Hold-open magnets DORMA

Transcription

1 Hold-open magnets DOA

2 DOA Hold-open magnets A modular system for fire and smoke doors Setting new standards for hold-open magnets DOA s new range of hold-open magnets provides the perfect complement to a technically and aesthetically advanced range of fire and smoke door products. These new market-orientated developments are characterised by their ease of fixing and functional elegance. Plus points for the trade Cost-effective modular system offering the advantages of maximum flexibility with minimal stocking levels. A further component in the DOA range for single-source supply.... for the installer Quick and easy to fix. Sophisticated accessories suitable for a wide range of applications. And thanks to comprehensive quality assurance, they also offer maximum reliability and service life. Quality assured manufacture to DIN ISO 00, EN 00, BS 0. Certified and verified by BSI Quality Assurance Reg. No. Q 6, FM 6... for the specifier/ architect Uniform appearance common to all models. Modular system for application flexibility.... for the user Unobtrusive. Concealed cable run. Optimum holding force with minimum power consumption. Data and features Fixing 00 G 0 G 00 U 0 U 00 A 0 A Surfacemounted Flushmounted Floor mounted ) Holding 00 N force 0 N Anti-remanence pin Test pushbutton Polarity reversal protection Operating v AC/DC voltage 8v DC Power consumption On-load factor. W 0% (rated for continuous service) Class of protection IP 0 ) Ambient temperature 0 0 C Weight (kg) Dimensions Width (mm) Length Depth yes no ) Floor angle bracket required (accessory) ) 00/0 A in conjunction with floor angle bracket: Class of protection IP Hold-open magnets DOA 0 G DOA 00 G DOA 0 U DOA 00 U DOA 0 A DOA 00 A 0 DOA MAG DOA MAW DOA MAT 8 Ø 0 Ø 8 66 Ø Ø 60 Ø Ø s Ø, 60 Ø, 0 Buffer zone, GB

3 Electro-magnets for hold-open systems The statutory regulations which apply in many countries allow fire and smoke doors to be held open for a limited period of time by electro-magnetic hold-open devices which, in the event of a fire, are de-energised to release the door so as to enable automatic closing. Such systems consist of a hold-open device, fire/smoke detection and alarm system, power supply and release device, and generally have to be approved by an accredited institute or building authority (in Germany: the German Institute for Building Technology, Berlin). Electro-magnets are devices which hold open fire and smoke doors. In the event of a fire, the hold-open magnet is deenergised by the release device responding to a signal from the fire detector. The automatic closing action is provided by door closers which, in Germany, must correspond to DIN EN and be third-party verified. It must also be possible to manually release the holdopen device. According to the guidelines for hold-open systems applicable to Germany, a manual release pushbutton is necessary when employing electromagnets in such applications. The pushbutton employed must be red, carry the wording Close door, be located in the immediate vicinity of the door, and must not be hidden when the door is in its hold-open position. 0 V AC ± % 0 V AC ± % MAG Z Z-K MAG MAG HT HT = Electro-magnet HT = Manual release pushbutton MAG = = Smoke detector (ceiling-mounted) Z = Smoke detector (lintel-mounted) Z-K = Smoke detector (lintel-mounted) F Approval certification Electro-magnets of the series DOA 00 for v AC/DC are tested and third-party verified by the Verband der Sachversicherer (VdS) e.v., Cologne (Association of Property Insurers), and have been approved by the German Institute for Building Technology (DIBt), Berlin, for use in combination with the DOA Z smoke detector, the DOA smoke detector and other reputable smoke detector systems, (e.g. with DOA Z /: approval certificate No. Z-6.-). In Germany, inspection and approval of the holdopen system is additionally required., GB

4 DOA Modular system overview 00/0 G for wall or floor mounting* reversal protection for wall or floor mounting* Holding force 00 N Y v AC/DC Generally approved by DIBt-Berlin for use in hold-open systems. (System acceptance inspection may be necessary.) Y 8v DC Make: DOA 00 G reversal protection for wall or floor mounting* Holding force 0 N Y v AC/DC Make: DOA 0 G (*in conjunction with floor angle bracket, see Page 6) 00/0 U for flush fixing reversal protection for flush fixing Holding force 00 N Y v AC/DC Generally approved by DIBt-Berlin for use in hold-open systems. (System acceptance inspection may be necessary.) Y 8v DC Make: DOA 00 U reversal protection for flush fixing Holding force 0 N Y v AC/DC Make: DOA 0 U 00/0 A for wall or floor mounting* with integral test pushbutton reversal protection and integral test pushbutton, for wall or floor mounting* Holding force 00 N Y v AC/DC Generally approved by DIBt-Berlin for use in hold-open systems. (System acceptance inspection may be necessary.) Y 8v DC Make: DOA 00 A reversal protection and integral test pushbutton, for wall or floor mounting* Holding force 0 N Y v AC/DC Make: DOA 0 A (*in conjunction with floor angle bracket, see Page 6), GB

5 MAG MAW MAT, GB

6 DOA Accessories Floor angle bracket 8 00/0 A 00/0 G For installation of hold-open magnets 00/0 G and 00/0 A as floormounted units. A DOA 00/0 B hold-open magnet for floor mounting comprises an 00/0 G or 00/0 A hold-open magnet and an associated floor angle bracket. see Page Adapter frame 00/0 G 00/0 A 6 The frame can be combined with the individual holdopen magnets of the series 00/0 G/U/A. Separate manual release switch 8 HT - UP HT - AP Tür schließen 8 8 UP AP For releasing the hold-open device by hand. When employing electromagnets in hold-open systems for fire and smoke doors, a manual switch may have to be provided in accordance with local or national regulations (e.g. the guidelines of the German Institute for Building Technology (DIBt), Berlin, for German applications). 6, GB

7 Special models 00 H for floor, ceiling and wall mounting, with integral test pushbutton v DC hold-open magnet with pole reversal protection and integral test pushbutton for floor, ceiling and wall mounting. Holding force 0 N. Generally approved by the DIBt-Berlin for use in holdopen systems (in Germany). (System acceptance inspection may be necessary.) Size: Y / mm Y 00/ mm Y 0/ mm Make: DOA 00 H / / / /,, Ø, 0 6 Ø 0 / 00 / 0 Ø 8 Ø, + Z + x Z 6 8 C NC NO HT Junction box by others A fuse by others 0 V AC ± % Z Z Z = x 0, mm HT = x 0, mm = x 0, mm = x 0, mm + Z-K + x HT NC C NO 8 6 V AC Z-K Junction box by others A fuse by others 0 V AC ± % Z-K Z-K Z-K = x 0, mm = x 0, mm HT = x 0, mm = x 0, mm, GB

8 DOA Standard equipment and accessories MAG MAW MAT MAG I Floor Adapter angle frame bracket xx 600 xx 600 xx 600 xx xx 00 G v AC/DC X X X y 60xx y y y # # 8v DC X X X y 60xx y y y # # 00 U v AC/DC X X X y 60xx y y y # 8v DC X X X y 60xx y y y # 00 A v AC/DC X X X y 60xx y y y # # 8v DC X X X y 60xx y y y # # 0 G X X X v AC/DC y 60xx y y y # # 0 U X X X v AC/DC y 60xx y y y 0 A X X X v AC/DC y 60xx y y y # # # 00 H / mm X v DC y 600 y 00/ mm X y 6006 y y 600 y X Separate manual release switch HT-UP 0 HT-AP 0 DOA Door Controls Ltd. DOA Trading Park Staffa Road GB-London E QX Tel Fax hardware@dorma-uk.co.uk DOA Door Controls Ltd., Sandyford Office Park Foxrock IRL-Dublin 8 Tel Fax dormadublin@dorma.com Note: A hold-open magnet for floor mounting comprises an electro-magnet of the type 00/0 G or 00/0 A and the floor angle bracket. DOA Door Controls Pte. Ltd. No., Jalan Terusan, Jurong Singapore 68 Rep. of Singapore Tel Fax DOA Door Controls Pty. Ltd. P.O. Box Narre Warren Vic 80 Abbott Road Hallam Victoria 80 Australia Tel. 006 / 6 Fax 006 / 6 DOA Gulf Door Controls FZE Jebel Ali Free Zone, Roundabout 8, Unit VC 0 P.O. Box 68 Jebel Ali, Dubai United Arab Emirates Tel /8 0 Fax 00 8 /8 0 DOA Door Controls (Pty.) Ltd. Kings Court P.O. Box 88 Southdale South Africa Tel. 00 / Fax 00 /8 0 0 y = Hold open magnet separate X = separate # = Accessory Colour XX white stainless steel finish DOA GmbH + Co. KG P.O. Box Ennepetal Breckerfelder Straße Ennepetal Germany Tel. +(0) / -0 Fax +(0) / The address of a subsidiary/ representation in your area you can find at the DOA-website: WN 0 6, 0/0,, GB,. DD/CtP. 08/0 Subject to change without notice