FC2020 Fire control panel

Transcription

1 FC2020 Fire control panel Series FS20 (MP4.0) Sinteso Compact, prefabricated, microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as stand-alone version or networked Up to 64 stations (fire control panels and fire terminals) can be connected in one network Integrated emergency operation function Redundant network node, degrade operation according to EN 54 Fast Ethernet interface for heterogeneous network Integrated user-friendly operating unit Optional printer, key switch, LED indicators Slots for RS232, RS45 serial ports Emergency power supply for up to 72 h emergency power time Recognition and automatic read-in (auto configuration) of all FDnet devices, providing immediate simple operation Processes signals from the Sinteso detector series Time and situation-dependent change over of the detector parameters Floor repeater devices, alarm devices and mimic displays in the detector loop (FDnet) Flexible programming of complex applications and controls Stored data can be uploaded via remote access Firmware download of all processor controlled control panel components

2 avoid electrostatic charging! avoid electrostatic charging! System overview Repeater FN2002 FC2020 FCnet/SAFEDLINK FC2020 Fire control panel FT2040 SintesoWorks, SintesoView FT20 DM0x DT0x-Ex Explosionhazard area DO0-Ex FDL24-9 FDT22 FDS229 FDCI222 SB3 4 inputs FDSB29 FDOOTC24 4 outputs Detection line GMT detectors Siemens or TM Synova SynoLINE300 or FDO2x FDSB22 / FDSB229 24VDC ext. FDCIO223 2 in-/outputs optionally FDnet 2 (4) loops max. 252 addresses FT200 Floor repeater terminal FDT24 FDOOT24-9 stub line FDF2x-9 FDCL22 FDV24 24V FDCIO222 FDCW24 LaserFocus VLF-250/-500 Transmission of an alarm signal Transmission of a fault signal via FCI2007-A Camera Video Fire Controller Fire controls via FCI200-A Conventional horn line via FCI2009-A FC0 or XC0 FDM22x FDCIO222 FDS22 4 inputs FDM22x Mimic display FT200-A 24VDC ext. possible FDOOT27 Radio detectors Fire detection or Extinguishing control unit collective 2

3 Networking topologies Up to 32 fire control panels und fire control terminals can be connected in a single cluster (FCnet/SAFEDLINK) or up to 6 stations when the cluster is connected to a danger management system. Using a fiber-optic Backbone (FCnet/LAN) up to 4 of the above mentioned clusters (with up to 6 stations each) can be networked. The entire network may contain up to 64 stations. For details about system networking, please refer to product data sheet

4 Characteristics The FC2020 is a compact fire control panel with an integrated operating unit that can process signals from Sinteso devices. The control panel can be used as a stand-alone unit or in a network. Using the user-friendly engineering tool SintesoWorks, the control panels can be configured to create a customized solution. All detector lines are monitored for ground faults. Adaptation of the user text directly on the terminal or with the software engineering tool. Up to 2000 events can be stored and recalled according to various criteria. Automatic daylight saving time switchover. Connection to Siemens Danger Management System Functional elements Operating unit The following are located on the operating unit: CPU module and the electronics for the operating unit Ethernet connection Slots for RS232, RS45 modules and networking modules (SAFEDLINK) Space for 'Kaba' or 'Nordic' key switch Space for event printer (for FC2020-AZ/-AA/-AE) Periphery board The following are located on the periphery board: Connection terminals for FDnet loops, remote transmission (alarm, fault), horn output, programmable control inputs/outputs, monitored alarm and fault output, degrade supply, power supply Plug-in position for loop extension (FDnet) Power supply 70 W or 50 W, emergency power supply Provides the hardware with the necessary power and charges the batteries The batteries supply emergency power in case of mains failure Housing A pivoting mounting panel can be installed on the housing backplane to allow installation of: fire brigade periphery module sounder module (can also be mounted onto the U-rail TS35) Configuration The engineering tool (SintesoWorks) permits the system to be adapted to specific customers' requirements. Application ranges The FC2020 is ideally suited for smaller applications, e.g. in workshops, hotels, etc. or when networked as part of much larger applications. Operation Each control panel has an integrated operating unit. The control panel can also be operated from a separate FT2040 operator terminal or any other control panel. For details and further information, please refer to product data sheet

