by Honeywell MS-9050UD(E) FireuTeALarms Fire Alarm Control Panel with DACT NOTIFICATION APPLIANCE CIRCUITS (NACS)

Transcription

1 MS-9050UD(E) Fire Alarm Control Panel with DACT DF-52418:E1 A1-20 FireuTeALarms by Honeywell Addressable General The Fire«Lite MS-9050UD(E) is a Fire Alarm Control Panel (FACP) and Digital Alarm Communicator/Transmitter (DACT) combined into one circuit board. This compact, intelligent addressable control panel supports up to 50 addressable devices of any type of detectors and modules. With an exten sive list of powerful features, the MS-9050UD programs just like Fire«Lite's larger products, yet fits into applications previously served only by conventional panels. The MS-9050UD's integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the pub lic switched telephone network. It also allows remote and local programming of the control panel using the PK-CD Upload/ Download utility. In addition, the control panel may be pro grammed or interrogated off-site via the public switched tele phone network. Any personal computer with Windows'" 95 or greater, and compatible modem with a speed of 14.4 kbps or faster and Fire-Lite Upload/Download software kit PK-CD, may serve as a Service Terminal. This allows download of the entire program or upload of the entire program, history file, walk-test data, current status and system voltages. The power supply and all electronics are contained on a single circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polarity/city box transmitter. (4XTMF) New options include a UL listed printer, PRN-6F and the new IPDACT Internet Monitoring module.the FireWatch Series inter net monitoring modules IPDACT-2 and IPDACT-2UD permit monitoring of alarm signals over the Internet, saving the monthly cost of two telephone lines. Although not required, the second ary telephone line may be retained providing backup communi cation over the public switched telephone line. NOTE: Unless otherwise specified, the term MS-9050UD is used in this data sheet to refer to both the MS-9050UD and the MS- 9050UDE FACPs. For MS-9050UDC, refer to DF Features Listed to UL Standard 864, 9th edition. Auto-program (learn mode) reduces installation time. Reports two devices set to the same address. On-board DACT. Two independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits. Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices. Remote Acknowledge, Silence, Reset and Drill via address able monitor modules. Two programmable relays and one fixed trouble relay. Built-in Programmer. Telephone Line Active LEDs. EIA-232 PC interface. Integral 80-character LCD display with backlighting. Real-time clock/calendar with control. History file with 500 event capacity. automatic daylight savings Automatic detector sensitivity testing (NFPA 72 compliant). Automatic device type-code verification. Point trouble identification. Waterflow selection per module point. Alarm verification selection per detector point. Maintenance alert warns when smoke detector dust accumu lation is excessive. One-person audible or silent walk test with walk-test log and printout. System alarm verification selection per detector point. PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant). Up to eight ANN-BUS annunciators Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator. Upload/Download (local or remote) of program and data via integral DACT. SLC COMMUNICATION LOOP Single addressable SLC loop which meets NFPA Style 4, 6 and 7 requirements. 50 addressable device capacity (any combination of address able detectors and modules). Compatible with Fire»Lite's addressable devices (refer to SLC Wiring Manual). NOTIFICATION APPLIANCE CIRCUITS (NACS) Two independently programmable output circuits. Circuits can be configured for the following outputs: - Style Y (Class B) - Style Z (Class A) - Door Holder Service (cannot be used for notificationappliances) - Aux Power Source (cannot be used for notificationappliances) Silence Inhibit and Autosilence timer options. Continuous, March Time, Temporal or California code for main circuit board NACs with two-stage capability. Selectable strobe synchronization per NAC. 2.5 A total power for NACs. NOTE: Maximum or total 24VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A. DF-52418:E1 1/27/12 Page 1 of 4

2 PROGRAMMING AND SOFTWARE Autoprogram (learn mode) reduces installation time. Custom English labels (per point) may be manually entered or selected from an internal library file. Two programmable Form-C relay outputs. 20 software zones. Continuous fire protection during online programming at the front panel. Program Check automatically catches common errors not linked to any zone or input point. OFFLINE PROGRAMMING: Create the entire program in your office using a Windows -based software package(order programming kit PK-CD, containing PS-Tools, separately). Upload/download system programming locally. User interface LED INDICATORS AC Power (green) Fire Alarm (red) Supervisory (yellow) Trouble (yellow) Alarm Silenced signals (yellow) KEYPAD 16 key alpha-numeric pad Acknowledge/Step Alarm Silenced Drill (Manual Evacuate) Reset (lamp test) MMF-300 Monitor Module MMF Wire Detector Monitor Module I " D355PL Duct Detector BG-12LXAddressable Manual Pull Station Multi-Modules CRF Six-Relay Control Module CMF Six-Circuit Supervised Control Module MMF Six-Zone Interface Module MMF Ten-Input Monitor Module Beam Detector BEAM-335AS) MS-9050UD ADDRESSABLE FIRE ALARM CONTROL PANEL Product Line Information MS-9050UD(E): Combination DACT/Fire Alarm Control Panel with one SLC loop. Includes main circuit board with display, chassis with transformer, backbox with door, plastic bag contain ing screws, cables, key, etc., manual. (For MS-9050UDC, refer to DF ) PK-CD: Contains PS-Tools programming software for Windows -based PC computer (cable not included). DP-51050: Optional dress panel for the MS-9050UD. TR-CE: Optional trim ring for semi-flush mounting. BB-2F: Optional cabinet for one or two modules. BB-6F: Optional cabinet for up to six modules mounted on CHS-6 chassis. BB-26: Battery backbox, holds up to two 25 AH batteries and CHG-75. BB-55F: Battery box, houses two 55 AH batteries CHS-6: Chassis, mounts up to six multi-modules in a cabinet. BB-6F CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH. CHG-120F: Remote battery charging system for lead-acid bat teries with a rating of 55 to 120 AH. Requires additional BB-55F for mounting. BAT Series: Batteries, see data sheet DF PRT/PK-CABLE: Cable printer/personal computer interface cable. PRN-6F: paper. UL listed compatible event printer. Uses tractor-fed IPDACT, IPDACT-2/2UD Internet Monitoring Module: Mounts in bottom of enclosure with optional mounting kit (PN IPBRKT). Connects to primary and secondary DACT telephone output ports for internet communications over customer provided ether- Page 2 of 4 DF-52418:E1 1/27/12

3 net internet connection. Requires compatible Teldat Visoralarm Central Station Receiver. Can use DHCP or static IP. (See data sheet df formore information.) IPBRKT: Mounting kit for IPDACT-2/2UD in common enclosure. IPSPLT: Y-adaptor option allows connection of both panel dialer outputs to one IPDACT-2/2UD cable input. AC-TRMBLK: AC Terminal Block mounts to a metal bracket, in turn, mounts to the FACP chassis. Use AC-TRMBLK when wire nuts are not allowed for AC connections to the transformer. OPTIONAL MODULES 4XTMF Reverse Polarity Transmitter Module: Provides a supervised output for local energy municipal box transmitter, alarm and trouble. Includes a disable switch and disable trouble LED. ANN-SEC: Optional secondary ANN-BUS interface module. Note: Used only with firmware 3.0 or higher. COMPATIBLE ANNUNCIATORS ANN-80(-W): Remote LCD annunciator mimics the information displayed on the FACP LCD display. Recommended wire type is un-shielded. (Basic model is red; order -W version for white; see DF ) ANN-I/O: LED Driver Module provides connections to a user supplied graphic annunciator. (See DF ) ANN-LED: Annunciator Module provides three LEDs for each zone: Alarm, Trouble, and Supervisory. Ships with red enclo sure. (See DF ) ANN-RLED: Provides alarm (red) indicators for up to 30 input zones or addressable points. (See DF ) ANN-RLY: Relay Module provides 10 programmable Form-C relays. Can be mounted inside the cabinet. (See DF ) ANN-S/PG: Serial/Parallel Printer Gateway module provides a connection for a serial or parallel printer. (See DF ) ADDRESSABLE DEVICES All feature a polling LED and rotary switches foraddressing. CP355: Addressable low-profile ionization smoke detector. SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector with thermal sensor. SD355R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. H355: Fast-response, low-profile heat detector. H355R: Fast-response, low-profile heat detector with rate-ofrise option. H355HT: Fast-response, low-profile heat detector that activates at190 F/88 C. AD355: Low-profile, intelligent, "Adapt" multi-sensor detector (B350LP base included). BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sen sitivity test. D355PL: InnovairFlex low-flow non-relay duct-detector housing; includes SD355R. DNR: InnovairFlex low-flow non-relay duct-detector housing. (Order SD355R separately.) DNRW: InnovairFlex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order SD355R separately.) MMF-300: Addressable Monitor Module for one zone of nor mally-open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Module may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it provides two Style B (Class B) only IDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox. MMF-302A: Similar to MMF-300A. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Docu ment for listed compatible devices and quantity limitation. CMF-300: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0" (10.16 cm.) electrical box. Notification Appliance Circuit option requires external 24 VDC to power noti fication appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-12LX: Addressable manual pull station with interface mod ule mounted inside. I300: This module isolates the SLC loop from short circuit condi tions (required for Style 6 or 7 operation). SMB500: Used to mount all modules except the MMF-301 and M301. MMF : Ten-input monitor module. Mount one or two mod ules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. MMF-302-6: Six-zone interface module. Mount one or two mod ules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CMF-300-6: Six-circuit supervised control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six mod ules on a CHS-6 chassis in a BB-6F cabinet. CRF-300-6: Six-relay control module (Form-C relays). Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. NOTE: For more information on Compatible Addressable Devices for use with the MS-9050UD, see the following data sheets (docu ment numbers): AD355 (DF-52386), BG-12LX (DF-52013), CMF (DF-52365), CRF (DF-52374), CMF/CRFSeries (DF ), CP355 (DF-52383), H355 Series (DF-52385), 1300 (DF ), MMF-300 Series/MDF-300 (DF-52121), MMF (DF-52347), MMF (DF-52356), SD355/SD355T (DF ). ADDRESSABLE DEVICE ACCESSORIES End-of-Line Resistor Assembly (R-47K and R-3.9K): The 47k ohm assembly supervises the MMF-300, MDF-300, MMF- 301, and CMF-300 module circuits. The 3.9k ohm assembly supervises the MMF-302 module circuit. These resistors are included with each module. Power Supervision Relay: Supervises the power to 4-wire smoke detectors and notification appliances. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interference. Refer to the panel manual for wiring details. DF-52418:E1 1/27/12 Page 3 of 4

4 SYSTEM SPECIFICATIONS IKJJUBSaCaBJgBCT ^i^m^:^euttfwvwm^^w^ti«www^m^>^a^ubapkggr ^kkfcuj^l^.j^.^,^0^^ System Capacity Intelligent Signalling Line Circuits 1 Addressable device capacity 50 Programmable software zones 20 Annunciators 8 Electrical Specifications AC Power: MS-9050UD 120 VAC, 60 Hz. 3.0 A. MS-9050UDE: 240 VAC, 50 Hz. 1.5 A. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Nonpower-limited, supervised. Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (MS-9050UD cabinet holds maximum of two 18 AH batteries.) Communication Loop: Supervised and power-limited. Notification Appliance Circuits: Terminal Block provides con nections for two NACs. Style Y (Class B) or Style Z (Class A). Special Application power. Power-limited, supervised circuitry. Maximum signaling current per circuit: 2.5 A. End-of-Line Resis tor: 4.7k ohm. Vz watt (P/N UL listed) for Style Y (Class B) NAC. Refer to the Fire»Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Contact rating: VDC (resistive), VAC (resistive). Form-C relays, nonpower-limited, nonsupervised. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72" (1.82 cm.) deep. Backbox: 19.00* (48.26 cm.) high x 16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00* (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00" (50.80 cm.) high x 22.5" (57.15 cm.) wide x 8.5" (21.59 cm.) deep. This system meets NFPA requirements for operation at 0-49 C/ F and at a relative humidity 93% ± 2% RH (noncondensing) at 32 C ± 2 C (90 F ± 3 F). However, the useful life of the system's standby batteries and the electronic compo nents may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of C/60-80 F. NFPA Standards The MS-9050UD(E) complies with the following NFPA 72 Fire Alarm Systems requirements: - LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervisory). -AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTMF). -REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervisory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) - PROPRIETARY (Automatic, Manual and Waterflow). - CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised). - OT, PSDN (Other Technologies, Packet-switched Data Net work) Agency Listings and Approvals The listings and approvals below apply to the basic MS- 9050UD(E) control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL: S624 FM approved CSFM: :210 MEA: E NOTE: See DF for ULC-listed model. Temperature and Humidity Ranges FireLite Alarms and System Sensor are registered trademarks of Honeywell International Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation by Honeywell International Inc. Allrights reserved. Unauthorized use of this document is strictly prohibited. ISO 9001 rmttbijttsmamfltminb QUALITY SYSTEMS This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire*Lite Alarms. Phone: (800) , FAX: (877) Made in the U.S. A. Page 4 of 4 DF-52418:E1 1/27/12

5 df-52417:c«b-90 ANN Character LCD Serial Annunciator FireuTeALarms by Honeywell Annunciators General The ANN-80 annunciator is a compact, backiit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced condi tions. The ANN-80 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80 is red; for white, order ANN-80-W. The ANN-80 displays English-language text of system point information including device type, zone, independent point alarm, trouble or supervisory status, as well as any custom alpha labels programmed into the control panel. It includes con trol switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) Up to eight ANN-80s may be connected to the ANN-BUS of each FACP. No programming is required, which saves time dur ing system commissioning. Features Listed to UL Standard 864, 9th Edition. Backiit 80-character LCD display (20 characters x 4 lines). Mimics all display information from the host panel. Control switches for System Acknowledge, Signal Silence, Drill, and Reset. Control switches can be independently enabled or disabled at the FACP. Keyswitch enables/disables control switches and mechani cally locks annunciator enclosure Keyswitch can be enabled or disabled at the FACP. Enclosure supervised for tamper. System status LEDs for AC Power, Alarm, Trouble, Supervi sory, and Alarm Silence. Local sounder can be enabled or disabled at the FACP. ANN-80 connects to the ANN-BUS terminal on the FACP and requires minimal panel programming. Displays device type identifiers, individual point alarm, trou ble, supervisory, zone, and custom alpha labels. Time-and date display field. Surface mount directly to wall or to single, double, or 4" square electrical box. Semi-flush mount to single, double, or 4" square electrical box. Use ANN-SB80KIT for angled view mounting. Can be remotely located up to 6,000 feet (1,800 m) from the panel. Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs. May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC). Up to eight ANN-80S can be connected on the ANN-BUS. Controls and Indicators AC Power Alarm Trouble Supervisory Alarm Silenced Specifications Operating voltage range: 18 VDC to 28 VDC. Current 24 VDC nominal (filtered and nonresettable): 40 ma maximum. Ambient temperature: 32 F to 120 F (0 C to 49 C). Relative humidity: 93% ± 2% RH (noncondensing) at 32 C ± 2 C (90 F ± 3 F) " (13.65 cm.) high x 6.875" (17.46 cm.) wide x 1.375" (3.49 cm.) deep. For use indoors in a dry location. All connections are power-limited and supervised. Agency Listings and Approvals The listings and approvals below apply to the ANN-80. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL: S2424 FM approved CSFM: :211 MEA: E The ANN-BUS POWERING THE DEVICES ON THE ANN-BUS FROM AUXILIARY POWER SUPPLY The ANN-BUS can be powered by an auxiliary power supply when the maximum number of ANN-BUS devices exceeds the ANN-BUS power requirements. See the FACP manual for more information. df-52417:c 05/22/09 Page 1 of 2

6 ANN-BUS DEVICE ADDRESSING Each ANN-BUS device requires a unique address (ID Number) in order to communicate with the FACP. A maximum of 8 devices can be connected to the FACP ANN-BUS communication circuit. See the FACP manual for more information. WIRE REQUIREMENTS: COMMUNICATIONS CIRCUIT The ANN-80 connects to the FACP ANN-BUS communications circuit. To determine the type of wire and the maximum wiring distance that can be used with FACP ANN-BUS accessory mod ules, it is necessary to calculate the total worst case current draw for all modules on a single 4-conductor bus. The total worst case current draw is calculated by adding the individual worst case currents for each module. NOTE: For total worst case current draw on a single ANN-BUS refer to appropriate FACP manual. After calculating the total worst case current draw, the following table specifies the maximum distance the modules can be located from the FACP on a single wire run. The table ensures 6.0 volts of line drop maximum. In general, the wire length is lim ited by resistance, but for heavier wire gauges, capacitance is the limiting factor. These cases are marked in the chart with an asterisk (*). Maxi mum length can never be more than 6,000 feet (1,800 m), regardless of gauge used. See table below. WIRE REQUIREMENTS: POWER CIRCUIT 14 to 18 AWG ( mm2) wire for 24 VDC power cir cuit is acceptable. Power wire distance limitation is set by 1.2 volt maximum line drop form source to end of circuit. All connections are power-limited and supervised. A maximum of eight ANN-80 modules may be connected to this circuit. Communication Pair Wiring Distance: FACP to Last ANN-BUS Module Total Worst Case Current Draw (amps) 22 Gauge 18 Gauge 16 Gauge 14 Gauge ft. 4,688 ft. ' 6,000 ft. "6,000 ft ft. 2,344 ft. 3,731 ft. 5,906 ft ft. 1,563 ft ft. 3,937 ft ft. 1,172 ft. 1,866 ft ft ft. 938 ft ft. 2,362 ft ft. 781 ft. 1,244 ft. 1,969ft ft. 670 ft. 1,066 ft. 1,687 ft ft. 586 ft. 933 ft. 1,476 ft ft. 521 ft. 829 ft. 1,312ft (max.) 185 ft. 469 ft. 746 ft. 1,181 ft. WIRING CONFIGURATION The following figure illustrates the wiring between the FACP and ANN-BUS devices. ANN-BUS and power wiring are supervised and power-limited. ORDERING OPTIONS: ANN-80: Red 80 character LCD Annunciator. ANN-80-W: White, 80 character LCD Annunciator. ANN-SB80KIT-R: Red surface mount backbox with angled wedge. ANN-SB80KIT-W: White surface mount backbox with angled wedge. MS-9050UD tb FACP Wiring to ANN-BUS Device FireLite Alarms is a registered trademark of Honeywell International Inc by Honeywell International Inc. All rights reserved. Unauthorized use ol this document is strictly prohibited. ISO 9001 MMJNI 1-1 ENEINIFFJN" 8 MANUFMTURIN6 QUALITY SYSTEMS This document is not intended to be used lor installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire«Lite Alarms. Phone: (800) , FAX: (877) Made in the U.S. A. Page 2 ol 2 df-52417:c 05/22/09

