International 3691 lap, 4

Size: px
Start display at page:

Download "International 3691 lap, 4"

Transcription

1 This is a preview of "ISO 3691:1980". Click here to purchase the full 0 version from the ANSI store. International 3691 lap, 4 INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON*ME~YHAPO~HAR OP~AHM3AUtlR n0 CTAHL\aPT#3AUWWORGANlSATlON INTERNATIONALE DE NORMALISATION Powered industrial trucks - Safety code Chariots automoteurs - Code de s6curitb Second edition I The American National Standards Institute (ANSI) is the orimarv source and official sales agent for IS0 standards in the United States. ANSI was granted an exclusive license to distribute and sell IS0 standards, technical reports, drafts and other priced publications within the U.S.A Under this license agreement IS0 has granted to ANSI the right to reproduce IS0 standards and drafts within the territories of the United States. Gi UDC : Ref. No. IS (E) s2 2 Descriptors : handling equipment, industrial trucks, self-propelled machines, safety requirements, control devices, driving direction, brakes (motion arresters), accident prevention, name plate, maintenance, technical data sheets 5 L-9 0 v, Price based on 35 pages

2 1,.A -.,L 5 I..,j This is a preview of "ISO 3691:1980". Click here to purchase the full version from the ANSI store. FOREWORD IS0 (the International Organization for Standardization) is a worldwide federation of national standards institutes (IS0 member bodies). The work of developing international Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS was developed by Technical Committee ISO/TC 110, Industrial trucks. This second edition incorporates Addendum and draft Addendum 2, which were circulated to the member bodies in January 1977 and October 1978 respectively. It cancels and replaces the first edition, i.e. IS The second edition has been approved in its entirety by the member bodies of the following Austria Netherlands Sweden Belgium Poland Switzerland Czechoslovakia Romania USA France South Africa, Rep. of USSR India Spain Yugoslavia Addendum was approved by the member bodies of the following additional Brazil Bulgaria Italy Turkey Finland Korea, Rep. of Draft Addendum 2 was approved by the member bodies of the following additional Mexico The member bodies of the following countries expressed disapproval of the first edition of IS or of the Addenda 1 and 2, circulated in 1975 : The member bodies of the following countries expressed disapproval of Addendum : The member bodies of the following countries expressed disapproval of draft Addendum 2 : 0 International Organization for Standardization, 1980 Printed in Switzerland ii

3 This is a preview of "ISO 3691:1980". Click here to purchase the full version from the ANSI store. CONTENTS Page SECTION ONE : GENERAL 1 Scope and field of application References Nomenclature, classification and definitions SECTION TWO: FOR THE MANUFACTURER OF POWERED INDUS- TRIAL TRUCKS 4 Rated capacity Information plates Stability - Requirements and tests Brake performance Direction of travel - Controls Control symbols Requirements for power systems and accessories Systems and components for lifting, tilting and other movements Protective devices Ergonomic and other environmental factors SECTION THREE : FOR THE APPLICATION, OPERATION AND MAIN- TENANCE OF POWERED INDUSTRIAL TRUCKS 14 Operating safety rules and practices for the user and the operator Maintenance practices Annexes A List of national safety regulations, codes and standards concerning powered industrial trucks B Example of a check form III

4 1,.A -.,L 5 I..,j This is a preview of "ISO 3691:1980". Click here to purchase the full version from the ANSI store. FOREWORD IS0 (the International Organization for Standardization) is a worldwide federation of national standards institutes (IS0 member bodies). The work of developing international Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS was developed by Technical Committee ISO/TC 110, Industrial trucks. This second edition incorporates Addendum and draft Addendum 2, which were circulated to the member bodies in January 1977 and October 1978 respectively. It cancels and replaces the first edition, i.e. IS The second edition has been approved in its entirety by the member bodies of the following Austria Netherlands Sweden Belgium Poland Switzerland Czechoslovakia Romania USA France South Africa, Rep. of USSR India Spain Yugoslavia Addendum was approved by the member bodies of the following additional Brazil Bulgaria Italy Turkey Finland Korea, Rep. of Draft Addendum 2 was approved by the member bodies of the following additional Mexico The member bodies of the following countries expressed disapproval of the first edition of IS or of the Addenda 1 and 2, circulated in 1975 : The member bodies of the following countries expressed disapproval of Addendum : The member bodies of the following countries expressed disapproval of draft Addendum 2 : 0 International Organization for Standardization, 1980 Printed in Switzerland ii

