2018 Training Directory. BT University

Transcription

1 2018 Training Directory BT University

2 Table of Contents Welcome to BT University! 2 Building Automation 5 Desigo CC Master Operator Training Path 6-8 Insight Master Operator Training Path 9-12 PPCL Master Programmer Training Path Field Panel and FLN Curriculum Supplemental Training Courses Web-Based Training Courses Security 25 SiPass Integrated 26 Fire and Life Safety 27 Training by Management Station Desigo Fire Safety Modular Training Desigo Life Safety Training Cerberus PRO Modular Training Cerberus PRO Training MXL Training Additional Training Offerings 44 Certification Training 45 KNX Certification (GAMMA Lighting) 46 Training Enrollment Form 47 Notes 48 1

3 Welcome Welcome to BT University! Introduction to the Learning Environment In today's competitive market, a highly skilled workforce is vital for success. Our training offerings integrate best practices and new learning technologies to offer flexibility in maximizing your training dollars. Instructor-Led Training with Hands-on Training Simulators Web-Based Training Virtual Instructor-Led Training Customized Training Offerings Onsite Training One in five workers do not have up-to-date professional skills *. Through training, keep current and help bridge the skills gap. Training Paths: Building the Bridge in the Skills Gap A training path is a road map that is your guide to lead you to master level skills. Our award-winning training paths have been found to: Improve productivity Increase job satisfaction Gain on-the-job confidence Take the guess work out of class selection To start your journey, we have free web-based training offerings in the training paths. After you launch the course on ES Online, BT University assigns you a training path. ES Online, is our Learning Management System where you can access your training path, view your training history, locate upcoming classes, launch web-based training and obtain copies of your course certificates. * Study conducted by Harris Poll 2

4 Welcome Building Automation Training Offerings Key to the Graphic Symbols BT University provides a wide range of Building Automation, Fire and Security training classes to help you understand and manage your system and optimize its functionality. We are your partner in maximizing your performance to ensure you have the skills to provide superior building functionality. Through your learning journey, you will encounter a variety of learning opportunities. Instructor-Led Our classroom training provides an objective based curriculum and includes hands-on labs to allow students to practice with the Siemens hardware and software. Our classes are offered nationwide and can be brought onsite to your facility. Virtual Instructor-Led The Virtual Instructor- Led classes offer you a classroom experience but with no travel expenses and the flexibility to work around your schedule. The courses are taught using the GoToTraining software and can be delivered anywhere there is an internet connection. Web-Based Our self-paced, webbased training allows you to select topics specific to your needs and set your own pace for completing the chosen courses. These courses are available through ES Online. Customized We have the ability to customize training to meet your specific needs. Whether it is incorporating topics from multiple classes into one new class or using site specific examples, we will work with you to ensure you get exactly what you need. Length of an instructorled course in days Length of a virtual instructor-led or a web-based course in hours Click for the full course description or go to com/btuniversity Click to request enrollment on ES Online or log on at esonline Our robust curriculum is developed and taught by our team of factory certified instructors. 3

5 Welcome People spend about 90 percent of their lives indoors. Buildings are not just a place for working and living. They are the places where we spend our lives. "All around the world, buildings provide environments for people to do the things they want to do. Places to play. Places to learn. Places to work. Places to grow. Places to innovate. Places to succeed. We believe that the places we spend time in have a great influence on our lives. They affect how we grow, how we develop, what we achieve, who we become. We at Building Technologies work every day to improve buildings - and therefore people's lives. We are creating perfect places. It is our inspiration, our vision." - Matthias Rebellius CEO Siemens Building Technologies BT University is your trusted advisor and partner in keeping your building energy efficient, safe and secure. You invested in your building to make it the perfect place for all occupants, let BT University help ensure you have the knowledge and skills to operate and maintain that investment. This book is your guide through the learning environment. Explore the offerings and contact us at btuniversity.i-bt@siemens.com for any of your training needs. 4

6 Building Automation Training Offerings

7 Building Automation Desigo CC Master Operator Training Path Introduction to Desigo CC ST 101 (Web-Based) Desigo CC Workstation I ST 9203 Desigo CC Reports ST 500 (Virtual Instructor-Led) Desigo CC Workstation II ST 9254 Desigo CC Refresher (optional) ST 501 (Virtual Instructor-Led) $0 $1950 $450 $2195 $400 Desigo CC Take control of your professional development by completing the Desigo CC Master Operator Training Path. The Desigo CC Master Operator Training Path provides the critical knowledge to confidently make informed decisions when navigating through the Desigo CC Management Station. Each class in the path builds upon each other ending with a capstone scenario based training class. Knowledge and skills assessments are part of the instructor-led classes to provide an opportunity for you to assess the knowledge gained during the class and prove your proficiency in operating a Desigo CC Management Station. For experienced operators, a testout is available for the ST Desigo CC Workstation I class. The test-out is available at: Desigo CC Master Operator ST 9273 $1950 6

8 Introduction to Desigo CC Course Code: ST 101 For users who need an overview of the Desigo CC Management Station. None This web-based training course provides an introduction to the Desigo CC Management Station. Understand how Desigo CC pulls together multiple disciplines Understand the layout and workflow of Desigo CC Use basic applications such as: Graphics, Event Treatment, Trending, Reporting and Scheduling Platform Design Workflow Applications Desigo CC Workstation I Course Code: ST 9203 For users of Desigo CC whose role is to perform day-to-day operations on a Desigo CC Management Station. None Learn how to monitor and control your Desigo CC Management Station through hands-on guided exercises and discussions. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Perform Event Management Explain the workflow of Desigo CC Navigate a Desigo CC graphic Command and release points from a graphic Manually collect trend data Utilize Log Viewer to locate historical data Run, execute, modify and save reports Initiate Remote Notification Navigation Event Management Commanding from Graphics Trending Scheduler Log Viewer Reports Remote Notification Knowledge Assessment Skills Assessment Desigo CC Reports Course Code: ST 500 Building Automation For users of Desigo CC who need to retrieve data from the Desigo CC SQL database and display it in a meaningful manner. Completion of the ST Desigo CC Workstation I course is recommended Learn to effectively use the Desigo CC Report application and its associated features. This course is comprised of three 90 minute sessions that are taught virtually. Create a new report folder Open an existing report Navigate the report panes and explore various viewing options Add graphics, trends or a log view definition to a report Adjust report formatting to include font, layout and page setup Generate filters for some of the more commonly used reports Setup Report output routing Execute reports as a PDF, Excel or CSV file Basic Navigation Run a Report Modify an Existing Report Adjust Report Data Filters Execute a Report 7

9 Building Automation Desigo CC Workstation II Course Code: ST 9254 For advanced users of Desigo CC whose role is to create and modify graphics, security groups and user accounts. ST Desigo CC Workstation I Building on Desigo CC Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Modify intrinsic alarm settings Create notification class objects Modify an existing schedule Build a system schedule from scratch Modify an existing graphic Use the evaluation editor Understand how Desigo CC uses the address book Create new users Configure security settings Use the log viewer to locate historical data Modify a report Create new scopes Use scopes to control user access to system objects Monitor an active remote notification Configure contact and escalation rules Alarm Configuration Scheduling Graphics Address Book Users and Security Log Viewer and Reports Scopes Remote Notification Knowledge Assessment Skills Assessment Desigo CC Refresher Course Code: ST 501 For users of Desigo CC who need to refresh their skills on the current market package of the Desigo CC Management Station. This course is optional and not required to earn Master Operator status. Completion of the ST Desigo CC Workstation I course is recommended Refresh your knowledge on the Desigo CC Management Station. You will interact with a live online instructor and other students to work through realworld scenarios using Desigo CC. This course is comprised of two 2 hour sessions that are taught virtually. Use various treatment options to acknowledge and reset alarms Demonstrate how to command and release points Create new and open existing trends Configure the reports output definition to execute a report to a PDF file or an Modify intrinsic alarm configurations and create event enrollment objects Build a BACnet object Utilize Simple, Linear and Discrete Evaluations Create Desigo CC Users Create new and modify existing scopes Create new and modify existing Remote Notifications Alarm Configuration Graphics Editor Trending Reports Scopes Desigo CC Master Operator Course Code: ST 9273 For advanced users of Desigo CC whose role is to perform configuration changes and troubleshoot using the Desigo CC Management Station. ST Desigo CC Workstation I and ST Desigo CC Workstation II Configure and modify applications within Desigo CC to increase your efficiency in monitoring and controlling building systems. Upon successful completion of the training path, you will earn Master Operator status on the latest Desigo CC market package. Demonstrate automatic and non automatic symbol association Create point properties on a graphic Create graphical elements that appear and/or disappear on a graphic Modify a template graphic for all TECs of the same application Associate an object or a point to a document Apply customer views related for divisions, roles or equipment Perform database maintenance at the field panel level, project level and SQL server level Use Desigo CC as a troubleshooting tool to identify an abnormal condition Troubleshooting Graphics Database Configuration Conditional Trending Reaction Processor User Accounts Security Groups Custom Scopes and Views Database Maintenance 8

10 Building Automation Insight Master Operator Training Path Insight Basics ST 102 (Web-Based) Insight Workstation I ST 6203 Insight Reports ST 502 (Virtual Instructor-Led) Insight Workstation II or Insight Workstation II with BACnet ST 6254 or ST 7254 Insight Refresher (optional) ST 503 (Virtual Instructor-Led) Insight Master Operator ST 6273 $0 $1950 $450 $2195 $400 $1950 Insight The Insight Master Operator Training Path provides information on the Insight Workstation platform that has been proven in the building automation industry for over 19 years. Each class in the path builds upon each other ending with a capstone scenario-based training class. Knowledge and skills assessments are part of the instructor-led classes to provide an opportunity for you to assess the knowledge gained during the class and prove your proficiency in operating an Insight Workstation. To help guide you to the correct path, if your building has Ethernet or P2 panels with P1 Terminal Equipment Controllers, then you should complete the ST Insight Workstation II course. If your building uses a BACnet communication protocol, then you should complete the ST Insight Workstation II with BACnet course. For assistance in determining the class to attend, contact BT University at btuniversity.i-bt@ siemens.com. 9

11 Building Automation Insight Basics Insight Workstation I Insight Reports Course Code: ST 102 For users who need an overview of the Insight Workstation. None This web-based training course introduces common Insight applications. Navigate through graphic links Display information text and alarm messages Command a point from a graphic Acknowledge an alarm Add a point memo Start the Report Viewer application Run a report Run a Panel Point Log Report Customize the Insight main menu Graphics Alarm Status Main Menu Report Viewer Panel Point Log Screen Course Code: ST 6203 For users of Insight whose role is to perform day-to-day operations on an Insight Workstation. For experienced operators, a test-out is available at None Learn how to monitor and control your Insight Workstation through hands-on guided exercises and discussions. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Treat an active point in alarm Add a point memo and recognize informational text Manage alarms from a graphic Describe Distributed Digital Control (DDC) Run a Panel Point Log report Describe how commanding a point affects building operation Interpret the operations of an existing schedule Explain the differences between historical, dynamic and combined dynamic plots HVAC Concepts Alarm and Network Messages System Tools Network Status Point Evaluation, Command and Control Trend Data Scheduling Dynamic Plotter Knowledge Assessment Skills Assessment Course Code: ST 502 For users of Insight whose role requires knowledge of the reporting capabilities available at the Insight Workstation. Completion of the ST Insight Workstation I course is recommended Learn how to create multiple reports and how to leverage the data to increase troubleshooting and operational efficiency. This course is comprised of three 90 minute sessions that are taught virtually. Describe the what, where, how and why of Insight Reports Run the following reports: Panel Point Log Panel Point Definition System Activity Log Panel Point Usage Panel PPCL Application Subpoint Display Use the Insight Report Builder Identify practical application of retrieved data Reports Overview Panel Point Log Report Builder Running Reports 10

12 Insight Workstation II Course Code: ST 6254 For advanced users of Insight whose role is to create and modify points, graphics, user accounts, zones and events. This class is for you if your facility has Siemens proprietary field panels. ST Insight Workstation I Building on Insight Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Use System Profile to edit the system architecture Create and modify points Put points into trend Assign privilege levels to user accounts Add objects to Access Groups Create a logical series of links between dynamic graphics Create a new Event and Zone Describe features of Program Editor Describe how Scheduler works Backup and restore the system database Utilize the System Activity Log to track system activity System Architecture Points User Accounts Enhanced Alarming Graphics Event Builder Program Editor Scheduler Database Utilities Knowledge Assessment Skills Assessment Insight Workstation II with BACnet Course Code: ST 7254 For advanced users of Insight with BACnet whose role is to create and modify points, graphics, user accounts, zones and events. This class is for you if your facility has Siemens BACnet field panels or a combination of Siemens BACnet field panels and Siemens proprietary field panels. ST Insight Workstation I Building on Insight Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Use System Profile to edit the system architecture Create and modify points Assign privilege levels to user accounts Create alarm messages and build BACnet notification classes Use Micrografx Designer to create background graphics Create a BACnet command object Use BACnet scheduling to add a new calendar and schedule Backup and restore the database Utilize the System Activity Log to track system activity System Architecture Points User Accounts BACnet Alarms Graphics Equipment Scheduling Program Editor Scheduler Database Utilities Knowledge Assessment Skills Assessment Insight Refresher Course Code: ST 503 Building Automation For users of Insight who need to refresh their skills on the Insight Workstation. This course is optional and not required to earn Master Operator status. Completion of the ST Insight Workstation I course is recommended Refresh your knowledge on the Insight Workstation. Students will interact with a live online instructor and other students to work through real-world scenarios using Insight. This course is comprised of two 90 minute sessions and one 60 minute session that are taught virtually. Identify the types of Insight Trend Reports Demonstrate adding multiple points into trend using Trend Wizard Discuss the fundamental relationship in Insight between points, zones, schedules and PPCL Demonstrate how to schedule zones and events Explain the functions of the Database Transfer Application Demonstrate how to backup and restore a database using the Insight backup utility Trending Equipment Scheduling Database Utilities 11