7 BG-12LX Addressable Manual Pull Station DF-52013:D«E-100 Fire LueAlarms by Honeywell Addressable Devices General The Fire-Lite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire-Lite's addressable fire alarm control panels (FACPs) Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features Maintenance personnel can open station for inspection and address setting without causing an alarm condition. Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. Handle latches in down position and the word "ACTIVATED" appears to clearly indicate the station has been operated. Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm3 wire). Can be surface mounted (with SB-10 or SB-I/O) or semiflush mounted. Semi-flush mount to a standard singlegang, double-gang, or 4" (10.16 cm) square electrical box. Smooth dual-action design. Meets ADAAG controls and operating mechanisms guide lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force. Highly visible. Attractive shape and textured finish. Key reset. Includes Braille text on station handle. Optional trim ring (BG12TR). Meets UL 38, Standard for Manually Actuated Signaling Boxes. Construction Shell, door, and handle are molded of durable polycarbonate material with a textured finish. Specifications Shipping Weight: 9.6 oz. ( g) Normal operating voltage: 24 VDC. Maximum SLC loop voltage: 28.0 VDC. Maximum SLC standby current: 375 pa. Maximum SLC alarm current: 5 ma. Temperature Range: 32 F to 120 F (0 C to 49 C) Relative Humidity: 10% to 93% (noncondensing) For use indoors in a dry location Installation The BG-12LX will mount semi-flush into a single-gang, doublegang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB-10 or SB-I/O surface backbox. If the BG-12LX is being semi-flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi-flush mounting with 4" (10.16 cm) or double-gang boxes (not with single-gang boxes). Operation Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word "ACTI VATED" (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; clos ing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. Two rotary decimal switches allow address settings (1-159 with Breakaway Tab removed for MS-9600 Series, 1-99 and MS-9200UDLS, 1-50 for MS-9050UD). Architectural/Engineering Specifications Manual Fire Alarm Stations shall be non-coded, with a keyoperated reset lock in order that they may be tested, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of red-colored polycarbonate material with clearly visible operat ing instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB-10 or SB-I/O; or semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box, and shall be installed DF-52013:D 4/13/2012 Page 1 of 2

8 within the limits defined by the Americans with Disabilities Act (ADA) or per national/local requirements. Manual Stations shall be Underwriters Laboratories listed. Manual stations shall connect with two wires to one of the con trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. Product Line Information BG-12LX: Dual-action addressable pull station. Includes key locking feature. (Listed for Canadian and non-canadian appli cations.) SB-10: Surface backbox; metal. SB-I/O: Surface backbox; plastic. BG12TR: Optional trim ring : Keys, set of two. Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro cess. Consult factory for latest listing status. UL/ULC Listed: S711 (listed for Canadian and non-cana dian applications). MEA:67-02-E. CSFM: :0184. FM Approved. Patented: U.S. Patent No. D ; 6,380,846; 6,314,772; 6,632,108. HreLite Alarms is a registered trademark of Honeywell International Inc by Honeywell International Inc. Allrights reserved. Unauthorized use of this document is strictly prohibited. ***»#%^ This document is not intended tobe used for installation purposes. I ill m^i'^- li We try to keep out product information up-to-date and accurate. If«4 I; I J I J I =173 Wecannotcover all specific applications or anticipate all requirements. EflBNEEIINB &MWIFMTIRING All specifications are subject to change without notice. QUALITY SYSTEMS For more information, contact Fire«LiteAlarms. Phone: (800) , FAX: (877) MademtheU.S.A. Page 2 of 2 DF-52013:D 4/13/2012

9 CRF-300(A) Relay Module df-60379:a1 E-400 &) Fire LueALarms by Honeywell Addressable Devices General The CRF-300(A) Addressable Relay Module provides the sys tem with a dry-contact output for activating a variety of auxil iary devices, such as fans, door holders, dampers, control equipment, etc. Addressability allows the dry contact to be activated through panel programming, on a select basis. LiteSpeed is a communication protocol developed by Fire»Lite Engineering that greatly enhances the speed of com munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. Features Built-in type identification automatically identifies these devices to the control panel. Internal circuitry and relay powered directly by two-wire SLC loop. Integral LED "blinks" green each time a communication is received from the control panel and turns on in steady red when activated. High noise immunity (EMF/RFI). Wide viewing angle of LED. SEMS screws with clamping plates for wiring ease. Direct-dial entry of address: for MS-9600(A) series panels, on MS-9200UDLS(A) and MS-9050UD(A). Applications The CRF-300(A) may be programmed to operate dry contacts for door holders, Air Handling Unit shutdown, etc., and to reset four-wire smoke detector power. Construction The face plate is made of off-white heat-resistant plastic. Controls include two rotary switches for direct-dial entry of address setting. The CRF-300(A) is configured for a single Class B (Style Y) or Class A (Style Z) Notification Appliance Circuit. The CRF-300(A) provides two Form-C dry contacts that switch together. Operation Each CRF-300(A) uses one of the addresses on a SLC loop. It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit (NAC). The LED blinks with each poll received. On command, it activates its internal relay. NOTE: Open/short supervision is suspended withthe CRF-300. Rotary switches set a unique address for each module. The address may be set before or after mounting. The built-in TYPE CODE (not settable) will identify the module to the con trol panel, so as to differentiate between a control module and a relay module. Specifications CRF-300(A) Normal operating voltage: 15 to 32 VDC. Maximum SLC current draw: 6.5 ma (LED on). Average operating current: 230 pa direct poll (CLIP mode), 255 pa group poll (LiteSpeed mode) with LED flashing. EOL resistance: not used. Temperature range: 32 F to 120 F (0 C to 49 C). Humidity range: 10% to 93% non-condensing. Dimensions: 4.5* (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125* (5.398 mm) deep box. Relay Contact Ratings Load Description Application Maximum Voltage Current Rating Resistive Non-Coded 30 VDC 3.0 A Resistive Coded 30 VDC 2.0 A Resistive Non-Coded 110 VDC 0.9 A Resistive Non-Coded 125 VAC 0.9 A Inductive (L/R=5ms) Coded 30 VDC 0.5 A Inductive (L/R=2ms) Coded 30 VDC 1.0A Inductive (PF=0.35) Non-Coded 125 VAC 0.5 A df-60379:a1 08/04/09 Page 1 of 2

10 Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac tory for latest listing status. UL: S2424 ULC: S2424 FM approved CSFM: :185 MEA:72-01-E Product Line Information CRF-300(A): Intelligent addressable relay module. : Intelligent addressable relay module, ULC listed model. SMB500: Optional surface-mount backbox. NOTE: For installation instructions, see document and refer to the SLC Wiring Manual, document LiteSpeed is a trademark and FircLite Alarms is a registered trademark ol Honeywell International Inc by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Mg*ffe AAA4 ^h's document is not intended to be used for installation purposes. I j III yiljili i We try to keep oui product information up-to-date and accurate. ff.g * ;V J I J I =4T1 We cannot cover all specific applications or anticipate all requirements. ffleinibins 8 MflMIFACTDRINC Allspecifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. Page 2 of 2 df-60379:a1 08/04/09 For more information, contact Fire-Lite Alarms. Phone: (800) , FAX: (877)

11 D355PL(A)/DNRW InnovairFlex Intelligent Non-Relay Photoelectric Duct Smoke Detector DF-60430:C2 E-650 FireuTeALarms by Honeywell Intelligent Addressable Devices General The Fire-Lite InnovairFlex D355PL(A) intelligent non-relay photoelectric duct smoke detector and DNRW watertight nonrelay photoelectric duct smoke detector feature a pivoting housing that fits both square and rectangular footprints capa ble of mounting to a round or rectangular duct. DNRW duct smoke detector, with its NEMA-4 rating, is listed as a watertight, UV resistant enclosure providing protection against falling dirt, rain, and windblown dust, splashing and hose directed water, allowing operators to use the detector in the most extreme environments. These units sense smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute (0.5 to m/s), temperatures of -4 F to 158 F (-20 C to 70 C), and a humidity range of 0 to 95 percent (non-condensing.) An improved cover design isolates the sensor head, which allows for ease of maintenance. A cover tamper feature indi cates a trouble signal for a removed or improperly installed sensor cover. The Fire-Lite InnovairFlex housing provides a 3/ 4-inch conduit knockout and ample space to facilitate easy wir ing and mounting of a relay module. The Fire-Lite InnovairFlex duct smoke detector can be custom ized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories. Features Photoelectric, integrated low-flow technology. Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to m/s). Versatile mounting options: square or rectangular configu ration. Broad ranges for operating temperature (-4 F to 158 F, - 20 C to 70 C) and humidity (0% to 95% non-condensing). Patented sampling tube installs from front or back of the detector with no tools required. Cover tamper signal. Increased wiring space with a newly added 3/4" conduit knockout. Available space within housing to accommodate mounting of a relay module. Easily accessible code wheels on sensor head (sold sepa rately). Clear cover for convenient visual inspection. Remote testing capability. Requires com line power only. Accommodates the installation of an addressable relay module, sold separately, (CRF-300) for applications requir ing a Form-C relay. Specifications Size: (Rectangle) in (37 cm) Length; 5 in (12.7 cm) Width, 2.5 in (6.6 cm) Depth. Size: (Square) 7.75 in (19.7 cm) Length; 9 in (22.9 cm) Width; 2.5 in (6.35 cm) Depth. Weight: 1.6 lb (0.73 kg). Operating Temperature Range: -4 F to 158 F (-20 C to 70 C). Storage Temperature Range: -22GF to 158 F (-30 C to 70 C). Operating Humidity Range: 0% to 95% relative humidity (non-condensing). Air Duct Velocity: 100 to 4,000 ft/min (0.5 to m/s). Accessories Fire-Lite provides system flexibility with a variety of accesso ries, including two remote test stations and different means of visible and audible system annunciation. As with our duct smoke detectors, all duct smoke detectors accessories are UL listed. D355PLs and DNRWs with a date code of 0013 or higher do not require external 24VDC for remote test applications when used with a remote-test-capable detector. ACCESSORY CURRENT LOADS AT 24 VDC Device Standby Alarm RA100Z 0mA 12 ma Max RTS151/ RTS151KEY 0mA 12mA Max Agency Listings and Approvals Consult product manual for lists of compatible UL-Listed devices. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Con sult factory for latest listing status. UL:S1059. ULC: S1059 DF-60430:C2 12/18/2012 Page 1 of 2

