KNX DEVICES CATALOGUE 2017

Transcription

1 5 YEARS EXCLUSIVELY DEDICATED TO THE KNX STANDARD KNX DEVICES CATALOGUE 20 THE BEST SELECTION OF KNX PRODUCTS

2 Futurasmus, S.L. is not responsible for the accuracy, nor for errors of any nature or omissions regarding the content of this catalogue. All information must be checked upon in our web site or with our technical or commercial staff. Furthermore, Futurasmus, S.L.reserves the right at any time to correct the content of the digital version of this catalogue and in future editions. All logos, images and trade marks belonging to third parts have been used with due regard to the rights of their lawful holders.

3 INDEX 04 KNX POWER SUPPLIES MDT LINGG&JANKE IPAS 06 TP LINE/AREA COUPLERS KNX BUS CABLE MDT LINGG&JANKE APRICUM FABRICANTE CABLE BUS KNX DEVICES CATALOGUE PROGRAMMING DEVICES ARCUS APRICUM IPAS WEINZIERL 0 ACTUATORS IPAS INTERRA LINGG&JANKE MDT 4 UNIVERSAL DIMMING ACTUATORS BES DINUY MDT LINGG&JANKE 6 INPUTS MDT INTERRA LINGG&JANKE ARCUS 8 DETECTORS BES MDT ZUBLIN STEINEL 20 SENSORS ARCUS ELSNER BMS 40 SMART METERING LINGG&JANKE ARCUS 44 VISUALIZATION IPAS IDDERO INTERRA HOUSEINHAND TCI 56 GATEWAYS HVAC, LON, BACNET, MODBUS AND ECEAN INTESIS 58 ROOM CONTROLLERS IDDERO ARCUS ELSNER INTERRA MDT TENSE 62 PUSH BUTTONS MDT LINGG&JANKE EKINEX INTERRA TENSE DAKANIMO GEPRO IDDERO ARCUS ELSNER

4 KNX POWER SUPPLIES LINGG&JANKE 60, 320 and 640mA KNX power supplies, all of them with auxiliary unfiltered output and status LEDs to indicate operation modus: normal, overload or reset. MDT 60, 320, 640, 960 and 280mA KNX power supplies. Note the uninterrupted KNX power supply: thanks to its two independent power supplies, offers high reliability (in case one of them fails). IPAS Very small KNX 640mA power supply (only 3 DIN rail units). It has an auxiliary unfiltered output and 3 status LEDs to indicate operation modus: normal, overload or reset. 04 KNX Devices Catalogue 20 Futurasmus KNX Group

5 KNX POWER SUPPLY Web Code Reference Maximum Current Additional 29VDC Output Supply Voltage Diagnostic Functions Redundant Size Listprice G.D STV mA 60mA 24VDC.5A power supply included 230VAC/50-60HZ 230VAC/50HZ 3U 4U+4U STV mA 230VAC/50HZ 4U STV mA 230VAC/50HZ 4U STC mA 230VAC/50HZ 4U STR mA 230VAC/50HZ 6U STC mA 230VAC/50HZ 6U STC mA 230VAC/50HZ 6U NT mA 0-240VAC/50-60HZ 4U NT mA 0-240VAC/50-60HZ 4U NT mA 0-240VAC/50-60HZ 4U 220 Futurasmus KNX Group KNX Devices Catalogue 20 05

6 TP LINE/AREA COUPLERS KNX BUS CABLE MDT It can be used as either line or area coupler. With status LEDs and manual mode, that can be activated to temporarily modify the configuration of the filter table during the commissioning and diagnosis phase (without having to reprogram the coupler). LINGG&JANKE It can be used as either line or area coupler. With status LEDs to test the proper operation of the coupler. APRICUM It can be used as either line or area coupler. With status LED and manual mode, that can be activated to temporarily modify the configuration of the filter table during the commissioning and diagnosis phase (without having to reprogram the coupler). BUS CABLE MANUFACTURER: Single pair (red/black) or two pairs KNX bus cable (red/black and yellow/white) with halogen free or PVC sheath. Also available with 50V insulation. 06 KNX Devices Catalogue 20 Futurasmus KNX Group

7 TP LINE/AREA COUPLERS Web Code Reference Manual control Size Listprice G.D SCN-LK00.0 2U U MECtp Interface 2U KNX BUS CABLE Web Code Reference Pairs Type 50V insulation Listprice G.D cblh HALOGEN FREE cblh50 HALOGEN FREE cb2lh 2 HALOGEN FREE cb2lh50 2 HALOGEN FREE 98.8 Futurasmus KNX Group KNX Devices Catalogue 20 0

8 PROGRAMMING DEVICES ARCUS This router has both the functionality of KNXnet/IP Routing and KNXnet/IP Tunnelling connection. We can highlight the following features: group monitor via HTML, bus monitor, NTP time server, data logging in SD card and possibility to generate charts with the registered data, SSL to secure SSH/SFTP, etc. APRICUM The USB programmer facilitates the bidirectional communication between the PC and the KNX TP bus. This devices stands out for its great price quality ratio. IPAS Both the KNX IP programmer (NCI) and the IP Router are equipped with an integrated web server for diagnostic functions (to show sent and received telegrams, connections used, etc.); up to 5 simuntaneous Tunnelling KNXnet/IP connections and KNXnet/IP Object Server connection are allowed. WEINZIERL Let us single out the USB programmer in stick format and also the DIN rail version, sized only Unit. Also, their product range includes an RS.232 programmer and gateways with KNXnet/IP Routing or KNXnet/IP Tunnelling y Object Server functionality. 08 KNX Devices Catalogue 20 Futurasmus KNX Group

9 PROGRAMMING DEVICES Web Code Reference Interface Router IP Advanced Functions Size Listprice G.D IP 2U UIM-KNX 42 USB 2U IP 2U IP 2U RS-232 U USB U USB Stick IP 2U IP 2U IP- WLAN 25x6x3mm 480 Futurasmus KNX Group KNX Devices Catalogue 20 09

10 ACTUATORS IPAS This manufacturer offers 2 ranges of multi function actuators: the μbricks, specially designed for decentralized systems (since they can be installed in electric cabinets or mounted on DIN rail) and the PowerBlocks, for DIN rail mounted, centralized systems. Very advanced application program, including logic, timers, blocking functions, etc. INTERRA Complete range of multi function actuators for DIN rail mounting in centralized systems. Apart from allowing control of 230VAC blinds/shutters and ON/OFF functions, they include fan coil and 24VDC blind/shutter control. LINGG&JANKE The ECO+ actuator range for DIN rail mounting in centralized systems has now been improved and includes manual control for the same prize. MDT Complete actuator range both for DIN rain mounting and installation in wall boxes. As it happens with the rest of MDT devices, buttons for manual control have been improved. The same as all the MDT products, they have a 3 year warranty. 0 KNX Devices Catalogue 20 Futurasmus KNX Group

11 ACTUATORS Web Code Reference Multi function Outputs On/Off* Blind* Fan Coil* I(A) C Load Channelsper Phase Measureme NT Inputs Size Listprice G.D U/Flush mount xNo / 2x40μF 2 6 4U/Flush mount U/Flush mount µF 4U xNo / 4x40μF 2 4U/Flush mount µF 4U/Flush mount U ITR504-6A μF 6U 50 2 ITR508-6A μF 6U ITR52-6A μF 0U ITR56-6A μF 0U ITR520-6A μF 5U ITR524-6A μF 5U A2F6H-E μF 3U J2F6H-E U A4F6H-E μF 4U J4F6H-E U BEA4FK6H-E µF 6U BEA4F230H-E µF 4 x 230VAC 6U A6F6H-E µF 6U 4 43 J6F6H-E U BEA8FK6H-E µF 8 9U BEA8F230H-E µF 8 x 230VAC 9U A9F6H-E µF 9U J2x6F6H-E U JAL-0UP Wall box AZI μF Power 4U JAL U 238 These columns indicate the maximum number of each function. The functions in multifunction actuators are combinable. Example: A multifunction actuator with 4 outputs can be used for (4 x On / Off) or (2 x Shutters) or ( x Shutter and 2 x On / Off). Futurasmus KNX Group KNX Devices Catalogue 20

12 ACTUATORS Web Code Reference Multi function Outputs On/Off* Blind* Fan Coil* I(A) C Load Channelsper Phase Measureme NT Inputs Size Listprice G.D. 65 JAL-040D VDC 2 4U AZI μF Power 8U AKS μF 6U AKI μF 8U AMS μF Current 8U AMI μF Current 8U JAL U JAL-080D VDC 2 8U AKS μF 8U AKI μF 2U AMS μF Current 2U AMI μF Current 2U AKS μF 2U AMI μF Current 2U AKS μF 2U 552 These columns indicate the maximum number of each function. The functions in multifunction actuators are combinable. Example: A multifunction actuator with 4 outputs can be used for (4 x On / Off) or (2 x Shutters) or ( x Shutter and 2 x On / Off). 2 KNX Devices Catalogue 20 Futurasmus KNX Group

