BIS - Overview and basic package V3.0

Transcription

1 Engineered Soltions BIS - Overview and basic package V3.0 BIS - Overview and basic package V3.0 Complete enterprise management for efficient, integrated bilding and secrity management in a single soltion Consistent se of world-wide open IT standards for configring, interfacing and displaying makes BIS extremely ser and installer friendly Provides even better integration of Bosch and 3rd party systems throgh OPC compliance Easily links alarm information to ser-defined actionplans and existing location maps Modlar strctre makes it easy to create a secrity soltion which best meets yor reqirements The bilding management system The Bilding Integration System (BIS) is a flexible bilding management system which can be configred to sit the ser's specific needs. It contains a hge range of applications and featres which enable both the integration and copling as well as the monitoring and control of all technical bilding systems. The new generation bilds on Bosch's many years of experience in management systems and was considerably inflenced by the following market trends: Increasing complexity of technical bilding eqipment The increasing complexity of technical eqipment inside bildings reqires a powerfl management system which combines the most varied fnctions (e.g. fire and intrsion alarm systems, access control, video systems and bilding atomation... etc.) in the best possible way. The OPC standard enables BIS to process and share information efficiently with a hge variety of hardware devices and other sorces. Using new technologies and standards While the strict reglations in the field of secrity technology ensre a high degree of reliability in secrity matters, they hinder the integrated se of new technologies from the IT world. BIS has scceeded in harnessing the benefits of non-secritybased technologies (e.g. OPC, CAD, web) and harmonizing them with the world of secrity technologies. Cstomers want complete soltions Facility managers and integrators are demanding a single bilding-management soltion that is nevertheless able to integrate all their secrity sbsystems. System overview The Bilding Integration System is a versatile prodct made p of a basic package pls varios optional components (also known as Engines) based on a common software platform. The engines can be combined to tailor bilding management systems to detailed reqirements. These main components are: Atomation Engine Access Engine Video Engine Secrity Engine

2 2 BIS - Overview and basic package V3.0 * not available in all contries These engines are described in greater detail in separate datasheets. Fnctions System architectre The BIS Engines provide fire and intrsion detection, access control, video srveillance and the monitoring of HVAC and other vital systems. BIS is based on a performance-optimized three-tier architectre especially designed for se in Intranet and Internet environments. Sbsystems are connected via the well-established world-wide OPC standard. BIS can operate on a standalone PC or in a networked client/server architectre. Organizational strctre and configration A nmber of atomatic fnctions and easy-to-se tools make the configration of BIS installer-friendly, saving time and expense. Hierarchical location trees can be created by the import of existing CAD data (standard DWF vector format) containing layers, named views and detector locations. Zooming and panning allow rapid navigation throgh the bilding. The BIS ser interface is web-server-based sing dynamic HTML pages. Defalt pages for different screen resoltions and formats are inclded in the installation software. BIS atomatically detects the monitor resoltion and provides the appropriate ser interface. The defalt pages can easily be cstomized sing a standard HTML editor. Existing configrations of OPC compliant sbsystems can be easily imported into BIS throgh this open interface standard. An OPC server can be installed on a PC anywhere in the network and BIS will connect to it. Operation The main task of BIS is to operate as the alarm, monitor and control center for the varios secrity systems within a site. Its graphical interface is designed to help the operator grasp the extent and rgency of an occrrence qickly, and to take prompt and effective action. 1. BIS server n Connection servers 2. Client network n OPC compatible devices n Clients 6. Database server The heart of the system, the State Machine, monitors all incoming events and operator reqests and takes those actions prescribed by ser-defined rles or Associations, ths nbrdening the operators. BIS client workstations reqire only Windows and the Internet Explorer. No local installation is necessary.

