Ambient Weather RC-8487 ClearView Radio Controlled Travel Alarm Clock with Indoor Temperature User Manual

Transcription

1 Ambient Weather RC-8487 ClearView Radio Controlled Travel Alarm Clock with Indoor Temperature User Manual Table of Contents 1. Introduction Getting Started Display Features Parts List Powering Up Radio Controlled Clock (RCC) Clock Display Settings Daylight Time Zone Settings Time Zone, Time and Date Settings Setting the Alarm Time Using the Alarm and Snooze Functions Alarm Function Snooze Function Automatic Backlight Temperature Units of Measure Manual RCC Synchronization Specifications Measurement Specifications Power Consumption Troubleshooting Guide Liability Disclaimer FCC Statement Warranty Information Introduction Thank you for your purchase of the Ambient Weather RC-8487 ClearView Radio Controlled Travel Alarm Clock with Indoor Temperature. The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest full sized manual and additional troubleshooting tips, please visit: Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 1

2 Figure 1 2. Getting Started 2.1 Display Features Figure 2 No Description No Description 1 ALARM ON/OFF slide switch 7 UP button Slide UP to turn ON alarm In Set mode, press to increase a value. Slide DOWN to turn OFF alarm Press and hold to change value rapidly. 2 SNOOZE/LIGHT button. 8 RESET button Press to turn on the backlight for five Restore to factory default. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 2

3 No Description No Description seconds. When the alarm sounding, press to stop the current alarm and enter snooze mode. 3 LCD Display 9 RCC button Press to switch between Celsius and Fahrenheit. Press and hold for 3 seconds to force the Radio Controlled Clock search. 4 DOWN button 10 Auto Night-Light Slide Switch In Set mode, press to decrease a value. Slide to ON position to activate night-light function. The backlight Press and hold to decrease a value rapidly. will automatically turn on or off based on light sensor. The brightness of night-light is weaker than normal backlight. Slide to OFF position to turn off the 5 CLOCK SET button In normal time mode, press and hold for two seconds to enter Time set mode. In Time set mode, press to step to the next setting, or press and hold for two seconds to save the settings and return to normal time mode. 6 ALARM button In normal time mode, press and hold for two seconds to enter alarm time setting mode. night-light feature. 11 Battery compartment. Accommodates 2 x AA batteries. In Set mode, press to save exit Set mode. 2.2 Parts List QTY Item 1 Clock Frame Dimensions (LxWxH): 3.8" L x 3.5"H x 1.3"D 1 User Manual 2.3 Powering Up 1. Remove the battery door on the back of the clock and insert 2 new AA batteries, according to the polarity information marked on the battery compartment, and replace the battery door. 2. Once the batteries are inserted, all of the LCD segments will light up briefly before entering the radio controlled clock (RCC) reception mode. 3. The radio controlled clock (RCC) will initially power up with time showing 2:00 am. For the next six (6) minutes it will attempt to synchronize time with the short wave transmitter in Fort Collins, CO., USA. If unsuccessful, the RCC will search for the short wave signal at 2 am, 8 am, 2 pm and 8 pm. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 3

4 Note: If no display is present after powering up the clock, press the reset button on the back of the clock with an open ended paper clip or sharp tool Radio Controlled Clock (RCC) Eight seconds after power up, the clock begin radio controlled clock (RCC) reception and the RCC search icon every two hours. will turn on. The RCC will continue to search for six minutes. It will try again RCC Icon Description RCC Icon Description No signal Acceptable signal Weak signal (flashes between two icons). Cannot be interpreted. Figure 3 Excellent signal If the time is incorrect by increments of an hour, or does not change on your radio controlled clock (RCC): 1. Be patient. Wait at least one week before contacting Ambient Weather. The RCC is a shortwave signal originating near Fort Collins, Colorado, and travels thousands of miles by bouncing off the ionosphere. The signal is better at night due to solar interference during the daytime. The farther you are from Colorado, the weaker the signal. Urban environments can also affect the signal strength. 2. Locate the Clock at night near a window or outer wall, and away from other radiating sources, like wireless routers or TVs. This will insure the best reception possible. 3. If the batteries in the clock are drained or low on power, replace them. Low batteries are often a cause of weak reception. 4. Check your Time Zone Setting. Make sure your time zone is set properly in the clock settings. 5. Avoid placing the clock on a solid metal plate. 6. Avoid closed in areas. Closed in areas such as airports, basements, or industrial buildings are not recommended. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 4

