IT AFEM. Table of Contents. Error! Table not allowed in footnote, endnote, header, footer, comment, or text box.

Transcription

1 IT AFEM Table of Contents Error! Table not allowed in footnote, endnote, header, footer, comment, or text box. IT [Type text] B [Type text]

2 TEKPAN AUTOMATIC FIRE EXTINGUISHING SYSTEM New age patented design Automatic Fire Extinguishing System is the product of an environmental friendly technology. Halon was being used as the most effective method for fire fighting, but in 1987 with the Montreal Protocol it was disclosed as being a very potent destroyer of the OZONE LAYER. As a result, developed countries have already managed to prohibit production of halon. Whereas AFEM is developed to detect and extinguish fire locally in faster way with environmentally safe technology. The AFEM module can be easily installed without any need of piping or power supply to any place that present a potential risk of fire such as electrical cabinets, generators, rooms, machines etc. With a special chemical formula that not affect electrical and electronic devices and doesn t require any maintenance. AFEM can be used in all types of electrical cabinets like switchgear, telecom, mcc, automation panels. Plus, can be attached to transformers, generators and panel controlrooms. It can be installed in IT server cabinets and network rooms. Also due to its design AFEM is suitable to be installed in motor rooms of ships and boats in marine applications. 1

3 3 TIMES MORE EFFECTIVE OPERATING PRINCIPLE 1. Step: Fire propagates by chain reaction via O, H and OH molecules. 2. Step: AFEM releases (K) potassium radicals into the flame chain reaction. 3. Step: K radicals attach itself to O, H, OH and remove them from the flame chain reaction. O 2 O 2 O 2 O 2 O 2 O 2 O 2 O 2 O 2 O K O H OH K K K K O H OH Flame Chain Broken H O K FUEL AFEM H FUEL FUEL K (CnHm) (CnHm) (CnHm) 2

4 ADVANTAGES No need of power supply. PATENTED DESIGN Ability to detect fire at minimum time. Ability to extinguish fire at minimum time before it spreads out. Sends signal to central alarm system and other warning systems. During the extinguish process it doesn t damage electrical and electronic equipment which will operate normally after fire is put out. No need for any maintenance or service. Ability to be installed in all kinds of cabinets and enclosures easily. Environmentally friendly. Harmless to humans 3

5 COMPARISON OF EXTINGUISHING CAPABILITY AFEM Halon 1301 Inergen FM CO 2 4

6 COMPARISON OF THE DIFFERENT EXTINGUISHING AGENTS AGENT EFFECT ON PEOPLE EFFECT ON GOODS EFFECT ON THE ENVIRONMENT AFEM Chemical concentration is not harmful to people. Does not cause any defect to goods. Totally environmental - friendly. HALON Accepted that halon is not harmful to people, but it is banned for use since Does not cause any defect on goods. Banned to use because of bad effect on environment. CO 2 It can be dangerous for people when used in closed space. The cooling effect can cause damage to electronic equipment In general, more CO 2 is produced than other sources WATER In electrical systems water can cause shock to people. Cause considerable damage to electronic equipment and installations. Dangerous gases can be produced which are harmful to the environment. FOAM AND WATER If used in a closed system, it is necessary to protect people. Cause considerable damage to electronic equipment and installations. Also corrosion potential. It may be difficult to remove the foam, can be very dangerous for water plants and aquatic animals. INERT GAS It can lead to insufficient oxygen being supplied to the brain. Does not cause any damage to goods. Not harmful to the environment. ENVIRONMENTAL COMPARISON AGENT O.D.P G.W.P TOXICITY CONDUCTIVITY VOLUMETRIC EFFICIENCY EXTINGUISHING CAPACITY AFEM NIL NIL NIL none, up to V EXCELLENT 65 g/m 3 HALON 1301 HIGH MODERATE LOW LOW GOOD g/m 3 OTHER GAS-FORMING EXTINGUISHING AGENT LOW LOW MODERATE LOW LOW g/m 3 CO 2 LOW MODERATE HIGH LOW LOW g/m 3 5

