IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014
|
|
|
- Jayson Haynes
- 6 years ago
- Views:
Transcription
1 IAS Accreditation Number Company Name Address Contact Name TL-222 of South Florida, LLC 5371 Northwest 161st Street Miami, Florida John Lewczak Director of Quality Assurance Telephone (305) Effective Date of Scope April 20, 2017 Accreditation Standard ISO/IEC 17025:2005 Physical ANSI/ASTM D1621 ANSI/ASTM D1622 ANSI/ASTM D2126 ANSI A14.1 ANSI/UL1093 ASTM B117 ASTM C209 ASTM C303 ASTM C794 ASTM D412 ASTM D413 Standard test method for compressive properties of rigid cellular plastics Standard test method for apparent density of rigid cellular plastics Standard test method for response of rigid cellular plastics to thermal and humid aging American national standards for ladders - wood safety requirements Halogenated agent fire extinguishers Standard practice for operating salt spray (fog) apparatus Standard test methods for cellulosic fiber insulating board Standard test method for dimensions and density of preformed block and board type thermal insulation Standard test method for adhesion-in-peel of elastomeric joint sealants Test methods for vulcanized rubber and thermoplastic rubbers and thermoplastic elastomers tension Standard test methods for rubber property adhesion to flexible substrate International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 6
2 ASTM D471 ASTM D573 ASTM D897 ASTM D903 ASTM D1598 ASTM D1653 ASTM D1654 ASTM D2240 ASTM D2370 ASTM D2523 ASTM D3359 ASTM E96 ASTM E1512 ASTM F876 ASTM G29 ASTM G85 Standard test method for rubber property effect of liquids Standard test method for rubber deterioration in an air oven Standard test method for tensile properties of adhesive bonds Standard test method for peel or stripping strength of adhesive bonds Standard test method for time-to-failure of plastic pipe under constant internal pressure Standard test methods for water vapor transmission of organic coating films Standard test method for evaluation of painted or coated specimens subjected to corrosive environments Standard test method for rubber property durometer hardness Standard test method for tensile properties of organic coatings Standard practice for testing load-strain properties of roofing membranes Standard test methods for measuring adhesion by tape test Standard test methods for water vapor transmission of materials Standard test methods for testing bond performance of bonded anchors Standard specification for crosslinked polyethylene (PEX) tubing Standard practice for determining algal resistance of plastic films Standard practice for modified salt spray (fog) testing ANSI/ASTM D256 Standard test methods for determining the Izod pendulum impact resistance of plastics ANSI/ASTM D570 ANSI/ASTM D638 Standard test method for water absorption of plastics Standard test method for tensile properties of plastics TL-222 Page 2 of 6
3 ANSI/ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials Heating/Cooling CAN/CSA B72-M87 Fuels and appliances ANSI/AHRI Standard 210/240 Unitary air-conditioning and air-source heat pump ANSI/ASHRAE Standard 37 ANSI/UL 174 ANSI/UL 207 ANSI/UL 465 ANSI/UL 474 ANSI/UL 484 ANSI/UL 499 Methods of testing for rating electrically driven unitary air-conditioning and heat pump Standard for household electric storage tank water heaters Standard for refrigerant-containing components and accessories, nonelectrical Safety central cooling air conditioners Standard for dehumidifiers Standard for room air conditioners (excluding supplement SA - requirements for room air conditioners employing a flammable refrigerant in the refrigerating system) Standard for electric heating appliances ANSI/UL 834 Standard for heating, water supply, and power boilers - electric ANSI/UL 873 ANSI/UL 984 Standard for temperature-indicating and -regulating Hermetic refrigerant motor-compressors ANSI/UL 1995 Heating and cooling (excluding section 35 condensing and compressor units employing flammable refrigerants) ANSI/UL 1996 ANSI/UL 2021 Standard for electric duct heaters Standard for fixed and location-dedicated electric room heaters Mechanical ANSI/ASME A17.1 Safety code for elevators and escalators (section 8.33) TL-222 Page 3 of 6
