ISC PPR1 WA16x Professional Series PIR Detectors with Anti mask

Transcription

1 Intrsion Alarm Systems ISC PPR WA6x Professional Series PIR Detectors with Anti mask ISC PPR WA6x Professional Series PIR Detectors with Anti mask 6 m x m (5 x 7) standard coverage; 8 m x (5 ft x ft) selectable short range coverage EN50-- Grade compliant Sensor data fsion technology Tri-focs optics technology MANTIS anti-mask The ISC-PPR-WA6x Professional Series PIR Detectors with Anti mask are exceptionally sited for commercial indoor applications. MANTIS anti-mask technology makes obscring the detector view nearly impossible for intrders. Sensor data fsion technology ensres that the detector sends alarm conditions based on precise information. Tri focs optics eliminate coverage gaps and respond efficiently to intrders. The powerfl combination of niqe featres in the Professional Series delivers sperior catch performance and virtally eliminates false alarms. The self-locking two-piece enclosre, bilt-in bbble level, flexible monting height, and three optional monting brackets simplify installation and redce service time. Fnctions Sensor Data Fsion Technology Sensor data fsion technology is a niqe featre that ses a sophisticated software algorithm to gather signals from mltiple sensors: two pyroelectric sensors, a microwave assist sensor, a room temperatre sensor, and a white light level sensor. The microcontroller analyzes and compares the sensor data to make the most intelligent alarm decisions in the secrity indstry. Microwave Assist Technology Microwave assist technology provides additional inpt into the sensor data fsion signal processing algorithm to improve alarm decisions when PIR signals are similar to false alarm sorces. Tri-focs Optics Technology Tri-focs optics technology ses optics with three specific focal lengths: long-range coverage, middlerange coverage, and short-range coverage. The detector applies the three focal lengths to 86 detection zones, which combine to make solid crtains of detection. Tri-focs optics technology also incldes two pyroelectric sensors, which deliver twice the standard optical gain. The sensors process mltiple signals to deliver precise performance virtally free of false alarms.

2 ISC PPR WA6x Professional Series PIR Detectors with Anti mask MANTIS Anti-mask Technology MANTIS (Mlti-point Anti-mask with Integrated Spray detection) ses patented prism lenses and active infrared detection to provide indstry-leading protection against all known forms of attack. MANTIS complies with the latest worldwide reglatory standards for detecting objects covering or placed in front of the detector. MANTIS is sensitive to materials regardless of textre or color, inclding fabric, paper, metal, plastic, tape, and spray. When MANTIS identifies a masking material, the detector sends a spervision anti-mask signal to the control panel. Active White Light Sppression An internal light sensor measres the level of light intensity directed at the face of the detector. Sensor data fsion technology ses this information to eliminate false alarms from bright light sorces. Available Coverage The standard coverage is 6 m x m (5 x 7). Installers can set a DIP switch at the detector to select short range coverage of 8 m x (5 ft x ft). Dynamic Temperatre Compensation The detector atomatically adjsts PIR sensitivity to identify hman intrders at critical temperatres. Dynamic temperatre compensation detects hman body heat accrately, avoids false alarms, and delivers consistent catch performance at all operating temperatres. Cover and Wall Tamper Switch When an intrder removes the cover or attempts to separate the detector from the wall, a normally-closed contact opens to alert the control panel. Self-adjsting LED The LED brightness adjsts atomatically to the srronding light level. A ble light-emitting diode (LED) indicates an alarm condition and activates dring a walk test. Remote Walk Test LED Users can enter a command throgh a keypad, a control center, or programming software to remotely enable or disable the walk test LED. Alarm Memory Alarm memory flashes the alarm LED to indicate stored alarms for se in mltiple nit applications. A switched voltage from the control panel controls the alarm memory. Solid State Relays Solid state relays send silent alarm otpt signals to provide a higher level of secrity and reliability. An external magnet does not activate the relay. The solid state relay ses less crrent than a mechanical relay, providing longer standby capacity dring a power loss. Draft, Insect, and Small Animal Immnity The sealed optic chamber provides immnity to drafts and insects, redcing false alarms. Small animal immnity redces false alarms cased by animals less than 4.5 kg (0 lb), sch as rodents. Remote Self Test A remote self test initiates when the walk test inpt switches to its tre state. The alarm relay and alarm LED activate for for seconds following a sccessfl test. The troble relay activates, and the alarm LED flashes following a failed test. Inpt Power Spervision When the power is lower than 8 V, a low inpt power troble condition activates the troble relay and cases the LED to flash. The troble condition clears atomatically when power reaches or exceeds 8 V. Troble Memory When the walk test inpt switches to its tre state for less than two seconds, the LED flashes to indicate the most recent troble condition. If there is no troble in memory, the LED does not flash. After twelve hors, or after the detector receives a second walk test plse for two seconds or less, the LED stops flashing and the troble memory clears. DIP Switch Programming The following fnctions are all programmed sing DIP switch settings: Local Walk Test LED Remote Walk Test Inpt Polarity Alarm Memory Polarity Long and Short Range Select MANTIS Anti-mask On and Off Certifications and approvals Erope WEEE Waste Electrical and Electronic Eqipment Directive The detectors are designed to also comply with the reqirements of: USA FCC Complies with Part 5 Region Certification Erope CE 004/08/EC EMC Directive (EMC), 006/95/EC Low-Voltage Directive (LVD), 995/5/EC Radio eqipment and Telecommnications Terminal Eqipment (R&TTE), 0/65/EU Restriction of the se of certain hazardos sbstances in electrical and electronic eqipment [-WA6G, -WA6H] EN50 EN50 Belgim INCERT B /d EN 50--:008, Grade [- WA6G] EN 50--:008, Grade [- WA6H] USA UL ANSR: Intrsion-detection Units (UL 69); ANSR7: Intrsion-detection Units Certified for Canada (ULC-S06)