5 This is a preview of "ISO 3691:1980". Click here to purchase the full version from the ANSI store. CONTENTS Page SECTION ONE : GENERAL 1 Scope and field of application References Nomenclature, classification and definitions SECTION TWO: FOR THE MANUFACTURER OF POWERED INDUS- TRIAL TRUCKS 4 Rated capacity Information plates Stability - Requirements and tests Brake performance Direction of travel - Controls Control symbols Requirements for power systems and accessories Systems and components for lifting, tilting and other movements Protective devices Ergonomic and other environmental factors SECTION THREE : FOR THE APPLICATION, OPERATION AND MAIN- TENANCE OF POWERED INDUSTRIAL TRUCKS 14 Operating safety rules and practices for the user and the operator Maintenance practices Annexes A List of national safety regulations, codes and standards concerning powered industrial trucks B Example of a check form III

International Standard 787/11

International Standard 787/11 International Standard 787/11 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO~HAR OPTAHM3AlJMR I-IO CTAH~APTbl3AL&lM.ORGANlSATlON INTERNATIONALE DE hjormallsation General methods of test for pigments

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference

More information

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités

More information

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number

More information

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number

More information

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l

More information

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies

More information

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet

More information

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques

More information

ILNAS-EN ISO 2692:2006

ILNAS-EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische

More information

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference

More information

ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences

ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif

More information

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination

More information

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values Metallic materials - Vickers hardness test - Part 4: Tables and hardness values EESTI

More information

International standards used locally worldwide ISO/TC 67

International standards used locally worldwide ISO/TC 67 / International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11199-2:2005 Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators Walking aids manipulated by both arms - Requirements and test methods -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 13443:2005 Natural gas - Standard reference conditions Natural gas - Standard reference conditions EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti

More information

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version) ÖNORM EN ISO 9001 Edition: 2009-08-15 Quality management systems Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version) Qualitätsmanagementsysteme Anforderungen (ISO 9001:2008 + Cor.1:2009) (konsolidierte

More information

Personal protective equipment - Safety footwear (ISO 20345:2011)

Personal protective equipment - Safety footwear (ISO 20345:2011) Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et

More information

SANS 21-1:2009 Edition 1 EN 115-1:2008

SANS 21-1:2009 Edition 1 EN 115-1:2008 ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Abrasion resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Abrasion resistance INTERNATIONAL STANDARD ISO 20871 First edition 2001-12-15 Footwear Test methods for outsoles Abrasion resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à l'abrasion Reference

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing INTERNATIONAL STANDARD ISO 22777 First edition 2004-12-15 Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing Chaussures Méthodes d'essai pour

More information

PETROLEUM AND NATURAL GAS

PETROLEUM AND NATURAL GAS IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800

More information

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) Irish Standard I.S. EN ISO 2919:2014 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) CEN 2014 No copying without NSAI permission except as

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted

More information

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear Paints and varnishes

More information

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression

More information

Plastic containers for intravenous injections (ISO 15747:2010)

Plastic containers for intravenous injections (ISO 15747:2010) Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

General requirements for establishing anthropometric databases (ISO 15535:2012)

General requirements for establishing anthropometric databases (ISO 15535:2012) Irish Standard I.S. EN ISO 15535:2012 General requirements for establishing anthropometric databases (ISO 15535:2012) CEN 2012 No copying without NSAI permission except as permitted by copyright law. The

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas Steel and iron - Determination of nitrogen

More information

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en

More information

SVENSK STANDARD SS-EN ISO 9787

SVENSK STANDARD SS-EN ISO 9787 SVENSK STANDARD SS-EN ISO 9787 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-05-28 1 1 (1+14) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés

More information

AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS

AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS /Amend.1 E/ECE/TRANS/505A 21 February 1984 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS OF APPROVAL AND RECIPROCAL RECOGNITION OF APPROVAL FOR MOTOR VEHICLE EQUIPMENT AND PARTS done at Geneva

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la

More information

ILNAS-EN ISO :2005

ILNAS-EN ISO :2005 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -

More information

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010) Irish Standard I.S. EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) NSAI 2011 No copying without

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 534:2005 Paper and board - Determination of thickness, density and specific volume Paper and board - Determination of thickness, density and specific volume EESTI STANDARDIKESKUS

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Metallic accessories Corrosion resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Metallic accessories Corrosion resistance INTERNATIONAL STANDARD ISO 22775 First edition 2004-12-01 Footwear Test methods for accessories: Metallic accessories Corrosion resistance Chaussures Méthodes d'essai pour accessoires: accessoires métalliques

More information

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number

More information

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

Personal protective equipment - Test methods for footwear (ISO 20344:2011) Irish Standard Personal protective equipment - Test methods for footwear (ISO 20344:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10405:2006 Petroleum and natural gas industries - Care and use of casing and tubing Petroleum and natural gas industries - Care and use of casing and tubing EESTI STANDARDIKESKUS

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11442:2006 Toote tehniline dokumentatsioon. Arvutil põhineva tehnilise informatsiooni töötlemine. Osa 1: Andmekaitsenõuded Technical product documentation - Document management

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard

More information

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 13690:2007 Cereals, pulses and milled products - Sampling of static batches Cereals, pulses and milled products - Sampling of static batches EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium Glass containers - Vacuum lug finishes - Part 2: 33 medium EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60410 First edition 1973 Sampling plans and procedures for inspection by attributes This English-language version is derived from the original bilingual publication by leaving

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 873:2000 Dental gypsum products Dental gypsum products EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO 873:2000 sisaldab Euroopa

More information

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) Irish Standard I.S. EN ISO 780:2015 Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) CEN 2016 No copying without NSAI permission except as permitted

More information

ISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding

ISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number

More information

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden

More information

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)

More information

ISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test

ISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test INTERNATIONAL STANDARD ISO 12957-2 First edition 2005-02-15 Geosynthetics Determination of friction characteristics Part 2: Inclined plane test Géosynthétiques Détermination des caractéristiques de frottement

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 15749-4:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes Ships and marine technology - Drainage

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation

More information

Water quality - Determination of ph (ISO 10523:2008)

Water quality - Determination of ph (ISO 10523:2008) Irish Standard Water quality - Determination of ph (ISO 10523:2008) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption INTERNATIONAL STANDARD ISO 17699 First edition 2003-10-15 Footwear Test methods for uppers and lining Water vapour permeability and absorption Chaussures Méthodes d'essai des tiges et des doublures Perméabilité

More information

ISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements

ISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie

More information

ILNAS-EN ISO 10684:2004

ILNAS-EN ISO 10684:2004 Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

ISO 5010 INTERNATIONAL STANDARD. Earth-moving machinery Rubber-tyred machines Steering requirements

ISO 5010 INTERNATIONAL STANDARD. Earth-moving machinery Rubber-tyred machines Steering requirements INTERNATIONAL STANDARD ISO 5010 Third edition 2007-06-01 Earth-moving machinery Rubber-tyred machines Steering requirements Engins de terrassement Engins équipés de pneumatiques Systèmes de direction Reference

More information

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

Dentistry - Powered scaler (ISO 18397:2016)

Dentistry - Powered scaler (ISO 18397:2016) Irish Standard I.S. EN ISO 18397:2016 Dentistry - Powered scaler (ISO 18397:2016) CEN 2016 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO 18397:2016 Incorporating

More information

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration INTERNATIONAL STANDARD ISO 22612 First edition 2005-03-01 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration Vêtements de protection contre les agents

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information