5 Overview of FC2020 fire control panels Housing (Standard) Housing (Comfort) FC2020-AZ FC2020-EZ FC2020-AA FC2020-AE With 24 indicator groups With 4 indicator groups with each one red + yellow LED with each one red + yellow LED 2 Loops 2 Loops With power supply (70 W) With power supply (70 W) Battery capacity max. 2 Ah Battery capacity max. 2 Ah 2 Loops 2 Loops With power supply (50 W) With power supply (50 W) Battery capacity max. 26 Ah Battery capacity max. 26 Ah Expansion FTO200-A FH2007-A FH2003-A FH2005-A Event printer Housing (Std. +plan comp.) Housing (Comfort) Housing (Large) 430 x 39 x 60 mm 430 x 796 x 60 mm 430 x 796 x 260 mm Can be installed in FC2020-AZ FC2020-AA FC2020-AE RS232 module must be ordered separately Empty housing for documents A4, Depth 50 mm Empty housing for various applications FH2002-A FH2004-A Housing (Standard) Housing (Large extension) 430 x 39 x 60 mm 430 x 39 x 260 mm Empty housing for various applications e.g. for additional batteries, Space for larger batteries operating add-ons or 4 x FA2006-A (26 Ah) or event printer 4 x FA2007-A (45 Ah) or Space for batteries 2 x FA200-A (65 Ah) 2 x FA2003-A (7 Ah) or 2 x FA2004-A (2 Ah) or e.g. for additional batteries, Space for larger batteries 2 x FA2005-A (7 Ah) or 2 x FA2006-A (26 Ah) operating add-ons or 2 x FA2007-A (45 Ah) or event printer 2 x FA200-A (65 Ah) Space for batteries 2 x FA2003-A (7 Ah) or 2 x FA2004-A (2 Ah) Operating add-ons External printer FCM2006-A FCM2007-A DL indicator groups 96 indicator groups Matrix printer (Extern) with each one red + yellow LED with each one red + yellow LED RS232 interface For retrofitting For retrofitting RS232 module must be ordered separately 5

6 Configuration of FC2020 in housing (Standard) Basic equipment Designation Notes Rear (Standard) FHA2002-A 2 Periphery board (2-loop) FCI2002-A Nos. -5 > Basic equipment for each FC2020-xx (Standard) 3 Power supply (70 W) FP200-A 4 Mains terminals on DIN mounting rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM200x-xx Combined operating unit and CPU, incl. cover 6 Space for batteries 2 x 2 V / 7 2 Ah Expansion 7 Relay module Z3B7 Relay for fire controls Event printer FTO200-A For event logging 9 Key switch (Kaba) FTO2005-C Key switch (Nordic) FTO2006-B For operating access rights 0 Mounting plate FHA2007-A E.g. for fire brigade peripheral Loop extension (FDnet) FCI2003-A For loop extension of 2 to 4, number of addresses remains the same 2 RS45 module (isolated) FCA2002-A For peripheral devices with RS45 port 3 RS232 module (isolated) FCA200-A For stations with RS232 port 4 Networking module (SAFEDLINK) FN200-A For networking various stations 5 Repeater (SAFEDLINK) FN2002-A For the extension of the system bus FCnet, max. between 2 stations (mounting direct onto plane surface, onto a U-rail TS35 or in housings FDCH29/292) 6 Sounder module FCA2005-A For split-up of to 4 conventional horn lines 7 Battery (2 V, 7 Ah, VDS) FA2003-A Battery (2 V, 2 Ah, VDS) FA2004-A For emergency power supply Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 Battery kit (9 Volt) FCA200-F For 9 Volt battery (3 rd voltage source for France) 20 Lithium battery 9 V / Ah For FCA200-F 2 9" mounting kit FHA206-A For the installation in 3 rd party housings 22 FM blind HU FHA207-A For the recess mounting of housings 23 License key L or FCA202-A For SintesoView (Visualizer) License key (L2) FCA203-A For Management System (also includes SintesoView ) 24 Cable kit (communication) FCA204-A For flexible cable connections to the modules on the operating unit 6