3 ISC PPR WA6x Professional Series PIR Detectors with Anti mask Region Certification Italy IMQ CA.0084 [-WA6G] France AFNOR [-WA6H] AFNOR [-WA6G] Sweden INTYG -849 [-WA6G] Brazil ANATEL WA8G: ft 6 ft 6 m 4 m ft m m 87 the Netherlands NCP ITD0850-PI Klasse Installation/configration notes 4 m 6 m ft m 4 m 6 m 8 m ft 6 ft m 0m 8m 6m ft 6ft ft 9ft 46ft 5ft 9ft ft 6ft m m 4 m 6 m ft 6 ft 4m ft m 0m 87 m 4m ft 6m 8 m 6ft 0m ft m 0m m 4m 6m 9ft 8m 0m m 4m 6m ft 6ft ft 9ft 46ft 5ft m 0m 0m m 4m 6m 8m 0m m 4m 6m ft 6ft ft 9ft 46ft 5ft m 0m 0m m 4m 6m 8m 0m m 4m 6m Long-range Coverage 6 m x m (5 x 7) m m 4 m 6 m 8 m Selectable Short-range Coverage 8 m x (5 ft x ft) Monting Considerations The recommended monting height is m to m ( to ). Use an optional B8 Gimbal mont Bracket or B5 Low profile Swivel mont Bracket to srface mont the detector on a flat wall or in a corner. Use an optional B8 Universal Ceiling Bracket to mont the detector on the ceiling. Wiring Considerations Recommended wire size is 0. mm to mm (6 AWG to 6 AWG). Parts inclded Qantity Component Detector Flat-head screws Screw anchors Nylon cable tie Pattern Mask Installation Gide Technical specifications Electrical Power Reqirements Voltage (Operating): 9 VDC to 5 VDC

4 4 ISC PPR WA6x Professional Series PIR Detectors with Anti mask Crrent (Maximm): Crrent (Standby): Relay: Tamper: Troble: Mechanical Enclosre Design Color: Dimensions: Material: Indicators Alarm Indicator: Zones < 6 ma with alarm, troble, and LEDs active. 8 ma at VDC Solid state relay, normally-closed (NC) contacts, power spervised. W, 5 ma, 5 VDC, resistance < 0 Ω. Normally-closed (NC) contacts (with cover on) rated at 5 VDC, 5 ma maximm. Connect tamper circit to 4-hor protection circit. Solid state relay normally-closed (NC) contacts. White 7 mm x 69 mm x 58 mm (5 in. x.75 in. x.5 in.) High-impact ABS plastic Ble alarm LED Swiveling B5- low-profile mont Swiveling, low-profile, plastic mont for wall monting. The vertical swivel range is +0 to -0, while the horizontal swivel range is ±5. Available in triple packs. Order nmber B5- B8 Universal Ceiling mont Bracket Swiveling plastic mont for ceiling monting. The vertical swivel range is +7 to -6, while the horizontal swivel range is ±45. Order nmber B8 Zones: 86 Environmental Relative Hmidity: Temperatre (Operating and Storage): Environmental Rating (EN 500-5): Protection Rating (EN 6059, EN 500): 0 to 95%, non-condensing -0 C to +55 C (- F to +0 F) For AFNOR certificated installations, -0 C to +55 C (+4 F to +0 F) For UL Certificated installations, 0 C to +49 C (+ F to +0 F) Class II IP 4, IK04 Ordering information ISC PPR WA6G PIR Detector with Anti mask 0.55 GHz freqency. Order nmber ISC-PPR-WA6G ISC PPR WA6H PIR Detector with Anti mask GHz freqency sed in France and the United Kingdom. Order nmber ISC-PPR-WA6H Accessories B8 Gimbal mont Bracket Monts on a single-gang box and allows rotation of a detector. Wires are hidden inside. Order nmber B8

5 5 ISC PPR WA6x Professional Series PIR Detectors with Anti mask Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 0 Perinton Parkway Fairport, New York, 4450, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems Bishan Street Singapore 5794 Phone: Fax: apr.secritysystems@bosch.com 0 Bilding, No. Fqan Road North IBP Changning District, Shanghai 005 China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems 0 Data sbject to change withot notice en, V, 04. Nov 0