13 Building Automation Insight Master Operator Course Code: ST 6273 For advanced users of Insight whose role is to perform configuration changes and to troubleshoot using the Insight Workstation. ST Insight Workstation I and ST Insight Workstation II or ST Insight Workstation II with BACnet Configure and modify applications within Insight to increase your efficiency in monitoring and controlling building systems. Upon successful completion of the training path, students will earn Master Operator status on Insight version Create individual user accounts with assigned privileges Verify system configuration and connectivity Import and enable a PPCL program Schedule zones and mode points Import and enable a PPCL program to control the system Create report templates and run reports to verify proper system operation and configuration Create and modify graphics to monitor system operation Create trend definitions and trend reports Schedule recurring backups of the Insight database Use Insight as a troubleshooting tool to identify an abnormal condition Troubleshooting User Accounts System Profile Trending Database Maintenance Graphics Database Operations 12

14 Building Automation PPCL Master Programmer Training Path Introduction to Control Programming ST 103 (Web-Based) Hour PPCL Programming I ST 6304 PPCL Syntax Review ST 104 (Web-Based) $0 $2195 $150 PPCL Programming Learn Powers Process Control Language (PPCL) in simple and easy steps starting from basic to advanced concepts. Each class builds upon each other ending with a capstone scenario-based training class. To become a Master Programmer, you will need to complete the required classes in the training path. This training path is not based on a management station so if your facility uses PPCL, this training path is for you. PPCL Programming II ST 6354 $2195 PPCL Master Programmer ST 6373 $

15 Building Automation Introduction to Control Programming Course Code: ST 103 For users whose role is to work with Powers Process Control Language (PPCL) and the Program Editor. None This web-based training course covers the flow and functionality of creating, editing and saving a building's control program. Define a PPCL program Define how a control program is structured Identify the logical flow of a typical control program Define the 5 steps of writing a control program Navigate and perform multiple operations using Program Editor Save and download a modified program to a field panel Run a Panel PPCL Report for testing and troubleshooting a control program Program Editor Building Automation PPCL Programs PPCL Reports PPCL Programming I Course Code: ST 6304 For users whose role is to read or develop PPCL programs. ST Introduction to Control Programming Learn to develop and modify a PPCL program. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Create a decision table and flowchart for a sequence of operation Use the five-step problem solving process to write PPCL programs Use Datamate Advanced to access the Program Editor application Run PPCL reports using the Report Builder application Describe and use the features of Program Editor Use various navigational tools in Program Editor Write a control LOOP to modulate equipment Use a dead band for cycling equipment on and off Write PPCL code to command FLN devices Use Report Builder to test and troubleshoot programs Use the Point Monitor to monitor point commands by the PPCL program Programming Planning and Flowcharts PPCL Syntax Datamate Advanced Program Editor Point Control FLN Devices Troubleshooting Skills Assessment PPCL Syntax Review Course Code: ST 104 For advanced users who need to write or edit PPCL statements using proper syntax. ST PPCL Programming I This web-based course provides information on PPCL syntax and structure. Use decision tables Identify and interpret flowchart symbols Define Resident Points Understand use of local variables Define Point Status Indicators and Logical Operators Write PPCL statements for a variety of basic control strategies using proper syntax PPCL Rules and Guidelines PPCL Statement Review PPCL Composition 14

16 Building Automation PPCL Programming II PPCL Master Programmer Course Code: ST 6354 For advanced users whose role is to create or modify programs using advanced program control strategies for energy efficiency. ST PPCL Programming I Learn to build and optimize PPCL programs to improve building efficiency and incorporate staging and rotating of equipment. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. Modify system settings to support an Optimized Zone Build a program to support an Optimized Zone (SSTO) Modify programs to automatically rotate equipment based on a schedule or run time Alter programs to ensure the proper number of devices are operating at any given time Adjust LOOP gains to ensure efficient equipment performance Modify an existing program to use the Adaptive Loop Control Add programming code to determine the optimum position of the outside air dampers based on enthalpy Design a program to control a variable volume air handler Ramping Rotating Equipment Staging Equipment Cascading and Floating Loops Adaptive Control Enthalpy Optimization Peak Demand Limiting VAV Control Start/Stop Time Optimization Skills Assessment Course Code: ST 6373 For advanced users whose role is to troubleshoot and to implement programming strategies. ST PPCL Programming I and ST PPCL Programming II This course provides complex PPCL programming scenarios for you to read, troubleshoot and correct. Upon successful completion of the training path, students will earn Master Programmer status. Troubleshoot and correct an air handler control strategy Implement control strategies based on a sequence of operations Identify ways to improve existing control strategies Discuss multiple options for staging and rotating the equipment Daily Weekly Totalization Fail Safe Develop and test a chiller and secondary equipment staging and rotating program Troubleshooting Control Strategies Staging and Rotating Sequencing of Equipment PPCL Scenarios Datamate Advanced 15

17 Building Automation Field Panel and FLN Curriculum Introduction to Terminal Equipment Controllers ST 105 (Web-Based) PXC-Modular Field Panel and TX-I/O ST 106 (Web-Based) $0 $50 Hardware The Field Panel and FLN Curriculum teaches how to use software tools to communicate to the devices at a local level. For assistance in determining the class to attend, contact BT University at btuniversity.i-bt@ siemens.com. Field Panel and FLN Operations ST 5504 $2195 BACnet Field Panel Web Server ST 7454 $2195 DXR and ABT Site Training Contact BT University for DXR and ABT Site training offerings 16

18 Introduction to Terminal Equipment Controllers Course Code: ST 105 For users whose role is to monitor, interpret and command Terminal Equipment Controllers (TECs) direct connection subpoint data. None This web-based training course explains the basic operation, interaction and function of a TEC. State the purpose of TECs Describe the physical components of a TEC Describe how to communicate with a TEC locally Describe the different types of subpoints Set a minimum and maximum room temperature setpoint Trace the generation of the temperature control setpoint TEC Basics TEC Components TEC Subpoints Datamate Base Operations TEC Operations PXC-Modular Field Panel and TX-I/O Course Code: ST 106 For users whose role is to work with the PXC-Modular Field Panel. None This web-based training course explains the operation and features of the PXC- Modular Field Panel. Identify hardware components Describe how to expand the point count of the PXC-Modular field panel Describe the power requirements of the PXC-Modular field panel Identify the available options Identify the features that the PXC-Modular field panel supports on the system architecture Describe the TX-I/O point modules and their use PXC Modular Series Product Overview APOGEE Automation Networking Principles of PXC Modular Operation TX-I/O Product Line Field Panel and FLN Operations Course Code: ST 5504 Building Automation For users whose role is to control and monitor building control systems from field panels and Terminal Equipment Controllers. ST Introduction to Terminal Equipment Controllers Learn to monitor, control and configure building automation systems locally from field panels and FLN devices using Datamate Advanced. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned. This course covers proprietary and BACnet protocols. Communicate with ALN and FLN devices Create and command points at the ALN level Identify the three types of subpoints in a Terminal Equipment Controller Display FLN subpoint information at the field panel Datamate Advanced Field Panel Terminal Emulation System Profile Database Operations Point Operations FLN Hardware Knowledge Assessment Skills Assessment 17