7 AFEM - PANEL OR CABINET MODULES MODELS ACTIVATE AT 72 O C INITIAL AMBIENT TEMPERATURE MODEL MAX PROTECTED VOLUME (m 3 ) DISCHARGE TIME (s) MASS (kg) DIMENSIONS (WxDxH)(mm) REFERENCE CODE AFEM Z ,6 193x162x AFEM Z ,7 193x162x AFEM ,8 193x162x AFEM ,3 220x242x AFEM ,6 220x242x MODELS ACTIVATE AT 110 O C INITIAL AMBIENT TEMPERATURE MODEL MAX PROTECTED VOLUME (m 3 ) DISCHARGE TIME (s) MASS (kg) DIMENSIONS (WxDxH)(mm) REFERENCE CODE AFEM Z ,6 193x162x AFEM Z ,7 193x162x AFEM ,8 193x162x AFEM ,3 220x242x AFEM ,6 220x242x APPLICATION EXAMPLE : PANEL DIMENSION : 80w x 210h x 60d (cm) PANEL VOLUME : 1 m 3 APPLICABLE AFEM MODULE : AFEM - 1 PANEL DIMENSION : 240w x 210h x 60d (cm) PANEL VOLUME : 3 m 3 APPLICABLE AFEM MODULE : AFEM - 5 (for Middle section) or 3 pcs AFEM - 1 (for All section) IMPORTANT NOTE : In the panels where more than one AFEM Module is used, it is possible to connect up to 4 modules with cables in parallel to improve extinguishing performance.. If there are 5 or more AFEM modules, it is necessary to use a PARALLEL MODULE (see page 11). 6

8 APPLICATION EXAMPLES OF AFEM IN ELECTRICAL CABINETS

9 APPLICATION EXAMPLES OF AFEM IN ELECTRICAL CABINETS

10 IT AFEM - PANEL MODULE TERMINAL DIAGRAM AFEM Panel Modules don t require power supply for operation. But, there is a standard terminal block on the module for parallel connection and to carry signals to the central alarm system (if necessary). SINGLE OPERATION DP DO 1 DO 2 DO1 : To the fire alarm panel (dry contact) DO2 : Aux contact output (dry contact) NO C NC NO C NC DP : Parallel commissioning terminals ( not used for single operation) Note : Auxiliary contacts can be used to energize siren - pilot lights, to stop panel cooling fans, or to release main circuit breaker of the panel. NO/NC : 24 VDC 1A max 110 VAC - 0,5A max PARALLEL WORKING (MULTIPLE MODULES) (-) (+) to Module-3 Parallel Connection Cable NO C NC NO C NC NO C NC NO C NC MODULE - 2 MODULE - 1 It is possible to use up to 4 AFEM Modules in parallel. To use more than 4 AFEM Modules in parallel, see page 11. ACTIVATION TIMES FOR AFEM - PANEL MODULES AFEM Activation Temperature Initial Ambient Air Temperature 0 0 C Temperature Increase Rate 30 0 C /min Max. Time Delay (s) Min. Time Delay (s) Temperature Increase Rate 3 0 C /min Max. Time Delay (s) Min. Time Delay (s) 72 0 C 35 0 C C 70 0 C

11 IT MODEL MAX. PROTECTED VOLUME (m 3 ) AFEM - ROOM MODULES DISCHARGE TIME (s) MASS (kg) DIMENSIONS D/Ø (mm) REFERENCE CODE AFEM < / AFEM < ,5 254/ AFEM < / AFEM < ,5 450/ AFEM 30 E (1) 30 < / AFEM 50 E (1) 50 < ,5 353/ (1) These modules are working as radial spraying. AFEM room models are working with detectors placed separately, please choose the appropriate detectors with AFEM - room modules. DETECTORS FOR AFEM - ROOM MODULES Model Activation Temp. Reference Code Max. Volume AFEM - X72 72 C m 3 AFEM - X C m 3 Note : AFEM - X detectors can not be used in places of more than 15 m 3 volume. If volume of the room is more than 15 m 3, it is necessary to combine smoke and heat detectors into the system. Model Working Range Reference Max. area for 1 pcs Smoke Detector 0-49 C m 2 Heat Detector 0-49 C m 2 Smoke + Heat Detector 0-45 C m 2 APPLICATION EXAMPLE : DIMENSIONS : 300 w x 200 h x 200 d (cm) VOLUME OF ROOM : 12 m 3 FLOOR AREA OF ROOM : 6 m 2 APPROPRIATE AFEM : AFEM 20 APPROPRIATE DETECTOR : AFEM - X110 or 1 pcs. Smoke Detector + 1 pcs. Heat Detector DIMENSIONS : 1000 w x 300 h x 500 d (cm) VOLUME OF ROOM : 150 m 3 FLOOR AREA OF ROOM : 30 m 2 APPROPRIATE AFEM : 3 pcs. AFEM 50 or 5 pcs. AFEM 30 APPROPRIATE DETECTOR : 2 pcs. Smoke Detector + 2 pcs. Heat Detector IMPORTANT NOTE: If Smoke or Heat detector is used, it is necessary to use Parallel Module (see page 11). 10

