CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
|
|
- Adrian Wood
- 5 years ago
- Views:
Transcription
1 CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS)
2 Purpose of this Workshop 1.Fallswithinanintegratedtrainingprogrammepreparedby CYS, approved and funded by the Training Fund for the Hydrocarbons Sector, under the Ministry of Energy 2. Aims to bring together the major private stakeholders in the hydrocarbon sector and share a common aim 3. Common aim: Enhance high quality for the emerging hydrocarbon sector in Cyprus, through the use of standards as a support tool for regulators and private stakeholders 4. To underline the CYS important role in the Hydrocarbon Sector 5. Gain good practices from the mature Dutch Model and assist CYS for future actions & plans serving the common aim
3 Topics 1. About CYS & European Standardisation 2. CYS role in the Oil & Gas Industry 3. CYS actions & plans for the Standardisation Sector of Oil & Gas
4 About CYS & European Standardisation
5 Terminology Standardization, is the voluntary process of developing technical specifications based on consensus among all interested parties such as: Regulators and competent Authorities Industry including Small & Medium sized Enterprises (SMEs) Consumers Academia & Research Organisations Environmental and other NGOs Week stakeholders etc Source: E.C., D.G. Enterprise & Industry
6 Evolution of CYS 1975 Establishment of the National Standards Body of Cyprus 1977 Member of ISO & IEC 2002 Member of CEN, CENELEC & ETSI
7 Autonomy οf CYS Public Body Under full government control (Ministry of Commerce, Industry & Tourism) 2005 Today Independent (Autonomous) Body Under Private Law Recognized by government as the National Standards Body More flexible Better response Less expensive to operate
8 CYS Organizational Chart MINISTRY OF FINANCE (sole shareholder) BOARD OF DIRECTORS DIRECTOR GENERAL CYS DIRECTOR CCC DIRECTOR SECRETARIAL SUPPORT CHEMICAL SECTOR ADMINISTRATIVE SUPPORT ELECTROTECHNICAL SECTOR STANDARDISATION SECTORS MECHANICAL SECTOR CUSTOMER INFORMATION CENTRE CIVIL ENG. SECTOR TRAINING & INFORMATIVE SEMINARS I.T. SECTOR IT & ELECTRONIC SUPPORT CYPRUS CERTIFICATION COMPANY (CCC)
9 CYS Main Activities Manages the National Standardisation System Adopts all EN s and useful International Standards Organises informative seminars/lectures about quality Offers training seminars about standards Signs MOU s internally and abroad Issues brochures and special editions on standards Publishes articles in the press and media etc
10 Why is Cyprus Involved in European Standardization? It is a conventional obligation To gain understanding and awareness about EN standards To promote and protect national interest on technical issues To adopt, distribute and promote EN standards within the Cyprus economy (upgrade quality of products and services) To be informed about new developments in standardization
11 Our Vision The use of International and European Standards as an effective tool for continuous improvement of quality of life in the contemporary Cyprus community Our Mission A. Strengthen the national standardization system in order to effectively promote National interest at the European and International Standardization System B. Promote EN standards into the Cyprus Market to strengthen the competitiveness of the economy, to protect the environment and to safeguard the H&S of consumers overall, upgrade the quality of life of the society as a whole
12 CYS Follows the European Standardization Work 748 European Standardization Committees exist CEN 413 CENELEC 207 ETSI 128 CYS participates in 35 T.C s but votes adopts all EN drafted ISO & IEC,CYS follows the work of 50 T.C. s only, those with National interest
13 CYS Mirror Committees MC 1 MC 2 MC 3 MC 4 MC 5 MC 6 MC 7 MC 9 MC 10 MC 11 MC 12 MC 13 Construction Products & Civil Engineering Mechanical Engineering Healthcare Health & Safety Heating, Cooling & Ventilation Transport & Packaging Telecommunication & Information Technology Chemicals & Environment Gas Food & Biotechnology Services Electrical & Electronic Equipment Electrical & Electronic Medical Devices
14 Standardisation in the Oil & Gas Industry More than 1200 standards exist, drafted by more than 60 Organisations globally: international national regional industry
15 Standards & Regulators in Oil & Gas References of standards On a global basis: Industry 44% National & Regional 35% International 21% On a regional basis: SOs in America 40% European 24% International 21% National (India, Australia, New Zeeland) 15%
16 Standards & Regulators in Oil & Gas API ANSI/ASME UL NORSOK ASTM BS CAN/CSA DNV EN IEC NFPA UKOOA ISO STANDARDS REFERENCED BY NATIONAL REGULATORS Source: Levantine Training Centre
17 Standards & Regulators in Oil & Gas NUMBER OF STANDARDS REFERENCED BY EUROPEAN REGULATORS, 1996 vs Source: Levantine Training Centre
18 CYS role in the Oil & Gas Industry
19 SUPPORT LOCAL STAKEHOLDERS ON QUALITY ISSUES QUALITY STANDARDISATION CERTIFICATION
20 HOW CYS SUPPORTS LOCAL STAKEHOLDERS ON QUALITY ISSUES Offers Standardisation Services to the Public & Private sectors Support National legislation Advice on excising ISO/CEN standards Support on drafting new National standards Use the data base of standards through CYS Participate in ISO/CEN Technical Committees (TCs) Participate in CYS Technical Committees (TCs) Observer in ISO/CEN Technical Committees (TCs) Comment on pren & ISO DIS Other
21 CYS actions, achievements & plans in Standardisation for the Hydrocarbon Sector
22 Trainings Sep Overview of the International O&G Industry & Regulatory Framework, Pestle Analysis & International Standards in O&G Levantine Training Centre 3 4 Nov & 1 4 Dec CYS Integrated Hydrocarbons Training Programme by SII Training received from the Standardisation Institute of Israel (SII) on how to develop the standardisation infrastructure for the hydrocarbons sector in Cyprus
23 Trainings Nov ISO 29001:2010 Oil & Gas Industry QMS Auditor/Lead Auditor Training Course IRCA approved course delivered by Integrated Management Systems Associates Ltd (IMSA UK) 02 Nov & Dec CYS Integrated Hydrocarbons Training Programme by NEN Training received from NEN on how CYS may administer the National Standardization System for the H/C sector and identify the vital role of standardisation as a quality tool for the H/C sector in Cyprus
24 Bilateral Co operation Agreements 1. MoUs with Standards Institute of Israel (SII) Lebanese Standards Institution (LIBNOR) Egyptian Organisation for Standardisation & Quality (EOS) (signature stage)
25 Establish relations internally 2. Meetings with Hydrocarbon Service of the Ministry of Energy, Commerce, Industry & Tourism Ministry of Agriculture, Rural Development and Environment Department of Labour Inspection of the Ministry of Labour, Welfare and Social Insurance Cyprus Energy Strategic Council, Advisory Body to the President of the Republic Others to follow soon
26 European & International Standardisation Arena in the O&G Sector 3. Twinning Secretariat CYS NEN (July 2015) CEN/TC12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Participate at IOGP Standards Committee meetings Participate at the meetings of the ISO/TC67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
27 Planning Future Actions (under consideration) Build up a Team for Hydrocarbons issues, within the Secretariat of CYS to monitor and manage standardisation issues relevant to the H/C Sector Establish official, stable and ongoing co operation with local Regulators in order to be updated on the strategic plans and progress of projects in the H/C Sector and always act as an assisting valuable partner within CYS s mission Set up the CYS National Standardisation Council (CYS/ΣΥΤΥ) to take decisions on strategy and actions related to quality and standards issues in support of the H/C Sector
28 Planning Future Actions (under consideration) Create a National Fund for Quality in the Hydrocarbon Sector aiming to support and facilitate the smooth operation and provision of services of the quality infrastructure in the H/C sector Development and implementation of a National Strategic Plan for Quality in the Oil & Gas Sector which will include actions aiming the continuous improvement of the H/C sector utilizing quality tools i.e. standards, certifications schemes etc
29 CYS: A VALUABLE PARTNER FOR ALL STAKEHOLDERS Thank you for your attention! Pambos Kammas Director Standardisation, CYS
The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationRole of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationEU Standardization & EU Service Standardization
EU Standardization & EU Service Standardization Dr. Betty Xu Seconded European Standardization Expert in China (SESEC) 7 th Sept 2015 EU Standardization & EU Service Standardization Content Table 1. SESEC
More informationCEN/TC 391 Business Plan Revision Nov 2010 Page 1 EXECUTIVE SUMMARY
Page 1 EXECUTIVE SUMMARY Business Environment A wide range of threats and hazards can result in destabilising or disruptive events and escalate towards unpredictable and large scale consequences for Societal
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationEuropean Standardization for the Natural Gas Infrastructure
European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009 Content The standards framework Benefits
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationEurocodes and National Annexes Republic of Macedonia
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy Eurocodes and National Annexes Republic of Macedonia Institute of the Republic of Macedonia ISRM History of Macedonian
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More informationAssessment. Strategic. Environmental. & Land Use Planning in Lebanon. Funding: European Commission LIFE Third Countries Programme.
