel keyboard to panel keyboard disarm (remote control is not allowed) for extra security. 1 is on and 0 is off, the system default is off Example: user needs to enforce to use keyboard /1 + # Method one: #, and then 151#, press the * then press # Exit Setup press 151# Send SMS message # Version 2.0 Page 21 of 38

22 Turn on or off This set the alarm panel to sound for 5 seocnds upon a kind Interference Alert of malicious attach from un-authorized remote control or transmitter of same frequency, meanwhile, the alarm panel 16 + will display tp warning. 0/1 + # Example: users need enable interference alert Method one: #, and then press 161#, press the * then press # Exit Setup press 161# Send SMS message # Keyboard password To enable the password protect of keyboard. System default protection feature password is 1234, defaultis set to off. Alarm panels will display "keyboard locked" when keyboard is locked 17 + Example: keyboard users need to set the password 0/1 + # protection. Method one: #, and then press 171#, press the * then press # Exit Setup press 171# Send SMS message # Set number of ring The system default is 8. 0 means the remote operation is not tones before allowed and disabled picking up Example: the user needs to set up a number of rings before picking up to Method one: # #, and then press 1806# Example: the user needs to set off the remote number ring. Method one: #, and then press 1800#, press the * then press # Exit Setup press 1800# Send SMS message # Version 2.0 Page 22 of 38

23 Set integarted Enable or disable the integrated alarm upon alarm. 1 is alarming enabled and 0 is disabled, the system default is 1. Example: users need to set the integrated alarming off, Method one: #, and then press 200#, press the * then press # Exit Setup /1 + # press 200# Send SMS message # Enable or disable Used to set the GSM Module on and off, 1 is on, 0 is off, the the GSM Module system default is on Example: the user needs to set GSM Module to off, so only 0/1 + # use landline for dialing. Method one: #, and then press 210#, press the * then press # Exit Setup press 210# Send SMS message # Restore setting factory System restore factory setting Method one: #, and then press 9898# # press9898# Send SMS message # Remark: This feature will restore all settings to factory default apart from the configuration of sensors and remote control. Total System Reset Disconnect power to the alarm panel, turned off the battery switch alarm panel, then press and hold the alarm panel of ARM button while power-on. The system will respond with Press and hold the short beep slowly for 5 seconds, then can release ARM ARM button on the button. The system is now totally reset. All configuration has keyboard and been cleared, all sensors and remote controlled are deleted power on. and password is restored to original Note: Other than the SMS commands for assigning specific phone number for certain zone, alarm panel will respond to all other SMS commands by replying confirmation of setting by SMS. Version 2.0 Page 23 of 38

24 4.2 Commands of System Enquiries Press Query button on panel to enter the query mode, alarm panel status LED is blinking. Then put in commands as detailed in table below, when finished, Press *, and then press #, to exit the query mode. Note: In case keyboard password protection is enabled, please enter tne password to unlock before other commands. Query for voice To query the alarm panel currently saved to the first set to alarm phone number the Nineth group voice alarm phone number. Press alarm panel query key of your keyboard, then # blinking status LED on the Panel, and then press 31#, the alarm panel LCD show means alarm panel's first set of alarm numbers are Query SMS message alarm phone number To query the alarm panel currently saved to the first set to the sixth group phone number on the alarm panel for SMS messages # Press alarm panel query key of your keyboard, then blinking status LED on and then press 41#, the alarm panel LCD show means the first set of SMS message is Query password Used to query the current password of the alarm panel, Press alarm panel query key of your keyboard, then blinking status LED on and then press 50#, the alarm panel 50 + # LCD show alarm panel your current password is Press # to clear the screen, press * then press # to exit the query mode. Query the delay arm time for Query delay time for arm (00-99) Seconds Press alarm panel query key of your keyboard, then blinking status LED on and then press 51#, the alarm panel 51 + # LCD show 00 mean time for delay is 0 second. Query delay time for alarming To query the alarm delay time (00-99) Seconds Press alarm panel query key of your keyboard, then blinking status LED on and then press press 52#, the alarm 52+ # panel LCD show 00 mean time for delay is 0 second. Query siren sounding time for alarming To query the siren sounding time (00-20) minutes when the alarming. Press alarm panel query key of your keyboard, then 53+ # blinking status LED on and then press press 53#, the alarm panel LCD show 01 mean time for delay is 1 minute. Version 2.0 Page 24 of 38

25 Query remote control For query of specific remote control and keyboard and keyboard assignments to zone assignments to zone Press alarm panel query key of your keyboard, then blinking status LED on and then press press 5401#, the alarm panel LCD show and remote control 1 means # remote control 1 is controlling zone 00-99, press # clear screen, using 5402# for query remote control 2 and so on. Query remote control audible confirmation For query the setting of remote control for the audible confirmation to command. Press alarm panel query key of your keyboard, then blinking status LED on and then press press 5501#, the # alarm panel LCD show ON means remote control 1 is set to sound upon receipt of command. Query the scheduled Used to query first to fourth set of scheduled time for arm time for arm and and disarm. disarm Press alarm panel query key of your keyboard, then blinking status LED on and then press press 5701# to query the first of scheduled arm and disarm, the alarm # panel LCD show Monday, Tuesday, means schedule set as Monday and Tuesday 22:00 pm arm and 07:00 am disarm. Query the zone For query the first to the fourth group scheduled arm and number with disarm. scheduled arm and Press alarm panel query key of your keyboard, then disarm blinking status LED on and then press press 5801# for zones with the first group of phone zone, the alarm panel LCD show means 0-99 zone are with 1 st phone # number group. Query type wireless For query the zone types of defense zone The alarm panel LCD show the name of type of zone, detail about zone types can be referred to another section of manual, the word ON or OFF next to the zone type # represents whether siren will sound upon alarming. Query the type of For query the zone type of wired zones Example: Press alarm panel query key of your keyboard, then blinking status LED on and then press press 6151# to query 51 zone alarm type, show NO means short-circuit to # alarm while show NC means open circult to alarm. Version 2.0 Page 25 of 38

26 Query remote To query if the remote operation is allowed, it should show operation on/off either ON or OFF. 62+ # Query phone number for specific zone To query the phone number assigned to zone for alert. Example: Press alarm panel query key of your keyboard, then blinking status LED on and then press 6301# for zone # 1, the alarm panel LCD show means these 6 group of phone numbers are assigned to 01 zone. Query for the setting For query whether the alarm will play audible confirmation of alarm audible upon receipt of commands. It shows either ON or OFF. confirmation 11+ # Query the setting of For query whether the anti-tampering of telephone line is anti-tampering of set, it shows either ON or OFF. telephone line 13+ # Query sound volume of siren 14+ # Query for the setting of enforced keyboard disarm 15+ # Query for the volume level of siren, it shows between representing the 00 as lowest and 99 as highest volume. To query whether enforcing the disarm from keyboard upon alarming. It shows either ON or OFF. Query of the setting To query whether interference alert is set, it shows either of interference alert ON or OFF. 16+ # Query keyboard To query if the password protection feature is enabled, it password protection shows either ON or OFF. 17+ # Version 2.0 Page 26 of 38

