Australian Standard. Water mist fire protection systems System design, installation and commissioning AS

Size: px
Start display at page:

Download "Australian Standard. Water mist fire protection systems System design, installation and commissioning AS"

Transcription

1 AS Australian Standard Water mist fire protection systems System design, installation and commissioning

2 This Australian Standard was prepared by Committee FP/12, Aqueous Fire Protection Systems. It was approved on behalf of the Council of Standards Australia on 21 May 1999 and published on 5 August The following interests are represented on Committee FP/12: Australian Chamber of Commerce and Industry Department of Defence Fire Protection Association of Australia Institute of Security Executives Institution of Engineers Australia Metal Trades Industry Association of Australia Scientific Services Laboratory A Business Unit of AGAL Society of Fire Protection Engineers Australasian Chapter Waterways Authority (N.S.W.) Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto. Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue of Publications; this information is supplemented each month by the magazine The Australian Standard, which subscribing members receive, and which gives details of new publications, new editions and amendments, and of withdrawn Standards. Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made without delay in order that the matter may be investigated and appropriate action taken. This Standard was issued in draft form for comment as DR

3 AS Australian Standard Water mist fire protection systems System design, installation and commissioning First published as AS Published by Standards Australia (Standards Association of Australia) 1 The Crescent, Homebush, NSW 2140 ISBN

4 AS PREFACE This Standard was prepared by the Standards Australia Committee FP/12, Aqueous Fire Protection Systems. The objective of this Standard is to provide users of water mist fire protection systems with specific requirements for low, medium and high pressure systems using either closed or open nozzles. Some systems may employ compressed air or inert gases to produce water mist. The Standard also provides requirements for the design installation, testing and commissioning of water mist systems. It is essential that fire protection equipment must be carefully maintained to ensure instant readiness when required. The importance of maintenance cannot be too highly emphasized. This Standard does not provide for the maintenance of water mist systems. Maintenance of fire protection equipment is contained in the AS 1851 series. It is a basic assumption in all technical Standards that each Standard will be used only by persons competent in the field of application. This is of particular importance in fire protection work. Accordingly, it is emphasized that the design requirements in this Standard are to be interpreted only by trained and experienced designers. The marine systems requirements given in this Standard are not intended to override the requirements of the international convention on Safety of Life at Sea (SOLAS) or the International Maritime Orders (IMO). Where conflict exists, SOLAS or IMO will take precedence. The term normative has been used in this Standard to define the application of the appendix to which it applies. A normative appendix is an integral part of a Standard. This Standard incorporates a Commentary on some of the Clauses. The Commentary directly follows the relevant clause, is designated by C preceding the clause number and is printed in italics in a panel. The Commentary is for information only and does not need to be followed for compliance with the Standard. Copyright STANDARDS AUSTRALIA Users of Standards are reminded that copyright subsists in all Standards Australia publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from Standards Australia. Permission may be conditional on an appropriate royalty payment. Requests for permission and information on commercial software royalties should be directed to the head office of Standards Australia. Standards Australia will permit up to 10 percent of the technical content pages of a Standard to be copied for use exclusively in-house by purchasers of the Standard without payment of a royalty or advice to Standards Australia. Standards Australia will also permit the inclusion of its copyright material in computer software programs for no royalty payment provided such programs are used exclusively in-house by the creators of the programs. Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever the Standard is amended or revised. The number and date of the Standard should therefore be clearly identified. The use of material in print form or in computer software programs to be used commercially, with or without payment, or in commercial contracts is subject to the payment of a royalty. This policy may be varied by Standards Australia at any time.

5 3 AS CONTENTS Page FOREWORD... 6 SECTION 1 SCOPE AND GENERAL 1.1 SCOPE OBJECTIVES APPLICATION NEW DESIGNS AND INNOVATIONS APPROVAL AND LISTINGS REFERENCED DOCUMENTS DEFINITIONS INTERPRETATION OF SPECIFIED LIMITING VALUES USES AND LIMITATIONS OF WATER MIST SYSTEMS SECTION 2 SAFETY REQUIREMENTS 2.1 SAFETY OF PERSONNEL SAFETY REQUIREMENTS WATER QUALITY SECTION 3 SYSTEM DESIGN 3.1 GENERAL LISTING TYPES SYSTEM TYPES ENCLOSURE VARIABLES FIRE LOCATION OBSTRUCTION AND SHIELDING VENTILATION HAZARD ANALYSIS DOCUMENTATION SUPPLY COMPONENTS EXTINGUISHING AGENT ADDITIVES CONTROL SYSTEMS MARINE SYSTEMS MARKING ACCEPTANCE OF INSTALLATION SECTION 4 PROTECTED HAZARD REQUIREMENTS 4.1 UNCLOSABLE OPENINGS SERVICES PRESSURE RELIEF VENTING... 20