Strategic Environmental Assessment & Land Use Planning in Lebanon Funding: European Commission LIFE Third Countries Programme Execution: Ministry of Environment (MoE) Service of Conservation of Nature
More informationCEN and CENELEC Organisational description & functions International and regional activities
CEN and CENELEC Organisational description & functions International and regional activities Eric Marchand Programme Manager International Cooperation, CEN-CENELEC Management centre Overview CEN and CENELEC
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationBUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
More informationBUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
More informationStandards and Standardisation. An Overview
Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing
More informationInteroperability from the perspective of standards
Interoperability from the perspective of standards Alina IATAN CEN and CENELEC General considerations about European Standrads CEN and CENELEC 2018 2 Facts and figures about CEN and CENELEC 465 CEN/CLC
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationEuropean Standards: Supporting the European Single Market for Services
2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationJOINT DECLARATION BETWEEN THE EUROPEAN UNION AND THE REPUBLIC OF INDIA ON A PARTNERSHIP FOR SMART & SUSTAINABLE URBANISATION. New Delhi, 6 Oct 2017
JOINT DECLARATION BETWEEN THE EUROPEAN UNION AND THE REPUBLIC OF INDIA ON A PARTNERSHIP FOR SMART & SUSTAINABLE URBANISATION New Delhi, 6 Oct 2017 The Republic of India and the European Union, CONSIDERING
More informationThe standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar
The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationBusiness Plan CEN/TC 172 PULP, PAPER AND BOARD
Page: 1 Business Plan CEN/TC 172 PULP, PAPER AND BOARD Introduction CEN Technical Committees and Business Planning The extension of formal business planning to CEN Technical Committees (CEN/TCs) is an
More informationGLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017
GLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017 Contents 1. Foreword... 1 2. Alignment of European and ISO/IEC deliverables... 2 2.1. Level of alignment between CEN and ISO deliverables... 2
More informationStandards for ITS, the perspective of CEN/TC278
Standards for ITS, the perspective of CEN/TC278 Henk Stoelhorst Chairman CEN/TC278 10 FEB 2010 Presentation content ITS standards Why do we need ITS standards The standards bodies CEN/TC278: ITS standards
More informationISO and services ANSI Conference: Standards and the Service Economy. Presented by Kevin McKinley Acting Secretary-General, ISO
2015 ANSI Conference: Standards and the Service Economy ISO and services Presented by Kevin McKinley Acting Secretary-General, ISO September 29, 2015 1 Part of the World Standards Week 2015 series of events
More informationSMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice
SMB/4676/R IEC/TC or SC TC 62 Secretariat Germany STRATEGIC BUSINESS PLAN (SBP) Date 2011-09-23 Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationEUnetHTA The European network for Health Technology Assessment
EUnetHTA The European network for Health Technology Assessment EUnetHTA Training Course for Stakeholders Rome, 29 Oct 2014 Marianne Klemp, Research Director, NOKC, Norway Historical Timeline of EUnetHTA
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationStandardization of diagnostic methods. Patrizia Rossi
Standardization of diagnostic methods Patrizia Rossi Istituto Superiore di Sanità, Rome, Italy What is a standard? International Standards provide a reference framework, or a common technological language,
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationStandardization through the European Committee for Standardization. Thomas Fischer SUB Göttingen
Standardization through the European Committee for Standardization Thomas Fischer SUB Topics What is CEN? How does CEN work? Examples of recent activities What does this mean for CASHMERE-Int? 2 What is
More informationResolution XII NOTING also that with the increasingly rapid urbanization, wetlands are being threatened in two principle ways:
12 th Meeting of the Conference of the Parties to the Convention on Wetlands (Ramsar, Iran, 1971) Punta del Este, Uruguay, 1-9 June 2015 Resolution XII.10 Wetland City 1 Accreditation of the Ramsar Convention
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationDraft Resolution XII.10
12 th Meeting of the Conference of the Parties to the Convention on Wetlands (Ramsar, Iran, 1971) Punta del Este, Uruguay, 1-9 June 2015 Ramsar COP12 DR10, Rev. 2 21:45, 8 June Draft Resolution XII.10
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationINTERNATIONAL COOPERATION IN STANDARDIZATION
EU-Russia cooperation on standardisation for construction Moscow, 9-10 October 2008 1 EU-Russia cooperation on standardization for construction INTERNATIONAL COOPERATION IN STANDARDIZATION Amilcar da Costa
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
More informationContact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:
Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationAnnex D: Project Logframe Matrix
Annex D: Project Logframe Matrix OVERALL OBJECTIVE: Protect the unique ecosystems and biodiversity along the Sava River through supporting Croatia and Bosnia-Herzegovina in a) improving transborder cooperation
More informationStatus Report of the SPE Oil and Gas Reserves Committee Where Is Our Focus?