5 3. Clock Display Normal Mode Alarm Mode No Description No Description 1 Normal Time 10 Alarm time 2 AM/PM 11 Alarm AM/PM 3 Date 12 Alarm On / Snooze 4 Month 13 Alarm mode 5 Day of the week 6 Indoor temperature 7 RCC Signal strength indication 8 Daylight savings time 9 Time zone (PST, MST, CST or EST) Figure 4 4. Settings 4.1 Daylight Time Zone Settings The clock has been programmed to automatically switch when daylight saving time is in effect. Your clock will display DST. Note: Arizona does not observe daylight savings time. If you live in Arizona and DST is in effect, you will need to change your time zone to P for Pacific. 4.2 Time Zone, Time and Date Settings Operation While in Normal Time Mode, Press and Hold the CLOCK button for two seconds to enter the time zone, time and date settings mode. Display The Time Zone icon will flash. Press the up arrow key to adjust between Pacific (PST), Mountain (MST), Central (CST) and Eastern (EST). Note: Only proceed if you want to manually set the date, time or time format. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 5

6 Press the CLOCK key again (do not hold). The year will flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Press the CLOCK key again (do not hold) and the month will flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Press the CLOCK key again (do not hold) and the day will flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Press the CLOCK key again (do not hold) and the 12 Hour Format (AM/PM) will flash. Press the up arrow key to change between 12 hour and 24 hour format. Press the CLOCK key again (do not hold) and the hour flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 6

7 Press the CLOCK key again (do not hold) and the minute flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Press the CLOCK key again (do not hold) and the second flash. Press the up arrow key to reset to 00 seconds. Press the CLOCK key again (do not hold) and the language will flash. Press the up arrow key to change between GB (English), FR (French), DE (German), ES (Spanish) and IT (Italian). Press the CLOCK key to save and exit the time and date settings mode. Figure Setting the Alarm Time Operation While in Normal Time Mode, Press and Hold the ALARM key for two seconds to enter the alarm settings mode. Display The alarm hour will flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 7

8 Press the ALARM key again (do not hold) and the alarm minute flash. Press the up arrow key to increase. Press the down arrow key to decrease. Press and hold to increase or decrease rapidly. Press the ALARM key to save and exit the alarm time settings mode. 4.4 Using the Alarm and Snooze Functions Alarm Function Set the alarm time as described in Section 4.3. Slide the ALARM ON/OFF switch to the ON position. The alarm icon will appear on the display.. Slide the ALARM ON/OFF switch to the OFF position to turn off the alarm Snooze Function When the alarm is sounding, the alarm will beep for one minute if no keys are pressed, and it will sound again the next day. Press the SNOOZE/LIGHT key to snooze and the alarm icon will flash. With the bell icon flashing, the crescendo alarm will sound four times every 5 minutes. The alarm will beep for one minute if no keys are pressed, and it will sound again the next day. 4.5 Automatic Backlight The backlight will automatically turn on in low light conditions using a light sensor on the top of the clock. Slide the LIGHT ON/OFF switch to ON position, and the backlight will turn on in low light conditions. Slide the LIGHT ON/OFF switch to OFF position to turn off all of the time. 4.6 Temperature Units of Measure To change the temperature units of measure between F and C, press the RCC button. 4.7 Manual RCC Synchronization To manually search for the Radio Controlled Clock signal, press and hold the REC key. The RCC search icon will turn on. The RCC will continue to search for six minutes. 5. Specifications 5.1 Measurement Specifications The following table provides specifications for the measured parameters. Measurement Range Accuracy Resolution Indoor Temperature 32 to 140 F ± 2 F 0.1 F Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 8

9 5.2 Power Consumption Clock: 2 x AA Alkaline batteries recommended. 6. Troubleshooting Guide If your question is not answered here, you can contact us as follows: 1. Support: support@ambientweather.com 2. Technical Support: (M-F 8am to 4pm Arizona Time) Problem Radio controlled clock does not update. The clock is off by increments of an hour. The clock does not respond to commands. Solution Reference Section Radio Controlled Clock (RCC) Check your Time Zone Setting. Make sure your time zone is set properly in the clock settings. Press the reset button on the back of the clock with an open ended paper clip or sharp tool. 7. Liability Disclaimer Please help in the preservation of the environment and return used batteries to an authorized depot. The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment. Reading the User manual is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. The specifications of this product may change without prior notice. This product is not a toy. Keep out of the reach of children. No part of this manual may be reproduced without written authorization of the manufacturer. Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. 8. FCC Statement Statement according to FCC part 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 9

10 Statement according to FCC part : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. 9. Warranty Information Ambient, LLC provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and only to the original purchaser of this product. To receive warranty service, the purchaser must contact Ambient, LLC for problem determination and service procedures. Warranty service can only be performed by a Ambient, LLC. The original dated bill of sale must be presented upon request as proof of purchase to Ambient, LLC. Your Ambient, LLC warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (lack of reasonable and necessary maintenance); (2) damage resulting from failure to follow instructions contained in your owner s manual; (3) damage resulting from the performance of repairs or alterations by someone other than an authorized Ambient, LLC authorized service center; (4) units used for other than home use (5) applications and uses that this product was not intended (6) the products inability to receive a signal due to any source of interference or metal obstructions and (7) extreme acts of nature, such as lightning strikes or floods. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. Version 1.0 Copyright 2017, Ambient LLC. All Rights Reserved. Page 10