13 Futurasmus KNX Group is currently selling to over 60 countries in the world We have offices in Spain, Germany, Southern Africa, Middle East and China.. Futurasmus KNX GROUP ESPAÑA C/ de la Nit., Bloque, Local 030 Mutxamel (Alicante) T: F: E: Futurasmus GmbH KNX GROUP Audifaxstr. 535 Radolfzell GERMANY T: F: E: Futurasmus KNX GROUP CHINA Room -503 No.3a Beiyuan Road Chaoyang Disctrict Beijing P. R. CHINA T: E: info@futurasmus-knxgroup.cn Futurasmus KNX GROUP BAHRAIN P.O.Box 5 Manama Al Rossais Tower Off. 2 Bl. 283 Rd 04 Dipl. Area 3 BAHRAIN T: F: E: info@futurasmus-me.com Futurasmus KNX GROUP SOUTH AFRICA 86 Marine Drive Paarden Eiland 405 Cape Town (W-Cape) SOUTH AFRICA T: +2 (0) E: info@futurasmus-knxgroup.co.za Futurasmus KNX Group KNX Devices Catalogue 20 3

14 UNIVERSAL DIMMING ACTUATORS BES For dimming incandescent, halogen (standard or electronic transformer), low consumption lamps. A special range designed for optimal LED regulation at 230VAC and avoid the blinking derived from dimming is available. DINUY For dimming incandescent, halogen (standard or electronic transformer), low consumption lamps and LED at 230VAC (with great dimming quality). MDT For dimming incandescent, halogen (standard or electronic transformer), low consumption lamps and LED at 230VAC with only 4W (minimum consumption needed for operation). A different version is also available for 0 V ballasts. LINGG&JANKE For dimming incandescent, halogen (standard or electronic transformer) and low consumption lamps. Their catalogue includes a dimmer specially designed for the regulation of LED lamps at 230VAC, which allows for a more precise dimming through selectors. 4 KNX Devices Catalogue 20 Futurasmus KNX Group

15 UNIVERSAL DIMMING ACTUATORS Web Code Reference No. Of Channels I(A) Load Type Size Listprice G.D RKLED W Universal/LED 4U RK W Universal 4U RKLED W Universal/LED 4U RK W Universal 4U RKLED2x W Universal/LED 4U RK3X W Universal 4U RE KNT W Universal/LED 5U AKD W Universal 4U AKD W Universal 4U AKD W Universal 8U AKD W Universal 8U DIM2FU-IP-OH 2 50W Universal 6U DIM4FU300-IP-OH 4 300W Universal 2U DIM4FU-2-FW 4 50W Universal 2U 565 DIMMING ACTUATORS 0V Web Code Reference No. Of Channels Ax. Ecg Load Type Size Listprice G.D RE KNT V 5U 208, AKD V 4U 290 LED DIMMER ACTUATORS Web Code Reference No. Of Channels I(A) Load Type Size Relays Listprice G.D. 462 RGBL-K 3 3A LED, Voltaje constante 2/24VDC x35xmm RGBWL-K 4 3A LED, Voltaje constante 2/24VDC x35xmm AKD-0224V.0 2 3A LED, Voltaje constante 2/24VDC 46x25x3mm AKD-0324V.0 3 3A LED, Voltaje constante 2/24VDC 46x25x3mm AKD-0424V.0 4 4A/8A LED, Voltaje constante 2/24VDC 4U AKD-0424R.0 4 3A LED, Voltaje constante 2/24VDC 46x25x3mm 28 5 Futurasmus KNX Group KNX Devices Catalogue 20 5

16 INPUTS MDT INTERRA Complete range of potential free inputs for DIN rail or in wall mounting, as well as 230VAC, 2 24VDC, 24VAC or analogue 0 2V/2 0V, 0 20mA/4 20mA inputs. Push button interface with 2, 4 or 6 inputs and great quality price ratio. LINGG&JANKE Extensive selection of potential free inputs for DIN rail or in wall mounting, as well as 230VAC, 8 48VDC inputs. Moreover, their catalogue includes a push button interface that gives great value for money. ARCUS Analogue input for flush mounting that includes two 0 2VDC inputs. 6 KNX Devices Catalogue 20 Futurasmus KNX Group

17 INPUTS Web Code Reference No. Of Inputs Type Size Listprice G.D. 939 BE Universal push button interface 4x4x2mm BE Universal push button interface 4x4x2mm BE Universal push button interface 4x4x2mm BE Potential free 2U BE Potential free 4U BE Potential free 8U BE VDC / 24VAC 2U BE VDC / 24VAC 4U BE VDC / 24VAC 8U BE VAC 4x4x2mm BE VAC 2U BE VAC 4U BE VAC 8U AIO-020V.0 2 Analogue 0 2V/2 0V, 0 20mA/4 20mA 4x4x2mm AIO-040V.0 4 Analogue 0 2V/2 0V, 0 20mA/4 20mA 4x4x2mm ITR02 2 Universal push button interface 40x40x0mm 45 9 ITR04 4 Universal push button interface 40x40x0mm ITR06 6 Universal push button interface 40x40x0mm TS4F-2-U 4 Universal push button interface 4x4x2mm TS8F-2-U 8 Universal push button interface 4x4x2mm BE9FK 9 Potential free 6U BE9F VDC 6U BE9F VAC 6U SK08-AN2 2 Analogue 0 2V 5x65x55mm 69 Futurasmus KNX Group KNX Devices Catalogue 20

18 DETECTORS BES This brand offers a series of infra red presence detectors, which stand out for being very small for ceiling installation. On top of that, they include a radio frequency detector for concealed mounting. MDT Infra red detectors for fitted installation in ceilings or wall mounting. Let us highlight their detector finished in glass. All their detectors are equipped with brightness sensor. ZUBLIN STEINEL Infra red detectors for fitted installation in ceilings or walls, or else flush mounting. All their detectors are equipped with brightness sensor. Among their main detectors, it is worth mentioning their IP45 outdoors detector, as well as their high frequency detector (specially designed for installation in corridors). 8 KNX Devices Catalogue 20 Futurasmus KNX Group

19 DETECTORS Web Code Reference Sensor Type Detection Range (X m. Height) Brightness Sensor Constant Regulation IP Rating Mounting Finishing Size Colour Listprice G.D pyroelectric Mov. Ø5m a 2,5m IP20 Flush mount, ceiling Plastic Ø36mm White pyroelectric Mov. Ø5m a 2,5m IP20 Flush mount, ceiling Plastic Ø36mm White Radio frequency Mov. 2 x 6m a 2,5m IP20 Hidden Plastic - Blue SCN-P360D.0 pyroelectric (Mov. Ø6m, Presen. Ø4m) a 3m IP20 Flush mount, wall Plastic Ø43mm White SCN-BWM pyroelectric (Mov. 6-0m) a,m IP20 Flush mount, wall Glass 92x92x32mm White SCN-BWM55.G 2 pyroelectric (Mov. 6-0m) a,m IP20 Flush mount, wall Glass 92x92x32mm White SCN-P360K3.0 3 pyroelectric (Mov. Øm, Presen. Ø5m) a 3m IP20 Flush mount, wall Plastic 5x5x35mm White SCN-P360D3.0 3 pyroelectric (Mov. Øm, Presen. Ø5m) a 3m IP20 Flush mount, wall Plastic 5x5x35mm White SCN-G360K3.0 3 pyroelectric (Mov. Øm, Presen. Ø5m) a 3m IP20 Flush mount, wall Glass 92x92x32mm White SCN-G360D3.0 3 pyroelectric (Mov. Øm, Presen. Ø5m) a 3m IP20 Flush mount, wall Glass 92x92x32mm White SCN-P360K4.0 4 pyroelectric (Mov. Ø6m, Presen. Ø8m) a 3m IP20 Flush mount, wall Plastic 85x85x38mm White SCN-P360D4.0 4 pyroelectric (Mov. Ø6m, Presen. Ø8m) a 3m IP20 Flush mount, wall Plastic 85x85x38mm White pyroelectric (Mov. 4x5m) a 3m IP20 Flush mount, wall Plastic Ø44mm White pyroelectric (Mov. Ø4m, Presen. Ø6m) a 3m IP20 Flush mount, wall Plastic Ø05mm White pyroelectric (Mov. Ø4m, Presen. Ø6m) a 3m IP20 Flush mount, wall Plastic 86x86mm White pyroelectric (Mov. Ø26m, Presen. Øm) a 3m IP20 Flush mount, wall Plastic Ø05mm White pyroelectric (Mov. Ø26m, Presen. Øm) a 3m IP20 Flush mount, wall Plastic 86x86mm White pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP20 Flush mount, wall Plastic 80x80x32mm White pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Flush mount, wall Plastic 86x86x43mm White pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Flush mount, wall Plastic 86x86x43mm Black pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Flush mount, wall Plastic 86x86x43mm Grey pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Surface, wall Plastic 86x86x84mm White pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Surface, wall Plastic 86x86x84mm Black pyroelectric (Mov. Ø6m, Presen. Ø2m) a,m IP55 Surface, wall Plastic 86x86x84mm Grey pyroelectric (Mov. Ø20m ) a 2m IP54 Surface, wall Plastic 4x4x28 mm White 200, pyroelectric (Mov. Ø20m ) a 2m IP54 Surface, wall Plastic 4x4x28 mm Black 200, pyroelectric (Mov. Ø20m ) a 2m IP54 Surface, wall Plastic 4x4x28 mm Silver 200, pyroelectric (Presen. 4x4m) a 2,8m IP20 Flush mount, ceiling Plastic xx60mm White 200, High frequency (Presen. 3x0m) a 2,8m IP20 Flush mount, ceiling Plastic 20x20x5mm White 26,39 Futurasmus KNX Group KNX Devices Catalogue 20 9

20 SENSORS T-Objekt-UP Temperature sensor for flush mount blind cover Elsner Temperature measurement 4 configurable temperature thresholds. PI thermostat for cooling and heating, PI or 2 point regulation for additional cooling and additional heating. For flush mount installation, hidden under blind cover. Measuring range: º C Web code Reference SK03-T Temperature sensor, flush mount Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostats for cooling and heating Fits 55x55mm frames. Measuring range: º C Web code Reference Colour White Black KNX T-UP Temperature sensor, flush mount, with optional push buttons and display Elsner Temperature measurement 3 configurable temperature thresholds. PI thermostat for cooling and heating, PI or 2 point regulation for additional cooling and additional heating. 2 PI (%) value comparators to calculate average and maximum or minimum values of up to 5 inputs. The models fitted with display can show up to 3 information lines. The models fitted with push buttons allow manual set point temperature changes. Fits 55x55mm frames. Measuring range: º C Web code Reference Display Buttons Colour White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel SK30-TC Temperature sensor, flush mount, with push buttons or rotary control Temperature measurement Setting of temperature limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Measuring range: º C Web code Reference Display Buttons Colour White Aluminium Anthracite Stainless Steel White Aluminium 20 KNX Devices Catalogue 20 Futurasmus KNX Group

21 SENSORS SK02-T Temperature sensor, surface mount KNX T-AP Temperature sensor IP65 with probe Elsner Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostats for cooling and heating Measuring range: º C Web code Reference SK0-T Temperature sensor IP65 without probe Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostats for cooling and heating Analogue input for PT000 probe. Protection rating IP65. Web code Reference Temperature measurement 4 configurable temperature thresholds. PI thermostat for cooling and heating, PI or 2 point regulation for additional cooling and additional heating. For flush mount installation, hidden under blind cover. Measuring range: º C Web code Reference SK08-T8 Controller for 8 PT000 temperature probes, IP65 8 analogue inputs for PT000 temperature probes (not included). For each input: Temperature measurement Upper and lower temperature thresholds. 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC Protection rating IP65 SK0-T-ATF2 Temperature sensor IP65 with probe Web code Reference Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostats for cooling and heating Measuring range: º C Protection rating IP65. Web code Reference SK0-TC-6B Controller for PT000 temperature probe, IP20 Temperature measurement (PT000 temperature probe not included) Setting of temperature limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects 6 potential free, binary inputs to configure as needed Measuring range: ºC Web code Reference Futurasmus KNX Group KNX Devices Catalogue 20 2

22 SENSORS SK0-T-OTFF IP65 temperature sensor with square contact probe for flat surfaces SK0-T-ALTF2 IP65 temperature sensor with contact probe for pipes and ducts Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Measuring range: º C Protection rating IP65. Web code Reference Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Measuring range: º C Protection rating IP65. Web code Reference SK0-T-HTF IP65 Temperature sensor with stainless steel V4A immersion probe SK0-T-ESTF IP65 Temperature sensor with probe within steel V4A screw in immersion stem Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Protection rating IP65. Web code Reference Measure r. IP probe Probe cable m C 65 PVC C 65 Silicone C 68 Teflon SK0-T-ALTF IP65 temperature sensor with axial contact probe for pipes and ducts Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Protection rating IP65. Web code Reference Measure r. Probe cable m C PVC C Silicone Temperature measurement Upper temperature threshold Sending of minimum and maximum registered temperature values. 2 point, PI and PWM thermostat for cooling and heating. With Ø 8 mm screw in, V4A steel probe that supports up to 40 bars Protection rating IP65. Web code Reference Measure r. Probe cable m. Probe size C PVC G/2", 50mm C PVC G/2", 00mm C Silicone G/2", 50mm C Silicone G/2", 00mm SK0-T-ETF IP65 Temperature sensor with probe within brass screw in mmersion stem Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. 22 KNX Devices Catalogue 20 Futurasmus KNX Group

23 SENSORS With Ø 8 mm screw in, V4A steel probe that supports up to 40 bars Protection rating IP65 SK0-T-ETF3 IP65 Temperature sensor with extended probe within steel V4A screw in immersion stem Web code Reference Probe size G/2", 50mm G/2", 00mm G/2", 50mm G/2", 200mm G/2", 250mm G/2", 300mm G/2", 400mm SK0-T-ETF2 IP65 Temperature sensor with probe within steel V4A screw in immersion stem Temperature measurement Upper temperature threshold Sending of minimum and maximum registered temperature values. 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC With Ø 8 mm screw in, V4A steel probe that supports up to 40 bars Protection rating IP65. Web code Reference Probe size G/2", 50mm G/2", 00mm G/2", 50mm G/2", 200mm G/2", 250mm G/2", 300mm G/2", 400mm Temperature measurement Upper temperature threshold Sending of minimum and maximum registered temperature values. 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC With Ø 8 mm screw in, V4A steel probe that supports up to 40 bars Protection rating IP65. Web code Reference Probe size G/2", 50mm G/2", 00mm G/2", 50mm G/2", 200mm G/2", 250mm G/2", 300mm G/2", 400mm SK0-T-ETF IP65 Temperature sensor with quick temperature response probe within immersion stem Temperature measurement Upper temperature threshold Sending of minimum and maximum registered temperature values. 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC Neck tube probe with quick response for measuring temperature in places with major temperature fluctuations in short periods of time. Protection rating IP65. Web code Reference Probe size G/2", 00mm G/2", 50mm G/2", 250mm Futurasmus KNX Group KNX Devices Catalogue 20 23

24 SENSORS SK0-T-KTF IP65 temperature sensor with probe for air ducts SK0-T-RPTF2 IP65 temperature sensor with pendulum black globe probe Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC Protection rating IP65. Web code Reference Probe size G/2", 50mm G/2", 00mm G/2", 50mm G/2", 200mm G/2", 250mm G/2", 300mm G/2", 400mm SK0-T-RPTF IP65 temperature sensor with pendulum room probe Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Measuring range: 30.+5ºC Protection rating IP65. Web code Reference Temperature measurement Upper temperature threshold 2 point, PI and PWM thermostat for cooling and heating. Measuring range: ºC Protection rating IP65. Web code Reference SK30-TC-VOC Temperature and VOC (volatile organic compounds) sensor, fitted mount, with push buttonsor rotary control Temperature and VOC measurement Setting of temperature limits 2 point, PI and PWM thermostat Ventilation control according to the VOC values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC VOC measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey 24 KNX Devices Catalogue 20 Futurasmus KNX Group

25 SENSORS SK30-TC-CO2 Temperature and CO2 sensor, flush mount, with push buttons or rotary control KNX TH-UP Temperature and humidity sensor, flush mount, with optional push buttons and display Temperature and CO2 measurement Setting of temperature limits 2 point, PI and PWM thermostat Ventilation control according to the CO2 values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC CO2 measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey SK03-TFK Temperature and humidity sensor, flush mount Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point regulation of relative humidity Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 90% Measurement of temperature, relative humidity, absolute humidity and dew point 4 configurable temperature thresholds. 2 configurable humidity thresholds. Dew point threshold. Sending of minimum and maximum registered temperature values. Sending of minimum and maximum registered humidity values. PI thermostat for cooling and heating, and 2 point regulation for additional cooling and additional heating. PI regulation for humidification and dehumidification. The models fitted with display can show up to 3 information lines. The models fitted with push buttons allow manual set point temperature changes. Fits 55x55mm frames. Temperature measuring range: º C Humidity measuring range: % Web code Reference Display Buttons Colour White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel Web code Reference Colour White Black Futurasmus KNX Group KNX Devices Catalogue 20 25

26 SENSORS Neo-TC Temperature and humidity sensor, flush-mount SK02-TFK Temperature and humidity sensor, surface mount Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative and absolute humidity thresholds. Sending of minimum and maximum registered temperature values. Binary inputs + Additional functions Temperature measuring range: C Protection rating IP65. Aluminum enclosure Web code Reference Colour Squared, brushed aluminum Squared, brushed black aluminum Rounded, brushed aluminum Rounded, brushed black aluminum SK30-THC Temperature and humidity sensor, flush mount, with push buttons or rotary control Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Setting of temperature and humidity limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 95% Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm Sending of minimum and maximum registered temperature values. 2 point thermostat for relative humidity Temperature measuring range: ºC Humidity measuring range: 0 90% Web code Reference Cala KNX TH Temperature and humidity sensor, flush mount, with display Elsner Measurement of temperature, relative and absolute humidity Upper and lower relative temperature thresholds. Receiving and processing data from the KNX bus 4 analogic/digital inputs + Additional functions Temperature measuring range: C Protection rating: IP20 For 55x55mm frames installations Web code Reference Colour Black White Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey 26 KNX Devices Catalogue 20 Futurasmus KNX Group

27 SENSORS SK0-TFK-AFF IP65 Temperature and humidity sensor with probe Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point thermostat for relative humidity Temperature measuring range: ºC Humidity measuring range: 0 90% Protection rating IP65. Web code Reference TH65-AP IP65 Temperature and humidity sensor with probe Elsner Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy 4 configurable temperature thresholds. 2 configurable humidity thresholds. Dew point threshold Sending of minimum and maximum registered humidity values. PI thermostat for cooling and heating, PI or 2 point regulation for additional cooling and additional heating. PI regulation for humidification and dehumidification. Temperature measuring range: ºC Humidity measuring range: 0 00% Protection rating IP65. Web code Reference SK0-TFK-RPFF IP65 temperature and humidity sensor with pendulum room probe Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point thermostat for relative humidity Temperature measuring range: ºC Humidity measuring range: 0 00% Protection rating IP65. Web code Reference Protection against Dust Dust and condensation SK0-TFK-KFF IP65 temperature and humidity sensor with probe for air ducts Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point thermostat for relative humidity Temperature measuring range: ºC Humidity measuring range: 0 90% Protection rating IP65. Web code Reference Futurasmus KNX Group KNX Devices Catalogue 20 2

28 SENSORS SK0-THC-4B Controller for SHT temperature and humidity probe, IP20 Temperature and humidity measurement Setting of temperature and humidity limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects 4 potential free, binary inputs to configure as needed Inputs for SHT temperature and humidity probe (not included) Measuring range: ºC Humidity measuring range: % Web code Reference SK30-THC-VOC Temperature, humidity and VOC (volatile organic compounds) sensor, fitted mount, with push buttons or rotary control Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and VOC Setting of temperature and VOC limits 2 point, PI and PWM thermostat Ventilation control according to the VOC values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 +95% VOC measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey SK30-THC-CO2 Temperature, humidity and CO2 sensor, flush mount, with push buttons or rotary control Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and CO2 Setting of temperature and CO2 limits 2 point, PI and PWM thermostat Ventilation control according to the CO2 values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 +95% CO2 measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey SK03-TTFK Temperature and humidity sensor with probe and input for additional PT000 probe, flushmount Measurement of temperature, temperature of the additional PT000 probe (not included), relative humidity, absolute humidity, dew point and enthalpy. Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point regulation of relative humidity According to the temperature of the additional PT000 probe (not included): 28 KNX Devices Catalogue 20 Futurasmus KNX Group

29 SENSORS 2 point thermostat for heating; or 2 point regulation of the dew temperature. Temperature measuring range: ºC Humidity measuring range: 0..95% Web code Reference Colour White Black SK0-TTHC-4B Controller for SHT temperature and humidity probe, IP20 and input for PT000 probe, fitted mount Temperature and humidity measurement Sending of minimum/maximum registered temperature values. Termostato 2 puntos, PI y PWM Setpoint temp. variation via front buttons and/or communication objects 4 potential free, binary inputs to configure as needed According to the temperature of the additional PT000 probe (not included) Temperature measuring range: ºC Humidity measuring range: 0 +95% Web code Reference SK30-TTHC Temperature and humidity sensor, fitted - mount, with push buttons or rotary control and input for control rotativo Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper and lower temperature limits setting up Envío del valor mínimo y máximo de temperatura registrados 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication 2 potential free, binary inputs to configure as needed According to the temperature of the additional PT000 probe (not included) Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0..95% Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey SK30-TTHC-VOC Temperature, humidity and VOC (volatile organic compounds) sensor and input for PT000 probe, fitted mount, with push buttons or rotary control Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and VOC Setting of temperature and VOC limits Sending of minimum and maximum registered temperature values. 2 point, PI and PWM thermostat Ventilation control according to the VOC values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 +95% VOC measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey Futurasmus KNX Group KNX Devices Catalogue 20 29

30 SENSORS SK30-TTHC-CO2 Sensor de temperatura, humedad, CO2 y entrada para sonda PT000, instalación empotrada, con botones o control rotativo SK0-TTFK-AFF IP65 Temperature and humidity sensor with probe and input for additional PT000 probe Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and CO2 Setting of temperature and CO2 limits 2 point, PI and PWM thermostat Ventilation control according to the CO2 values Setpoint temp. variation via front buttons and/or communication objects 2 potential free, binary inputs to configure as needed Input for additional PT000 temperature probe Status LED Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: 0 +95% CO2 measuring range: ppm Web code Reference Buttons Rotary control Colour White Dark grey White Dark grey White Dark grey Measurement of temperature, temperature of the additional PT000 probe (not included), relative humidity, absolute humidity, dew point and enthalpy. Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point regulation of relative humidity According to the temperature of the additional PT000 probe (not included): 2 point thermostat for heating; or 2 point regulation of the dew temperature. Temperature measuring range: ºC Humidity measuring range: 0..90% Protection rating IP65. Web code Reference SK0-TTFK-RPFF IP65 Temperature and humidity sensor with pendulum room probe and input for additional PT000 probe Measurement of temperature, temperature of the additional PT000 probe (not included), relative humidity, absolute humidity, dew point and enthalpy. Upper temperature threshold Upper and lower relative humidity thresholds. Dew point alarm 2 point, PI and PWM thermostat for cooling and heating. 2 point regulation of relative humidity According to the temperature of the additional PT000 probe (not included): 2 point thermostat for heating; or 2 point regulation of the dew temperature. Temperature measuring range: ºC Humidity measuring range: 0..00% Protection rating IP65. Web code Reference Protection against Dust Dust and condensation 30 KNX Devices Catalogue 20 Futurasmus KNX Group

31 SENSORS KNX AQS CO2 sensor, flush mount, with optional push buttons and display Elsner Web code Reference Colour Anthracite Stainless Steel Measurement of CO2 4 configurable CO2 thresholds. Sending of maximum registered CO2 value 2 stages CO2 PI regulation 2 PI (%) value comparators to calculate average and maximum or minimum values of up to 5 inputs The models fitted with display can show up to 3 information lines. The models fitted with push buttons allow their fee configuration for either switching, regulating, shutter/blinds, scenes, etc. Fits 55x55mm frames. CO2 measuring range: ppm Web code Reference Display Buttons Colour White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel KNX VOC-UP VOC (volatile organic compounds) mixed gas sensor, flush mount Elsner VOC measurement 4 configurable VOC thresholds Sending of maximum registered VOC value 2 stages VOC PI regulation 2 PI (%) value comparators to calculate average and maximum or minimum values of up to 5 inputs Fits 55x55mm frames. VOC measuring range: ppm Additional 2 24V DC power supply required. Web code Reference Colour White Aluminium KNX AQS/TH-UP Temperature, humidity and CO2 sensor, flush mount, with optional push buttons and display Elsner Measurement of temperature, relative humidity, absolute humidity, dew point and CO2. 3 configurable temperature thresholds. 2 configurable humidity thresholds. 4 configurable CO2 thresholds. Dew point threshold. Sending of minimum and maximum registered temperature values. Sending of minimum and maximum registered humidity values. Sending of maximum registered CO2 value. PI thermostat for cooling and heating, and 2 point regulation for additional cooling and additional heating. PI regulation for humidification and dehumidification. 2 stages CO2 PI regulation 2 PI (%) value comparators to calculate average and maximum or minimum values of up to 5 inputs. The models fitted with display can show up to 3 information lines. The models fitted with push buttons allow manual set point temperature changes. They can also be configured for switching, regulation, shutter/blinds, scenes, etc. Fits 55x55mm frames. Temperature measuring range: ºC Humidity measuring range: % CO2 measuring range: ppm Web code Reference Display Buttons Colour White Aluminium Anthracite Stainless Steel White Aluminium Anthracite Stainless Steel Futurasmus KNX Group KNX Devices Catalogue 20 3

32 SENSORS Neo-TC-CO2 Temperature, humidity and CO2 sensor, flush-mount Cala KNX AQS/TH Temperature, humidity and CO2 sensor, flush mount, with display Elsner Measurement of temperature, relative humidity, absolute humidity, dew point and enthalpy Upper temperature threshold Sending of maximum registered CO2 value. Upper and lower relative and absolute humidity thresholds. Sending of minimum and maximum registered temperature values. Binary inputs + Additional functions Temperature measuring range: C Protection rating IP65. Aluminum enclosure Measurement of temperature, relative and absolute humidity and CO2 Upper and lower relative temperature thresholds. Sending of minimum and maximum registered temperature values. Measurement CO2 range: 0 to 2000 ppm Receiving and processing data from the KNX bus 4 analogic/digital inputs + Additional functions Temperature measuring range: C Protection rating: IP20 For 55x55mm frames installations Web code Reference Colour Square, brushed aluminum Square, brushed black aluminum Rounded, brushed aluminum Rounded, brushed black aluminum Web code Reference Colour Black White 32 KNX Devices Catalogue 20 Futurasmus KNX Group

33 SENSORS SEWI KNX Multi function sensor Elsner Quadra Weather Station BMS Sensor range for measuring temperature and/or humidity and/or brightness (in 3 directions) and/or atmospheric pressure and/or CO2 Configurable thresholds. Installation in ceiling Web code Reference Movement Temperature Humidity Brightness At. pressure CO SALVA KNX Fire detector Smoke and/or fire detector Audio signal 9V battery for voltage failure included Temperature measuring range: 0 +50ºC Humidity measuring range: % PI thermostat for cooling and heating, and 2 point regulation for additional cooling andadditional heating (advanced function). PI regulation for humidification and dehumidification (advanced function). Elsner Measurement of temperature, wind, wind direction, brightness (independent values for north, east, south, west and skywards), global radiation (independent values for north, east, south, west and skywards), twilight and precipitation. Sun position calculation. Advanced functions via sun areas, weekly schedules and the analysis of the registered values. Protection rating IPX4. Additional 2 28V DC power supply required. Web code Reference 350 Quadra SUNTRACER KNX BASIC Weather Station Measurement of temperature, wind, brightness, twilight and precipitation. 4 configurable temperature thresholds. 3 configurable wind thresholds. 3 configurable brightness thresholds. 3 configurable twilight thresholds. Sending of maximum registered wind value. Protection rating IP44. Additional power supply required. Web code Reference Additional power supply VAC VDC (20VAC) Elsner Web code Reference Smoke Fire Temperature Humidity Advanced functions SUNTRACER KNX GPS-LIGHT Weather Station with integrated GPS receiver Elsner Measurement of temperature, wind, brightness, twilight and precipitation. Obtains the position, date and current time from the GPS signal. Sun position calculation. 4 configurable temperature thresholds. 3 configurable wind thresholds. 3 configurable brightness thresholds. Futurasmus KNX Group KNX Devices Catalogue 20 33

34 SENSORS 3 configurable twilight thresholds. 5 configurable sun areas. Sending of maximum registered wind value. Weekly and annual time switches. Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. Web code Reference Additional power supply V DC (2 28V AC) SUNTRACER KNX-GPS Elsner Weather Station with integrated GPS receiver and facade control Measurement of temperature, wind, brightness, twilight and precipitation. Obtains the position, date and current time from the GPS signal. Sun position calculation. 4 configurable temperature thresholds. 3 configurable wind thresholds. 3 configurable brightness thresholds. 3 configurable twilight thresholds. Sending of maximum registered wind value. Weekly and annual time switches. Automatic control of up to 6 independent façades. Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. Web code Reference SUNTRACER KNX SL LIGHT Elsner Weather Station with integrated GPS receiver and facade control Measurement of temperature, wind, brightness, twilight and precipitation. Obtains the position, date and current time from the GPS signal. Sun position calculation. Configurable thresholds. Weekly and annual time switches. Automatic control of up to 5 independent façades. Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. Web code Reference SUNTRACER KNX SL Elsner Weather Station with integrated GPS receiver and facade control Measurement of temperature, wind, brightness, twilight, precipitation and atmospheric pressure. Obtains the position, date and current time from the GPS signal. Sun position calculation. Configurable thresholds. Weekly and annual time switches. Automatic control of up to 8 independent façades. Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. Web code Reference SUNTRACER KNX SL BASIC Weather Station Elsner SK0-GPS-TC Elsner Temperature and brightness sensor with integrated GPS receiver, IP65 Measurement of temperature, wind, brightness (in 3 directions), twilight and precipitation. Configurable thresholds. Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. Web code Reference Temperature and humidity measurement Obtains the position, date and current time from the GPS signal. Astronomic time. Time switch. Protection rating IP65. Web code Reference KNX Devices Catalogue 20 Futurasmus KNX Group

35 SENSORS SK0L-TC-L Brightness sensor and input for additional PT000 temperature probe, IP65 Brightmess measurement Setting of temperature limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects Input for PT000 temperature probe Temperature measuring range: ºC Brightness measuring range: lux Web code Reference SK0L-THC-L-AFF Temperature, humidity and brightness sensor, IP65 Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and brightness Setting of temperature and humidity limits 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects Input for PT000 temperature probe Temperature measuring range: ºC Brightness measuring range: lux 2 point, PI and PWM thermostat Setpoint temp. variation via front buttons and/or communication objects Input for PT000 temperature probe Temperature measuring range: ºC Humidity measuring range: 0 +95ºC Brightness measuring range: lux Web code Reference KNX SENSOR Weather sensor Elsner Sensor range for measuring wind and/or precipitation and/or brightness 3 configurable thresholds Sending of maximum registered wind value. Protection rating IP44. Additional power supply required. Web code Reference Wind Precip. Bright. Add.power supply VAC VDC (20VAC) VAC VDC (20VAC) VAC VDC (20VAC) VAC VDC (20VAC) Web code Reference Vari KNX Weather sensor Elsner SK0L-TTHC-L-AFF Temperature, humidity and brightness sensor and input for PT000 temperature probe, IP65 Measurement of temperature, relative humidity, absolute humidity, dew point, enthalpy and brightness Setting of temperature and humidity limits Sensor range for measuring temperature and/or humidity and/or brightness (in 3 directions) and/or atmospheric pressure and/or GPS. Configurable thresholds. Protection rating IP44. Web code Reference Temperature Humidity Brightness Atmosph. press. GPS Futurasmus KNX Group KNX Devices Catalogue 20 35

36 SENSORS Web code Reference Temperature Humidity Brightness Atmosph. press. GPS KNX PY Global radiation sensor, IP44 Measurement of global radiation value 4 configurable global radiation thresholds. Sending of maximum registered global radiation value. Measurement range of global radiation: W/m2 Protection rating IP44. Elsner KNX SENSOR SL Weather sensor Elsner Web code Reference Sensor range for measuring wind and/or precipitation and/or brightness Protection rating IP44. Additional 2 40V DC (2 28V AC) power supply required. SK08-BFT-WMT Soil temperature and moisture sensor, IP65 Elsner Web code Reference Wind Precipitation Brightness SK08-GLBS-MES Global radiation sensor, IP65 Measurement of global radiation level Upper and lower global radiation thresholds. 2 point, PI and PWM global radiation regulation. Global radiation probe included Measurement range of global radiation: W/m2 Spectral range: nm Protection rating IP65. Web code Reference Measurement of soil temperature, soil moisture (in hpa), relative humidity, absolute humidity and dew point. Upper and lower temperature thresholds. Upper and lower soil moisture thresholds. Upper and lower relative humidity thresholds. Upper and lower absolute humidity thresholds. Upper and lower dew point thresholds. 2 point, PI and PWM thermostat. 2 point, PI and PWM soil moisture regulation. 2 point, PI and PWM relative humidity regulation. Soil temperature and humidity probe included. The model that supports an additional PT000 probe (not included), also measures that probe's temperature; upper and lower threshold and 2 point, PI and PWM regulation. Measurement range of soil temperature: º C Measurement range of soil moisture: 2000 hpa/mbar, Pa Protection rating IP65. Web code Reference Additional temperature probe accepted KNX Devices Catalogue 20 Futurasmus KNX Group

37 SENSORS KNX I4-ERD Soil temperature and moisture sensor Elsner Additional 9 2V DC power supply required (included). Up to 4 probes accepted (not included) For each input: Temperature and relative humidity measurement 2 configurable temperature thresholds. 2 configurable humidity thresholds. Sending of minimum and maximum registered temperature values. Sending of minimum and maximum registered humidity values. Additional 230V AC power supply required. Size: 6 DIN mod. Web code Reference Installation IP rating Measuring range Size Surface 65 0,5 2,5 m DIN rail 20 0,5 2,5 m 2 units Surface 65 0,5 6 m DIN rail 20 0,5 6m 2 units SO250 basic Ultrasonic fill level sensor (depth gauge) Elsner Web code Reference KNX TH-ERD Probe for soil temperature and moisture sensor KNX I4 ERD Elsner Measurement of the fill level (in litre, m3 or %) or fill hight (in m) or distance to fill level (in m) 5 configurable thresholds in cm, litres, m3 or %. Measuring range: cm Size: 3 DIN mod. Web code Reference Protection rating IP68. Web code Reference X-S8-F Ultrasonic fill level sensor (depth gauge) Measurement of the fill level (in litre or m3), fill hight (in m, dm, cm or mm), distance to fill level (in m, dm, cm or mm) and fill percentage Upper and lower fill level thresholds Upper and lower fill hight thresholds Upper and lower distance to fill level thresholds Upper and lower fill percentage thresholds 2 point fill level regulation 2 point fill hight regulation 2 point distance to fill level regulation 2 point fill percentage regulation Protection rating IP65. SO250 Ultrasonic fill level sensor (depth gauge) Measurement of the fill level (in litre, m3 or %) or fill hight (in m) or distance to fill level (in m) 5 configurable thresholds in cm, litres, m3 or %. 2 relays that can be configured via own display and push buttons. Measuring range: cm Additional 230V AC power supply required. Size: DIN mod. Web code Reference Elsner Futurasmus KNX Group KNX Devices Catalogue 20 3

38 SENSORS SK08-WAQ-MES Water Quality Sensor IP65 Measurement of ph level, ORP (redox/reduction potential) and water temperature. Run hour counter. Upper and lower ph thresholds. Upper and lower ORP thresholds. Upper and lower temperature thresholds. Upper and lower run hour thresholds (as electrode calibration alert). 2 point, PI and PWM ph regulation. 2 point, PI and PWM ORP regulation. Both electrodes included. Temperature measuring range: º C Protection rating IP65. Web code Reference KNX Devices Catalogue 20 Futurasmus KNX Group

39 5Th Anniversary as a KNX wholesaler and KNX++ training centre Futurasmus KNX Group KNX Devices Catalogue 20 39

40 ENERGY COUNTERS WATER COUNTERS LINGG&JANKE They deliver real energy (kwh and Wh), power (W), current (A), voltage (V) and power factor values. Available for three phase and single phase measurement, as well as for direct measurement or via toroidal transformer. Additional invoicing functionality, resettable relative counters, etc. LINGG&JANKE ARCUS They deliver water consumption values, as well as more advanced functions, such as thresholds, relative counters, etc. Available with different nominal diameters and flows. Feel free to ask our commercial staff for special sized counters. 40 KNX Devices Catalogue 20 Futurasmus KNX Group

41 ENERGY COUNTERS Web Code Reference Nr. Of Phases Measurement Max. Current Per Phase Toroidal Transformer Required Quadrants Size Listprice G.D Direct 5A 5U Indirect - /A o /5A 5U Direct 5A 4 5U Indirect - /A o /5A 4 5U Direct 32A 3U 24,5 WATER COUNTERS Web Code Reference Nominal Flow DN Diametre Length Max. Water Temperature Listprice G.D ,5 m3/h,5 m3/h,5 m3/h,5 m3/h 2,5 m3/h 2,5 m3/h 2,5 m3/h 2,5 m3/h 6 m3/h 6 m3/h G3/4" G3/4" G3/4" G3/4" G" G" G" G" G-/4" G-/4" 80mm 0mm 80mm 0mm 30mm 90mm 30mm 90mm 260mm 260mm 40 C 40 C 90 C 90 C 40 C 40 C 90 C 90 C 40 C 90 C m3/h 40 G2" 300mm 40 C m3/h 40 G2" 300mm 90 C ,5 m3/h 5 G3/4" 80mm 30 C 94, ,5 m3/h 5 G3/4" 0mm 30 C 94, ,5 m3/h 5 G3/4" 80mm 90 C ,5 m3/h 5 G3/4" 0mm 90 C ,5 m3/h 20 G" 30mm 30 C 95, ,5 m3/h 20 G" 30mm 90 C 9 5 Futurasmus KNX Group KNX Devices Catalogue 20 4

42 CALORIES/FREEZERIES COUNTERS GAS COUNTERS LINGG&JANKE ARCUS The counters deliver thermal energy values, whereas the Lingg&Janke counters deliver both thermal energy and cooling values. Both devices include advanced functions. Feel free to ask our commercial staff for special sized counters. LINGG&JANKE They deliver the accumulated gas consumption in m3 and litre; with advanced functions, such as relative counters, invoicing, etc. Feel free to ask our commercial staff for special sized counters. 42 KNX Devices Catalogue 20 Futurasmus KNX Group

43 CALORIES/FREEZERIES COUNTERS Web Code Reference Nominal Flow DN Diametre Length Probe Listprice G.D ,6 m3/h,5 m3/h,5 m3/h 0,6 m3/h,5 m3/h,5 m3/h 0,6 m3/h,5 m3/h 2,5 m3/h 3,5 m3/h G3/4" G3/4" G3/4" G" G" G" G" G" G" G5/4" 0mm 0mm 65mm 30mm 30mm 65mm 90mm 90mm 90mm 260mm Dry Dry Dry Dry Dry Dry Dry Dry Dry Dry m3/h 25 G5/4" 260mm Dry m3/h 40 G2" 300mm Dry ,6 m3/h 5 G3/4" 0mm Dry 284, ,6 m3/h 5 G3/4" 0mm Humid 284, ,5 m3/h 5 G3/4" 0mm Dry 284, ,5 m3/h 5 G3/4" 0mm Humid 284, ,5 m3/h 20 G" 30mm Dry 289, ,5 m3/h 20 G" 30mm Humid 289,2 5 GAS COUNTERS Web Code Reference Nominal Flow DN Adapter Listprice G.D ,04-6 m3/h 25 Single ,04-6 m3/h 20 Double ,04-6 m3/h 25 Double ,06-0 m3/h 32 Double ,0-6 m3/h 40 Double ,6-25 m3/h 40 Double ,25-40 m3/h 50 Double 04 Futurasmus KNX Group KNX Devices Catalogue 20 43

44 VISUALIZATION CBSE ComBridge Studio Evolution Ipas Visualization software pre installed in an industrial embedded Linux PC. Also available as a virtual machine. Available in different hardware versions to match the requirements of any type of installation: from small homes to offices, hotels, airports (SCADA like/bms), etc. Flash based web visualization for PCs or touch displays Fully customizable user interface: background, icons, text, colours, charts, frames, resolution, etc. Browsing based on desktops, windows, pages and gadgets Exporting of HTML pages for smart phones and tablets User rights and management It allows simultaneous connection to different independent installations from one visualization A KNXnet/IP Tunnelling or KNXnet/IP Object Server gateway is required to connect each installation Unlimited group addresses Weekly and annual time scheduler Scenes allow the introduction of delays between actions Alarm notification in the visualization Sending of alarms via e mail Logic module with graphic editor, including logic gates, timers, arithmetic operations, comparators, etc. Data logger Customizable charts Basic energy monitoring (for a full metering solution, the Smart Metering module is needed) DALI module for the visualization and maintenance of systems equipped with DALI gateways (by IPAS) Alarms with SMS notification via VoIP systems and even push notifications in IOS/Android (using third party software) Management modules for BACnet, Modbus and OPC gateways Data export and remote back ups Remote management of systems that are independent from each other. Each one controls its own scenes, alarms, etc. (with additional license) Virtual data points based on historic data. Access to historic data via SQL commands License for 3 users included License for gateway included 2V DC power supply required (PSU included). Web Code Reference Version Server Server Avanced Server Avanced Racksystem 44 KNX Devices Catalogue 20 Futurasmus KNX Group

45 VISUALIZATION CBSE CBSE extension modules Ipas Web Code Reference Description additional users additional gateways Smart Metering module (up to 5 counters) additional counters Modbus module (up to 5 devices) additional Modbus devices BACnet module (up to 5 devices) additional BACnet devices Report module Data base management module DALI management module additional DALI gateways Futurasmus KNX Group KNX Devices Catalogue 20 45

46 VISUALIZATION HCC HomeControl Center Ipas The web server integrated in the device hosts the HTML visualization. No plug ins, like flash or java, needed, which makes it compatible with any web browser of any device in the market (PC, smart phone, tablet, etc.) 3 different visualizations in HTML:. Totally customizable visualization 2. Visualization adapted for SMART PHONE format 3. Visualization adapted for TABLET format Fully customizable user interface: background, icons, text, colours, frames, resolution, etc. Smart Visu: special visualization mode for smart phones based on icons; it automatically adapts to any given resolution. 250 communication objects and also 000 group addresses that are independent from the former. Chart module with up to 0 series per chart, with or without data interpolation and polling function with read requests to the bus. Possibility to send data via e mail in XML format by means of an event from the KNX bus. Monitoring module to register and save data from communication objects and group addresses. Configurable as blacklist and whitelist. Possibility to send data via e mail in XML format by means of a telegram event from the KNX bus. TCP/UDP Commands module, for sending commands to IP devices with events from the KNX bus. Compatible with PJLink protocol for the control of film projectors. Acoustic alarms and sending of s with the alarms log as an attachment. Annual and weekly time scheduler, that can be edited by the final user. Real time clock with NTP timer server synchronization, that can be used as KNX date/time master. Logic module with graphic editor, including logic gates, timers, arithmetic operations, comparators, etc. Scenes allow the introduction of delays between actions Alarm notification in the visualization. Sending of alarms via e mail KNXnet/IP Tunnelling functionality: allows using the device as an IP programmer for the ETS. Integrated BCU Additional power supply required: 2 30VDC Size: 4 DIN mod. Web Code Reference KNX Devices Catalogue 20 Futurasmus KNX Group

47 VISUALIZATION HCi-KNX 5." Touch Display with integrated web server Iddero Touch displays with simple and user friendly visualization and control interface. Its hardware has been designed to achieve maximum reliability and a fast performance without delays. 5." TFT LED Colour touch display Integrated web server to replicate the display's visualization in HTML format, compatible with any device (PC, tablet, smart phone, etc.) Thermostat functionality (external temperature probe required) Its user interface has been completely redesigned to ensure an innovative and fresh appearance, optimizing previous looks Including a renewed set of over 230 icons Graphic navigation via customizable sensitive areas (i.e, on floor plans) Scenes editable by final users, including the introduction of delays between actions Weekly time switches with annual periods Alarm monitoring with historical data Presence simulation with day/night timetable Logic functions (logic gates, comparators, time switches, arithmetic calculations, etc.) E mail notifications on KNX events KNX time master to send date/time to the bus Compatible with the idderocloud service for remote access Integrated BCU 2V DC power supply required (PSU included). Web Code Reference Colour of the frame 32 DW-HCi-KNX-G Grey 33 DW-HCi-KNX-W White 34 DW-HCi-KNX-B Matt black 35 DW-HCi-KNX-A Anodized aluminium Futurasmus KNX Group KNX Devices Catalogue 20 4

48 VISUALIZATION HC2-KNX " Touch Display with integrated web server Iddero In addition to the functionality of the 5," HC KNX version, it has: " TFT LED Colour panoramic touch display Integration of IP cameras* Video door communication function, with full duplex audio and echo cancellation*. * Please, check compatibility with our commercial staff Web Code Reference Colour of the frame 0043 DW-HC2-KNX-G Grey 64 DW-HC2-KNX-G White 63 DW-HC2-KNX-B Matt black 0044 DW-HC2-KNX-A Anodized aluminium 48 KNX Devices Catalogue 20 Futurasmus KNX Group

49 VISUALIZATION HC2L-KNX 0" Touch Display with integrated web server Iddero In addition to the functionality of the 5," HC KNX version, it has: 0" TFT LED Colour panoramic touch display Integration of IP cameras* Video door communication function, with full duplex audio and echo cancellation*. * Please, check compatibility with our commercial staff Web Code Reference Colour of the frame 035 DW-HC2L-KNX-G Grey 66 DW-HC2L-KNX-W White 65 DW-HC2L-KNX-B Matt black 6 DW-HC2L-KNX-A Anodized aluminium Futurasmus KNX Group KNX Devices Catalogue 20 49

50 VISUALIZATION DW-GSM GSM expansion module for Iddero devices Iddero KNX system control and status alarms via SMS messaging and missed calls Connection to a HCi KNX, HC2 KNX, HC2L KNX touch display or Iddero Home Server required Remote scene execution Control of the devices integrated in the KNX installation Status request via messaging "Missed call" functionality to avoid costs on most frequent actions 2 V DC power supply required. Size: 6 DIN mod. Web Code Reference 9592 DW-GSM 50 KNX Devices Catalogue 20 Futurasmus KNX Group

51 VISUALIZATION SER-KNX Iddero Home Server Iddero Same HTML visualization as in the HCi KNX, HC2 KNX y HC2L KNX touch display's web servers Integrated web server with visualization in HTML format, compatible with any device (PC, tablet, smart phone, etc.) 8 free configurable binary inputs, 4 of which can also be used to connect temperature probes Thermostat functionality (external temperature probe required) Its user interface has been completely redesigned to ensure an innovative and fresh appearance, optimizing previous looks Including a renewed set of over 230 icons Graphic navigation via customizable sensitive areas (i.e, on floor plans) Scenes editable by final users, including the introduction of delays between actions Weekly time switches with annual periods Alarm monitoring with historical data Presence simulation with day/night timetable Logic functions (logic gates, comparators, time switches, arithmetic calculations, etc.) E mail notifications on KNX events KNX time master to send date/time to the bus Compatible with the idderocloud service for remote access Ethernet connection Integrated BCU 2V DC power supply required (PSU included) Size: 6 DIN mod. Web Code Reference 3 DW-SER-KNX Futurasmus KNX Group KNX Devices Catalogue 20 5

52 VISUALIZATION TR " Touch Display with integrated web server Interra Touch display with exceptional design and wide functionality for home control. " LCD colour touch display Mobile APP available for ios and Android to acquire the full configuration of the display via reading of QR codes Alarm monitoring with historical data Caretaker services, traffic information, wheather news, RSS news, etc. Integration of IP cameras* Thanks to its camera, microphone and two speakers, it can also be used as indoor intercom system. Video door communication function* Several frames available (black aluminium, black acrylic, stailess steel)* 2 V DC power supply required. * Please, check compatibility with our commercial staff Web Code Reference 440 ITR KNX Devices Catalogue 20 Futurasmus KNX Group

53 VISUALIZATION ITR " Touch Display with integrated web server Interra Touch display with exceptional design and wide functionality for home control. 0." LCD colour touch display Mobile APP available for ios and Android to acquire the full configuration of the display via reading of QR codes Alarm monitoring with historical data Caretaker services, traffic information, wheather news, RSS news, etc. Integration of IP cameras* Thanks to its camera, microphone and two speakers, it can also be used as indoor intercom system. Video door communication function* Several frames available (black aluminium, black acrylic, stailess steel)* 2 V DC power supply required. * Please, check compatibility with our commercial staff Web Code Reference 304 ITR Futurasmus KNX Group KNX Devices Catalogue 20 53

54 VISUALIZATION HOUSEINHAND HOUSEINHAND Licenses Houseinhand App for smart phones and tables, available both for ios and Android. Simple and clear user interface, very easy to use Customizable backgrounds Scenes (the final user might create new scenes from the App itself) Video door communication function compatible with TCS system, from Jung Integration of IP cameras* Integration of IRTrans and Global Cache KNXnet/IP Tunnelling gateway required for KNX connection * Please, check compatibility with our commercial staff Web Code Reference Description 3285 HIH2_BP BASIC license for 2 devices 3286 HIH2_PP PREMIUM license for an unlimited number of devices 328 HIH2_UB2P BASIC to PREMIUM license upgrade 54 KNX Devices Catalogue 20 Futurasmus KNX Group

55 VISUALIZATION Luna6 Kit 6" Capacitive multitouch display for home automation applications TCI Touch display with embedded PC for the installation of any visualization and control software 6 TFT multitouch display, colour, 366x68 AMD Fusion Dual Core 2x.0GHz 2 GB RAM Speaker and hands free microphone SSD hard drive Ethernet RS 232 USB Windows 0 Mounting box included 24V DC power supply required (PSU included) * Contact our commercial staff for different type of mounting or size Web Code Reference 58 luna6 Futurasmus KNX Group KNX Devices Catalogue 20 55

56 GATEWAYS HVAC, LON, BACNET, MODBUS AND ECEAN Device Web Code For ME AC KNX V2 824 Mitsubishi Electric A.A. ME-AC-KNX-i 095 Mitsubishi Heavy ME-AC-KNX-5/00 94 / 95 Mitsubishi Electric A.C. DK-AC-KNX- 955 Daikin A.C. DK-AC-KNX-i 0952 Daikin A.C. DK-RC-KNX Daikin A.C. DK-RC-KNX-i Daikin A.C. (SKY and VRV ranges) PA-AC-KNX-64/28 2/22 Panasonic VRF A.C. (Domestic line / Industries (City Multi) (Domestic line) (Domestic line) (SKY and VRV ranges) (CZ CFUNC2) External Power Features Mr.Slim / City Multi) Not required Bidirectional A.C. (FD, KX6, KXR6) Not required Bidirectional 9 tu 24V DC or 24V AC Bidirectional Virtual temperature Not required Bidirectional Virtual temperature Not required Bidirectional Not required Bidirectional Not required Bidirectional 9 to 24V DC or 24V AC Bidirectional Full control Virtual temperature Control and status Control and status Control and status Control and status Capacity A.C. indoor unit 4 binary inputs A.C. indoor unit 5, 00 indoor A.C. indoor unit 4 binary inputs A.C. indoor unit A.C. indoor unit 4 binary inputs A.C. indoor unit 64,28 indoor Communication KNX TP KNX TP CN05/ KNX TP CN05/ A.C. units KNX TP G 50A/GB 50A/ KNX TP KNX TP KNX TP Bus P/P2 KNX TP Bus P/P2 A.C. units KNX TP EIA485 to Size CN92 A.C. interior unit 59 x 36 x 2 mm CN92 A.C. indoor unit 59 x 45 x 2 mm AG 50A/ GB 50ADA 6 DIN mod. S2 A.C. indoor unit 59 x 36 x 2 mm S2 A.C. indoor unit 59 x 45 x 2 mm A.C. indoor unit x x 2 mm A.C. indoor unit x x 2 mm adapter CZ CFUNC2 6 DIN mod. Device Web Code For PA-AC-KNX-i 0482 Panasonic A.C. PA-RC-KNX-i 0953 Panasonic VRF A.C. DK-AC-KNX-i 0952 Panasonic A.C. PA-RC2-KNX-i 296 Panasonic A.C. PA-AW-KNX- 392 Panasonic A.W. AK-AC-KNX-4/8/6/64 24 / 25 / 26 / 2 Arçelik A.C* LG-AC-KNX-4/8/6/ / 0484 / 999 / 9920 LG A.C.* LG-RC-KNX-i 588 LG A.C. (Etherea range) (FS, FSM) (ECOi, PACi) (ECOi, PACi) (Aquarea) (Commercial & MultiV) External Power Features Not required Bidirectional Control and status Not required Bidirectional Control and status Not required Bidirectional Control and status Not required Bidirectional Control and status Not required Bidirectional Full control 9 to 24V DC or 24V AC Bidirectional Full control 9 to 24V DC or 24V AC Bidirectional Full control Not required Bidirectional Control and status 4 binary inputs 4 binary inputs 4 binary inputs 4 binary inputs 4 binary inputs Capacity Communication Size A.C. indoor unit KNX TP CN CNT A.C. indoor unit 59 x 45 x 2 mm A.C. indoor unit KNX TP Bus A/B A.C. indoor unit x x 2 mm A.C. indoor unit KNX TP Bus R/R2 A.C. indoor unit x x 2 mm A.C. indoor unit KNX TP BUS A/B A.C. indoor unit x x 2 mm A.C. indoor unit KNX TP cable for the A.W. indoor units 0 x 00 x 28 mm 4,8,6,64 indoor A.C. units KNX TP Arçelik EIA485 (PMNFP4A or PHNFP4A0) 6 DIN mod. 4,8,6,64 indoor A.C. units KNX TP LG EIA485 (PMNFP4A or PHNFP4A0) 6 DIN mod. A.C. indoor unit KNX TP Bus BYR A.C. Indoor units x x 2 mm 56 KNX Devices Catalogue 20 Futurasmus KNX Group

57 GATEWAYS HVAC, LON, BACNET, MODBUS AND ECEAN Device Web Code For MD-AC-KNX-B/6/64 258/259/260 Midea A.C. FJ-RC-KNX-i 28 Fujitsu A.C* SM-AC-KNX-4/8/6/64/ / 0486 / 992 / 9922 Samsung A.C* HI-AW-KNX- 29 Hitachi A.W. TO-RC-KNX-i 349 Toshiba A.C. TO-AC-KNX-6/ / 354 Toshiba A.C. MH-RC-KNX-i 68 Mitsubishi Heavy MH-AC-KNX-48/28 69 / 0 Mitsubishi Heavy (VRF line) (Yutaki series) (Digital & VRF line) (VRF line) Indrustries Industries A.C. External Power Features Not required Bidirectional Not required Bidirectional 9 to 24V DC or 24V AC Bidirectional 29V DC, 6mA Bidirectional Not required Bidirectional 00 to 240V AC (50/60Hz) Bidirectional A.C. (FD, KX6, KXR6) Not required Bidirectional (Superlink l&ii) 9 to 24V DC or 24V AC Bidirectional Control and status Control and status Full control Control and status Control and status Control and status Control and status Virtual temperature Capacity,6,64 indoor 4 binary inputs A.C. indoor unit 4,8,6,64,28 A.W. indoor unit A.C. indoor unit 6,64 indoor 4 binary inputs A.C. indoor unit 48, 28 indoor Communication A.C. units KNX TP Bus EXY KNX TP RWB Bus A.C. indoor units KNX TP Samsung EIA485 KNX TP KNX TP Bus A/B A.C. A.C. units KNX TP KNX TP Bus X/Y A.C. units KNX TP Size A.C. indoor unit 59 x 36 x 2 mm A.C. indoor units x x 2 mm (MIM B04A, MIM B3x) 6 DIN mod. Hitachi H Link x x 2 mm A.C. Indoor units x x 2 mm Bus TCC LINK x x 2 mm A.C. indoor unit x x 2 mm Bus VRF (Superlink I&II) 25 x 0 x 65 mm Device Web Code For IBOX-KNX-MBRTU 8999 / 92 / 93 Modbus RTU Master IBOX-KNX-MBTCP 908 / 909 / 90 Modbus TCP Master IBOX-KNX-BAC 048 / 9 / 90 BACnet/IP Client SM-ACN-KNX-4/8/6/64 25/6454/444/445 Samsung VRV Nasa IBOX-KNX-E-A/C 0489/0490 EnOcean IBOX-KNX-LON 0035 / 8389 / 840 LON IBOX-KNX-AIRZONE 9 Airzone IS-IR-KNX- 443 Multiple Contact us for more information External Power Features 9 to 24V DC or 24V AC Bidirectional 9 to 24V DC or 24V AC Bidirectional 9 to 24V DC or 24V AC Bidirectional 9 to 24V DC or 24V AC Bidirectional Not required Bidirectional internal LCD 9 to 24V DC or 24V AC Bidirectional 9 to 24V DC or 24V AC Bidirectional Not required Control via Full control Full control Full control Full control Multiple EEP s Full control Full control IR codes Capacity Communication 00, 500 or 3000 points KNX TP Modbus EIA232 or EIA485 00, 500 or 3000 points KNX TP Modbus Ethernet 00, 500 or 4000 points KNX TP BACnet IP (Ethernet) 4/8/6/64 indoor A.C. units KNX TP EIA485 MIM N0 or 32 channels / 5 devices per channel KNX TP EnOcean (wireless) 00, 500 or 4000 points KNX TP LON TP/FT 0 4CS y 32 zones per system KNX TP AIRZONE EIA485 A.C. indoor unit KNX TP IR codes emitter Size 6 DIN mod. 6 DIN mod. 6 DIN mod. R/R2 connector 5 DIN mod. Freq. 868MHz, 35MHz 0 x 00 x 28 mm 6 DIN mod. 6 DIN mod. x x 2 mm Futurasmus KNX Group KNX Devices Catalogue 20 5

58 ROOM CONTROLLERS VERSO Iddero 4.3" Touch Display with integrated BCU and 2 independent thermostats Stylish and compact sized room controller with crystal front, suitable for all types of environments and decoration. Capacitive colour Touch Display 4,3''' 48 functions that can be freely arranged among 6 control pages Additional favourites page, that allows the final user to select up to 8 functions Different colour themes available and possibility to customize background images Time schedules, alarm monitoring, internal scenes controller Two independent 2 point, PI and PWM thermostats for cooling, heating, additional cooling and additional heating Integrated temperature probe 4 multifunction inputs Integrated BCU Additional 2 30V DC power supply required Web Code Reference Colour of the frame Aluminium White Black Corlo Touch 3.5" Touch Display with integrated BCU and thermostat Elsner Colour Touch Display 3,5''' Proximity sensor Brightness sensor PI thermostat for cooling and heating, PI or 2 point regulation for additional cooling and additional heating. 4 potential free binary inputs available; they can be connected to temperature sensors. Engraved text inscriptions or customized logos available, with RGB backlighting * Fits Corlo frame range. Integrated BCU Additional 2 24V DC power supply required. Web Code Reference Colour of the frame 329 DW-VERSO-W Blanco 330 DW-VERSO-B Black Touch IT Smart 3.5" Touch Display with integrated BCU and thermostat * Please, contact our commercial staff Web Code Reference Colour Brilliant black White brilliant Matt black Matt white Colour Touch Display 3,5''' Manufactured in aluminium 48 functions that can be freely arranged among 6 control pages 2 point, PI and PWM thermostat for cooling, heating, additional cooling and additional heating. Integrated temperature probe Alarm management module with acoustic signal Weekly time schedules that can be edited by the end user Line and bar graphs (microsd required) Log of KNX telegrams (microsd required) Integrated BCU Additional 9 32V DC power supply required. Corlo Touch WL 3.5" Touch Display with integrated BCU and thermostat In addition to the Corlo Touch functionality, also: Integrated WiFi Integration of IP cameras* Web page display Remote control from smart phones and tablets * Please, check compatibility with our commercial staff Elsner 58 KNX Devices Catalogue 20 Futurasmus KNX Group

59 ROOM CONTROLLERS Web Code Reference Colour Brilliant black White brilliant Matt black Matt white Corlo Touch KNX 5IN (WL) Touch Display 5 integrated BCU and thermostat Elsner 5 "touch color display Proximity sensor Brightness sensor Thermostat PI for cold and heat and PI or 2 points for additional cold and additional heat. 4 free potential binary inputs suitable for temperature probes. 5 automatic channels, ventilation, shading, climate control and light. Controller of 6 scenes Time switches, alarm clock WiFi Interface (WL model only) Web browser (WL model only) IP cameras display (WL model only) * Allows remote control from Smartphone and Tablets (WL model only) * Check compatibility Web Code Reference WiFi Add.Functions Colour No No Black Yes Yes Black Imini 6.5" Touch Display with integrated BCU and thermostat Colour Touch Display 6,5''' Thanks to its camera, microphone and speaker, it can also be used as intercom system Temperature sensor Brightness sensor 2 IR sensors (infrared) Integrated BCU vadditional 2V DC power supply required Web Code Reference 44 ITR SCN-RTG Thermostat with integrated BCU and LCD Interra MDT Glass capacitive thermostat, black or white 4 sensitive areas: 2 for the thermostat and 2 for free configuration 2 point, PI and PWM thermostat for cooling, heating and additional heating. Integrated BCU Web Code Reference Colour 4800 SCN-RTGW.0 White 499 SCN-RTGS.0 Black SCN-LCDG Thermostat with integrated BCU and LCD MDT Glass capacitive thermostat, black or white 4 sensitive areas. 20 freely configurable functions via LCD. 2 point, PI and PWM thermostat for cooling, heating and additional heating. Integrated BCU Web Code Reference Colour 496 SCN-LCDGW.0 White 498 SCN-LCDGS.0 Black Futurasmus KNX Group KNX Devices Catalogue 20 59

60 Futurasmus KNX Group, multi brand wholesaler of KNX devices. ABB DINUY HOUSEINHAND SIEMENS ALTENBURGER DURA-TECH IDDERO SOS APRICUM E-KEY INTERRA STEINEL ARCUS EGI INTESIS TCI B + B EISSOUND IPAS TENSE B.E.G. EKINEX ISE THEBEN BAB TEC ELSNER JR-SECURITY VIATRON BERKER ECEAN JUNG VIVEROO BES ESYLUX LINGG&JANKE WEINZIERL BILTON FIELDSERVER MDT WHD BLEUCOMMAZUR GEPRO MEAN WELL WOERTZ BMS GIRA MERTEN ZENNIO BUSCH-JAEGER GLOBALCHIP MOXA ZUBLIN CABLE BUS HAGER NEEDO CJC SYSTEMS HELIOS OPTERNUS DAKANIMO HIGHDOM ROBIN 60 KNX Devices Catalogue 20 Futurasmus KNX Group

61 Futurasmus KNX Test Lab Test Lab accredited by the KNXA to do the conformity and interoperability tests of the application programs of new KNX devices. Consulting and training for new developers. Futurasmus KNX Group KNX Devices Catalogue 20 6

62 PUSH BUTTONS MDT BE-TA MDT BE-TG 62 KNX Devices Catalogue 20 Futurasmus KNX Group

63 PUSH BUTTONS MDT SCN MDT BE-GT Futurasmus KNX Group KNX Devices Catalogue 20 63

64 PUSH BUTTONS IPAS PIAZZA IPAS BRACHETTO 64 KNX Devices Catalogue 20 Futurasmus KNX Group

65 PUSH BUTTONS IPAS CONTRATTEMPO IPAS LARGHO Futurasmus KNX Group KNX Devices Catalogue 20 65

66 PUSH BUTTONS LINGG&JANKE EXCLUSIV 55 LINGG&JANKE IP SWITCHES 66 KNX Devices Catalogue 20 Futurasmus KNX Group

67 PUSH BUTTONS EKINEX NF EKINEX FLANK Futurasmus KNX Group KNX Devices Catalogue 20 6

68 PUSH BUTTONS EKINEX FF NF EKINEX FF FLANK 68 KNX Devices Catalogue 20 Futurasmus KNX Group

69 PUSH BUTTONS INTERRA ISWITCH INTERRA ISWITCH LCD Futurasmus KNX Group KNX Devices Catalogue 20 69

70 PUSH BUTTONS GEPRO KNX4 DAKANIMO KAMEREON 0 KNX Devices Catalogue 20 Futurasmus KNX Group

71 PUSH BUTTONS IDDERO VERSO ARCUS TOUCH IT SMART Futurasmus KNX Group KNX Devices Catalogue 20

72 PUSH BUTTONS ELSNER CORLO TOUCH 2 KNX Devices Catalogue 20 Futurasmus KNX Group