FT2080 Fire terminal (Touch) Mounting Installation
|
|
- Mervin Hood
- 6 years ago
- Views:
Transcription
1 FT080 Fire terminal (Touch) Mounting Installation Control Products and Systems
2 Legal notice Legal notice Technical specifications and availability subject to change without notice. Siemens Switzerland Ltd, 0 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Issued by: Siemens Switzerland Ltd. Division International Headquarters Gubelstrasse CH-60 Zug Tel Edition: Document ID: A6V06660
3 Table of contents Setup of fire terminal (Touch) FT Installation in 9" pedestal housing of the FC Installation in housing (standard)...9 Installation in rear panel (FT080) FHA Installation in desktop housing (FT080) FHA Technical data...
4 Setup of fire terminal (Touch) FT080 Setup of fire terminal (Touch) FT Rear panel fire terminal (Touch) FT080 Support plate Front indicator (Touch) FTO00 PMI & mainboard FCM07 x mounting hole operating unit Shield plate above carrier (CPU) 6 Hinges for wall housing
5 Setup of fire terminal (Touch) FT080 Arrangement of components Components on the fire terminal (Touch) FT080, without cover cap Front indicator (Touch) FTO00 Main network module (SAFEDLINK) on X, optional License key, optional Slot [SER_OPT] for the first serial module at X, optional Slot [SER_OPT] for the second serial module at X9, optional 6 Degraded mode network module (SAFEDLINK) on X, optional 7 CPU module (CORVUS) FCC009 8 Carrier for CPU modules FTO0 9 CPU module (MPC88) FCC006 0 PMI & mainboard FCM07 Slot X for serial module. Not required for FT080 Both slots X and X9 can hold the RS or RS8 serial module.
6 Installation in 9" pedestal housing of the FC080 Installation in 9" pedestal housing of the FC080 The installation instructions described below apply to all operating units. Before an operating terminal is installed, the following components must first be installed on the operating unit. Network module (SAFEDLINK) FN00-A with ES, for connecting to the FC080 Adapter and connection cable for the power supply Supplied with processor unit (9", FC080) FCC00-A Preparing the operating unit The network module (SAFEDLINK) FN00-A must be installed on connector X of the operating unit (main module slot) Installing the required options taking operating unit FCM08-A as an example 6
7 Installation in 9" pedestal housing of the FC080 Operating unit Flange with threaded holes for securing the module Connector strip X for network module Network module (SAFEDLINK) FN00-A with ES x fixing screw 6 PMI & mainboard FCM07 7 Adapter for power supply (including ribbon cable) 8 Connector strip X peripheral data bus connection. Plug the network module (SAFEDLINK) () into connector X () of the operating unit ().. Secure the module to mounting flange () with both screws (). Ensure that it is secured correctly to avoid interrupts.. Plug the adapter (7) into connector X (8) of the PMI & mainboard (6) so inscription 'TOP' is at the top. Installing operating unit Mounting operating terminal in door, taking operating unit FCM08-A as an example Inside of door Opening for operating unit x welded threaded bolt x mounting hole in the operating unit x fixing screw. Remove the cover plate () by removing the four nuts ().. Place the mounting holes () of the operating unit on the four threaded bolts () and screw the operating unit down with the four nuts (). 7
8 Installation in 9" pedestal housing of the FC080. The operating add-ons in the bottom window openings are installed in the same way.. Wire up the operating unit and operating add-ons according to the following wiring instructions. Wiring the fire terminal (Touch) Wiring the fire terminal (Touch) with FC080 6 Ribbon cable for FC080 system supply to card cage (CPU) X0 FCnet connection to card cage (CPU) X/X X connection to network module (SAFEDLINK) to PMI & mainboard FCM07 Inside of door (section view) Fire terminal (Touch) FT080 6 Adapter for flat cable of the supply FCnet FCnet FC080 Door FCC00 * FCM0xx A B A B A B A B A B A B X X X FN00 FN00 FN00 Example of FCnet wiring of X on PMI & mainboard FCM07 of the fire terminal (Touch) * The FCnet connection from X to X on the card cage (CPU) FCC00 is wired up in advance at the factory. 8
9 Installation in housing (standard) Installation in housing (standard) Installation of fire terminal in the housing (standard) FH00 Mains connection terminals Power supply unit (70 W) FP0 Rear panel (standard) Fire terminal board FTI00 Wiring FCnet/SAFEDLINK 6 Network module (SAFEDLINK) FN00 7 Fire terminal (Touch) FT080 X Ribbon cable connection from the fire terminal (Touch) to the fire terminal board X Supply input for fire terminal board You will find detailed information on wiring the 'fire terminal board FTI00' and the 'network module (SAFEDLINK) FN00' in document Product Data
10 Installation in rear panel (FT080) FHA09 Installation in rear panel (FT080) FHA09 The rear panel (FT080) can be used for installation in a desk or installation in a third-party housing. Installing the rear panel (FT080) in a third-party housing guarantees the required EMC protection. The installation sequence is as follows, due to the restricted space: Installing the fire terminal board FTI00 Wiring the fire terminal (Touch) Installing the fire terminal (Touch) Installing the rear panel (FT080) in a desktop View of rear panel (FT080) FHA09 Rear panel (FT080) FHA09 Rear panel (FT080) FHA09 0 V EMC filter, A with plug-in contacts Clamping bracket with screw for ground connection 0
11 Installation in rear panel (FT080) FHA09 Installing the fire terminal board FTI00 Installing the fire terminal board in the rear panel (FT080) Rear panel (FT080) FHA09 Fire terminal board FTI00 x fixing screw x mounting hole Threaded press-in sleeves in rear cover (FT080). Position the fire terminal board () in the rear panel () as shown.. Use the four fixing screws () to screw the fire terminal board () in the rear panel () firmly onto the threaded press-in sleeves ().