19 Building Automation BACnet Field Panel Web Server Course Code: ST 7454 For users whose role is to use Siemens BACnet Field Panel Web Server to interface with BACnet field panels. None Learn to navigate and edit BACnet field panel databases using Field Panel Web Server. Identify the required hardware that supports the BACnet Web Server Navigate through Siemens Launch Pad Utilize the status bar and navigation pane interfaces and device/points icons and messages Create, edit and assign a Notification Class object Create and modify various point types Utilize Dynamic Trending and Command Priority Array Create a BACnet calendar object, a command object and a schedule object Describe how to compile and debug a program Utilize the FLN Device Editor to view and add FLN devices to the network View, backup and restore a field panel and FLN device Create and edit ALN User Accounts BACnet Field Panel Web Server User Interface Applications Notification Classes Point Editor Point Commander Schedule/Command Object/ Calendar View PPCL Editor System Configuration 18

20 Building Automation Supplemental Training Courses InfoCenter Suite ST 6523 Advanced Graphics ST 6603 $1950 $1950 Fume Hood and Laboratory Room Controls ST 6704 $2195 InfoCenter Suite Course Code: ST 6523 For users whose role is to administer the data collected by an Insight system using InfoCenter Suite software. None Learn to archive, manage and retrieve large amounts of building automation system data for validation compliance and management reporting. Explain how InfoCenter data is generated by an Insight system Mount and dismount volumes Create point groups Annotate and modify point values Identify the different point types and their properties Import and export system data Archive and purge system data Create customized reports Run reports manually or by a schedule System Architecture InfoCenter Administrator InfoCenter Points InfoCenter Data InfoCenter Report Manager 19

21 Building Automation Advanced Graphics Course Code: ST 6603 For users whose role includes updating graphics on the Insight Workstation to match their current equipment layout. ST Insight Workstation I Learn to develop and modify cliparts, air handler and chiller backgrounds and incorporate the Enhanced Graphics Option (EGO) features into new or existing graphics. Use Micrografx Designer to create and edit background graphics and clipart files Access and use the Navigator Library Add or remove Version 2 clipart files to a background Use the Graphics features of Insight to create dynamic graphics Insert animation on a background graphic Create Enhanced Graphic Objects such as; pie charts, bar charts and angular gauges Make the Enhanced Graphic object commandable Import an existing graphic Incorporate changes to an existing graphic Micrografx Designer Navigator Library Insight Graphics Enhanced Graphic Options (EGO) Modify an Existing Graphic Fume Hood and Laboratory Room Controls Course Code: ST 6704 For users whose role is to monitor laboratory controls using an Insight Workstation. None Learn to monitor and control laboratory spaces through hands-on guided exercises and discussions. Identify components of a Fume Hood and Siemens Fume Hood Controls Interpret the readings on an Operator Display Panel Describe how a LCM-OAVS controls room pressurization, ventilation and temperature Describe the sequence of operation for the Siemens Room Condition Monitor (SRCM) and Room Pressure Monitor Use the Insight workstation to monitor and command subpoints Setup and identify supervised points Fume Hood Control Strategy Lab Room Control Strategy Room Pressurization Control and Monitoring Accessing Information Compliance Support Option 20

22 Building Automation Web-Based Training Courses Introduction to Desigo CC ST 101 (Web-Based) $0 Insight Scheduler ST 107 (Web-Based) $50 Insight Basics ST 102 (Web-Based) $0 Insight Trending ST 108 (Web-Based) $50 Introduction to Control Programming ST 103 $0 (Web-Based) Fume Hood and Laboratory Room Controllers ST 109 $50 (Web-Based) PPCL Syntax Review ST 104 (Web-Based) $150 Remote Notification ST 110 (Web-Based) $50 Introduction to Terminal Equipment Controllers ST 105 $0 (Web-Based) MBC-RBC Interactive Technical Manual ST 111 (Web-Based) $0 PXC-Modular Field Panel ST 106 (Web-Based) $50 21

23 Building Automation Our self-paced web-based training allows you to select topics specific to your needs and set your own pace for completing the chosen courses. All course material can be accessed on ES Online: Introduction to Desigo CC Insight Basics Introduction to Control Programming Course Code: ST 101 For users who need an overview of the Desigo CC Management Station. This web-based training course provides an introduction to the Desigo CC Management Station. Platform Design Workflow Applications Course Code: ST 102 For users who need an overview of the Insight Workstation. The web-based training course introduces common Insight applications. Graphics Alarm Status Main Menu Report Viewer Panel Point Log Screen Course Code: ST 103 For users whose role is to work with PPCL and the Program Editor. The web-based training course covers the flow and functionality of creating, editing and saving a building's control program. Program Editor Building Automation PPCL Programs PPCL Reports 22

24 PPCL Syntax Review Course Code: ST 104 For advanced users who need to write or edit PPCL statements using proper syntax. The web-based training course provides information on PPCL syntax and structure. PPCL Rules and Guidelines PPCL Statement Review PPCL Composition Introduction to Terminal Equipment Controllers Course Code: ST 105 For users whose role is to monitor, interpret and command Terminal Equipment Controllers (TECs) direct connection subpoint data. The web-based training course explains the basic operation, interaction and function of a TEC. TEC Basics TEC Components TEC Subpoints Datamate Base Operations TEC Operations PXC-Modular Field Panel and TX-I/O Course Code: ST 106 Building Automation For users whose role is to work on the PXC-Modular Field Panel. The web-based training course explains the operation and features of the PXC- Modular Field Panel. PXC Modular Series Product Overview APOGEE Automation Networking Principles of PXC Modular Operation TX-I/O Product Line Insight Scheduler Course Code: ST 107 For users whose role is to control buildings using the Insight Scheduler application. This web-based training course teaches the terms and concepts of the scheduler application, how to schedule an event and zone, how to populate and schedule a replacement day, how to override an event schedule and how to schedule trend collections and reports. Scheduler Navigation Creating a Schedule Modifying a Schedule Overriding a Schedule Adding Trend Collections, Reports, Events and Zones to a Schedule Insight Trending Course Code: ST 108 For users whose role is to place points into trend using the Insight Workstation. The web-based training course will demonstrate how to place a point into trend and examine trend data using multiple Insight Applications. Trend Concepts Trend Types Trend Definitions Trend Collection Methods Trend Data Detail Report Scheduling Trend Reports Fume Hood and Laboratory Room Controllers Course Code: ST 109 For users whose role is to control fume hoods in a laboratory using the Insight Workstation. The web-based training course explains the basic components of a fume hood and the operations of the controllers. Fume Hood Components Operator Display Panel (ODP) Fume Hood Controller Room Control 23

25 Building Automation Remote Notification (RENO) Course Code: ST 110 For users whose role is to configure or operate the RENO feature within the Insight Workstation. The web-based training course addresses all aspects of the RENO feature in the Insight Workstation from configuring a system setting to setting up a point for remote notification. System Requirements System Settings Creating Contacts Escalation Lists Scheduling Point Setup Heartbeat MBC-RBC Interactive Technical Manual Course Code: ST 111 For users whose role requires technical knowledge of the MBC and RBC field panels. The web-based training course is an interactive technical manual that provides detailed information on the MBC and RBC field panels for quick reference on the job. Enclosure Box Internal Components Open Processor Power Modules Point Termination Modules 24