12 CSFM: :0209. FM approved. Product Line Information D355PL: Intelligent non-relay photoelectric low flow smoke detector housing. Includes SD355R Detector. DNRW: Watertight intelligent non-relay photoelectric low flow duct smoke detector housing. Does not include detector head. SD355R(A): Remote test capable addressable low-profile photoelectric smoke detector. SD355(A): Addressable low-profile photoelectric smoke detec tor. DCOIL: Remote test coil. Required for older DNR(W) duct detector housing. DST1: Metal sampling tube duct width up to 1 ft (0.3m). DST1.5: Metal sampling tube duct widths up to 1 ft to 2 ft (0.3 to 0.6 m). DST3: Metal sampling tube duct widths up to 2 ft to 4 ft (0.6 to 1.2 m). DST5: Metal sampling tube duct widths up to 4 ft to 8 ft (1.2 to 2.4 m). DST10: Metal sampling tube duct widths up to 8 ft to 12 ft (2.4 to 3.7 m). DH400OE-1: Weatherproof enclosure. ETX: Metal exhaust tube duct, width 1 ft (0.3 m). M : Test magnet. P : End cap for metal sampling tubes. RA100Z: Remote annunciator alarm LED. RTS151: Remote test station. RTS151 KEY: Remote test station with key lock. Important Note DNRW duct detector housings with a date code of 0013 or higher do not require a DCOIL or auxiliary 24 VDC for remote test applications when used with a remote test capable detector. DNRW duct detector housings with a date code of 0012 or earlier require a DCOIL and auxiliary 24 VDC power for remote test applications. Fire-Lite Alarms is a registered trademark of Honeywell International Inc by Honeywell International Inc. Allrights reserved. Unauthorized use of this document is strictly prohibited. ISO 9001 I MHIJIHZ* ENGINf EBINB 8 MANUFACTURING QUALITY SYSTEMS This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. Allspecifications are subject to change without notice. For more information, contact Fire-LiteAlarms. Phone: (800) , FAX: (877) Made in the U.S. A. Page 2 of 2 DF-60430:C2 12/18/2012

13 ECC-50/1OOC Emergency Command Center General Fire-lite's ECC-50/1 OOC is a multipurpose emergency voice evacuation panel for fire applications, mass notification appli cations, or both. The Primary Operating Consoles (POC's)delivers 50 or 100 watts of audio power for distribution to up to eight speaker circuits (i.e. zones). The ECC-50/1 OOC comes standard with a single speaker circuit and a built-in 25Vrms, 50 watt amplifier. A secondary 50 watt amplifier (ECC-50W-25/70V) can be added for single speaker circuit backup or to increase system capacity to two speaker circuits and an additional 50 watts of audio power. An optional ECC- CE6 module added to the ECC-50/1 OOC will upgrade the sys tem to a maximum of eight speaker circuit outputs. All speaker output circuits can be wired in either Class B or Class A config uration. The ECC-50/1 OOC has fourteen field programmable messages (up to 60 seconds each), built-in field configurable pre- and post-announce tone generators and a fully super vised Notification Appliance Circuit (NAC) with 2.0 amps of synchronized NAC power. The ECC-50/1OOC includes three built-in Form-C relay contacts, (AC power, trouble and MNS active) a NAC follower input for triggering the on board NAC circuit and 500mA special application power. A built-in power supply with switch mode technology delivers operational power to the panel and on board battery charger supports charging up to 26AH batteries (ECC cabinet holds up to 18AH batteries). For fire protection applications, the ECC-50/1 OOC is an adjunct (slave) to most ULC listed FACPs or as a stand-alone unit for non-fire applications. For seamless integration between fire and mass notification, the ECC-50/1 OOC can be activated by the MS-9600LSC(-FR) and MS-9200UDLSC(-FR) when con nected to the serial communication bus. Activation of the ECC- 50/1 OOC via other FACP's uses the eight on board Command Input Circuits (CMD's). Two of the eight CMD circuits (CMD 1 & CMD 2) can be individually field programmed for activation by an FACP Notification Appliance Circuit reverse polarity and all eight can be activated by a contact closure. In addition, the ECC-50/1 OOC can be activated from a building's Private Branch Exchange (PBX) with the integral night ring feature. All ECC-50/1 OOC programming is done by using a simple, built-in programming utility accessed from any laptop. For added flexibility, the ECC-50/1OOC supports both 25Vrms and 70.7Vrms speaker output operation. By adding a 70V trans former conversion module (ECC-XRM-70V) or an additional 70.7 volt secondary amplifier (ECC-50W-25/70V) the system supports 70.7 volt speaker devices. To add more control and increase system capacity, any com bination of up to eight external remote consoles (including the ECC-LOC). TYPICAL APPLICATIONS The ECC-50/1 OOC is used in applications that require singlechannel voice evacuation for buildings with an occupancy greater than 1,000 occupants. Features Modular design for system flexibility and easy expansion Removable terminal blocks for ease of servicing and mod ule replacement Canadian DF-60815:B FireuTeALarms by Honeywell Emergency Communications 50 watts of 25V audio power (expandable to 100 watts) RMS 2 amp Notification Appliance Circuit (NAC) output, sync generator, or follower for System Sensor, or Wheelock pro tocols Optional 70.7V RMS conversion transformer available for the primary amplifier. (Note that speaker wiring continues to be supervised in standby, alarm and when background music is playing with this optional transformer installed) Eight Command Input Circuits to activate messages 1 to 8: - CMD1 and CMD2 are field selectable to be activated from 12 or 24 VDC Notification Appliance Circuits (reverse polarity) or contact closures - CMD3-CMD8 are activated by contact closures Speaker Circuits - Single Class B or Class A speaker Circuit - Two Class B or Class A speaker circuits (with optional ECC-50W-25/70V Audio Amplifier installed) - Eight Class B or Class A speaker circuits (with optional ECC-50W-25/70V and ECC-CE6 installed) ECC-50/1OOC can be controlled by an FACP via the ANN/ ACS (EIA-485) link. Compatible FACPs include the MS- 9600(UD)LS and MS-9200UDLS Certified for seismic applications when used with the appro priate seismic mounting kit Integral supervised microphone Microphone time-out feature which reverts back to prere corded message if emergency page exceeds the pro grammed time 14 recorded messages Field-selectable message and custom message recording capability using the local microphone, a USB port, or an external audio input External Audio Input can be used for background music DF-60815:B-7/28/2015 Page 1 of 6

14 Up to 60 second message duration for all messages Integral tone generators field selectable for multiple tone types Powered by integral AC power supply or batteries during AC fail Programmable delay of immediate, 2 hours or 6 hours reporting of AC Loss Piezo sounder for local trouble 100 event history log Three Form-C relays: - AC Power Loss Relay - TB1 - System Trouble Relay - TB2 - MNS Active - TB3 500mA (0.5A) Special Application (auxiliary power) output for addressable modules when interfaced with compatible addressable FACPs and End-of-Line power supervision relays System Status LEDs (refer to "Controls and Indicators" on product manual LS FL-E) Integral Dress Panel Optional TR-CE semi-flush trim ring Any combination of up to eight (8) external remote con soles: - Optional ECC-LOC Local operator console (includes cab inet). See DF Optional Internal Expansion Modules ECC-CE6: Circuit Expander Module provides connections for up to six Class A or Class B speaker circuits. Circuits are con figured through the web-based programming utility. ECC-50W-25V: 25V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/1 OOC power output to 100 watts or can also be used as a backup amplifier. ECC-50W-70V: 70V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/1 OOC power output to 100 watts or can also be used as a backup amplifier. ECC-XRM-70V: 70V Transformer Conversion Module. Con verts the ECC-50/1OOC primary amplifier to a 70V output. This transformer mounts directly to the ECC-50/1 OOC main control board by two metal brackets. ECC-RTZM: Remote Telephone Zone Module. Allows for secure access to the ECC via cell phone or remote telephone means; not ULC listed. [lgs=»l DIAGNOSTIC -ire SYSTEM OVERRiDE SPEAKER ZONE U S=FAKE» ZOME 15 SPEAKER ZONE 115 ZO'Jc 17 SPEAKER ZCIE 18 SHAKES ZOV= 19 SPEAKER ZO>i= 20 ZONE 21 WEAKER zone n SYSTEU cowirai OK TO PAGE MKROPMOXE TROUBLE MESSAGE 1 MESSAGE 2 MESSAGE] MESSAGE* MESSAGE S MESSAGES MESSAGE 7 MESSAGE I REMOTE AMPS mount sukct a co«*::oi i t*w irtt ^~ -~ C=»^- > dist amp i C=»J> ACPCMIR 0> ttaw COKSOU GROUND IAUU D> LOC 1 > OiST AMP 2 c=»5> CNARGtRIAMJ D > lc>: : > D!ST AJ/P i =~> QAIUKUAltLI ppi.': > PIS7 i /P 4 ^> DATA BUS UUM Rptj: > DIJT AMP 5 > KACfAUM Ofj J > OIS1 AMP 6 > KACACffVT n> > DI5T AMP 7 > sysiim mount D *** > PiS.T AMPS > AUDWBKlaiAOtT 0 > Control and Indicators PUSH BUTTON CONTROLS All Call MNS Control System Control Speaker Select 1-24 Message Select 1-14 Diagnostic Select Trouble Silence Console Lamp Test BM 1 PM2 5V1 Page 2 of 6 Canadian DF-60815:B 7/28/2015

15 - - * horns/strobes IS?I \M NAC Circuit TB19 Speaker Circuits TB20&TB21 rn c7 ~m ;. : : W : : w ; : : a : : C3 : : :-. a : : : -. o [? > I : C3 : ; a.:.-. :.-: I C3 3 ZD =3 Internal options ECC-50W-25/70V optional amplifier i i ECC-CE6 circuit expander OTS& DOOOOli cm CD CD CD CD EMERGENCY COMMAND CENTER rw] m 0^«-«DyHoneyv^l OTB4 Lu 'A -. ECC-LOC local operator console external battery charger - J7 TB12 TB22 9 CHG-120F charger!:::^::jx.cooo...o oook a m / v i L ± X ECC-50/100C Emergency Command Center (Possible Configurations) Canadian DF-60815:B 7/28/2015 Page 3 of 6

16 LED Status Indicators (visible with door closed) BAT-12120: Battery,12 volt,12.0 AH (Two required). BAT-12180: Battery,12 volt, 18.0 AH (Two required). Fire System Active (green) MNS Control (green) System Control (green) System in Use (green) Speaker Zone 1-24 Active (green) LOC/RM 1-8 Active (green) Main Console Fault (yellow) AC Power (green) Ground Fault (yellow) Charger Fault (yellow) Wiring Requirements See product manual, part number LS FL-E for detailed wiring requirements. Total System Capacity: (ECC-50/1 OOC only) Speaker Zone 1-24 Fault (yellow) OK to Page (green) Microphone Trouble (yellow) Message 1-8 Active (red) Message 1-8 Fault (yellow) Remote Amplifier 1-8 Fault (yellow) LOC/RM 1-8 Fault (yellow) Battery Fault (yellow) Data Bus Fault (yellow) NAC Fault (yellow) NAC Active (green) System Trouble (yellow) Audio Riser Fault (yellow) LED Indicators (visible with door and dress panel open) Speaker Volume Control Fault (yellow). Option Card Fault (yellow). Amplifier Over Current Fault (yellow). Product Line Information ECC-50/1 OOC: (Primary Operating Console) 50 Watt, 25VRMS single speaker zone emergency voice evacuation system, integral microphone, built in tone generator and 14 recordable messages. ECC-CE6: Speaker Circuit/Zone Expander Module. ECC-50W-25V: 25V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/1 OOC power output to 100 watts or can also be used as a backup amplifier. ECC-50W-70V: 70V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/1 OOC power output to 100 watts or can also be used as a backup amplifier. ECC-XRM-70V: 70V Transformer Conversion Module. Con verts the ECC-50/1 OOC primary amplifier to a 70V output. This transformer mounts directly to the ECC-50/1 OOC main control board by two metal brackets. ECC-RTZM: Remote Telephone Zone Module. Allows for secure access to the ECC via cell phone or remote telephone means; not ULC listed. ECC-LOC: Local Operator Console (Complete user interface), Please refer to the data sheet DF for more information. SEISKIT-COMMENC: Seismic kit for the ECC-50/100C. Includes battery bracket for two 12 AH or 18 AH batteries. MMF-301A: Addressable Mini-Monitor Module. I300A: SLC Line Isolation Module. TR-CE: Optional Trim Ring. THUMBLTCH: Optional Thumb Latch. (Non ULC-Listed). CHG-120F: ampere-hours (AH) External Battery Charger. ECC-MICROPHONE: Replacement Microphone only. BAT-1270: Battery,12 volt,7.0 AH (Two required). Total Built-in Audio Power: 50 Watts. Total Expandable Audio Power: 100 Watts. Total Built-in Speaker Circuits: 2. Total Expandable Speaker Circuits: 8. Audio Message Max Time Duration: 60 seconds. External Audio Input: 1. Electrical Specifications PRIMARY (AC) POWER (TB15) ECC-50/1 OOC: 120 VAC, 60 Hz, 3.5 amps (HOT, NEU). Wire size: minimum U14AWG (2.00mm2) with 600 V insulation. SECONDARY POWER (BATTERY) CHARGING CIR CUIT (J7) Supports lead-acid batteries only. Float charge voltage at 27.3V Maximum charge current: 1.0 Amp Maximum battery charge capability: 2.8 Amps, 26AH (ECC cabinet holds max. 18AH battery). Minimum Battery size: 12 Amp Hour. AC LOSS RELAY CONTACT RATING (TB3) VDC(resistive), VAC (resistive). FORM C - TROUBLE RELAY CONTACT RATING (TB2) VDC(resistive), VAC (resistive). MNS ACTIVE RELAY CONTACT RATING (TB1) VDC(resistive), VAC (resistive). NOTIFICATION APPLIANCE CIRCUIT (NAC) RATING (TB19) One (1) Class B or Class A circuit. Power-limited circuitry, (Class 2) supervised. OUTPUT Nominal operating voltage: 24 VDC. Maximum signaling current for special application power: 2.0A. Maximum signaling current for regulated power: 200mA. Maximum wiring impedance: 1 1 Current limit: fuse-less, electronic, power-limited. End-Of-Line Resistor: 4.7 KQ, 1/2 watt, (P/N 71252) required for Class B operation. Refer to the Device Compatibility Document for listed compatible devices. NAC FOLLOWER OUTPUT REMOTE SYNC (TB18) Connections for FACP NAC synchronization trigger signal. Trigger input voltage: 9 to 32 VDC, 24 VDC rated. Input current draw in Alarm condition: 10 ma at rated volt age. Page 4 of 6 Canadian DF-60815:B 7/28/2015

17 SPECIAL APPLICATION POWER (AUX. POWER) (TB17) Used for powering addressable modules and associated End-of-Line power supervision relays Power-limited circuitry. Refer to the Device Compatibility Doc ument for a list ofcompatible devices. SPEAKER VOLUMECONTROL OVERRIDE (TB23) Class B or Class A circuit Special application power Power-limited circuitry, supervised Nominal operating voltage: 24 VDC Maximum signaling current: 0.25 amps Current limit: fuse-less, electronic, power-limited End-Of-Line Resistor: 4.7 Kfl, 1/2 watt, (P/N 71252) required for Class B operation Speaker Circuits Primary Speaker Circuit (TB20) Secondary Speaker Circuit (TB21) (with optional amplifier only) - Circuit can be wired Class B or Class A - Power-limited circuitry - Normal Operating Voltage: 25 2 amps max and maximum Load Impedance of 12.5ft ( ma max. with maximum load Impedance of 100ft opera tion possible by plugging optional ECC-XRM-70V conver sion transformer into J12 of the main control board) -Output Power: 50 watts (10 watts when background music is employed) - Frequency Range: 400Hz - 4,000Hz - Maximum total capacitance for each speaker circuit: End-of-Line Resistor required for Class B circuit: 15 Kft, 1 watt (P/N: ELR-15K) Command Input Circuits (alarm polari ties shown) CMD1 - TB4 Terminals 3(+) & 4(-) are input terminals and Ter minals 1(-) and 2(+) are output terminals which provide feed through of the NAC circuits to NAC devices down stream. CMD2 - TB5 Terminals 3(+) & 4(-) are input terminals and Ter minals 1(-) and 2(+) are output terminals which provide feed through of the NAC circuits to NAC devices downstream. CMD3 - TB6 Terminals 1(+) & 2(-) are input terminals for con tact closure only. CMD4 - TB6 Terminals 3(+) & 4(-) are input terminals for con tact closure only. CMD5 - TB7 Terminals 1(+) & 2(-) are input terminals for con tact closure only. CMD6 - TB7 Terminals 3(+) & 4(-) are input terminals for con tact closure only. CMD7 - TB8 Terminals 1(+) & 2(-) are input terminals for con tact closure only. CMD8 - TB8 Terminals 3(+) & 4(-) are input terminals for con tact closure only. Power-limited and supervised circuitry Normal Operating Voltage Range: 10.5 VDC - 29 VDC; (Maximum Voltage: 29 VDC) NAC Reverse Polarity Current (requires End-of-Line Resis tor from NAC): 1.6 ma maximum Contact Closure Operation Current (requires 4.7Kft, 72watt End-of-Line Resistor P/N 27072): 6.6 ma maximum Maximum Wiring Impedance CMD1 - CMD8 (Contact Clo sure Operation): 200ft NOTE: When the system is programmed for Mass Notification, CMDIand CMD2 will be programmed for Reverse Polarity only. See manual P/N: LS FL-E for more details. MAXIMUM INPUT IMPEDANCE: CMD1 &CMD2 (Reverse Polarity Operation): 20Kft CMD1 - CMD8 (Contact Closure Operation): 4.75Kft NIGHT RING INPUT- TB16, TERMINALS 1 (+)&2 (-) Contact closure input Isolated, non-supervised Operation current: 3.8 ma, maximum Maximum wiring impedance: 30Kft Minimum isolation withstand voltage: 1500 VRMS EXTERNAL OPERATOR INTERFACE POWER OUTPUT (TB24) Non-resettable power for external operator interface com ponents Power-limited circuitry, non-supervised Nominal operating voltage: 24 VDC Maximum output current: 0.80 amps Current limit: fuse-less, electronic, power-limited circuit EXTERNAL DATA BUS (EIA-485) (TB12) Data connections for external operator interface components Redundant transceiver circuitry for Class A operability Power-limited circuitry, supervised Maximum wiring impedance: 13.2ft. FACP DATA BUS (EIA-485) (TB13) Dedicated connection to FACP serial bus Output terminals: pass-through to other system components. Isolated, supervised Minimum isolation withstand voltage: 1500 VRMS Maximum wiring impedance: 40ft (ANN-BUS), 26ft (ACS-BUS) External Audio Riser (TB22) Class B or Class A audio connections to external operator interface components Power-limited circuitry, supervised Audio signal level: 3.85 V, maximum Frequency range: 400 Hz - 4 KHz RMS ELECTRICAL SPECIFICATIONS DISPLAY BOARD EXTERNAL AUDIO INPUT (TB5) Input Impedance: 8.5Kft KHz Input Voltage: 700 mvrms maximum Input Current: 0.1 ma 700 mv NOTE: Some laptops/personal computers only provide an audio output for headphones. It may be necessary to adjust the head phone output level for proper recording of voice messages. ECC-CE6 Circuit Expander Module Specifications Power-limited circuitry Canadian DF-60815:B 7/28/2015 Page 5 of 6

18 Up to six (6) circuits on the ECC-CE6 can be wired as Class B or Class A) Normal Operating Voltage for Speaker Circuits: amps max. (Maximum Load Impedance of 12.5ft) ma max. with maximum Load Imped ance of 100ft operation possible for the primary circuit by plugging in an optional ECC-XRM-70V conversion trans former into J12 of the main control board. The same opera tion is possible for the optional 50W amplifier by selecting the ECC-50W-70V model Speaker circuit wiring is supervised during standby, back ground music, and alarm Output Power: 50 watts total; Frequency Range: 400Hz - 4,000Hz Maximum total capacitance: 250 uf. (Note that the total capacitance for the speaker outputs must not exceed the maximum of 250 uf) End-of-Line Resistor required for Class B speaker circuit: 15 KQ, 1 watt (P/N: ELR-15K) TB13 on the main control board: ACS/ANN (EIA-485) electrically isolated link to FACP provides programmed speaker control Cabinet Specifications Backbox: 19.0"(48.26 cm) high x 16.65"(42.29 cm) wide x 5.20"(13.23cm)deep. Door: 19.26" (48.92 cm) high x 16.82"(42.73 cm) wide x 0.12"(0.30cm)deep. Trim Ring (TR-CE): 22.00" (55.88 cm) high x 19.65" (49.91 cm) wide. Shipping Specifications Base Unit Weight: lbs (12.63 kg). Temperature and Humidity ranges This system meets ULC requirements for operation at 0-49 C/ F and at a relative humidity 93% ± 2% RH (noncondensing) at 32 C ± 2 C (90 F ± 3 F). However, the useful life of the system's standby batteries and the electronic com ponents may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of C/ F. Agency Listings and Approvals The listings and approvals below apply to the basic ECC-50/ 100 control panel. In some cases, certain modules may not be listed by certain approval agencies or listing may be in pro cess. Consult factory for latest listing status. UL/ULC Listed S2424 CSFM: :0226. NYC Fire Dept.Certificate of Approval: #6152 FM Approved. Standards and Codes The ECC-50/1 OOC complies with the following ULC Standards, International Building Codes, and with NFPA 72 Fire Alarm system requirements. CAN/ULC-S572. IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seis mic). Fire-Lite Alarms is a registered trademark of Honeywell International Inc by Honeywell International Inc. All rights reserved Unauthorized use of this document is strictly prohibited. ISO 9001 r^ i ijni ii fflhkbinb&mmirmtiring QUALITY SYSTEMS This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire-Lite Alarms. Phone: (800) , FAX: (877) /r Page 6 of 6 DF-60815:B 7/28/2015

19 DF-60760:C C-240 ECC-RM Remote Microphone FireiiTeALarms by Honeywell Emergency Communications General Firelite's ECC-RM is an optional Remote Microphone that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of a family of external remote consoles that allows for extending the opera tor interface to remote locations within a building. It is housed in a cabinet with a keyed or an optional thumb lock to limit access to qualified personnel. The ECC-RM remote microphone allows for ALL CALL paging to be broadcast over the speaker circuits when depressing the microphone's push-to talk switch. The RM requires an external data bus connection, an external audio riser connection, and an external operator interface power connection (24 Volts DC) from the ECC-50/100 main console. TYPICAL APPLICATIONS Schools Theaters Auditoriums Healthcare Facilities Factories Military facilities Restaurants Places of Worship Office Buildings Dormitories Features External remote console that provides ALL CALL paging broadcasts over the speaker zones of the ECC-50/100(E) primary operating console. Modular design for maximum system flexibility and easy expansion. Supports both Class A (Style Z) and Class B (Style Y) wir ing. A maximum of eight ECC-RMs can be connected to an ECC-50/100(E) primary operating console. Built-in microphone with push-to-talk feature that can be used for ALL CALL paging. Sturdy cabinet design with a keyed lock to prevent unautho rized access. Optional thumb lock is available. Simple and straightforward user interface. Electrical Specifications PRIMARY POWER REQUIREMENTS: Voltage 24VDC non-resettable power from the ECC-50/ 100(E). External Operator Interface Power (Non-supervised). See ECC-50/100(E) Product Manual P/N LS FL-E forstandby and alarm current requirements as well as battery calculations. Wiring Requirements See Product Installation Document PN: LS FL-E for detailed wiring requirements. Agency Listings and Approvals The listings and approvals below apply to the ECC-RM Remote Microphone. In some cases, certain modules may not be listed by certain approval agencies or listing may be in pro cess. Consult factory for latest listing status. UL Listed S2424 CSFM: :0228 FDNY:COA#6152 FM Approved Standards and Codes The ECC-RM complies with NFPA 101 Life Safety Code and with the following UL Standards and with NFPA 72 Fire Alarm system requirements. UL 864. Temperature and Humidity ranges This system meets NFPA requirements for operation at 0-49 C/ F and at a relative humidity 93% ± 2% RH (noncondensing) at 32 C ± 2 C (90 F ± 3 F). However, the useful life of the system's standby batteries and the electronic com ponents may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of C/ F. Cabinet Specifications 8.3" ( cm) high x 6.080" (15.44 cm) wide x 4.337" (11.02 cm) deep (Door attached and closed). Shipping Specifications Weight: 4 lbs (1.81 kg). DF-60760:C 6/23/2015 Page 1 of 4

20 /A NAC Circuit TB19 Speaker Circuits TB20&TB21 H eg idb as S!l CS 31 T 3» ECC-FFT Firefighter Telephone us 09 i«9 r^ O -J : EUEftiJ LA. try C(. MM.ANLI C EH (1 } ECC RPU remote Local Operator Console Remote Paging Unit consoles O TB24 ECC-RM Remote Microphone external battery distributed audio TB12 charger - J7 w M TB22 ^ ECC-50DA 50W remote amplifier ECC125DA 125W remote amplifier ECC-50BDA 50W remote amplifier Ed, -, a *5' rs rn a & a a CHG-120F charger CHG-75 charger ECC-50/100(E) Emergency Command Center (Possible Configurations) Page 2 of 4 DF-60760:C 6/23/2015

21 Control and Indicators PUSH BUTTON CONTROLS Microphone Push to talk switch LED STATUS INDICATORS (VISIBLE WITH DOOR CLOSED) System in Use (green) OK to Page (green) AC Power (green) Data Trouble (yellow) Audio Trouble (Yellow) Microphone Trouble (yellow) Product Line Information (Ordering Information) ECC-RM: Remote Microphone only. ECC-50/100: (Primary operating Console) 50 Watt, 25VRMS single speaker zone emergency voice evacuation system, Integral microphone, built in tone generator and 14 recordable messages. Please refer to the data sheet DF for more information. ECC-50/100E: Export version (Primary operating Console) 50 Watt, 25VRMS single speaker zone emergency voice evacua tion system, Integral microphone, built in tone generator and 14 recordable messages. Please refer to the data sheet DF for more information. ECC-CE6: Speaker Circuit/Zone Expander Module. ECC-50W-25V: 25V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/100 power output to 100 watts or can also be used as a backup amplifier. ECC-50W-70V: 70V, 50 watt audio amplifier module. Adding a second speaker circuit increases the total ECC-50/100 power output to 100 watts or can also be used as a backup amplifier. ECC-XRM-70V: 70V Transformer conversion module for 70V operation. ECC-LOC: Local Operator Console (Complete user interface), Please refer to the data sheet DF for more information. ECC-RPU: Remote Page Unit Hand held microphone, 14 message buttons. Please refer to the data sheet DF for more information. ECC-50DA: Distributed (Remote) Audio Amplifier, 50 watts. Please refer to the data sheet DF for more information. ECC-50BDA: Distributed (Remote) Audio Amplifier with backup, 50 watts/100 watts at 25Vrms or 70Vrms.Please refer to the data sheet DF for more information. ECC-50WBU: Expander card for ECC-BDA remote amplifier for 100 watt primary/50 watt backup operation. Please refer to the data sheet DF for more information. ECC-125DA: Distributed (Remote) Audio Amplifier, 125 watts. Please refer to the data sheet DF for more infomiation. ECC-50DAE: Export version. Distributed (Remote) Audio Amplifier, 50 watts, 240 VAC, 50 Hz. Please refer to the data sheet DF for more information. ECC-125DAE: Export version. Distributed (Remote) Audio Amplifier, 125 watts, 240 VAC, 50 Hz.Please refer to the data sheet DF for more information. ECC-CE4: Distributed Audio Speaker Circuit/Zone expander module. ECC-FFT: Fire Fighter Telephone System. Please refer to the data sheet DF for more information. FPJ-F: Remote Phone Jack. FHS-F: Fire Fighters Remote Handset. FHSC-RF: Fire Fighters Handset Cabinet Recessed. FHSC-SF: Fire Fighters Handset Cabinet Surface Mount. MMF-301: Addressable Mini-Monitor Module. I300: SLC Line Isolation Module. TR-CE: Optional Trim Ring. ECC-MICROPHONE: Replacement Microphone Only. CHG-75: 25 to 75 ampere-hours (AH) external battery charger. CHG-120F: ampere-hours (AH) external battery charger. BAT-1270: Battery, 12volt, 7.0AH (Two required). BAT-12120: Battery,12volt,12.0AH (Two required). BAT-12180: Battery,12volt, 18.0AH (Two required). BB-26: Battery back box - Mounts up to 2, BAT Batteries. BB-55F: Battery Box - Mounts up to 2, BAT or BAT s. MMF-300: Monitor module used to supervise dry contact input devices. ECC-THUMBLTCH: Optional Thumb Latch. (Non UL-Listed). " 77 - * L SrSTEM IN USE o OK TO PAGE o POWER -TJ o OA1A IKOUULt O WLp mi i 1.! AUIMO TROUBLE \ MIC THOOBLE O I N DF-60760:C 6/23/2015 Page 3 of 4

22 Fire-Lite Alarms is a registered trademark of Honeywell International Inc by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. ESEEE ISO ffibnekm&maiaftttiaks QUALITY SYSTEMS JHVimWBlJISIMHWWBa This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. a3hee"-2"*3 S For more information, contact Fire-Lite Alarms. Phone: (800) , FAX: (877) 699^ Assembled in the USA Page 4 of 4 DF-60760:C 6/23/2015

23 BAT Series Batteries Sealed Lead-Acid DF-52397:C1 D-500 FireiiTeALarms by Honeywell Power Supplies/Accessories General BAT Series Batteries are Power Sonic brand batteries. BAT Series (or Power Sonic brand) batteries are recommended for secondary power or backup power for all Fire*Lite fire alarm control equipment. Features Provide secondary power for control panels. Sealed and maintenance-free. Overcharge protected. Easy handling with leakproof construction. Ruggedly constructed, high-impact case (ABS, polystyrene, or polypropylene, depending on models). Long service life. Compact design. Agency Listings and Approvals The listings and approvals below apply to BAT Series Batteries. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Recognized Components: MH20845 (Power-Sonic) 6933covff>g Ordering Information BAT-1250-BP: 10-unit bulk pack of BAT-1250 (12 V 5 AH) BAT-1270-BP: 5-unit bulk pack of BAT-1270 (12 V 7 AH) BAT BP: 4-unit bulk pack of BAT (12V 12 AH) BAT BP: 2-unit bulk pack of BAT (12 V 18 AH) BAT BP: 2-unit bulk pack of BAT (12 V 26 AH) BAT-12550: single battery (12 V 55 AH) BAT : single battery (12 V 100 AH) Part Number Reference & Specifications Part Number Power Sonic Part Number Nominal Voltage V Battery Description Nominal 20 hr. rate A.H. DIMENSIONS Width Depth Height Height over terminal Weight in. mm in. mm in. mm in. mm lb. kg- BAT-1250 PS sealed BAT-1270 PS sealed BAT PS sealed BAT PS sealed BAT PS sealed BAT PS sealed BAT PS sealed DF-52397:C1 7/13/2011 Page 1 of 2

24 Characteristic Discharge Curves Effect of Temperature on Capacity e > " "->. > \,,k 0.25C D.175C C5C m o't: XI6C / / 3C 2C 1C minutes hours -J Discharge 20*0 (68*F) " Temperature (Degrees C.) 100% Charging is NOT necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. at left: PS Shelf-Life and Storage Charge may fail to restore full capacity. DO NOT let batteries reach this slate Standing Period (Months) 14.0 V 13.0 V ~T~n i i m i Ambient Temperature 20"C (68 F) 12.0 V 11.0V 10.0 V at left: PS Discharge Characteristics 9.0 V 8.0 V MINUTES X HOURS Discharge Time Fire-Lite Alarms is a registered trademark of Honeywell International Inc. Batteries display trademarks of the manufacturer by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. ISO9001 Mj:ijui-jn EMTOiraSfiWtlfttTlMS QUALITY SYSTEMS This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire»Lite Alarms. Phone: (800) , FAX: (877) Made in the U.S. A. Page 2 of 2 DF-52397:C1 7/13/2011

25 DF-52301:A2»D-025 FCPS-24FS6 24 Volt, 6 Amp Power Supply FireuTeALarms by Honeywell Power Supplies/Accessories General The Fire'Lite FCPS-24FS6(C/E) is a compact, cost-effec tive, 6-amp remote power supplies with battery charger. The FCPS-24FS6(C/E) may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may stand-alone. Primary appli cations include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC synchroni zation) or auxiliary power to support 24 volt system accesso ries. The FCPS provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either two Class B (Style Y) and Class A (Style Z, with ZNAC-4 option module) or four class B only. Alternately, the four outputs may be configured as any combination of resettable/non-resettable power outputs (optimal for powering four-wire smoke detec tors. The FFCPS-24FS6(C/E) also contains a battery charger capable of charging up to 7.0 Amp hour batteries. FCPS- 24FS6(C/E) is ULC-listed. NOTE: Unless otherwise specified, the term FCPS-24FS6 used in this document refers to the standard FCPS-24FS6, FCPS- 24FS6C, FCPS-24FS6E Features UL-Listed Notification Appliance Circuit (NAC) synchroniza tion using System Sensor, Wheelock, or Gentex "Com mander2" appliances. Operates as a "sync-follower" or as a "sync-generator" (default). See note on page 2. Contains two fully-isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped perma nently "ON" (stand-alone mode). Two Class B (Style Y) or Class A (Style Z, with ZNAC-4 module) NACs (circuits 1 & 3) 6-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864). 4-amp continuous output in stand-alone mode (UL 1481). Compatible with coded inputs; signals passed through. Optional power-supervision relay (EOLR-1). In stand-alone mode, output power circuits may be config ured as: resettable, (reset line from FACP required), non-resettable, or a mix of two and two. Fully regulated and filtered power output - optimal for pow ering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power. Power-limiting technology meets UL power-limiting require ments. Form-C normally-closed trouble relay. Fully supervised power supply, battery, and NACs. Selectable earth fault detection. AC trouble report selectable for immediate 2-hour delay. Works with virtually any UL 864 fire alarm control which uti lizes an industry-standard reverse-polarity notification cir cuit (including unfiltered and unregulated bell power). Requires input trigger voltage of 9-32 VDC. Self-contained in compact, locking cabinet - 15"H x 14.5"W x 2.75"D (cm: 38.1 H x 36.83W x 6.985D). Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batter ies. Battery charger may be disabled via DIP switch for applica tions requiring larger batteries. Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire. Specifications Primary (AC) Power: FCPS-24FS6: 120 VAC, 60 Hz, 3.2A maximum. FCPS-24FS6/E: 240 VAC, 50 Hz, 1.6A maximum. Wire Size: minimum #14 AWG (2.0mm2) with 600 Vinsula tion. Control Input Circuit: Trigger Input Voltage: 9 to 32 VDC. Trigger Current: 2.0 ma (16-32 V); Per Input: 1.0 ma (9-16 V). Trouble Contact Rating: 5 A at 24 VDC. Auxiliary Power Output: maximum. Output Circuits: +24 VDC filtered, regulated. 3.0 A maximum for any one circuit. Specific application power 500 ma Total continuous current for all outputs (stand-alone mode): - FCPS-24F: 4.0 A maximum. Total short-term current for all outputs (NAC expander mode): - FCPS-24F: 6.0 A maximum. DF-52301:A2 5/17/13 Page 1 of 4