27 Query of number of To query the number of ringing before the panel will pick rings before panel up incoming calls from remote. pick-up incoming call Example: Press alarm panel query key of your keyboard, then blinking status LED on and then press press 18#, it 18+ # shows 08 means 8 rings, 11 means 11 rings and so forth. Query the setting of To query whether the integrated alarming of the alarm integrated alarming panel is set. It shows either ON or OFF. 20+ # Query if GSM Query if GSM Module is enabled or disabled, ON is Module is enabled enabled and OFF is disabled. 21+ # Query alarm panel The system can save up to the most recent 72 disarmed arm/disarm records records. Press alarm panel query key of your keyboard, then # blinking status LED on and then press press 9901#, press 8 to scroll up and 0 to scroll down for records. Other indications as: JP = arm/disarm from keyboard YC = arm/disarm from remote tp = interference alert 01 = remote control number 1 Query alarm panel The system can save up to the most recent 102 alarming alarming records records. Press alarm panel query key of your keyboard, then # blinking status LED on and then press press 9900#, press 8 to scroll up and 0 to scroll down for records. Example: Screen shows alarm, which means alarm happened on 1 st January 22:02pm at zone 2. Version 2.0 Page 27 of 38

28 4.3 SMS Commands The following instructions are only for SMS command to control panel remotely: Remote SMS disarm Send SMS message 12340# into alarm panel 0# Note: 1234 is the password Remote SMS Send SMS messages 12341# to set the alarm panel to ARM NORMAL arm 1# Remote SMS STAY Send SMS message 12342# to set alarm panel to STAY arm stay ARM. 2# Remote SMS turn on Send SMS message 12343# to turn on the relay of the relay alarm panel 3# Remote SMS off Send SMS messages 12344# to turn off the relay of the relay alarm panel 4# Query the alarm This command will return a list of general settings in one panel general settings SMS including: - status of arm/disarm - relay status - status of using AC/DC - status of integrated alarm - status of SMS messaging 11+ # - status of remote operation - password - delay alarming setting - delay arm setting - length of time of siren sounding - volume of siren - forced keyboard disarm - interference alert - keyboard locking status - audible confirmation Exmaple: text messaging # to the alarm panel Version 2.0 Page 28 of 38

29 Query anti-tampering Send SMS message # to the alarm panel, the alarm of phone cord and panel replies with a list of related setting: number of rings before pick-up 13+ # Query voice alarm Return a list of 1 st to 9 th phone number group for voice phone number alarm. Example: # to the alarm panel, the alarm panel replies " 1 Group phone number: means 1 # set of telephone number is Query phone number Query first to sixth group of phone number for SMS for SMS message message Example: # to the alarm panel, the alarm panel # replies "1st Group SMS number: means alarm the 1 st phone number for SMS message is Query assignment of Query the assignment of remote control to specific defense remote control to zone defense zone Example: # to the alarm panel, the alarm panel replies: 01, zone: means 01 remote control is # assigned to control zone Querying alarm panel Query alarm panel system time system time Example: # to the alarm panel, the alarm panel 56+ # replies Alarm clock : :00. Check the status of Query the four group of the scheduled arm and disarm scheduled arm/disarm Example: # to the alarm panel to check zone schedule, the alarm panel replies with a SMS message # containing the arm time, disarm time, day selected and zone affected. Check the type and Query the type and siren setting of certain wireless defense siren setting of zone wireless defense zone Example: Send message # to the alarm panel for asking zone 01, alarm panel reply to SMS message 01 # NORMAL zone, Siren ON. Version 2.0 Page 29 of 38

30 Check the settings of wired defense areas Query the alarm panel for settings of zone wired zone Example: send text message # to the alarm panel, # alarm panel reply SMS messages 51 NORMAL zone, Siren ON and NO. Query phone number Query the alarm panel the phone number assigned to zone assignment to zone Example: send message # to the alarm panel for # query zone 01, the alarm panel replies: " 01 Phone group number: means zone 1 will dial group Customize the SMS Used to customize the SMS message for zone message for certain Example: Send message Front Door Alarm# zone to the alarm panel will set alarm panel to send SMS message Front Door Alarm upon zone 01 alarm being "Panel with SMS triggered. message"+ # Note: Maximum length of message is 25 characters. Query the customized Query zone the content of SMS message SMS message content customized Example: # to the alarm panel to query for zone # 01 message content. Note: "1234" string shown above table all represents the password. User can change password and thus should adjust the commands listed accordingly. Remark: This machine can be used as a mobile for conversation. To do that, on the keyboard, put in # # where is the phone number you re going to connet. At the end of your call, press DISARM key, press *, then press # to exit. Version 2.0 Page 30 of 38

31 5 Remote Control of Panel This system is a dual-tech system that can use both PSTN landline and GSM mobile network for outgoing alert. The PSTN landline is the preferred mode of calling, GSM network will then be used until all six groups of phone number cannot be connected using PSTN landline. 5.1 After receiving the Panel Alert: After Panel alerts, it will automatically dial the preset telephone number for three times until connected. When the user picks up the phone, a piece of pre-recorded voice message will be played back immediately and let the receiver noted about the event. Upon receiving the call, it can also control the alarm panel remotely via the phone (according to the command below). User will not be asked for password upon connected and alarm will automatically hang up call within receiving any instruction within 20 seconds. [1] key: arming [2] key: disarming [3] key: monitoring open [4] key: monitoring closed [5] key: turn on announcement [6] key: turn off announcement [7] key: siren ringing [8] key: stop siren sound [9] key: turn on relay [0] key: turn off relay [*] key: hang up, system will not dial the next number on list. Remark: - If not hang up using [*] key or disarm using [2] key, the system will retry to call the next phone numbers on list until one connected. - Panel will not ask for password when dialing out upon alarming. 5.2 Remote Dialing In Operation: Remote-control operations can be done via any phone. You can just dial into the alarm panel and user will be asked for password upon connected and alarm will automatically hang up call within receiving any instruction within 20 seconds or password is incorrect. [1] key: arming [3] key: monitoring open [5] key: turn on announcement [7] key: siren ringing [9] key: turn on relay [2] key: disarming [4] key: monitoring closed [6] key: turn off announcement [8] key: stop siren sound [0] key: turn off relay Version 2.0 Page 31 of 38

32 [*] key: hang up, system will not dial the next number on list. Remark: - If not hang up using [*] key or disarm using [2] key, the system will retry to call the next phone numbers on list until one connected. - Panel will not ask for password when dialing out upon alarming. Version 2.0 Page 32 of 38