Status Report of the SPE Oil and Gas Reserves Committee Where Is Our Focus? John Ritter Chair Society of Petroleum Engineers (SPE), Oil and Gas Reserves Committee (OGRC) Ad Hoc Group of Experts on the
More informationType 5 Certifications:
: What are they and how do you use them for compliance? Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Contents... 1 Introduction... 1
More informationHow keep.eu can be used? Baiba Liepa, Interact Programme
How keep.eu can be used? Baiba Liepa, Interact Programme What is keep.eu Knowledge management tool including database, website, search engine Available on www.keep.eu The only source of aggregated information
More informationCompilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationBehind the scenes of ISO 22301
Behind the scenes of ISO 22301 Stefan Tangen Secretary of ISO/TC 223 Societal security So how does standardization work in practice? Example on cargo security SWEDEN 2001 Safe Swedish rules Stakeholders
More informationEU Interregional Cooperation
EUROPEAN REGIONAL DEVELOPMENT FUND EU Interregional Cooperation State of play, priorities and funding criteria Erwin Siweris Joint Technical Secretariat The new INTERREG 2014-2020 25 November 2013, Halle
More informationStandardization. Introduction to standardization for Aalto University Jukka Alve
Introduction to standardization for Aalto University 2018-02-01 Jukka Alve 2 Overview in General What is standardization? What is a standard? Principles of standardization Motivation for making a standard
More informationGI Standardization Overview
Second workshop on the use of GIS/OGC standards in meteorology GI Standardization Overview 1 nicolas.lesage@ign.fr 12 Janvier 2009 Modèle TN-02.018-1.1 The goal of standardization According to decree number
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationDGE 2 EUROPEAN UNION. Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject: REGULATION
More informationIntroduction to ISO and ISO membership
Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable
More informationWorkshop on the Management of Historic Urban Landscapes of the XXth century, December 2007 Chandigarh, India
Workshop on the Management of Historic Urban Landscapes of the XXth century, 18-21 December 2007 Chandigarh, India INTRODUCTION The participants of the International Workshop on the Management of Historic
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
QC 080000 Edition 3.0 2012-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management System Requirements (HSPM) INTERNATIONAL ELECTROTECHNICAL
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationOpportunities in the DG JRC Enlargement and Integration Action
Opportunities in the DG JRC Enlargement and Integration Action Dr. Ole-Peter Ostermann, DG JRC, Enlargement and Associated Initiatives The Use of the Eurocodes in the Mediterranean Countries Varese 27
More informationOverview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)
Annex 9 verview of standardization and mandatory technical regulation systems of Turkmenistan (gas and electricity) Prepared by: Reviewed by: Quality Assured by: Leonid Malov Viktor Petrenko Volodymyr
More informationRoad Map and Action Plan for Azerbaijan on harmonisation of standards and codes in electricity and gas sectors
Road Map and Action Plan for Azerbaijan on harmonisation of standards and codes in electricity and gas sectors INOGATE Technical Secretariat and Integrated Programme in Support of the Baku Initiative and
More informationBUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
More informationFor IEC use only. SMB Meeting 157, Frankfurt
For IEC use only SMB/5906/SBP 2016-05-27 INTERNATIONAL ELECTROTECHNICAL COMMISSION STANDARDIZATION MANAGEMENT BOARD SUBJECT SMB Meeting 157, Frankfurt Updated Strategic Business Plan of IEC TC 97, Electrical
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationESSENTIALS. Annual Report. The full version is available on online
ESSENTIALS Annual Report 2017 The full version is available on online an act of collective wisdom Marc Ventre, AFNOR Chairman Olivier Peyrat, AFNOR Managing Director Voluntary standardization is a form
More informationBSI the UK National Standards Body: The Role of Standards
BSI the UK National Standards Body: The Role of Standards Anthony Burd - Head of Sector - Construction Copyright 2012 BSI. All rights reserved. This Session The BSI Group and the role of standards British
More informationBUSINESS PLAN. CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY Business Environment Protection of people and property in a society that is confronted with criminal and terrorist dangers
More informationSprinklers in Europe known problems and misconceptions. Alan Brinson
Sprinklers in Europe known problems and misconceptions Alan Brinson Over 100 members from 18 countries Insurers, laboratories, consultancies, fire brigades, sprinkler industry Mission to improve fire safety
More informationAPPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C
C C C CYPRUS CERTIFICATION COMPANY Α. COMPANY INFORMATION COMPANY NAME: (in Greek) (in English)......... Company Registration Number:.... COMPANY ADDRESS: (in Greek).... (in English)..... CITY: Post Code:..