26 Security Training Offerings

27 Security Security Training Offerings SiPass Access Control ST 4203 SiPass Extended Operations ST 4254 $1650 $2195 SiPass Access Control Course Code: ST 4203 SiPass Extended Operations Course Code: ST 4254 For users whose role is to operate and administer a SiPass Integrated system. None Learn to navigate SiPass Integrated menus and toolbars, cardholder access privileges and define time schedules and holidays. Review basic SiPass Integrated graphical user interface (GUI) functions Configure offline access mode Create and modify work groups, access groups and access levels Use the Find and Group buttons Introduction to SiPass Integrated Access Control System SiPass Integrated Advanced Functions Operator Cardholder Administration and Access Control SiPass Integrated Hardware SiPass Integrated Alarming SiPass Integrated Reporting and Customized Reports For advanced users whose role is to operate and administer a SiPass Integrated system. ST SiPass Access Control Learn advanced SiPass Integrated functions and features, event task programming and system component definitions. Create and implement Site Plans and Graphics Configure and implement Mifare Encoding Perform Alarm Class customization Create and modify customized transaction logs Create customized, automated and actionable reports Review of the SiPass Integrated Access Control System SiPass Integrated Advanced Tasks Advanced SiPass Programming SiPass Integrated Alarming Extended SiPass Integrated Reporting and Customized Reports 26

28 Fire and Life Safety Training Offerings

29 Fire Safety Training by Management Station Introduction to Desigo CC Fire Safety Management Station FIS 411 $100 (Web-Based) Desigo CC Fire Installation and Startup Management Station FIS 4115 NCC - Network Command Center for Desigo Fire Safety Modular FIS 4334 Cerberus DMS Overview FIS 450 (Web-Based) $2500 $1715 $100 Management Station Training Management stations provide centralized monitoring and control of fire safety systems. We offer training on the three platforms; Desigo CC Fire Safety Management, Cerberus Danger Management System (DMS) and the Network Command Center (NCC). All classes provide hands-on training to ensure users are provided with common workflows to monitor vital fire and life safety systems. Cerberus DMS Fire Installation and Startup Management Station FIS 4505 $2500 NCC - Network Command Center for Cerberus PRO Modular FIS 4534 $

30 Introduction to Desigo CC Fire Safety Management Station Course Code: FIS 411 For users whose role requires an understanding of the Desigo CC Fire Safety Management Station. None This web-based course introduces the Desigo CC Fire Safety Management Station. You will learn the features of the management station and the benefits of using Desigo CC to control a Desigo or Desigo Fire Safety Modular system. Key Features of Desigo CC Characteristics of this Full-Featured Management Station Desigo CC Workflow Desigo CC Fire Installation and Startup Management Station Course Code: FIS 4115 For users whose role is to engineer, install or maintain a Desigo CC Management Station. FIS Introduction to Desigo CC Fire Safety Management Learn to monitor and control a Desigo or Desigo Fire Safety Modular system using the Desigo CC Fire Safety Management Station. Explain and install the Desigo CC system and software License a dongle Describe the Graphical User Interface Create a User-Defined and a Physical View Create, edit and delete scopes and macros Create customized reports Create and modify layered graphics Create security groups and user accounts Create, import and modify X-NET and BACnet networks License Management Console (LMC) System Management Console (SMC) UL Template Project User Interface Working with Views Event Treatment Graphics User Administration Macros/Reactions Reports Printing Licensing NCC - Network Command Center for Desigo Fire Safety Modular Course Code: FIS 4334 For users whose role is to engineer, install or maintain a NCC for Desigo Fire Safety Modular system. None Fire Safety Learn to identify NCC system types, discuss hardware configuration, import X-NET and WAN databases and graphics, setup system profiles and monitor and control a Desigo Fire Safety Modular system using NCC. Configure all the appropriate components for both X-NET and WAN topologies Install and license the NCC software Import and edit graphics in the NCC Create and execute macros Create and modify Simple and Log-on Passwords Topology Hardware Installation Software Installation X-NET and WAN Configurations Graphics Macros User Accounts 29

31 Fire Safety Cerberus DMS Overview Course Code: FIS 450 For users whose role requires an understanding of the Cerberus DMS Management Station. This web-based course introduces the Cerberus DMS Management Station. You will learn the features of the management station and the benefits of using Cerberus DMS to control a Cerberus PRO or Cerberus PRO Modular system. Key features of Cerberus DMS Characteristics of this full-featured management station Cerberus DMS Workflow Cerberus DMS Fire Installation and Startup Management Station Course Code: FIS 4505 For users whose role is to engineer, install or maintain a Cerberus DMS Management Station. FIS Cerberus DMS Overview Learn to monitor and control a Cerberus PRO or Cerberus PRO Modular system using the Cerberus DMS Management Station. Explain and install the Cerberus DMS system and software License a dongle Describe the Graphical User Interface Create a User-Defined and a Physical View Create, edit and delete scopes and macros Create customized reports Create and modify layered graphics Create security groups and user accounts Create, import and modify X-NET and BACnet networks Product Overview Software Installation License Management Console (LMC) System Management Console (SMC) UL Template Project User Interface Working with Views Event Treatment Graphics User Administration Macros/Reactions Reports Printing Licensing NCC - Network Command Center for Cerberus PRO Modular Course Code: FIS 4534 For users whose role is to engineer, install or maintain a NCC for Cerberus PRO Modular system. None Learn to identify NCC system types, discuss hardware configuration, import X-NET and WAN databases and graphics, setup system profiles and monitor and control a Cerberus PRO Modular system using NCC. Configure all the appropriate components for both XNET and WAN topologies Install and license the NCC software Import and edit graphics in the NCC Create and execute macros Create and modify Simple and Log-on Passwords Topology Hardware Installation Software Installation X-NET and WAN Configurations Graphics Macros User Accounts 30

32 Fire Safety Desigo Fire Safety Modular Training Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components FIS 251 $50 (Web-Based) Desigo Fire Safety Modular - Installation, Operation and Maintenance FIS 2314 ZEUS - Desigo Fire Safety Modular Programming Tool FIS 2344 Desigo Fire Safety Modular Voice - Installation, Operation and Maintenance FIS 2324 Desigo Fire Safety Modular Advanced Networking FIS 2334 Desigo Fire Safety Modular Global Voice - Advanced Applications FIS 2354 $1715 $1715 $1715 $1715 $1715 Desigo Fire Safety Modular The Desigo Fire Safety Modular is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control. Each course is hands-on in the installation, operation and maintenance of the Desigo Fire Safety Modular system. You will learn common workflows to ensure you can comfortably operate and maintain a Desigo Fire Safety Modular system. The courses build off the preceding course and include topics from basic installation to advanced networking and Global Voice configuration. These courses are for Siemens customers. This fire alarm system is formally known as FireFinder XLS. 31

33 Fire Safety Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components Course Code: FIS 251 For users whose role requires an understanding of the Desigo Fire Safety Modular and the Desigo Fire Safety Modular Voice fire panels. None This web-based training introduces the field devices and components of the Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice fire safety systems. Fire Alarm System Selection Desigo Fire Safety Modular Fire Alarm System Operations Desigo Fire Safety Modular Field Devices Desigo Fire Safety Modular Core System Components Desigo Fire Safety Modular System Components and Options Desigo Fire Safety Modular - Installation, Operation and Maintenance Course Code: FIS 2314 For users whose role is to engineer, install, test or maintain a Desigo Fire Safety Modular System. FIS Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components Learn to install, operate, maintain, test, troubleshoot and wire a Desigo Fire Safety Modular fire alarm system. Update the panel and module firmware including the MLC Create and install maps and icons Silence and reset the panel Install field devices Add devices to the database using ZEUS View and change detector sensitivities Enable and disable points Test, inspect and troubleshoot a Desigo Fire Safety Modular System Basic Control Unit Devices Menu Functions Desigo Fire Safety Modular Programming Tool ZEUS ZEUS - Desigo Fire Safety Modular Programming Tool Course Code: FIS 2344 For users whose role is to administer or program a Desigo Fire Safety Modular system. FIS Desigo Fire Safety Modular - Installation, Operation and Maintenance Learn how to design, modify, test or otherwise use the Desigo Fire Safety Modular system configuration tool (ZEUS). Install and navigate through the ZEUS programming tool Apply the ten steps of programming Create functional block diagrams Use basic and complex logic including inputs and outputs Follow the steps from project specifications to compiling your configuration Use functional diagrams to de-bug your program. Design a Desigo Fire Safety Modular system configuration Basic System Operation Ten Steps to Programming Logic Functions Functional Block Diagrams 32

34 Desigo Fire Safety Modular Voice - Installation, Operation and Maintenance Course Code: FIS 2324 For users whose role is to engineer, install, test, program or maintain a Desigo Fire Safety Modular Voice system. FIS Desigo Fire Safety Modular - Installation, Operation and Maintenance Learn to install, operate, maintain and program the Desigo Fire Safety Modular Voice system. Understand the basic principles of a digital voice system Understand the concept of an 8-channel operation Design a voice system with remote enclosures Navigate through the ZEUS programming tool Operate a Desigo Fire Safety Modular Voice panel in emergency and maintenance situations Voice System Basics 8-Channel Voice Operations Transponders Software Design Desigo Fire Safety Modular Advanced Networking Course Code: FIS 2334 For users whose role is to engineer, install or maintain a Desigo Fire Safety Modular system. FIS Desigo Fire Safety Modular - Installation, Operation and Maintenance Knowledge of the ZEUS software is highly recommended Learn to setup, modify, test, troubleshoot and control a H-NET and X-NET system as well as use the Global PMI monitor. Configure and operate the Desigo Fire Safety Modular in various networking configurations Use the test and maintenance menu Install basic option modules Create and test network configuration databases using the ZEUS software application Install, configure and test fiber optic network modules Setup and operate a X-NET system Install and operate Global PMI monitors Basic System Operations Basic Option Modules Special Option Modules X-NET Global PMIs Monitors Desigo Fire Safety Modular Global Voice - Advanced Applications Course Code: FIS 2354 Fire Safety For users whose role is to engineer, install or maintain a Desigo Fire Safety Modular Global Voice system. FIS Desigo Fire Safety Modular - Installation, Operation and Maintenance Completion of the FIS Desigo Fire Safety Modular Advanced Networking is helpful Comprehensive knowledge and the ability to work in the ZEUS programming tool is strongly recommended Learn to install, program and operate a global-advanced Desigo Fire Safety Modular Voice system. Understand the basic principles of the Desigo Fire Safety Modular Global Voice system Install the necessary hardware Use the ZEUS programming tool to program a Desigo Fire Safety Modular Voice with Advanced Global Applications Operate a Desigo Fire Safety Modular Global Voice panel in emergency and maintenance situations Global Voice System Basics Software Design 33

35 Fire Safety Desigo Life Safety Training Desigo Life Safety UL System Overview FIS 900 (Web-Based) $50 Desigo Life Safety UL System Overview Desigo Life Safety UL 50 PT FIS 9102 Desigo Life Safety UL 250/500 PT FIS 9104 Desigo Life Safety UL Voice FIS 9124 $1085 $1715 $2020 Course Code: FIS 900 For users whose role requires an understanding of the Desigo Life Safety UL system. None This course is an introduction to the Desigo Life Safety UL system. Students will learn about the Desigo Life Safety UL portfolio and the devices available. What is Desigo System Overview FCnet Stations FDnet Peripherals Tools Documentation Available 34

36 Desigo Life Safety UL 50 PT Course Code: FIS 9102 For users whose role is to engineer, install or maintain a Desigo Life Safety UL 50 point panel system. FIS Desigo Life Safety UL System Overview Learn to install, operate, maintain, test, troubleshoot and program the Desigo Life Safety 50 point panel system. Silence and reset the panel Configure and print reports Create a Desigo Life Safety configuration Install and navigate the FXS901-U2 software Use the steps from project specification to complete and compile your configurations Understand basic and complex control logic including inputs and outputs Basic Control Unit Devices Menu Functions Desigo Fire Safety Configuration Tool Basic System Operation Programming Steps Control Functions Desigo Life Safety UL 250/500 PT Course Code: FIS 9104 For users whose role is to engineer, install or maintain a Desigo Life Safety UL 250/500 point panel system. FIS Desigo Life Safety UL System Overview Learn to install, operate, maintain, test, troubleshoot and wire a Desigo Life Safety system using a 250/500 point panel. Acknowledge Alarms, Supervisories, Troubles and Securities Install field devices Enable and disable points Create a Desigo Life Safety configuration Create detection zones Troubleshoot a Desigo Life Safety system Basic Control Unit Basic System Operations Devices Menu Functions Desigo Fire Safety Engineering Tool Desigo Life Safety UL Voice Course Code: FIS 9124 For users whose role is to engineer, install, maintain or program a Desigo Life Safety Voice system. FIS Desigo Life Safety UL 250/500 PT Fire Safety Learn to install, operate, maintain, test, troubleshoot and wire a Desigo Life Safety Voice system using a 250/500 point panel. Describe the components used with the voice architecture Draw a basic Desigo Voice wiring diagram Use the configuration tool to build basic voice system programs Demonstrate LED behavior for voice priority activations on a voice panel Create advanced voice systems with custom designed audio libraries Create and commission a voice network Basic Control Unit and Hardware Basic System Operations Desigo Fire Safety Engineering Tool Networking 35

37 Fire Safety Cerberus PRO Modular Training Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components FIS 252 (Web-Based) Cerberus PRO Modular - Installation, Operation and Maintenance FIS 2514 ZEUS - Cerberus PRO Modular Programming Tool FIS 2544 Cerberus PRO Modular Voice - Installation, Operation and Maintenance FIS 2524 $1715 Cerberus PRO Modular Advanced Networking FIS 2534 $50 $1715 $1715 $1715 Cerberus PRO Modular The Cerberus PRO Modular is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control. Each course is hands-on in the installation, operation and maintenance of the Cerberus PRO Modular system. You will learn common workflows to ensure you can comfortably operate and maintain a Cerberus PRO Modular system. The courses build off the preceding course and include topics from basic installation to advanced networking and Global Voice configuration. These courses are for Siemens Solution Partners and customers. This fire alarm system is formally known as FireFinder XLS. Cerberus PRO Modular Global Voice - Advanced Applications FIS 2554 $

38 Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components Course Code: FIS 252 For users whose role requires an understanding of the Cerberus PRO Modular and Cerberus PRO Modular Voice panels. None This web-based training introduces the field devices and components of the Cerberus PRO Modular and Cerberus PRO Modular Voice fire safety systems. Fire Alarm System Selection Cerberus PRO Modular Fire Alarm System Operations Cerberus PRO Modular Field Devices Cerberus PRO Modular Core System Components Cerberus PRO Modular System Components and Options Cerberus PRO Modular - Installation, Operation and Maintenance Course Code: FIS 2514 For users whose role is to engineer, install, test or maintain a Cerberus PRO Modular system. FIS Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components Learn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO Modular fire alarm system. Update the panel and module firmware including the MLC Create and install maps and icons Silence and reset the panel Install field devices Add devices to the database using ZEUS Enable and disable points Test, inspect and troubleshoot a Cerberus PRO Modular System Basic Control Unit Devices Menu Functions Cerberus PRO Modular Programming Tool ZEUS ZEUS - Cerberus PRO Modular Programming Tool Course Code: FIS 2544 Fire Safety For users whose role is to administer or program a Cerberus PRO Modular system. FIS Cerberus PRO Modular - Installation, Operation and Maintenance Learn how to design, modify, test or otherwise use the Cerberus PRO Modular system configuration tool (ZEUS). Install and navigate through the ZEUS programming tool Apply the ten steps of programming Create functional block diagrams Use basic and complex logic including inputs and outputs Follow the steps from project specifications to compiling your configuration Use functional diagrams to de-bug your program. Design a Cerberus PRO Modular system configuration Basic System Operation Ten Steps to Programming Logic Functions Functional Block Diagrams 37

39 Fire Safety Cerberus PRO Modular Voice - Installation, Operation and Maintenance Course Code: FIS 2524 For users whose role is to engineer, install, test, program or maintain a Cerberus PRO Modular Voice system. FIS Cerberus PRO Modular - Installation, Operation and Maintenance Learn to install, operate, maintain and program the Cerberus PRO Modular Voice system. Understand the basic principles of a digital voice system Understand the concept of an 8-channel operation Design a voice system with remote enclosures Navigate through the ZEUS programming tool Operate a Cerberus PRO Modular Voice panel in emergency and maintenance situations Voice System Basics 8-Channel Voice Operations Transponders Software Design Cerberus PRO Modular Advanced Networking Course Code: FIS 2534 For users whose role is to engineer, install or maintain a Cerberus PRO Modular system. FIS Cerberus PRO Modular - Installation, Operation and Maintenance Knowledge of the ZEUS software is highly recommended Learn to setup, modify, test, troubleshoot and control a H-NET and X-NET system as well as use the Global PMI monitor. Configure and operate the Cerberus PRO Modular in various networking configurations Use the test and maintenance menu Install basic option modules Create and test network configuration databases using the ZEUS software application Install, configure and test fiber optic network modules Setup and operate a X-NET system Install and operate Global PMI monitors Basic System Operations Basic Option Modules Special Option Modules X-NET Global PMIs Monitors Cerberus PRO Modular Global Voice - Advanced Applications Course Code: FIS 2554 For users whose role is to engineer, install or maintain a Cerberus PRO Modular Global Voice system. FIS Cerberus PRO Modular - Installation, Operation and Maintenance Completion of the FIS Cerberus PRO Modular Advanced Networking is helpful Comprehensive knowledge and the ability to work in the ZEUS programming tool is strongly recommended Learn to install, program and operate a global-advanced Cerberus PRO Modular Voice system. Understand the basic principles of the Cerberus PRO Modular Global Voice system Install the necessary hardware Use the ZEUS programming tool to program a Cerberus PRO Modular Voice with Advanced Global Applications Operate a Cerberus PRO Modular Global Voice panel in emergency and maintenance situations Global Voice System Basics Software Design 38

40 Fire Safety Cerberus PRO Training Cerberus PRO Overview FIS 950 (Web-Based) $50 Cerberus PRO Cerberus PRO UL 250/500 PT FIS 9504 Cerberus PRO UL Voice FIS 9524 $1715 $2020 Cerberus PRO is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control. Each course is hands-on in the installation, operation and maintenance of the Cerberus PRO system. You will learn common workflows to ensure you can comfortably operate and maintain a Cerberus PRO system. These courses are for Siemens Solution Partners and customers. 39

41 Fire Safety Cerberus PRO Overview Course Code: FIS 950 For users whose role requires an understanding of the Cerberus PRO system. None This course is an introduction to the Cerberus PRO system. You will learn about the Cerberus PRO UL portfolio and the devices available. What is Cerberus PRO System Overview FCnet Stations FDnet Peripherals Tools Documentation Available Cerberus PRO UL 250/500 PT Course Code: FIS 9504 For users whose role is to engineer, install, maintain or program a Cerberus PRO 250/500 point panel system. FIS Cerberus PRO Overview Learn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO system using a 250/500 point panel. Acknowledge Alarms, Supervisories, Troubles and Securities Install field devices Enable and disable points Create a Cerberus PRO configuration Create detection zones Troubleshoot a Cerberus PRO system Basic Control Unit Basic System Operations Devices Menu Functions Cerberus PRO Engineering Tool Cerberus PRO UL Voice Course Code: FIS 9524 For users whose role is to engineer, install, maintain or program a Cerberus PRO Voice system. FIS Cerberus PRO UL 250/500 PT Learn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO Voice system using a 250/500 point panel. Describe the components used with the Voice architecture Draw a basic Cerberus PRO Voice wiring diagram Use the configuration tool to build basic voice system programs Demonstrate LED behavior for voice priority activations on a voice panel Create advanced voice systems with custom designed audio libraries Create and commission a voice network Basic Control Unit and Hardware Basic System Operations Cerberus PRO Fire Safety Engineering Tool Networking 40

42 Fire Safety MXL Training MXL and MXLV Fire Panel and Components FIS 150 (Web-Based) MXL - Installation, Operation and Maintenance FIS 1114 Acculink - MXL Programming Tool FIS 1144 $50 $1715 $1715 MXL MXL is one of the most successfully installed analog fire protection system in the US marketplace. It offers basic analog fire control panels and detectors that can be networked to meet changing needs. Each course is hands-on in the installation, operation and maintenance of the MXL system. You will learn common workflows to ensure you can comfortably operate and maintain a MXL system. MXL Voice - Installation, Operation and Maintenance FIS 1124 $1715 MXL Advanced Networking FIS 1134 $

43 Fire Safety MXL and MXLV Fire Panels and Components MXL - Installation, Operation and Maintenance Acculink - MXL Programming Tool Course Code: FIS 150 For users whose role requires an understanding of the MXL or MXL Voice Fire Safety system. None This web-based training introduces field devices and components of the MXL and MXLV fire safety systems. Fire Alarm System Selection MXL Fire Alarm System Operation MXL Field Devices MXL Core System Components MXL System Components and Options Course Code: FIS 1114 For users whose role is to engineer, install, test or maintain a MXL system. FIS MXL and MXLV Fire Panels and Components Learn to install, operate, maintain, test, troubleshoot and wire a MXL advanced microprocessor-based fire alarm system. Silence and reset the panel Install field devices Add devices to the database using Acculink View and change detector sensitivities Enable and disable points Create and transfer MXL configurations Test, inspect and troubleshoot a MXL system Basic System Operation Devices Menu Functions MXL Programming Tool (Acculink) Course Code: FIS 1144 For users whose role is to program a MXL system. FIS MXL - Installation, Operation and Maintenance Learn to use the MXL programming tool, Acculink (CSG-M), to design a MXL fire alarm system. Install and navigate through the Acculink software Apply CSG-M and MXL security Follow the steps from project specifications to compiling your configuration Use basic and complex logic including inputs and outputs Create functional block diagrams Use functional diagrams to input programs into the software Apply the ten steps of programming Design a MXL fire alarm system configuration Basic System Operations Ten Steps to Programming Logic Functions Functional Block Diagrams 42

44 Fire Safety MXL Voice - Installation, Operation and Maintenance Course Code: FIS 1124 For users whose role is to engineer, install, maintain or operate a MXL Voice system. FIS MXL - Installation, Operation and Maintenance Learn to install, operate and maintain an MXLV integrated voice evacuation system. Understand the basic principles of an analog voice system Install proper shielding Explain the concepts of various Zone cards used for audio distribution Install networks for voice systems including master/remote and peer-to-peer networks Install proper shielding for lowlevel and high-level audio Operate a MXL Voice panel in emergency and maintenance situations Voice System Basics 3-Channel Voice Transponders Shielding MXL Advanced and Networking Course Code: FIS 1134 For users whose role is to engineer, install or maintain a MXL networked system. FIS MXL - Installation, Operation and Maintenance Knowledge of the Acculink software is highly recommended Learn to setup, modify, test, troubleshoot and control a M-NET and X-NET system as well as use the Global MKB monitor. Operate and configure a MXL X-NET system Use the operational features of the MXL system Install basic option modules Program a MXL network using Acculink Install special option modules Setup and operate a X-NET system Setup inter-panel logics Install and operate Global MKBs Basic System Operations Basic Option Modules Special Option Modules X-NET Logic Functions Global MKB Monitors 43

45 Fire Safety Additional Training Offerings Sinorix Engineering and Design FIS 6213 Sinorix Engineering and Design Course Code: FIS 6213 VEDSA System Design and Maintenance FIS 7114 $1645 $1715 VESDA System Design and Maintenance Course Code: FIS 7114 For users whose role is to design or manage a Sinorix system. None Learn to design a Sinorix 227 system using Siemens Sinorix 227 FlowCalc software. Understanding flooding agents and how to protect a hazard Describe hardware components including cylinders, valves and nozzles Use Sinorix 227 FlowCalc software to predict flow Design and build an isometric pipe network Describe enclosure integrity testing Sinorix Hardware Software Project Management For users whose role is to engineer, install or maintain a VESDA Air Sampling system. None Learn to engineer, design, install, maintain and troubleshoot the VESDA Air Sampling Smoke Detection (ASSD) system. Understand various common applications for ASSD systems Design, install, commission and operate the VESDA system Use the pipe design program (Aspire) to validate the air sampling design Applications Codes and Standards Operations Hardware Detectors Programming Display Network Pipe Design Programs 44

46 Certification Training Offerings

47 Certification Certification Courses KNX Basic Certification (GAMMA Lighting) KNX 4204 $2500 KNX Advanced Certification (GAMMA Lighting) KNX 4215 $2500 KNX Basic Certification (GAMMA Lighting) KNX Advanced Certification (GAMMA Lighting) Course Code: KNX 4204 Course Code: KNX 4215 For users whose role requires training on the KNX Technology. For advanced users whose role requires training on the KNX Technology. Students should have an understanding of basic electrical installation and completed the required prework Learn the basics of data transmission for KNX communication technology. KNX KNX Basic Certification (GAMMA Lighting) Learn advanced KNX features needed for building management system integration such as BACnet and TRA. Understand the fundamentals for serial data transmissions Review the KNX Technology Know the available bus devices in accordance with the product database Design, program and function the latest version of ETS Configure and commission a sample project Fundamentals Bus Device ETS (Engineering Tool Software) Understand Fail-safe planning Review KNX and Smart Metering/ Smart Grid Applications Know the available bus devices in accordance with the product database Know the latest revision ETS applications Understand lighting controls Understand the BACnet gateway Fundamentals Bus Devices ETS (Engineering Tool Software) 46

48 Training Enrollment Form Please the completed enrollment form to BT University at We will notify you within two business days after we receive your enrollment form. STUDENT INFORMATION *Required Fields Student Name * : Student Phone No: Fax No: Company Name * : Service Agreement Student s Company Address * : Company Mailing Address * : City * : State * : ZIP * : Supervisor s Name * : Supervisor s * : Supervisor s Signature * : Supervisor s Phone No * : We are (choose one): Siemens Distributor End User Other If End User or Other, your Supplier is a * : Siemens Distributor Other Supplier Company Name (who services your equipment/order parts from) * : City: State: ZIP: Local Contact at Supplier Company * : Contact s Phone or * : Sales Rep s Name: Client Service Admin/Engineer's Name: COURSE INFORMATION Course Name & Number * : Class Dates * : Location * : Dietary Restrictions: BILLING ADDRESS Same as Student Information Billing Address * : City * : State * : ZIP * : Phone No: Fax: PAYMENT INFORMATION * Purchase Order #: Check #: Job #: SAP Customer Sold To #: Credit Card: VISA MC AMEX (Contact your local Siemens office if you do not have this information) If you are paying with a credit card, provide the name of the person responsible for payment. Please do not provide the credit card details on this form. Cardholder's Name: Cardholder's Phone Number: Cardholder's Address: Cardholder's Signature: Student Cancellation Policy: Students who cancel within 22 calendar days of the class start date will be charged 50% of the tuition. Students will be charged 100% of the tuition if they cancel the day of the class or do not attend. The cancellation fee may be waived if your organization sends a qualified student as a substitute. Cancellation request need to be requested on Note: Siemens BT University reserves the right to cancel classes and assumes no liability for expenses incurred by students due to class cancellation. All students will be notified of cancellations approximately one month before classes begin. 47

49 Notes Notes: 48

50 Siemens Building Technologies 950 Deerfield Parkway Buffalo Grove, IL USA Use your mobile device to scan the QR code for more information Printed in the USA Copyright 2018 Siemens Building Technologies. All rights reserved. Printed in the USA. APOGEE and Desigo CC are registered trademark of Siemens Building Technologies. Company and product names mentioned in this manual are trademarks or registered trademarks of their respective companies. BACnet is a registered trademark of ASHRAE.