12 IT PARALLEL MODULE (MULTIPLE ACTIVATION) Parallel Module ( Multiple Activation) is used when is necessary to activate more than 4 AFEM modules at the same time or while smoke and heat detectors are used. Activating AFEM Panel modules at the same time in panels, can improve the effect of the extinguishing system. Model ( WxDxH) (mm) (kg) Reference Code Parallel Module 350 x 250 x PROPERTIES : - It can be fixed in or out of panel - room. - Operates with 230 VAC power supply. - Output terminals for up to 14 AFEM modules. - Terminals for 14 pcs. smoke + 14 pcs. heat detector. - Transfers an alarm signal to the Central Fire Panel and other devices during activation. - Display the status of internal check. The connection between PARALLEL MODULE and AFEM MODULES is done by using a Parallel Connection Cable (see page 13). PARALLEL MODULE - TERMINAL BLOCK OK I DO1 DO 2 DP DI DO DP DI DO XP L N PE NO C NC NO C NC X R +24V X NO C NC R +24V X NO C NC X DP DI DO DP DI DO DP DI DO X R +24V X NO C NC X R +24V X NO C NC R +24V X NO C NC X DP DI DO DP DI DO DP DI DO X R +24V X NO C NC X R +24V X NO C NC R +24V X NO C NC X DP DI DO DP DI DO DP DI DO X R +24V X NO C NC X R +24V X NO C NC X R +24V X NO C NC DP DI DO DP DI DO DP DI DO X R +24V X NO C NC X R +24V X NO C NC X R +24V X NO C NC XPI : Power Supply 230 VAC. XPDO1 : Parallel module fault status contact (dry contact). XPDO2 : Parallel module fire alarm contact (dry contact). X1DP : Multiple activation input. X1DI : +24 V contact output and input. X1DO : Local status contact output (dry contact). 11

13 PARALLEL MODULE AND AFEM PANEL MODULE EXAMPLE CONNECTION SCHEMA AFEM PANEL MODULE AFEM PANEL MODULE N0 C NC NO C NC N0 C NC NO C NC x R + 24V X N0 C NC R + 24V X N0 C NC x2 PARALLEL MODULE PARALLEL MODULE AND AFEM ROOM MODULE EXAMPLE CONNECTION SCHEMA AFEM ROOM MODULE - 1 HEAT DETECTOR - 1 SMOKE DETECTOR - 1 AFEM ROOM MODULE C NO + - C NO X1 X R + 24V X N0 C NC R + 24V X N0 C NC PARALLEL MODULE X R + 24V X N0 C NC X R + 24V X N0 C NC + - C NO + - C NO AFEM ROOM MODULE - 3 HEAT DETECTOR - 2 SMOKE DETECTOR - 2 AFEM ROOM MODULE

14 PARALLEL CONNECTION AND INSTALLATION CABLES FIRE - RESISTANT HOLOGEN - FREE CABLE PROPERTIES : - Does not contain halogen mm, continuous operation in fire. - Working temperature - 30 C to + 90 C - Nominal voltage 300V / 500V - Test voltage 2000V - Insulation voltage 200 mω x km - Fiberglass band, with five barrier, orange color. - Self - extinguishing and fire - resistant. - Creates less smoke gas, and does not block emergency exits. STANDARDS: IEC / /61034 /60754 Cable Length Cross Section (mm 2 ) Diameter (mm) Without Screen Reference Code Screened Mass kg/km 1 m 4x1, m 4x1, m 4x1, m 4x1, While selecting cables, place and the application must be considered. If parallel module is not used, the cable length between two modules must not exceed 3 m. If cables run through high frequency energy zone, the cable should be shielded. If cables run through an electric magnetic fields of high density, such as high voltage transformers in power substations or cable tunnels, the cable should be enclosed in a steel conduit. If there is a mechanical potential of any damage, the cable should be enclosed into a plastic or metal conduit. 13

15 IT AFEM MARINE APPLICATIONS AFEM Modules are suitable for Marine usage. The cables inside the module are suitable for marine applications. Also, the metal parts and screws of module are stainless products. AFEM operates without power supply, it s not harmful for human health, environmentally friendly and does not cause any damage to motors, because of these reasons it is easy and useful for mercantile marines, recreational boats and yachts. MODEL MODELS ACTIVATE AT 72 C INITIAL AMBIENT TEMPERATURE MAX. PROTECTED VOLUME (m 3 ) DISCHARGE TIME (s) MASS (kg) DIMENSIONS (WxDxH)(mm) REFERENCE CODE AFEM Z ,6 193x162x AFEM Z ,7 193x162x AFEM ,8 193x162x AFEM ,3 220x242x AFEM ,6 220x242x MODEL MODELS ACTIVATE AT 110 C INITIAL AMBIENT TEMPERATURE MAX. PROTECTED VOLUME (m 3 ) DISCHARGE TIME (s) MASS (kg) DIMENSIONS (WxDxH)(mm) REFERENCE CODE AFEM Z ,6 193x162x AFEM Z ,7 193x162x AFEM ,8 193x162x AFEM ,3 220x242x AFEM ,6 220x242x EXAMPLE: MOTOR 150 MOTOR MOTOR CABIN DIMENSION : 100 w x 100 h x 150 d (cm) MOTOR CABIN VOLUME : 1,5 m 3 APPROPRIATE AFEM MODULE : AFEM - 2 MOTOR CABIN DIMENSION : 300 w x 100 h x 300 d (cm) MOTOR CABIN VOLUME 6 m 3 APPROPRIATE AFEM MODULE : 2 psc. AFEM - 5 IMPORTANT NOTE: In the cases where more than one AFEM Module is used, it is possible to connect them in parallel to improve extinguishing performance, by activating them all together. It is possible by using parallel connection cable for up to 4 AFEM modules. If there are 5 or more AFEM modules, it is necessary to use PARALEL MODULE (see page 11). 14

