ÍST EN :2015. Gildistaka ICS: 53.06
|
|
- Grant Underwood
- 5 years ago
- Views:
Transcription
1 ÍST EN :2015 Gildistaka ICS: Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda
2 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren July 2013 ICS Will supersede EN 1459:1998+A3:2012 English Version Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with work platform Chariots tout-terrain - Exigences de sécurité et vérification - Partie 3: Exigences supplémentaires pour chariots à portée variable équipés d'une plateforme de travail Geländegängige Stapler - Sicherheitsanforderungen und Verifizierung - Teil 3: Zusätzliche Anforderungen für Stapler mit veränderlicher Reichweite ausgerüstet mit Arbeitsbühne This draft European Standard is submitted to CEN members for second enquiry. It has been drawn up by the Technical Committee CEN/TC 150. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. pren :2013: E
3 Contents Page Foreword...3 Introduction Scope Normative references Terms and definitions Requirements General Interface with the work platform General Locking of the work platform Dismounting of the work platform from the truck Cables and connections Mechanical locking device Safety related functions Verification Design verification Functional verification Information for use Instructions General Information for use Information for maintenance Marking of the work platform Other marking information Marking for residual risks Marking of lift points Marking of tie-down points...9 Annex A (informative) List of significant hazards Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC
4 Foreword This document (pren :2013) has been prepared by Technical Committee CEN/TC 150 Industrial trucks - Safety, the secretariat of which is held by BSI. This document is currently submitted to the second CEN Enquiry. This document will supersede EN 1459:1998+A3:2012. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 1459 consists of the following parts, under the general title Rough-terrain trucks Safety requirements and verification: Part 1: Variable-reach trucks Part 2: Rotating trucks Part 3: Additional requirements for variable-reach trucks fitted with work platform Part 4: Additional requirements for variable reach trucks handling freely suspended loads Part 5: Additional requirements for attachments and attachment interface 3
5 Introduction This document is a type-c standard as stated in EN ISO The machines concerned and the extent to which hazards, hazardous situations or hazardous events are covered as indicated in the Scope of this document. When requirements of this type-c standard are different from those which are stated in type-a or B standards, the requirements of this type-c standard over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-c standard. Acknowledging that, at the time of publication, the requirements included in this European Standard do not represent the state of the art, a transition period of 18 months is permitted after the date of publication, such that manufacturers can develop their products sufficiently to meet the requirements of this European Standard 4
6 1 Scope This European Standard specifies the additional safety requirements for trucks covered by EN 1459+A3: Self-propelled variable-reach trucks EN : Rough-terrain variable reach trucks EN : Rough-terrain rotating trucks pren ISO : Industrial variable reach trucks when these trucks are equipped with work platform. This European Standard does not address hazards which may occur: a) during manufacture; b) when handling suspended work platforms which may swing freely; c) when using trucks on public roads; d) when operating in potentially explosive atmospheres; e) when operating underground; f) when using non-integrated work platforms. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 280, Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests pren , Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks pren , Rough-terrain trucks Safety requirements and verification Part 2: Rotating trucks EN 12895, Industrial trucks Electromagnetic compatibility pren ISO , Industrial trucks. Safety requirements and verification. Part 2. Self-propelled variable-reach trucks EN ISO 12100, Safety of machinery. General principles for design. Risk assessment and risk reduction EN ISO , Safety of machinery. Safety-related parts of control systems. General principles for design ISO 3287, Powered industrial trucks. Symbols for operator controls and other displays ISO 5053, Powered industrial trucks. Terminology 5
Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015
ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationSýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails
ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af
More informationSýnishorn Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur
More informationSýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts
ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur
More informationSýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics
ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands
More informationSýnishorn Specification for mortar for masonry - Part 2: Masonry mortar
ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði
More informationÍST EN :2013. Gildistaka ICS: 75.2
ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private
More informationSýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationSýnishorn Windows and doors - Watertightness - Test method
ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationSýnishorn General requirements for components used in drains and sewers
ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1459-3:2015 Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform EVS-EN 1459-3:2015 EESTI STANDARDI
More informationSýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules
ÍST EN 61936-1:2010 Gildistaka 25.2.2011 ICS: 29.02 Tók við af ÍST 170:2005, sjá einnig ÍST EN 50522:2010 Power installations exceeding 1 kv a.c. - Part 1: Common rules Staðfestur af Staðlaráði Íslands
More informationSýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard
ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation
More informationSýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux
More informationEnglish Version. Daylight of buildings
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity
More informationOffice furniture - Office work chair - Part 2: Safety requirements
Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN
More informationSýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
ÍST EN 13823:2010+A1:2014 Gildistaka 1.3.2015 ICS: 13.22 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item Staðfestur
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationMedical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationEnglish Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium
More informationILNAS-EN 62560:2012/A1:2015
ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationSýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components
ÍST EN 45545-2:2013 Fellur úr gildi 30.8.2013 ICS: 13.22 Búnaður til notkunar við járnbrautir - Eldvarnir í járnbrautarvögnum - Hluti 2: Kröfur varðandi hegðun efna og íhluta í eldi Railway applications
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationEnglish Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationCylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors- Connecting dimensions - Part 1: Oil burner pumps Atomizing oil burners - Oil burner pumps and oil burner
More informationSANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load
More informationIrish Standard I.S. EN :2009
Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document
More informationBitumen and bituminous binders - Specifications for paving grade bitumens
Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009
More informationILNAS-EN 1845:2007. Footwear manufacturing machines - Footwear moulding machines - Safety requirements
Footwear manufacturing machines - Footwear moulding machines - Safety requirements Machines pour la fabrication de chaussures - Machines de moulage pour chaussures - Prescriptions de sécurité Maschinen
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 14960-1 January 2019 ICS 97.190; 97.200.50 Will supersede EN 14960:2013 English Version Inflatable play equipment - Part 1: Safety
More informationNational foreword. Text affected
PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 12977-1 April 2010 ICS 27.160 Supersedes ENV 12977-1:2001 English Version Thermal solar systems and components - Custom built
More informationBitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted
More informationOperation of electrical installations -- Part 1: General requirements
Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 16510-2-2 January 2016 ICS 97.100.30 Will supersede EN 13229:2001 English Version Residential solid fuel burning s - Part 2-2: Inset
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationNational foreword. Compliance with a British Standard cannot confer immunity from legal obligations.
BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 15500-1:2017. It supersedes BS EN 15500:2008, which is withdrawn. The UK participation in its preparation was entrusted
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13232-4:2005 Raudteealased rakendused. Rööpad. Riströöpad ja pöörangud. Osa 4: Aktiveerimine, lukustamine ja avastamine Railway applications - Track - Switches and crossings - Part
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 13476-2 November 2017 ICS 23.040.01; 93.030 Will supersede EN 13476-2:2007 English Version Plastics piping systems for non-pressure
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15417:2006 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kw but not exceeding 1000 kw Gas-fired central
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 54-32 July 2015 ICS 13.220.20; 13.320 English Version Fire detection and fire alarm systems - Part 32: Planning, design,
More informationGas meters - Additional functionalities
Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14073-2:2004 Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 2: Safety requirements EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15182-1:2007 Hand-held branchpipes for fire service use - Part 1: Common requirements Hand-held branchpipes for fire service use - Part 1: Common requirements EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1004:2005 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements Mobile access and working towers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14175-6:2006 Fume cupboards - Part 6: Variable air volume fume cupboards Fume cupboards - Part 6: Variable air volume fume cupboards EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationFurniture - Children's cots and folding cots for domestic use - Part 2: Test methods
Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law. EN 716-2:2008/A1:2013
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods EVS-EN 14468-2:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13832-2:2006 Kemikaalide ja mikroorganismide eest kaitsvad jalatsid. Osa 2: Kemikaalide pritsmete eest kaitsvad jalatsid Footwear protecting against chemicals - Part 2: Requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12899-2:2007 Vertikaalsed püsiliikluskorraldusvahendid. Osa 2: Seest valgustatavad piirdetulbad Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1051-2:2007 Ehitusklaas. Klaasplokid ja klaasist sillutiskivid. Osa 2: Vastavushindamine Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/product
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods
More informationILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide
ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden
More informationHot rolled flat products made of high yield strength steels for cold forming
ÖNORM EN 10149-2 Edition: 2013-11-01 Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels Warmgewalzte
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15154-2:2006 Emergency safety showers - Part 2: Plumbed-in eye wash units Emergency safety showers - Part 2: Plumbed-in eye wash units EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment Non-destructive testing - Ultrasonic testing
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 60079-30-2:2007 Explosive - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Explosive - Part 30-2: Electrical resistance
More informationWater-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-7 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-18 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation
More informationEN ISO ÖNORM. Edition: (ISO 14937:2009)
ÖNORM EN ISO 14937 Edition: 2010-03-15 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13832-3:2006 Kemikaalide ja mikroorganismide eest kaitsvad jalatsid. Osa 3: Kemikaalide eest tugevat kaitset pakkuvad jalatsid Footwear protecting against chemicals - Part 3: Requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13843:2009 Roller sports equipment - Inline-skates - Safety requirements and test methods EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 13843:2009 sisaldab
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14438:2007 Gaasküttega küttekaminasüdamikud enam kui ühe ruumi kütteks Gas-fired insets for heating more than one room EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 419-2:2006 Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use
More information