More informationRequest for tender regarding the validation of ammonia testing methods as supplement to pren 16516
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. Box 5059 2623 AX DELFT 2600 GB DELFT date The Netherlands The Netherlands 2015-10-01 Telephone: +31 15 2 690 280 CEN/TC 351 N 0644
More informationCEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS 2017-12-08 ØIVIND ROOTH, CHAIR CEN/TC442 11.12.2017 2 What is BIM? BIM - Building Information Modelling Is an industry
More informationBUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
More informationNew Legal Framework Carlo Casati
New Legal Framework Carlo Casati Milan, 1 April 2016 Summary New Legislative Framework Market Surveillance Conformity Assessment CE Marking 2 06.11.2013 NOTIFIED BODY TRAINING 01 New Legislative Framework
More informationCross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities
Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities IoT for Smart Cities and Communities Bilbao (2018-06-06) CEN and CENELEC 1 Who we are & Where do we fit in International
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationTHE MINISTRY OF INFRASTRUCTURE AND THE ENVIRONMENT OF THE KINGDOM OF THE NETHERLANDS
MEMORANDUM OF UNDERSTANDING between THE DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT OF THE UNITED STATES OF AMERICA and THE MINISTRY OF INFRASTRUCTURE AND THE ENVIRONMENT OF THE KINGDOM OF THE NETHERLANDS
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationLATEST HYDROCARBON-BASED REFRIGERATION TRENDS
LATEST HYDROCARBON-BASED REFRIGERATION TRENDS René van Gerwen, ENTROPY Cooling Solutions - Tour around the Globe - Regulations, Codes, Standards & Guidelines - Skills, Training & Certification - Conclusions
More informationSOUTH AFRICA S PREPARATIONS FOR HABITAT III COMMON AFRICAN POSITION FOR HABITAT III. Habitat III Urban Breakfast 5 October 2016
SOUTH AFRICA S PREPARATIONS FOR HABITAT III COMMON AFRICAN POSITION FOR HABITAT III Habitat III Urban Breakfast 5 October 2016 Context and Background 1. Africa intends actively shaping the New Urban Agenda,
More informationADOPTION OF THE EUROCODES IN THE BALKAN REGION
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy ADOPTION OF THE EUROCODES IN THE BALKAN REGION Summary of the questionnaires filled by National Authority relevant
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationThe next frontier SWEDISH LIBRARY ASSOCIATION KENYA LIBRARY ASSOCIATION
The next frontier 2018 2020 SWEDISH LIBRARY ASSOCIATION KENYA LIBRARY ASSOCIATION Swedish Library Association Kenya Library Association, KLA P.O.Box 70380 P.O.Box 46031 107 24 Stockholm 00100 Nairobi Sweden
More informationKEY TO SUSTAINABILITY
KEY TO SUSTAINABILITY AN OVERVIEW OF THE URBAN FIJI Planning for Sustainable Development Conference DEPARTMENT OF TOWN & COUNTRY PLANNING MINISTRY OF LOCAL GOVERNMENT, HOUSING AND ENVIRONMENT 9 TH NOVEMBER,
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More information