3 3 BIS - Overview and basic package V3.0 System secrity AES encryption between BIS central server and workstations provides additional secrity in addition to configrable ser-access rights. If PCs within a corporate network are to be sed as client workstations then enhanced secrity can be achieved by restricting operators to specific workstations or IPaddresses. Basic package The Bilding Integration System basic package provides many featres sed in common by the varios Engines. Cstomizable device condition conters to provide an overview of the condition of sbsystems across the entire BIS system Message processing and alarm display Alarm qee with p to 5000 simltaneos alarm events and detailed alarm information The logical strctre (e.g. bilding floor room) of a site is visalized as a tree that can be sed for graphical navigation, and where alarm conditions are indicated by colored spheres. Location tree can be generated atomatically from the "named views" within the AtoCAD graphic Action management for atomatic and manal control into connected sbsystems and their peripherals Device overview for all connected sbsystems, and their peripherals (detectors) and internal virtal devices (operator, server,...) in the form of a tree strctre with detailed information abot address, stats, type, location and notes. Control the peripherals via the context mens of their tree nodes. Fixed assignment of operators to workstations for higher secrity State machine for atomated event and alarm handling. Web-server-based platform allows connection of client workstation via jst the Internet Explorer Direct spport for location maps in standard AtoCAD DWF vector format redces configration effort. Ability to divide the system into atonomos Divisions, and to restrict operators to the control of specific Divisions. Ability to provide specific information to the operator in the form of miscellaneos hypertext docments, inclding text, bitmaps, video images, etc. Changes to architectre within a graphic (new walls, moving a door, etc.) can be implemented withot changing the BIS configration, simply import a new plot file. Atomated workflows with message distribtion and cstomizable escalation paths Hge library of standardized detector icons in standard vector format inclding color, event and control definitions Direct control of detectors via the context mens of their icons in the location maps Location overview with hyperlinks to photos, manals, instrctions Highly configrable operator access rights for monitoring and control of sbsystems and their peripherals Event log to ensre all events are completely docmented (inclding messages and controls) Reporting services to qickly create reports from the event log Linking and embedding of OPC servers from any compter in the network Online Help

4 4 BIS - Overview and basic package V3.0 BIS optional accessories The optional featres listed below can be added to the BIS system to meet specific cstomer reqirements. They are sable with all the BIS Engines (Atomation, Access, Video and Secrity Engine). This package extends the standard alarm handling of yor BIS system with the capability of displaying action plans and location maps as well as the graphical navigation and the alarm-dependent visalization of layers inside those maps. This ensres optimal gidance to operators especially in stress sitations, sch as fire or intrsion alarms. Alarm-dependent action plans or workflows provide detailed event-dependent information sch as standard operating procedres, live images, control bttons, etc. to the operator. Simply create and assign one action plan to each possible alarm type in yor system, e.g. fire alarm, access denied, technical alarms, etc. With the deletion of an alarm message an nmodifiable snapshot of the displayed action plan is attached to the event log. This ensres accontability by providing a trace of all steps performed by the operator dring the alarm response. This package extends the standard alarm-handling of yor BIS system by some additional featres: Message distribtion allows the definition of escalation scenarios which are activated atomatically when an operator or operator grop fails to acknowledge an alarm message within a defined period. BIS will then forward the message atomatically to the next athorized operator grop. The timer featre allows the setp of time schedles which can be sed to perform atomatic control commands, sch as closing a barrier at 8:00 pm, as well as for time-dependent redirection of alarm messages, e.g. within time period 1 show message to operator grop 1 else to operator grop 2. Location maps are a visalization of premises e.g. floors, areas or rooms, based on the poplar AtoCAD vector-graphics format. Detectors and other devices are represented by colored, animated icons that provide direct control via their context mens. In the case of an alarm BIS zooms atomatically to the location in the map where it was triggered. A location tree, which can be created atomatically, and the zoom/pan fnction allow synchronized graphical navigation within the bildings. Alarm-dependent layer control allows the display of additional graphical information for specific sitations, e.g. escape rotes in case of fire alarms.