7 Configuration of FC2020 in housing (Comfort) Basic equipment Designation Notes Rear (Comfort) FHA2003-A 2 Periphery board (2-loop) FCI2002-A Nos. -5 > Basic equipment for each FC2020-xx (Comfort) 3 Power supply (SV 24V-50 W) V24230-Z6-A4 4 Mains terminals on DIN mounting rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM200x-xx Combined system operating panel and CPU, incl. cover 6 Space for batteries 2 x 2 V / 7 26 Ah Expansion 7 Relay module Z3B7 Relay for fire controls Event printer FTO200-A For event logging 9 Key switch (Kaba) FTO2005-C Key switch (Nordic) FTO2006-B For operating access rights 0 Mounting plate FHA2007-A E.g. for fire brigade peripheral Loop extension (FDnet) FCI2003-A For loop extension of 2 to 4, number of addresses remains the same 2 RS45 module (isolated) FCA2002-A For peripheral devices with RS45 port 3 RS232 module(isolated) FCA200-A For stations with RS232 port 4 Networking module (SAFEDLINK) FN200-A For networking various stations 5 Repeater (SAFEDLINK) FN2002-A For the extension of the system bus FCnet, max. between 2 stations (mounting direct onto plane surface, onto a U-rail TS35 or in housings FDCH29/292) 6 Sounder module FCA2005-A For split-up of to 4 conventional horn lines Battery (2 V, 7 Ah, VDS) FA2003-A 7 Battery (2 V, 2 Ah, VDS) FA2004-A For emergency power supply Battery (2 V, 26 Ah, VDS) FA2006-A 7

8 Fire brigade periphery module FCI200-D For Germany (FBF, FSD, ÜE, FSE, ÖA, KL) 9 Battery kit (9 Volt) FCA200-F For 9 Volt battery (3 rd voltage source only for France) 20 Lithium battery 9 V / Ah For FCA200-F 2 9" mounting kit FHA206-A For the installation in 3 rd party housings 22 FM blind 2HU FHA205-A For the recess mounting of housings 23 License key L or FCA202-A For SintesoView (Visualizer) License key (L2) FCA203-A For Management System (also includes SintesoView ) 24 Cable kit (communication) FCA204-A For flexible cable connections to the modules on the operating unit 25 Power supply kit (50 W, B) FP2005-A For additional power supply Technical data FC2020 in housing (Standard) FC2020 in housing (Comfort) Mains voltage AC V AC 9 27 V / AC V Power supply 70 W 50 W Operating voltage DC V DC V Operating current max. 2.5 A max. 5 A Battery capacity 2 x 2 V, 7 2 Ah 2 x 2 V, 26 Ah Battery monitoring yes yes Mains monitoring yes yes Connectable detector series Sinteso (FDnet) Sinteso (FDnet) Number of lines Loops (with loop extension) or Stub lines 2 (4) 4 () 2 (4) 4 () Number of addresses max. 252 max. 252 Integrated inputs/outputs Relay output Remote transmission alarm Remote transmission fault Monitored outputs Alarm Fault Horn Free programmable inputs/outputs Operating unit integrated integrated Plug-in position for serial interfaces RS232, 2 2 RS45 Plug-in position for network module 2 2 Plug-in position for loop extension Mounting place for cable kit (communication) 2 Sounder module max. max. Ethernet connection RJ45 Operating temperature C C Storage temperature C C Humidity (no condensation permitted) 95 % rel. 95 % rel. Dimensions (W x H x D) without cover cap with cover cap Color Housing Cover cap 430 x 39 x 60 mm 430 x 39 x mm grey, ~RAL 7035 white, ~RAL x 796 x 60 mm 430 x 796 x mm grey, ~RAL 7035 white, ~RAL 900 Protection category (IEC 60529) IP30 IP30 Approvals VdS LPCB G h/04 G h/04