12 Installation in rear panel (FT080) FHA09 Wiring the fire terminal (Touch) When installing in a desktop that is thicker than mm, the cables must be routed through the rectangular openings of the rear panel (FT080), and not through the round cable breakthroughs. Wiring view of the fire terminal (Touch) in the rear panel (FT080) Fire terminal (Touch) FT080 Network module (FCnet/SAFEDLINK) FN00 FCnet connection cable Prefabricated cable for supply connection to X7 EMC filter 6 Input for DC V system supply to EMC filter 7 Fire terminal board FTI00
13 Installation in rear panel (FT080) FHA09. Wire up the flat cable from the fire terminal board X to the PMI & mainboard X.. Wire up the prefabricated cable of the supply from the EMC filter to the fire terminal board X7.. Wire up the external cables of the supply, the FCnet and the Ethernet cable through the cut-out in the desktop and the cable lead-throughs in the rear panel. Installing the fire terminal (Touch) Installing the fire terminal (Touch) in the rear panel (Touch) Fire terminal (Touch) FT080 x fixing screw x mounting hole in the fire terminal (Touch) Cable lead-through in the rear panel x threaded hole in the rear panel (FT080) 6 Lateral cable lead-throughs 7 Rear panel (FT080) FHA09 8 Cut-out in the desktop 9 Desktop
14 Installation in rear panel (FT080) FHA09. Position the wired-up fire terminal (Touch) () on the rear panel (7) as shown.. Screw the four fixing screws () through the holes () to secure the fire terminal (Touch) () into the threaded holes () in the rear panel. Installing the rear panel (FT080) in a desktop 7 6 Installing the rear panel (FT080) in a desktop Rear panel (FT080) FHA09 Mounted fire terminal (Touch) FT080 x fixing screw Mounting holes in the flanges of the rear panel (FT080) Bores in the desktop 6 Desktop 7 Cutout for rear panel (FT080) min. 0 x 68 mm. Place the rear panel () in the cut-out of the desktop (6) as shown. Ensure that the cables are not pinched.. Use the four fixing screws () to screw the rear panel () into the bores () of the desktop at the flanges ().
15 Installation in desktop housing (FT080) FHA00 Installation in desktop housing (FT080) FHA View of desktop housing (FT080) Top of desktop housing Tilting bracket for top of housing Base of desktop housing Mx0 pan head screw (scope of delivery) Clamping bracket for ground cable (scope of delivery) 6 0 V EMC filter, A with plug-in contacts (mounted) 7 Fixing screw by customer 8 Washer / mm (scope of delivery) 9 x. Rubber grommet (scope of delivery) 0 Spacer sleeves (scope of delivery) Ethernet coupling
16 Installation in desktop housing (FT080) FHA00. Remove the top of housing () by pushing the two tilting brackets () on the left and right inwards until you can lift off the top of housing.. Connect the ground connection as shown with clamping bracket () and M pan head screw ().. Place the spacer sleeves (0) from below over the rubber feet (9).. Position the housing ().. Place the washers (8) onto the rubber feet (9) inside the housing. 6. Screw the housing () tight with a screw (7) suitable for the substructure. Installing fire terminal board FTI00 Installing fire terminal board in desktop housing Base of desktop housing Fire terminal board FTI00 6x fixing screw (scope of delivery) Spacer with thread in rear panel. Position the fire terminal board () in the housing () as shown.. Screw the fire terminal board () firmly onto the spacers () in the housing () using the four fixing screws (). 6
17 Installation in desktop housing (FT080) FHA00 Installing fire terminal (Touch) FT080 Mounting fire terminal in the cover of the desktop housing Tilting brackets on left and right for fixing the cover x fixing screw for tilting brackets and fire terminal x fixing screw for fire terminal Fire terminal (Touch) FT080 Cover of desktop housing (FT080) FHA00. Place the fire terminal () in the cover () of the desktop housing as shown.. Screw the tilting brackets () into the cover on the left and right as shown through the top holes in the fire terminal ().. Due to the restricted space available, connect the Ethernet cable to plug X before mounting the fire terminal (Touch).. Use the two other screws to screw the fire terminal () into the cover through the bottom holes. 7
18 Installation in desktop housing (FT080) FHA00 Assembly of desktop housing (FT080) 6 Assembly of desktop housing Fire terminal (Touch) FT080 Cover of desktop housing (FT080) FHA00 Tilting brackets on left and right for fixing the cover Guide cams on left and right for tilting brackets x threaded holes for mounting cover 6 Base of desktop housing 7 Fire terminal board FTI00. Move the cover () with the installed fire terminal () to the position shown.. Gently press the two tilting brackets () inwards and lift the cover () into the two guide cams (). a The cover is fixed in the open position and the tilting brackets act like hinges. 8
19 Installation in desktop housing (FT080) FHA00 Securing cover for desktop housing Securing cap (scope of delivery) Opening for fixing screw Cover for desktop housing (Touch) Fixing screw with securing device. To close the housing, tilt the cover () onto the housing and secure the cover to the housing using both screws ().. Close the openings for the fixing screws () using both securing caps () 9
20 Installation in desktop housing (FT080) FHA00 Fire terminal wiring Wiring view of the fire terminal in the desktop housing Fire terminal (Touch) FT080 Network module (FCnet/SAFEDLINK) FN00 Fire terminal board FTI00 Prefabricated cable for supply connection to X7 fire terminal board FCnet connection cable 6 EMC filter 7 Input for DC V system supply to EMC filter 8 Internal cable RJ for Ethernet connection, L=0 mm 0
21 Technical data 6 6 Technical data Supply input Voltage DC 0 0 V Quiescent current (display illumination dimmed %) Maximum current (display illumination 00% and lamp test active) 90 ma 700 ma Display Screen size " Resolution 80 x 800 pixels Interfaces x slots for serial modules RS module for event printer RS8 module for ESPA-.. interface, FAT, FBF, UGA or remote EVAC-NL operation x slot for network modules (SAFEDLINK) x Ethernet connection RJ x connection for peripheral data bus Full functionality incl. degraded mode function Degraded mode function only 0/00 Mbit/s X00 Ambient conditions Operating temperature -8 + C Storage temperature C Moisture, condensation not permitted Protection category (IEC609) Max. 9 % rel. IP0 Mechanical data Dimensions (W x H x D) 7 x 00 x mm Weight without options Color FT080-A: g Foil: RAL900 pure white, RAL9006 white aluminum Standards and approvals VdS G Siemens Switzerland Ltd, Gubelstrasse FT080 CH-60 Zug, Switzerland Technical data: see doc FT080 - Control and Indicating Terminal for use in fire detection and fire alarm systems installed in buildings 00/08/EC (EMC): EN 00- / EN ; 006/9/EC (LVD): EN ; 0/6/EU (RoHS): EN 08 ; Declared performance and conformity can be seen in the Declaration of Performance and the EC Declaration of Conformity, which is obtainable via the Customer Support center: Tel or
22 Issued by Siemens Switzerland Ltd Division International Headquarters Gubelstrasse CH-60 Zug Tel Siemens Switzerland Ltd, 0 Technical specifications and availability subject to change without notice. Document ID AQ00068 FS0 Edition
FT2080 Fire terminal (Touch) Mounting Installation
FT080 Fire terminal (Touch) Mounting Installation 06-0-08 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationFire control panels FC360
Cerberus TM FIT Fire control panels FC360 FC361-ZZ, FC361-ZA, FC361-YZ, FC361-YA Fire control panels (1-loop) for addressable peripheral devices with integrated operating unit One loop with 126 addresses
More informationFC722 Fire control panel
FC722 Fire control panel Series FS720 (MPXS) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as
More informationFC2040. Fire control panel. Sinteso. FS20 series, MP6
FC2040 Sinteso Fire control panel FS20 series, MP6 Compact, pre-assembled, microprocessor-controlled fire control panel with integrated operating unit for up to 504 addresses Fire control panel can be
More informationFire control panels FC726 FC726-XA
Fire control panels FC726 FC726-XA Modular, pre-confectioned, microprocessor-controlled fire control panel for up to max. 1512 device addresses Integrated, user-friendly operating unit Detection and automatic
More informationFC724 Fire control panel
FC724 Fire control panel Series FS720 (IP4) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as
More informationFC722 Fire control panel
FC722 Fire control panel Series FS720 (IP4) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as
More informationFire control panel for modernization
Sinteso Fire control panel for modernization FC2030 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso. Fire control panel for a maximum
More informationFC724 Fire control panel
FC724 Fire control panel Series FS720 (IP5) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as
More informationFC723 Fire control panel
FC723 Fire control panel FS720 series (IP5) Cerberus PRO Modular, prefabricated, microprocessor-controlled fire control panel with integrated user-friendly operating unit for up to max. 756 addresses Processes
More informationFC2020 Fire control panel
FC2020 Fire control panel Series FS20 (MP4.0) Sinteso Compact, prefabricated, microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as stand-alone
More informationFS20 Fire detection system
FS20 Fire detection system Components / Spare parts / Repair parts Market package 6 2015-10-23 Control Products and Systems Legal notice Technical specifications and availability subject to change without
More informationMimic display driver, LED ribbon cable
Sinteso / Cerberus PRO Mimic display driver, LED ribbon cable FT2001-A1, F50F410 FDnet/C-NET mimic display driver and LED ribbon cable for the fire detection systems Sinteso FS20 and Cerberus PRO FS720.
More informationOutput module (230 V)
Cerberus FIT Output module (30 V) FCA109-Z1 Output module for use in monitored output lines Output with potential-free relay contacts for controlling fire ventilators, air conditioning systems, elevators,
More informationInput module, input/output modules
Sinteso / Cerberus PRO Input module, input/output modules FDCI222, FDCIO222, FDCIO224 Input module and input/output modules for the automatically addressed detector line Input module FDCI222: Four monitored
More informationMulti line separator module
Sinteso Cerberus PRO Multi line separator module FDCL221-M Multi line separator module, addressed (FDnet/C-NET) Automatic module with several separate line separators Formation of stub lines (T-branches)
More information13 tones to choose from, 2 programmable alarm levels Adjustable sound levels up to 93 dba
Cerberus PRO Cerberus FIT Interbases DBS721, DBS728, DBS729 Sounder interbase, sounder beacon interbase, sounder interbase with supplementary optical indication for the automatically addressable detector
More informationInput module, input/output module
Sinteso / Cerberus PRO Input module, input/output module FDCI221, FDCIO221 Input module and input/output module for the automatically addressed detector line Input module FDCI221: Monitorable contact input
More informationFP120-Z1 Power supply kit A (70 W) Technical Manual
FP120-Z1 Power supply kit A (70 W) Technical Manual 2015-07-08 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationSinteso TM product catalog.
Sinteso product catalog Sinteso TM product catalog. Fire protection products and accessories. Siemens Switzerland Ltd Building Technologies Group International Headquarters Gubelstrasse 22 CH-6301 Zug
More informationInterbases. Sinteso FDSB221, FDSB228, FDSB229
Sinteso Interbases FDSB221, FDSB228, FDSB229 Sounder interbase, sounder beacon interbase, sounder interbase with supplementary optical indication for the automatically addressable detector bus FDnet Addressed
More informationFDBZ290 Air sampling smoke detection kit
FDBZ290 Air sampling smoke detection kit Sinteso Cerberus PRO Reliable monitoring for smoke of supply air, exhaust air and recirculation ducts of air conditioning and ventilation systems Suitable for air
More informationManual call points. Sinteso / Cerberus PRO FDM225, FDM226
Sinteso / Cerberus PRO Manual call points FDM225, FDM226 Manual call points with direct activation for the FDnet/C-NET automatic addressable detector bus Manual call points for addressed Sinteso FS20 and
More informationFDBZ290 Air sampling smoke detection kit
FDBZ290 Air sampling smoke detection kit Sinteso Cerberus PRO Reliable monitoring for smoke of supply air, exhaust air and recirculation ducts of air conditioning and ventilation systems Suitable for air
More informationOOH740, OOHC740. Cerberus PRO. Automatic fire detectors
Cerberus PRO OOH740, OOHC740 Automatic fire detectors ASAtechnology For the automatically addressable detector bus C-NET collective / conventional (OOH740 only) Signal processing with ASAtechnology Event-controlled
More informationOH720, OP720, HI720, HI722
Cerberus PRO OH720, OP720, HI720, HI722 Automatic fire detectors For the automatically addressable detector bus C-NET The ideal fire detector for every application Signal processing with detection algorithms
More informationFDM273 Radio manual call point Mounting
FDM273 Radio manual call point Mounting 2016-11-28 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction,
More informationFDF Sinteso Cerberus PRO Cerberus FIT. Flame detector. Flame detector addressed or collective, ASAtechnology TM
Sinteso Cerberus PRO Cerberus FIT FDF241-9 Flame detector Flame detector addressed or collective, ASAtechnology TM Reliable detection using three infrared sensors and ASAtechnology (indoor and outdoor
More informationManual call point. Sinteso Cerberus PRO FDM223H, FDM224H. 'Heavy Duty' manual call point addressed (FDnet/C-NET)
Sinteso Cerberus PRO Manual call point FDM223H, FDM224H 'Heavy Duty' manual call point addressed (FDnet/C-NET) Manual call points for addressed Sinteso FS20 and Cerberus PRO FS720 fire detection systems
More informationFDCW241 Radio gateway Mounting
FDCW241 Radio gateway Mounting 2017-01-05 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction, dissemination
More informationSiemens aspirating smoke detector (ASD) for the addressed FDnet/C-NET detector line or for standalone operation
Sinteso Cerberus PRO FDA241, FDA221 ASD Aspirating smoke detector Siemens aspirating smoke detector (ASD) for the addressed FDnet/C-NET detector line or for standalone operation Patented technology Early
More informationASA linear smoke detector
Sinteso / Cerberus PRO ASA linear smoke detector FDL241-9 Linear smoke detector, used addressed or collectively, ASAtechnology TM Reliable smoke detection in large spaces (indoor application) Detection
More informationFS720 Fire detection system Planning
FS720 Fire detection system Planning IP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction,
More informationDM1101 / DM1103 / DM1104 DM1103-L / DM1103-S Manual call points Manual release button and emergency stop button
DM1101 / DM1103 / DM1104 DM1103-L / DM1103-S Manual call points Manual release button and emergency stop button collective/synoline600 AlgoRex Synova Manual call point to all fire detection system control
More informationFDCL221-M Multi line separator module
FDCL221-M Multi line separator module addressable (FDnet/C-NET) Sinteso TM Cerberus PRO Automatic module with several line separators Creation of T taps (stub lines) in the FDnet/C-NET Operation of the
More informationDBS721, DBS729 Sounder interbase, Sounder beacon interbase
DBS721, DBS729 Sounder interbase, Sounder beacon interbase For the automatic addressable detector bus C-NET Cerberus PRO Sounder interbase DBS721 and sounder beacon interbase DBS729 11 selectable tones,
More informationDM1131 / DM1133 / DM1134 Manual call points
DM1131 / DM1133 / DM1134 Manual call points AnalogPLUS/SynoLOOP AlgoRex Synova Manual call points to the fire detection system AnalogPLUS/SynoLOOP Manual call point DM1131 with direct operation Manual
More informationFDS229-R / FDS229-A Alarm sounder with supplementary optical indication
FDS229-R / FDS229-A Alarm sounder with supplementary optical indication For the automatic addressable detector bus C-NET and FDnet Cerberus PRO Sinteso Alarm sounder with 11 tonalities selectable, 2 activation
More informationQAF63.2-J QAF63.6-J. Frost detectors. for use on the air side
s Frost detectors for use on the air side QAF63.2-J QAF63.6-J Active capillary tube sensor for acquiring the lowest temperature within a range of 0 15 C Operating voltage AC 24 V Signal output DC 0...10
More informationFDOOT221, FDO221, FDT221
Sinteso C-LINE FDOOT221, FDO221, FDT221 Automatic fire detectors For the automatically addressed detector bus FDnet The ideal fire detector for every application Signal processing with detection algorithms
More informationFDOOT241-9, FDOOT241-A, FDO241, FDT241
Sinteso S-LINE FDOOT241-9, FDOOT241-A, FDO241, FDT241 Automatic fire detectors For the automatically addressed detector bus FDnet The ideal fire detector for every application Line separators for uninterrupted
More informationCall stations and extensions
Novigo Call stations and extensions PT2001-A1, PT2002-A1, PT2008-A1, PT2009-A1, PTO2001-A1, PTO2002-A1, PTO2003-A1, PTO2004-A1, PTO2005-A1, PTO2006-A1, PTO2008-A1 EN 54-16-certified alarm and business
More informationDC1154 / DC1154-AA / DC1156-AA / DC1157-AA Input / Output modules
DC1154 / DC1154-AA / DC1156-AA / DC1157-AA Input / Output modules Interactive AlgoRex DC1150 Series Thanks to its robust construction, the line modules can be used in both dry and dusty / wet areas Housing
More informationFDOOT241-A3, FDOOT241-A4, FDOOT241-A5, FDOOT241-A9, FDOOT241-8
Sinteso S-LINE FDOOT241-A3, FDOOT241-A4, FDOOT241-A5, FDOOT241-A9, FDOOT241-8 Multisensor fire detectors Multi-sensor fire detector for gradual modernization with ASAtechnology For the modernization of
More informationDC1192 Input /Output module
DC1192 Input /Output module Interactive, AnalogPLUS/SynoLOOP, collective/synoline600 AlgoRex Synova In-/output module suitable for collective fire detection system as detection line coupler interactive
More informationRadio fire detection system
OEM Radio fire detection system FDOOT271-O, FDM273-O, FDM275-O Radio fire detection system Multihop mesh technology High transmission reliability thanks to the use of independent communication paths transmission
More informationDT1101A / DT1102A / DO110xA Automatic fire detectors
DT1101A / DT1102A / DO110xA Automatic fire detectors collective/synoline600 AlgoRex Synova High degree of reliability and stability Compatible with all control units with collective/synoline600 detector
More informationQFM41.. Duct sensors QFM41.. AQF4150 AQF3153. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 1859P04 QFM41.. AQF4150 AQF3153 Symaro Duct sensors for relative humidity and temperature with calibration certificates QFM41.. Operating voltage AC 24 V / DC 13.5...35 V Signal output
More informationOOH740, OOHC740 Automatic fire detectors
OOH740, OOHC740 Automatic fire detectors ASAtechnology TM For the automatic addressable detector bus C-NET Collective / Conventional (OOH740 only) Cerberus PRO Signal processing with ASAtechnology TM Event-controlled
More informationFC330A-ECO Auto-addressing analogue 1-Loop fire detection panel
FC330A-ECO Auto-addressing analogue 1-Loop fire detection panel Synova TM Commissioning in no time thanks to automatic address allocation Auto-addressing makes setting dip switches unnecessary Automatic
More informationFS720 Fire detection system (marine) Technical Manual
FS720 Fire detection system (marine) Technical Manual 2016-05-10 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationDB110xA, DB1131A, SO620A, DB1151A Detector bases and accessories
DB110xA, DB1131A, SO620A, DB1151A Detector bases and accessories interactive, AnalogPLUS/SynoLOOP, collective/synoline600 AlgoRex Synova TM Base made of impact and scratch-proof plastic Screw less terminals
More informationFDCW221 / DOW1171 / SMF121 SMF6120 (repair/replacement) Radio fire detection system
FDCW221 / DOW1171 / SMF121 SMF6120 (repair/replacement) Radio fire detection system Addressed (FDnet) Sinteso Full integration into FS20, SIGMASYS, and AlgoRex fire detection systems Simultaneous operation
More informationFDCIO223 (ES 45) Transponder
FDCIO223 (ES 45) Transponder Addressed (FDnet/C-NET) Sinteso Cerberus PRO 2 monitored inputs/outputs, which can optionally be used as a detector line (collective Siemens/Cerberus, Synova 600, or collective
More information1592P01. for liquids in piping DN
1 594 1592P01 Flow switch for liquids in piping DN 20 200. QVE1901 Contact load / switching capacity: max. AC 230 V, 1 A, 26 VA max. DC 48 V, 1 A, 20 W Nominal pressure PN25 Manual setting of contact type
More informationRoom thermostat with 24-hour time switch and large LCD
Room thermostat with 24-hour time switch and large LCD RDJ100 Programmable, for heating systems Operating modes: Automatic, Comfort, Energy saving, and Frost protection Large LCD display Battery powered:
More informationFDOOT241-A9-Ex Multisensor fire detector
FDOOT241-A9-Ex Multisensor fire detector ASAtechnology TM For potentially explosive areas Sinteso Collective Signal processing with ASAtechnology Multiple protocol detector (collective/fdnet-ex) Event-controlled
More informationFrost Protection Thermostat
1 203 Frost Protection Thermostat Electromechanical thermal reset limit thermostat RAK-TW.5..H RAK-TW.5..H.. Use Monitoring of frost protection temperature, with single-pole changeover microswitch Switching
More informationDM1153H-Ex / DM1154H-Ex Manual call point 'Heavy Duty'-Ex
DM1153H-Ex / DM1154H-Ex Manual call point 'Heavy Duty'-Ex Interactive, for explosion-hazard area of zones 1 and 2 AlgoRex Manual call point to the interactive fire detection system with microprocessor,
More informationFC721 Fire control panel Technical Manual
FC721 Fire control panel Technical Manual IP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationFlush-mounted room thermostat
3 078 Flush-mounted room thermostat, for CAV / VAV heating and cooling systems, for AHU systems, for universal heating and cooling systems RDU340 Modulating PI control Control depending on the room or
More informationSynova TM product catalog.
Synova product catalog Synova TM product catalog. Fire protection products and accessories. Siemens Switzerland Ltd Building Technologies Group International Headquarters Gubelstrasse 22 CH-6301 Zug Tel
More informationFDCL221-Ex Line adapter (Ex)
FDCL221-Ex Line adapter (Ex) Addressed (FDnet-Ex/C-NET-Ex) For operating FDnet-Ex/C-NET-Ex peripheral devices in potentially explosive areas Sinteso Cerberus PRO Electrical isolation of Ex and non-ex lines
More informationDF1151-Ex Infrared flame detector
DF1151-Ex Infrared flame detector Interactive, for explosion-hazard areas of zones 1 and 2 AlgoRex For inside and outside applications Triple-sensor evaluation Detection in various wavelengths Microprocessor-controlled
More informationDuct Temperature Sensors
1 761 1761P03 1761P01 1761P02 Mounting flange AQM63.0 QAM2110.040, QAM2120.040 QAM2120.200, QAM2120.600 Symaro Duct Temperature Sensors QAM21... Passive sensors for acquiring the air temperature in air
More informationElectronic timeswitch
Electronic timeswitch RWB1007 To control combination boilers and single zone applications together with the appropriate thermostat. Easy-to-read backlit display Time programming 7-day 2/3 ON/OFFs Advance
More informationDF1101-Ex Infrared flame detector
DF1101-Ex Infrared flame detector Collective/SynoLINE 600 for explosion-hazard areas of zones 1 and 2 AlgoRex Synova Sinteso Cerberus PRO For inside and outside applications Triple-sensor evaluation Detection
More informationTest units and accessories
Sinteso Test units and accessories FDUL221, FDUD29x, FDUD29x-E, RE6, REF8, REF8-S, REF8-C, RE8, RE8-S, RE8-C, RE7T, RE8ST, RE8STCO, RE8-CO, RE7T-x, RE10, FDUM29x, FDLU291, LE3, StabexHF Test units to test
More informationSOL-LX-W, SOL-LX-C, RoLP-LX, RoLP Sounder, beacon, and sounderbeacon
SOL-LX-W, SOL-LX-C, RoLP-LX, RoLP Sounder, beacon, and sounderbeacon alarm devices For fire detector and extinguishing systems Loud alarm signal clearly recognizable as a danger signal even in noisy environments
More informationFDCI221, FDCIO221 Input module, input/output module Technical Manual
FDCI221, FDCIO221 Input module, input/output module Technical Manual 2012-09-30 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without
More informationOOH740-A9-Ex Multisensor fire detector
OOH740-A9-Ex Multisensor fire detector ASAtechnology TM For potentially explosive areas Cerberus PRO Collective Signal processing with ASAtechnology Multiple protocol detector (collective/c-net-ex) Event-controlled
More informationFrost Units for air temperature monitoring
284 284P0 Frost Units for air temperature monitoring QAF8... Robust aluminium die-cast housing Responds to temperature change sensed over any 30 cm length of capillary Small switching differential Good
More informationSWING radio fire detection system
Sinteso / Cerberus PRO SWING radio fire detection system FDCW241, FDOOT271, FDM273, FDM275, FDM275(F), FXS2061 SWING radio fire detection system Multihop mesh technology Full integration into the fire
More informationThermal Reset Limit Thermostats Electromechanical TW according to DIN EN 14597
1 202 Thermal Reset Limit Thermostats Electromechanical TW according to DIN EN 14597 RAK-TW.1..H RAK-TW.1..H.. Use Function Changeover switch (S.P.D.T.) 2-position thermal reset limit thermostat with single-pole
More informationFDL241-9 Linear smoke detector Mounting Commissioning
FDL241-9 Linear smoke detector Mounting Commissioning 2014-06-27 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. 2011-2014
More informationFDBZ290 Air sampling smoke detection kit Technical Manual
FDBZ290 Air sampling smoke detection kit Technical Manual 2015-12-17 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationDOW1171 / DCW1151 Radio fire detection system
DOW1171 / DCW1151 Radio fire detection system Interactive AlgoRex Complete integration in the interactive fire detection system CS1140 Simultaneous operation of wired and wireless fire detectors New possibilities
More informationFC700A Fire detection control unit
FC700A Fire detection control unit Synova 4-16 Loop analogue addressable control panel 128 devices per loop (SynoLOOP) and up to 1000 devices per panel Up to 24 collective lines for Synova TM 600 serie
More informationTest units and accessories
Cerberus PRO Test units and accessories FDUL221, DX791, RE6, REF8, REF8-S, REF8-C, RE8, RE8-S, RE8-C, RE7T, RE8ST, RE8STCO, RE8-CO, RE7T-x, RE10, FDUM29x, FDLU291, LE3, StabexHF Test units to test detectors
More informationOOH740-A9-Ex Multi-sensor fire detector
OOH740-A9-Ex Multi-sensor fire detector ASAtechnology TM For potentially explosive areas Cerberus PRO Collective Signal processing with ASAtechnology Multiple protocol detector (collective/c-net-ex) Event-controlled
More informationQAF63.2 QAF63.6. Frost sensors for use on the air side. Building Technologies HVAC Products
1 821 1821P01 Frost sensors for use on the air side Active capillary tube sensor for measuring the lowest temperature within a range of 0 15 C Operating voltage AC 24 V Signal output DC 0...10 V Use On
More informationFDA241, FDA221 Siemens ASD
FDA241, FDA221 Siemens ASD Patented Technology Sinteso TM Cerberus PRO Compatible with the Siemens FDnet/C-NET loops (requires FDCC221S option) Advanced dual Wavelength optical detection (Blue & Infra-red)
More informationFDA241, FDA221 Siemens ASD
FDA241, FDA221 Siemens ASD Patented Technology Compatible with the Siemens FDnet/C-NET loops (requires FDCC221S option) Advanced dual Wavelength optical detection (Blue & Infra-red) Configurable as a Standalone
More informationFDCL221 Line separator
FDCL221 Line separator Technical manual Fire Safety & Security Products Technical specifications and availability subject to change without notice. 2004-2009 Copyright Siemens, Inc. We reserve all rights
More information5000 Series Rack Panels
5000 Series Rack Panels The operation and functions described in this manual are available from Software Version Mx5000-050-04 onwards. Specifications & Ordering: Models, Sales Order Parts: Mx-5101xR Panel
More informationRoom Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
More informationMK8000 OPC Server Interface Specification for CS1115 Building Technologies
MK8000 OPC Server Interface Specification for CS1115 Data and design subject to change without notice. / Supply subject to availability. Copyright by Siemens Switzerland Ltd We reserve all rights in this
More informationQXA2100. Condensation monitor QXA2101. Monitor to prevent damage caused by condensation on chilled ceilings and HVAC plants with AC/DC 24 V power.
QXA2100 Condensation monitor QXA2100 Monitor to prevent damage caused by condensation on chilled ceilings and HVAC plants with AC/DC 24 V power. Application Monitors condensation build up in buildings
More informationoptris Outdoor protective housing
Operator s Manual optris Outdoor protective housing for PI/Xi camera, CSlaser LT, CTlaser LT, USB server and industrial PIF Optris GmbH Ferdinand-Buisson-Str. 14 13127 Berlin Germany Tel.: +49 30 500 197-0
More informationFlush-mounted room thermostats
s 3 RDF300, RDF300.02, RDF340 RDF600 076 RDF400.01 RDF600 Flush-mounted room thermostats RDF300 RDF340 RDF400 for 2-pipe, 2-pipe with el. heater and 4-pipe fan coil units for use with compressors in DX
More informationFC121-ZA / FC122-ZA / FC123-ZA / FC124-ZA
Fire Control Panel FC121-ZA / FC122-ZA / FC123-ZA / FC124-ZA Technical Manual 2014-05-28 Control Products and Systems Legal notice Technical specifications and availability subject to change without notice.
More informationRoom Temperature Controller
3 022 Room Temperature Controller for two-pipe fan coil units with electrical heater RCC20 Outputs for on / off valve actuator and electrical heater Output for three-speed fan Control depending on the
More informationSemi flush-mount room thermostat with KNX communications For VAV heating and cooling systems
s 3 72 Semi flush-mount room thermostat with KNX communications For VAV heating and cooling systems RDU34 KNX bus communications (S-mode and LTE mode) Backlit display PI / P control Outputs for DC 0 0
More informationService Instructions
BASIC EXCELLENT PERFECT U Universal ovens I Incubators S Sterilisers Service Instructions Mo Tu We Th Fr Sa Su t3 on off h t2 t1 t4 loop 4 3 2 1 STERI DEFRO C MIN MAX C IN 1 IN 2 OUT IN 1 IN 2 OUT % rh
More informationCerberus FIT conventional system
Cerberus FIT conventional system Combining intelligent signal processing and easy installation for reliable fire detection and alarming www.siemens.com/cerberus-fit Reliable, intelligent and cost-efficient
More informationHarvey Chemiclave EC Series Sterilizers
BARNSTEAD THERMOLYNE CORPORATION CHEMICLAVE EC SERIES STERILIZERS Harvey Chemiclave EC Series Sterilizers PARTS CATALOG LT1121x 12/10/98 1 Final Assembly - Refer to Figure 1 Figure Page 1 Final Assembly
More informationBuilding Technologies SIGMASYS M Multifunctional danger alarm control and indicating panel
R33/422 Building Technologies SIGMASYS M Multifunctional danger alarm control and indicating panel SIGMASYS M multifunctional danger alarm control and indicating panel Application Description Features
More informationARCHITECT AND ENGINEER SPECIFICATIONS
s Desigo Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the 252- point and 504-point systems One (1) or (2) two-heightunit
More informationFT2011 Floor repeater display Operation Manual
FT2011 Floor repeater display Operation Manual MP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationSemi flush-mount communicating room thermostats
s 3 7 RDF30, RDF600KN RDF30.50, RDF600KN/S RDF30.50H Semi flush-mount communicating room thermostats For 2-pipe, 2-pipe with electric heater, and 4-pipe fan coil units For use with compressors in DX type
More information