4 ANSI/ASME A ANSI/UL 22 ANSI/UL 73 ANSI/UL 325 ANSI/UL710 ANSI/UL749 ANSI/UL756 UL 104 Manufactured safety vacuum release systems (SVRS) for residential and commercial swimming pool, spa, hot tub, and wading pool suction systems Standard for amusement and gaming machines Standard for motor-operated appliances Standard for door, drapery, gate, louver, and window operators and systems Standard for exhaust hoods for commercial cooking Household dishwashers Standard for coin and currency changers and actuators Standard for elevator door locking devices and contacts Electrical ANSI/ASME A17.5 ANSI/NFPA 79 ANSI/UL 50 Elevator and escalator electrical Electrical standard for industrial machinery Enclosures for electrical, non-environmental considerations ANSI/UL 50E Enclosures for electrical, environmental considerations (excluding 8.4, dust test, 8.5 external icing test, 8.7 indoor corrosion protection, 8.8 outdoor corrosion protection, 8.9 additional corrosion protection for type 3x, 3rx, 3sx, 4x and 6p, 8.10 submersion test, 8.12 oil exclusion test) ANSI/UL 65 ANSI/UL 96 ANSI/UL 197 ANSI/UL 231 ANSI/UL506 ANSI/UL507 ANSI/UL508 ANSI/UL676 ANSI/UL813 Standard for wired cabinets Standard for lightning protection components Standard for commercial electric cooking appliances Standard for power outlets Standard for specialty transformers Standard for electric fans Industrial control Standard for underwater luminaires and submersible junction boxes Standard for commercial audio TL-222 Page 4 of 6
5 ANSI/UL1008 ANSI/UL1029 Transfer switch Standard for high-intensity-discharge lamp ballasts ANSI/UL1081 Standard for swimming pool pumps, filters, and chlorinators ANSI/UL1238 ANSI/UL1310 ANSI/UL1598 ANSI/UL1838 ANSI/UL2108 ANSI/UL Standard for control for use with flammable liquid dispensing devices Standard for class 2 power units Luminaires Standard for low voltage landscape lighting systems Standard for low voltage lighting systems Low voltage transformers - part 1: general requirements ANSI/UL Low voltage transformers - part 3: class 2 and class 3 transformers UL 775 Standard for graphic arts IEC/EN/CSA/UL/ANSI/AAMI ES Medical electrical, part 1: general requirements for safety (excluding sections 5, 6 and 7 and sub clauses 43.2 and 48) IEC/EN/CSA/UL Information Technology Equipment Safety Part 1 NEMA 250 Enclosures for Electrical Equipment (1000 Volts Maximum) Energy Star Program Requirements Light commercial HVAC, (light commercial HVAC, (1- and 3- phase packaged and split systems <65,000 BTU/h) and ANSI/AHRI standard 210/240 performance rating of unitary air-conditioning and air source heat pump Air source heat pump and central air conditioner and ANSI/AHRI standard 210/240 performance rating of unitary air- conditioning and air source heat pump Room air conditioners and DOE test method 10 CFR 430, subpart B, appendix F Geothermal heat pumps and ANSI/AHRI standard 870 (DGX Systems) and ISO (water-to-air models) and ISO (water-to-water models) TL-222 Page 5 of 6
6 Residential water heaters and DOE test method 10 CFR 430, subpart B, appendix E (electric units only) Water coolers TL-222 Page 6 of 6
Standard for tests for flammability of plastic materials for parts in devices and appliances
IAS Accreditation Number TL-212 Company Name Address 3933 U.S. Route 11 Cortland, NY 13045 Contact Name Terence J. O'Beirne, Quality Manager Telephone (607)758-6316 Effective Date of Scope September 25,
10606 Bloomfield Ave Santa Fe Springs, CA USA
IAS Accreditation Number FEB-103 Company Name eti Conformity Services Address 10606 Bloomfield Ave Santa Fe Springs, CA 90670 USA Contact Name Sam Daye Telephone (562) 236-9555 Effective Date of Scope
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 1809 10 th Street, Suite 400 Plano, TX 75074 Authorized Representative: Charles Parker Phone: 972-202-8800 MECHANICAL Valid
13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations
IAS Accreditation Number Company Name Address Contact Name Telephone (604) 273-4581 Effective Date of Scope February 9, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-270 - Vancouver 13799 Commerce
Address 3255 Pepper Ln., Suite 112 Las Vegas, NV 89120, USA
IAS Accreditation Number TL-500 Company Name Address 3255 Pepper Ln., Suite 112 Las Vegas, NV 89120, USA Contact Name Ruben Ugarte Telephone +1 (604) 247-0444 Effective Date of Scope August 16, 2018 Accreditation
13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Manager Accreditations
IAS Accreditation Number Company Name Address Contact Name Telephone (416) 747-4013 Effective Date of Scope May 22, 2017 Accreditation Standard ISO/IEC 17025:2005 TL-270 13799 Commerce Parkway Richmond,
Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
IAS Accreditation Number Company Name Address TL-657 Room 209, No. 46, Nanxiang 3 rd Road Science City Development Zone Guangzhou 510663 People s Republic of China Javen Xuan, Quality Manager Contact Name
Fluorescent Lamps - Guide for Electrical Measurements
IAS Accreditation Number TL-471 Company Name UL-CCIC Company Limited Address No. 2, Chengwan Road Suzhou Industrial Park Suzhou 215122 People s Republic of China Contact Name Antonio Zhang, Laboratory
Performance of household electrical appliances-refrigerating. EN Domestic cooking appliances burning gas - Part 1-1: Safety - General
IAS Accreditation Number Company Name Address Contact Name TL-601 Baglar Mah. Osmanpasa Cad. No: 95 Is Istanbul Plaza E Girişi 34209 Gunesli Istanbul Turkey Ms. Muge Okumus E&E Section Manager Telephone
Evaluation of properties of polymeric materials. Enclosed and dead-front switches (tri-national standard with NMX-J-162-ANCE-2016 and UL 98)
IAS Accreditation Number Company Name Address TL-269 865 Ellingham Avenue Pointe-Claire, Quebec H9R 5E8 Canada Benjamin Barker, Manager, Accreditations Contact Name Telephone (416) 747-4013 Effective Date
10 CFR 430 Uniform test method for measuring the energy consumption of freezers (appendix B to Subpart B)
IAS Accreditation Number TL-395 Company Name LTD., Guangzhou Branch Address Block E, No.7-2 Guang Dong Software Science Park Caipin Road, Guangzhou Science City Getdd, Guangzhou People s Republic of China
8501 E. Pleasant Valley Rd. Cleveland, OH 44131
IAS Accreditation Number Company Name Address Contact Name TL-266 8501 E. Pleasant Valley Rd. Cleveland, OH 44131 Benjamin Barker Manager, Accreditations Telephone (416)747-4013 Effective Date of Scope
CERTIFICATION BODY ACCREDITATION PROGRAM QUALITY AUDITING INSTITUTE
CERTIFICATION BODY ACCREDITATION PROGRAM Accredited Legal Entity: QUALITY AUDITING INSTITUTE #16-211 Schoolhouse Street, Coquitlam, BC V3K 4X9 Canada Telephone: (604) 461-8378 Fax: (604) 461-8377 Email:
Laboratory Authorization Certificate
Laboratory: Scope of Authorization: NEMKO S.p.A. a Socio Unico Via del Carroccio, 4-20853 Biassono (MB) ITALY UL60950-1 Information Technology Equipment Safety Part 1 General Requirements (Including AM
Certification Programs, Standards,
Certification Programs, Standards, and Guidelines Visit the AHRI Directory www.ahridirectory.org View and download AHRI Standards and Guidelines www.ahrinet.org Certification Programs, Standards, and
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COSMOS CORPORATION 1 718-1, Katsurase-Cho Matsusaka-shi, Mie 515-1104 JAPAN Akira Sakai (Authorized Representative) +81 598-30-6211 sakai-akira@cosmos-corp.com
EN Light And Lighting - Measurement And Presentation Of Photometric Data Of Lamps And Luminaires - Part 1: Measurement And File Format
IAS Accreditation Number TL-553 Company Name Address Via delle Industrie 5 & 6, 20061 Carugate (MI), Italy Contact Name Dario Rivoltella, Laboratory Manager Telephone +39 02 92526427 Effective Date of
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bucknalls Lane Garston Watford Hertfordshire WD25 9BA Contact: Alvaro Enquita-Gonzalez Tel: +44 (0)1923-665350 Fax: +44 (0)1923-665452 E-Mail:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUSTRALIAN NATIONAL TESTING LABORATORIES PTY. LTD. Unit 17, 15 Suscatand Street Rocklea 4106, Queensland, Australia Jeff Profke Phone: 61 7 32740737 THERMAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. 1 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 Thailand Mr. Dirk Fleischer (Quality
SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL Verification Services Inc. 1559 King Street Enfield, CT 06082 www.ul.com/consumer-products Point of Contact:
Exhibit A. Mechnical, Plumbing, and Electrical Plan Check and Inspection Fees. Total Cost Per Unit FEE TYPES MECHANICAL PERMIT FEES
Mechnical, Plumbing, and Electrical Plan Check and Inspection Fees MECHANICAL PERMIT FEES FEE TYPES Total Cost Per Unit $ 180.36 Stand Alone Mechanical Plan Check (hourly rate) $ 180 UNIT FEES: Install/Relocate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager
AHRI Certification Program Scopes - COOLING
Air-to-Air Energy Recovery Ventilators (AHRI Std. 1060) Automatic Commercial Ice-Cube Machines and Ice Storage Bins (AHRI Stds. 810 & 820) Central Station Air-Handling Units (AHRI Std. 430) Commercial
IAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany
IAS Accreditation Number TL-437 Company Name Address Admiral Rosendahl Strasse 23 Neu Isenburg 63263 Germany Contact Name Ingmar Essert Telephone +4969489810234 Effective Date of Scope March 9, 2018 Accreditation
SECTION PACKAGE AIR COOLED WATER CHILLER PART 1 GENERAL 1.01 SECTION INCLUDES. A. Chiller package. B. Charge of refrigerant and oil.
1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 PACKAGE AIR COOLED WATER CHILLER PART 1 GENERAL 1.01 SECTION INCLUDES A. Chiller package. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled
2013 ASHRAE. Standards & Guidelines CD. Contents
2013 ASHRAE Standards & Guidelines CD Contents ANSI/ARI/ASHRAE ISO Standard 13256-1:1998 (RA 2012) Water-source heat pumps testing and rating for performance Part 1: Water-to-air and brine-to-air heat
(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.
First Revision No. 1-NFPA 501-2015 [ Section No. 5.3.1.3 ] 5.3.1.3 The following conditions shall be met when an interior finish material is tested using the test protocol of NFPA 286, Standard Methods
De accreditatie werd uitgereikt aan/ L'accréditation est délivrée à/ The accreditation is granted to/ Die akkreditierung wurde erteilt für:
Bijlage bij accreditatie-certificaat Annexe au certificat d'accréditation Annex to the accreditation certificate Beilage zur Akkreditatierungszertifikat 472-TEST NBN EN ISO/IEC 17025:2005 Versie/Version/Fassung
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
STS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
Energy Efficiency Labelling
THE KINGDOM OF SAUDI ARABIA IMPORT GUIDE No 02 Energy Efficiency Labelling Important Note : this Import Guide is intended to give Bureau Veritas Customers essential information as reference related to
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-09-19 to 2019-09-03 Date of issue: 2018-09-19
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV RHEINLAND OF NORTH AMERICA, INC. 12 Commerce Road Newtown, CT 06470 Mr. Bruce Fagley: 203 426 0888 x119 Email: bfagley@us.tuv.com www.tuv.com ELECTRICAL
Chapter 1 General...9 Article 100 Definitions...11 Article 100 Questions Article 110 Requirements for Electrical Installations...
Article 90 Introduction...1 90.1 Purpose of the NEC...1 90.2 Scope of the NEC...2 90.3 Code Arrangement...4 90.4 Enforcement...5 90.5 Mandatory Requirements and Explanatory Material...6 90.6 Formal Interpretations...6
Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]
![Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]](/thumbs/74/71051808.jpg "Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]")
Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ] Chapter 2 Referenced Publications 2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered
CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018,
STANDARDS Chapter 17, Part II CHAPTER 17 STANDARDS 1701.0 Scope Part I of this chapter covers standards that are hereby declared to be part of this code. Part II of this chapter lists standards which relate
Chapter 1 General... 5
About This Textbook...xi About the National Electrical Code...xv About the Authors and Illustrator...xix About the Team...xxi Article 90 Introduction to the National Electrical Code... 1 90.1 Purpose of
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames.
2 Pine Trees, Chertsey Lane, Staines-upon-Thames. TW18 3HR Unit 8B, B W Estates Oldmixon Crescent Weston-super-Mare North Somerset BS24 9BA Contact: Mr K D James Tel: +44 (0)1934-644866 Fax: +44 (0)1934-413909
Energy Efficiency Labelling
THE KINGDOM OF SAUDI ARABIA IMPORT GUIDE No 02 Energy Efficiency Labelling Important Note : this Import Guide is intended to give Bureau Veritas Customers essential information as reference related to
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 4ward Ltd 5 Hampers Common Industrial Estate Petworth West Sussex GU28 9NR Contact: Ms Lesley Komatsu Tel: +44 (0)1798-342240 Fax: +44 (0)1798-344482
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Washington Laboratories, Ltd. 7560 Lindbergh
CHAPTER 6 [CE] REFERENCED STANDARDS
![CHAPTER 6 [CE] REFERENCED STANDARDS](/thumbs/76/74450928.jpg "CHAPTER 6 [CE] REFERENCED STANDARDS")
CHAPTER 6 [CE] REFERENCED STANDARDS User note: About this chapter: Chapter 6 lists the full title, edition year and address of the promulgator for all standards that are referenced in the code. The section
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Jay Kogoma or Michelle Loeffler Phone 651 730 1188 ELECTRICAL Valid to: February
TABLE OF CONTENTS. Part I Administrative... 1
Part I Administrative............................ 1 CHAPTER 1 Deleted Part II Definitions.............................. 3 CHAPTER 2 DEFINITIONS.................... 3 R201 General..................................
SECTION AIR-SOURCE UNITARY HEAT PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 81 43 AIR-SOURCE UNITARY HEAT PUMPS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
CHAPTER 6 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL
CHAPTER 6 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
High Performance Building Guide 1
Description This Guide is intended to be used for projects with a Vermont Certified: High Performance energy efficiency goal. This High Performance goal is a whole-building efficiency approach rather than
A DIVISION OF HOSE & TUBING CATALOG 2017
A DIVISION OF HOSE & TUBING CATALOG 2017 Hose assemblies fabricated to customer requirements - our specialty. Let us know what your requirements are. Hose branding - just one of the value added services
Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement
![Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement](/thumbs/89/99621071.jpg "Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement")
Second Revision No. 1-NFPA 90A-2016 [ Section No. 2.3.2 ] 2.3.2 ASTM International Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM C411, Standard
Design and Construction Standards SECTION PLUMBING EQUIPMENT
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES
Notice That Particular Low Voltage or Extra-low Voltage Fittings or Appliances are Declared Medium Risk Articles
Notice That Particular Low Voltage or Extra-low Voltage Fittings or Appliances are Declared Medium Risk Articles Pursuant to Regulation 83 of the Electricity (Safety) Regulations 2010, I, Mark Stephen
SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM
SECTION 23 81 06 - PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. This Section includes equipment types that contain all the components of the refrigeration process within
Accreditation Manager. Copper and copper alloy waste fittings
IAS Accreditation Number Company Name Address Contact Name Telephone +86 20-8732-0648 Effective Date of Scope April 3, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-464 CCIC-CSA International Certification
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF UBBER MPANY, INC. RUBBER COMPANY, INC RUBBER COMPANY, INC.
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF RUBBER COMPANY, INC. UBBER MPANY, INC. RUBBER COMPANY, INC Hose assemblies fabricated to customer requirements - our specialty. Let
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
Deemed to Comply Standards
1 of 5 28/10/2009 1:31 p.m. Deemed to Comply Standards Type of Product Standards Compliance with the appropriate product safety standards listed below, will satisfy the requirements of AS/NZS 3820 "Essential
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK SA Group Testing UK Ltd ISO/IE 17025:2005 Unit 6 Hawarden Industrial Park Hawarden Deeside H5 3US ontact: Mr S P ork Tel: +44 (0)1244 670900
CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation
CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation Accredited Legal Entity: LABTEST CERTIFICATION INC. Contact Name: Address: Kavinder Dhillon 3133-20800 Westminster Highway Richmond,
Hazardgard. Product Profile. Engineered to perform in the harshest environments. Hazardous Location Room Air Conditioners
Product Profile Hazardgard Engineered to perform in the harshest environments Features Hazardous Location Room Air Conditioners Permanent split capacitor motor Hermetically sealed refrigeration system
TABLE OF CONTENTS CHAPTER 1 GENERAL RULES CHAPTER 2 WIRING AND PROTECTION... 51
TABLE OF CONTENTS About This Textbook...xi How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 5 25800 Commercentre Dr. Lake Forest, CA 92630 Mr. Jay Kogoma Phone: 949-448-4100 ELECTRICAL Valid to: December 31, 2017
Schedule of Approved Fees
Schedule of BUILDINGMISCELLANEOUS Inspection not otherwise covered by a fee and is regulated by LA County Oridnance OCCUPANCY INSPECTIONS Group R or Group M Other Groups other than R or M (Floor Area)
SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA
Page 236423-1 Copyright 2009 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
SECTION PACKAGED, OUTDOOR, CENTRAL-STATION AIR-HANDLING UNITS
SECTION 237413 - PACKAGED, OUTDOOR, CENTRAL-STATION AIR-HANDLING UNITS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes packaged, outdoor, central-station air-handling units (rooftop units) with the
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
Annex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012
SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012 TEi-LISTING SERVICES 3455 S. 500 W. Salt Lake City, UT 84115 Mrs. Alona MacGregor (Authorized Representative) Phone: 801 262 1868 Email: alona@tei-test.com
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Washington Laboratories, Ltd. 1, 2 7560 Lindbergh Drive, Gaithersburg, Maryland 20879 John Repella Phone: 301-216-1500
C. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1.
SECTION 236426 - ROTARY-SCREW WATER CHILLERS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes packaged, water cooled or air cooled as scheduled, electric-motor-driven, rotary-screw water chillers
Scope of accreditation
WINS001 Plastics : fittings valves Dimensions : Wall thickness, diameter, angle, length EN ISO 3126 NBN T42-402 (1978) WINS002 Plastics Longitudinal reversion NBN EN ISO 2505 NBN EN 743 (1994) NBN T42-603
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUSTEST LABORATORIES MELBOURNE 53 Latitude Blvd. Thomastown, Victoria, 3074, Australia Martin Garwood Phone: +61 (0)3 9464 4016 Fax: +61 (0)3 9464 0687 ELECTRICAL
TABLE OF CONTENTS CHAPTER 5 SPECIAL OCCUPANCIES CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook...xiii How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
TABLE OF CONTENTS CHAPTER 2 WIRING AND PROTECTION CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook...xi How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
This fee schedule is for Building Inspection Fees only.
Building Permit Fees: Minimum Fee, all permits Residential, one- and two-family including additions and.35/total sq. ft. attached garages Residences, Apartments, Three Family and Over, Row.35/total sq.