6 AS Page SECTION 5 WATER SUPPLY 5.1 WATER SUPPLIES PRESSURIZED STORAGE CONTAINER ARRANGEMENT ATOMIZING GAS FOR TWIN FLUID SYSTEMS SECTION 6 COMPONENTS AND INSTALLATION 6.1 GENERAL VALVES PIPEWORK INSTALLATION OF PIPEWORK DRAIN VALVES DIRT TRAPS DISCHARGE NOZZLES STRAINERS COMPRESSED GAS PRESSURE REGULATING VALVE (PRV) CHECK VALVES BACK FLOW PREVENTION OR AIR BREAK TANKS PRESSURE INDICATION STORAGE CONTAINERS SECTION 7 CONTROL SYSTEMS 7.1 GENERAL ELECTRICAL CONTROL OPERATING DEVICES CONTROL AND INDICATING EQUIPMENT AUDIBLE ALARMS AND VISIBLE WARNING DEVICES MECHANICAL RELEASE PNEUMATIC RELEASE TIME DELAY FUNCTION SECTION 8 MARINE 8.1 GENERAL SYSTEM DESIGN PUMP CAPACITY PUMP POWER SUPPLY PRESSURIZED STORAGE CONTAINERS AUDIBLE AND VISUAL INDICATIONS WATER SUPPLY STABILITY SECTION 9 MARKING 9.1 CONTROL AND INDICATING EQUIPMENT (CIE) WARNING AND INSTRUCTION SIGNS IDENTIFICATION AND MARKING OF CONTAINERS PRESSURE GAUGES LABELLING OF INDICATORS AND CONTROLS... 35

7 5 AS Page SECTION 10 COMMISSIONING AND ACCEPTANCE TESTING 10.1 CRITERIA FOR ACCEPTANCE FAILURE APPROVAL OF WATER MIST SYSTEMS LEAK TESTS PNEUMATIC PRESSURE TESTING WARNING SECTION 11 HYDRAULIC CALCULATIONS 11.1 GENERAL CALCULATION METHODS HAZEN-WILLIAMS DARCY-WEISBACH PNEUMATIC CALCULATION PROCEDURES FOR ATOMIZING MEDIA IN TWIN FLUID SYSTEMS SECTION 12 ADDITIVES 12.1 GENERAL LIMITATIONS SAFETY APPENDIX A COMMISSIONING CHECK LIST... 45

8 AS FOREWORD The fire protection of a building or plant must be considered as a whole. While water mist fire protection systems form only a part, though an important one, of the available facilities, it should not be assumed that their adoption necessarily removes the need to consider supplementary measures, such as the provision of portable fire extinguishers or mobile appliances for first aid or emergency use, or measures to deal with special hazards. This Standard is not intended to be a substitute for sprinkler systems, which provide similar or equivalent performance to water mist protection. A water mist system designed and tested in accordance with this Standard does not provide a deemed to satisfy solution for a sprinkler system designed to AS Water mist systems have been found to be effective for the suppression or extinguishment of a wide variety of exposed and shielded Class B hydrocarbon pool, spray and cascading pool fires, and for combinations of incidental Class A and Class B fires. Water mist systems have also demonstrated their effectiveness on some Class A fires, including insulated electrical cable fires. This Standard will be reviewed as the results of further testing and new developments become available.

9 7 AS STANDARDS AUSTRALIA Australian Standard Water mist fire protection systems System design, installation and commissioning SECTION 1 SCOPE AND GENERAL 1.1 SCOPE This Standard sets out minimum requirements for design, installation and commissioning of water mist fire protection systems using potable water or natural sea water. It does not provide definitive fire performance criteria. The Standard is limited to systems that have demonstrated acceptable levels of performance in fire tests as part of a listing process. They may be arranged as total flooding, zoned or local application systems and designed for suppression or extinguishment. Where the water supplied to the system is from an unlimited supply, as defined in Clause 5.1.2, the system may also be designed for fire control. This Standard establishes minimum requirements for water mist technology and is based on sound engineering principles, test data and field experience. Water mist systems are specialized fire protection systems. Design and installation of these systems requires specialized training, knowledge and experience. For systems using additives, the requirements of Sections 2 and 12 apply. Water mist fire protection systems are herein referred to as a system or the system. C1.1 This Standard addresses the use of fine water sprays for the efficient extinguishment of fires. Water mist systems may be effective on several classes of fire and various applications within those classes, provided they have been tested and listed for the particular application and class. As a means of allowing distinctions to be made between coarser and finer sprays across the 1000 µm spectrum of this Standard s definition of water mist, it is useful to subdivide mist into Class 1, 2, or 3 water mist, according to the droplet size distribution. The defining boundaries for the three classifications are illustrated in Figure 1.1. Class 1 water mist The cumulative percent volume distribution curve lies entirely to the left of a line connecting D v 10 = 100 µm and D v 90 = 200 µm. This represents the finest water mist. Class 2 water mist A portion of the cumulative percent volume distribution curve lies beyond the limits of a Class 1 spray, but entirely to the left of the line connecting D v 90 = 200 µm and D v 90 = 400 µm. Class 3 water mist The D v 90 is greater than 400 µm, or for which any portion of the curve extends to the right of the Class 2 cut-off line (but the D v 90 is less than 1000 µm). The drop size distribution of a spray does not uniquely define its suitability for a given application. It is inseparable from the spray direction relative to the fire plume, its velocity and flux density. The momentum of an element of spray is the product of its velocity (which includes direction as well as speed) and the mass of dispersed water droplets. COPYRIGHT

10 The remainder of this document is available for purchase online at SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning AS 1670.3 1997 Australian Standard Fire detection, warning, control and intercom systems System design, installation and commissioning Part 3: Monitoring network performance This Australian Standard was

More information

Australian Standard. Gaseous fire extinguishing systems AS (Incorporating Amendment No. 1) AS

Australian Standard. Gaseous fire extinguishing systems AS (Incorporating Amendment No. 1) AS AS 4214 2002 (Incorporating Amendment No. 1) AS 4214 2002 Australian Standard Gaseous fire extinguishing systems This Australian Standard was prepared by Committee FP-011, Gaseous Fire Protection. It was

More information

AS Australian Standard. Portable fire extinguishers Guide to servicing. This is a free 7 page sample. Access the full version online.

AS Australian Standard. Portable fire extinguishers Guide to servicing. This is a free 7 page sample. Access the full version online. AS 3676 1989 Australian Standard Portable fire extinguishers Guide to servicing This Australian Standard was prepared by Committee FP/3, Fire Extinguishers. It was approved on behalf of the Council of

More information

AS Australian Standard. Guards and patrols. This is a free 6 page sample. Access the full version online.

AS Australian Standard. Guards and patrols. This is a free 6 page sample. Access the full version online. AS 4421 1996 Australian Standard Guards and patrols This Australian Standard was prepared by Committee EL/31, Intruder Alarm Equipment and Installations. It was approved on behalf of the Council of Standards

More information

Australian Standard. Automatic fire detection and alarm systems System design, installation, and commissioning AS

Australian Standard. Automatic fire detection and alarm systems System design, installation, and commissioning AS AS 1670 1986 Australian Standard Automatic fire detection and alarm systems System design, installation, and commissioning This Australian standard was prepared by Committee FP/2, Automatic Fire Detection

More information

Australian Standard. Safeguarding of machinery

Australian Standard. Safeguarding of machinery AS 4024.2 1998 Australian Standard Safeguarding of machinery Part 2: Installation and commissioning requirements for electro-sensitive systems Optoelectronic devices This Australian Standard was prepared

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency evacuation lighting for buildings AS/NZS 2293.2:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee LG/7,

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3809:1998 Australian/New Zealand Standard Safes and strongrooms AS/NZS 3809:1998 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee MS/58, Prefabricated Safes and

More information

AS Australian Standard. Domestic solid fuel burning appliances Installation. This is a free 6 page sample. Access the full version online.

AS Australian Standard. Domestic solid fuel burning appliances Installation. This is a free 6 page sample. Access the full version online. AS 2918 1990 Australian Standard Domestic solid fuel burning appliances Installation This Australian Standard was prepared by Committee CS/62, Solid Fuel Burning Appliances. It was approved on behalf of

More information

Australian Standard. Methods for fire tests on building materials, components and structures

Australian Standard. Methods for fire tests on building materials, components and structures AS 1530.3 1989 Australian Standard Methods for fire tests on building materials, components and structures Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke

More information

Australian Standard. Fire protection for mobile and transportable equipment AS AS

Australian Standard. Fire protection for mobile and transportable equipment AS AS AS 5062 2006 AS 5062 2006 Australian Standard Fire protection for mobile and transportable equipment This Australian Standard was prepared by Committee FP-022, Fire Protection of Mobile Transportable Equipment.

More information

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning. Part 1: Fire AS 1670.

Australian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning. Part 1: Fire AS 1670. AS 1670.1 2004 (Incorporating Amendment No. 1) AS 1670.1 2004 Australian Standard Fire detection, warning, control and intercom systems System design, installation and commissioning Part 1: Fire This Australian

More information

Australian Standard. Fire hydrant installations. Part 1: System design, installation and commissioning AS

Australian Standard. Fire hydrant installations. Part 1: System design, installation and commissioning AS AS 2419.1 1994 (Incorporating Amendment Nos 1 and 2) AS 2419.1 1994 Australian Standard Fire hydrant installations Part 1: System design, installation and commissioning This Australian Standard was prepared

More information

Australian Standard. Fire detection, warning, control and intercom systems Control and indicating equipment. Part 1: Fire

Australian Standard. Fire detection, warning, control and intercom systems Control and indicating equipment. Part 1: Fire AS 4428.1 1998 (Incorporating Amendment No. 1) AS 4428.1 Australian Standard Fire detection, warning, control and intercom systems Control and Part 1: Fire This Australian Standard was prepared by Committee

More information

Australian Standard. Fixed fire protection installations Pumpset systems AS AS 2941

Australian Standard. Fixed fire protection installations Pumpset systems AS AS 2941 AS 2941 2002 AS 2941 Australian Standard Fixed fire protection installations Pumpset systems This Australian Standard was prepared by Committee FP-008, Fire Service Pumps. It was approved on behalf of

More information

Australian Standard. The use of mechanical ventilation and air conditioning in buildings. Part 1: Fire and smoke control AS 1668.

Australian Standard. The use of mechanical ventilation and air conditioning in buildings. Part 1: Fire and smoke control AS 1668. AS 1668.1 1991 Australian Standard The use of mechanical ventilation and air conditioning in buildings Part 1: Fire and smoke control This Australian Standard was prepared by Committee ME/62, Mechanical

More information

GRAPHICAL SYMBOLS FOR FIRE PROTECTION DRAWINGS

GRAPHICAL SYMBOLS FOR FIRE PROTECTION DRAWINGS SAA HB20 1996 Australian Standard GRAPHICAL SYMBOLS FOR FIRE PROTECTION DRAWINGS SAA HB20 1996 Australian Standard GRAPHICAL SYMBOLS FOR FIRE PROTECTION DRAWINGS PUBLISHED BY STANDARDS AUSTRALIA (STANDARDS

More information

Australian Standard PORTABLE FIRE EXTINGUISHERS WATER (SODA ACID) TYPE AS

Australian Standard PORTABLE FIRE EXTINGUISHERS WATER (SODA ACID) TYPE AS AS 1840 1976 Australian Standard PORTABLE FIRE WATER (SODA ACID) TYPE May 1982 AS 1840 OBSOLESCENT STANDARD AS 1840 is obsolescent and is not to be used in relation to the manufacture of new extinguishers.

More information

Australian Standard. Smoke alarms. AS (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786

Australian Standard. Smoke alarms. AS (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786 AS 3786 1993 (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786 Australian Standard Smoke alarms This Australian Standard was prepared by Committee FP-002, Automatic Fire Detection and Alarm Systems.

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1337:1992 Australian/New Zealand Standard Eye protectors for industrial applications [Defence Title allocated by Codification and Standardisation Authority: PROTECTOR, EYE INDUSTRIAL NATO Supply

More information

Australian Standard. Components for the protection of openings in fire-resistant walls. Part 1: Fire-resistant doorsets AS AS 1905.

Australian Standard. Components for the protection of openings in fire-resistant walls. Part 1: Fire-resistant doorsets AS AS 1905. AS 1905.1 2005 AS 1905.1 2005 Australian Standard Components for the protection of openings in fire-resistant walls Part 1: Fire-resistant doorsets This Australian Standard was prepared by Committee FP-019,

More information

AS AS Australian Standard. Installation of fire hose reels. This is a free 6 page sample. Access the full version online.

AS AS Australian Standard. Installation of fire hose reels. This is a free 6 page sample. Access the full version online. AS 2441 2005 AS 2441 2005 Australian Standard Installation of fire hose reels This Australian Standard was prepared by Committee FP-007, Fire Hose Reels. It was approved on behalf of the Council of Standards

More information

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508 AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial

More information

AS AS Australian Standard. Soils for landscaping and garden use. This is a free 7 page sample. Access the full version online.

AS AS Australian Standard. Soils for landscaping and garden use. This is a free 7 page sample. Access the full version online. AS 4419 2003 AS 4419 Australian Standard Soils for landscaping and garden use This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the

More information

Australian Standard. Acoustics Recommended design sound levels and reverberation times for building interiors AS

Australian Standard. Acoustics Recommended design sound levels and reverberation times for building interiors AS AS 2107 1987 Australian Standard Acoustics Recommended design sound levels and reverberation times for building interiors This Australian standard was prepared by Committee AV/4, Acoustics Architectural.

More information

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No. AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,

More information

Interim Australian Standard

Interim Australian Standard AS 1735.10(Int) 1998 (Incorporating Amendment Nos 1 and 2) Expries 5 August 2003) AS 1735.10(Int) Interim Australian Standard Lifts, escalators and moving walks Part 10: Tests This Australian Standard

More information

Australian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293.

Australian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293. AS 2293.1 2005 AS 2293.1 2005 Australian Standard Emergency escape lighting and exit signs for buildings Part 1: System design, installation and operation This Australian Standard was prepared by Committee

More information

Australian Standard. Fire detection and alarm systems. Part 6: Carbon monoxide fire detectors using electro-chemical cells

Australian Standard. Fire detection and alarm systems. Part 6: Carbon monoxide fire detectors using electro-chemical cells AS 7240.6 2006 ISO 7240-6:2004 AS 7240.6 2006 Australian Standard Fire detection and alarm systems Part 6: Carbon monoxide fire detectors using electro-chemical cells This Australian Standard was prepared

More information

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529 AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures

More information

Australian Standard. Functional safety Safety instrumented systems for the process industry sector

Australian Standard. Functional safety Safety instrumented systems for the process industry sector AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1841.1:2007 AS/NZS 1841.1:2007 Australian/New Zealand Standard Portable fire extinguishers Part 1: General requirements AS/NZS 1841.1:2007 This Joint Australian/New Zealand Standard was prepared

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 61779.6:2000 (Incorporating Amendment No. 1) AS/NZS 61779.6:2000 Australian/New Zealand Standard Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2293.2:1995 (Incorporating Amendment Nos 1 and 2) AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency escape lighting and exit signs for buildings AS/NZS 2293.2:1995 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2918:2001 AS/NZS 2918 Australian/New Zealand Standard Domestic solid fuel burning appliances Installation Building Code of Australia Primary referenced Standard AS/NZS 2918:2001 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared

More information

AS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online.

AS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online. AS 3743 2003 AS 3743 Australian Standard Potting mixes This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the Council of Standards Australia

More information

Australian Standard. Closed circuit television (CCTV) Part 4: Remote video AS AS

Australian Standard. Closed circuit television (CCTV) Part 4: Remote video AS AS AS 4806.4 2008 AS 4806.4 2008 Australian Standard Closed circuit television (CCTV) Part 4: Remote video This Australian Standard was prepared by Committee EL-051, Non-Broadcast Television. It was approved

More information

Australian Standard. Security screen doors and security window grilles AS AS 5039

Australian Standard. Security screen doors and security window grilles AS AS 5039 AS 5039 2003 AS 5039 Australian Standard Security screen doors and security window grilles This Australian Standard was prepared by Committee CS-023, Security Screen Doors and Security Window Grilles.

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4692.1:2005 AS/NZS 4692.1:2005 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general requirements AS/NZS 4692.1:2005 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2243.5 Australian/New Zealand Standard Safety in laboratories Part 5: Non-ionizing radiations Electromagnetic, sound and ultrasound This Joint Australian/New Zealand Standard was prepared by Joint

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3500.4:2003 (Incorporating Amendment Nos 1 and 2) AS/NZS 3500.4:2003 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services AS/NZS 3500.4:2003 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2033:2008 AS/NZS 2033:2008 Australian/New Zealand Standard Installation of polyethylene pipe systems AS/NZS 2033:2008 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

More information

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems Australian/New Zealand Standard Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Superseding AS/NZS 2053.2:2001, AS/NZS 2053.6:2001 and AS/NZS 2053.7:2002 This

More information

AS/NZS 3133:2008 AS/NZS

AS/NZS 3133:2008 AS/NZS Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1338.1:2012 AS/NZS 1338.1:2012 Australian/New Zealand Standard Filters for eye protectors Part 1: Filters for protection against radiation generated in welding and allied operations AS/NZS 1338.1:2012

More information

AS/NZS :2008

AS/NZS :2008 AS/NZS 60079.29.2:2008 Australian/New Zealand Standard Explosive atmospheres Part 29.2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.29.2:2008

More information

AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark

AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark AS/NZS 4417.1:2012 Appending New Zealand-only Amendment A Australian/New Zealand Standard Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark Superseding AS/NZS 4417.1:2009

More information

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard Australian/New Zealand Standard AS/NZS 4821:2014 (EN 15090:2012, MOD) Protective footwear for firefighters Requirements and test methods Superseding AS/NZS 4821:2006 AS/NZS 4821:2014 This standard, is

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1850:2009 AS/NZS 1850:2009 Australian/New Zealand Standard Portable fire extinguishers Classification, rating and performance testing AS/NZS 1850:2009 This Joint Australian/New Zealand Standard

More information

AS/NZS :2015. Plumbing and drainage AS/NZS :2015. Part 4: Heated water services. Australian/New Zealand Standard

AS/NZS :2015. Plumbing and drainage AS/NZS :2015. Part 4: Heated water services. Australian/New Zealand Standard AS/NZS 3500.4:2015 Incorporating Amendment No. 1 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services Superseding AS/NZS 3500.4:2003 AS/NZS 3500.4:2015 AS/NZS 3500.4:2015

More information

AS/NZS 3190:2011 AS/NZS

AS/NZS 3190:2011 AS/NZS AS/NZS 3190:2016 Australian/New Zealand Standard Approval and test specification Residual current devices (currentoperated earth-leakage devices) Superseding AS/NZS 3190:2011 AS/NZS 3190:2016 AS/NZS 3190:2016

More information

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online. AS IEC 60942 2004 IEC 60942:2003 AS IEC 60942 Australian Standard Electroacoustics Sound calibrators This Australian Standard was prepared by Committee AV-002, Acoustics Instrumentation and Measurement

More information

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014

More information

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard AS/NZS 61386.1:2015 Australian/New Zealand Standard Conduit systems for cable management Part 1: General requirements Superseding AS/NZS 2053.1:2001 AS/NZS 61386.1:2015 AS/NZS 61386.1:2015 This joint Australian/New

More information

AS/NZS 3957:2006 AS/NZS

AS/NZS 3957:2006 AS/NZS AS/NZS 3957:2014 Australian/New Zealand Standard Light-transmitting screens and curtains for welding operations Superseding AS/NZS 3957:2006 AS/NZS 3957:2014 AS/NZS 3957:2014 This joint Australian/New

More information

AS/NZS :2014

AS/NZS :2014 (ISO 13857:2008, IDT) Australian/New Zealand Standard Safety of machinery Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs AS/NZS 4024.1801:2014 This joint Australian/New

More information

AS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard

AS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard AS/NZS 3111:2009 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009 AS/NZS 3111:2009 This joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3019:2007 AS/NZS 3019:2007 Australian/New Zealand Standard Electrical installations Periodic verification AS/NZS 3019:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical

More information

AS/NZS IEC :2015

AS/NZS IEC :2015 AS/NZS IEC 60947.5.6:2015 (IEC 60947-5-6, Ed. 1.0:1999, IDT) Australian/New Zealand Standard Low-voltage switchgear and Part 5.6: Control circuit devices and switching elements DC interface for proximity

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4645.2:2008 AS/NZS 4645.2:2008 Australian/New Zealand Standard Gas distribution networks Part 2: Steel pipe systems AS/NZS 4645.2:2008 This Joint Australian/New Zealand Standard was prepared by

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4692.1:2005 (Incorporating Amendment Nos 1 and 2) Reconfirmed 2016 AS/NZS 4692.1:2005 A2 Australian/New Zealand Standard Electric water heaters Part 1: Energy consumption, performance and general

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4586:2004 (Incorporating Amendment No. 1) AS/NZS 4586:2004 Australian/New Zealand Standard Slip resistance classification of new pedestrian surface materials AS/NZS 4586:2004 This Joint Australian/New

More information

AS/NZS IEC :2013

AS/NZS IEC :2013 AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED

More information

AS/NZS 4012:1999 AS/NZS

AS/NZS 4012:1999 AS/NZS Australian/New Zealand Standard AS/NZS 4012:2014 Incorporating Amendment No. 1 Domestic solid fuel burning appliances Method for determination of power output and efficiency Superseding AS/NZS 4012:1999

More information

AS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard

AS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard AS/NZS 3120:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Approval and test specification Cord extension sockets AS/NZS 3120:2011 AS/NZS 3120:2011 This Joint Australian/New Zealand

More information

Substations and high voltage installations exceeding 1 kv a.c.

Substations and high voltage installations exceeding 1 kv a.c. AS 2067:2016 AS 2067:2016 Substations and high voltage installations exceeding 1 kv a.c. This Australian Standard was prepared by Committee EL-043, High Voltage Installations. It was approved on behalf

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3666.2:2011 AS/NZS 3666.2:2011 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 2: Operation and maintenance AS/NZS 3666.2:2011 This Joint Australian/New

More information

AS/NZS :2014

AS/NZS :2014 Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements

More information

AS/NZS :2016

AS/NZS :2016 Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2201.1:2007 AS/NZS 2201.1:2007 Australian/New Zealand Standard Intruder alarm systems Part 1: Client s premises Design, installation, commissioning and maintenance AS/NZS 2201.1:2007 This Joint

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3200.2.4:2006 IEC 60601-2-4:2005 AS/NZS 3200.2.4:2006 Australian/New Zealand Standard Medical electrical equipment Part 2.4: Particular requirements for safety Cardiac defibrillators AS/NZS 3200.2.4:2006

More information

Australian/New Zealand Standard TM

Australian/New Zealand Standard TM 1 AS/NZS 1841.8:2007 AS/NZS 1841.8:2007 Australian/New Zealand Standard TM Portable fire extinguishers Part 8: Specific requirements for non-rechargeable type extinguishers 1 SCOPE This Standard specifies

More information

AS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004

AS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 (Incorporating Amendment No. 1) Australian/New Zealand Standard Code of practice for handling combustible dusts Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 AS/NZS 4745:2012 This Joint

More information

AS/NZS 4234:2008 AS/NZS

AS/NZS 4234:2008 AS/NZS AS/NZS 4234:2008 Incorporating Amendment No. 1, 2, and 3 Australian/New Zealand Standard Heated water systems Calculation of energy consumption Superseding AS/NZS 4234:2008 AS/NZS 4234:2008 AS/NZS 4234:2008

More information

AS/NZS :1995. Emergency escape lighting and exit signs for buildings AS/NZS :1995. Part 2: Inspection and maintenance

AS/NZS :1995. Emergency escape lighting and exit signs for buildings AS/NZS :1995. Part 2: Inspection and maintenance Australia/New Zealand Standard AS/NZS 2293.2:1995 Incorporating Amendment No. 1, 2, and 3 Emergency escape lighting and exit signs for buildings Superseding in part NZS 6742:1971 and AS 2293.2 1987 AS/NZS

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1680.5:2012 AS/NZS 1680.5:2012 Australian/New Zealand Standard Interior and workplace lighting Part 5: Outdoor workplace lighting AS/NZS 1680.5:2012 This Joint Australian/New Zealand Standard was

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint

More information

Medical electrical equipment

Medical electrical equipment AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements

More information

AS/NZS :2015

AS/NZS :2015 AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998

More information

AS/NZS IEC 62560:2014

AS/NZS IEC 62560:2014 AS/NZS IEC 62560:2014 (IEC 62560-2011 Ed 1.0, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications AS/NZS IEC 62560:2014 AS/NZS

More information

AS/NZS ISO/IEC :2012

AS/NZS ISO/IEC :2012 AS/NZS ISO/IEC 14763.3:2012 (ISO/IEC 14763-3:2011, MOD) Australian/New Zealand Standard Telecommunications installations Implementation and operation of customer premises cabling Part 3: Testing of optical

More information

AS/NZS :2009

AS/NZS :2009 Australian/New Zealand Standard AS/NZS 61558.2.6:2009 Incorporating Amendment No. 1 (IEC 61558-2-6 Ed 2, MOD) Safety of transformers, reactors, power supply units and similar products for supply voltages

More information

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

More information

AS/NZS :2014

AS/NZS :2014 AS/NZS 4755.3.3:2014 Australian/New Zealand Standard Demand response capabilities and supporting technologies for electrical products Part 3.3: Interaction of demand response enabling devices and electrical

More information

AS/NZS IEC :2016

AS/NZS IEC :2016 AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety

More information

ISO 6183 INTERNATIONAL STANDARD. Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation

ISO 6183 INTERNATIONAL STANDARD. Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation INTERNATIONAL STANDARD ISO 6183 Second edition 2009-06-15 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation Équipement de protection contre l'incendie

More information

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017 AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014

More information

MSC Guidelines for Watermist Fire Suppression Systems Procedure Number: E1-03 Revision Date: 02/16/2017

MSC Guidelines for Watermist Fire Suppression Systems Procedure Number: E1-03 Revision Date: 02/16/2017 Procedure Number: E1-03 Revision Date: 02/16/2017 References: S. T. Brady, CDR, Chief, Engineering Division a. National Fire Protection Association (NFPA) 750, 1996 Edition, Standard on Water Mist Fire

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO 21987:2011 ISO 21987:2009 AS/NZS ISO 21987:2011 Australian/New Zealand Standard Ophthalmic optics Mounted spectacle AS/NZS ISO 21987:2011 This Joint Australian/New Zealand Standard was prepared

More information

Household and similar electrical appliances Safety

Household and similar electrical appliances Safety AS/NZS 60335.2.69:2012 (IEC 60335-2-69 Ed 4, MOD) Australian/New Zealand Standard Household and similar electrical appliances Safety Part 2.69: Particular requirements for wet and dry vacuum cleaners,

More information

AS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009

AS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009 AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy

More information

AS/NZS TR IEC :2012

AS/NZS TR IEC :2012 AS/NZS TR IEC 61000.2.6:2012 IEC/TR 61000-2-6, Ed.1.0 (1995) Technical Report Electromagnetic compatibility (EMC) Part 2.6: Environment Assessment of the emission levels in the power supply of industrial

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016 Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1337.1:2010 (Incorporating Amendment No. 1) AS/NZS 1337.1:2010 Australian/New Zealand Standard Personal eye protection Part 1: Eye and face protectors for occupational applications AS/NZS 1337.1:2010

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18926 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité

More information

AS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements

AS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements

More information

AS/NZS :1998 AS/NZS ISO

AS/NZS :1998 AS/NZS ISO (ISO 817:2014, IDT) Australian/New Zealand Standard Refrigerants Designation and safety classification Superseding AS/NZS 1677.1:1998 AS/NZS ISO 817:2016 This joint Australian/New Zealand standard was

More information