33 6 Types of Alarm Zone 6.1 Definitions of Zones The alarm supports 99 distinguishable defense zones and they can be classified into one of the 8 Zone Types with their respective characteristics. Type Zone Type Interpretation ID 1 NORMAL Defense the Panel only works on the arming status. When Zone disarming, there is no response. 2 STAY Defense zone can be shut off solely through the remote control (AT-HOME Defense (keyfob) to avoid the Infrared Detectors and other zone) in-room detectors from misinformation when master is resting at home. 3 INTELLIGENT if the detector in the Defense zone is triggered only Defense zone: once, it will not immediately alarm. But if being triggered once again within 30 seconds after the first triggering, it will not alarm immediately. 4 EMERGENCY no matter on arming or disarming status, if detector is Defense zone: triggered it will alert. Usually used in connecting with Smoke Detectors, Gas Detectors and emergency button, etc. 5 CLOSED Defense no matter arming or disarming status, detectors will not zone: alert even being triggered. 6 CHIME Zone No matter in what status, when sensor with this zone is triggered, a welcome door bell will be ring as notification. 7 WELCOME Zone No matter in what status, when sensor with this zone is triggered, a welcome voice message will be played. 8 HELP SENIOR This type of zone is for elderly safety, no matter in Defense Zone what status, the panel will alarm once sensor with this zone type is triggered. Version 2.0 Page 33 of 38

34 6.2 System default zone types are: Normal Stay Intelligent Help Chime Welcome Emergency Senior Other System Default Operation password 1234 Remote Control Enable Telephone Line Anti-tampering Disable Siren Sound 1 minute Delay ARM No wired zones Normal Open SMS Message Enable Integrated Alarming Enable Number of rings before picking 8 rings up Audible confirmation for remote Enable operation Delay alarming Disable 1-99 Zone alarm Siren sound enable 1-99 Zone SMS message content Zone alarm 6.4 Fitting parameters: - Input voltage: DC9V-12V - Standby currents: < 25mA - Alarm current: < 450 ma Wireless frequency: 433MHZ, 2262/ M, EV1527/300K - GSM Format: Support GSM850/900/1800/1900MHz Backup battery: NI-HI AAA*6 DC7.24V Alarm loudness: 110dB - Detailed parameters: The alarm should be compatible with PT2262, PT2240 and EV1527. Using PT2262 encoding, the resistance is recommended 1.5M-4.7M; using with EV1527 encoding, the resistance by 300K, data recommended Version 2.0 Page 34 of 38

35 7 Guideline of Installation Sensors 7. 1 Guideline for Installing Door or Window Sensor 1. The surface for door sensor installation should be clean so door sensor can be attached to the door and frame firmly with double faced adhesive. 2. Each door sensor is a pair of sensor and magnet. The sensor (A as in diagram) should be installed on the fixed door frame and the magnet (B as in diagram) should be placed on the movable door with a distance not exceeding 1 cm. 3. Upon installed, door sensor should be tested by open the door and check if the indicator on door sensor flashes for 1 second. 4. In case the door sensor is running out of battery, the indicator should be kept lit as a low-voltage notification. 7.2 Guideline for Installing PIR Motion Sensor 1. Before use, make sure the power switch of PIR motion sensors is at the ON position. 2. Installation height is about 2.2 meters above ground and the optimized detection angle for most motion sensor is 90 degree. The sensor should face the detected area with this consideration for best coverage. It is advised to install with the face of motion sensor perpendicular to the most probable moving detection of people for the highest effective detection. Version 2.0 Page 35 of 38

36 3. Within coverage of detection, there should be no any objects for obstruction. 4. There should be no two infrared detectors in the same as they will possibly intervene with each other. 5. Avoid the detector facing window, cooling or warming machines, or other appliances that cause the temperature changing sharply and thus cause false alarm. 6. Most infra-red detector needs about 5 minutes to heat up before READY for normal operation. 7. Regular PIR motion sensor is for indoor use unless the specification stated otherwise. Unless specifies otherwise, most infra-red detector are indoor use and not reliable to use outdoor. Version 2.0 Page 36 of 38

37 8 Troubleshooting Problem Diagnosis Available Solutions 1. cannot dial for not armed set system armed alarm phone for notification not re-set according to the configured specification parts improperly installed coordinating the location e.g. sensors installed too far of parts away re-coding code not match 2. cannot password input wrongly retry password or reset long-distance ( or forgotten ) password operation 3. no record voice message not recorded record voice message indication when alerting 4. remote control coding un-matched with the re-learn the remote control (keyfob) not Panel change battery to correct working insufficient battery power type or battery contact no good polish the surface of battery pieces poor contact contact of battery or voltage un-matched with contact the local dealer to Panel change the matched remote control (keyfob) 5. infrared detector low power change to the same type out of order battery 6. siren without siren plug or jack in short repair or change plug or sound circuit or broken-line jack siren out of order change the jack line closed siren by command activate siren by command positive and ground wires use another siren to double of siren reversed check reverse the wires to try adjust a longer length of siren sounding Version 2.0 Page 37 of 38

38 Problem Diagnosis Available Solutions 7. the transmission a nearby emitter is creating identify and remove the distance of detector interference signal source of interference to panel shorten Panel receiver out of order move one detector next to standby battery of the Panel panel and try insufficient retrun to factory for detail check check Panel power whether plugged well 8. Alarm triggered Phone cord is not Either disable the phone continuously right connected but the phone alert function or connect after power up alert function is enabled the phone cord 9. Panel without The function is disabled Enable on the panel audible receipt confirmation 10. SIM card not SIM card not install Replace SIM card found, GSM not correctly. Cancel the password of dialing out or no SIM requires a password to SIM SMS sent dial Change place of alarm GSM signal not good panel to test signal SIM card contact points not Change other SIM card for good double check Voice calling disabled Make sure voice calling SMS message disabled and SMS messaging are SIM card is a pre-paid type enabled of card and no enough Re-fill the SIM card deposit deposit The SMS function not Enable the SMS function enabled 11. Keypad button Keyboard protection is Try disable the keyboard no response enabled protection see if it works Version 2.0 Page 38 of 38

To activate using remote control: press [ ] key once. To activate using keyboard: on panel keyboard [ ] keys once.

To activate using remote control: press [ ] key once. To activate using keyboard: on panel keyboard [ ] keys once. Table of Content 1.1General Description----------------------------------------------------------------------2 2.2System Setup-----------------------------------------------------------------------------3

More information

1 0 2 zo z n o e n s e In I t n e t l e l l i l g i e g n e t n GS G M a a l r a m s s y t s e t m u e s r e gu g i u d i e

1 0 2 zo z n o e n s e In I t n e t l e l l i l g i e g n e t n GS G M a a l r a m s s y t s e t m u e s r e gu g i u d i e 120 zones Intelligent GSM alarm system user guide 120 zones Intelligent GSM alarm system 1. Introduction 1.1 General Description This GSM system with 120wireless zones and digital clock display, is suitable

More information

MOBILE CALL GSM Alarm System User s Manual

MOBILE CALL GSM Alarm System User s Manual MOBILE CALL GSM Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents Function Introduction (3) Alarm Host Diagram

More information

Wireless Alarm system s manual

Wireless Alarm system s manual MOUNTVIEW TECH AUSTRALIA PTY LTD Wireless Alarm system s manual ADS ECO GSM320 Series ADS Security 1/11/2011 1. Before You Begin For your safety and the safety of others, and to ensure that you get the

More information

Profile. For a better understanding of this product, please read this user manual thoroughly before using it.