5 5 BIS - Overview and basic package V3.0 The operator alarm featre allows an operator to trigger an alarm manally from the location tree, for example, if informed by telephone of a dangeros sitation. Sch manal alarms are processed in the same way as those triggered by a detector: that is, the associated docments are displayed and all steps taken are recorded in the event log. The application lancher allows the invocation of non- BIS applications by the system based pon predefined conditions, e.g. alarms or timers. A typical application of this wold be an atomatic reglar system backp. Installation/configration notes Bilding Integration System in figres Addresses, detectors, control elements, cameras etc. which can be processed in the entire system max. nmber of states nmber of events per second max. nmber of network printers in the integrated network Parts inclded Qty. Components 500,000 nlimited 500 (continos, with higher peaks) not limited by BIS 1 BIS Installation DVD incl. BIS platform, complete engine software and installation manals as PDF 1 Qick installation gide 1 License file Dongle key operator licence OPC server license Event log Message processing (basic alarm management) Technical specifications Minimm technical reqirements to be met by the BIS login or connection server Processor 3GHz CPU Single Core or higher 4 GB RAM 80 GB of free HD space DVD-ROM drive 100 Mbit network card (PCI) 1 free USB port for dongle Graphical adapter with 1280 x 1024, 32 k colors Windows Server 2008 R2, or Windows 7 (32 or 64 Bit, bt not Starter/Home Edition), or Windows Server 2003 (SP2, R2, 32 Bit), or Windows XP Professional SP3 (32 Bit) inclding IIS - Microsoft Internet Explorer 8 or 9 - Keyboard, mose Sbject to technical changes. Minimm technical reqirements to be met by the BIS client workstation PC Processor 3GHz CPU Single Core 4 GB RAM 20 GB of free HD space 100 Mbit Ethernet network card Graphical adapter with 1280 x 1024, 32 k colors Windows XP SP3 or Windows 7 (32/64 Bit) Microsoft Internet Explorer 8 or 9 Keyboard, mose Sbject to technical changes. Ordering information BIS is available in the following langages: DE = German EN = English ES = Spanish FR = French HU = Hngarian NL = Dtch PT = Portgese RU = Rssian ZH-TW = Traditional Chinese ZH-CN = Simplified Chinese A BIS basic package in one of these langages is always reqired when setting p a new system. A Re-fitting package is reqired, one per order, when extending an existing BIS. For re-fitting older versions of BIS (1.4.x to 2.x), or pgrading sch a version to the crrent one, please refer to the re-fitting packages for those versions. Ordering information BIS-Re-fitting featres V3.0 Order nmber BIS-GEN-REFV30 BIS 3.0 Basic Package DE Order nmber BIS-GEN-B30DE BIS 3.0 Basic Package EN Order nmber BIS-GEN-B30EN BIS 3.0 Basic Package NL Order nmber BIS-GEN-B30NL BIS 3.0 Basic Package FR Order nmber BIS-GEN-B30FR

6 6 BIS - Overview and basic package V3.0 BIS 3.0 Basic Package RU Order nmber BIS-GEN-B30RU BIS 3.0 Basic Package HU Order nmber BIS-GEN-B30HU BIS 3.0 Basic Package ES Order nmber BIS-GEN-B30ES BIS 3.0 Basic Package PT Order nmber BIS-GEN-B30PT BIS 3.0 Basic Package CN Order nmber BIS-GEN-B30CN BIS 3.0 Basic Package TW Order nmber BIS-GEN-B30TW BIS Upgrade to Version 3.0 DE Order nmber BIS-GEN-UP30DE BIS Upgrade to Version 3.0 EN Order nmber BIS-GEN-UP30EN BIS Upgrade to Version 3.0 NL Order nmber BIS-GEN-UP30NL Additional operator licence Licenses the addition of an operator to yor BIS installation. Order nmber BIS-GEN-CLIENT Additional OPC server licence Licenses the addition of an OPC server to yor BIS installation. Order nmber BIS-GEN-OPCLIC N x 100 Bosch detector points Licenses the addition of 100 Bosch detector points to yor BIS installation. Order nmber BIS-GEN-P100 N x 1,000 Bosch detector points Licenses the addition of 1000 Bosch detector points to yor BIS installation. Order nmber BIS-GEN-P1K N x 10,000 Bosch detector points Licenses the addition of Bosch detector points to yor BIS installation. Order nmber BIS-GEN-P10K BIS Upgrade to Version 3.0 FR Order nmber BIS-GEN-UP30FR BIS Upgrade to Version 3.0 RU Order nmber BIS-GEN-UP30RU BIS Upgrade to Version 3.0 HU Order nmber BIS-GEN-UP30HU BIS Upgrade to Version 3.0 ES Order nmber BIS-GEN-UP30ES BIS Upgrade to Version 3.0 PT Order nmber BIS-GEN-UP30PT BIS Upgrade to Version 3.0 CN Order nmber BIS-GEN-UP30CN BIS Upgrade to Version 3.0 TW Order nmber BIS-GEN-UP30TW Software Options Alarm docment package License bndle containing Display of action plans, Display of location maps, Graphical navigation, and Layer controlling. Order nmber BIS-GEN-ADPACK Alarm management package License bndle containing Message distribtion, Timer, Operator alarm, and Application lancher. Order nmber BIS-GEN-AMPACK Additional Division licence Licenses the addition of an atonomos, named party (aka Division) to yor BIS installation. Order nmber BIS-GEN-ONEDIV

7 7 BIS - Overview and basic package V3.0 Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 130 Perinton Parkway Fairport, New York, 14450, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems 11 Bishan Street 21 Singapore Phone: Fax: apr.secritysystems@bosch.com Bilding, No. 333 Fqan Road North IBP Changning District, Shanghai China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: al.secritysystems@bosch.com Bosch Secrity Systems 2012 Data sbject to change withot notice en, V6, 12. Dec 2012