16 IT ENCLOSURE SYSTEMS AFEM MARINE APPLICATIONS MOTOR CABIN 15

17 AFEM ALTERNATIVE APPLICATIONS AFEM Panel Modules with a throwing kit can be used to extinguish fire by throwing it to the fire. This method is effective and safe when it is not possible to fight fire from closer distances. It should be thrown in the center of fire, in parallel to the ground from c height. Throwing Kit A Used Module AFEM Z3 AFEM Z6 AFEM 1 Reference Code B AFEM 2 AFEM It is recommended to use Afem Panel modules, which activates at 72 C initial temperature, for this kind of throwing applications (see page 6). 16

18 ACCESSORIES MODULE TERMINAL Number of Poles Cable Cross Section Pin Distances Reference Code 10 0,2-2,5 mm 2 5,08 mm MODULAR BEACONS AND TOWER LIGHT LED MODULE 70 mm STEADY LIGHT IP65 Color 24VAC / DC 230VAC Green Red Yellow BUZZER MODULE Db IP65 Power Supply 24VDC 230VAC CONNECTION EQUIPMENTS Horizontal Fixing base Vertical Fixing base Plastic Fixing base 100 mm Aluminium Tube SIRENS Power Supply 24VDC 230VAC Multiple Tones Electronic Siren with yellow light 8 different tones 103 db IP Electronic Siren 63 different tones 120 db IP Siren with Motor 24VDC

19 AFEM MODULES TECHNICAL PROPERTIES AND EXPLANATIONS Fire Classifications: Class A Combustible Solids Class B Flammable Liquid Class C Flammable Gases Class E Electrically Energised Fire Service Life: For single activation, lifetime is 7 years Handling and Transport: Dangerous goods class : 4.1 UN.No : 3178 Packing Category C Hazchem Code : 1 [T] Min. Activation Voltage: 3,6 VDC Activation Current : 1,2A Aux Contact Currents: 1A 24 VDC / 0,5A 110 VAC Vibration Limits : 0,5-200 with 4g acceleration Impact Limit : 4g 2-50 miliseconds Ex Proof Area Usage: 2Exe IIT6 Category Relative Humidity : % 98 Maximum Drawings : See Page IMPORTANT NOTES: - AFEM, Automatic Fire Extinguishing Module, is for only single use. It cannot be used for a second time. It must be replaced with a new AFEM Module, after the fire. - If the product is not used (activated) for 7 (seven) years or more, it should be replaced with a new AFEM module. AFEM module does not require any maintenance operations during this period. - The appropriate AFEM Module should be selected according to volume of the protected area, by using the tables in pages Max protected area of a single AFEM Module cannot exceed Height (m) x width (m) x Length (m) - AFEM modules should be located in the middle of the protected area at mm below the ceiling. - The length of the cable between two devices in a loop should not exceed 3 meters. - It is possible to connect a max. of 4 AFEM Modules in Parallel, without using the optional Parallel Module. - AFEM modules can be used in the areas with electromagnetic fields of high density. - Pull the small pin on the AFEM Module to activate after completion of all installation actions. CAUTION : Afem, Automatic Fire Extinguishing System, is an extra protection equipment against fire danger. All other safety precautions against fire, that are mentioned in occupational health and the user must verify existing local laws and regulations. AFEM distributor is not responsible for any material and moral damages that may occur due to fire. 18

20 TECHNICAL DRAWINGS AFEM Z3 - AFEM Z6 - AFEM 1 161, ,75 92,5 174,

21 TECHNICAL DRAWINGS AFEM 2 - AFEM , ,5 220,

22 TECHNICAL DRAWINGS AFEM - ROOM MODULE DIMENSIONS (mm) A B AFEM AFEM AFEM AFEM AFEM 30E AFEM 50E AFEM - ROOM MODULE, FIXING DIMENSIONS (mm) a b c d AFEM AFEM AFEM AFEM IT Enclosure Systems 8 Abri Du Bois Chelsea, QC, CANADA TEL: FAX: contact@itenclosuresystems.com A