Profile. For a better understanding of this product, please read this user manual thoroughly before using it. Intelligent GSM Auto-Dial Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents Function Introduction (3) Alarm

More information

GSM RFID VOICE Alarm System

GSM RFID VOICE Alarm System GSM RFID VOICE Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS [Function Instruction] [Control Panel] Control Panel

More information

GSM Alarm System. User s Manual. Profile. MOBILE CALL GSM Alarm System

GSM Alarm System. User s Manual. Profile. MOBILE CALL GSM Alarm System MOBILE CALL GSM Alarm System GSM Alarm System System disarmed 11/26/2013 User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS

More information

System. For a better understanding of this product, please read this user manual thoroughly before using it.

System. For a better understanding of this product, please read this user manual thoroughly before using it. GSM Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. Chapter 1. Features Chapter 2. Control Panel Introduction Chapter 3.

More information

GSM Smart Home Alarm Apparatus. [99+4 defense zones] Instruction for Use

GSM Smart Home Alarm Apparatus. [99+4 defense zones] Instruction for Use GSM Smart Home Alarm Apparatus [99+4 defense zones] Instruction for Use Table of content Ⅰ. Introduction to the system... 2 Ⅱ. Introduction to function... 2 Ⅲ. System composition and use method... 3 Ⅳ.

More information

Intelligent Wireless GSM Alarm System

Intelligent Wireless GSM Alarm System Intelligent Wireless GSM Alarm System 00M2K User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents [Function Instruction] [Alarm

More information

Security GSM Alarm System

Security GSM Alarm System Security GSM Alarm System USER MANUAL 4 wired and 6 wireless defense zones; Can preset and store 6 voice phones and 3 message phones; Remote two-way intercom; Telephone (mobile phone) remote control programming;

More information

USER S MANUAL. Profile. MOBILE CALL GSM Alarm System

USER S MANUAL. Profile. MOBILE CALL GSM Alarm System MOBILE CALL GSM Alarm System USER S MANUAL System disarmed 00/00/00 00:00 ARM STAY CALL 1 2 3 4 5 6 7 8 9 Power Set Signal Alarm SOS ESC 0 ENTER Profile For a better understanding of this product, please

More information

Preface. Thank you for purchasing our GSM Security Alarm System ( The System )! The System will keep your home and property safe around the clock.

Preface. Thank you for purchasing our GSM Security Alarm System ( The System )! The System will keep your home and property safe around the clock. Preface Thank you for purchasing our GSM Security Alarm System ( The System )! The System will keep your home and property safe around the clock. The GSM Security Alarm ( The Alarm ) adopts the most advanced

More information

User Manual (LS-GSM-006)

User Manual (LS-GSM-006) GSM Home/Business Alarm System User Manual (LS-GSM-006) Profile For a better understanding of this product, please read this user manual thoroughly before using it. - 1 - Catalogue: Function Introduction

More information

V1.0. Smart Home Alarm System. User Manual. APP download via QR Code scanning. Please read the manual carefully before using.

V1.0. Smart Home Alarm System. User Manual. APP download via QR Code scanning. Please read the manual carefully before using. V1.0 Smart Home Alarm System User Manual APP download via QR Code scanning Please read the manual carefully before using. Content FUNCTION PROFILE 2 THE SCHEMATIC GRAPH OF HOST 3 PROCESS OF BOOTING 6 OPERATION

More information

GSM Emergency Alarm. User s Manual. For a better understanding of this porduct,please read this user manual thoroughly before using it.

GSM Emergency Alarm. User s Manual. For a better understanding of this porduct,please read this user manual thoroughly before using it. Version: MS1 GSM Emergency Alarm User s Manual For a better understanding of this porduct,please read this user manual thoroughly before using it. CONTENTS CONTENTS Ⅰ. Introduction Ⅱ. Product Appearance

More information

Wolf Guard Touch Keypad GSM Wireless alarm system User s Manual

Wolf Guard Touch Keypad GSM Wireless alarm system User s Manual Wolf Guard Touch Keypad GSM Wireless alarm system User s Manual Page 1 Warning Do not remove the front or back cover of the unit and keep it intact. There are no parts inside this unit that can be repaired

More information

Quick Installation Manual LED Touch Keypad Autodial Wireless Alarm System

Quick Installation Manual LED Touch Keypad Autodial Wireless Alarm System Quick Installation Manual LED Touch Keypad Autodial Wireless Alarm System By shield4u http:// (Version 20110816) A. Alarm Understanding Away Disarm Home Emergency Function Signal Interpretation Buzzer

More information

Contents. Contents

Contents. Contents Contents Contents-----------------------------------------------------3 Preface-------------------------------------------------------------------4 Function Introduction-------------------------------------------------5

More information

D3D Wi-Fi GSM Smart Alarm System -User Manual

D3D Wi-Fi GSM Smart Alarm System -User Manual D3D Wi-Fi GSM Smart Alarm System -User Manual D3D Wi-Fi / GSM Smart Alarm system (Model : D10). Please read all instructions carefully & follow steps for easy home installation. 1 P a g e D3D Wi-Fi / GSM

More information

WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER

WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER BAT.LOW AC WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER THE SYSTEM THAT CALLS YOU! Our WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER is designed to allow you to create your own security system.

More information

S3 Sim Secual Alarm system with GSM transmitter

S3 Sim Secual Alarm system with GSM transmitter S3 Sim Secual Alarm system with GSM transmitter www.etiger.com Features Control Panel Layout (Back) - ARM CPU + Auror CPU - GSM frequency: 850 / 900 / 1800 / 1900 MHz, suits all phones - Supports up to

More information

13. The wireless coding and timing arm and disarm settings Function Setting First / second group of time arm set 1.

13. The wireless coding and timing arm and disarm settings Function Setting First / second group of time arm set 1. Contents 10.4 Arm and disarm the Upload Settings Preface 11. Alarm type set Function Instruction 12. Zone type setting About the host 13. The wireless coding and timing arm and disarm settings Function

More information

SMART HOME SECURITY. Dual Network Communicating Alarm System with RFID INVINCIBLE. Instruction Manual. Customer Helpline

SMART HOME SECURITY. Dual Network Communicating Alarm System with RFID INVINCIBLE. Instruction Manual. Customer Helpline SMART HOME SECURITY Dual Network Communicating Alarm System with RFID INVINCIBLE Instruction Manual Customer Helpline 045 57 500 Table of Contents Kit Contents ---------------------------------------------------------------------

More information

With Magictrl, you can control MatiGard anytime & anywhere via your smartphone, even without data network.

