ДТУ ВИЗАРД СИСТЕМИ ДООЕЛ CA-5

Transcription

1 ДТУ ВИЗАРД СИСТЕМИ ДООЕЛ Ул. Црноризец Храбар бр. 32, 1000 Скопје Тел (0) , +389 (0) , +389 (0) ДБ. MK Комерцијална Банка Ж.С-ка Прокредит Банка Ж.С-ка Web: wizard.com.mk Alarm Systems and intelligent security solutions No. Image Specification Unit price години CA-5 SATEL Control Panel CA-5 P Wired alarm control panel The CA-5 control panel have 5 on board zones support for NC, NO, EOL, 2EOL/NC and 2EOL/NO loop configurations ; 3 outputs (bell output + 2 PGM ) ; RS-232 port (TTL) - RJ type socket ; On-board PSTN telephone dialer for reporting, messaging and remote uploading/downloading ;System codes: 1 master user code, up to 5 user codes, 1 service code ; Event log with 255 entries ; Monitoring using Contact ID,and 2 monitoring stations numbers. SATEL LED keypad CA-5 KLED-S LED keypad for CA-5 control panel LEDs for zones state indication ; Keypad hold-down PANIC, FIRE and AUX alarms ; Keypad backlight ; Buzzer for acoustic signaling ; Communication loss indication ; Supply voltage: 12 V DC ; Standby mode current consumption: 15 ma SATEL LCD Keypad CA-5 KLCD-S LCD keypad for CA-5 control panel The keypad is intended for daily operation of the CA-5 system. The LCD display presents text messages, which makes it easy and intuitive to use the functions of the control panel. LEDs for system state indication ; Keypad hold-down PANIC, FIRE and AUX alarms ; Keypad and display backlight ; Buzzer for acoustic signaling ; Communication loss indication SATEL LCD Keypad CA-5 BLUE-S LCD keypad for CA-5 control panel The keypad is intended for daily operation of the CA-5 system. The LCD display presents text messages, which makes it easy and intuitive to use the functions of the control panel. LEDs for system state indication ; Keypad hold-down PANIC, FIRE and AUX alarms ; Keypad and display backlight ; Buzzer for acoustic signaling ; Communication loss indication 1.990, , , ,00

2 години 3 години 3 години 3 години SATEL Control Panel VERSA 5 - HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel EN50131 Grade 2 compliance ; 5 zones expandable up to 30: NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations, detectors supervision; Additional tamper input ; 4 up to 12 PGM ; 2 supply outputs ; 2 partitions: 3 arming modes for each partition, arming/disarming by users or timer controlled ; RS-232 port (RJ type socket) for panel programming built-in telephone dialer and communicator for reporting (SIA, Contact ID), (8 telephone numbers, 64 text/16 voice messages), voice/sms messaging ; Support for TCP/IP communicator: e- mail messaging, TCP/IP reporting ; keypads (up to 6), VERSA-LCDM- WRL wireless keypads,int-tsg touchscreen keypads,), proximity tags/cards (up to 6 readers), Support for 31 user codes: 30 standard users, 1 installer ; Event log with 2047 entries. SATEL Control Panel VERSA 10 HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel EN50131 Grade 2 compliance ; 10 zones expandable up to 30: NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations, support for vibration and roller shutter detectors, detectors supervision ; 4 up to 12 PGM ; 2 supply outputs; 2 partitions: 3 arming modes for each partition, arming/disarming by users or timer controlled ; communication bus for keypads, readers and expansion modules ; RS-232 port (RJ type socket) for panel programming built-in telephone dialer and communicator for reporting (SIA, Contact ID),(8 telephone numbers, 64 text/16 voice messages); Support for GSM/GPRS communicator: SMS/GPRS reporting, voice/sms messaging; Support for TCP/IP communicator: messaging, TCP/IP reporting; keypads (up to 6), VERSA-LCDM-WRL wireless keypads,int-tsg touchscreen keypads,), proximity tags/cards (up to 6 readers); Support for 31 user codes: 30 standard users, 1 installer ; Event log with 2047 entries. SATEL Control Panel VERSA 15 HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel EN50131 Grade 2 compliance ; 15 zones expandable up to 30: NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations, support for vibration and roller shutter detectors, detectors supervision ; 4 up to 12 PGM ; 2 supply outputs; 2 partitions: 3 arming modes for each partition, arming/disarming by users or timer controlled ; communication bus for keypads, readers and expansion modules ; RS-232 port (RJ type socket) for panel programming built-in telephone dialer and communicator for reporting (SIA, Contact ID),(8 telephone numbers, 64 text/16 voice messages); Support for GSM/GPRS communicator: SMS/GPRS reporting, voice/sms messaging; Support for TCP/IP communicator: messaging, TCP/IP reporting; keypads (up to 6), VERSA-LCDM-WRL wireless keypads,int-tsg touchscreen keypads,), proximity tags/cards (up to 6 readers); Support for 31 user codes: 30 standard users, 1 installer ; Event log with 2047 entries. SATEL Control Panel VERSA PLUS HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel with plastic box OPU-4P Ideally suited, offering flexible configuration and versatility while maintaining the highest level of security that is available from anywhere in the world such is the alarm system based on the VERSA Plus control panel. It is a dedicated solution for people who care as much for quality, functionality, simple and intuitive use, as for fast and clean installation. Capability to create a wireless, wired or hybrid system; Control panel with already built-in Ethernet, GSM/GPRS, voice and acoustic alarm verification modules: - Ethernet (mobile application, PUSH notifications, , , , ,00

3 messages, reporting to monitoring station) - GSM/GPRS (SMS, CLIP, reporting to monitoring station) - PSTN (voice messaging, reporting to monitoring station) Convenient and economical messaging: messages, PUSH notifications; Fully wireless operation: dedicated keypad with proximity card / key tag reader, capability to operate the system via a multifunction keyfob; Remote access and system control : dedicated application for Android, ios smartphones and tablets; 4 programmable wired zones (with expansion capability up to 30): support for NO and NC type detectors, and roller shutter and vibration detectors, support for EOL and 2EOL configuration; 5 programmable wired outputs (with expansion capability up to 12): 2 high-current outputs, 2 high-current outputs, OC type, 1 relay output; 3 power outputs; System subdivision into 2 partitions: each zone can be assigned to two partitions; Integrated PSTN module to enable: reporting (SIA, ContactID, etc.), voice messaging (8 numbers, 16 messages), remote programming (300 bps modem) with DLOADX program; Integrated GSM/GPRS module to enable: voice/sms messaging, SMS/GPRS reporting, support for 2 SIM cards, programming with DLOADX program; Built-in ETHM module to enable: messaging, control by means of VERSA CONTROL application offering PUSH notifications, reporting to monitoring station, programming with DLOADX program; Built-in voice module: nearly 13 minutes for messages to be used in voice menu, over 4 minutes for 16 telephone notification messages (with message duration up to 16 seconds); Built-in USB-HID socket; Memory of 2047 events; Capability to handle 30 users and assign to each of them: code, proximity card, keyfob; 4 timers to enable automatic: arming/disarming partitions, control of outputs (turning light ON/OFF, watering garden, etc.) SATEL VERSA-LED-BL LED keypad for VERSA panels LED indicators for zones, system and partitions status; PANIC, FIRE and MEDICAL hold-down alarms; keypad backlight; Built-in buzzer; Self indication of communication loss; Environmental class: II. SATEL VERSA-LCD-BL LCD keypad for VERSA panels The keypad is intended for daily operation of the VERSA alarm systems. The LCD display presents text messages, LED indicators for system and partitions status; PANIC, FIRE and MEDICAL hold-down alarms; Keypad and display backlight; Built-in buzzer; Self indication of communication loss. SATEL VERSA-LCDM-WH LCD keypad for VERSA panels The VERSA-LCDM-WH keypad is designed for the VERSA family of control panels. Large, easily readable LCD display; LED indicators for partition and system status indication; Dedicated buttons for quick selection of arming mode (away/stay day/stay night); Keypad hold-down PANIC, FIRE and AUX alarms; Display and keypad backlight; Acoustic indication of system events; Indication of communication loss; Environmental class: II; Supply voltage: 12VDC; Operating temperature range: C; Standby mode current consumption: 50mA; Max. current consumption: 60mA 1.750, , , SATEL INT-TSG-SSW / INT-TSG-BSB / INT-TSG-WSW Touchscreen keypad, also for home automation control Capacitive 4.3 touchscreen reacting even to a slight touch; Graphical user interface with colorful icons; MAKRO features to facilitate home automation control; LEDs informing about the current system status; Possibility of tailoring the status screen to user s needs; 2 zones; Possibility to activate PANIC, FIRE and AUX alarms; Compatibility with VERSA control panels (VERSA Firmware v1.04 or newer, INT-TSG Firmware v1.03 or newer); Environmental class according to EN : II; Supported memory cards: micro SD, micro SDHC ,00

4 13. SATEL INT-TSH-WSW / INT-TSH-SSW Touchscreen keypad, also for home automation control Keypad for INTEGRA, INTEGRA Plus, VERSA and VERSA Plus control panels (INTEGRA Firmware v1.14 or later, VERSA Firmware v1.06 or later); Capacitive 7 touchscreen reacting even to a slight touch; Graphical user interface with color icons; MACRO functions for easy control of the alarm system and home automation components (supported only by the INTEGRA and INTEGRA Plus control panels); Customizable status screen to suit the user's preferences; 2 zones (only supported by the INTEGRA and INTEGRA Plus control panels); PANIC, FIRE, MEDICAL alarms can be triggered from the keypad; Supply voltage: 12 VDC; Operating temperature range: -10 C +55 C; Standby mode current consumption: 450 ma; Max. current consumption: 550 ma; Environmental class according to EN : II; Supported memory cards: microsd, micro SDHC; Available in light (INT-TSH-SSW), dark (INT-TSH-BSB) and white (INT-TSH-WSW) , години 3 години 3 години SATEL Control Panel INTEGRA 24 - HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel Advanced control panel with 4 up to 24 zones Advanced alarm control units providing alarm functions and optional implementation of home automation and access control systems. With a broad range of extension module. Communication features combined with additional modules, such as GSM and TCP/IP, are a major advantage of the INTEGRA control units. 4 up to 24 zone; 4 partitions; 4 up to 20 programmable outputs; Built-in telephone dialer and communicator, voice messaging and remote control features; Access control and home automation features. System operation with LCD keypads, partition keypads, key fobs and proximity cards or remotely with mobile phone or PC; 16 independent timers for automatic control; Event log with 439 entries and event printing feature; users; RS-232 port - RJ type socket. SATEL Control Panel INTEGRA 32 - HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel Advanced control panel with 8 up to 32 zones Advanced alarm control units providing alarm functions and optional implementation of home automation and access control systems. Communication features combined with additional modules, such as GSM and TCP/IP, are a major advantage of the INTEGRA control units. 8 up to 32 zones; 16 partitions, 4 objects; 8 up to 32 programmable outputs; Built-in telephone dialer and communicator, voice messaging and remote control features; Access control and home automation features; system operation with LCD keypads, partition keypads, keyfobs and proximity cards or remotely with mobile phone or PC; 28 independent timers for automatic control; Event log with 439 entries and event printing feature; users; RS-232 port - RJ type socket; Flash firmware upgrade with a PC; Built-in 1.2 A switching mode backup power supply with battery charging and diagnostic features; Option of not reporting server SATEL failure to the control panel (INTEGRA Firmware 1.16 or newer) SATEL Control Panel INTEGRA 64 - HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel Advanced control panel with 16 up to 64 zones Advanced alarm control units providing alarm functions and optional implementation of home automation and access control systems. Communication features combined with additional modules, such as GSM and TCP/IP, are a major advantage of the INTEGRA control units.16 up to 64 zones; 32 partitions, 8 objects; 16 up to 64 programmable 5.800, , ,00

5 17. 3 години години Гаранција outputs; Built-in telephone dialer and communicator, voice messaging and remote control features; Access control and home automation features; proximity cards or remotely with mobile phone or PC; 64 independent timers for automatic control; Event log with 5887 entries and event printing feature; users; RS-232 port - RJ type socket; Flash firmware upgrade with a PC. SATEL Control Panel INTEGRA HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel Advanced control panel with 16 up to 128 zones Advanced alarm control units providing alarm functions and optional implementation of home automation and access control systems. Communication features combined with additional modules, such as GSM and TCP/IP, are a major advantage of the INTEGRA control units. 16 up to 128 zones; 32 partitions, 8 objects; 16 up to 128 programmable outputs; Built-in telephone dialer and communicator, voice messaging and remote control features; Access control and home automation features; proximity cards or remotely with mobile phone or PC; 64 independent timers for automatic control; Event log with 22,527 entries and event printing feature; users; RS- 232 port - RJ type socket; Flash firmware upgrade with a PC. SATEL INTEGRA 256 PLUS - HYBRID Wired and option for Wireless (option1: 433MHz frequency band, option2: 868MHz frequency band) alarm control panel Control panel from 16 to 256 zones and outputs Support for up to 256 zones with a possibility to program parametric resistance and operate 3EOL lines (only mainboard zones); USB port for programming by means of a PC; Possibility to divide the system into 32 partitions and 8 objects; Expandability up to 256 programmable outputs; Communication buses to connect keypads and expansion modules; Integrated phone dialer and communicator with reporting, voice messaging and remote control functions; System operation by means of LCD keypads, partition keyboards, key fobs and proximity cards or remote control via computer or mobile phone; 64 independent automatic control timers; access control and home automation functions; event log for events, with a printout function; support for up to users; Communication buses: 1+2; Programmable wired outputs: 16; Supplying outputs: 3. SATEL INT-SK-GR Partition keypad The partition keypad is designed for easy operation of a single partition in the INTEGRA system, perfectly fit for systems where single partitions constitute functionally separated subsystems. Controls single partition in the system; Keypad hold down PANIC, FIRE and AUX alarms; LEDs for partition state indication; Buzzer for acoustic signaling; Access control features; Relay for electromagnetic lock/electric strike; Door control input. SATEL INT-SF-WSW / INT-SF-SSW Partition keypad The INT-SF partition keypad allows you to control operation of each alarm system based on the control panels of INTEGRA and INTEGRA Plus families. White color backlight; Controls single partition in the system; PANIC, FIRE and AUX alarms triggered from keypad; LEDs for partition status indication; buzzer for acoustic signaling of selected system events; Access control functions; Relay for electromagnetic lock / electric strike control; Door status monitoring input; Supply voltage: 12 VDC; Operating temperature range: -10 C C; Standby mode current consumption: 20 Ma; Max. current consumption: 40 ma; Environmental class according to EN : II; Available in light (INT- SF-SSW), dark (INT-SF-BSB) and white (INT-SF-WSW) SATEL LCD Keypad INT-KLCDS-BL LCD keypad for INTEGRA control panels LCD keypads are used in everyday operation of the INTEGRA systems. Keypad and display backlight; LEDs for system state indication; Keypad hold-down PANIC, FIRE and AUX alarms; Buzzer for acoustic signaling; Two zones expansion; Panel communication loss indication; RS-232 for , , , , ,00

6 supervision and management applications GUARDX. SATEL LCD Keypad INT-KLCD-BL LCD keypad for INTEGRA control panels LCD manipulators are intended for daily operation of the INTEGRA systems. With the display showing text messages, even advanced functionalities of the alarm control unit are simple and convenient. Keypad and display backlight; LEDs for system state indication; Keypad hold-down PANIC, FIRE and AUX alarms; Buzzer for acoustic signaling; Two zones expansion; Panel communication loss indication; RS-232 for supervision and management applications GUARDX. SATEL INT-KLFR-SSW / INT-KLFR-WSW LCD keypad for INTEGRA control panels The INT-KLFR keypad has been designed for users who prefer a traditional interface to operate the alarm system, but also expect attractive appearance solutions. Additionally, the built-in proximity card reader allows you to operate the system without the necessity to remember passwords. Backlit keys and display; LED indicators of system state; PANIC, FIRE and MEDICAL (AUX) alarms triggered with keys; Acoustic signaling of selected system events; 2 programmable zones (with 3EOL configuration support); RS-232 connector for interfacing with the GUARDX program; Built-in proximity card reader for system operation; Supply voltage: 12VDC; Operating temperature range: C; Standby mode current consumption: 60Ma; Max. current consumption: 110mA; Environmental class according to EN : II; Available in light (INT-KLFR-SSW), dark (INT-KLFR-BSB) and white (INT- KLFR-WSW) SATEL INT-KSG-SSW / INT-KSG-WSW Touch keypad The touch keypad INT-KSG does not only stand for attractive design, but also for simplification for the daily operation of advanced alarm systems and home automation using the functionalities of the INTEGRA control units. With the MACRO functions, a whole sequence of actions can be performed through a single command. This way, it can be used e.g. for extended light scenes. Keypad backlight to allow the use in dark rooms; Installer defined 4 menus (16 items each) and quick access functions; PANIC, FIRE and AUX alarms dedicated triggering keys; Audible indication of system events; 2 zones expansion; Indication of loss of communication with panel; Environmental class: II; Max. current consumption: 175mA; Standby mode current consumption: 165mA; Operating temperature range: C; Nominal supply voltage (±15%): 12 V DC; Available in light (INT-KSG-SSW), dark (INT-KSG- BSB) and white (INT-KSG-WSW) 6.940, , , SATEL INT-TSG-SSW / INT-TSG-BSB / INT-TSG-WSW Touchscreen keypad, also for home automation control Capacitive 4.3 touchscreen reacting even to a slight touch; Graphical user interface with colorful icons; MAKRO features to facilitate home automation control; LEDs informing about the current system status; Possibility of tailoring the status screen to user s needs; 2 zones; Possibility to activate PANIC, FIRE and AUX alarms; Compatibility with VERSA control panels (VERSA Firmware v1.04 or newer, INT-TSG Firmware v1.03 or newer); Environmental class according to EN : II; Supported memory cards: micro SD, micro SDHC. SATEL INT-TSH-WSW / INT-TSH-SSW Touchscreen keypad, also for home automation control Keypad for INTEGRA, INTEGRA Plus, VERSA and VERSA Plus control panels (INTEGRA Firmware v1.14 or later, VERSA Firmware v1.06 or later); Capacitive 7 touchscreen reacting even to a slight touch; Graphical user interface with color icons; MACRO functions for easy control of the alarm system and home automation components (supported only by the INTEGRA and INTEGRA Plus control panels); Customizable status screen to suit the user's preferences; 2 zones (only supported by the INTEGRA and INTEGRA Plus control panels); PANIC, FIRE, MEDICAL alarms can be triggered from the keypad; Supply voltage: 12 VDC; Operating temperature range: -10 C +55 C; Standby mode current consumption: 450 ma; Max. current consumption: , ,00

7 Гаранција ma; Environmental class according to EN : II; Supported memory cards: microsd, micro SDHC; Available in light (INT-TSH-SSW), dark (INT-TSH-BSB) and white (INT-TSH-WSW) SATEL INT-TSI-SSW / INT-TSI-WSW / INT-TSI-BSB Touchscreen keypad, also for home automation control Capacitive 7" touchscreen to facilitate system operation; Graphic intuitive operating interface, customizable to individual user's needs; an option to choose the flat design graphics (v1.04 or newer); Capability of viewing images from IP cameras (MJPG via HTTP and in v1.04: MPEG-4, H.264); MASTER/SLAVE operating mode available (v1.04 or newer); Wide range of dedicated widgets for various functions, including weather widget to which forecast is downloaded from the openweathermap.org service (v1.04 or newer) Scalability of the widget size (v1.04 or newer). Capability of saving the user interface configuration directly from TSI Builder program to keypad over Ethernet (v1.04 or newer); Environmental class according to EN : II; Supported memory cards: micro SD, micro SDHC; Supply voltage: 12 VDC; Operating temperature range: -10 C+55 C; Standby mode current consumption: 500 Ma; Capability of viewing images from IP cameras on INT-TSI keypad (v1.04 or newer). SATEL INT-PP 8 zone and 8 output expansion module The module is designed for use with the control panels of INTEGRA and INTEGRA Plus families, as well as with ACCO NT access control panel. This device replaces the CA 64 PP module. The INT PP allows for expansion of the control panel by additional 8 wired zones and 8 programmable relay and OC outputs. The additional tamper input facilitates detection of unauthorized opening of the enclosure in which the module is installed. Support for: NO, NC, EOL, 2EOL/NO, 2EOL/NC (alarm control panels only), 3EOL (INTEGRA Plus only); support for roller shutter and vibration detectors (alarm control panels only); system expansion with 8 zones; system expansion with 8 outputs: 4 OC type outputs, 4 relay outputs, ability to connect to RS 485 bus (firmware update via the bus). SATEL INT-ADR Addressable zone expansion module up to 48 addressable zones The module is designed for connecting addressable detectors to the control panels of INTEGRA and INTEGRA Plus families. The addressable detector bus is independent of the control panel expander bus, which makes possible the hybrid implementation of systems, combining addressable and directly connected components. Support for addressable detectors based on CA-64 ADR-MOD module; Capability of system expansion with up to 48 addressable zones. SATEL CA-64 ADR-MOD Addressing module An addressing module for converting traditional detectors for an alarm system equipped with a relay output into detectors connected to an addressable control panel. Converts standard (NO, NC), Compatible with INT-ADR, CA-64 ADR addressable bus module. SATEL INT-KNX-2 KNX system integration module The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels. The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure , , ,00 920, ,00

8 Electronics designed to meet the requirements of standards for KNX system devices SATEL Reader INT-SCR-BL Multi-function keypad with proximity card reader The partition keypad is designed for easy operation of a single partition in the INTEGRA system, perfectly fit for systems where single partitions constitute functionally separated subsystems. With the built-in proximity card reader, partitions can be handled without a password, and the airtight housing allows for outdoor installation. Partition keypad and entry keypad modes; Proximity card reader; LEDs for partition state indication; Buzzer for acoustic signaling keypad backlight; Optical tamper for opening and removal from mounting surface; Relay for electromagnetic lock/electric strike door sense input; Doorbell button; Outdoor operation. ZONES/OUTPUTS EXPANSION MODULES FOR VERSA AND INTEGRA SATEL INT-E Zone expansion module 8 zones The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA and VERSA Plus families as well as with ACCO-NT access control panel. The INT-E offers expansion of the system by 8 wired zones as allows direct connection of roller shutter and vibration detectors. System expansion with 8 zones Support - NO, NC / -EOL, 2EOL/NO, 2EOL/NC (alarm control panels only) - 3EOL (INTEGRA Plus only) SATEL INT-O Output expansion module 8 outputs The output expansion module, designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus, VERSA and VERSA Plus families, as well as with ACCO NT access control panel. This device replaces the CA 64 O OC, CA 64 O R and CA 64 O ROC modules. The INT O allows for expansion of the system by additional 8 wired outputs. An additional tamper input helps detect unauthorized opening of the enclosure in which the module is installed. System expansion with 8 outputs: 8 low current outputs, OC type; up to 8 relay outputs; each OC type output is connected in parallel to; relay output; capability to reduce power consumption by disabling; support for selected relay outputs; ability to connect to RS 485 bus (firmware update via the bus). SATEL INT-ORS DIN rail compatible outputs expansion module The INT-ORS module allows for expansion of the INTEGRA/VERSA systems by 8 programmable relay outputs. It is designed for implementation of direct operation of 230 V devices using control panels of the INTEGRA, INTEGRA Plus and VERSA families. This module is also a great option where the capabilities offered by these panels are to be used to create an automation system. The INT-ORS is designed for mounting on a standard 35 mm DIN rail. 8 relay outputs for direct control of 230 V mains powered appliances; Installation directly on 35 mm DIN rail; Optical indicators of relay state. SATEL INT-IORS DIN rail compatible zones and outputs expansion module The INT-IORS module allows expansion of the INTEGRA system by 8 programmable relay outputs and 8 zones with support for NO, NC, EOL and 2EOL configuration. This module is designed for implementation of direct operation of 230 V devices using the INTEGRA control panel. It is an ideal option where the capabilities offered by the INTEGRA control panels are to be used to create an automation system; 8 relay outputs for direct control of 230 V mains powered appliances; 8 programmable zones; Installation directly on 35 mm DIN rail; Optical indicators of relay state , , , , ,00

9 години SATEL MICRA 433MHz HYBRID Wireless and wired Control Panel with GSM/GPRS communicator and with plastic box OPU-4P The MICRA module is provided with a GSM / GPRS communicator, with which it can not only implement SMS notification of events via SMS, but also transmit information to alarm monitoring companies. Operating frequency range: 433,05 434,79 MHz; 4 programmable inputs for detectors and technical equipment supervision; to 8 key fobs (P-2, P-4, T-1, T-2, T-4, MPT-300); Number of wireless detectors: 8; Types of supported wireless detectors: MSD-300, MPD-300, MMD-300; Number of wired inputs (standard/analog): 5 (4+1); Number of outputs (relay/oc): 2/1; Number of supported wireless keypads: 1; Number of phones to be notified:4; Output voltage range: 10,5 13,8 DC V. SATEL MKP MHz Wireless keypad only for MICRA system Wireless keypad for MICRA system which allows arming / disarming and controlling devices connected to the module, without the need to have an own remote control key fob. Operating frequency band: 433,05 434,79 MHz; Environmental class: II; Battery working time: estimated 3 years; Radio communication range (in open area): to 200 m , , години SATEL PERFECTA 16 Control panel The PERFECTA family control panels are designed to protect small and medium-sized premises, such as apartments, detached houses, segments of terraced houses, offices, small businesses, etc. They provide protection to the requirements of EN Grade 2. The system based on the PERFECTA 16 control panel is characterized by quick installation, simple configuration as well as easy and intuitive operation. In addition to the basic, traditional control, the control panel also offers more advanced methods, for example, by using the functional and intuitive PERFECTA CONTROL application for mobile devices. The built-in GSM/GPRS module provides a wide range of features: interaction with mobile application with support for PUSH messages, remote configuration using the PERFECTA Softprogram, reporting events (e.g. to the monitoring station security agency), voice messaging, control via SMS and audio verification (listening in to the sounds from the protected premises). Two nano-sim cards are supported to ensure continuity of communication: if any problems occur with the first operator range, the second card is automatically selected. The control panel electronics board is provided with wired 8 zones and 4 outputs. Their number can be increased by connecting the extension modules: INT-E zone expander and INT-O or INT-ORSoutput expanders. This allows you to expand the system by adding more detectors, sirens, and even actuators (to control the garage door, roller shutters, garden sprinklers). The control panel enables the object (premises) to be divided into two partitions, with three armed modes to select from (day, night, full). Each zone can be assigned to one or both of the supervised areas. The system can be configured in two ways: using the intuitive PERFECTA Soft program (from a computer connected with RS- 232 (TTL) cable or remotely) and from a keypad, using shortcuts in the service menu. From 8 to 16 programmable wired zones: selectable configuration: NO, NC, EOL, 2EOL/NO, 2EOL/NC; Support for roller shutter detectors / vibration detectors; From 4 to 12 programmable wired outputs; 2 power outputs on mainboard; Built-in modules: GSM/GPRS with 2 SIM slots (SMS, reporting to monitoring station, mobile application, PUSH notifications); voice (playback of voice messages for telephone messaging purposes); audio alarm verification (listening in); System division into 2 partitions: 3 detection modes in each partition, НОВО!!! 7.100,00

10 години 3 години optional assignment of each zone to two partitions; user control or timer control option; Communication bus for connecting keypads (PRF-LCD) and expansion modules (INT-E, INT-O, INT-ORS); System control by using: PRF-LCD keypads (up to 4), PERFECTA CONTROL mobile application; Firmware updates available; Passwords: 15 user codes, 1 service code; Editable names (of users, partitions, zones, outputs and modules) for easy control and supervision of the system; Timers: 8 timers with exceptions setting capability; Memory of 3584 events; Automatic diagnostics of main components of the system; Built-in switching power supply: overload protection, battery deep discharge protection, battery charging current control; Programming control panel settings: locally keypad, computer with PERFECTA Soft program installed, connected to the control panel RS 232 (TTL) port, remotely computer with PERFECTA Soft program installed, connecting to the control panel via GPRS SATEL Control Panel PERFECTA 16-WRL HYBRID Control Panel - Wired and Wireless 433MHz + antenna for GSM/GPRS ANT-GSM-I The control panel allows you to create a wireless system and a hybrid system (combination with the traditional wired system). From 8 to 16 programmable wired zones: selectable configuration: NO, NC, EOL, 2EOL/NO, 2EOL/NC; Support for roller shutter detectors / vibration detectors; From 4 to 12 programmable wired outputs; 2 power outputs on mainboard; Compliance with EN Grade 2; Additional 4 wireless outputs for operating MSP-300 wireless sirens Built-in modules: GSM/GPRS with 2 SIM slots (SMS, reporting to monitoring station, mobile application, PUSH notifications); Voice (playback of voice messages for telephone messaging purposes); Audio alarm verification (listening in); Integrated radio module operating at 433 MHz and providing encrypted wireless communication: two-way with PRF-LCD-WRL keypads and MSP-300 R sirens, one-way with MICRA family detectors and MPT-350 keyfobs; System division into 2 partitions: 3 detection modes in each partition; optional assignment of each zone to two partitions; user control or timer control option; Communication bus for connecting keypads (PRF-LCD) and expansion modules (INT-E, INT-O, INT-ORS); System control by using: keypads (up to 4): wired PRF-LCD or wireless PRF-LCD-WRL; PERFECTA CONTROL mobile application; MPT-350 remote control keyfobs (up to 15); Passwords: 15 user codes, 1 service code; Editable names (of users, partitions, zones, outputs and modules) for easy control and supervision of the system; 8 timers with exceptions setting capability; Memory of 3584 events; Automatic diagnostics of main components of the system; Built-in switching power supply: overload protection, battery deep discharge protection, battery charging current control; Programming control panel settings: locally keypad, computer with PERFECTA Soft program installed, connected to the control panel RS 232 (TTL) port, remotely computer with PERFECTA Soft program installed, connecting to the control panel via GPRS SATEL Control Panel PERFECTA 32-WRL HYBRID Control Panel - Wired and Wireless 433MHz + antenna for GSM/GPRS ANT-GSM-I The control panel allows you to create a wireless system and a hybrid system (combination with the traditional wired system). From 8 to 32 programmable wired zones: selectable configuration: NO, NC, EOL, 2EOL/NO, 2EOL/NC; Support for roller shutter detectors / vibration detectors; From 4 to 12 programmable wired outputs; 2 power outputs on mainboard; Compliance with EN Grade 2; Additional 4 wireless outputs for operating MSP-300 wireless sirens Built-in modules: GSM/GPRS with 2 SIM slots (SMS, reporting to monitoring station, mobile application, PUSH notifications); Voice (playback of voice messages for telephone messaging purposes); Audio alarm verification (listening in); Integrated radio module operating at 433 MHz and providing encrypted wireless communication: two-way with PRF-LCD-WRL keypads and MSP-300 R sirens, one-way with MICRA family detectors and MPT-350 keyfobs; System division into 2 partitions: 3 detection modes in each partition; optional assignment of , ,00

11 each zone to two partitions; user control or timer control option; Communication bus for connecting keypads (PRF-LCD) and expansion modules (INT-E, INT-O, INT-ORS); System control by using: keypads (up to 4): wired PRF-LCD or wireless PRF-LCD-WRL; PERFECTA CONTROL mobile application; MPT-350 remote control keyfobs (up to 15); Passwords: 15 user codes, 1 service code; Editable names (of users, partitions, zones, outputs and modules) for easy control and supervision of the system; 8 timers with exceptions setting capability; Memory of 3584 events; Automatic diagnostics of main components of the system; Built-in switching power supply: overload protection, battery deep discharge protection, battery charging current control; Programming control panel settings: locally keypad, computer with PERFECTA Soft program installed, connected to the control panel RS 232 (TTL) port, remotely computer with PERFECTA Soft program installed, connecting to the control panel via GPRS SATEL LCD keypad PRF-LCD LCD keypad for PERFECTA control panels The PRF-LCD keypad is designed for daily operation of the PERFECTA control panels. The device meets the EN security requirements for Grade 2. Big keys, LCD display and LEDs indicating the system status make operation of the system easy and clear for all users. In addition to the number keys, the keypad has also buttons for quick activation of the selected armed mode (day, night, full) and triggering of three alarms: Panic, Fire, Aux. With its aesthetically pleasing appearance, PRF-LCD perfectly fits the decor of interiors protected by the system. LEDs indicating the status of partitions and system; Quick activation of selected armed mode with function keys; PANIC, FIRE, AUX alarms triggered from the keypad; Backlit display and keys audible signaling for selected system events; Indication of loss of communication with control panel SATEL LCD keypad PRF-LCD-WRL LCD keypad for PERFECTA control panels PRF-LCD-WRL is a wireless keypad designed for daily operation of the PERFECTA 16-WRL and PERFECTA 32-WRL control panels. Two-way encrypted communication with the control panel takes place at 433 MHz. The device meets the EN security requirements for Grade 2. Big keys, LCD display and LEDs indicating the system status make operation of the system easy and clear for all users. In addition to the number keys, the keypad has also buttons for quick activation of the selected armed mode (day, night, full) and triggering of three alarms: Panic, Fire, Aux. With its aesthetically pleasing appearance, PRF-LCD- WRL perfectly fits the decor of interiors protected by the system. Large and clear LCD display; LEDs indicating the status of partitions and system; Quick activation of selected armed mode with function keys PANIC, FIRE, AUX alarms triggered from the keypad; Backlit display and keys; Audible signaling for selected system events; Power source: two 3 V CR123A lithium batteries SATEL MPT-350 Remote control keyfob for PERFECTA system MPT-350 is a keyfob designed for control of the systems based on PERFECTA 16-WRL and PERFECTA 32-WRL control panels. It works one-way at 433 MHz and is characterized by a transmission range of up to 400 m (in open area). It has 5 buttons to which up to 6 control functions can be assigned. Thus, in addition to arming and disarming the system, the keyfob provides other functions as well. For example, it can control equipment connected to the system (garage door, roller shutters, etc.), call for help (panic alarm) and so on. The control buttons are located in a special recess to prevent them from being pushed accidentally. SATEL 433MHZ WIRELESS SECURITY SYSTEM SATEL VERSA-MCU 433MHz Wireless system controller The VERSA-MCU module enables expansion of the VERSA control panels with wireless 433 MHz detectors. Up to 30 detectors may be added to a VERSA panel using this module. Programming the controller settings via a service menu of a DLOADX software , , , ,00

12 SATEL MTX MHz Wireless system controller The MTX 300 controller enables expansion of the alarm systems by adding wireless devices, it can work in conjunction with SATEL control panels, including: INTEGRA, INTEGRA Plus, VERSA and VERSA Plus, as well as MICRA module. It can also be used in any third party alarm system or automation system, e.g. as a radio controller, to open / close entry gate or garage door by using keyfobs. Supports up to 16 detectors, up to 32 keyfobs and up to 4 MSP 300 wireless sirens. Two-way encrypted communication with wireless sirens. The controller can be programmed locally using buttons located on it or by means of computer with the MTX SOFT dedicated free Program installed; 8 programmable relay outputs; 2 programmable siren control inputs; off line operation option; tamper switch activated by opening of enclosure. SATEL MPT MHz Remote control key fob Multifunction remote control key fob. It allows not only to easily arm and disarm the system, but also to call for help (start the panic alarm), or control other devices, for instance, the entrance gate. Environmental class according to EN : II; Operating frequency band: 433,05 434,79 MHz; Radio communication range (in open area): to 100 m. SATEL MPD MHz Wireless motion detector with bracket Digital detection algorithm with temperature compensation for high immunity to false alarms and repeatability of parameters; Ability to change sensitivity. Optional operating mode with up to 15kg pet immunity, Detection of tamper. Environmental class: II; Recommended mounting height: 2,4 m; Operating frequency band: 433,05 434,79 MHz; Radio communication range (in open area): to 200 m; Battery: CR123A 3V; Battery life expectancy (energy save mode): estimated 3 years. SATEL MMD MHz Wireless door/window opening detector Two optional reed switch sensors to facilitate selection of installation place; Input for connecting an external sensor to protect two points (e.g. two sashes of one window) with a single device; Energy management system to enable many years of operation without having to replace the CR123A lithium battery; Detection of tamper, e.g. opening enclosure, ripping away from mounting surface; Additional input sensitivity: 312 ms; Environmental class: II; Operating frequency band: 433,05 434,79MHz; Radio communication range (in open area): to 200 m; Standby mode current consumption: 80 µa; Max. current consumption: 27 Ma; Operating temperature range: -10 C +55 C. SATEL MGD MHz Wireless glass break detector Detection of plate, tempered and laminated glass breaking; Step less sensitivity adjustment; Tamper detection; Environmental class according to EN : II; Radio communication range (in open area): to 200 m; Probe wire length: 3 m; Operating frequency band: 433,05 434,79 MHz; Battery: CR123A 3V; Battery working time: Estimated 3 years , , , , , SATEL MFD MH3 Wireless flood detector Detection of water flood in the areas with water installation; Tamper protection; Environmental class according to EN : II; Radio communication range (in open area): to 200 m; Operating frequency band: 433,05 434,79 MHz ; Battery: CR123A 3V; Battery working time: Estimated 3 years ,00

13 SATEL MSD MHz Wireless smoke and heat detector with base Photoelectric system for detection of visible smoke accompanying the fire development, meeting the requirements of EN54-7; Temperature rise detection system, meeting the requirements of Class A1R, according to EN54-5; Built-in siren, manual test; Energy management system to enable many years of operation without having to replace the CR123A lithium battery; Detection of tamper; Operating frequency band: 433,05 434,79 MHz; Radio communication range (in open area): to 200 m; Minimum static response temperature: 54 C; Maximum static response temperature: 65 C. SATEL MSP-300 R 433MHz Wireless outdoor acoustic and optical siren The MSP 300 wireless outdoor siren is designed to work in conjunction with the MTX 300 controller, operating at 433 MHz frequency. The modern SPIRIT1 radio system with optimized power management, which enables long lasting operation of the device in harsh environments, has been used in the siren. Trouble free functioning of the MSP 300 is also possible due to the BAT ER 3,6 high performance battery, which is used. Sound pressure level at 1m: up to 105 db; independent wireless triggering of optical and acoustic signals; optical signaling: ultra bright LEDs; acoustic signaling: piezoelectric transducer; several acoustic signals to choose from; advanced radio system for optimized low; power communication; remote configuration , , SATEL TWO WAY 868MHZ WIRELESS SECURITY SYSTEM ABAX SATEL ACU MHz Miniature ABAX bidirectional wireless system controller The ACU-270 controller can be used with the control panels of INTEGRA and VERSA families, allowing expansion of the system by adding wireless devices (connection through the communication bus). It provides two-way communication with confirmation of all transmissions. The advantage of the ACU-270 controller is its excellent range - up to 500 m in open area, obtained through the use of an advanced radio system. Support for up to 48 wireless devices of the ABAX system: detectors: AFD-100, AGD-100, AMD-100, AMD-101, AMD-102, AMD-103, APD-100, APMD-150, ARD-100, ASD-110, ATD-100, AVD-100, sirens: ASP-105, ASP-205, other: ACX-200, ACX-201, ARF-100, ARU-100, ASW-100 E / ASW-100 F; Support for up to 8 wireless keypads within the ABAX system (depending on the control panel); Support for up to 248 APT-100 key fobs (depending on the control panel); Two-way encrypted radio communication in the 868 MHz frequency band; Programming the controller via the control panel by using: keypad in the service mode, DLOADX program; Tamper switch responding to the enclosure opening/separation from mounting surface. SATEL VERSA-LCDM-WRL 868MHz Wireless LCD keypad for VERSA control panels The VERSA-LCDM-WRL wireless keypad enables operating and programming the VERSA control panels by means of the ACU-120 / ACU-270 controllers. It is designed to work as part of the ABAX two-way wireless system. Full functionality offered by wired LCD keypads; Two-way encrypted radio communication in the 868 MHz frequency band; Operating range: up to 500 m (with ACU- 120 / ACU-270) in open area; Built-in proximity card reader; Built-in piezoelectric transducer for sound signaling; Two operating modes: active/inactive; Wake-up option; Configuration by using: DLOADX program, keypad in service mode; Tamper switch responding to the enclosure opening/detachment from the wall; Enclosure designed for quick and easy installation; Power supply: two CR123A 3 V batteries , ,00

14 SATEL APT MHz Bidirectional remote control key fob Encrypted bidirectional transmission with ABAX compatible controller; Free assignment of action to 6 key fobs buttons; Programmable assignment of 3 confirmation LEDs; Acoustic feedback with built-in buzzer; Automatic keypad backlight; Radio communication range (in open area): to 500 m. SATEL APD MHz Wireless PIR detector with bracket EN50131 Grade 2 compliance; Three step remote sensitivity adjustment; Battery diagnostics; Remote configuration; Tamper protection against opening and removing from mounting surface; Up to 15kg pet immunity configuration option; Radio communication range (in open area): to 500 m; Battery: CR123A 3V; Operating temperature range: - 10 C+55 C; Range: 12x12m 90. SATEL APMD MHz Wireless dual technology PIR+MW detector with bracket The APMD-150 wireless detector operates as part of the ABAX two-way wireless system. This device has a dual mechanism of detection: PIR sensor and microwave sensor. The dual-technology design, digital motion detection algorithm and temperature compensation provide high immunity to false alarms and interference, even in areas where adverse or quickly varying conditions prevail, e.g. in the vicinity of fireplaces, in locations where drafts frequently occur, etc. independent PIR and microwave remote sensitivity adjustment; Independent remote adjustment of both sensors is possible by using the DLOADX program. Range: 6x15m 80 ; Environmental class: II; Detected target velocity: 0,3 3 m/s; Operating temperature range: -10 C+55 C; Recommended mounting height: 2,4 m; Operating frequency range: 868,0 868,6 MHz; Radio communication range (in open area): up to 500m; Battery: CR123A 3V SATEL AOD MHz Wireless dual technology outdoor motion detector Two detection circuits: PIR + MW ; Microwave frequency: 24,125 GHz; Built-in dusk sensor to enable the detector to be used in automation systems ; Remote sensitivity configuration for detection circuits and dusk sensor from DLOADX level splash-proof polycarbonate enclosure, IP54 rated; Can operate in adverse weather conditions (rain, snow, fog, strong wind); Tamper protection against opening and tearoff; Digital temperature compensation for correct detector operation in - 35 C to +55 C temperature range; High immunity to false alarms owing to the auto-adaptation algorithm used; Look-down zone protection; Pet immunity option (up to 20 kg); Low power consumption; Radio communication range (in open area): to 500 m; Battery: CR123A 3V; Operating temperature range: -10 C+55 C; Range: 6x14m 90 ; IP code: IP54 ; Operating frequency band: 868,0 868,6 MHz ; Without bracket SATEL AOCD MHz Outdoor dual-tech curtain detectors AOCD-250 is an outdoor curtain motion detector which belongs to the group of perimeter protection devices. This is a curtain detector designed to work as part of the ABAX two-way wireless system. It is supported by the ACU-120 and ACU-270 controllers, ARU-100 radio signal repeater and INTEGRA 128-WRL control panel. Owing to its efficient energy management, the detector can work up to 3 years without having to replace the battery. The AOCD-250 detector has two motion detection circuits PIR and MW, and uses active IR anti-masking (for indoor use). Thus, it meets the high security requirements specified in EN for Grade 3: the detector can be used to protect the interiors of high medium to premises, like banks, museums, jewelry stores, etc. The detectors have a detection angle of 10 and an operating range of 14 m; Two detection circuits: PIR and microwave; Active IR antimasking for indoor applications; Splash-proof polycarbonate enclosure, IP54 rated; Tamper protection against opening and removal from mounting surface configuration of detection circuit sensitivity with onboard potentiometers low current consumption 2.810, , , , ,00

15 SATEL AMD MHz Compact wireless magnetic detector for ABAX systems Compact magnetic door and window opening detector is designed for ABAX wireless installations. CR2477N supply battery; Built-in tamper detection; Supported by the controller ACU-100 / ACU-250 (software version 4.02 or newer) and by the control panel INTEGRA 128-WRL Radio communication range (in open area): to 350 m. SATEL AGD MHz Wireless glassbreak detector The AGD-100 wireless glass break detector, used as part of the ABAX two-way wireless system, is intended for protecting premises with a large amount of glazing. It is designed to detect breaking of regular, tempered and laminated glass. The detector analyzes the acoustic signal in two ways first, for the sound of glass pane impact, and then for the sound of breaking glass. The alarm is only reported after the two signals actually occur. This eliminates signaling of such harmless events as, for example, wind knocking tree branches against the window. The detector is provided with detection sensitivity adjustment, tamper switch and battery status indication. The device is compatible with INTEGRA 128- WRL control panel, ACU-120, ACU-270 and the older ACU-100, ACU-250 controllers, as well as with ARU-100 radio signal repeater. SATEL AVD MHz Wireless vibration detector and magnetic contact The AVD-100 wireless vibration detector with magnetic contact is designed to work in the ABAX two-way wireless system. Advanced processing of piezoceramic sensor signal; Adjustable sensitivity and settings of vibration sensor; Independent integrated magnetic contact; Tamper protection; Radio communication range (in open area): to 500 m; Battery: CR123A 3V; Operating temperature range: -10 C+55 C; Operating frequency band: 868,0 868,6 MHz SATEL ATD MHz Wireless temperature detector Built-in digital temperature sensor; Two programmable temperature thresholds; remote configuration; Standby mode current consumption: 50 µa; Max. current consumption: 16 ma; Battery: CR123A 3V; Operating temperature range: -10 C+55 C; Radio communication range (in open area): to 500 m; Temperature measurement accuracy: ±2% , , , , SATEL ARD MHz Wireless reorientation detector Individual protection on precious items; Detection of item s reorientation in 3D space; Remote configuration; Tamper protection; Operating temperature range: -10 C+55 C; Radio communication range (in open area): to 500 m ; Battery: CR123A 3V SATEL AFD MHz Wireless flood detector Detection of water presence for flood threated areas; Tamper protection against opening and removing from mounting surface; Environmental class: II; Radio communication range (in open area): to 500 m; Battery: CR123A 3V; Battery working time: estimated 3 years; Operating temperature range: -10 C+55 C. SATEL ASD MHz Wireless smoke and heat detector with base The ASD-110 multi sensor detector enables detection of the early stages of fire development when visible smoke appears and/or temperature rise occurs. It can work as a stand-alone device or as part of the ABAX two-way wireless system. LED indicator for test mode signaling; Tamper contact reacting; Remotely activated test mode; Selfdiagnostic functions. Class according to EN 54-5 (heat sensor): A1R; Min. static response temperature: 54 C, Max. static response tem.: 65 C; Radio communication range (in open area): to 500 m , , ,00

16 SATEL ASD-150 Smoke detector ASD-150 can detect fire at its early stages of development, as soon as the visible smoke appears. This model can work either as part of the two-way wireless ABAX system or as a stand-alone device, which is confirmed by the certificate of compliance with EN for stand-alone detectors, issued by the Scientific and Research Centre for Fire Protection. Optical detector of visible smoke in accordance with EN 14604; Optical (LED) and acoustic (piezoelectric transducer) signaling of detected smoke; Auto-diagnostic functions (checking the status of battery and optical chamber); Chamber soiling indication; Tamper protection against opening and removal from mounting surface; Power source: 3 V CR123A lithium battery; Testing function SATEL ASP-205 R 868MHz Wireless indoor siren Wireless triggering of optical and acoustical signaling; Acoustic signaling Piezo transducer; Optical signaling: Ultra bright LEDs; The intensity of sound: up to 120 db ; Two separately triggered signaling modes (selection of acoustic signal and optical signaling); Operating frequency range: 868,0 868,6 MHz ; Remote configuration; Tamper protection; Radio communication range (in open area): to 500 m. SATEL ASP-105 R 868MHz Wirelessly triggered outdoor siren Wireless triggering of optical and acoustical signaling; Optical signaling: Ultra bright LEDs; The intensity of sound: up to 120 db ; Selection of four acoustic signals; Operating frequency band: 868,0 868,6 MHz ; Remote configuration; Long-lasting rechargeable battery powered by external power supply; Tamper protection; Radio communication range (in open area): to 500 m. SATEL ASP-100 R Wireless outdoor acoustic and optical siren The ASP-100 wireless outdoor siren is designed for operation as part of the ABAX two-way wireless system. It is compatible with the ACU-120 and ACU-270 controllers. Independent wireless triggering of optical and acoustic signals; Optical signaling: ultra bright LEDs; Acoustic signaling: piezoelectric transducer; Sound pressure level at 1m: up to 105dB; Powered from battery ER ,6V/13Ah, wide temperature range, high-performance battery; Operating temperature from -40 C to +55 C; Tamper protection against enclosure opening / tear-off; Operating frequency band: 868,0 868,6MHz; Standby mode current consumption: 2 ma; Radio communication range (in open area): up to 500 m; Radio communication range (in open area): up to 500 m; Environmental class according to EN : IIIA SATEL ARF MHz Site survey tool for ABAX system Diagnostic site survey tool to facilitate wireless communication conditions testing; Bidirectional communication: indication of both received signal level, and signal level transmitted by ARF-100 as seen by the controller unit; Battery9V 6LR61; Radio communication range (in open area): to 500 m. SATEL ASW-100 F Mains powered domestic appliances wireless controller ASW-100 F is a wireless controller for devices powered from 230 V AC mains. It is designed to work in the ABAX two-way wireless system and is supported by the INTEGRA 128-WRL control panel, ACU-120, ACU-270 and the older ACU-100 and ACU-250 controllers, as well as with ARU- 100 radio signal repeater. The controller is connected directly to the 230 VAC wall outlet. It allows you to remotely and manually switch on / off any device with power consumption up to 16A (resistive load) connected to the built-in type SCHUKO, so it can find almost infinite number of applications. For ease of use, it comes with a LED indicating the operating status (on/off). Operating frequency range: 868,0 868,6MHz; Radio communication range (in open area): up to 500 m 4.520, , , , , ,00

17 SATEL ACX-200 Zones and outputs expansion wireless module The ACX-200 wireless zones and outputs expander is an expansion module that enables wired devices to be included into the ABAX two-way wireless system. It is provided with 4 zones for connecting wired detectors in NO, NC, EOL, 2EOL/NO and 2EOL/NC configurations. The module has 4 relay outputs to operate e. g. sirens, and a tamper switch. The maximum range of wireless communication is 500 m in open area. The device is compatible with INTEGRA 128-WRL control panel, ACU-120, ACU-270 and the older ACU-100 and ACU-250 controllers, as well as with ARU-100 radio signal repeater. The ACX-200 expander complies with EN requirements for Grade 2. Supply voltage: 12VDC; Operating temperature range: C; Operating frequency range: 868,0 868,6 MHz; Standby mode current consumption: 130Ma; Max. current consumption: 140mA; Radio communication range (in open area): up to 500 m SATEL ACX-201 Zones and outputs expansion wireless module The ACX-201 wireless zones and outputs expander is an expansion module that enables wired devices to be included into the ABAX two-way wireless system. It is provided with 4 zones for connecting wired detectors, 4 relay outputs to operate e. g. sirens, and an NC type tamper switch. Additionally, the module has a built-in high-efficiency 1.2A switching power supply with overload protection and battery status monitoring circuit. The maximum range of wireless communication is 500 m in open area. The ACX-201 expander is compatible with INTEGRA 128-WRL control panel, ACU-120, ACU-270 and the older ACU-100 and ACU-250 controllers, as well as with ARU-100 radio signal repeater. Operating temperature range: C; Operating frequency range: 868,0 868,6 MHz; Standby mode current consumption: 130Ma; Max. current consumption: 140mA; Radio communication range (in open area): up to 500 m SATEL ARU MHz ABAX devices signals retransmitter The ARU-100 allows effectively increasing the range of the ABAX system by retransmitting signals from devices located outside the controller's range. Retransmission of signals from up to 46 devices; Sabotage detection; 230 VAC power supply option; Built in emergency power supply battery; Radio communication range (in open area): up to 500 m; Lithium-ion battery: 3,7V/1,8 Ah: Environmental class according to EN : II; Maximum humidity: 93±3%; Max. current consumption: 55mA; Supply voltage (±15%): 230 V AC, Hz; Operating frequency band: 868,0 868,6 MHz; Standby mode current consumption: 7 ma 4.280, , , WIRED DETECTORS SATEL TOPAZ Compact digital motion detector New generation digital detection algorithm ;Ambient temperature compensation; Built-in EOL resistors to facilitate installation; Environmental class according to EN : II; Alarm signaling time: 2 s; EOL resistors: 2 x 1,1 K Ω; Warm-up period: 120 s; Relay contacts rated load (resistive): 40 ma / 16 VDC; Supply voltage: 12V/DC; Range: 15x20m 90 ; Recommended mounting height: 2,4 m; Maximum current consumption: 8,5 ma; Operating temperature range: -10 C+55 C ; Max. humidity: 93±3%; Without bracket BRACKET A Adjustable holder for motion detectors An adjustable motion detector holder for wall and ceiling mounting. Tilt angle adjustment within approx. 30 ; Swivel angle adjustment within approx ,00 145,00

18 SATEL AQUA PLUS with bracket Digital PIR motion detector Fully digital algorithm; Digital temperature compensation; Prealarm feature; Adjustable mounting bracket included; Supply voltage: 12 V DC; Range: 15x14m 130 ; Alarm signaling time: 2 s; Recommended mounting height: 2,4 m; Standby mode current consumption: 10 ma; Max. current consumption: 12 ma; Relay contacts rated load (resistive): 40mA / 16VDC; Operating temperature range: - 30 C+55 C. SATEL AQUA Pet Digital PIR motion detector AQUA Pet is a digital passive infrared detector equipped with a dual element PIR sensor. Owing to the use of a digital algorithm of motion detection and the temperature compensation function, the device is characterized by reliable operation in a wide range of ambient temperatures as well as high sensitivity and immunity to interference. The detector is provided with a tamper switch. Additionally, it has builtin EOL resistors for easy installation and connection to the alarm system. The main task of the detector is to detect violations in the protected area. However, it can also be used to implement the building automation functions. When the alarm system is not armed, the detector can control turning on the lights, opening or closing the doors, etc. Home pet immunity up to 15 kg; Supply voltage: 12 V DC; Relay contacts rated load (resistive): 40mA/16VDC; Environmental class according to EN : II; Range: 18 x 10m 90 SATEL GRAPHITE Advanced digital motion detector with bracket High quality dual element pyro sensor; New generation DSP and analysis algorithm; Precise LODIFF Frensel sealed optics; Digital temperature compensation; Remotely triggered test mode; Alarm latch feature; Adjustable mounting bracket included; Build-in EOL resistors; Supply voltage: 12 V DC; Relay contacts rated load (resistive): 40mA / 16VDC; Warm-up period: 30s; Alarm signaling time: 2s; Range: 18x18m 90 ; Operating temperature range: -30 C+55 C; Maximum humidity: 93±3%. SATEL IVORY with bracket Advanced PIR motion detector with mirror optics with bracket High quality segmented mirror; Advanced digital signal processing; Temperature compensation; Stepless sensitivity adjustment; Remote walk test triggering; Alarm memory feature; Build-in EOL resistors; Recommended mounting height: 2,1-3 m; Detected target velocity: 0,3 3 m/s; Nominal supply voltage (±15%): 12 V DC; Standby mode current consumption: 12 ma; Max. current consumption: 12 ma; Range: 18x18m 90 SATEL NAVY Dual technology PIR and glass break detector with bracket NAVY dual technology detector combines the motion detection using PIR technology with acoustic glass break detector. Independent sensitivity adjustment of PIR and glass break detection; Environmental class according to EN : II; Alarm signaling time: 2 s; Range: 12x13m 90 ; Warm-up period: 30 s; Glass break detection range: to 6 m; Recommended mounting height: 2,4 m; Standby mode current consumption: 7,5 ma; Max. current consumption: 10 ma; Relay contacts rated load (resistive): 40 ma / 16 V DC. SATEL GREY Compact dual technology PIR+MW detector with bracket Dual technology motion detector that combines PIR technology with Microwave detection is suitable for protection of rooms with suboptimal environmental conditions where drafts or intensive convection may occur. The use of new microwave sensor operating and 24GHz frequency, together with 0402 SMD technology allowed to design a dual technology. This makes GREY a great choice for protection of rooms with a fireplace or hot-air heating systems. Dual detection technology PIR + Microwave that ensures reliability even in harsh conditions; Remote test mode and alarm memory features; PET immunity option; Supply voltage: 12 V DC; Range: 13x11m 104 ; 880, , , , , ,00

19 Гаранција OPAL PRO Relay contacts rated load (resistive): 40 ma / 16 V DC. SATEL SILVER with bracket Advanced dual technology digital motion detector PIR+MW New generation DSP and analysis algorithm; Cloaking attempts detection; Precise LODIFF Fresnel sealed optics; Digital temperature compensation; Microwave based Antimask feature; Remotely triggered test mode; Build-in EOL resistors; Operating temperature range: C; Recommended mounting height: 2,4 m; Standby mode current consumption: 18mA; Range: 18x18m 90 ; Max. current consumption: 25 ma; Relay contacts rated load (resistive): 40 ma / 16VDC; Environmental class according to EN : II; Alarm signaling time: 2s; Complied with standards: EN , EN , EN , EN v; Microwave frequency: 10,525 GHz ; Supply voltage: 12 VDC. SATEL OPAL / OPAL GY (white / grey) Outdoor PIR + MW dual technology motion detector Anti masking function based on the Microwave technology. The dual technology combined with the algorithm of detector auto-tuning to the environmental conditions, stable operation in rain, snow, sunshine and strong gusts of air. The OPAL detector has a detection angle as wide as 100 degrees and a reach of more than 15 meters. IP54 rated; Tamper protection against opening and detachment; Small animal immunity option (up to 20 kg); Microwave frequency: 24 GHz; Warm-up period: 40 s; Supply voltage: 12 V DC; Operating temperature range: C; Recommended mounting height: 2,4 m; Standby mode current consumption: 12 ma; Max. current consumption: 20 ma; Relay contacts rated load (resistive): 40 ma / 16 VDC ; Without bracket SATEL OPAL PLUS Outdoor PIR + MW dual technology motion detector The OPAL Plus have anti masking function based on the microwave technology. The dual technology combined with the algorithm of detector auto-tuning to the environmental conditions, stable operation in harsh weather conditions, such as rain, snow, sunshine and strong gusts of air. The OPAL Plus detector is also provided with a dusk sensor for OC output control, which allows it to be used in alarm systems with home automation, without having to install additional dusk detectors. Configuration of the sensitivity of detection paths using the PCB buttons, IP54 rated; The OPAL detector has a detection angle as wide as 100 degrees and a reach of more than 15 meters. Tamper protection; Small animal immunity option (up to 20 kg); Microwave frequency: 24 GHz; Warm-up period: 40 s; Supply voltage: 12 V DC; Operating temperature range: C; Recommended mounting height: 2,4 m; Standby mode current consumption: 12 ma; Max. current consumption: 20 ma; Relay contacts rated load (resistive): 40 ma / 16 V DC; Alarm signaling time: 2 s; Without bracket SATEL OPAL PRO outdoor PIR+MW dual-tech motion detector OPAL Pro is an outdoor dual technology motion detector, which is ideally suited for use both outside of the protected building, and in the interiors where difficult or specific environmental conditions prevail (halls, shelters, sheds etc.). The OPAL Pro detector incorporates dualtechnology motion detection: PIR and MW. It also uses active IR anti-masking (for indoor use). Therefore, the device has a certificate of compliance with the high security requirements specified in EN for Grade 3: the detector can be used to protect the interiors of medium to high risk premises, like banks, museums, jewelry stores, etc. built-in dusk sensor to use the detector in automation systems; The OPAL detector has a detection angle as wide as 100 degrees and a reach of more than 15 meters. Configuration of detection and dusk sensor sensitivity circuits using PCB buttons; Built-in receiver of OPT-1 IR keyfob signal; Remote configuration of detection and dusk sensor sensitivity circuits using OPT-1 keyfob without having to open detector enclosure; Splash-proof polycarbonate enclosure, IP54 rated; Tamper protection against opening and removal from mounting surface; 3.050, , , ,00

20 89. Digital temperature compensation for correct detector operation in temperature range from -40 C to +55 C; Can be used in adverse weather conditions (rain, snow, fog, strong wind); High immunity to false alarms as a result of auto-tuning algorithm used; Creep zone control; Immunity to small pets (up to 20 kg); Low current consumption; Can be installed directly on flat surface or by using dedicated brackets from BRACKET C set: angle type bracket: fixed 45 angle, ball type bracket: adjustable up to 60 vertically and up to 90 horizontally SATEL BRACKET C Set of wall brackets for mounting outdoor detectors The BRACKET C set of wall brackets is designed for mounting the outdoor detectors of OPAL and OPAL Plus series. The set consists of two types: ball joint bracket and angle bracket. The ball joint bracket offers the swiveling vertical range of 60 and the horizontal swiveling range of , Гаранција SATEL AGATE Outdoor dual-tech curtain detectors AGATE is an outdoor curtain motion detector which belongs to the group of perimeter protection devices. It is ideally suited for use both on the outside of the protected building, and in the interiors where difficult or specific environmental conditions prevail (in halls, shelters, sheds etc.). The AGATE detector has two motion detection circuits PIR and MW, and uses active IR anti-masking (for indoor use). Thus, it meets the high security requirements specified in EN for Grade 3: the detector can be used to protect the interiors of high medium to premises, like banks, museums, jewelry stores, etc. The detectors have a detection angle of 10 and an operating range of 14 m; Two detection circuits: PIR and microwave; Active IR antimasking for indoor applications; Splash-proof polycarbonate enclosure, IP54 rated; Tamper protection against opening and removal from mounting surface configuration of detection circuit sensitivity with onboard potentiometers low current consumption; Can be installed directly on flat surface or by using dedicated angle bracket Glass break detector LH-501 Build-in microprocessor; Two-tone color display of LED; Optional sensitivity; Unique test mode; Lockable alarm mode; SMT technique of production; Anti-EMI and anti-rf interference; Static current: 15mA (12V DC ); Alarm current: 25mA; Detection range: High sensitivity: 9m, low sensitivity: 5m; Test time: 60s; Size: 92.0mm 67.0mm 26.4mm SATEL INDIGO Acoustic glassbreak detector Designed for plate, laminated and tempered glass; Advanced dual-path signal analysis; Auto diagnostic feature; Trimmer sensitivity adjustment; Environmental class: II; Operating temperature range: -30 C+55 C; Nominal supply voltage (±15%): 12 VDC; Standby mode current consumption: 13,5 Ma; Max. current consumption: 15 ma. SATEL TESTER INDIGO Acoustic glass break detector tester Adjustment and testing device for INDIGO detectors; Simulates plate, laminated and temperature glass breaking sound; Powered by single 9V 6LR61 alkaline battery. SATEL MAGENTA Digital glass break detector Dual path signal analysis; Detection of plate, tampered and laminated glass breaking; Stepless sensitivity adjustment; Test mode to facilitate adjustments; Environmental class according to EN : II; Alarm signaling time: 2 s; Detection range: to 6 m; Relay contacts rated load (resistive): 40 ma / 16 VDC; Supply voltage: 12 VDC; Operating temperature range: -10 C+55 C; Standby mode current consumption: 5 Ma; Max. current consumption: 10 ma , , , , ,00

21 SATEL AQUA RING 360 Ceiling mount digital PIR Fully digital detection; 360 lens; Digital temperature compensation; Pre-alarm feature; Environmental class according to EN : II; Recommended mounting height: 2,2 to 4,5m; Standby mode current consumption: 10 Ma; Max. current consumption: 12mA; Relay contacts rated load (resistive): 40mA / 16 VDC; Alarm signaling time: 2s; Coverage area when mounted at a height of 2.4 m: 36 m²; Coverage area when mounted at a height of 3.7 m: 80 m²; Supply voltage: 12 VDC; Detected target velocity: 0,3 3 m/s; Operating temperature range: -30 C +55 C. Water Sensor with leads TANE WS-1 This is an excellent way to warn a property owner of water damage; No mechanical parts to rust or wear out; 6 Foot jacketed leads; 12V Operating ; 10 ma Output 9V DC minimum; Stand offs To Protect Metal On Bottom; The WS-1 is a low cost reliable water sensor that works on 12vdc alarm panels on an 24 hr zone, open loop circuit. SATEL FD-1 Water flood detector Detection of water flood in the areas with water installations; Easy to install external sensor; Operating temperature range: -10 C+55 C; Nominal supply voltage (±15%): 12 VDC; Standby mode current consumption: 2,5 ma; Max. current consumption: 4 ma. Photoelectricity Vibratory Sensor RV971A Operating Voltage: 9-16VDC; Current: 15mA; Contact of Alarm: NC, 12VDC, 100mA max; Contact of Tamper: NC, 12VDC, 100mA max; Time to Alarm: 2.0s; Time to Warm-up: 1 minute; Operating Temperature: - 15ºC ~ 50ºC; Storage Temperature: -20ºC ~ 55ºC; Size: m SATEL VD-1 Vibration detector with magnetic contact Piezoceramic vibration sensor; Digital signal processing; Detection sensitivity and settings adjustment; NC relay output for connection to intruder alarm panels; Independent integrated magnetic contact; Environmental class: II; Operating temperature range: -30 C+55 C; Nominal supply voltage (±15%): 12 VDC; Standby mode current consumption: 3,5 Ma; Max. current consumption: 5,4 ma. SATEL TD-1 Programmable temperature detector Programmable threshold and temperature gradient; Possibility to work in two modes (economy feature); Support for external temperature sensor; Two relay outputs to control external devices; Environmental class: II; Supply voltage:12 VDC; Operating temperature range: - 10 C+55 C; Standby mode current consumption: 15±20% ma; Max. current consumption: 50mA; Relay contacts rated load (resistive): 1A / 30 VDC ,00 445, ,00 921, , ,00 MAGNETIC DETECTORS Magnetic contact HO-03C ABS Housing In White; COM.,N/O,N/C; Rated current: 100(mA); Rated Voltage(VDC): 200; Active Gap(mm): 15 25; Rated Power: 3(W); G.W.(kgs): 9; QTY(pcs): 800; Meas(mm): 300*250*32 SATEL K-1 Magnetic detector Max. Reed switched voltage: 20V; Max. switched current: 0,02A; Transient resistance: 0,15 Ω; Contact material: Ru ( Ruten ); Make distance: 18mm; Break distance: 28mm. SATEL K-2 Magnetic detector Max. Reed switched voltage: 20V; Max. switched current: 20mA; Transient resistance: 150Ω; Contact material: Ru ( Ruten ); Make distance: 28mm; Break distance: 40mm. 206,00 220,00 220,00

22 SATEL K-2 2E Magnetic detector with double EOL resistor (2 x 1.1kΩ) Max. Reed switched voltage: 20V; Max. switched current: 0,02A; Contact material: Ru (Ruten); Make distance: 28mm; Break distance: 40mm; Resistance: 2 x 1100 Ω. SATEL K-3 Magnetic detector (metal hausing) Max.reed switched voltage: 20V; Max. switched current: 0,02A; Contact material: Ru (Ruten); Make distance: 15mm; Break distance: 24mm; SATEL B-1M Side magnetic detector (white) Magnetic detectors constitute basic elements of perimeter protection systems and their primary task is to detect attempts of opening doors and windows. Medium size B-1M tight side magnetic detectors are designed for surface mounting ; Make distance: 30mm ; Break distance: 33 mm SATEL B-3A Magnetic detector (metal housing, screened wiring) Magnetic detectors are basic elements of a perimeter protection system. Medium size B-3A tight side magnetic detectors in a metal housing are designed for surface mounting ; Make distance: 38mm ; Break distance: 42 mm Metal magnetic contact 55L Housing: metal (alloy-al) grey; Output: N.C./N.O 310,00 340,00 360,00 730,00 856, Magnetic contact metal MCOH 1.292, SATEL B-4L Gate magnetic detector (metal housing) Large B-4L tight side magnetic detectors in a metal housing are designed for surface mounting. The metal screen protects the wiring against damage, which makes these detectors a perfect solution for locations particularly vulnerable to sabotage attempts or mechanical exposure; Make distance: 75mm ; Break distance: 80mm 1.350, PHOTOELECTRIC DETECTORS Photoelectric detector ABO-20L Receiver range: 10-15m; Optical axis adjustment(h)±15 ; All around tubber O-ring IP-66 waterproof grade; Adopt aspheric surface lens, optical gathered, powerful,concentric; Light resistance reaches 50.00lux, built-in automatic adjustment light filtering system. avoid the influence from strong light or car light; Unique Optical Design:The photoelectric beams have the ability to penetrate compound glass; When meet the bad weather and fog. the detector will enhance sensitivity automatically to distinguish circuit; Special structure design make it work in the bad environment properly. PHOTOELECTRIC DETECTOR m 1.140, , Photoelectric detector ABE 100 Number of beams: two beams ; Optical source: Infrared digital pulse ; 3 LED signal indicator; Alert distance: Outdoor 100m, indoor 300m ; Power supply: DC V ; Power consumption: 65mAmax; Alarm output: Relay contact output: NO, NC contact rating: DC30V 0.5Amax ; Tamper output: contact output: NC, contact rating: DC24V 0.5Amax 4.010,00

23 SATEL ACTIVA-2 Active infrared barrier with 2 beams The ACTIVA active infrared barriers are advanced perimeter protection detectors; Encrypted, synchronized transmission to prevent transmitter substitution; Powerful, high-performance processor; Up to 20 m range (up to 10 m outdoors); Bracket that allows installation parallel or perpendicular to wall; Optical and acoustic indication to facilitate installation; Hermetically sealed construction for protection of water sensitive components; Excellent performance in harsh outdoor conditions (snow, rain, falling leaves, etc.); Improved resistance to electrical interference; Operating temperature range: C SATEL ACTIVA-3 Active infrared barrier with 3 beams Up to 20 m range (up to 10 m outdoors) SATEL ACTIVA-4 Active infrared barrier with 4 beams Up to 20 m range (up to 10 m outdoors) SATEL ACTIVA-5 Active infrared barrier with 5 beams Up to 20 m range (up to 10 m outdoors) SATEL ACTIVA-7 Active infrared barrier with 7 beams Up to 20 m range (up to 10 m outdoors) 9.150, , , , , SATEL ACTIVA-K Angular holder with tamper for ACTIVA barriers (price for 4pcs. in one pack) 1.500, SATEL ACTIVA-D Distance piece for ACTIVA-K (price for 4pcs. in one pack) Photoelectric detector ABE 150 Number of beams: three beams ; Optical source: Infrared digital pulse ; 10 LED signal indicator ; Alert distance: Outdoor 150m, Indoor 750m ; With stainless steel base ; Alarm output: Relay contact output: NO, NC contact rating: DC30V 0.5Amax ; Tamper output: contact output: NC, contact rating: DC24V 0.5AMax Photoelectric detector ABE 250 Number of beams: three beams ; Optical source: Infrared digital pulse ; 10 LED signal indicator ; Alert distance: Outdoor 250m, Indoor 750m ; With stainless steel base ; Alarm output: Relay contact output: NO, NC contact rating: DC30V 0.5Amax ; Tamper output: contact output: NC, contact rating: DC24V 0.5AMax Photoelectric detector ABE 300 Number of beams: three beams ; Optical source: Infrared digital pulse ; 10 LED signal indicator ; Alert distance: Outdoor 300m, Indoor 900m ; With stainless steel base ; Alarm output: Relay contact output: NO, NC contact rating: DC30V 0.5Amax ; Tamper output: contact output: NC, contact rating: DC24V 0.5AMax 600, , , ,00 FIRE / GAS DETECTORS Smoke detector PD-01 12V Static current: 2mA(DC12V); -Alarm current: 10mA (DC12V); Alarm output: NO/NC Smoke detector LH-97L Network output; Special design for bracket, easy to installation; Best adaptability with environment; Manual test & retest function; High stability ; High Density SMT Design; Unique structure with dustproof, anti-fly, anti-light design; Auto reset function; Power Input: DC 12V; Static Current: 300uA; Alarm Current: 30mA; Operating temperature: -10 to +50 ; Operating Humidity: 95% RH; Alarm Output: N.O./N.C.; Sensitivity: Ⅰ level; Detecting Area: 20 Square Meter; Heat detector ID112 Operating Voltage: 12VDC; Alarm current: 30mA; Alarm display: double LED; Output type: relay output; Resetting: automatic; Humidity: 90%; 1.073, , ,00

24 Applications: alarm panels Optic detector OD912 Operating Voltage: 12VDC; Alarm current: 80mA; Alarm display: double 127. LED; Output type: relay output; Resetting: automatic; Sensor element: 1.300,00 IR; Humidity: 90%; Applications: alarm panels 128. Base EC DB for detector ID112 ; OD , Smoke and heat detector PA-424 Operating voltage: 12VDC ; Sensitivity: 0.2dB/m(±0.1dB/m); Standard: EN54-7/UL268 ; Alarm temperature: 60±2 C ; Temperature range: -10 C ~ 50 C ; Alarm indication: red LED on 2 wire: Standby current: 20uA ; Alarm current: 35mA ; Alarm output: remote led ; Contact rating: N/A 4 wire: Standby current: 4mA(relay N.O.), 13mA(relay N.C.) ; Alarm current: 19mA(relay N.O.), 9mA(relay N.C.) ; Alarm output: RELAY output ; Contact rating: 0.5A@DC28V 1.520,00 Gas detector for LPG LH V/12V (optional); MCU processing; High stability, energy-saving sensor ; Wall Mounted; Electromagnetic Valve; Rated voltage: DC 9V, Closing Method: AC bluse closing; Valve compress:0.1mpa; Closing time: 1S; Size:103*64*47mm; Induced Gas: Natural Gas; Power Input: 130. AC 220V 50Hz Or DC 12V; Buzzer Level: 70dB/m; Alarm Density: 1.599,00 15% LEL; Working Temperature: -10 to + 40 ; Working Humidity: 90% RH; Alarm Density Error: ±5% LEL; Alarm Mode: Flash & sound alarm /Shut off Gas Valve/ Network Alarm Signal; Power Consumed: 5W; Size: 120 * 70* 44mm SATEL TSD-1 with base Universal smoke and heat detector for alarm systems Unique Swirl chamber for increased smoke sensitivity; EN54-7 compliant smoke detection; EN54-5 compliant heat detection; Selectable operating mode (smoke, heat, multi sensor); Line type 131. configuration (NO/NC/2EOL) with DIP switches; Smoke chamber dirt 1.840,00 build-up indicator; Supply voltage: 12 VDC; Minimum static response temperature: 54 C; Maximum static response temperature: 65 C; Standby mode current consumption: 50 µa ; Max. current consumption: 24 Ma; Compatible with all 12V alarm panels SATEL DG-1 ME Methane detector Digital signal analysis; Optical and acoustical indication of threshold concentration detection; Pre-alarm feature; Full auto diagnostics; Yellow LED indicator; Enclosure dimensions: ø97 x 36 mm; Operating temperature range: -30 C +55 C; Nominal supply voltage (±15%): 12 VDC; Standby mode current consumption: Ma; Max. current consumption: 50 ma. SATEL DG-1 LPG Liquified petroleum gas detector Digital signal analysis; Optical and acoustical indication of threshold concentration detection; Full auto diagnostics: pre-alarm feature; Green LED indicator; Enclosure dimensions: ø97 x 36 mm; Operating temperature range: -30 C +55 C; Nominal supply voltage (±15%): 12 V DC; Standby mode current consumption: Ma; Max. current consumption: 50 ma. SATEL DG-1 CO Carbon monoxide detector Digital signal analysis; Optical and acoustical indication of threshold concentration detection; Full auto diagnostics; Nominal supply voltage (±15%): 12 V DC; Red LED indicator; Enclosure dimensions: ø97 x 36 mm; Operating temperature range: -30 C +55 C; Standby mode current consumption: 9-20 Ma; Max. current consumption: 20 ma. SATEL DG-1 TCM Trichloromethane based narcotic gas detector Digital signal analysis; Optical and acoustical indication of threshold concentration detection; Full auto diagnostics; Blue LED indicator; Enclosure dimensions: ø97 x 36 mm; Operating temperature range: - 30 C +55 C; Nominal supply voltage (±15%): 12 VDC; Standby mode current consumption: Ma ; Max. current consumption: 120 ma , , , ,00

25 VOICE MODULES/ TELEPHONE DIALERS Line control module EDS HK1 Checks the telephone line ; Compatible with all computers and alarm panels Gives alarm when the telephone line cut ; Relay output ; 12VDC- 15VDC Paradox VDMP3 Plug-In Voice Module; Compatible with SP series (V2.10 or higher), MG Series (V2.10 or higher), EVO control panels and PCS200 GSM module; Record a "Site ID" to identify the installation site (Requires EVO V2.10 to program); Dial up to 8 telephone numbers to report a burglar, panic or fire alarm using prerecorded messages; Arm/disarm the system remotely via telephone; Control PGMs and toggle utility keys remotely via telephone; Voice-guided menu; In-field upgradeable; Connects directly onto the control panel Voice telephone dialer EDS SD630A 6 phones dialing; If dialed numbers do not answer, can call 5 times; 16 seconds voice massage recording time; Recorded massages and telephone numbers are not erased in case of power failure; Special password for each number; Receives the lines and calls in case of alert even if the line is busy; Relay can be controlled by special password; Microprocessor controlled; DC12V Voice telephone dialer VD2005 Compatible with all types of PTT stations; Ability to work with all types of control panels ; It can connect to extension switchboard (Max. 5 Digit); 114 Digit with spaces external phone memory; 7-14 Phone Memory in accordance with phone number length; 40-second digital voice message record; It can have each phone number listen to the alternating sec. message; It can dial each number max.9 times GD-120 GSM telephone dialer (SMS) 2 phones record; 2 SMS sending; 3 dry contact inputs; 2 separate sound recording; LED indicators; DC 12V SATEL INT-VG Voice module Voice menu controlled remotely with any DTMF telephone ; Message recording with the use of text-to-speech technology to eliminate awkward microphone recording; Remote arming/disarming and output control for home automation devices; Remote system status checking MACRO feature for triggering of multiple actions with single command module management with free VG-SOFT application; 16 messages recording for voice messaging; Compatible with VERSA and INTEGRA SATEL INT-AVT Alarm acoustic verification panel The INT-AVT alarm acoustic verification panel supplements the INT-AV module. It is equipped with a speaker and a microphone which enable two-way voice communication between the monitoring station personnel and persons present in the protected site. Two-way transmission of audio signals between the intercoms and the telephone line; Up to 4 INT-AVT panels may be connected to the INT-AV module SATEL INT-AV Alarm acoustic verification module The INT-AV alarm acoustic verification module allows for initial, remote threat evaluation by listening to the situation in the protected building. Two-way transmission of audio signals between the intercoms and the telephone line; Works with up to 4 intercoms working in half duplex mode ; Environmental class according to EN : II; Supply voltage: 12 VDC; Operating temperature range: -10 C+55 C, Maximum humidity: 93±3%. TCP/IP / GSM / GPRS MODULES 1.138, , , , , , , ,00

26 SATEL ETHM-1 Plus Ethernet communication module Supported by the control panels of INTEGRA, INTEGRA Plus and VERSA families; TCP/IP or UDP reporting; Remote programming via DLOADX program; INTEGRA system supervision via GUARDX program; Ability to operate the system from a mobile phone using the MobileKPD-2 and MobileKPD-2 Pro application; Event notification capability using messages (only INTEGRA Plus); Support for DHCP automatic address configuration; Open protocol for systems integration via the TCP/IP channel; Supply voltage: 12 VDC; Operating temperature range: -10 C+55 C; Standby mode current consumption: 70 Ma; Max. current consumption: 80 Ma. SATEL PIN5/RJ-TTL Cable for connecting of ETHM-1 module with VERSA PIN5/RJ-TTL is a cable for connecting ports of ETHM-1 and ETHM-1 Plus modules with RJ sockets of VERSA control panels. SATEL GPRS-T2 GPRS/SMS reporting module GPRS-T2 is a GPRS/SMS module used in the intruder alarm systems for reporting and messaging via the GSM network. The main task of the module is to monitor the status of inputs. A status change triggers coded transmission of event messages to the monitoring stations via GPRS (e.g. to the STAM-2 monitoring station or the SMET-256 converter). Also available is sending a code by SMS messages to predefined phone numbers or any monitoring stations that support this format. In case of any problems with GPRS transmission, the module can automatically switch over to SMS reporting mode. For certain functions, it is also possible to use the CLIP service to identify the caller and display the caller's number. This allows toll free triggering and sending test transmissions. GPRS-T2 allows remote monitoring of the performance of various devices, including the alarm control panels not equipped with telephone communicator. The module can be programmed and configured either locally via RS-232 or remotely via GPRS from a computer running the GPRS-SOFT program. Some parameters can be programmed using SMS messages. The module is provided with 5 programmable inputs, either digital (NO, NC) or analog. When configured as analog ones, the inputs can be used in automation systems, or for monitoring of a wide range of external devices, such as analog sensors of temperature, pressure and humidity. GPRS-T2 uses an industrial GSM phone and requires a SIM card with properly selected tariff plan or prepaid plan, making it possible to use GPRS technology. SATEL GPRS-T4 GPRS/SMS reporting module The versatile GPRS-T4 communication unit is designed for GPRS and SMS monitoring from any alarm control panel or other device. An additional functionality of the GPRS-T4 unit is the remote control of the module's outputs, which allow for e.g. activation or deactivation of the alarm system stand-by mode using SMS. 8 monitoring triggering or message inputs; Dedicated input for AC power supply monitoring; 4 outputs with remote control option; automatic switching to SMS in case of lack of GPRS signal; SMS/CLIP messaging; Sending test transmission using CLIP; Communication failure signalling TTT603 GSM telephone modem GSM Dual Band, Compatible with GSM 900 /1800 MHZ networks; Builtin Digital antenna; send and receive voice call; send and receive SMS; Interrogate your voic ; Voice and SMS service ( Your phone and the distant phone, and all networks must support the SMS feature); Information at a glance status LEDs, a new voice mail messages and other important functions; Ring voltage: 68V; Power Supply: DC12V SATEL GSM LT-1 GSM module with antenna ANT-900/1800 or ANT-OBU-Q The GSM LT-1 communication module makes it possible to use GSM paths to provide monitoring and messaging functions in alarm systems. The GSM LT-1 module makes it possible to implement monitoring as well as text and voice messaging functions; Remote programming of control panels via GPRS, GSM gateway for telephone exchanges; Max. current 7.600, , , , , ,00

27 consumption: 350 ma ; Environmental class according to EN : II ; Supply voltage: 12 V DC; Operating temperature range: C GSM modem SLINK-LITE Reserve telephone line generator; On-board voice module with 15 minutes ; Anti-intrusion function; Dialler over GSM network and PSTN landline and GPRS modem; Dialler over PSTN landline; SMS dialler over GSM network ; Manges DTMF commands over GSM network; Manges DTMF commands over PSTN landline; Priority channel choice between SM network and PSTN landline; Fault signalling Incoming SMS divert ; Actions using Caller ID; Manages commands via SMS with code or identifier of the sender; Ring or SMS confirmation for commands receiving via SMS ; Warning calls for each event over GSM network and PSTN landline; Manages GPRS for remote programming/monitoring; Manages supervision over GPRS ; Manages SIA-IP and transmits information to alarm receiving centres via the most widely used protocols; Answerphone with voice menu; Manages and signals Roaming status; EasyScan function; SIM card credit enquiry. Voltage:Normal output voltage: 13.8 Vdc ±10%, function range: 11-16V; Switching power supply: 14V dc 1.05A; Inputs: 5; Outputs:5. MONITORING SATEL SMET-256 TCP/IP reporting converter to telephone formats The SMET-256 converter is a device that is intended primarily for alarm system monitoring companies, security agencies, etc. It receives events sent via TCP/IP network by SATEL devices (e.g. ETHM-2 Ethernet module, GPRS-T2 module). Depending on the converter settings, the events are sent to the monitoring station (e.g. STAM-2) via telephone cable or RS-232 communication bus. The converter can operate in advanced mode (up to 256 subscribers, with communication control) or in basic mode (without control of communication with the subscriber). SMET-256 can simulate both the analog phone line, and one of the following receivers: RC-4000 VISONIC, SurGard (MLR2/MLR2E), RSM-02. SMET-256 has an event receipt acknowledgment function, which allows you to verify correctness of the transmission. Received events are kept in the converter memory until they are sent to the monitoring station. SMET- 256 is also provided with protective options, such as Ethernet cable presence control and receiving transmissions only from devices with defined MAC numbers, that protects the converter against hacking attempts. Support for up to 256 subscribers with individual link supervision;support for automatic IP address configuration with DHCP. SATEL STAM-2 BE STAM-2 BE is a monitoring package which includes: STAM-1 PE Ethernet receiver base card, basic version of STAM-2 software with license for 3 workstations, USB protection dongle and receiver card installation guide. STAM-1 PE TCP/IP receiver base card The device is a complete receiver of TCP/IP reporting from SATEL ETHERNET and GPRS devices. It allows you to set up a supervision center for monitoring the state of connected alarm systems. STAM-1 PE can be installed in the PCI slot of any PC computer, from which it only derives power. It communicates with the PC computer via the RS-232 port (DB-9 connector). Each Ethernet receiver base card is provided with a RJ-45 jack connector for the Ethernet network, which enables one IP address to be assigned to the monitoring station. The module can handle up to 256 subscribers with filtration of incoming events based on the physical (MAC) address. The events being received are buffered in memory until sent to the monitoring station, to prevent loss of data. SIRENS , , ,00

28 153. Siren BS-1 External siren with double armor with Fleisher (Red), 110db, 12V, (battery excluded) , Siren 305 External siren with double armor with Fleisher (Red), Operating Voltage: 13.5VDC ; Current consumption standby: 1300mA (DV=13.5V) ; Backup Battery: Rechargeable Lead Acid Battery 12V up to 1.3Ah (battery excluded); Siren output: 120dB/m ; Operating temperature: ; Flash rate: 70-90times/min ; Material: ABS Housing with UV resistance ; IP Rating: IP55 ; 2 way tamper switch protection SATEL SP-6500 R Outdoor siren with optical signaling Acoustic signalling: piezo; Optical signalling: LED; inner metal shield; Sound pressure level at 1m: up to 120dB; Tamper protection against: removal from mounting, lid opening; optional 12 V 2,3 Ah battery; built in level to facilitate aesthetic mounting ; Environmental class according to EN : IV SATEL SP-4002 R Outdoor siren with optical and acoustical signaling (battery back-up) Microprocessor controlled; The intensity of sound: 120dB ; Acoustical signaling: piezo transducer; Optical signaling: ultra bright LEDs; Inner metal shield; tamper protection against opening and removing from mounting surface; Sealed lead acid back up battery included Outdoor, Tampering Protected Siren SIR/PL Outdoor siren with flasher ; Acoustic pressure: 120 m; Tamper switch contact: 1A / 12V ; Flash lamp: High Bright LED ; Operating voltage: V DC ; Stand by current drain: 10 ma ; UV protected, polycarbonate plastic box ; (battery excluded) , , , , Siren SS-106 Rated Voltage: DC12V ; Operating Voltage: DC9-15V ; Rated Current: 300mA ; Strobe source: Xenon Tube/LED ; Flash Frequency: times/minute ; Sound SPL: 110dB ; Operating temperature: -20~60 C 856, Alarm horn ES-626 Rated voltage: DC 12V; Rated power: 10W/20W; Sound pressure: 120dB / 30cm Siren SL-02 Rated Voltage: DC12V ; Operating Voltage: DC9-15V ; Rated Current: 150mA ; 12V strobe light ; Strobe source: Xenon Tube/LED ; Flash Frequency: times/minute ; Sound SPL: 110dB ; Operating temperature: -20~60 C Internal siren SS dB; DC 12V Internal siren TA-747 Rated voltage: DC 12V; Rated current: 600mA ; Rated power: 15W; Siren output: 115±3dB at 1m Siren 109 Rated voltage: DC 12V; Rated current: mA; Rated power: 30W/40W; Siren output: 120dB at 1m; Tones: 2 tones 840,00 488,00 500,00 400,00 519, ,00

29 Rotary Signal Lamp LTE 1101 Working voltage: DC 12V; Color: red; Fastness: bolt fitting (LTE); Power: 10W SATEL BOXES SATEL Metal box (for INTEGRA 24, CA-5, VERSA 5/10/15, MICRA) Possibility to install wireless devices with antennas inside; Dimensions: 280 x 280 x 76 mm; Space for 40 VA or 60 VA transformer. SATEL Metal box with tamper (for INTEGRA 24, CA-5, VERSA 5/10/15, MICRA) Possibility to install wireless devices with antennas inside; Dimensions: 280 x 280 x 76 mm; Space for 40 VA or 60 VA transformer. SATEL Enclosure OPU-4 P (for INTEGRA 24, INTEGRA 32, CA-5, VERSA 5, VERSA 10, VERSA 15, MICRA, PERFECTA) Double tamper protection; Possibility to install wireless devices with antennas inside; Dimensions: 266 x 286 x 100 mm; Space for 40 VA or 60 VA transformer; Option to mount APS-412 power supply in place of transformer; expansion modules manufactured by SATEL, GSM communication modules manufactured by SATEL. SATEL Enclosure OPU-3 P (for INTEGRA 64, INTEGRA 128, INTEGRA 256 Plus) Tamper protection against: opening, removing from mounting surface; Removable plates simplifying system installation and maintenance possibility to install wireless devices with antennas inside; Dimensions: 324 x 382 x 108 mm; Space for 40 VA or 60 VA transformer; Space for 12 V 17 Ah sealed lead acid battery; Option to mount APS-412 power supply in place of transformer; expansion modules manufactured by SATEL, GSM communication modules manufactured by SATEL, ACCO door controllers with and without power supply, ACCO-NT access control panel. SATEL ACCESSORIES SATEL USB-RS USB-RS converter for programming SATEL devices The USB-RS converter makes it possible to connect to the computer SATEL devices provided with RS-232 or RS-232 (TTL) port. It also allows you to program SATEL radio controllers. SATEL VIVER Video alarm verification unit 4 video inputs for CCTV cameras; 4 inputs for transmission triggering; Camera images sequence buffering; Built-in TCP/IP communicator; Builtin 56k modem as transmission backup; PC software for module configuration PANIC / EMERGENCY BUTTON Emergency button HO-01 ABS Plastic Or Metal Case Body; Contact Mode: COM.,N/O; Rated current: 300; Rated Voltage: (VDC) 250 Emergency button HO-02 -Profile:ABS Plastic Or Case Body Contact Mode: COM.,N/O 801,00 930, , , , , ,00 229,00 400,00 SATEL PNK-1 Latching panic button Triggers panic alarm and remote notification for hold-up situation ; ,00 Compatibility with all panels supporting NC zones ; Max. Switched power: 5 VA ; Max. reed switched voltage: 160V ; Max. switched current: 0,250A Foot panic button AB1 / TFS ,00 Surface mount; Silent operation; High sensitivity 175. Foot panic button metal TFS-1-white 1.247,00

30 176. RADIO REMOTE CONTROLLERS Remote set 1ch. CT-01-W without battery Range: 50 meters ; Operating voltage: 12V DC ; Channels: 1; Signal Coding: 4 bits; Working Current: 6mA; Output relay: 7A ; Dry contact relay output ; Operating Frequency: 315MHz / 433MHz ; Working temperature: -20 C to + 50 C ; Working Mode: momentary; Encode/decode: auto code learning , Remote 1ch. CT-01 without battery 572, SATEL RX-1K Receiver with two remote controllers One programmable channel ; Support for up to 40 key fobs ; Operating range up to 200 m open space ; Operating frequency range: 433,05 434,79 MHz ; Current-carrying capacity of LV (OC) output: 50 Ma ; Current-carrying capacity of SS (OC) output: 500 ma ; Receiver supply voltage: 12 V DC SATEL RX-2K Receiver with two remote controllers Two separate, programmable channels; Support for up to 340 key fobs ; Operating range up to 200 m open space ; Operating frequency range: 433,05 434,79 MHz ; Current-carrying capacity of LV (OC) output: 50 Ma ; Current-carrying capacity of SS (OC) output: 500 ma ; Receiver supply voltage: 12 V DC SATEL P-2 Remote controller Number of channels: 2 ; Remote control keyfob battery type: 23A 12V ; Operating temperature range: ºC SATEL RXH-1K Universal radio controller set The radio controller set provides a versatile solution for control of alarm systems, automatic opening gates or other devices. Operating frequency band: 433,05 434,79MHz; 1 independent channel with a relay output; Outputs can be configured for monostable mode (on time) or bistable mode (On/Off); Support for up to 40 key fobs which can be managed using PC computer; Key fob low battery indication; Acknowledgement of arming/disarming; PC configuration; Operating range up to 300 m in open area; Supply voltage:12v DC SATEL RXH-2K Universal radio controller set The radio controller set provides a versatile solution for control of alarm systems, automatic opening gates or other devices. Operating frequency band: 433,05 434,79MHz; 2 independent channel with a relay output; Outputs can be configured for monostable mode (on time) or bistable mode (On/Off); Support for up to 340 key fobs which can be managed using PC computer; Key fob low battery indication; Acknowledgement of arming/disarming; PC configuration; Operating range up to 300 m in open area; Supply voltage:12v DC SATEL MPT MHz Remote control key fob Multifunction remote control key fob. It allows not only to easily arm and disarm the system, but also to call for help (start the panic alarm), or control other devices, for instance, the entrance gate. Environmental class according to EN : II; Operating frequency band: 433,05 434,79 MHz; Radio communication range (in open area): to 100 m. Receiver GV S / CT-02-B Range: 50 meters; Operating voltage: 12V DC ; Channels: 2; Signal Coding: 4 bits; Working Current: 6mA; Output relay: 7A ; Dry contact relay output ; Operating Frequency: 315MHz / 433MHz ; Working temperature: -20 C to + 50 C ; Working Mode: momentary; Encode/decode: auto code learning , ,00 680, , , , ,00

31 185. Remote 802S without battery 2 ch. 572, Set RX+TX JW-T01+TB03 without battery Working voltage: AC 220V ; Working current: 6 ma or less ; Working Frequency: 315 MHz ; Output current: 7A ; Range: 50m ; Auto code learning ; Working mode: open / close / stop ; Working temperature: - 40 C to +80 C Set RX+TX JW-T01+TA03 without battery Working voltage: AC 220V ; Working current: 6 ma or less ; Working Frequency: 315 MHz ; Output current: 7A ; Range: 50m ; Auto code learning ; Working mode: open / close / stop ; Working temperature: - 40 C to +80 C Tree channel receiver UZ-R3 with 3 remote UZ-T3 DC 12 VDC ; 3pcs dry contact relay output ; TOGGLE mode or 1 second active relay output option ; Relay outputs can be used as push button or switch ; Tree channel remote control ; 3 buttons ; 30m range in open area ; 20m range in covered area 2.060, , , Battery for remote 12V 60mA ALK.V23 LR23 140,00 BATTERIES / TRANSFORMERS / POWER SUPPLIES 190. Battery Ultracell 12V / 1,3 Ah 515, Battery Ultracell 12V / 4 Ah 940, Battery Ultracell 12V / 7 Ah 1.170, Battery Ultracell 12V / 18 Ah 3.300, Battery 6V / 12 Ah 1.470, Transformer EI-66 AC 16.5V, 3A, 50W 560, Transformer EI-66 AC 16.5V, 5A, 90W 683, Transformer EI-66 AC 18V, 40VA 732, Transformer AC 12V, 5A, 60W 618, SATEL TR 40 VA 230V/18V AC Transformer 230 V/20 V AC, 40 VA; For OPU-3 P and OPU-4 P enclosures SATEL TR 60 VA 230V/18V AC Transformer 230 V/20 V AC, 60 VA; For OPU-3 P and OPU-4 P enclosures SATEL APS-15 Backup power supply High effectiveness switching mode power supply; 1.5 A total output current; Short circuit and overload protection built-in; Designed for use with sealed lead-acid batteries; Battery charging circuitry with current controller; Battery deep discharge protection; 2 OC outputs for remote supervision; Optical indication of power supply state; Acoustical failure indication; Transformer supply voltage: 230 V AC SATEL APS-30 Backup power supply High effectiveness switching mode power supply; 3A total output current; Short circuit and overload protection built-in; Designed for use with sealed lead-acid batteries; Battery charging circuitry with current controller; Battery deep discharge protection; 2 OC outputs for remote supervision; Optical indication of power supply state; Acoustical failure indication; Transformer supply voltage: 230 V AC SATEL APS-412 Backup power supply with transformer High efficiency 12 V DC switching mode power supply, requiring no mains transformer; 4A total output current; Designed for use with sealed lead-acid batteries; 3 OC outputs for trouble indication; Audible trouble signal; Dedicated connector for use with new SATEL modules; Designed for mounting on DIN 35 mm rail and in OPU-3 P, OPU-4 P; Supply voltage: 230 V AC; Battery failure voltage threshold (±10%): 11,5V; Battery cut-off voltage (±10%): 9,5V , , , , ,00

32 204. Relay 12V / NC / NO 169, Battery CR123A 1400mA (ш ) АКЦИЈА 190,00 CABLE 206. Cable 6 x 0,22 mm unshielded 14,00 ден/m 207. Cable 6 x 0,22 mm shielded 15,00 ден/m 208. Cable 6 x 0,22 mm full Cu shielded 22,00 ден/m ALARM SYSTEMS PARADOX Paradox Control Panel SP7000 Supports StayD mode; On-board Zones: 16 (32 with ATZ); Keypad Zones: 15; Expandable to 32 zones; PGMs: 16 (4 on-board); 2 Partitions; 4-wire expansion bus; 32 User Codes; Supports PSC100 GSM Module; Supports IP100 Internet Module; Supports VDMP3 Plug-in voice dialer; Supports REM3 hand-held remote keypad (require RTX3 V1.31 or higher); In-field firmware upgradeable via a 307USB and WinLoad; Multiple phone numbers: 3 for monitoring station, 5 for personal dialing and 1 for pager reporting; 2-Wire Smoke Detector Input; 256 events buffered; without box and keypad. Paradox Control Panel EVO192 8 on-board zones (16 w/ zone doubling); Maximum Zones: 192; PGMs: 250 (5 on board); Built-in access control features; User Codes: 999; Partitions: 8; Events Buffered: 2048; Supports PCS Series, IP Module (IP100) and Voice Module (VDMP3); Expansion Modules: 254; Remote Controls: 999 (w/rtx3); In-field firmware upgrade via 307USB and WinLoad; Compatible with NEware V4.0 or higher; Automatic Daylight Savings Time feature; PGM1 can be used as a 2-wire smoke input; Program remote controls using the master or installer codes; Built-in real-time clock backup battery; 1 supervised bell output, auxiliary output and telephone line. Paradox keypad K32LCD 32-character blue LCD with programmable labels; Real-time zone alarm display (until disarmed); In-field firmware upgrade via 307USB and WinLoad; StayD status LED; 1 keypad zone input; 8 one-touch action buttons; 3 keypad-activated panic alarms; Adjustable backlight, contrast and scroll speed; Connects to 4-wire expansion bus; Compatible with MG5000, MG5050 and Spectra SP series V2.31 and up; Compatible with SP4000, SP65 V4.90 and up. Paradox Touch Interface Module TM40 Intuitive, icon-based interface via touchscreen, with quick menu-driven prompts; 10.9 cm brilliant and vivid widescreen color display; Compatible with EVO (V2.16 or higher), MG5000/MG5050, SP5500/SP6000/SP7000 (version 4.72 or higher), and SP4000/SP65 (version 4.90 or higher); Optional: supports up to 32 floor plans (EVO), or 8 floor plans (MG/SP); Customizable labels: zones, areas, users, and PGM outputs; Controls up to 8 PGM outputs; Supports WinLoad, not NEware; External micro SD card slot for firmware upgrades and uploading photos etc; Built-in indoor temperature sensor; 1 zone/temperature input to connect a detection device or exterior temperature sensor (TEMP07); Paradox DG65 Quad Element Digital Motion Detector; Digital Dual Opposed Detection; Interlock Sensor Geometry; Quad element sensor; 12m X 12m ; 110 viewing angle Paradox NV35M Outdoor/Indoor Window and Sliding Door Dual Detector with Anti-Masking and Pet Immunity; Anti-masking - Active IR detection for sprayed liquids and blocking items up to 30 cm; Integrated creep zone detection; Dual detectors controlled by Full Authority Digital Electronics Control (FADEC); Optical pet discrimination geometry to support Super Pet Immunity; Dual tamper detection; Wired, Solid State 5.885, , , , , ,00

33 Relay output 215. Paradox DG85 Outdoor High-Security Digital Motion Detector; Impact and temperature resistant casing (-35 C to 50 C ); Patented Digital Motion Detection; Extremely reliable and false-alarm free; Dual Optical Filtering 7.100,00 System; UV protected lens; Dual optics (2 dual opposed element sensors); Digital Dual Opposed Detection; Multi-level sensitivity adjustment; Two operational modes (Bus or Relay operation) Paradox NV780 Digital Outdoor Dual Side-View Detector with 4x Dual Sensors; Two double passive infrared motion detector with eight narrow detection beams, managed by Full Authority Digital Electronics Control (FADEC); High-resolution and full dynamic range digital signal conversion; Highspeed, advanced algorithm digital signal processing; Digital EMI / RFI interference rejection; True Pet Immunity, up to 40kg; 4x dual element sensors arrangement; High efficiency long focal point (1.77") lens, providing long-range narrow beams; 2 pairs of narrow beams per side provide 2x signals per protected area crossing for increased "catch" and false alarm rejection; Combination optics of mirror reflector and 2nd generation Fresnel "LoDiff" Lens; Increased white light rejection; Single or Dual Zone operation modes: two sides can report to a single zone or to two separate zones; Optical and digital range adjustments; Bright LED and buzzer indicator for clear adjustment feedback ,00 Paradox DG457 Glassbreak Bus Detector; Two operational modes (addressable for the Digiplex EVO series or conventional relay operation); Full audio and infrasonic spectrum analysis; 7 frequency digital filters, digital amplifier 217. gain and frequency fluctuation assessment; Impact and shock wave 2.114,00 analysis; High-immunity to RFI and EMI signals; Adjustable sensitivity: covers up to 9m when set to high and up to 4.5m when set to low; Anti-tamper switch Paradox DG Ceiling Mounted Digital Motion Detector; Two operational modes (addressable for the Digiplex and Digiplex EVO series or 2.265,00 conventional relay operation); Dual opposed element sensor; Digital Detection; 7m x 6m at 2.4m; 11m x 6m at 3.7m; 360 viewing angle Paradox 460 Vertical View Motion Detector; Adjustable lens position (0 or 10 ); Selectable operational voltage (12Vdc or 24Vdc); Adjustable alarm signal 2.222,00 duration; Detects hand-sized objects for card access applications: 2m X 1.5m ; Detects body-sized objects for security applications: 6m X 4.5m; 220. Paradox DM50 Dual Element Motion Detector Module; Patented Digital Motion Detection (no analogue circuitry); Digital Auto Pulse Signal Processing; 2.114,00 Digital Shield algorithm software; Metal shield maximizes protection from EMI and RFI signals; 12m X 12m range with 110 viewing angle Paradox Bracket SB , Bracket WS SB ,00 Paradox Bracket SB85 For use with the PMD85 and the DG85 outdoor digital PIRs 921, PARADOX WIRELESS ACCESSORIES Paradox GPRS14 Communication Plug-in Module; Accessory for the MG6250, used to support GPRS/GSM/SMS reporting; Supports 2 standard GSM provider SIM cards, for provider redundancy -Simple installation; connects directly onto PCB. Paradox SR120 Indoor Wireless Siren with Built-in Strobe Light (433MHz); Compatible with MG Series V4.0 and SP series V4.0 when using an RTX3 V1.5; Wireless siren (100dB or more) with integrated strobe light; Wireless range in a typical residential environment: - 35m with MG6160, MG6130, and MG6250; - 70m with MG5000, MG5050 and RTX , ,00

34 Fast alarm response time (within 4 seconds); 2.5 hour alarm display (strobe flashes every 4 seconds after bell cutoff); Dual tamper protection (cover removal, and removal from wall); In-field firmware upgradeable via 307USB; Fully powered using three 1.5Vdc type "C" alkaline batteries (not included) Paradox G550 Wireless Glassbreak Detector (433MHz); 6m radius range and 360º coverage pattern protects an entire room with one sensor; Detect breaking of different types of glass including plate, tampered, laminated and wired; Standard Alkaline 3x AAA type battery with low battery supervision; Factory-set sensitivity for safer installation; Recognizes actual pattern of breaking glass across the full audio band; Impact and shock wave analysis; High-immunity to RFI and EMI signals. Paradox NVR780 Wireless Digital Outdoor Dual Side-View Detector with 4x Dual Sensors Advanced Digital Technology: Two double passive infrared motion detector with eight narrow detection beams, managed by Full Authority Digital Electronics Control (FADEC) ; High-resolution and full dynamic range digital signal conversion ; High-speed, advanced algorithm digital signal processing ; Digital EMI / RFI interference rejection ; True Pet Immunity, up to 40kg Advanced Optical Technology: 4x dual element sensors arrangement ; High efficiency long focal point (1.77") lens, providing long-range narrow beams ; 2 pairs of narrow beams per side provide 2x signals per protected area crossing for increased "catch" and false alarm rejection ; Combination optics of mirror reflector and 2nd generation Fresnel "LoDiff" Lens ; Increased white light rejection Advanced Wireless Operation: Ultra low power management operation with Paradox Effi+ circuit ; Dual tamper detection (removal of cover or unit) Easy Installation and Setup: Single or Dual Zone operation modes: two sides can report to a single zone or to two separate zones ; Optical and digital range adjustments ; Bright LED and buzzer indicator for clear adjustment feedback ; No need for PCB removal ; Wall mount, with built-in level tool ; In-field firmware upgradable via serial port Paradox WC588P Wireless Carbon Monoxide Detector (433MHz) Highly sensitive electrochemical carbon monoxide sensor ; DC battery operated wireless alarm ; Built-in siren ; Protection against the ingress of foreign bodies / Insect Guard ; Anti-tamper sensor ; Test / Hush button ; LED operation indicator ; Low battery indicator Paradox REM3 Hand-Held Two-Way Remote Keypad (433MHz); Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher); Supports StayD; Configure which partitions the REM3 arms/disarms; Independent Arm, Sleep, Stay and Off buttons and LED display per partition; Control up to 6 PGMs and/or generate panics; Keypad Mode: Requires code entry; Remote Mode: One-touch arming / Disarming; Installer Diagnostic Mode: Partition 1 LEDs = Signal Strength Display, Partition 2 LEDs = RF Interference Display; Compact, water-resistant design Paradox DCTXP2 2-Zone Wireless Door Contact (433MHz); 2-zone capabilities where each zone is independent and has its own serial number; Zone 1 - One high-sensitivity reed switch (magnet included); Zone 2 - Universal transmitter input (N.O./N.C.); -Anti-tamper switch; Wireless range in a typical residential environment: - 30m with MG6160 and MG6130; - 60m with MG5000, MG5050 and RTX3 Paradox DCT2 Ultra-Small Door Contact (433MHz); One high-sensitivity reed switch (magnet included); Anti-tamper switch; Wireless range in a typical residential environment: - 20m with MG6160 and MG6130; - 40m with MG5000, MG5050 and RTX , , , , , ,00

35 232. Paradox RPT1 Wireless Repeater Module; Built-in transceiver (433MHz); Allows to extend the range of wireless communications; Supports all MAGELLAN transmitters; Select which zone, PGM and/or keypad signals are repeated; Signal strength display; 1 programmable 5A relay output; Universal transmitter input (N.O./N.C.); In-field firmware upgrade via 307USB and WinLoad; Wireless range in a typical residential environment: 75m with 433MHz; Compatible with MG5000, MG5050, MG6160, MG6130, MG6250 and RTX3; AC input (16Vac, 20VA); Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel. ACCESSORIES 4.880,00 Paradox Metal Box 20cm X 25.5cm X 7.6cm (8" x 10" x 3"); Provision for multiple 233. module and panel mounting; Many punch-out holes for simple wiring; 813,00 Easy door removal Paradox Metal Box 28cm X 28cm X 7.6cm (11" x11" x 3"); Provision for multiple 234. module and panel mounting; Many punch-out holes for simple wiring; 975,00 Easy door removal 235. Paradox 307USB Direct Connect Interface; Incorporates a USB port and a serial port (DB-9); Enables control panel to communicate with a PC at 60m; Connect from the control panel s serial port connector to a PC s serial (DB-9) or USB port; Includes 3 LED status indicators (PC, Panel and RX/TX); Communication speed: 57.6k baud (MAGELLAN); 38.4k baud (EVO); 9.6k baud (MG series and Spectra SP series) 3.250,00 Paradox 306C - Adapter Cable 236. Magellan/Grafica to 307USB Adapter Cable 320,00 Paradox 4-PGM Expansion Module PGM4 Compatible with E55/E65 (V2.00), MG/SP (V3.00) and EVO ; 4 fully 237. programmable 5A relay outputs ; Deactivate PGM after event and/or 4.152,00 timer ; Pulse PGM output for fire alarms ; In-field firmware upgradeable Paradox 8-Zone Expansion Module ZX8 8-Zone Expansion Module; Compatible with MG Series, SP Series, E 238. Series, and Digiplex EVO; Add 8 zones; 1 PGM output; Use zone input as 4.824,00 an anti-tamper switch input Paradox HUB2 Hub and Bus Isolator ; Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function) ; One 5.530,00 input port, 2 completely isolated output ports ; Each output port provides communications up to 900m 240. Paradox TEMP07 External Temperature Sensor; External temperature sensor used to measure outside temperature to be displayed on the Grafica LCD Keypad 1.940,00 (K07); Connects to the Grafica's Temperature/Zone input; Can be connected up to 30.5m from the Grafica keypad Paradox PCS250G GPRS/GSM Communicator Module The PCS250G GPRS Communicator Module, leverages the GPRS data channel to provide wireless communication solutions for Paradox control panels. It offers reliable and fast communication between properties and their respective monitoring stations, the PCS250G is the vital link that keeps you connected. Using cellular networks, the PCS250G reports to the monitoring station's automation software via GPRS, ensuring that all communication is fast, reliable, and stable. The PCS250G can be used as 6.940,00 a backup to a traditional landline, or as a primary communicator where no landline is available. It also adds remote home control capabilities to a system, allowing you to arm/disarm with a simple text message (SMS). Feel safe by taking control of your system, wherever you are. Report alarms by text messages to up to 16 cellular phone numbers ; Simple installation with 4-wire serial connection ; Tamper switch support ; In GPRS mode, messages are secured with 128-bit (MD5) and 256-bit (AES) encryption 242. Paradox PCS ,00

36 GPRS/GSM Communicator Module; Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software; Report via text message (up to 16 cell phone numbers); Control panel communication supervision; End-user can arm or disarm the system by sending a text message (SMS) to the PCS250; Send prerecorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode); Simple installation with 4-wire serial connection; Optional rod antenna can be installed up to 18m from the module using optional antenna cable extensions depending on the local signal strength; 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode); Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this; Report via GSM (CID, SIA) ALARM SYSTEMS AMC Control panel + keypad S412+K-LCD (with box and power) Total zones: 12, on board: 4 ; Total OC outputs: 6, on board: 3 ; Input expansions(8 inputs/board): 1 ; Output expansions(3 outputs/board): 1 ; radio expansions: 1 ; LCD or LED keyboards: 8 ; Remote key or transponder: 8 ; Independent areas: 4 ; Partial programs per area: 8 ; User codes: 16 ; Storable events: 200 ; Voice event notification: ; Linkable telephone numbers: 16 ; Power supply: 2,5A ; External bell output on-board ; Internal bell output ; Relay output ; Weekly time scheduler ; Rename outputs ; Contact ID integrated modem ; Vocal message sending(with SV/S) ; Editable welcome message Control panel + keypad C24.GSM + K-LCD/VOICE (with box and power) Number of zones: 8 expandable to 24 NC/NO- single EOL resistor-double EOL resistor ; OC outputs: 5 expandable to 18; Areas: 4 separate ; Peripheral: 4 keypads - 4 plugs - remote inputs - remote outputs ; Events memory: 1000 ; Communication: GSM ; Type of communication: local by keypad and PC remote by PC ; Siren outputs: independent internal and external siren, and alarm relay (NC-NO-COM) ; Power: 2,5Ah ; Connect wireless devices is now possible (R series wireless) you can program by LCD keypad, by SMS & by PC thanks to a software you can download from AMC website for free. Pet immunity detector SMILE 18/P Passive infrared detector with snap-on closing (no screws needed). 12 mt. range; 100 X viewing volumetric lens; dual-element pyroelectric sensor. Electro-magnetic noise filter; anti-opening tamper switch and creep zone protection. Detector DT 07 Mouse 07 Dual technology 10.5 GHz digital detector with snap-on closing (no screws needed). Adjustable range (3-15 mt.); 100 lens coverage; dualelement pyroelectric sensor; electromagnetic noise filter; antiopening tamper switch and creep zone protection. AND/OR and AUTOMATIC OR working mode. Pet immunity detector DT 07 PET Mouse07/P Dual technology 10.5 GHz digital pet immunity detector with snap-on closing (no screws needed). Adjustable range (3-15 mt.); 100 lens coverage; dual-element pyroelectric sensor; electromagnetic noise filter; antiopening tamper switch and creep zone protection. AND/OR and AUTOMATIC OR working mode , ,00 580, , , Swivel bracket SN1 Wall mount swivel bracket for sensors SMILE/MOUSE with hole for wires. 54, Infrared detector IF 15/M Passive infrared rays detector with memory, proper to create a curtain s shape protection for doors and windows. N.C. relay s output ; Back Tamper Switch ; Antiopening Tamper Switch ; Signaling LED with relative disabling jumper. Detector s block input when system s OFF(positive B/S clamp); Dedicated relay s output for alarm s signaling when system s OFF(remote buzzer function); Range: 6 m ; Aperture 1.453,00

37 angle: 90 ; Alarm memory ; Alarm relay: 100mA-40V ; RFI protection: 10V/m ; Thermal compensation ; Power supply:13,8vdc ; Max consumption: 25mA ; Cover: ABS Infrared microwave detector DT 15 Passive infrared rays detector with memory, proper to create a curtain s shape protection for doors and windows. N.C. relay s output ; Back Tamper Switch ; Antiopening Tamper Switch ; Signaling LED with relative disabling jumper. Detector s block input when system s OFF(positive B/S clamp); Dedicated relay s output for alarm s signaling when system s OFF(remote buzzer function); Range: 6 m ; Aperture angle: 90 ; Microwave frequency: 2,4GHz ; Alarm relay: 100mA-40V ; RFI protection: 10V/m ; Thermal compensation ; Power supply:13,8vdc ; Max consumption: 25mA ; Cover: ABS Outdoor detector SOUTDOOR SOUTDOOR is an outdoor detector, that can be used for all external installations. It can be programmed by PC software, for these reason it is very efficient and complete for any particular installation (in garden with a lot of plants, animals, sun, and other sources that cause false alarms). Complete programming of all detector s function ; Graphic visualization of each technology coverage ; Possibility of consulting the last events, memorized by detector ; Possibility of configuring the outputs ; Possibility of configuring 4 PRESET working, based on requirements ; Possibility of configuring pre-alarms, using one or more detector s technologies ; Internal memory events, to verify which technology has generated alarm ; Detector with three technologies (2 PIR, 1 microwave) ; Cover with different lens, depending on the type of installation (volumetric, curtain vertical/horizontal) ; PET immunity adjustable with different weight ; Double active anti-blinding to protect PIR ; Anti-masking to protect the Microwave ; Back tamper, and antiopening with microswitch ; Tamper anti-inclination with accelerometer when it is used with bracket ; 3 outputs relé free to be used for alarm functions, masking and blinding ; Input of block detector (exclusion microwave when the system is disarmed) ; Trimmer coverage regulation in the function stand alone Voice messages board SV/S 200 messages linkable to 10 different events + 16 index messages. Onboard plug connection; integrated record mic and speaker. 10 telephone numbers. GSM modem SV/GSM For S and R series. Leave voice calls, SMS, CONTACT ID digital protocols. It can be also used to manage the system remotely via voice calls and SMS. WIRELESS ALARM SYSTEMS AMC Wireless system Bellbox (LCD keypad, volumetric sensor IF400, remote control TR400, magnetic contact CU400, small magnetic contact CM400) Bellbox is a simple and compact wireless alarm system The entire system is contained inside a siren box. It is designed for quick installation in situations such as garages, small business or wherever a quick alarm message is required without the need for a completely and more expensive alarm system. It has a remote control that can be used to activate and deactivate the alarm, activate panic signals and check the event log. The system notifies the user of connection, disconnection, anomalies and low batteries using the flashing light and/or audio signal from the speaker. You can save up to 6 wireless devices of any type (sensors, contacts, inertial switches, smoke sensors, etc.) and 10 remote controls. Programming is very simple; everything is done through selflearning. Relay board M400 M400 is a relay board that shows the status reports of the alarm system Bellbox. In particular, there are: armed / disarmed status, alarm status, stored wireless devices faults (supervision failure and/or battery low) 1.630, , , , , ,00

38 Control panel with keypad R400 (with box, LCD keypad and power) The R series is a 40 devices radio unit; the devices can be memorized and freely linked on 2 different areas. Each area is equipped with 8 partial. The system is able to receive radio signals on the totality of the frequency band 433MHz. 3 channels of simultaneous transmission ; 8 wired inputs on expansion ; 32 users with different operating hierarchies ; up to 3 reception devices (keyboard with receiver or only receiver) ; up to 4 wired keyboards ; freely programmable remote controls ; 3 oc freely programmable outputs expandable to 11 ; PSTN integrated digital communicator ; communicator with voice graft synthesis ; local and remote programming software ; total compatibility with the S series accessories ; 128 bit rolling code signal, digital FSK ; 3 channels of simultaneous transmission Wireless detector IF 400 It s a 15m range infrared wireless detector with more than 100 X angular range thanks to its 31 beam lens. It use a 3 different channels FSK digital radio transmission to avoid signal collisions or band saturation and ensure high stability and precision. The 112 bit Rolling Code guarantee an high security. It s provided with an anti-opening tamper protection. It s also supervised (automatic life test ). The CR2 standard lithium-ions battery allows a very long duration. It has 4 functions ( activated by Dip-Switch) suitable to additionally reduce the device s consumption and increase its autonomy , , WIRELESS ALARM SYSTEM LONGHORN Control panel LHD8001 KIT 16 wireless zone,4 wired zone, can compatible with all kinds of wireless and wired detector ; LCD display, friendly English guidance for operation ; Compatible with communication protocol: ADEMCO 4+1 Contact ID, It can be used by single or net alarm system ; Automatically dial alarm center, user cell phone or fixed telephone with audible alarm while emergencies happen ; Alarm received phones: 1 in alarm center and 5 common telephones ; 7 codes: 1 user code, 1 duress code, 5 operator code ; Wireless code learns restoring and reading function with simple usage ; 5 remote control panel at most ; Arm & disarm using 5 wireless remote controllers on the spot ; Several alarm modes: alarm bell and voice alarm ; Record 40 latest alarm events ; Malfunction alarm: AC power fail, low voltage and telephone line loss ; Set real-time clock inside ; Auto-recording function, record the address of the alarm and other information ; Programmable relay output ; Anti-tamper function of the control panel ; Field monitor function Longhorn Wireless PIR detector LH-938F Detecting Range: 12m; Detecting Angle: 110 ; Battery: 1*6LR61 alkaline cell; Working Voltage: DC9V; Operation Current: 15mA; Static Current: 8uA; Operation Temperature: -10 ~+50 ; Mounting Type: Wall mounted; Mounting Height: 2.2m; Pet Immunity; Pulse Count: 1P or 2P optional; Transmitting Frequency: 433MHZ; Wireless Smoke detector LH-97F Energy-saving, CMOS design ; Manual test & retest function ; High stability ; High Density SMT Design ; Unique structure with dustproof, anti-fly, anti-light design ; Auto reset function ; Power Input: DC 9V(battery) ; Static Current: 30uA ; Alarm Current: 30mA ; Operating temperature: -10 to +50 ; Operating Humidity: 95% RH ; Alarm Output: Radio output ; Detecting Area: 20 Square Meter ; Emission frequency: 315MHZ or 433MHZ Wireless Magnetic contact HO-03W ABS Housing In White ; Alarm output: wireless output ; Transmitting frequency:315mhz/433mhz/868mhz ; Voltage(V DC):12 ; Operating Current(mA): 18 ; Contact mode: COM.N/O,N/C ; Active Gap(mm): , , ,00 846,00

39 262. Wireless Vibro Detector LH-502F Transmitting frequency: 315MHZ/433MHZ ; High stability ; Low power consumption ; Sensibility(4 levels)adjustable ; Transmission range: 100m 1.040, GSM HOME ALARM SYSTEM GSM Alarm burglar system EPIR2 System includes GSM module and Passive InfraRed sensor (PIR sensor) All device is small plastic enclosure and looks like simple PIR motion detector. Enabled object security function will guard your property 24 hours a day and will send SMS message and make a phone call to your mobile upon intrusion. Voice channel option allows user to listen what is happening in secured property with mobile phone. System supports CONTACT ID protocol which is required to send data to monitoring stations. MONITORING STATION ,00 Monitoring Central Station X-GUARD DPC-08/S The DPC-16 is a Multi-Line, Multi-Format Digital Receiver supporting a variety of communicator formats, including all pulse/tone, 4X2 and Contact ID for the ultimate in versatility. Processes most formats on same line card Automatic English translation on printout for 4X2 and Contact ID signals received ; Signals processed simultaneously on all lines ; Two telephone ,00 line inputs, expandable to six ; 4-line x 16-char LCD with blue backlight ; Exclusive power supply eliminates need for cooling fan ; RS232 output for computer connection ; Full supervision of all telephone lines and computer connection ; Min. 24-hour backup power using 7Ah battery ; 1,800-event buffer log with time & date ; Compatible with most Automation softwares ; Expansion card cage available for additional phone lines (max. 16) ROEL X-GUARD DPC-08/S LINE CARD ,00 For two extra lines 266. Software for monitoring Free RADIO FREQUENCY SECURITY SYSTEM INOVA Base Station Radina Mini (Radina mini, UHF FM transceiver, Lightning arrestor, Power supply) Input interface: radio input from radio station ; Bandwidth: 300 to 3400Нz ; Input voltage - 20mV - 2V ; Message standard: KP ; Output interface: USB with driver for two virtual com ports ; Power supply: from USB interface ; USB drivers: Windows XP, Windows Vista 32/64bit, Windows 7 ; 32/64bit, Linux or above ; Filter for duplicate messages: 2.5 minutes ; Maximum number of serviced sites: no limit Parameters for configuration: Device number: from 1 to 99 ; Parity check: Odd, Even ; Filtration by system: 00, 01, 02, 03 ; Backup channel: +4 ; Traffic visualization: All, Filtered Main advantages: Base station RadinaMini is purposed to build a small and light SOT systems up to 2000 sites, with or without up to two repeaters Radina H ; Easy to use interface ; No need of additional and backup power supply ; Work with every monitoring software which support KP standard ; Easy connect of new sites granted by the capability of RadinaMini to show received messages which were filtered Base station Radina B1 Input Interface: 3 radio inputs from radiostations; Bandwidth to 3400 Нz; Input voltage - 20mV - 2V; Message standart KP; Radina B 1 built-in radiostation; Input signal filters; Filter for duplicate messages 2.5 minutes; Back-Up messages selecting; Test messages selecting and counting the number of repeaters which receive them. Output interface: RS 232C 4800,8,1,n for connection with monitoring station; Centrnics Standart Paralel Port for connection with printer; Interfaces for connection with repeaters; 2 built-in wire modems; 2 x RS 232C channels for connection with radio modems Display; LCD 16 rows with 30 symbols; Maximum number of serviced , ,00

40 sites; 5120 for a radio channel; Power supply 220V AC/50Hz or 12V DC/1.2A Base station Radina B2 Input Interface: 2 radio inputs from radiostations; Bandwidth to 3400 Нz; Input voltage - 20mV - 2V; Message standart KP; Radina B2 up to 2 built-in radiostations; Input signal filters; Filter for duplicate messages 2.5 minutes; Back-Up messages selecting; Test messages selecting and counting the number of repeaters which receive them; Output interface: RS 232C 4800,8,1,n for connection with monitoring station; Centrnics Standart Paralel Port for connection with printer; Interfaces for connection with repeaters; 2 built-in wire modems; 2 x RS 232C channels for connection with radio modems Display; LCD 16 rows with 30 symbols; Maximum number of serviced sites; 5120 for a radio channel; Power supply 220V AC/50Hz or 12V DC/1.2A Base station Radina B3 Input Interface: 3 radio inputs from radiostations; Bandwidth to 3400 Нz; Input voltage - 20mV - 2V; Message standart KP; Radina B2 up to 3 built-in radiostations; Input signal filters; Filter for duplicate messages 2.5 minutes; Back-Up messages selecting; Test messages selecting and counting the number of repeaters which receive them; Output interface: RS 232C 4800,8,1,n for connection with monitoring station; Centrnics Standart Paralel Port for connection with printer; Interfaces for connection with repeaters; 2 built-in wire modems; 2 x RS 232C channels for connection with radio modems Display; LCD 16 rows with 30 symbols; Maximum number of serviced sites; 5120 for a radio channel; Power supply; 220V AC/50Hz or 12V DC/1.2A Radio Transmiter Radina U2 UHF radio transmitter Main featres: power supply 12VDC (8,5V to 16V); low power consumption; six digital inputs working with the RF transmitter; configurable working mode for every digital input: normal open, normal close, check for AC voltage from 5V to 20V, deactivated;easy configuration, protected with password. Radio interface: Frequency range from 400MHz to 468MHz; RF Output power 5-6W in the whole RF range; Constant RF output power regardless of the power supply voltage - from 8,5V to 16V; Bandwidth 12,5KHz; One main and up to four back-up frequencies; Capability every digital input separately to be set to transmit on backup RF frequency; Configurable parity check, RF messages repeat count, RF test repeat count, test period and repeat until restore period, usage of a Smart Test to reduce radio transmitting; Capability every digital input separately to be set to re-transmit RF message over a period of time until it is in alarm state. Radio Transmiter Radina V3 VHF radio transmitter Main features: Power supply 12VDC (8,5V to 16V); Low power consumption; Six digital inputs working with the RF transmitter; Configurable working mode for every digital input: Normal Open, Normal Close, Check for AC voltage from 5V to 20V, Deactivated; Easy configuration, protected with password. Radio interface: Frequency range from 136MHz to 174MHz, RF Output power 6-7W in the whole RF range; Constant RF output power regardless of the power supply voltage - from 8,5V to 16V; Bandwidth 12,5KHz; One main and up to four back-up frequencies; Capability every digital input separately to be set to transmit on backup RF frequency; Configurable parity check, RF messages repeat count, RF test repeat count, test period and repeat until restore period, usage of a Smart Test to reduce radio transmitting; Capability every digital input separately to be set to re-transmit RF message over a period of time until it is in alarm state. Programator P , , , , ,00

41 Repeater Radina H1/H2/H3 (Frequencies 1ch,2ch,3ch) Repeater Station And Decoder 274. Repeater main features: Up to 3 radiostations; Bandwidth , depending on the radiostations; Built-in trapper inline lightning arrestor; Radina H - built-in Decoder: Up to 3 radio inputs from radiostations, Bandwidth to 3400 Нz, Input voltage - 20mV - 2V, Message standart KP, Filter for duplicate messages 2.5 minutes, Back-Up , messages selecting. Output interface for connection with base station: Radio interface retransmit on the same radio frequency; Radio interface retransmit on different radio frequency; Built-in wire modem; Ethernet interface for connection through IP-based network (Optional). Maximum number of serviced sites: 5120 for each radio ,00 channel; Power supply: 220V AC/50H or 12V DC/1.2A; Built-in accumulators IP1UART-RS232/IP converter The main function of IP1UART to transmit RS232 data channel using IPnetwork intermediate transmission medium. features: Convenient and easy to use web-an interface for configuring Supply voltage - 12VDC; IP interface - IEEE Ethernet, Fully Compatible with 10/100/1000Base-T Networks; Moving data from INMOD central stations; Moving data from radio repeaters (Radina H) to a base station (Radina B/B2) , Power supply for convertor 1.572, Server TAU Radio-IP-GPRS hybrid security system Main features:server Tau is server software working together with USB device; TauKey and is designed to receive alarm messages by IP and GSM/GPRS communication networks; Supported protocols: Ademco Contact ID; Tau Hybrid Protocol (combines KP LARS and Ademco Contact ID into one flexible and easy to use protocol); Capability to combine monitoring and server stations on one computer; Data processing - encryption, decryption, check of authenticity; Maximum managed security sites (Ademco Contact ID) and/ or 20480(Tau Hybrid Protocol); Check for received test messages from every security site. Generates messages for missing and recovered test; Check for messages from new or preconfigured security sites. Generates alarm messages in those conditions; Redirect accepted messages by IP, GSM/GPRS to virtual serial port on KP LARS or Ademco Contact ID protocol for connection with monitoring software; Buffer for the serial connection with monitoring station. If the serial connection fails last messages (up to 1000) will be buffered and send immediately after reconnection of the serial connection. Visual information for the condition of the buffer; User-friendly interface for working and configuring; Service more than 600 connections in a second; Operating system: Windows XP SP3, Windows Vista x86/x64, Windows 7 x86/x64.inova-bg.com Radina Soft Software for monitoring of received messages from radio base stations. Radina Soft is software for receiving, processing, visualising and storaging data received from security sites. It has easy to use interface for working and processing received messages.features: No limit for the maximum managed security sites and messages received from them; 10 levels of priority of the messages with diffrent color and sound alert; option for change or enter of new event codes;arrange the messages according to their priority; Manual input of events if needed;simultaneously process of events related with one security site; Input from up to 4 serial ports; SQL server which can work from the monitoring station itself or from other computer in the network; Simultaneously work of more than one monitoring station with one SQL Server; Option to search in the database with many different configurations; Storage of detailed information for every security site; Monitoring for failed test messages;visualization of security sites which ,00 Free

42 is armed or disarmed, with missing test messages, unrecovered, with low battery. IP TAU transmitter Power supply 12VDC (8,5V to 16V); Low power consumption ; Capability to use communicator as input-using Ademco Contact ID Protocol ; Six digital inputs working simultaneously with GPRS and/or IP transmitters ; Configurable working mode for every digital input: Normal Open, Normal Close, Check for AC voltage from 5V to 20V, Deactivated ; HTML server for easy configuration and status check, protected with an username and a password ; HTML server for easy configuration without the need of specialized software for programming - using only a web browser ( Internet Explorer,Google Chrome, Firefox etc.); IEEE Ethernet, Fully compatible with 10/100/1000Base- TNetwork ; Static or dynamic IP address compatible with DHCP server ; Capability to use one or two fully independent receiving servers ; Encrypted connection with the server. GPRS TAU L transmitter Main Features: Power supply 12VDC (8,5V to 16V); Low power consumption ; Capability to use communicator as input using Ademco Contact ID protocol ; Five digital inputs fully compatible with Ademco Contact ID Protocol programmable Event Code, Partition and Zone ; Configurable working mode for each digital input: Normal Open, Normal Close, Check for AC voltage from 5V to 20V, Deactivated. GPRS Interface: Capability to use one or two fully independent servers each with main and backup IP/Domain Name address ; Encrypted connection with the servers ; Programmable connection test period range between 1 to seconds ; Capability to enter PIN or PUK code for the SIM card ; Graphical display of the status of the GPRS network; SMS report of the status of the communicator and/or digital inputs to up to 5 mobile numbers ; Capability each digital input separately to be set to transmit SMS report GPRS/IP Transmiter GPRS TAU G2 GPRS and IP transmitter Main features: Power supply 12VDC (8,5V to 16V); Low power consumption; Capability to use communicator as input - using Ademco Contact ID protocol; Six digital inputs working simultaneously with GPRS and/or IP transmitters; Configurable working mode for every digital input: Normal Open, Normal Close, Check for AC voltage from 5V to 20V, Deactivated; HTML server for easy configuration and status check, protected with an username and a password; HTML server for easy configuration without the need of specialized software for programming - using only a web browser ( Internet Explorer, Google Chrome, Firefox etc.); GPRS interface: Capability to use one or two fully independent servers. Additional option to use GPRS only as a backup in case the IP network fails; SMS report of the status of the communicator and/or digital inputs to up to 5 mobile numbers; Capability every digital input separately to be set to transmit SMS report; PGM output controlled by SMS or call; Capability to enter PIN or PUK code for the SIM card; Graphical display of the status of the GPRS network in the web interface; IP interface: IEEE Ethernet, Fully Compatible with 10/100/1000Base-T Networks; Static or dynamic IP address compatible with DHCP server; Capability to use one or two fully independent IP servers; Encrypted connection with IP servers. Anntena ASKI 450 ASKI 450 is a 3 dbd gain, rod-type base station antenna for the MHz Band. ASKI 450 is designed for mounting on supporting tubes with outer diameter between 27 mm and 50 mm The construction of the mount makes it possible to lead the cable either inside or along the outside of the mast tube. The aluminum tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates. This antenna is used where reliability is of great importance. A long lifetime has been taken into consideration when designing this antenna sturdy and strong. Specifications: Type ASKI; Frequency range MHz; Band width 40 MHz; SWR < 1.5; Gain 3 dbd (5.15 dbi); Impedance 50 Ω; Max Power 150 W; Polarization Vertical; Connector N (female); Mechanical: Length 0.65 m; Weight , , , ,00

43 kg; Mounting mm mast tube; Material Radome: aluminium Mounting bracket: epoxy-coated aluminium; Wind Load 150 km/h; Ordering designations: ASKI 450/l MHz, ASKI 450/m MHz, ASKI 450/h MHz Lighting anestor (громобранска заштита) , Cable for anntena 954,00 / m 287. N conector 1.257,00 За поголеми количини цените се предмет на договор. Цените се изразени во денари со пресметан ДДВ. Цените кои се ставени на акција, немаат дополнителен попуст. ДТУ Визард Системи ДООЕЛ го задржува правото на промена на цените без претходна најава.