AHRI Product Section and Subsection Scopes
Air Control and Distribution Devices Product Section Air-Cooled and Evaporative Condensers Subsection Air-Cooling and Air Heating Coils Subsection Air-to-Air Energy Recovery Ventilation Product Section
City of Los Angeles RECOGNIZED ELECTRICAL FIELD TESTING AGENCIES
categories of unapproved electrical equipment installed in the, with review and approval of the tests 1. Department of Building & Safety Electrical Testing Laboratory Recognized for: - Approval of all
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60455-2 Edition 3.0 2015-06 Resin based reactive compounds used for electrical insulation Part 2: Methods of test INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220.99; 29.035.01
SECTION ELECTRICAL GENERAL PROVISIONS
PART 1 GENERAL 1.01 SECTION INCLUDES A. General provisions for Electrical Systems B. Wire and cable for 600 volts and less. C. Wiring connectors. D. Electrical tape. E. Heat shrink tubing. F. Wire pulling
Performance Rating of Heat Pump Pool Heaters
ANSI/AHRI Standard 1160 (formerly ARI Standard 1160) 2008 Standard for Performance Rating of Heat Pump Pool Heaters IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 10 Technology Drive (Test Laboratory) Peabody, MA 01960 Mr. William Stinson Phone 1 978 573 2517 ELECTRICAL Valid To: December 31, 2019
Design Standards Manual
Design Standards Manual Table of Contents: Part III (Divisions 1-32) Section No. Title Revision DIVISION 1: GENERAL REQUIREMENTS 01524 Construction Waste Management 05/07 01815 HVAC Commissioning Requirements
AHRI Standard 870 (I-P) Standard for Performance Rating of Direct Geoexchange Heat Pumps
AHRI Standard 870 (I-P) - 2016 2016 Standard for Performance Rating of Direct Geoexchange Heat Pumps IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the
THERMOPLASTIC - NYLON FLAT WASHERS AND SPACERS
The main advantages of NYLON as a washer material are its resistance to abrasion, repeated impacts, organic solvents, oils, gasoline and temperature extremes. It has good creep resistance (yielding to
SECTION COMMERCIAL-KITCHEN HOODS
SECTION 23 38 13 COMMERCIAL-KITCHEN HOODS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in the section that are not applicable and renumber
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60454-2 Third edition 2007-06 Pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test Commission Electrotechnique Internationale International Electrotechnical
SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
FLAMMABLE REFRIGERANTS UPDATE FOR HVAC&R EQUIPMENT IN NORTH AMERICA
FLAMMABLE REFRIGERANTS UPDATE FOR HVAC&R EQUIPMENT IN NORTH AMERICA April 2015 Barry Karnes, Principal Engineer UL LLC UL and the UL logo are trademarks of UL LLC 2015 1 Some History Pre 1990, most refrigerants
MACH N-407 Heat Pump Air-Cooled Chiller
MACH060-01-N-407 Heat Pump Air-Cooled Chiller Heat Pump Air-Cooled Chillers for Global Residential and Light Commercial Microclimates MACH NOMENCLATURE BREAKDOWN MACH-060-01 - N - 407 Refrigerant Type
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE ENGINEERING PTY LTD 90 Indian Drive Keysborough, Victoria 3173, AUSTRALIA Mr. Simon Grilj Phone: 61 3 9763 3079 Email: simon@compeng.com.au ELECTRICAL
SECTION PLUMBING EQUIPMENT
PART 1 GENERAL 1.1 SECTION INCLUDES A. Water heaters B. Packaged water heating systems C. Water storage tanks D. Water softeners E. Pumps F. Circulators 1.2 REFERENCES SECTION 22 30 00 PLUMBING EQUIPMENT
MAC-120HE-03 Air-Cooled Chiller
MAC-120HE-03 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 380/415/460-3-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-03
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD CANADA 1 11 Gordon Collins Dr. Gormley, Ontario, L0H 1G0, CANADA William (Mac) Elliott Phone: 813 284 2736 ELECTRICAL Valid To: June 30, 2019 Certificate
This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
RetroAire Model Number: 9,000 to 36,000 Btuh (2.6 to 10.5 kw)
Indoor Single Package Vertical, Air-Cooled Heat Pump Unit RetroAire Model Number: Capacity Range: VPRH 9,000 to 36,000 Btuh (2.6 to 10.5 kw) Part 1 General 1.01 UNIT DESCRIPTION A. Indoor, single package
Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 1950 Evergreen Blvd., Suite 100 Duluth, GA 30096 Gary Flom Phone 678 775 2334 ELECTRICAL Valid To: March 31, 2020 Certificate
APPENDIX - L INTERNATIONAL RESIDENTIAL CODE ELECTRICAL
This Appendix (2000 IRC Appendix-L) is produced, copyrighted, and maintained by the National Fire Protection Association Association, all rights reserved. Use of this Appendix is pursuant to license with