9 FC2020 SV24V-50W Details for ordering Type Part no Designation Weight Fire control panels FC2020-AZ A5Q Fire control panel (2-loop) kg FC2020-EZ A5Q Fire control panel (2-loop) kg FC2020-AA A5Q Fire control panel (2-loop).250 kg FC2020-AE A5Q00065 Fire control panel (2-loop) kg Expansion Z3B7 BPZ: Relay module 250 VAC / 0 A ( relay) kg FTO200-A A5Q Event printer kg A5Q Replacement printer rolls (0 rolls) kg FTO2005-C A5Q00003 Key switch (Kaba) 0.03 kg FTO2006-B A5Q Key switch (Nordic) kg FHA2007-A A5Q00005 Mounting plate 0.00 kg FCI2003-A A5Q Loop extension (FDnet) kg FCA2002-A A5Q RS45 module (isolated) kg FCA200-A A5Q RS232 module (isolated) 0.06 kg FN200-A A5Q00025 Network module (SAFEDLINK) kg FN2002-A S24236-B2502-A Repeater (SAFEDLINK) 0.54 kg FCA2005-A A5Q Sounder module 0.40 kg FCA204-A A5Q Cable kit (communication) kg FCI200-D A5Q Fire brigade periphery module 0.42 kg FH2002-A A5Q00093 Housing (Standard) kg FH2007-A A5Q Housing (Std. +plan comp.) kg FH2004-A A5Q00077 Housing (Large extension).20 kg FH2003-A A5Q Housing (Comfort) kg FH2005-A A5Q Housing (Large) kg FCM2006-A A5Q Operating add-on (2xLED ind.) kg FCM2007-A A5Q Operating add-on (4xLED ind.) 2.00 kg FCA200-F A5Q Battery kit (9 Volt) (only France) 0.00 kg A5Q Lithium battery 9 V / Ah, for FCA200-F kg FHA206-A A5Q " mounting kit kg FHA207-A A5Q FM blind HU kg FHA205-A A5Q FM blind 2HU 5.00 kg Additional power supply FP2003-A A5Q Power supply kit (70 W) kg FP2004-A A5Q Power supply kit (50 W) for installation in.366 kg empty housing FP2005-A A5Q Power supply kit (50 W) for cascading.00 kg FN2006-A S54400-A6-A Fiber network module (SM) kg FN2007-A S54400-A62-A Fiber network module (MM) kg Networks (backbone) FN200-A S54400-F94-A Ethernet switch 0.00 kg FN2009-A S54400-F95-A Security module 0.00 kg FHA2029-A S54400-B79-A Mounting kit for Ethernet switch (Comfort) kg FHA2030-A S54400-B-A Mounting kit for Ethernet switch (Large Ext.) kg Batteries FA2003-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2004-A A5Q Battery (2 V, 2 Ah, VDS) kg FA2005-A A5Q Battery (2 V, 7 Ah, VDS) kg FA2006-A A5Q Battery (2 V, 26 Ah, VDS) kg FA2007-A A5Q Battery (2 V, 45 Ah, VDS) kg FA200-A A5Q Battery (2 V, 65 Ah, VDS) kg Software license FCA202-A A5Q00056 License key (L) 0.00 kg FCA203-A A5Q00057 License key (L2) 0.00 kg External printer DL3750+ A5Q Matrix printer (Extern) kg Spare part A5Q Black typewriter ribbon for printer DL kg 9

10 Siemens Switzerland Ltd Infrastructure & Cities Sector Division International Headquarters Gubelstrasse 22 CH-630 Zug Tel Copyright by Siemens Switzerland Ltd Data and design subject to change without notice. Supply subject to availability. Document no _n_en_-- Manual FS20 Edition Section