With Magictrl, you can control MatiGard anytime & anywhere via your smartphone, even without data network. MatiGard User Guide 02 Menu Feature-------------------------------------------------------------- 05 Overviews---------------------------------------------------------- 07 Read Before Using-----------------------------------------------

More information

1. Introduction. 2. Product overview

1. Introduction. 2. Product overview 1. Introduction The AG400011 GSM Alarm panel is a control panel that is compatible with other H-net security devices from Everspring, such as wireless sensors, remote keyfobs, tags, and keypad. With this

More information

PiSector GSM Cellular Wireless Alarm System

PiSector GSM Cellular Wireless Alarm System PiSector GSM Cellular Wireless Alarm System User Manual ( GS08 ) Read manual fully before use. PiSector Inc., USA, www.pisector.com Welcome to PiSECTOR Thank you for choosing PiSECTOR. Everyone at PiSECTOR

More information

SK642 THE TELEPHONE DIALER REQUIRES A LAND TELEPHONE LINE TO MAKE OUTGOING CALLS AND ELECTRICITY.

SK642 THE TELEPHONE DIALER REQUIRES A LAND TELEPHONE LINE TO MAKE OUTGOING CALLS AND ELECTRICITY. SK642 WIRELESS WATER ALARM SYSTEM WITH AUTO DIALER OWNER'S MANUAL AND SET UP INSTRUCTIONS. Thank you for choosing Ideal Security s Wireless Water Alarm with Telephone Dialer. Please read through complete

More information

GSM LCD Touch Keypad Wireless Intelligent Alarm System. User s manual

GSM LCD Touch Keypad Wireless Intelligent Alarm System. User s manual GSM LCD Touch Keypad Wireless Intelligent Alarm System User s manual I. Foreword Thank you for purchasing and using GSM LCD touch keypad wireless intelligent home alarm system. This is a high-performance

More information

It is necessary to match all peripherals with the EVOLVEO Alarmex main unit before the first use. For safety reasons, they are not factory paired.

It is necessary to match all peripherals with the EVOLVEO Alarmex main unit before the first use. For safety reasons, they are not factory paired. Thank you for purchasing the GSM alarm system EVOLVEO Alarmex. Please, read this user manual carefully and follow strictly the set instructions. This product uses the most modern technology, yet you cannot

More information

DIY kit alarm system. Model LYD 118 New Launch Touch Screen GSM Alarm System

DIY kit alarm system. Model LYD 118 New Launch Touch Screen GSM Alarm System DIY kit alarm system Model LYD 118 New Launch Touch Screen GSM Alarm System Shenzhen Lydian Technology Co.,LTD TEL:0086 755 81466695 Fax:0086 755 29590510 MP:18576679181 QQ:745927820 Skype: lydian.angela

More information

GSM PROTECT ANTI-THEFT ALARM WITH GPS TRACKING & MOBILE PHONE ALERTS

GSM PROTECT ANTI-THEFT ALARM WITH GPS TRACKING & MOBILE PHONE ALERTS GSM PROTECT ANTI-THEFT ALARM WITH GPS TRACKING & MOBILE PHONE ALERTS Remote monitoring & Control using your mobile phone. www.gsm-activate.co.uk MODEL NUMBER VAN001 PAGE 1 Product Information The GSM Protect

More information

Thank you for choosing Ideal Security s Home Security System with Telephone Dialer.

Thank you for choosing Ideal Security s Home Security System with Telephone Dialer. SK618 WIRELESS ALARM SYSTEM WITH AUTO DIALER OWNER'S MANUAL Thank you for choosing Ideal Security s Home Security System with Telephone Dialer. If at any time during your installation you have any questions

More information

TYDOM 315. * _Rev.2* GSM domotics transmitter. 1. Presentation

TYDOM 315. * _Rev.2* GSM domotics transmitter. 1. Presentation TYDOM 5 GSM domotics transmitter ) Présentation. Presentation Delta Dore hereby declares that the equipment complies with the essential requirements and other relevant provisions of the R&TTE Directive

More information

BURGLAR ALARM PANEL BS-468

BURGLAR ALARM PANEL BS-468 BURGLAR ALARM PANEL BS-468 Contents 1. Description... 3 2. Instructions for the user... 4 2.1Basic operations... 4 Complete system.... 4 Split system.... 4 2.2 Armed system indication... 5 2.3 Advanced

More information

Contents. Glossary

Contents. Glossary Contents Glossary ------------------------------------------------------------------------------------------------------ 6 1. Introduction to the IDS 1632 -------------------------------------------------------------

More information

Thank you for choosing Ideal Security s Home Security System with Telephone Dialer.

Thank you for choosing Ideal Security s Home Security System with Telephone Dialer. SK618 WIRELESS ALARM SYSTEM WITH AUTO DIALER OWNER'S MANUAL Thank you for choosing Ideal Security s Home Security System with Telephone Dialer. If at any time during your installation you have any questions

More information

Voice GSM Alarm System User Manual

Voice GSM Alarm System User Manual TM M1 Voice GSM Alarm System User Manual Please read before any operation Shenzhen ERAYELECTRONIC CO.LTD Address: 5th F,2 Building, An'le industrial Park, XingHua RD, Bao'an zone43,shenzhen,china ERAY

More information

2G & 3G GSM Portable PIR Alarm

2G & 3G GSM Portable PIR Alarm 2G & 3G GSM Portable PIR Alarm www.gsm-activate.co.uk MODEL RF - PORTABLE-PIR PAGE 1 Product Information Our 2G/3G Portable PIR Alarm is a standalone alarm system suitable for indoors or outside usage.

More information

Elderly Care Alarm System

Elderly Care Alarm System Introduction 24/7 Peace of mind for your family The GSM Elderly Care Alarm System is a new released smart solution for take care of senior, aged, elder or disabled people on their daily life. Big LED display

More information

2G & 3G GSM Door Contact Alarm

2G & 3G GSM Door Contact Alarm 2G & 3G GSM Door Contact Alarm www.gsm-activate.co.uk MODEL RF - PIR PAGE 1 Product Information Our 2G/3G GSM Door Contact Alarm is a standalone alarm system for smaller rooms inside properties. It will

More information

Shenzhen Secrui Electronic Co., Ltd

Shenzhen Secrui Electronic Co., Ltd Shenzhen Secrui Electronic Co., Ltd Add: Secrui Building, DingFeng Industry, YongHe Road, FuYong Street, BaoAn District, Shenzhen City, China Tel: 86-0755-29927635 Fax: 86-0755-81454296 Mobile: 86-15211462314

More information

CONTENTS. (User s Manual)

CONTENTS. (User s Manual) CONTENTS (User s Manual) 1. Foreword & Main Features & Brief introduction of the Product 2. Understanding of Alarm Host 3. Specifications 4. Type and definition of Defense Line 5. Programming the alarm

More information

Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone!

Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone! Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone! GSM SMS Controller DCS-130 User Manual Ver 1.20 Date Issued: 14-9-2010

More information

Using Your. Security System With LED Keypad S5030, S5031, S5032

Using Your. Security System With LED Keypad S5030, S5031, S5032 Using Your Security System With LED Keypad S5030, S5031, S5032 Contents 1 Overview Your Security System... 1 How Your Security System Works... 2 Your System's Programming... 3 Getting Used to Your System...

More information

status AW1 WiFi Alarm System Printed in China PA : AW1-UM-EN-V1.0 User Manual 2016 Chuango. All Rights Reserved.

status AW1 WiFi Alarm System Printed in China PA : AW1-UM-EN-V1.0 User Manual 2016 Chuango. All Rights Reserved. status 2016 Chuango. All Rights Reserved. Printed in China PA : AW1-UM-EN-V1.0 AW1 WiFi Alarm System User Manual Foreword Contents Congratulations on your purchase of the AW1 Alarm system. Before you commence

More information

Quick Installation Manual LED 99-Zone Autodial Wireless Alarm System

Quick Installation Manual LED 99-Zone Autodial Wireless Alarm System Quick Installation Manual LED 99-Zone Autodial Wireless Alarm System By shield4u http:// (Version 20130211) A. Alarm Understanding Wireless Antenna Display Keypad Indicator Function Keys Switch for Backup

More information

AG HOME ALARM Quick Start Guide

AG HOME ALARM Quick Start Guide AG400011 HOME ALARM Quick Start Guide Step 1 Power on and SIM Card Installation 1. Remove battery cover of the alarm panel. 2. Insert a SIM card into the slot and connect the Li-ion cell 2000mAh 3.7V and

More information

ALC-PACK3. WiFi Alarm System with HD WiFi Camera. User Manual. Your Watchguard Wireless Security professional:

ALC-PACK3. WiFi Alarm System with HD WiFi Camera. User Manual. Your Watchguard Wireless Security professional: status ALC-PACK3 WiFi Alarm System with HD WiFi Camera User Manual Your Watchguard Wireless Security professional: www.activeonline.com.au 1300 816 742 Foreword Congratulations on your purchase of the

More information

status AW1 Plus WiFi Alarm System User Manual

status AW1 Plus WiFi Alarm System User Manual status AW1 Plus WiFi Alarm System User Manual Foreword Congratulations on your purchase of the AW1 Plus Alarm system. Before you commence installation we recommend that you unpack the product, familiarise

More information

www.eraeverywhere.com ERA Home Security Straight Road, Short Heath, Willenhall, West Midlands, WV12 5RA email: alarms @ eraeverywhere.com Customer Helpline: 0345 257 2500 Vault_V1.0_3616 IMPORTANT Table

More information

1. Functions of GPS locator ETLOC-30S 3

1. Functions of GPS locator ETLOC-30S 3 Contents 1. Functions of GPS locator ETLOC-30S 3 1.1 Direct view of the vehicle position on the map 3 1.2 Vehicle security 3 1.2.1 Vehicle protection 3 1.2.1.1 GPS protection 3 1.2.1.2 GPS higher level

More information

S4 Combo Secual / S4 Combo Vid Secual GSM and Landline Alarm System

S4 Combo Secual / S4 Combo Vid Secual GSM and Landline Alarm System S4 Combo Secual / S4 Combo Vid Secual GSM and Landline Alarm System www.etiger.com EN Features - GSM/PSTN transmitter - Supports up to 30 remote controls, 50 wireless accessories and 50 RFID tags - Can

More information

Touch Keypad GSM Smart Alarm System USER MANUAL

Touch Keypad GSM Smart Alarm System USER MANUAL Touch Keypad GSM Smart Alarm System USER MANUAL I. Foreword Thank you for purchasing and using GSM LCD touch screen wireless home alarm system. This is a Hi-tech household security product. It will make

More information

JA-63 Profi User manual

JA-63 Profi User manual JA-63 Profi User manual Contents: 1 Limited warranty... 2 2 Indicators... 3 3 Controlling the system... 4 3.1 Arming... 5 3.2 Disarming... 6 3.3 Panic Alarm... 6 3.4 To stop ALARM... 6 3.5 Home arming...

More information

0 4 / 0 4 / 1 4. GE Concord 4 Quick User Guide. GE Concord 4 Quick User Guide Page 1

0 4 / 0 4 / 1 4. GE Concord 4 Quick User Guide. GE Concord 4 Quick User Guide Page 1 0 4 / 0 4 / 1 4 GE Concord 4 Quick User Guide GE Concord 4 Quick User Guide Page 1 Before Calling Is the keypad beeping? Press *. This will silence the beeping and let you know where the trouble is. Is

More information

Auto Dialer. Manual E-921APQ E-921GPQ

Auto Dialer. Manual E-921APQ E-921GPQ Troubleshooting: Auto dialer will not arm/disarm Auto dialer will not dial out Unit doesn t respond to a call-back Difficulty in activating room monitor by telephone remote control Make sure that you have

More information

WiFi GSM APP Smart Home Security System

WiFi GSM APP Smart Home Security System User Manual WiFi GSM APP Smart Home Security System Tips: Please read through this user manual before installation so as to operate properly. Please keep well of the user manual for further reference.

More information

1. User features of the GSM dialer

1. User features of the GSM dialer 1. User features of the GSM dialer The JA60GSM dialer offers many useful features described in detail below. The installer should properly demonstrate the use of the system to the user after installation

More information

Destiny Destiny Owners Manual

Destiny Destiny Owners Manual Destiny 4100 Destiny 4100 Owners Manual TABLE OF CONTENTS INTRODUCTION Control Panel...3 Detection Devices...3 Telephone Keypads...3 GLOSSARY... 4-5 LOCAL PHONE ACCESS Using Your Telephones As Keypads...6

More information

INSTALLATION AND USER MANUAL SG2. GSM+WiFi. Alarm Security System

INSTALLATION AND USER MANUAL SG2. GSM+WiFi. Alarm Security System INSTALLATION AND USER MANUAL GSM+WiFi Alarm Security System SG2 SIM Features - 16-bit high speed processor, reliable capability - 100% wireless D.I.Y. - Built-in 1,000,000 RF codes - Supports 10 remote

More information

2G & 3G GSM Wireless Beam Alarm

2G & 3G GSM Wireless Beam Alarm 2G & 3G GSM Wireless Beam Alarm www.gsm-activate.co.uk MODEL RF - BEAM PAGE 1 Product Information Our 2G/3G GSM Wireless Beam Alarm is a standalone alarm system suitable for indoor and outside use. It

More information

DYGIZONE GJD910 Lighting Controller & Enunciator

DYGIZONE GJD910 Lighting Controller & Enunciator DYGIZONE GJD910 Lighting Controller & Enunciator MASTER WIRING IDENTIFICATION Power up to the DygiZone and you will see: All the LED s (red,yellow,green and blue buttons) will flash All the LCD icons will

More information

A1UL PERS. Personal Emergency Response System. For Technical Support Please Contact Your Service Provider Or Distributor

A1UL PERS. Personal Emergency Response System. For Technical Support Please Contact Your Service Provider Or Distributor A1UL PERS Personal Emergency Response System TABLE OF CONTENTS 1. READ THIS FIRST... 1 2. SYSTEM OVERVIEW.. 1 3. COMPONENTS 2 4. UNIT OPERATION! Standby Mode.. 3! Emergency Activation. 3! Answering Incoming

More information

AXI LED USER MANUAL (REV. 1.0)

AXI LED USER MANUAL (REV. 1.0) Security & Home Automation System AXI LED USER MANUAL (REV. 1.0) CONTENTS PREFACE FEATURES LED KEYPAD OUTLOOK 1.0 LIGHT INDICATION 1 2 4 6 CHAPTER 1: ALARM SYSTEM CONTROL 1.0 USING LED KEYPAD 1.0.1 ARMING

More information

S6 Titan Security System. Wi-Fi and 3G GSM

S6 Titan Security System. Wi-Fi and 3G GSM S6 Titan Security System Wi-Fi and 3G GSM Version 1 - Apr 2018 Table of Contents Introduction 1 Self Monitoring 1 GSM SIM Card and Land Line 1 Free Mobile App (iphone / Android) 1 Pre-Programmed Accessories

More information

Version 1.03 January-2002 USER S MANUAL

Version 1.03 January-2002 USER S MANUAL Version 1.03 January-2002 1 USER S MANUAL 2 Version 1.03 January-2002 System Details CUSTOMER:...... PHONE:... FAX:... INSTALLED BY:...... PHONE:... FAX:... MAINTENANCE & SERVICE:...... PHONE:... FAX:...

More information

Advisor Advanced User Guide

Advisor Advanced User Guide Advisor Advanced User Guide P/N 1068996 (EN) REV G ISS 28AUG15 Copyright Trademarks and patents Manufacturer Version Certification 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved.

More information

Wireless Keypad GKP-S8M

Wireless Keypad GKP-S8M Wireless Keypad GKP-S8M User manual Contents Congratulations on your purchase of this Honeywell wireless keypad. To make the best out of your equipment we advise you to read this manual carefully. This

More information

EM8710 GSM Alarm System Starter Kit

EM8710 GSM Alarm System Starter Kit EM8710 GSM Alarm System Starter Kit EM8710 - GSM Alarm System Starter Kit 2 ENGLISH Table of contents 1.0 Introduction... 3 1.1 Packing contents... 4 2.0 Explanation of the Alarm system... 5 2.1 Front...

More information

Premier External TD. Installation Manual INS352-3

Premier External TD. Installation Manual INS352-3 Premier External TD Installation Manual INS352-3 1. Accessing the Unit 1 2 Remove the top cap and loosen screw (screw retained in wall plate). Push up head unit and remove. 3 Use a flat head screwdriver

More information

GSM-SMS-APP Smart Touch Alarm System

GSM-SMS-APP Smart Touch Alarm System SECURE YOUR HOME User Guide Ver.1810 GSM-SMS-APP Smart Touch Alarm System Dear users, Thanks for selecting the touch alarm system. Please read through this guide before installation so as to operate properly.

More information

Wireless Keypads LKP(E)S8M Series

Wireless Keypads LKP(E)S8M Series Wireless Keypads LKP(E)S8M Series User manual Contents Congratulations on your purchase of this Honeywell wireless keypad. To make the best out of your equipment we advise you to read this manual carefully.

More information

USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG100+ CONTENTS

USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG100+ CONTENTS CONTENTS USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG00 Section Getting started. General system overview. Introduction to the system. Items included with the system. Introduction to the Smart Panel.5

More information

GSM Alarm System. S120 User Manual. Ver 1.00 Date Issued:

GSM Alarm System. S120 User Manual. Ver 1.00 Date Issued: GSM Alarm System S120 User Manual Ver 1.00 Date Issued: 2010-09-01 Website: Http://www.thebest-plus.com Table of Contents 1. Brief introduction -----------------------------------2 2. Safety Directions

More information

INSTRUCTION MANUAL FOR: WIRELESS SECURITY STARTER KIT MODEL NO: SWSKIT

INSTRUCTION MANUAL FOR: WIRELESS SECURITY STARTER KIT MODEL NO: SWSKIT INSTRUCTION MANUAL FOR: WIRELESS SECURITY STARTER KIT MODEL NO: SWSKIT B. Operation i. Powering up the Key Fob Remote Control ii. Enrolling the Remote Control onto the Smart Panel iii. Operating the Key

More information

GSM House Alarm System. User Manual. Ver 1.20 Date Issued:

GSM House Alarm System. User Manual. Ver 1.20 Date Issued: GSM House Alarm System User Manual Ver 1.20 Date Issued: 2010-05-14 Table of Contents 1. Brief introduction -----------------------------------2 2. Safety Directions -----------------------------------2

More information

GSM SMS Controller GSM SMS Alarm Unit S130 S140 S150. User Manual

GSM SMS Controller GSM SMS Alarm Unit S130 S140 S150. User Manual Remote switching machines with a SMS text from your mobile phone! Remote Monitoring your assets in the worldwide by your mobile Phone! GSM SMS Controller GSM SMS Alarm Unit S130 S140 S150 User Manual Ver

More information

BURGLAR ALARM PANEL BS-468/A

BURGLAR ALARM PANEL BS-468/A BURGLAR ALARM PANEL BS-468/A Contents 1. Description... 4 2. User instructions... 5 2.1. Basic operations... 5 Complete System... 5 Split System... 5 2.2. Armed system indication... 6 2.3. Advanced operations...

More information

The complete wirefree security alarm solution

The complete wirefree security alarm solution The complete wirefree security alarm solution www.espuk.com Wirefree home security and management system Infinite prime offers the professional installer a comprehensive and reliable intruder alarm solution

More information

S3b Sim Secual / S3b Sim Vid Secual GSM Alarm System

S3b Sim Secual / S3b Sim Vid Secual GSM Alarm System S3b Sim Secual / S3b Sim Vid Secual GSM Alarm System www.etiger.com EN Features - GSM frequency: 850 / 900 / 1800 / 1900 MHz - Supports up to 10 remote controls, 50 wireless accessories and 50 RFID tags

More information

ALARM SYSTEM USER S MANUAL Rev

ALARM SYSTEM USER S MANUAL Rev ALARM SYSTEM USER S MANUAL Rev.06 890-00011 Manufacturer: Viatron Electronics 3514 1st Street, St-Hubert (Quebec) Canada J3Y 8Y5 WARNINGS the warranty can be void if the Agri-Alert 2400 is used in a manner

More information

Congratulations! This manual consists of four sections: SECTION 1 introduces you to the components of your CareTaker system.

Congratulations! This manual consists of four sections: SECTION 1 introduces you to the components of your CareTaker system. Congratulations! Your purchase of the CareTaker security system is a decision which will afford you greater peace of mind for the many years of service the system is designed to provide. The CareTaker

More information

reading carefully this guide, operating this system strictly on the standard procedure.

reading carefully this guide, operating this system strictly on the standard procedure. SYSTEM-ZDAS-16CA-8 PROGRAMMING GUIDE Thanks for choosing ZDAS-16CA-8 Multi-Function Alarm Control Panel. We suggest you reading carefully this guide, operating this system strictly on the standard procedure.

More information

USER MANUAL QSDL503AD Intelligent Auto-Dial Alarm System

USER MANUAL QSDL503AD Intelligent Auto-Dial Alarm System USER MANUAL QSDL503AD Intelligent Auto-Dial Alarm System Rev 10.28.2009 TABLE OF CONTENTS Section 1: USAGE... 1 Section 2: FEATURES... 1 Section 3: PACKAGE CONTENTS... 1 Section 4: SYSTEM INSTALLATION...

More information

GSM AUTO DIALLER WIRELESS ALARM SYSTEM MODEL AD-SD MODEL AD-SD-W www.gsm-activate.co.uk Model AD-SD & Model AD-SD-W PAGE 1 Product Information Our AD-SD Auto Dialler is a versatile unit which can be attached

More information

SA 2650 Kit User Manual

SA 2650 Kit User Manual SA 2650 Kit User Manual Table of Contents 1. System Installation Planning 1 2. Device Introduction 3 3. Getting Started 6 4. System Default Setting 10 5. Connect2Home Application 11 6. System Information

More information

CPVan Home Alarm Starter Kit

CPVan Home Alarm Starter Kit CPVan Home Alarm Starter Kit For CPVan Home Alarm System Box contents IMPORTANT: Please also refer to www.cpvans.com for further information and technical assistance. We are improving our site continuously

More information

Memcom Emergency Telephone

Memcom Emergency Telephone Memcom Emergency Telephone Installation Guide Ref No. 450 900 (GB) Version 2 + + Simple wiring for quick installation + + Integrated LCD display shows you what you have programmed + + All code based programming

More information

PORTAL USER MANUAL. Mobeye WaterGuard-FS. Float sensor CM2300FS. SW version 5.n

PORTAL USER MANUAL. Mobeye WaterGuard-FS. Float sensor CM2300FS. SW version 5.n SW version 5.n PORTAL USER MANUAL Mobeye WaterGuard-FS Float sensor CM2300FS Attention! Very important This user manual contains important guidelines for the installation and usage of the Mobeye device

More information

HomeSecure HS-BASIC-V2 Installation Manual: Table of Contents

HomeSecure HS-BASIC-V2 Installation Manual: Table of Contents Table of Contents 1 Introduction 4 1.2 Functions 4 INSTALLATION 2 Get Started 5 2.1 The Alarm Panel 5 2.2 Insert SIM Card 7 2.3 Start up the Alarm Panel 7 2.4 Alarm Panel Settings 7 3 Code Wireless Devices

More information

Summit 3208GLD USER MANUAL. Electronics Line

Summit 3208GLD USER MANUAL. Electronics Line Summit 3208GLD USER MANUAL Electronics Line Table of Contents 1: Introduction... 2 2: Overview... 3 3: Keypad Functions... 4 3.1: Keypads... 4 3.2: 3108 LCD Keypad Layout... 4 4: Basic System Operation...

More information

WiFi + PSTN. Smart Home Alarm System

WiFi + PSTN. Smart Home Alarm System WiFi + PSTN Smart Home Alarm System Content Preface Specifications Technical information Front side panel view Back side panel view Initialization APP names Add alarm host and connect WiFi for host How

More information

NX-148 LCD CODE PAD TABLE OF CONTENTS

NX-148 LCD CODE PAD TABLE OF CONTENTS NX-148 LCD CODE PAD TABLE OF CONTENTS Glossary Of Terms... 4 Understanding The Lights... 5 Code Pad Functions Arming In The ON Mode... 6 Making The System Ready To Arm... 7 Using Quick Arm... 7 Arming

More information

AGRI-ALERT 9600 ALARM SYSTEM USER MANUAL

AGRI-ALERT 9600 ALARM SYSTEM USER MANUAL AGRI-ALERT 9600 ALARM SYSTEM USER MANUAL M 890-00279 rev. 14 K 895-00004 rev. 00 Manufacturer: Viatron Electronics 5200, Armand-Frappier St-Hubert (Quebec) Canada J3Z 1G5 WARNINGS The warranty can be void

More information

3 User s settings. 3.3 Internal clock setting

3 User s settings. 3.3 Internal clock setting 2.9 Subsystem arming In a large building a sub control panel can be enrolled to the JA-63. The subsystem reports all alarms and failures to the main system. The installer can program if the systems will

More information

Installation Manual Premier Elite IXP-W

Installation Manual Premier Elite IXP-W Installation Manual Premier Elite IXP-W INS538-2 1. Contents 1. Contents... 2 2. Premier IXP-W Interface... 3 Premier Elite 8XP-W & 32XP-W Firmware... 3 3. Quick Start Guide... 4 4. System Overview...

More information

Shenzhen SUNSKY Technology Limited

Shenzhen SUNSKY Technology Limited LCD type GSM &PSTN dual network alarm system user manual(208-8) A main features Welcome you use the LCD display GSM&PSTN alarm system, its main features as follows, 1. 99 alarm zones,93 wireless zones

More information

User s Guide. SUB-MA7240O-0001.OG.Solution doc. Created: 6/05/03. Last Updated: 23/09/03. MA7240AO-0001 Version 1.0

User s Guide. SUB-MA7240O-0001.OG.Solution doc. Created: 6/05/03. Last Updated: 23/09/03. MA7240AO-0001 Version 1.0 User s Guide SUB-MA7240O-0001.OG.Solution40-111.doc Created: 6/05/03 Last Updated: 23/09/03 MA7240AO-0001 Version 1.0 2 Table Of Contents User List...6 Quick Reference..7 Features...7 Keypad User's Guide...8

More information

TT16 RFID COLOR SCREEN INTELLIGENT GSM NETWORK ALARM SYSTEM. MODEL: KR-G19 BRAND: KERUI Secrui Electronic Co., Ltd

TT16 RFID COLOR SCREEN INTELLIGENT GSM NETWORK ALARM SYSTEM. MODEL: KR-G19 BRAND: KERUI Secrui Electronic Co., Ltd TT16 RFID COLOR SCREEN INTELLIGENT GSM NETWORK ALARM SYSTEM 4px, Unit 5, Trident Way UB25LF Southall UNITED KINGDOM CONTACT: 02081278528 MODEL: KR-G19 BRAND: KERUI Secrui Electronic Co., Ltd Standards

More information