EN 60529:1991+A1:2000+A2:2013 Measurement and Test Report

Size: px

Start display at page:

Download "EN 60529:1991+A1:2000+A2:2013 Measurement and Test Report"

Toby Gardner
6 years ago
Views:

1 EN 60529:1991+A1:2000+A2:2013 Measurement and Test Report For Fujian Juston Electronic Equipment Co.,Ltd No.115,117,119,Yuantai 3rd Road,Jiangnan Hi-tech Park,Licheng District, Quanzhou,Fujian,China Test Multiple Model: HYDX-D52,D56,D58 This Report Concerns: Original Report Equipment Type: Digital Two Way Radio DMR Test Engineer: Colin Zhang Test Date: Reviewed By: Alice Liu Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69,Pulongcun, Puxinhu Industrial Zone Tangxia Town Dongguan, Guangdong CHINA Note: This test report is specially limited to the above client company and product model only. It may not be duplicated without prior written consent of Bay Area Compliance Laboratories Corp. (Dongguan). This report is valid digital signature. The digital signature may be available only under the Adobe software above version 7.0

2 TABLE OF CONTENTS 1 - GENERAL INFORMATION Product Description for Equipment under Test (EUT) Objective Related Submittal(s)/Grant(s) Test Methodology Test Equipment List Equipment Under Test (EUT) DUST TEST FOR FIRST CHARACTERISTICS NUMERALS 6 (IP6X) (CLAUSE ) Method Results TEST FOR PROTECTION AGAINST WATER CHARACTERISTICS NUMERALS 6(IPX6) (CLAUSE ) Method Results EUT PHOTOGRAPHS EUT- IP6X dust test EUT- no deposit of dust was observable inside the enclosure after the IP6X test EUT- Whole view of the unit proceed IPX6 test EUT- normal working after the IPX6 test EUT- after IPX6 test... 8 Page 2 of 8

3 1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) The Fujian Juston Electronic Equipment Co., Ltd., product, the "EUT" as referred to in this report is Digital Two Way Radio DMR. The test model is HYDX-D50 and the multiple is HYDX-D52,D56,D Objective The following Declaration of Conformity of a device is prepared on behalf of Fujian Juston Electronic Equipment Co., Ltd.. In accordance with EN 60529:1991+A1:2000+A2:2013, Degrees of protection provided by enclosures (IP code). The objective of the manufacturer is to demonstrate compliance with EN 60529: A1:2000+A2:2013. Currently, EN 60529:1991+A1:2000+A2:2013 tests to be performed. They are as follows: -Test for protection against solid foreign objects and for protection against spraying and splashing water (IP66) (CLAUSE and CLAUSE ) Data has been collected, reduced, and analyzed within this report in accordance with EN 60529:1991+ A1:2000+A2:2013. In order to demonstrate compliance, the manufacturer or a contracted laboratory makes measurements and takes the necessary steps to ensure that the equipment complies with the appropriate technical standards. 1.3 Related Submittal(s)/Grant(s) No Related Submittals 1.4 Test Methodology All measurements contained in this report were conducted with EN 60529:1991+A1:2000+A2:2013, Degrees of protection provided by enclosures (IP code). All measurement was performed at Bay Area Compliance Laboratories Corp. (Dongguan). 1.5 Test Equipment List S/N Manufacturer and Model Instrument Type Instrument I.D Cal. Last Date Cal. Due Date 1 FTR/3301B Dust proof test chamber FTR/8102A 1.6 Equipment under Test (EUT) IPX6 splashing water Tester Manufacturer Description Model Fujian Juston Electronic Equipment Co.,Ltd Manufacturer address Safety Class Brand Name Cert. Digital Two Way HYDX-D50 II HYDX DOC Radio DMR No.115,117,119,Yuantai 3rd Road,Jiangnan Hi-tech Park,Licheng District, Quanzhou,Fujian,China Page 3 of 8

4 2- Dust test for first characteristics numerals 6 (IP6X) (CLAUSE ) 2.1 Method Test device to verify protection against solid foreign objects like the follow figure. 1) The test is made using a dust chamber incorporating the basic principle shown in the following figure; 2) The enclosure under test is supported inside the test chamber and the pressure inside the enclosure is maintained below the surrounding atmospheric pressure by a vacuum pump. The suction connection shall be made to a hole specially provided for this test; 3) The extraction rate is about 60 times volumes of the sample enclosure per hour and the depression of the manometer is less than 2kPa; 4) The test duration is 2 hours. 2.2 Results (x) No talcum powder accumulated in a quantity or location that could interfere with the correct operation of the equipment or impair safety; (x) No deposit of dust could lead to tracking along the creepage distances. (IP6X)(CLAUSE ). Pass Page 4 of 8

5 3- Test for protection against water characteristics numerals 6(IPX6) (CLAUSE ) 3.1 Method Test device to verify protection against splashing water jets (hose nozzle) like the follow figure. 1) Internal diameter of the nozzle: 12,5mm; 2) Delivery rate: 100 l/min +/-5%; 3) Water pressure: to be adjusted to achieve the specified delivery rate; 4) Core of the substantial stream: circle of approximately 120 mm diameter at 2.5 m distance from nozzle; 5) Test duration per square meter of enclosure surface area likely to be sprayed: 1 min; 6) Minimum test duration: 3 min; 7) Distance from nozzle to enclosure surface: between 2,5mm and 3 m. 3.2 Results (x) After the test, the sample can work properly, no safety hazard. (x) Some water has entered, but not deposit on insulation parts where it could lead to tracking along the creepage distance. (x) The EUT complies with the requirement for protection against water characteristics numerals 6 (IPX6) (CLAUSE14.2.6) Pass Page 5 of 8

6 4 EUT PHOTOGRAPHS 4.1 EUT- EUT- Whole view of the unit proceed IP6X test 4.2 EUT- no deposit of dust was observable inside the enclosure after the IP6X test Page 6 of 8

7 4.3 EUT- Whole view of the unit proceed IPX6 test 4.4 EUT- normal working after the IPX6 test Page 7 of 8

8 4.5 EUT- after the IPX6 test Page 8 of 8

TEST REPORT Report No.: HN80013/2011 Page: 1 of 7 Date: August 30, 2011

TEST REPORT Report No.: HN80013/2011 Page: 1 of 7 Date: August 30, 2011 Page: 1 of 7 Date: August 30, 2011 GLACIALTECH INC. 9FL, NO. 352, SEC. 2, JUNG SHAN RD., JUNG HE CITY, TAIPEI, TAIWAN The following merchandise was submitted and identified by the vendor as: Product Description: