Guideline No.: S-02(201510) S-02 Navigation Light and Signal Light Controllers. Issued date: October 20,2015. China Classification Society
|
|
|
- Gervase Gordon
- 5 years ago
- Views:
Transcription
1 Guideline No.: S-02(201510) S-02 Navigation Light and Signal Light Controllers Issued date: October 20,2015 China Classification Society
2 Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing criteria related to classification and statutory survey of marine products. This Guideline is published and updated by CCS and can be found through Comments or suggestions can be sent by to ps@ccs.org.cn. Historical versions and release date : Main changes and effective date:
3 CONTENTS 1 Application Basis for approval and inspection Definitions Drawings and documentation to be submitted Design and technical requirements Type test Unit/batch inspection / 9
4 Navigation Light and Signal Light Controllers 1 Application This guideline is applicable to the approval and inspection of navigation light controllers installed and used on ships engaged in international voyage. Reference may be made to this chapter for navigation light controllers installed and used on ships navigating in inland waterways and the signal light controllers installed on ships nagged in international voyage and navigating in inland waterways. 2 Basis for approval and inspection , Section 7, Chapter 2, PART FOUR of CCS Rules for Classification of Sea-going Steel Ships 2.2 Annex to MSC.253(83) Performance Standards for Navigation Lights, Navigation Light Controllers and Associated Equipment 2.3 Chapter 13, Volume 2B of Code for Statutory Inspection of Ships and Offshore Installations 2.4 IEC60945:2002Navigation and Radio Communication Equipment and Systems-General Requirements-Methods of Testing and Required Test Results. 3 Definitions 3.1 Navigation light &signal light controller is a device capable of operating and controlling the navigation light and signal light. 3.2 The terms and definitions used in this chapter are consistent with those in MSC.253(83). 4 Drawings and documentation to be submitted 4.1 The following drawings and documentation to be submitted are to be submitted to CCS for approval General drawing; Shell drawing (including panel drawing, bottom plate drawing, etc.); Panel arrangement plan; Signs and marks diagram; Electrical circuit diagram List of elements and components (including the name, type, specification, quantity, manufacturer or brand of the elements and components as well as their codes in electrical circuit); Product technical specifications or enterprise standard. 4.2 The following drawings and documentation to be submitted are to be submitted to CCS for review: Instructions for use (both in Chinese and English); Process flow chart showing quality monitoring points; 4 / 9
5 4.2.3 Type, specification and list of qualified suppliers of main raw materials and parts (e.g. integrated circuit chip, printed circuit board, semi-conductor element, fuse, switch, power module, light emitting diode, printed product, insulation paint, etc.); External wiring diagram; Software description (including programming platform, software type, software version, etc., applicable to products with programmable elements); Software flow chart/program block diagram (applicable to products with programmable elements). 5 Design and technical requirements 5.1 Navigation light and signal light controllers are to be powered directly from the main switchboard and emergency switchboard; if an emergency source of power is provided, navigation light and signal light controllers are to be powered from the emergency switchboard and temporary emergency charging and discharging panel. Navigation light and signal light controllers are to have the function of main power failure alarm and power source change over. 5.2 Navigation light and signal light controllers are to have light testing function. 5.3 The failure of indicator light of navigation light and signal light controllers is not to cause extinction of the navigation light and signal light. 5.4 Navigation light and signal light controllers are to be such as to facilitate the on/off control of each navigation light and signal light. 5.5 Navigation light and signal light controllers are to provide visual indication of the on/off condition of the navigation light and signal light. 5.6 Navigation light and signal light controllers are to provide setting of pre-grouped navigation light and signal light. 5.7 Navigation light and signal light controllers on ships not less than 50m in length are to provide alarms of the following failures: Navigation light and signal light power failure; and Failure, including short circuit, of a lamp which is switched ON Navigation light and signal light controllers on board a ship not less than 50 m in length should present the status of all NLs in a logical presentation, meeting the requirements set out in resolution MSC.191(79), e.g., by symbol marks on a display All indicators of Navigation light and signal light controllers should be dimmable to ensure easy reading without disturbing the night vision of the Officer of the Watch. The brightness of a display, if fitted, of Navigation light and signal light controllers should be controllable Navigation light and signal light controllers are to support use of standard serial interface of the maritime navigation and communication system The NLC should have a bi-directional interface to transfer alarms to external systems and receive 5 / 9
6 acknowledgements of alarms from external systems. The interface should comply with the relevant international standards IEC If LED is used as the source for navigation light or signal light, the light controller is to comply with the requirements in 4.3 of the Annex to MSC.253 (83). 6 Type test A complete set of navigation light controller is to be sampled by the surveyor for type testand the type testis to be carried out at least in accordance with the test items listed in the table below: TYPE TEST ITEM TABLE Table 6 No. Test item Technical requirements Test method 1 Visual inspection CCSrules/enterprise standards/drawings Visual inspection 2 Function test 2.1 Main power failure alarm and power changeover function tests , Section 7, Chapter 2, PART FOUR of the Rules for Classification of Sea-going Steel Ships (2012); and 6 of Resolution MSC. 253(83) When the main power supply is disconnected, the system is to be capable of automatically changing over to the backup source of power and continuing to operate, and activate the visual and audible alarms at the same time. The alarm sound pressure level is to comply with of IEC60945: Failure of indicator light of controllers is not to cause extinction of the navigation light , Section 7, Chapter 2, PART FOUR of the Rules for Classification of Sea-going Steel Ships (2012) When the indicator light on any controller panel is disconnected or short circuited, the corresponding navigation light is still to operate properly. 2.3 Navigation light on/off 5.1, 5.2 and 5.5 of Resolution The on/off indicator lights of navigation light and condition indication MSC. 253 (83) controller are to be capable of turning on and off the corresponding navigation lights and correctly indicating the operating condition of each navigation light. 2.4 Controller dimming 5.6 of Resolution MSC. 253 (83) When the upper dimming knob (or push button) of the controller is adjusted, the brightness of various indicator lights is to vary accordingly. The indicator light, when adjusted to dim level, is not to affect the night vision of the officer. 6 / 9
7 Continued Table Navigation light broken of Resolution MSC. 253 Disconnection of any navigation light and its circuit fault alarm (83) circuit is to be capable of activating the controller s visual and audible alarms. The alarm sound pressure level is to comply with and of IEC60945:2002. The alarm is to meet the requirements of IMO A.1021(26). 2.6 Navigation light short of Resolution MSC. 253 Short circuit of any navigation light and its circuit fault alarm (83) circuit is to be capable of activating the controller s visual and audible alarms. The alarm sound pressure level is to comply with and of IEC60945:2002. The alarm is to meet the requirements of IMO A.1021 (26). 2.7 Alarm signal external 5.8 of Resolution MSC. 253 (83) IEC61162 transmission and answer signal receiving 2.8 Two-way serial communication interface test 5.7 of Resolution MSC. 253 (83) IEC Determination of alarm sound pressure level and of IEC60945: and of IEC60945:2002 4a Maximum steady-state power fluctuation test 7.1 and of IEC60945: and of IEC60945:2002 4b Power anomaly 7.2 and of IEC60945: and of IEC60945:2002 4c Transient power fluctuation test 7.3 and 10.7 of IEC60945: and 10.7 of IEC60945: / 9
8 Continued Table 6 4d Power failure test 7.4 and 10.8 of IEC60945: and 10.8 of IEC60945: Compass safe distance 11.2 of MSC. 253 (83) 11.2 of MSC. 253 (83) 6 Low temperature test 8.4 of IEC60945: of IEC60945:2002; IEC Edition 6.0 ( ), (test Ab is applicable to equipment without a heat radiating device; test Ad is applicable to equipment with a heat radiating device) 7 High temperature (dry heat) test 8.2 of IEC60945: of IEC60945:2002; IEC Edition 5.0 ( ), (test Bb is applicable to equipment without a heat radiating device; test Bd is applicable to equipment with a heat radiating device) 8 Alternate damp heat test 8.3 of IEC60945: of IEC60945:2002; IEC Edition 3.0 ( ) 9 Vibration test (sine) 8.7 of IEC60945: of IEC60945:2002; IEC Edition 7.0( ) Test Fc 10 Electromagnetic compatibility test 10.1 Immunity to electrostatic discharge 10.9 of IEC60945: of IEC60945:2002; IEC Consolidated Edition 2.0( ) 10.2 Immunity to radiated radiofrequencies 10.4 of IEC60945: of IEC60945:2002; IEC Edition 3.1 ( ) 10.3 Immunity to conducted 10.3 of IEC60945: of IEC60945:2002; IEC radio frequency disturbance Consolidated Edition 3.0( ) 8 / 9
9 Continued Table Immunity to fast transients on a.c. power, signal and control lines 10.5 of IEC60945: of IEC60945:2002; IEC Edition 2.0 ( ) 10.5 Immunity to surges on a.c. power lines 10.6 of IEC60945: of IEC60945:2002; IEC Edition 2.0 ( ) 10.6 Radiated emissions from enclosure port 9.3 of IEC60945: of IEC60945:2002; CISPR Conducted emissions 9.2 of IEC60945: of IEC60945:2002; CISPR Unit/batch inspection 7.1 After CCS type approval certificate has been obtained, the manufacturer is to carry out unit/batch inspection of each navigation light controller and submit the manufacturer inspection test report. CCS surveyor will inspect unit by unit. 7.2 Unit/batch inspection items are to include at least the following: visual inspection, inspection of appearance, identification and process,, voltage withstanding test and insulation resistance measurement. 9 / 9
E-16 Main Engine Remote Control System
Guideline No.E-16 (201510) E-16 Main Engine Remote Control System Issued date: 20 October, 2015 China Classification Society Foreword This Guide is a part of CCS Rules, which contains technical requirements,
E-17 Flammable Gas Detection and Alarm System
Guideline No.E-17 (201705) E-17 Flammable Gas Detection and Alarm System Issued date: May 9, 2017 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
F-03 FIXED FIRE DETECTION AND FIRE ALARM SYSTEM
Guideline No.: F-03(201605) F-03 FIXED FIRE DETECTION AND FIRE ALARM SYSTEM Issued date: May 31,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical
E-20 COMPARTMENT FLOODING WATER LEVEL DETECTORS (INCLUDING SENSORS)
Guideline No.: E-20(201510) E-20 COMPARTMENT FLOODING WATER LEVEL DETECTORS (INCLUDING Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains
SOUND RECEPTION SYSTEM
STANDARD FOR CERTIFICATION No. 2.9 SOUND RECEPTION SYSTEM APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and independent foundation
Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME NO. 844.40 - MED A1/4.20-4.21-4.22-4.9 Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch FEBRUARY 2012
L-08 LIFEBOAT RELEASE MECHANISM
Guideline No.:L-08(201510) L-08 LIFEBOAT RELEASE MECHANISM Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements,
SIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
STANDARD FOR CERTIFICATION No. 2.9 SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and
Guideline No.: C-02(201510) C-02 FIRE DOORS. Issued date: October 20,2015. China Classification Society
Guideline No.: C-02(201510) C-02 FIRE DOORS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
GROUNDING AVOIDANCE SYSTEM (GAS)
STANDARD FOR CERTIFICATION No. 2.9 GROUNDING AVOIDANCE SYSTEM (GAS) JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent
C-01 FIRE DECKS AND BULKHEADS
Guideline No.: C-01(201510) C-01 FIRE DECKS AND BULKHEADS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
Rules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 7 Test Requirements for Statical Converters with Semi-Conductors Edition
M-20 Oil Mist Concentration Detection and Alarm Device
Guideline No.M-20 (201510) M-20 Oil Mist Concentration Detection and Alarm Device Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-504 Third edition 2001-03 Electrical installations in ships Part 504: Special features Control and instrumentation Installations électriques à bord des navires Partie 504:
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
OFFSHORE SUPPORT VESSELS 2014
RULES FOR BUILDING AND CLASSING OFFSHORE SUPPORT VESSELS 2014 NOTICE NO. 1 JULY 2014 The following Rule Changes were approved by the ABS Rules Committee on 28 May 2014 and become EFFECTIVE AS OF 1 JULY
AO Annunciator Module
General Specifications GS48C43Z01-00E-N AO-543-01 Annunciator Module GENERAL Figure 1 This module has two independent annunciator circuits. The circuits handle fault signals and operator actions (acknowledge,
DNVGL-CP-0398 Edition December 2015
CLASS PROGRAMME Type approval DNVGL-CP-0398 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
Audible warning devices for external alarm
VdS SCHADENVERHÜTUNG VdS Publisher: Gesamtverband der Deutschen Versicherungswirtschaft e.v. (GDV) Büro Schadenverhütung Publishing house: VdS Schadenverhütung Rules for Intruder Alarm Systems Audible
ClassNK Technical Information No. TEC-0838 (iii) The dormant period, visual indication, first stage audible alarm, second stage remote audible alarm a
Subject Implementation of Bridge Navigational Watch Alarm System (BNWAS) (Excluding Japanese-flagged ships) To whom it may concern Technical Information No. TEC-0838 Date 8 December 2010 Paragraphs 2.2.3
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62052-11 First edition 2003-02 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment This English-language version is
Notice on the implementation of the amendments to the FSS Code in resolution MSC.339(91)
C C S 通函 Circular China Classification Society (2013) Circ.111 /Total No.397 25/07/2013 (total pages:18) To relevant departments of CCS Headquarters, Shanghai Rules and Research Institute, plan approval
RULES PUBLICATION NO. 35//P ONE MAN BRIDGE OPERATED (OMBO) SHIPS March
RULES PUBLICATION NO. 35//P ONE MAN BRIDGE OPERATED (OMBO) SHIPS 2017 March Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or extend the Rules and are mandatory
IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
REA 105 Arc Protection Module. Operator s Manual
REA 105 1MRS 751005-MUM Issued: 20.04.1998 Version: B2/26.5.2000 Checked: Approved: REA 105 We reserve the right to change data without prior notice. Contents: 1. General...4 1.1. Features...4 2. Safety...5
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60694 Edition 2.2 2002-01 Edition 2:1996 consolidated with amendments 1:2000 and 2:2001 Common specifications for high-voltage switchgear and controlgear standards IEC 2002 Copyright
Supplementary type approval testing of Selco modules
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 19 Supplementary type approval testing of Selco modules Performed for Selco A/S DANAK-198611 Project no.: A504377-1 Page 1 of 20
GL-001. CIRM Guideline PERFORMANCE TEST PROCEDURE FOR ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) Edition 1.
CIRM Guideline GL-001 PERFORMANCE TEST PROCEDURE FOR ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) Edition 1.0 September 2018 Comité International Radio-Maritime (CIRM) 202 Lambeth Road, London,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60044-7 First edition 1999-12 Instrument transformers Part 7: Electronic voltage transformers This English-language version is derived from the original bilingual publication
Operation and use. Functions and characteristics
Operation and use Function Vigirex relays measure the earth-leakage current in an electrical installation via their associated toroids. Vigirex relays may be used for: b residual-current protection (RH10,
Type 8001 PRIME MOVER CONTROLS INC. ALARM ANNUNCIATOR TYPE8001 FEATURES SB 8001B
PRODUCT BULLETIN SB 8001B Type 8001 ALARM ANNUNCIATOR TYPE8001 FEATURES 16 or 32 alarm points per flush mount enclosure Displays are backlit with long life LEDs and engraved to suit Dimmer controls built
EU RO Mutual Recognition Technical Requirements
Adoption 1 April 2016 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 6. APPROVAL DATE AND REVISION NUMBER... 7 7. BACKGROUND INFORMATION
This document is a preview generated by EVS
IEC 60092-504 Edition 4.0 2016-09 REDLINE VERSION colour inside Electrical installations in ships Part 504: Special features Automation, control and instrumentation IEC 60092-504:2016-09 RLV(en) THIS PUBLICATION
SECTION AUTOMATIC TRANSFER SWITCHES
SECTION 26 36 23 AUTOMATIC TRANSFER SWITCHES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. General provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Technical Specification PILATUS 100K Detector System
Technical Specification PILATUS 100K Detector System Vesion 1.0 Table of Contents 1 Document History...4 1.1 Changes...4 2 Technical specifications...5 2.1 Technical data...5 2.2 Normal operation...6 2.3
CLM-SERIES SOLID STATE POWER CONTROLLER. Product Highlights: Model Numbers:
CLM-Series - Solid State Power Controller - Overview CLM-SERIES SOLID STATE POWER CONTROLLER The CLM-Series is a 12 output, solid state power controller. It provides fast switching with low loss solid
STANDARDS UPDATE NOTICE (SUN) ISSUED: August 23, 2017
STANDARDS UPDATE NOTICE (SUN) ISSUED: August 23, 2017 STANDARD INFORMATION Standard Number: UL 412 Standard Name: Refrigeration Unit Coolers Standard Edition and Issue Date: 5 th Edition Dated August 22,
CLM-SERIES SOLID STATE POWER CONTROLLER. Product Highlights: Model Numbers:
CLM-Series - Solid State Power Controller - Overview CLM-SERIES SOLID STATE POWER CONTROLLER The CLM-Series is a 12 output, solid state power controller. It provides fast switching with low loss solid
Technical Data Sheet BNWAS. Bridge Navigational Watch Alarm System. Technical Data Sheet. General Features
Technical Data Sheet BNWAS Bridge Navigational Watch Alarm System Technical Data Sheet General Features Technical Data Sheet Bridge Navigational Watch Alarm System (BNWAS) New SOLAS regulations require
ST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N POL 019 AMENDMENTS TO ANNEX V OF MARPOL CONVENTION TO: APPLICABLE TO: SHIPOWNERS, SHIPS OPERATORS AND MANAGERS, MASTERS, SURVEYORS TO FLAG
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62052-21 First edition 2004-05 Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control equipment IEC 2004 Copyright
RESOLUTION MSC.86(70) (adopted on 8 December 1998) ADOPTION OF NEW AND AMENDED PERFORMANCE STANDARDS FOR NAVIGATIONAL EQUIPMENT
MSC 70/23/Add.2 RESOLUTION MSC.86(70) STANDARDS FOR NAVIGATIONAL EQUIPMENT THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning
This is a preview - click here to buy the full publication
TECHNICAL REPORT IEC TR 60601-4-2 Edition 1.0 2016-05 colour inside Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical electrical equipment
ICS Regent. Fire Detector Input Modules PD-6032 (T3419)
ICS Regent Fire Detector Input Modules (T3419) Issue 1, March, 06 Fire detector input modules provide interfaces for 16 fire detector inputs such as smoke detectors, flame detectors, temperature detectors,
This is a preview - click here to buy the full publication INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL ELECTROTECHNICAL COMMISSION GUIDE 111 Second edition 2004-07 Electrical high-voltage equipment in high-voltage substations Common recommendations for product standards IEC 2004 Copyright
To Whom it May Concern;
Danfoss Drives 8800 W. Bradley Road Milwaukee, WI 53224 Phone: 800.621.8806 414.355.8800 Fax: 414.355.6117 www.danfossdrives.com To Whom it May Concern; The Trane variable frequency drive (VFD) is manufactured
VdS SCHADENVERHÜTUNG. VdS-Rules for Intruder Alarm Systems
VdS SCHADENVERHÜTUNG VdS Publisher: Gesamtverband der Deutschen Versicherungswirtschaft e.v. (GDV) Büro Schadenverhütung Publishing house: VdS Schadenverhütung. All rights reserved. VdS-Rules for Intruder
Guide Specification Model CTG Automatic Transfer Switch
Guide Specification Model CTG Automatic Transfer Switch PART 1 GENERAL 1.1 Scope A. It is the intent of this specification to secure a transfer switch that has been prototype tested, factory built, production
IACS RESOLUTION CHANGES (GMO ) BEKİR SITKI TÜRKMEN
IACS RESOLUTION CHANGES (GMO - 10-12- 2015) BEKİR SITKI TÜRKMEN Resolution Changes January & July 2016 (UR, UI, PR, REC) 3+ 1 1 + 0 0 + 7-10 1 + 5 Total UR Changes = 9 (Jan 2016) + (28 10) (July 2016)
APRIL 2010 ELECTRICAL EQUIPMENT STANDARD FOR CERTIFICATION DET NORSKE VERITAS. No. 2.9 Type Approval Programme No
STANDARD FOR CERTIFICATION No. 2.9 Type Approval Programme No. 6-800 ELECTRICAL EQUIPMENT APRIL 2010 DET NORSKE VERITAS Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11
***** 2. Rev.1 is to be uniformly implemented by IACS Members from 1 July 2004.
(Sept 2003) (Rev.1 May 2004) (Rev.2 Nov 2005) (Rev.3 Mar 2012) Hold, ballast and dry space water level detectors (Chapter II-1/25 and Chapter XII/12) and Performance Standards for Water Level Detectors
Laboratory Honeywell Technology Solutions, Bangalore-EMC Lab, 19/2, Devarabisanahalli Village, K.R. Puram, Varthur Hobli, Bangalore, Karnataka
Last Amended on 07.10.2015 Page 1 of 18 I. EMC Test Facility 1. Electrical and Electronic Products, Process Control Devices, Lighting Control Products, Sensing and Control Devices, Electromechanical Products,
Technical Manual. Level Alarm Unit CARLA & WIDS
CARLA & WIDS Technical Manual SAS au Capital de 2 158 244-444 871 933 R.C.S. Bourges - APE : 2651B Headquarter : 9, rue Isaac Newton - 18000 Bourges - France Technical Manual CARLA for Tankers Cargo Tanks
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu
COMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ARTESYN PRODUCT TESTING SERVICES 2900 South Diablo Way, Suite 190 Tempe, AZ 85282 Tom Tuttle Phone: 602 228 7869 Email: tom.tuttle@artesyn.com ELECTRICAL (EMC)
This document is a preview generated by EVS
IEC 61000-6-2 Edition 3.0 2016-08 REDLINE VERSION colour inside Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity standard for industrial environments IEC 61000-6-2:2016-08 RLV(en)
Notice No. 7. Rules and Regulations for the Classification of Ships, July Issue date: March Working together for a safer world
Notice No. 7 Rules and Regulations for the Classification of Ships, July 2014 The status of this Rule set is amended as shown and is now to be read in conjunction with this and prior Notices. Any corrigenda
Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH
Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH Manufacturer: Redsense Medical AB Gyllenhammars väg 26 302 92 HALMSTAD SWEDEN www.redsensemedical.com These instructions are
Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
Compliance Engineering Ireland Ltd
Clonross, Dunshaughlin, Co. Meath Testing Laboratory Registration number: 088T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration
ISO INTERNATIONAL STANDARD. Ships and marine technology Lowlocation lighting on passenger ships Arrangement
INTERNATIONAL STANDARD ISO 15370 First edition 2001-04-15 Ships and marine technology Lowlocation lighting on passenger ships Arrangement Navires et technologie maritime Éclairage situé en bas sur les
STS Directory Accreditation number: STS 0009
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Mettler-Toledo GmbH ENL Testing Laboratory Heuwinkelstrasse 3 8606 Naenikon SWITZERLAND Head: Bernhard Merk Responsible
Type approval testing of miscellaneous smoke and heat detectors for marine applications
We help ideas meet the real world DELTA Test Report TEST Reg. no. 19 Type approval testing of miscellaneous smoke and heat detectors for marine applications Performed for Consilium Marine AB DANAK-199842
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61514-2 First edition 2004-01 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs IEC 2004
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-1-2 2001 AMENDMENT 1 2004-09 Amendment 1 Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility Requirements
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-2 Edition 2.0 2012-03 Mobile and fixed offshore units Electrical installations Part 2: System design INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 47.020.60
Electromagnetic compatibility (EMC)
Electromagnetic compatibility (EMC) Relevant standards for commercial cleaning machines Contents Foreword......................................... 2 Introduction.......................................