26 Secondary Power (Battery) Charging Circuit: Supports lead-acid batteries only. Float-charge voltage: 27.6 VDC. Maximum current charge: 250 ma. Maximum battery capacity: 7.0 AH. Applications Example 1: Expand notification appliance power an additional 6.0 A. Use up to four Class B (Style Y) outputs or four Class A (Style Z) outputs (using ZNAC-4). For example, the FACP noti fication appliance circuits willactivate the FCPS when reversepolarity activation occurs. Trouble conditions on the FCPS are sensed by the FACP through the notification appliance circuit. Example 2: Use the FCPS to expand auxiliary regulated 24- volt system power up to 4.0 A. Both resettable and non-reset table power options are available. Resettable outputs are cre ated by connecting the resettable output from the FACP to one or both of the FCPS inputs. Example 3: Use addressable control modules to activate the FCPS instead of activating it through the FACP notification appliance circuits. This typically allows for mounting the FCPS at greater distances* away from the FACP while expanding system architecture in various applications. For example, an addressable control module is used to acti vate the FCPS, and an addressable monitor module is used to sense FCPS trouble conditions. Local auxiliary power output from the FCPS provides power to the addressable control module. 'NOTE: Addressable FACPs are capable of locating control and monitor modules at distances of up to 10,000 feet (3,046 meters). Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed: S2424, S1287 ULC Listed: S2424 CSFM Approved: :176 MEA: E Ordering Information FCPS-24FS6: 6.0 A, 120 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15"H x 14.5"W x 2.75"D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. FCPS-24FS6 is ULC-listed. FCPS-24FS6E: 6.0 A, 240 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15"H x 14.5"W x 2.75"D [cm: 38.1 H x 36.83W x 6.985D]), and installation instructions. ZNAC-4: Class A (Style Y) NAC option module. EOLR-1: 12/24 VDC end-of-line relay for monitoring four-wire smoke detector power. BAT-1270: Battery, 12-volt, 7.0 AH (two required). PS-1270: Battery, 12-volt, 7.0 AH (two required) : Optional module mounting kit, is required to install an addressable module on the power supply main circuit board. Sync Follower/Generator Note In some installations, it is necessary to synchronize the flash timing of all strobes in the system for ADA compliance. Strobes accomplish this by monitoring very short timing pulses on the NAC power which are created by the FACP. When installed at the end of a NAC wire run, the FCPS-24FS6 can track (i.e. "follow") the strobe synchronization timing pulses on the existing NAC wire run. This maintains the overall system flash timing of the additional strobes attaches to the FCPS. When the FCPS-24FS6 is configured (via DIP switch settings) as a "sync follower," the FCPS's NAC outputs track the strobe synchronization pulses present at the FCPS's sync input ter minal. The pulses originate from an upstream FACP or other power supply. When the FCPS-24FS6 is configured (via DIP switch settings) as a "sync generator," the FCPS's sync input terminals are not used. Rather, the FCPS is the originator of the strobe synchro nization pulses on the FCPS's NAC outputs. In "sync genera tor" mode, the sync type (System Sensor, Wheelock, or Gentex) is selectable via DIP switch settings. Standards and Codes The FCPS-24FS6 complies with the following standards: NFPA 72 National Fire Alarm Code. UL 864 Standard for Control Units for Fire Alarm Systems (NAC expander mode). UL 1481 Power Supplies for Fire Alarm Systems. Page 2 ot 4 DF :A2 5/17/13

27 AC Power NOTE: All NAC outputs can be converted to Style Z with Style YNAC or ^.iv^o-^ ZNAC-4 option ufjuun muuuit;. module. i FCPS Door Holder Trouble Power Style Y NAC StyleY NAC StyleY NAC Contact Output #4 Output #3 Output #2 Output #1 Output t t t t t INPUT/OUTPUT FUNCTIONS are programmable by SW1 DIP switch settings 24 VDC Specific Application Power NAC Control Input #2 (from FACP) NAC Control Input #1 (from FACP) FCPS Sync Input Battery Charger Simplified Block Diagram DF :A2 5/17/13 Page 3 Of4

28 I.a. E -i p^ 9 o S "- s h9? «g 5 i: 2 S.- ->OQ-ii i i 1 1 I I I o o o «If- :-o. o o ik I A: o c c ;: C5 i. c r- 2 _ oo << 22 = < in o Ez "> c _j c B c 3 i O ill a E o ill s S E-,.2 1 OOO i i i e oo =ioe ^ g, u> &- 3 2 o S UJ < O CO2 O * t e a a aa a o a ODD Board Layout System Sensor and FireLite Alarms are registered trademarks of Honeywell International Inc by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. ISO 9001 ENEINHBINC & MANDFACTBIINB QUALITY SYSTEMS This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire-Lite Alarms. Phone: (800) , FAX: (877) Made in the U.S. A. Page 4 of 4 DF :A2 5/17/13

29 MMF-300(A) Series, MDF-300 Addressable Monitor Modules DF-52121:E-E-325 FireuTeALarms by Honeywell Addressable Devices General Four different monitor modules are available for Fire-Lite's intelligent control panels to suit a variety of applications. Moni tor modules are used to supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (MMF-302(A)). MMF-300(A) is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. MMF-301 (A) is a miniature monitor module a mere 1.3" (3.302 cm) H x 2.75" (6.985 cm) W x 0.65" (1.651 cm) D that super vises a Style B (Class B) circuit of dry-contact input devices. Its compact design allows the MMF-301 (A) to be mounted in a single-gang box behind the device it monitors. MMF-302(A) is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit. MDF-300(A) is a standard-sized dual monitor module used to monitor and supervise two independent two-wire Style B (Class B) dry-contact initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two-wire sys tems. LiteSpeed is a communication protocol developed by Fire-Lite Engineering that greatly increases the speed of com munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other communication protocols. MMF-300(A) Monitor Module Built-in type identification automatically identifies this device as a monitor module to the control panel. Powered directly by two-wire SLC loop. No additional power required. High noise (EMF/RFI) immunity. SEMS screws with clamping plates for ease of wiring. Direct-dial entry of address: on MS-9600 series panels, on other compatible systems. LED flashes during normal operation and latches on steady to indicate alarm. The MMF-300(A) Monitor Module is intended for use in intelli gent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It pro vides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300(A) can be used to replace M300(A) modules in existing systems. MMF-300(A) Applications Use to monitor a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normallyopen dry-contact alarm activation devices. May also be used to monitor normally-open supervisory devices with special MMF-300(A) (Type H) supervisory indication at the control panel. Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. MMF-300(A) Operation Each MMF-300(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-300(A) Specifications Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.0 ma (LED on). Average operating current: 375 ua (LED flashing), 1 com munication every 5 seconds, 47k EOL. Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. EOL resistance: 47K Ohms. Temperature range: 32 F to 120 F (0 C to 49 C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MMF-301 (A) Mini Monitor Module Built-in type identification automatically identifies this device as a monitor module to the panel. Powered directly by two-wire SLC loop. No additional power required. High noise (EMF/RFI) immunity. DF-52121:E-07/30/2015 Page 1 of 4

30 Tinned, stripped leads for ease of wiring. Direct-dial entry of address: on MS-9600 series panels, on other compatible systems O V V The MMF-301 (A) Mini Monitor Module can be installed in a single-gang junction directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The MMF-301 (A) is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiat ing device circuit for normally-open-contact fire alarm devices. The MMF-301 (A) can be used to replace M301(A) modules in existing systems. MMF-301(A) APPLICATIONS Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit/ device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K Ohm End-of-Line Resistor (provided) terminates the circuit. MMF-301(A) Operation Each MMF-301 (A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor mal/short) of its Initiating Device Circuit (IDC). MMF-301(A) Specifications Nominal operating voltage: 15 to 32 VDC. Average operating current: 350 ua, 1 communication every 5 seconds, 47k EOL; 600 ua Max. (Communicating, IDC Shorted). Maximum IDC wiring resistance: 1500 Ohms. Maximum IDC Voltage: 11 Volts. Maximum IDC Current: 450 ua. EOL resistance: 47K Ohms. Temperature range: 32 F to 120 F (0 C to 49 C). Humidity range: 10% to 93% noncondensing. Dimensions: 1.3" (3.302 cm) high x 2.75" (6.985 cm) wide x 0.65" (1.651 cm) deep. Wire length: 6" (15.24 cm) minimum. MMF-302(A) Interface Module Supports compatible two-wire smoke detectors. Supervises IDC wiring and connection of external power source. High noise (EMF/RFI) immunity. SEMS screws with clamping plates for ease of wiring. Direct-dial entry entry of address: on MS-9600 series panels, on other compatible systems. LED flashes during normal operation. LED latches steady to indicate alarm on command from control panel. The MMF-302(A) Interface Module is intended for use in intelli gent, addressable systems, where the individual address of each module is selected using built-in rotary switches. This module allows intelligent panels to interface and monitor twowire conventional smoke detectors. It transmits the status (normal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored must be UL compatible with the module. The MMF-302(A) can be used to replace M302(A) modules in existing systems. MMF-302 (A) Applications Use the MMF-302(A) to monitor a zone of two-wire smoke detectors. The monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 3.9 K Ohm End-of-Line Resistor (provided) terminates the end of the Style B or D (class B or A) circuit (maximum IDC loop resistance is 25 Ohms). Install ELR across terminals 8 and 9 for Style D application. MMF-302(A) Operation Each MMF-302(A) uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/nor mal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). MMF-302(A) Specifications Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 ma (LED on). Maximum IDC wiring resistance: 25 Ohms. Average operating current: 270 ua, 1 communication and 1 LED flash every 5 seconds, 3.9k eol. EOL resistance: 3.9K Ohms. External supply voltage (between Terminals T10 and T11): DC voltage: 24 volts power limited. Ripple voltage: 0.1 Vrms maximum. Current: 90 ma per module maximum. Temperature range: 32 F to 120 F (0 C to 49 C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300(A) Dual Monitor Module The MDF-300(A) Dual Monitor Module is intended for use in intelligent, two-wire systems. It provides two independent twowire initiating device circuits (IDCs) at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices. The module has a single panelcontrolled LED. Page 2 of 4 DF-52121:E 07/30/2015