Effective Date: June 2017 Void After: June Product: Plumbing Fixture Fittings File No. 4995
|
|
- Abner Reeves
- 6 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: June 2017 Void After: June Valley Avenue Winchester, VA Identification: Plumbing supply fitting shall be marked with the manufacturers recognized name, trademark, or other mark or, in the case of private labeling, the name, trademark, or other mark of the customer for whom the fitting was manufactured. The marking shall be accomplished by use of a permanent mark or by placing a permanent label on the product. Markings on supply fitting shall be visible after installation. Single handle, single control, and automatic compensating mixing bath and shower valves shall have identifiable temperature control settings in which the settings are indicated by words cold, warm, hot, by numbers, or graphically. Packaging shall be marked with the manufacturers recognized name, trademark, or mark of the consumer for whom the fitting was manufactured as well as the model number. The product shall also bear the cupc certification mark. Characteristics: Plumbing fittings are to be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada International Plumbing Code (IPC ) Products are in compliance with the following standard(s): ASME A /CSA B
3 MODELS: TECHNICAL CONCEPTS Commercial Lavatory Set: Description Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) Shank and Spout UPC TC SST AutoFaucet Milano Basic Model (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, No Cover Plate, No Mixing Valve, No Supply Hoses) UPC TC SST AutoFaucet Milano Single Hole (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, No Cover Plate, Std Mixing Valve, Supply Hoses) UPC TC SST AutoFaucet Milano w/ 4 Cover Plate & Mixing Valve (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, Cover Plate, Std. Mixing Valve, Supply Hoses) UPC TC SST AutoFaucet Milano w/ 8 Cover Plate & Mixing Valve (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, Cover Plate Std. Mixing Valve, Supply Hoses) Retrofit or OEM Components: Description SST Single Valve Box Commercial SST Single Valve Box Commercial (Ground Wire Kit and Battery Box) NSF SST Single Valve Box Commercial (Ground Wire Kit and Battery Box) SST Single Valve Box Commercial Spare Part/Replacement (w/o Battery Box) SST Milano PC Spout Assy 0.5 GPM Laminar Commercial SST Capri PC Spout Assy 0.5 GPM Laminar Commercial SST Sienna PC Spout Assy 0.5 GPM Laminar Commercial SST Verona PC Spout Assy 0.5 GPM Laminar Commercial SST Mixing Valve (Flow Control) SST Thermostatic Mixing Valve (TC Thermostatic) NSF SST Thermostatic Mixing Valve (TC Thermostatic) SST Dual Valve Box Residential Retrofit (is sold to OEMs for their kits) NSF SST Dual Valve Box Residential Retrofit (is sold to OEMs for their kits) SST Single Valve Box Residential Retrofit (is sold to OEMs for their kits) NSF SST Single Valve Box Residential Retrofit (is sold to OEMs for their kits) FG FG FG FG Page 3 of 5
4 FG FG FG FG FG FG FG FG FG FG FG Description AFCT MILANO CP LOW LEAD RCP AFCT MILANO MN HOSE CP LOW LEAD RCP AFCT MILANO SST 4CP CP LOW LEAD RCP AFCT MILANO 4-MN HOSE CP LOW LEAD RCP AFCT MILANO 8-MN HOSE CP LOW LEAD RCP AFCT MILANO SST 8CP CHM LOW LEAD RCP AFCT MILANO DM 4 MV HC CP LOW LEAD RCP AFCT MILANO SST 4CP MV HC LOW LEAD RCP AFCT MILANO MV-HC SAT LOW LEAD RCP AFCT MILANO 4-MV-HS SAT LOW LEAD RCP AFCT MILANO 8-MV-HS SAT LOW LEAD RCP AFCT MILANO TMV-HC CP LOW LEAD RCP AFCT MILANO 4-TMV-HC CP LOW LEAD RCP AFCT MILANO 8-TMV-HC CP LOW LEAD TC FG AFCT VEN 3.5 WM 4-TMV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM TMV-HC CP LOW LEAD RCP FG AFCT VEN DM MV-HC CP LOW LEAD RCP FG AFCT VEN DM 8-MV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM 8-MV-HC CP LOW LEAD RCP FG AFCT VEN 3.5 DM 4-MV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM MV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM 8-TMV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM 4-TMV-HC CP LOW LEAD RCP FG AFCT VEN 5.5 DM 4-MV-HC CP LOW LEAD RCP AFCT VERONA MV-HC CP LOW LEAD RCP AFCT VERONA TMV-HC CP LOW LEAD RCP AFCT VERONA 4-MV-HC CP LOW LEAD RCP AFCT VERONA 4-TMV-HC CP LOW LEAD RCP AFCT VERONA 8-MV-HC CP LOW LEAD RCP AFCT VERONA 8-TMV-HC CP LOW LEAD RCP Page 4 of 5
5 ADDITIONAL COMPANY INFO: Bradley Fixtures Corporation Description Shank and spout S Auto Faucet w/surround Sensor Centershank S Automatic Faucet with Surround Sensor Technology Page 5 of 5
Effective Date: May Rev. 1/31/2018- Void After: May Product: Plumbing Fixtures (Stainless Steel) File No. 6088
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: January 2018 Void After: January Product: Plumbing Fixture Fittings File No. 6354
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July 2017 Void After: July Product: Plumbing Fixture Fittings File No. 4472
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: not available Void After: Product: Plumbing Fixture Fittings File No. 4079
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December 2017 Void After: December Product: Outlet Boxes (Washing Machine) File No. 2150
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December Rev. 3/12/2018- Void After: December Product: Lead Free Plumbing Products File No. 6661
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July Rev. 1/26/2018- Void After: July Product: Plumbing Fixture Fittings File No. 3474
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2018 Void After: October 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: September 2017 Void After: September 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October Rev. 12/15/2017- Void After: October Product: Lead Free Plumbing Products File No. 6441
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: August Rev. 12/22/2017- Void After: August Product: Plumbing Fixture Fittings File No. 4318
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING.
ICC-ES Report PMG-1367 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION AND CONTROL
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTING
ICC-ES Report PMG-1130 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION
More informationCertificate of Compliance
Certificate of Compliance Certificate: 1852750 Master Contract: 214418 Project: 2501914 Date Issued: February 27, 2012 Issued to: 11160 Grace Ave Fountain Valley, CA 92708 USA Attention: Hiroshi Ichikawa
More informationEffective Date: March Rev. 6/1/2018- Void After: March Product: Plumbing Fixture Fittings File No. 3109
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationS-8720-CA-E S-8721-CA-E S-8710-CA-E S-8711-CA-E S-8700-CA-E S-8701-CA-E. Sensorflo Battery Powered Lavatory Faucet MODELS: FEATURES: COMPLIANCE:
S-8700-CA-E S-8701-CA-E S-8710-CA-E S-8711-CA-E S-8720-CA-E S-8721-CA-E Sensorflo Battery Powered Lavatory Faucet MODELS: S-8700-CA-E: Single basin low profile faucet. S-8701-CA-E: Single basin low profile
More informationCommercial Brass AquaSense E-Z Sensor Faucets
Commercial Brass AquaSense E-Z Sensor Faucets AquaSense E-Z Sensor Faucets Durable Sanitary Architectural ADA Compliant Sustainable Innovative Customizable Reliable Z6915-XL Z6913-XL Z6930-XL-GEN Enhanced
More informationSummary of Substantive Changes between the 2012 and 2018 editions of ASME A /CSA B125.1 Plumbing Supply Fittings
Summary of Substantive Changes between the 2012 and 2018 editions of ASME A112.18.1/CSA B125.1 Plumbing Supply Fittings Presented to the IAPMO Standards Review Committee on May 6, 2013 General: The changes
More informationEVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS
ICC-ES Report PMG-1280 Reissued 10/2016 This report is subject to renewal 10/2017 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES SECTION: 22
More informationSPEAKMAN SAFETY PRODUCTS Installation, Maintenance & Operation Instructions SEF-18XY, EYESAVER FAUCET with SENSORFLOW, Battery or AC POWER
SPEAKMAN SAFETY PRODUCTS Installation, Maintenance & Operation Instructions SEF-18XY, EYESAVER FAUCET with SENSORFLOW, Battery or AC POWER DESCRIPTION The SEF-18XY, Eyesaver faucet series combines a Gooseneck
More informationAll sinks and lavatories shall be permanently marked to identify the
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEVALUATION SUBJECT: DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES.
ICC-ES Report PMG-1095 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: WATER CLOSET,VITREOUS CHINA WATER CLOSET WITH DUAL FLUSH DEVICE, VITREOUS CHINA LAVATORIES, VITREOUS
More informationTrap Seal Primers and Water Hammer Arrestors TSP-2015 Go to for the most current product specification sheets.
www.mifab.com TSP-2015 Go to www.mifab.com for the most current product specification sheets. Trap Seal Primers and Water Hammer Arrestors LIT-062, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109,
More informationBRADLEY CORPORATION DOMESTIC WATER PIPING SPECIALTIES Page 1 of 9
BRADLEY THERMOSTATIC MIXING VALVES Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, produces four lines of thermostatic mixing valves (TMVs). Bradley Navigator High-Low
More informationFL-2H, FL-2L Frequency Lavatory System FL-Series
& TAS Compliant (lower or "concave" stations only) Patented Molded One-Piece Design with Integral Bowls Constructed of Terreon or Terreon RE Solid Surface Material Access Panel and Transition Cover Enclosure
More informationCOMMERCIAL VOLUME PLUMBING
COMMERCIAL VOLUME 03 PLUMBING 2 SPEAKMAN.COM FIXTURES DESIGNED WITH QUALITY IN MIND A book of superior quality, thoughtful innovation, and unrivaled performance. These fixtures exist to endure the demands
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17065:2012
SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012 TEi-LISTING SERVICES 3455 S. 500 W. Salt Lake City, UT 84115 Mrs. Alona MacGregor (Authorized Representative) Phone: 801 262 1868 Email: alona@tei-test.com
More informationMoen Commercial Products Eco-Performance Product Guide
Moen Commercial Products Eco-Performance Product Guide Learn how the use of MOEN Commercial Products What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System
More informationEVALUATION SUBJECT: EPA WATERSENSE PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-E Report PMG-1410 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION UBJECT: EPA WATERENE PLUMBING UPPLY FITTING DIVIION: 22 00 00 PLUMBING ECTION: 22 09 00 INTRUMENTATION AND CONTROL
More informationLigature Resistant Sensor Faucet Patent # US D635,386 #SAL-5011/SF370
Ligature Resistant Sensor Faucet Patent # US D635,386 #SAL-5011/SF370 Installation, Maintenance & Operation Instructions SENSORFLO Battery or AC Powered This Ligature Resistant Sensor Faucet is designed
More informationWF2613 Classic Corner Washfountain with 9" Deep Bowl
cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Reliable Foot, Air, TouchTime or Infrared Activations Specifications Size and Capacity Accommodates three
More informationSN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Available with Infrared, Air or TouchTime Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height Models and Juvenile Height 54"
More information360 Series Waste & Overflow System. Installation Manual and User Guide
1 360 Series Waste & Overflow System Installation Manual and User Guide Table of Contents 2 Overview of Fill&Drain...p. 3 Specification Sheet....p. 4 Installation Diagrams: Tub & Shower with Pressure Balance
More informationViessmann B1HA Boiler Series
User Guide Version 1.0 Installation and Commissioning Guide www.tamashydronic.com Table of Contents Introduction... 3 Components... 4 Operation... 5 Technical Data... 6-7 Wiring... 8-9 Commissioning...
More informationCentral Brass C O M P A N Y. A Division of Pioneer Industries, Inc. Installation Guide
Central Brass C O M P A N Y A Division of Pioneer Industries, Inc. Installation Guide Slow-Close Two Handle Widespread Lavatory Faucet: 3127-AN1 3127-AVN1 3127-DAN1 3127-DAVN1 This product meets the following
More informationNavigating The Product Certification Maze: Building Codes and Product Standards. AGENDA be Covered
AGENDA be Covered Navigating The Product Certification Maze: Understanding the Product Testing & Certification Process and Certification Marks BSC Course No. 49-6664 Presenter: Lisa Reiheld, CSA Group
More informationRECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM
RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM Customer: Ameri-Kart Corp. Class: Potable Water Holding Tanks, Waste Holding Tanks, Shower Pans, Bathtubs, Sinks Location: Cassopolis, Michigan Bristol,
More informationEVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR
ICC-ES Report PMG-1368 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR DIVISION: 22 00 00 PLUMBING SECTION:
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet
More informationWF3204. Extra Height 54" Terreon Semi-Circular Washfountain. Specifications
cupc Certified 3 Rim Height 9" Deep Designed for Heavy Duty Hand Washing Reliable Air, TouchTime or Infrared activations Vandal Resistant - Easy to Clean Specifications Size and Capacity 3 floor to bowl
More informationTable of Contents ICON KEY. Quick ship icon indicates product is available for shipment within 48 hours for quantities of 4 pieces or less.
Table of Contents EYESAVER EYEWASH FAUCET COMBINATIONS Single Post Combination Eyewash & Lab Faucets... 3 Widespread Combination Eyewash & Lavatory Faucets... 3 Combination Eyewash & Lavatory Retrofit
More informationBRADLEY HALO EMERGENCY PLUMBING FIXTURES
BRADLEY HALO EMERGENCY PLUMBING FIXTURES Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash, ergonomic hand activation
More informationSeries # 17 3-Hole Widespread Faucet with Push Drain
Installation Instructions 1-0-PC Series # 1 3-Hole Widespread Faucet with Push Drain NSF/ANSI 61 Tools You Will Need Adjustable Wrench Adjustable Pliers Teflon Tape For easy installation of your faucet
More informationBRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version)
BRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version) Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash,
More informationSN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Reliable Push Button Activated Air Metering, Infrared, or TouchTime Control Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height
More informationSECTION DOMESTIC WATER PIPING SPECIALTIES
SECTION 22 11 19 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationThermostatic Valve and Trim
ML8950-xx Thermostatic Valve and Trim Description Installation instructions Trim and PL8950 valve Brass lever handles and face plate Standards ASME A112.18.1 Listed IAPMO / UPC & CUPC ADA Accessibility
More informationModel Z Sundara Float Double Basin Hand Washing System
TAG PATENT(S) PENDING Product Description Designed for modern commercial restrooms, the Sundara system delivers a superior user experience in both form and function. Crafted by world-class industrial designers
More informationThermostatic Mixing Valves
Thermostatic Mixing Valves Reliable, ASSE-listed valves from a recognized leader in flow-control products Watts.com The Trusted Choice for Thermostatic Mixing Valves Watts provides a complete thermostatic
More informationCOMMERCIAL 02 A BOOK OF QUALITY, PERFORMANCE, AND A DEDICATION TO ENGINEERING BETTER SOLUTIONS. VOLUME SPEAKMAN.COM 1
COMMERCIAL 02 DEDICATION TO ENGINEERING BETTER SOLUTIONS. A BOOK OF QUALITY, PERFORMANCE, AND A VOLUME SPEAKMAN.COM 1 Contents 01 Commercial Showering pg. 8 02 Showering Accessories pg. 30 03 Sensorflo
More informationWF2613 Classic Corner Washfountain with 9" Deep Bowl
cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Foot, Air Metering, Infrared or TouchTime Control Specifications Size and Capacity Accommodates three users
More informationGeo Series KPF-1702 / KPF-1750 Make a Bold Statement in Your Kitchen
Geo Series KPF-1702 / KPF-1750 Make a Bold Statement in Your Kitchen 02 KRAUS INTRODUCES NEW TWO-TONE FAUCETS Mixing it up with new materials 6/2014 Port Washington, NY Inspired by the growing trend of
More informationOperation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N
Operation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N 5050-0540 TITLE PAGE General Information...3 Introduction...3 Specifications...3 Physical Parameters...3 Parts Identification...4
More informationModel Z Sundara Reef Triple Basin Hand Washing System
TAG PATENT(S) PENDING Product Description Designed for modern commercial restrooms, the Sundara system delivers a superior user experience in both form and function. Crafted by world-class industrial designers
More informationEVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: MECHANICAL SECTION: COMMERCIAL-KITCHEN HOODS.
ICC-ES Report PMG-1293 Reissued 12/2016 This report is subject to renewal 12/2017 EVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: 23 00 00 MECHANICAL SECTION: 23 38 13 COMMERCIAL-KITCHEN HOODS
More informationModel Z TAS. Standards Compliance. Sundara Drift Double Basin Hand Washing System
PATENT(S) PENDING Product Description Designed for modern commercial restrooms, the Sundara system delivers a superior user experience in both form and function. Crafted by world-class industrial designers
More informationKitchen & Bath Products
Kitchen & Bath Products The Contractor Solutions plumbing collection is an outstanding line of plumbing products which are made to meet and exceed expectations. This collection offers a full line of Toilets,
More informationEffective Date: June 2018 Void After: June Product: Plumbing Fixture Fittings File No. 3889
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationRecommended Installation Practices for Residential Storage Type Water Heaters to Reduce the Danger of Scalds
Recommended Installation Practices for Residential Storage Type Water Heaters to Reduce the Danger of Scalds A White Paper Developed by the ASSE International Scald Awareness Task Group ASSE International
More informationBRADLEY CORPORATION WASH FOUNTAINS Page 1 of 8
BRADLEY WASHFOUNTAINS Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, provides a variety of commercial wash fountains for every commercial and industrial need. Constructed
More informationThe BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES
_kitchenandaundry:pcsectione.qxd 2/6/2012 4:33 PM Page 1 The BEST Plumbing Specialties. One Source. 1 BRAIDED SUPPLY - TOILET 55513 7/8 ballcock nut x 3/8 OD comp. x 9 55510 7/8 ballcock nut x 3/8 OD comp.
More informationA BOOK OF QUALITY, PERFORMANCE, AND A DEDICATION TO ENGINEERING BETTER SOLUTIONS. 01 VOLUME
A BOOK OF QUALITY, PERFORMANCE, AND A DEDICATION TO ENGINEERING BETTER SOLUTIONS. 01 VOLUME Contents 01 Commercial Shower pg. 8-29 02 Showering Accessories pg. 30-35 03 Sensorflo Faucets pg. 36-44 04 Sensorflo
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR EARLY-CLOSURE REPLACEMENT FLAPPERS OR EARLY-CLOSURE REPLACEMENT FLAPPER WITH MECHANICAL ASSEMBLIES IAPMO
More informationAuto-Diverting Tub Spout Systems
Tub/Shower Technologies Auto-Diverting Tub Spout Systems Core Product Lines ShowerStart TSV Reduces showerhead flow to trickle once bathing temp water arrives (95F) Auto-reset for next shower Universal
More informationEVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-ES Report PMG-1132 Reissued 04/2018 This report is subject to renewal 04/2019 EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION
More informationCombined Hand-Washing Systems
IAPMO IGC 127-20142018 PUBLIC REVIEW DRAFT Combined Hand-Washing Systems IAPMO Standard IAPMO IGC 127 20142018 Published: January 2014 Previous Editions: January 2014, July 2013, April 2013, April 2009,
More informationCALL FOR FLEXIBLE SOLUTIONS SHARKBITE WATER HEATER PRODUCTS
CALL FOR FLEXIBLE SOLUTIONS SHARKBITE WATER HEATER PRODUCTS E F WATER HEATER PRODUCT SOLUTIONS Water heater systems are one of the most important components for providing comfort in homes. They are often
More informationVisit. MirabelleProducts.com for full specification sheets, parts breakdown, and installation instructions
Visit MirabelleProducts.com for full specification sheets, parts breakdown, and installation instructions TABLE OF CONTENTS About Sophistispa... 4 5 collections St. Augustine... 6 7 Edenton... 8 9 Milazzo...
More informationTDB3104. Terreon 54" Semi-Circular, Deep Bowl Washfountain
cupc Certified ADA Compliant Suitable for Heavy-Duty Hand Washing Reliable Air, TouchTime or Infrared Activations Vandal Resistant - Easy to Clean Three Different Heights (Including Juvenile and Intermediate
More informationEVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-ES Report PMG-1360 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING DEVICE,
More informationHOT WATER WITH THE SNAP OF A FINGER. Mini Tanks. Basic Heaters. High Capacity Heaters. Model CMT. Model SR, M & E. Model ER Series
HOT WATER WITH THE SNAP OF A FINGER Mini Tanks Model CMT Basic Heaters Model SR, M & E High Capacity Heaters Model ER Series CHRONOMITE TANKLESS ELECTRIC WATER HEATERS Since 1966, Chronomite Laboratories
More informationNachi Series TM Z6957-XL
Nachi Series TM Wall-Mounted Sensor-Operated Lavatory Faucets for Battery or Plug-In Installations. Installation, Operation, Maintenance, and Parts Manual Z6957-XL Wall-Mounted Sensor-Operated Battery-Powered
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Plumbing Standards
Date Description of Change Pages / Sections Modified ID 8/5/17 Entire document - mgl PART 1 - INTRODUCTION 1.1 This section applies to Plumbing for campus institutional facilities. A. Purpose: Yale University
More informationHEATING WATER FOR OVER 50 YEARS
Since 1966 HEATING WATER FOR OVER 50 YEARS Point of Use Mini Tanks Model CMT Point of Use Electric Tankless Water Heaters (1.4-10 KW) Model SR, M & E Large Capacity Electric Tankless Water Heaters (10-154
More informationEVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-ES Report PMG-1360 Reissued 01/18/2018 This report is subject to renewal 10/2018 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING
More informationTOWN SQUARE 5 x 42 WHIRLPOOL AND BATHING POOL
WHIRLPOOL AND BATHING POOL TOWN SQUARE WHIRLPOOL AND BATHING POOL 2748.018W Whirlpool Massage System Acrylic with fiberglass reinforcement Pre-leveled tub bottom Two person design with center drain and
More informationHoneywell Water Solutions. Thermostatic Mixing Valves
Honeywell Water Solutions Thermostatic Mixing Valves AMX300 Thermostatic Mixing Valve Kit Key Features and Benefits Kit includes mixing valve, cold water tee, flexible 8" or 11" metal connectors, and thermostrip
More informationSN2013, SN2033 Sentry Corner Shallow Bowl Washfountains
cupc Certified Available with Infrared, Air or TouchTime 54" Bowl Size Wall-Mounted or Floor-Mounted Standard and Juvenile Height with Air (hand), TouchTime Pushbutton and Piezo or Infrared are ADA/TAS
More informationInstructions. Certifications CH Chrome SS Stainless Steel. Single Handle, Industrial Style, Pull-Down Kitchen Faucet.
Instructions *Image may vary slightly from actual product Tools Required Adjustable Wrench Groove Joint Pliers Pipe Wrench Phillips Screwdriver Pipe Tape or pipe thread compound Safety Tips If you solder
More informationTABLE 1 Electrical Specifications
CHRONOMITE HIGH CAPACITY INSTANT-TEMP WATER HEATERS INSTALLATION AND OPERATION INSTRUCTIONS (208-240V Models) (Before installation, compare electrical requirements needed for the model of heater selected)
More informationEVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-ES Report PMG-1360 Reissued 10/2018 This report is subject to renewal 10/2019 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING DEVICE,
More informationUser Manual. Hot Water Dispenser. Models: 177HWD15G 12/2018. Please read and keep these instructions. Indoor use only.
Hot Water Dispenser Models: 177HWD15G 12/2018 Please read and keep these instructions. Indoor use only. www.avantcoequipment.com 1 Specifications Model: HWD-15 Electrical: 1450W (12.0A) Water Capacity:
More informationTABLE 1 Electrical Specifications. Phase
CHRONOMITE HIGH CAPACITY INSTANT-TEMP WATER HEATERS INSTALLATION AND OPERATION INSTRUCTIONS (208-240V 3 Φ Models) (Before installation, compare electrical requirements needed for the model of heater selected)
More informationBuilding Standards Advisory Promoting construction of safe, healthy, habitable buildings
Building Standards Advisory Promoting construction of safe, healthy, habitable buildings Saskatchewan Amendments to the National Building Code 2015 In Canada, provincial and territorial governments have
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE
ICC-ES Report PMG-1083 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE DIVISION: 22 00 00 PLUMBING SECTION: 22 13
More informationInternal Use Only INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR ELECTRICAL OR HIGH-DENSITY MAGNETIC ANTI-SCALE OR WATER CONDITIONING APPLIANCE IGC 91-2009 1. PURPOSE 1.1 The purpose
More informationA. Section Joint Sealants: Seal fixtures to walls and floors.
SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2
More informationDomestic Hot Water Systems and Plumbing Products
Domestic Hot Systems and Plumbing Products Taco Catalog #100-117 Effective Date: 09/02/15 Supersedes: 06/22/15 Printed in USA Domestic Hot Recirculation Taco Domestic Hot Plumbing Products Since 1920 Taco
More informationCentral Brass. Installation Guide C O M P A N Y
Central Brass C O M P A N Y A Division of Pioneer Industries, Inc. Installation Guide Two Handle Widespread Lavatory Faucet: 101186 Series 201186 Series 181186 Series 281186 Series 101125 Series 201125
More informationVanit y Suites Collections Complete Bath Solutions
Overnight delivery available for pick up the next day! Vanit y Suites Collections Complete Bath Solutions Vanity and Mirror Limited Lifetime Warranty Lifetime warranty for defects in materials and craftsmanship
More informationThe BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES
The BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES F BRAIDED SUPPLY - TOILET - Stainless steel #304 braided supply - PVC inner hose (CSA approved) - Plated brass nuts - 100% pressure tested
More informationWater Heater Mixing Valve
Water Heater Mixing Valve improve customer satisfaction comfort Easy add on water heater accessory that increases usable hot water on existing water heaters and new energy efficient water heaters. protection
More informationPLUMBING CODE REFERENCE Second Edition
PLUMBING CODE REFERENCE Second Edition Written by American Contractors Exam Services Published by /guides 1111135940 DeWalt Plumbing Reference_CS4.indd 1 6/25/10 10:24 AM DEWALT Plumbing Code Reference:
More informationSECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
More informationEVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HYDRONIC PIPING.
ICC-ES Report Reissued 08/2016 This report is subject to renewal 08/2017 EVALUATION SUBJECT: UNIPIPE PEX-AL-PEX DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: 23 21 13 HYDRONIC
More informationAll porcelain bowls are available in black & white. Just 22" front to back. Perfect for stylists with a shorter reach!
Shampoo Bowls In-Stock 8700 Porcelain Tilting Bowl 8700-570-VB-W White 8700-570-VB Black The 8700 Porcelain tilting backwash bowl tilts 6" with a reliable tilt mechanism, and includes 570 faucet, shampoo
More informationSPEAKMAN SAFETY PRODUCTS Installation Instructions SEF-TW
SPEAKMAN SAFETY PRODUCTS Installation Instructions SEF-TW DESCRIPTION The SEF-TW is a thermostatic mixing valve kit for supplying tepid water to the Speakman SEF line of Eyewash Faucets. The thermostatic
More informationTMV45 & TMV80 Standard Thermostatic Mixing Valves
Reliable liquid-filled thermostat Integral strainer checkstops on inlets Adjustable set point within temperature range Accurate temperature control Positive shutoff of hot supply when cold supply is lost
More information