DNVGL-CP-0407 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0407 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
Technical Information
Subject Installation of VDR and AIS on Greek Flag Ships To whom it may concern Technical Information No. TEC-0586 Date 14 June 2004 In relation to the installation of VDR systems and AIS systems on Greek
ACMA mandated EMC standards
Part 1 Generic standards Item No. Applicable Standard Full Title of Standard Publication Date equipment type Standard being replaced AS/NZS 61000.6.3: 2012 30/04/2012 AS/NZS 61000.6.3: 2007 14/10/2015
www. ElectricalPartManuals. com Annunciator unit Features Self-contained microprocessor-based annunciator unit with 64 alarm channels Application
Features Self-contained microprocessor-based annunciator unit with 64 alarm channels pplication larm channels activated by normally open or normally closed contact Small and large stand-alone annunciator
Universal fault annunciator for panel mounting
Universal fault annunciator for panel mounting Communication over Ethernet USM - Universal-fault annunciator for panel mounting Low depth housing for panel mounting Versions with 8, 16, 32 or 48 inputs
AS/NZS IEC :2016
AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 23551-1 Second edition 2012-08-15 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves Dispositifs
Model LTN-3R Outdoor Rated Uninterruptible Power System Single Phase
Model LTN-3R Outdoor Rated Uninterruptible Power System Single Phase General Specification 550 VA/Watts 1300 VA/Watts 1.0 GENERAL This specification defines the electrical and mechanical characteristics
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, 200 070, People's Republic of China Testing Location:
C-Bus Neo Range Installation Instructions. 5050NL Series
C-Bus Neo Range Installation Instructions 5050NL Series Table of Contents Section...Page 1.0 Product Range... 3 2.0 Description... 3 3.0 Installation Procedure... 4 3.1 Installation Location... 4 3.2 Installing
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright
This document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60601-4-2 Edition 1.0 2016-05 colour inside Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical electrical equipment
Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
TEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance
Test Report issued under the responsibility of: SGS- CSTC TEST REORT Safety of household and similar electrical appliances art 2: articular requirements for massage appliance Report Reference No....: GZES100800181503
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61000-4-3 Edition 2.1 2002-09 Edition 2:2002 consolidated with amendment 1:2002 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques
A T L A S - SolarClimatic Test Cabinet SC 2000 MHG
A T L A S - SolarClimatic Test Cabinet SC 2000 MHG A T L A S - SolarClimatic Type Test chamber capacity SC 2000 MHG approx. 3400 l Radiation area approx. 1.36 m 2 TECHNICAL DATA Characteristic values for
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE ENGINEERING PTY LTD 90 Indian Drive Keysborough, Victoria 3173, AUSTRALIA Mr. Simon Grilj Phone: 61 3 9763 3079 Email: simon@compeng.com.au ELECTRICAL
IMO MSC 94 Summary Report on Polar Code
IMO MSC 94 Summary Report on Polar Code London, 17-21 November BUREAU VERITAS Marine & Offshore Division Compliance & Regulations 2. Revision of SOLAS chapter II-1 subdivision and damage stability regulations
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-1 Fifth edition 2005-11 Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions This English-language version
C 271/32 Official Journal of the European Union
C 271/32 Official Journal of the European Union 12.11.2003 Commission communication in the framework of the implementation of the Council Directive 89/336/EEC (2003/C 271/04) (Text with EEA relevance)
C e r t i f i c a t e
C e r t i f i c a t e of EC Type-examination (Module B) Certificate Nº: 09212007/AA/01 Product Category: A.1/5.13 With respect to Marine Equipment Directive 96/98/EC and the amending Directive 2008/67/EC,
RESOLUTION MSC.145(77) (adopted on 5 June 2003) PERFORMANCE STANDARDS FOR WATER LEVEL DETECTORS ON BULK CARRIERS
MSC 77/26/Add.1 RESOLUTION MSC.145(77) THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING
ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly
INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour
THE HIGH STAIRWELL AND PASSAGEWAY FIXTURE PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Luminaire Series for Stairwells, Bathrooms, Passageways, and General Illumination KEY FEATURES INCLUDE: Multiple Color Options Three color options ensure that the new lighting
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62603-1 Edition 1.0 2014-05 colour inside Industrial process control systems Guideline for evaluating process control systems Part 1: Specifications INTERNATIONAL ELECTROTECHNICAL
MSC Guidelines for Watermist Fire Suppression Systems Procedure Number: E1-03 Revision Date: 02/16/2017
Procedure Number: E1-03 Revision Date: 02/16/2017 References: S. T. Brady, CDR, Chief, Engineering Division a. National Fire Protection Association (NFPA) 750, 1996 Edition, Standard on Water Mist Fire
Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium